In This Section. In This Section Fall Protection. Anchorage Connector. Body Wear (Harness) Connecting Device

Transcription

1 In This Section Fall Protection The ABC s of Fall Protection The key components of a Personal Fall Protection System can be broken down into three categories. All three must be in place and properly used to provide maximum worker protection. Anchorage Connector Anchorage Connectors are used to join the connecting device to the anchorage point. Anchorage Connectors include cross-arm straps, beam anchors, D-bolts and hook anchors An anchorage point or tie-off point is the area that supports the entire weight of the system and might include I-beams, rebar, scaffold structural members or lifelines In This Section Harnesses Lanyards Self-Retracting Lifelines Ropes/Ladders Anchors Carabiners Protective Caps Body Wear (Harness) Body Wear is the personal protective equipment worn by the worker, such as a fullbody harness. When choosing a harness, you have a variety of options, including: D-Ring Location Center/Back D-Rings are found on every harness and are the only connective point allowed for fall arrest scenarios Side D-Rings are commonly used for positioning applications when workers need their hands free during certain work functions Chest D-Rings are used for positioning work, such as ladder climbing application Shoulder D-Rings are commonly used for lowering workers into tight confined spaces Buckle Style Mating Buckles are the most common buckle style used by workers who do not share their harness Tongue Buckles are similar to a standard belt buckle. This type of buckle is ideal for those who share their harness. Material is generally a little thicker and stiffer in the tongue buckle area. Friction Buckles or Parachutes Buckles are easy to adjust between various workers. Simply step into the leg holes and pull the straps tight. Quick Connect Buckles cannot accidentally disengage while the harness is worn. Most workers find this specialty buckle easy to attach/detach. Mating Buckle Tongue Buckle Friction Buckle Quick Connect Buckle Harness Material Nylon provides excellent strength and comfort Polyester provides excellent chemical resistance in harsh environments DuraFlex is a combination synthetic nylon, polyester and specially formulated elastomer webbing that will stretch slightly when an employee walks and bends Nomex/Kevlar is flame-retardant and is commonly used in welding situations Connecting Device Connecting Devices are the critical link which joins the body wear to the anchorage connector. Connecting Devices include shock-absorbing lanyards, self-retracting lifelines, rope and grabs All our Harnesses and Lanyards are non-returnable, without prior approval from the manufacturer. 247

2 Fall Protection Harnesses Standard/Economy Harnesses Harnesses are designed to retain the user in the event of a fall and distribute the impact (fall arrest) forces throughout the thighs, buttocks, chest and shoulders. All styles meet applicable OSHA and ANSI standards. Miller HP 650 Full Body Harnesses are available in Lightweight and Heavy-Duty styles for all of your general construction applications. Standard features include: strap keepers, extra-long leg and sub-pelvic straps, lanyard clip and 4 harness loops for installing a tool belt comes with a tool belt, waist pads and shoulder pads. Miller HP 850 DuraLite Harness is extremely lightweight (just over 2 lbs.) and durable to produce maximum worker mobility. This harness features mating-leg buckles and color-coded straps. Strong nylon webbing ensure long life. Miller Titan Harnesses provide Titanic fall protection for the most rigorous work environments. Non-slip chest strap assures a proper fit and the sub-pelvic strap provides added safety and support. The T-Flex Stretchable Harness features a stretchable webbing that moves with you to produce greater comfort and added mobility. DBI-Sala Vest-Type Full Body Harness is manufactured from high-strength, durable polyester webbing. Color-coded straps and metal-to-metal mating-type leg buckles allow for easy donning. Harnesses with friction buckle and adjustable tongue buckle leg straps are extremely durable and lightweight (2.4 and 2.7 lbs. respectively). Harness with shoulder D-rings weighs only 3.2 lbs. and provides comfort without limiting mobility. All styles come with a friction adjuster on lower shoulder straps. North Durabilt Harness is universally-sized and constructed with a polyester webbing for greater resistance to chemicals. MSA TechnaCurv Full Body Harness features a Curvilinear torso webbing that curves around the neck area to help prevent chafing and discomfort. Adjustable Y-back D-locator pad lets you adjust the back D-ring to provide proper harness fit. Shoulder and sub-pelvic straps feature Sorbtek fabric, a lightweight material designed to wick moisture away from the body. MSA FP Pro Harness is a vest-style harness provides comfortable, all-day protection with a lightweight design and durable webbing. Color contrasting torso and leg straps simplify donning. Leg and chest straps feature mating buckles for easy adjustment. MSA Workman Harness features lightweight components and durable webbing, making this vest-style harnesses a comfortable and economical choice. Color-contrasting black thigh and high-visibility yellow torso straps simplify donning. The web retainer collars keep the excess webbing in order. Chest Buckle Leg Buckle D-Rings Capacity Size Miller HP 650 Lightweight Full Body Harness Mating Mating Back 400 lbs. Universal $ HP 650 Lightweight Full Body Harness Mating Mating Back, Side 400 lbs. Universal HP 650 Heavy-Duty Full Body Harness Mating Tongue Back 400 lbs. Universal HP 650 Heavy-Duty Full Body Harness Mating Tongue Back, Side 400 lbs. Universal HP 650 Heavy-Duty Full Body Harness Mating Mating Back, Side 400 lbs. Universal HP 850 DuraLite Harness Mating Mating Back 400 lbs. Universal Titan T-Flex Harness Mating Tongue Back, Side 310 lbs. Universal Titan T-Flex Harness Mating Mating Back 310 lbs. Universal Titan Non-Stretch Harness Mating Mating Back 310 lbs. Universal Titan Non-Stretch Harness Mating Tongue Back, Side 310 lbs. Universal DBI-Sala Vest-Type Full Body Harness Mating Mating Back 420 lbs. Universal Vest-Type Full Body Harness Mating Friction Back 420 lbs. Universal Vest-Type Full Body Harness Mating Tongue Back 420 lbs. Universal Vest-Type Full Body Harness Mating Tongue Back, Shoulder 420 lbs. Universal North Durabilt Harness Mating Mating Back 310 lbs. Universal Durabilt Harness Mating Tongue Back, Side 310 lbs. Universal MSA TechnaCurv Full Body Harness Mating Tongue Back 400 lbs. Universal FP Pro Harness Mating Mating Back 360 lbs. Universal Workman Harness Mating Mating Back 400 lbs. X-Small Workman Harness Mating Mating Back 400 lbs. Small Large Workman Harness Mating Mating Back 400 lbs. X-Large Workman Harness Mating Mating Back 400 lbs. XX-Large Workman Harness Mating Mating Back, Side 400 lbs. X-Small Workman Harness Mating Mating Back, Side 400 lbs. Small Large Workman Harness Mating Mating Back, Side 400 lbs. X-Large Workman Harness Mating Mating Back, Side 400 lbs. XX-Large Workman Harness Mating Tongue Back 400 lbs. X-Small Workman Harness Mating Tongue Back 400 lbs. Small Large Workman Harness Mating Tongue Back 400 lbs. X-Large Workman Harness Mating Tongue Back 400 lbs. XX-Large Workman Harness Mating Tongue Back, Side 400 lbs. X-Small Workman Harness Mating Tongue Back, Side 400 lbs. Small Large Workman Harness Mating Tongue Back, Side 400 lbs. X-Large Workman Harness Mating Tongue Back, Side 400 lbs. XX-Large

3 Harnesses Fall Protection Miller Harnesses are universally sized to fit most waists from 36" 52". Miller HP 650 Lightweight Full Body Harness Miller HP 850 DuraLite Harness Miller Titan Harness DBI-Sala Vest-Type Full Body Harness with Tongue Buckle Leg Straps DBI-Sala Harnesses are universally sized to fit most workers up to 6'3" tall, 250 lbs. DBI-Sala Vest-Type Full Body Harness with Mating Buckle Leg Straps DBI-Sala Vest-Type Full Body Harness with Friction Buckle Leg Straps North Durabilt Harness MSA TechnaCurv Full Body Harness MSA FP Pro Harness MSA Workman Harnesses 249

4 Fall Protection Harnesses Premium Padded Harnesses Premium Padded Harnesses are easier to put on and more comfortable to wear. Choose from models with a wide variety of padding and D-ring locations. Quick connect leg buckles allow for single-handed operation and easy adjustments. All styles meet applicable OSHA and ANSI standards. Miller Revolution Harness features an ErgoArmor back shield that minimizes impact from sharp and heavy snap hooks and lifelines. The integrated accessory system provides a PivotLink connection for belts, tools and accessories. The torso cam buckle allows for one-handed release and simultaneous adjustment of the shoulder straps. DualTech Webbing offers a soft, textured inside and a durable, chemical-resistant outer material. DuraFlex Webbing is constructed of a patented elastomer that is specially formulated to stretch. DBI-Sala Exofit Construction and Tower Climbing Harnesses provides the ultimate in no-tangle donning and security. Simply put the ExoFit on, adjust the straps and the harness remembers the adjustment. The cushioned shoulder pads are built-in, so they won t slip or slide and the cushioned leg, hip and seat straps provide additional security during a fall. Breathable Dri-lex lining draws moisture away to keep you dry and comfortable. Tower Climbing Harness offers the added features of a chest D-ring, a belt with side D-rings and a seat sling with D-rings. DBI-Sala Exofit XP Harness wraps around the wearer for no-tangle donning and comfortable security. The 5-point adjustment system provides a perfect fit every time. The spring-loaded back D-ring stands up to ensure an easy connection. Back D-ring also features a built-in impact indicator. The quick connect buckles are color coded for easier donning. The padding is removable and washable. MSA TechnaCurv Full Body Harness features a Curvilinear torso webbing that curves around the neck area to help prevent chafing and discomfort. Adjustable Y-back D-locator pad lets you adjust the back D-ring to provide proper harness fit. Shoulder and sub-pelvic straps feature Sorbtek fabric, a lightweight material designed to wick moisture away from the body. North Rite-On Harness is designed to hold its shape and provide all-day comfort. The harness is constructed with a comfortable shoulder pad to make donning a breeze and eliminate the tangling of straps. Unit features D-ring on the back. Miller Revolution Harness DBI-Sala Exofit Construction Harness DBI-Sala Exofit Tower Climbing Harness DBI-Sala Exofit XP Harness MSA TechnaCurv Full Body Harness North Rite-On Harness 250 Chest and Leg Buckles D-Rings Padding Capacity Size Miller Revolution Harness with DualTech Webbing Quick Connect Back Back 400 lbs. Universal $ Revolution Harness with DuraFlex Webbing Quick Connect Back Back 400 lbs. Universal DBI-Sala Exofit Construction Harness Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" 44" Waist Exofit Construction Harness Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" 48" Waist Exofit Tower Climbing Harness Quick Connect Back, Side, Chest Shoulder, Legs 420 lbs. Medium, 36" 44" Waist Exofit Tower Climbing Harness Quick Connect Back, Side, Chest Shoulder, Legs 420 lbs. Large, 40" 48" Waist Exofit XP Harness Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" 44" Waist Exofit XP Harness Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" 48" Waist Exofit XP Harness Quick Connect Back, Side Shoulder, Legs 420 lbs. Medium, 36" 44" Waist Exofit XP Harness Quick Connect Back, Side Shoulder, Legs 420 lbs. Large, 40" 48" Waist MSA TechnaCurv Full Body Harness Quick Connect Back Shoulder 400 lbs. Universal TechnaCurv Full Body Harness Quick Connect Back Shoulder, Sub-Pelvic 400 lbs. Universal TechnaCurv Full Body Harness Mating Back, Side, Chest Shoulder, Sub-Pelvic 400 lbs. Universal North Rite-On Harness Quick Connect Back Shoulder 310 lbs. Universal

5 Harnesses Fall Protection Harnesses with an Extended Back D-Ring Harnesses with an Extended Back D-Ring makes lanyard attachment easier and allows for inspection of the snap hook closure. All styles meet applicable OSHA and ANSI standards. MSA TechnaCurv Pickers Harness has all the same features as the TechnaCurv Harness Curvilinear torso webbing and lightweight shoulder and sub-pelvic straps plus an 18" integral dorsal D-extension with Velcro closure provides easy access to the back D-ring. North Heavy-Duty Harness features an extended back D-Ring and integrated lanyard that is adjustable from 4' 6'. This model is constructed of 2" polyester webbing. North Rite-On Harness is designed to hold its shape and provide all-day comfort. The harness is constructed with a comfortable shoulder pad to make donning a breeze and eliminate the tangling of straps. Quick connectors allow you to connect in a single action. Unit features D-ring on the back with 18" extender. MSA TechnaCurv Picker s Harness North Heavy-Duty Harness North Rite-On Harness Chest Buckle Leg Buckle D-Rings Padding Capacity Size MSA TechnaCurv Picker s Harness Mating Tongue Back, Side Shoulder 400 lbs. Universal $ North Heavy-Duty Harness Mating Tongue Back, Side Shoulder 440 lbs. Universal Rite-On Harness Quick Connect Quick Connect Back Shoulder 310 lbs. Universal Lanyard Extender This 18" lanyard extension makes attaching a lanyard to a back D-Ring on a harness much easier. Unit has a snaphook at one end and a D-Ring on the other end $

6 Fall Protection Harnesses Construction Harnesses Construction Harnesses are specifically designed to meet the challenges found on construction sites. Typical additional features may include a belt and/or padding in the back, shoulders and waist. All styles meet applicable OSHA and ANSI standards. Miller Revolution Construction Harness features an integrated back and shoulder pads to provide all-day comfort and a stand-up D-ring with fall indicator for greater worker safety. The integrated accessory system provides a PivotLink connection for belts, tools and accessories. The torso cam buckle allows for one-handed release and simultaneous adjustment of the shoulder straps. Type 10 webbing is twice as strong as standards require to provide longer service life. Miller Heavy-Duty Harness holds up during the most demanding jobs, including confined space activities. Harness features a heavy-duty nylon webbing and tongue-buckle straps throughout. Miller DuraFlex Four D-Ring Harness conforms to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking. DBI-Sala Exofit Construction Harness provides the ultimate in no-tangle donning and security. Simply put the ExoFit on, adjust the straps and the harness remembers the adjustment. The cushioned shoulder pads are built-in, so they won t slip or slide and the cushioned leg, hip and seat straps provide additional security during a fall. Breathable Dri-lex lining draws moisture away to keep you dry and comfortable. DBI-Sala Construction Vest Style Harness is constructed using Delta No-Tangle design to provide added comfort, increased productivity and improved safety for everyone. Friction buckles on the lower shoulder straps and tongue buckle leg straps make this harness easy to don. Sewn-in back and shoulder pads produce added comfort. DBI-Sala Full Body Crossover Style Harness is manufactured from high-strength, durable polyester webbing. Front and side D-rings make ladder climbing or positioning easy. Back D-ring for fall protection. Color-coded straps and metal-to-metal mating-type leg buckles make donning easy. Unit weighs only 3.2 lbs. MSA TechnaCurv Construction Harness features a Curvilinear torso webbing that curves around the neck area to help prevent chafing and discomfort. Adjustable Y-back D-locator pad lets you adjust the back D-ring to provide proper harness fit. Shoulder and sub-pelvic straps feature Sorbtek fabric, a lightweight material designed to wick moisture away from the body. Model without belt does have belt loops, giving you the flexibility to add any belt of your choice. Model with belt includes a back pad for superior comfort. MSA Workman Construction Harness is comfortable fall protection that s easy to use. The integral back pad comes with a removable tongue buckle tool belt. Choose from models with or without shoulder pads. Guardian Seraph Construction Harness with Belt features stretchability in the shoulders and back, quick-adjust torso buckles, tongue buckle leg straps, shoulder pads and a sub-pelvic strap. This model features six points of adjustment, D-ring lanyard keepers that double as retrieval hoists, a padded waist belt and side D-rings. Chest Buckle Leg Buckle D-Rings Padding Capacity Size Miller Revolution Construction Harness Mating Mating Back Back, Shoulder 400 lbs. Universal $ Revolution Construction Harness Mating Tongue Back Back, Shoulder 400 lbs. Universal Revolution Construction Harness with Belt Mating Mating Back, Side Back, Shoulder, Waist 400 lbs. Universal Revolution Construction Harness with Belt Mating Tongue Back, Side Back, Shoulder, Waist 400 lbs. Universal Heavy-Duty Harness Tongue Back 400 lbs. Small, 32" 36" Waist Heavy-Duty Harness Tongue Back 400 lbs. Medium, 36" 44" Waist Heavy-Duty Harness Tongue Back 400 lbs. Large, 42" 46" Waist Heavy-Duty Harness Tongue Back 400 lbs. X-Large, 44" 52" Waist DuraFlex Four D-Ring Harness Mating Back, Side, Chest 400 lbs. Universal DBI-Sala Exofit Construction Harness Quick Connect Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" 44" Waist Exofit Construction Harness Quick Connect Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" 48" Waist Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Small, 32" 40" Waist Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Medium, 36" 44" Waist Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Large, 40" 48" Waist Full Body Crossover Harness Mating Back, Side, Front 420 lbs. Universal MSA TechnaCurv Construction Harness Mating Tongue Back, Side Shoulder 400 lbs. Universal TechnaCurv Construction Harness with Belt Quick Connect Tongue Back, Side Back, Shoulder 400 lbs. Universal Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. X-Small Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. Small Large Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. X-Large Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. XX-Large Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. X-Small Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. Small Large Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. X-Large Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. XX-Large Guardian Seraph Construction Harness Mating Tongue Back, Side Shoulder, Waist 310 lbs. Medium/Large Seraph Construction Harness Mating Tongue Back, Side Shoulder, Waist 310 lbs. X-Large/XX-Large

7 Harnesses Fall Protection Miller Revolution Construction Harness with Tongue Leg Buckle Miller Revolution Construction Harness with Belt and Mating Leg Buckle Miller Heavy-Duty Harness Miller DuraFlex Four D-Ring Harness DBI-Sala Exofit Construction Harness DBI-Sala Construction Vest Style Harness DBI-Sala Full Body Crossover Harness MSA TechnaCurv Construction Harness MSA Workman Construction Harness Guardian Seraph Construction Harness 253

8 Fall Protection Harnesses Stretch Harnesses Miller Stretch Harnesses conform to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking. Because these harnesses are stretchable, the worker has greater mobility with less fatigue. All are universally sized to fit most waists from 36" 52". All styles meet applicable OSHA and ANSI standards. DuraFlex Python Harness features shoulder straps that are constructed of a cushioned, tubular webbing to reduce stress on the neck and shoulders. The lower torso straps are made of DuraFlex stretchable webbing and the leg straps are made of non-stretch webbing. This combination produces greater flexibility with fewer adjustments and allows the harness to hold its shape for easy donning. Harness also features a non-slip adjustable chest strap, sliding back D-ring and pads, a back strap and adjustable lanyard rings. DuraFlex Python Ultra Harness offers the added features of a comfort touch back pad and quick connect chest and leg buckles. DuraFlex E850 Harness features a sliding back D-ring and friction-buckle shoulder and mating-buckle leg straps. DuraFlex E851 Harness is the same as the E850, with the added features of side D-rings. DuraFlex Four D-Ring Harness feature standard chest, side and back D-rings. Miller Titan Harness provides Titanic fall protection for the most rigorous work environments. Non-slip chest strap assures a proper fit and the sub-pelvic strap provides added safety and support. The T-Flex Stretchable Harness features a stretchable webbing that moves with you to produce greater comfort and added mobility. Miller DuraFlex Python Harness Miller DuraFlex Python Ultra Harness Miller DuraFlex E850 Harness Miller DuraFlex Four D-Ring Harness Miller Titan T-Flex Harness Chest Buckle Leg Buckle D-Rings Capacity Size DuraFlex Python Mating Mating Back 400 lbs. Universal $ DuraFlex Python Mating Tongue Back 400 lbs. Universal DuraFlex Python Ultra Quick Connect Quick Connect Back 400 lbs. Universal DuraFlex Python Ultra Quick Connect Quick Connect Back Side 400 lbs. Universal DuraFlex E850 Mating Mating Back 400 lbs. Universal DuraFlex E851 Mating Mating Back, Side 400 lbs. Universal DuraFlex Four D-Ring Harness Mating Back, Side, Chest 400 lbs. Universal Titan T-Flex Harness Mating Tongue Back, Side 310 lbs. Universal Titan T-Flex Harness Mating Mating Back 310 lbs. Universal Buckle Styles Mating Buckles are the most common buckle style used by workers who do not share their harness Tongue Buckles are similar to a standard belt buckle. This type of buckle is ideal for those who share their harness. Material is generally a little thicker and stiffer in the tongue buckle area. Friction Buckles or Parachutes Buckle are easy to adjust between various workers. Simply step into the leg holes and pull the straps tight. Quick Connect Buckles cannot accidentally disengage while the harness is worn. Most workers find this specialty buckle easy to attach/detach. 254 Mating Buckle Tongue Buckle Friction Buckle Quick Connect Buckle

9 Pack Style Shock-Absorbing Lanyards Harnesses Fall Protection Pack Style Lanyards feature a shock absorber pack that utilizes a controlled tearing action when subjected to fall arrest forces. All meet applicable OSHA and ANSI standards. Miller SofStop Shock-Absorbing Lanyards greatly reduce fall arrest forces. The inner core extends up to a maximum of to allow a soft, stable stop. Miller Titan Shock-Absorbing Lanyard is constructed of a durable polyester webbing that expands up to 3 1 2' to reduce fall arrest forces. Lanyard includes a shock absorber pack as an integral part of the standard lanyard and a back-up safety strap that deploys for added fall protection. DBI-Sala EZ Stop Shock-Absorbing Lanyards are specifically designed to reduce fall arrest forces placed on a worker in a fall. Vinyl-Coated Steel Cable Lanyard is ideal for harsh environments and is the ultimate durability and longevity. Lanyard limits arrest forces to 900 lbs. or less. Lanyard limits arrest forces to 900 lbs. or less. North Shock-Absorbing Lanyard is manufactured from 1 3 4" poly webbing with double-locking snaps. Guardian Monster Edge Heavy-Duty Shock Absorbing Lanyard offers a reinforced webbing for added protection from fraying when running along a beam edge. This specially woven webbing has a tensile strength of over 10,000 pounds. Double-wide shock pack keeps impact forces below industry standards. MSA Workman Shock-Absorbing Lanyard is lightweight with a low-profile body. The shock absorber includes a clear protective cover over the labels to increase service life and allow for easy inspection. Tear-tape design keeps fall arrest forces below 900 lbs. Miller SofStop, Miller SofStop, DBI-Sala EZ Stop, DBI-Sala EZ Stop, DBI-Sala EZ Stop, DBI-Sala EZ Stop, Miller Titan, Guardian Monster Edge, MSA Workman, Body Connection Base Connection Capacity Length Miller SofStop Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Adjustable from 4' 6' 400 lbs. $ SofStop Shock-Absorbing Lanyard 1 Snap Hook 1 D-Ring 18" 400 lbs Titan Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs DBI-Sala EZ Stop Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs EZ Stop Shock-Absorbing Lanyard 1 Snap Hook 1 Carabiner 6' 310 lbs EZ Stop II Shock-Absorbing Lanyard 1 Snap Hook 1 D-Ring " 310 lbs EZ Stop II Vinyl-Coated Steel Cable Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs North Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 4' 310 lbs Guardian Monster Edge Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 5' 400 lbs MSA Workman Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Adjustable from 4' 6' 310 lbs

10 Fall Protection Harnesses Tubular Shock-Absorbing Lanyards Tubular Lanyards feature an internal core that expands to reduce fall arrest forces. All meet applicable OSHA and ANSI standards. Miller Manyard Shock-Absorbing Lanyards reduce fall arrest forces by 50-80%. Manyard s inner core extends to slow a worker s descent. Pop-out warning flag indicates the lanyard should be removed from service. Miller Titan Shock-Absorbing Lanyard is constructed of a durable polyester webbing that expands up to 3 1 2' to reduce fall arrest forces. Lanyard features a built-in inner woven core and an outer jacket that serves as a back-up web lanyard. DBI-Sala EZ Stop Shock-Absorbing Lanyards are specifically designed to reduce fall arrest forces placed on a worker in a fall. Web loop lanyard design allows reduced lanyard weight and reduces electrical conductivity. Lanyard limits fall arrest forces to 900 lbs. or less. North Shock-Absorbing Lanyard features double-locking snap-hook connectors on both ends. Miller Manyard, Miller Manyard, Miller Titan, DBI-Sala EZ Stop Nylon Web, DBI-Sala EZ Stop, Body Connection Base Connection Length Capacity Miller Manyard Shock-Absorbing Lanyard 1 Snap Hook 1 Rebar Hook 6' 310 lbs. $ Manyard Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs Titan Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs DBI-Sala EZ Stop Nylon Web Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 6' 310 lbs EZ Stop Shock-Absorbing Lanyard 1 Web Loop 1 Snap Hook 6' 310 lbs North Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook 4' 310 lbs EZ Stop Retrax Shock-Absorbing Lanyard The EZ Stop Retrax adjusts automatically to fit the working area. Unit retracts and expands smoothly and consistently from 2 1 2' 6'. The retraction keeps the lanyard taut and close to the body at all times, reducing trip fall hazards, snagging on equipment and dragging. Unit consists of a two snap hooks, shock type pack, tough polyester webbing and a polycarbonate thermoplastic retractor case. When subjected to fall arrest forces, a unique tearing action limits the maximum arresting force to 900 lbs. Meets applicable OSHA and ANSI standards $ same day SHIPMENT The products you need ship today. 256

11 Stretchable Shock-Absorbing Lanyards Lanyards Fall Protection Tired of tripping over and snagging traditional lanyards? These lanyards can be stretched and adjusted so they stay taut and close to the body at all times, reducing trip fall hazards, snagging on equipment and dragging. Adjusting your lanyard to as short a length as possible will limit fall-arresting forces. All meet applicable OSHA and ANSI standards. Miller Manyard II Shock-Absorbing Lanyards use a stretchable design for extra comfort and safety. This 6' lanyard contracts to a length of 4' which reduces the chance of tripping, snagging or dragging. Shock-absorbing design reduces fall arrest forces by 50-80%. Inner lanyard core features a bright red color making it visible if damaged. Miller SofStop Shock-Absorbing Lanyard greatly reduces fall arrest forces. The inner core extends up to a maximum of 3 1 2' to allow a soft, stable stop. DBI-Sala Shockwave Shock-Absorbing Lanyards feature an internal elastic band that automatically extends to 6' and contracts down to approximately 4 1 2'. Web Loop Lanyard features a sewn web loop D-ring for reduced weight and reduced electrical conductivity. DBI-Sala EZ Stop Retrax Shock-Absorbing Lanyard adjusts automatically to fit the working area. Unit retracts and expands smoothly and consistently from 2 1 2' 6'. The retraction keeps the lanyard taut and close to the body at all times, reducing trip fall hazards, snagging on equipment and dragging. Unit consists of a two snap hooks, shock type pack, tough polyester webbing and a polycarbonate thermoplastic retractor case. When subjected to fall arrest forces, a unique tearing action limits the maximum arresting force to 900 lbs. MSA Diamond Shock-Absorbing Lanyard offers a full 6' range of motion when in use and contracts to 4 1 2' when not in use to reduce trip and snag hazards. A pouchless design makes this lanyard lighter and more comfortable to wear. Durable polyester construction produces abrasion and UV resistance. Unit keeps fall arrest forces below 900 lbs. MSA Expanyard Shock-Absorbing Lanyard stays closer to the user s body, reducing the possibility of trips and snags. MSA Workman Shock-Absorbing Lanyard is lightweight with a low-profile body. The shock absorber includes a clear protective cover over the labels to increase service life and allow for easy inspection. Tear-tape design keeps fall arrest forces below 900 lbs. MSA Diamond Shock-Absorbing Lanyard Miller Manyard II Shock-Absorbing Lanyards DBI-Sala Shockwave Lanyards MSA Expanyard Shock-Absorbing Lanyard Miller SofStop Shock-Absorbing Lanyard DBI-Sala EZ Stop Retrax Shock-Absorbing Lanyard MSA Workman Shock-Absorbing Lanyard Shock Absorber Capacity Body Connection Base Connection Length Miller Manyard II Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Tubular Stretchable from 4' 6' 310 lbs. $ Manyard II Shock-Absorbing Lanyard 1 Snap Hook 1 Rebar Hook Tubular Stretchable from 4' 6' 310 lbs SofStop Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Pack Adjustable from 4' 6' 310 lbs DBI-Sala Shockwave Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Tubular Stretchable from 4 1 2' 6' 310 lbs Shockwave Shock-Absorbing Lanyard 1 Snap Hook 1 Rebar Hook Tubular Stretchable from 4 1 2' 6' 310 lbs Shockwave Shock-Absorbing Lanyard 1 Web Loop 1 Snap Hook Tubular Stretchable from 4 1 2' 6' 310 lbs EZ Stop Retrax Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Pack Adjustable from 2 1 2' 6' 310 lbs MSA Diamond Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Tubular Stretchable from 4 1 2' 6' 310 lbs Expanyard Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Pack Stretchable from 4 1 2' 6' 310 lbs Workman Shock-Absorbing Lanyard 1 Snap Hook 1 Snap Hook Pack Adjustable from 4' 6' 310 lbs

12 Fall Protection Lanyards Double-Leg/100% Tie-Off Shock-Absorbing Lanyards Double-Legged Lanyards are used to provide 100% tie-off. These lanyards allow you to stay protected and connected as you move from one location to another. All meet applicable OSHA and ANSI standards. Miller BackBiter Tie-Back Lanyard has a 5K snap hook that provides 5,000 lb. capacity at every angle. Cordura nylon webbing provides five times more abrasion resistance, so it can be tied off on rough surfaces. Miller SofStop Shock-Absorbing Lanyards greatly reduce fall arrest forces. The inner core extends up to a maximum of 3 1 2' to allow a soft, stable stop. Miller Manyard Shock-Absorbing Lanyards reduce fall arrest forces by 50-80%. Manyard s inner core extends to slow descent. Pop-out warning flag indicates the lanyard should be removed from service. Miller Titan Shock-Absorbing Lanyard is constructed of a durable polyester webbing that expands up to 3 1 2' to reduce fall arrest forces. Lanyard features a built-in inner woven core and an outer jacket that serves as a back-up web lanyard. DBI-Sala Shockwave Shock-Absorbing Lanyards feature an internal elastic band that automatically extends to 6 and contracts down to approximately Web Loop Lanyard features a sewn web loop D-ring for reduced weight and reduced electrical conductivity. MSA Diamond Shock-Absorbing Lanyard offers a full 6' range of motion when in use and contracts to 4 1 2' when not in use to reduce trip and snag hazards. A pouchless design makes this lanyard lighter and more comfortable to wear. MSA Expanyard Shock-Absorbing Lanyard stays closer to the user s body, reducing the possibility of trips and snags. MSA Workman Shock-Absorbing Lanyards are lightweight with a low-profile body. The shock absorber includes a clear protective cover over the labels to allow for easy inspection. Guardian Monster Edge Heavy-Duty Shock Absorbing Lanyards offer a reinforced webbing for added protection from fraying when running along a beam edge. This specially woven webbing has a tensile strength of over 10,000 pounds. Double-wide shock pack keeps impact forces below industry standards. Double Lock Wrap Lanyard has the ability to adjust in length, providing versatility and efficiency. The carabiner reduces the possibility of roll out. Miller SofStop, Miller Manyard, Miller Titan, DBI-Sala Shockwave, MSA Diamond, MSA Expanyard, MSA Workman, MSA Workman, Body Connection Shock Absorber Capacity Base Connection Length Miller BackBiter Tie-Back Shock Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Pack 6' 310 lbs. $ SofStop Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Pack 6' 310 lbs SofStop Shock-Absorbing Lanyard 1 Snap Hook 2 Rebar Hooks Pack 6' 310 lbs Manyard Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Tubular 6' 310 lbs Manyard Shock-Absorbing Lanyard 1 Snap Hook 2 Rebar Hooks Tubular 6' 310 lbs Titan Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Tubular 6' 310 lbs DBI-Sala Shockwave Shock-Absorbing Lanyard 1 Snap Hook 2 Rebar Hooks Tubular Stretchable from 4 1 2' 6' 310 lbs Shockwave Shock-Absorbing Lanyard 1 Web Loop 2 Snap Hooks Tubular Stretchable from 4 1 2' 6' 310 lbs MSA Diamond Shock-Absorbing Lanyard 1 Snap Hook 2 Rebar Hooks Tubular Stretchable from 4 1 2' 6' 310 lbs Expanyard Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Pack Stretchable from 4 1 2' 6' 310 lbs Workman Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Pack Adjustable from 4' 6' 310 lbs Workman Shock-Absorbing Lanyard 1 Snap Hook 2 Rebar Hooks Pack Adjustable from 4' 6' 310 lbs Workman Tie-Back Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks & 2 D-Rings Pack Adjustable from 4' 6' 310 lbs Guardian Shock-Absorbing Lanyard 1 Snap Hook 2 Snap Hooks Pack 5' 400 lbs Double Lock Wrap Shock-Absorbing Lanyard 1 Snap Hook 2 Carabiners Pack 6' 400 lbs

13 Tie-Back Shock-Absorbing Lanyards Lanyards Fall Protection Don t tie back with regular lanyards, choose a lanyard designed exclusively for tie-back use. All meet applicable OSHA and ANSI standards. Miller BackBiter Tie-Back Lanyards have a 5K snap hook that provides 5,000 lb. capacity at every angle. Cordura nylon webbing provides five times more abrasion resistance, so it can be tied off on rough surfaces. SofStop shock absorber reduces fall arresting forces. DBI-Sala EZ Stop Tie-Back Lanyard connects back to itself around an anchor point. Unit features 1" polyester webbing, 2 snap hooks and an adjustable D-ring in the middle. Guardian Monster Edge Shock Absorbing Lanyards offer a reinforced webbing for added protection from fraying when running along a beam edge. This specially woven webbing has a tensile strength of over 10,000 pounds. Double-wide shock pack keeps impact forces below industry standards. Double Lock Wrap Shock-Absorbing Lanyard has the ability to adjust in length, providing versatility and efficiency. The carabiner reduces the possibility of roll out. MSA Workman Tie-Back Lanyards are lightweight with a low-profile body. The shock absorber includes a clear protective cover over the labels to increase service life and allow for easy inspection. Tear-tape design keeps fall arrest forces below 900 lbs. Lanyards can be adjusted from 4' 6'. Miller BackBiter Tie-Back Lanyard DBI-Sala EZ Stop Tie-Back Lanyard MSA Workman Tie-Back Lanyard MSA Workman 2-Legged Tie-Back Lanyard Body Connection Shock Absorber Capacity Base Connection Length Miller BackBiter Single Leg Tie-Back Lanyard 1 Snap Hook 1 Snap Hook Pack 6' 310 lbs. $ BackBiter 2-Legged Tie-Back Lanyard 1 Snap Hook 2 Snap Hooks Pack 6' 310 lbs DBI-Sala EZ Stop Tie-Back Lanyard 1 Snap Hook 1 Snap Hook & 1 D-Ring Pack 6' 310 lbs Guardian Double Lock Wrap Shock-Absorbing Lanyard 1 Snap Hook 1 Carabiner Pack 6' 400 lbs Double Lock Wrap Shock-Absorbing Lanyard 1 Snap Hook 2 Carabiners Pack 6' 400 lbs MSA Workman Tie-Back Lanyard 1 Snap Hook 1 Snap Hook & 1 D-Ring Pack Adjustable from 4' 6' 310 lbs Workman 2-Legged Tie-Back Lanyard 1 Snap Hook 2 Snap Hooks & 2 D-Rings Pack Adjustable from 4' 6' 310 lbs A B C D E F Rope and Webbing Lanyards Rope Lanyards are manufactured from durable spun nylon rope to assure quality and strength. Webbing Lanyards feature nylon webbing for maximum durability. Adjustable Lanyards allow workers to set the lanyard length from 3.6' 4' based on the work environment. All have a weight capacity of 310 lbs. Meets applicable OSHA and ANSI standards. A Miller Rope Lanyard, 6'L X 1 2" Diameter $ B Miller Rope Lanyard, 6'L X 5 8" Diameter with Rebar Hook C MSA Webbing Lanyard, 3'L D Miller Webbing Lanyard, 6'L X 7 8" Wide E Miller Adjustable Rope Lanyard, 9 16" Diameter F Miller Adjustable Webbing Lanyard, 1" Wide

14 Fall Protection Self-Retracting Lifelines Economy/Disposable Self-Retracting Lifelines Self-Retracting Lifelines feed out either cable or webbing, then retract automatically as the worker gets closer to the device. These units prevent excessive free fall distances and decrease the chances of injury during a fall. These economy models are considered disposable and should be immediately discarded if they are involved in a fall. All styles require no annual factory certification and meet applicable OSHA and ANSI standards. Miller Retractable Webbing Lanyard provides security and full range of movement because it s designed to automatically lock-up when a fall is sensed. Swivel shackle includes a carabiner for attachment to an anchor point, while 3 4" locking snap attaches to a full body harness. Miller Scorpion Fall Limiters require less clearance, offers greater mobility and prevents tripping hazards when compared to other shock-absorbing lanyards. The quick-activating stainlesssteel breaking system arrests free falls within inches. 9' working length improves mobility. Miller Titan Fall Limiters reduce free falls to inches with their quick-activating stainless-steel breaking system. The working length of the limiter is 11', so you get an additional 5' of mobility over a traditional 6' shock-absorbing lanyard. Unit features a thermoplastic housing and 1 polyester webbing. DBI-Sala Rebel Self-Retracting Lifeline is the first economy 11' self-retracting lifeline on the market that doesn t compromise performance or safety. Unit delivers the best lifeline length-to-weight ratio in the industry. The rugged aluminum housing and stainless steel working components can withstand rough use, yet weigh only 2.8 lbs. MSA Short-Stop Self-Retracting Lanyard is a fast-acting fall arrester that provides all the mobility you need. Lanyard is ideal for climbing applications where vertical mobility is required. Unit offers a carabiner connector on the top end and an aluminum self-locking snap hook to secure the harness. 10' lanyard features strong, durable 1 3 4" wide nylon webbing. Lanyard will minimize fall arrest forces to 1,800 lbs. MSA Workman Fall Limiters offer a solid design and fast-acting brake mechanism. A durable, engineered thermoplastic housing increases service life and rugged, impact-absorbing protective bumpers provide added durability. An integral load indicator lets you know when it is time to remove the product from service. Guardian Self-Retracting Lifeline features a durable aluminum housing and a quick-action braking system. The 1" nylon webbing has a working length of 11'. Miller Retractable Webbing Lanyard Miller Scorpion Fall Limiter Miller Titan Fall Limiter DBI-Sala Rebel Self-Retracting Lifeline MSA Short-Stop Self-Retracting Lanyard MSA Workman Fall Limiter Guardian Self- Retracting Lifeline Body/Lanyard Connection Working Length Capacity Lifeline Material Base Connection Miller Retractable Webbing Lanyard Polyester Webbing Swivel Shackle & Carabiner Snap Hook 10' 310 lbs. $ Scorpion Fall Limiter Polyester Webbing Swivel Shackle & Carabiner Rebar Swivel Hook 9' 310 lbs Scorpion Fall Limiter Polyester Webbing Swivel Shackle Snap Hook 9' 310 lbs Scorpion Fall Limiter Polyester Webbing Twist-Lock Carabiner Swivel Snap Hook 9' 310 lbs Scorpion Fall Limiter Polyester Webbing Twist-Lock Carabiner Snap Hook 9' 310 lbs Scorpion Fall Limiter Polyester Webbing Snap Hook 9' 310 lbs Titan Fall Limiter Polyester Webbing Swivel Shackle Rebar Hook 11' 310 lbs Titan Fall Limiter Polyester Webbing Swivel Shackle & Carabiner Snap Hook 11' 310 lbs Titan Fall Limiter Polyester Webbing Swivel Shackle Snap Hook 11' 310 lbs Titan Fall Limiter Polyester Webbing Twist-Lock Carabiner Snap Hook 11' 310 lbs Titan Fall Limiter Polyester Webbing Snap Hook 11' 310 lbs DBI-Sala Rebel Self-Retracting Lifeline Nylon Webbing Swivel Shackle Swivel Snap Hook 11' 310 lbs MSA Short-Stop Self-Retracting Lanyard Nylon Webbing Snap Hook 10' 310 lbs Workman Fall Limiter Nylon Webbing LI Snap Hook 12' 400 lbs Workman Fall Limiter Nylon Webbing Swivel Shackle & Carabiner LC Snap Hook 12' 400 lbs Workman Fall Limiter Nylon Webbing Swivel Shackle & Carabiner 36C Snap Hook 12' 400 lbs Guardian Self-Retracting Lifeline Nylon Webbing Twist-Lock Carabiner Swivel Snap Hook 11' 310 lbs

15 Professional Series/Repairable Self-Retracting Lifelines Self-Retracting Lifelines Fall Protection Self-Retracting Lifelines feed out either cable or webbing, then retract automatically as the worker gets closer to the device. These units prevent excessive free fall distances and decrease the chances of injury during a fall. These models are considered repairable and can be sent back to the manufacturer for re-certification if they are involved in a fall. All styles (excluding Guardian model) require no annual factory certification and meet applicable OSHA and ANSI standards. Miller Falcon Self-Retracting Lifelines are constructed of an impact-resistant nylon housing and corrosion-resistant stainless steel and aluminum components. Dual swivels prevent the lifeline from twisting during use. Improved load indicator on the snap hook identifies when the unit needs to be removed from service. Miller MightyLite Self-Retracting Lifelines offer a centrifugal braking mechanism that limits free-fall to less than 24". Lifeline automatically pays out and retracts as you move. Unit features an anodized aluminum case and a stainless-steel back plate. Miller Black Rhino Self-Retracting Lifeline is small and light, yet designed to endure the daily rigors of harsh environments. Quick-activating, high-strength stainless steel breaking system arrests falls within inches. Internal shock absorber reduces fall arrest forces to under 900 lbs. The locking swivel snap hook accepts a variety of anchorage connectors. MSA Dyna-Lock Self-Retracting Lanyards limit free-fall distance, deceleration distance and fall arrest forces while allowing freedom-of-movement and vertical mobility. Unit has a 4 1 2' per second locking speed and a shock absorber to limit fall arrest forces to under 900 lbs. MSA Aptura Self-Retracting Lanyard offers a state-of-the-art design, fast-acting break mechanism and swivel on the housing. An integral load indicator lets you know when it s time to remove the unit from service. Guardian Self-Retracting Lifelines feature a durable aluminum housing and a quick-action braking system. Units feature stainless steel and non-corrosive components for extended life and require recertification every two years. * When using a SofStop Shock-Absorbing Lanyard, weight capacity increases to 400 lbs. Miller Falcon Self-Retracting Lifeline Miller MightyLite Self-Retracting Lifeline Miller Black Rhino Self-Retracting Lifeline MSA Dyna-Lock Self-Retracting Lanyard MSA Aptura Self-Retracting Lanyard Guardian Self-Retracting Lifeline Working Length Capacity Lifeline Material Base Connection Body Connection Miller Falcon Self-Retracting Lifeline Galvanized Steel Wire Rope Swivel Shackle & Carabiner Swivel Snap Hook 65' 310 lbs.* $1, Falcon Self-Retracting Lifeline Galvanized Steel Wire Rope Swivel Shackle & Carabiner Swivel Snap Hook 50' 310 lbs.* 1, Falcon Self-Retracting Lifeline Galvanized Steel Wire Rope Swivel Shackle & Carabiner Swivel Snap Hook 30' 310 lbs.* Falcon Self-Retracting Lifeline Galvanized Steel Wire Rope Swivel Shackle & Carabiner Swivel Snap Hook 20' 310 lbs.* MightyLite Self-Retracting Lifeline Galvanized Steel Wire Rope Twist-Lock Carabiner Snap Hook 20' 310 lbs.* MightyLite Self-Retracting Lifeline Polyester Webbing Twist-Lock Carabiner Snap Hook 20' 310 lbs.* Black Rhino Self-Retracting Lifeline Stainless Steel Wire Rope Swivel Shackle Swivel Snap Hook 9' 310 lbs.* MSA Dyna-Lock Self-Retracting Lanyard Galvanized Steel Wire Rope Swivel Snap Hook 70' 400 lbs. 1, Dyna-Lock Self-Retracting Lanyard Galvanized Steel Wire Rope Swivel Snap Hook 50' 400 lbs Dyna-Lock Self-Retracting Lanyard Galvanized Steel Wire Rope Swivel Snap Hook 30' 400 lbs Dyna-Lock Self-Retracting Lanyard Stainless Steel Wire Rope Swivel Snap Hook 20' 310 lbs Aprtura Self-Retracting Lanyard Nylon Webbing Swivel Shackle & Carabiner LS Snap Hook 30' 400 lbs Guardian Self-Retracting Lifeline Nylon Webbing Swivel Shackle & Carabiner Swivel Snap Hook 20' 310 lbs Self-Retracting Lifeline Galvanized Steel Wire Rope Swivel Shackle & Carabiner Swivel Snap Hook 20' 310 lbs

16 Fall Protection Ropes/Ladders A Rope Grabs and Ropes Stainless steel Rope Grabs lock in the event of a fall and move easily up and down vertical lifelines to provide continuous fall protection. Trailing Model provides hands-free operation. Polyester/ polypropylene Ropes have a locking snap hook and loop. Ropes measure 5 8" in diameter and have a tensile strength of 9,300 lbs. 3' SofStop Lanyard greatly reduces fall arrest forces. Meets applicable OSHA, ANSI and CSA standards. A Manual Rope Grab.. $ Trailing Rope Grab B ' Rope ' Rope C ' SofStop Lanyard A Reusable Anchor Roofers Kits Choose Kits with Snappy Anchors or Reusable Temper Anchor These complete fall protection systems come in a bucket for easy transport and storage. All kits come with a Universal Harness and a Vertical Lifeline Assembly with shock pack, and positioning device with 18 lanyard extension to keep device within reach. 310 lb. rated. Meets applicable OSHA and ANSI standards. C B A Kit with 5 Snappy Disposable Anchors and 25' Lifeline Kit with 5 Snappy Disposable Anchors and 50' Lifeline Kit with Temper Reusable Anchor and 25' Lifeline Kit with Temper Reusable Anchor and 50' Lifeline.... $ Safe-T Ladder System This patented product allows for safe and easy access to rooftops. System easily attaches to most standard extension ladders with a safety latch, and it can be hand tightened without tools. Unit extends 36 above eave height to comply with OSHA regulations. System is made of high-strength aluminum with grips on the handrails to prevent slipping in wet conditions $ Lad-Saf Ladder Safety Systems This system provides complete safety and security when climbing fixed ladders on poles, towers, tanks, etc. The shockabsorbing top bracket and tension-indicating bottom bracket serve as the anchors for the steel cable which runs the length of the climbing area. Safety Sleeve prevents falls by locking onto the cable. When purchasing the Safety Sleeve sleeve only, it must be used with 3 8 or 8mm diameter cable. It is easily attached or removed anywhere along the cable and automatically follows as you climb or descend. System comes complete with galvanized mounting brackets, non-metallic cable guides, 3 8" diameter galvanized cable, safety sleeve and universal cross over harness. Meets applicable OSHA and ANSI standards. This product will ship separately, direct from the manufacturer ' Lad-Saf System $1, ' Lad-Saf System , Cable Sleeve with Carabiner Cable Sleeve without Carabiner

17 Lifelines/Anchors Fall Protection Rebar Positioning Lanyard Use to position and tie-off to rebar assemblies. Lanyard allows workers to lean away from walls, while keeping their hands free. Unit incorporates one rebar snap hook and two locking snap hooks attached to a heavy-duty steel chain. Meets applicable OSHA and ANSI standards $ Beam Clamps Steel Beam Clamps securely attach to I, S or W-beams. Swivel attachment ring prevents twisting of attaching devices. Available in 9" or " maximum beam width. Meets applicable OSHA and ANSI standards. This product will ship separately, direct from the manufacturer " $ " Temporary Horizontal Lifeline For Two Workers Designed for easy installation and removal, this temporary horizontal lifeline system can be used for many applications. System can be rigged using a wide variety of anchorage connectors, increasing versatility, while reducing the need for special or engineered equipment. The shock absorber on this two-worker system clearly indicates that the system has seen fall arrest forces and should be removed from use. Kit includes a 60' polyester lifeline, line tensioner, 2 carabiner attachments, 2 anchorage connector straps, 2 connecting o-rings and a carrying bucket. Can be used with any suitable 5,000 lb. rated anchorage. Meets applicable OSHA and ANSI standards $ Lanyard Extender This 18" lanyard extension makes attaching a lanyard to a back D-Ring on a harness much easier. Unit has a snap hook at one end and a D-Ring on the other end $ Suspension Trauma Safety Step The Safety Step is designed to help workers in a postfall suspension position avoid the effects of suspension trauma. This unit allows workers to relieve pressure by inserting a foot into one of the step loops and then standing up in the harness. Workers can use a single Safety Step or two Safety Steps (one for each leg) to provide additional support, balance, and comfort. This lightweight, versatile strap attaches (with or without a carabiner) to any harness and accommodates all heights and sizes. Meets applicable OSHA and ANSI standards Safety Step with Carabiner... $ Safety Step without Carabiner Fall Protection Bag Safely store tools, equipment and personal items in this versatile polyester bag. Features include a flap to protect contents from dusty environments, grommeted drain hole, a drawstring opening and a carrying strap. Bag measures 10" Dia. X 14"H $ To Order: M-F, 7:00 a.m. to 7:00 p.m. CST Fax: conney.com 263

18 Lifelines/Anchors Fall Protection Rebar Positioning Lanyard Use to position and tie-off to rebar assemblies. Lanyard allows workers to lean away from walls, while keeping their hands free. Unit incorporates one rebar snap hook and two locking snap hooks attached to a heavy-duty steel chain. Meets applicable OSHA and ANSI standards $ Beam Clamps Steel Beam Clamps securely attach to I, S or W-beams. Swivel attachment ring prevents twisting of attaching devices. Available in 9" or " maximum beam width. Meets applicable OSHA and ANSI standards. This product will ship separately, direct from the manufacturer " $ " Temporary Horizontal Lifeline For Two Workers Designed for easy installation and removal, this temporary horizontal lifeline system can be used for many applications. System can be rigged using a wide variety of anchorage connectors, increasing versatility, while reducing the need for special or engineered equipment. The shock absorber on this two-worker system clearly indicates that the system has seen fall arrest forces and should be removed from use. Kit includes a 60' polyester lifeline, line tensioner, 2 carabiner attachments, 2 anchorage connector straps, 2 connecting o-rings and a carrying bucket. Can be used with any suitable 5,000 lb. rated anchorage. Meets applicable OSHA and ANSI standards $ Lanyard Extender This 18" lanyard extension makes attaching a lanyard to a back D-Ring on a harness much easier. Unit has a snap hook at one end and a D-Ring on the other end $ Suspension Trauma Safety Step The Safety Step is designed to help workers in a postfall suspension position avoid the effects of suspension trauma. This unit allows workers to relieve pressure by inserting a foot into one of the step loops and then standing up in the harness. Workers can use a single Safety Step or two Safety Steps (one for each leg) to provide additional support, balance, and comfort. This lightweight, versatile strap attaches (with or without a carabiner) to any harness and accommodates all heights and sizes. Meets applicable OSHA and ANSI standards Safety Step with Carabiner... $ Safety Step without Carabiner Fall Protection Bag Safely store tools, equipment and personal items in this versatile polyester bag. Features include a flap to protect contents from dusty environments, grommeted drain hole, a drawstring opening and a carrying strap. Bag measures 10" Dia. X 14"H $

19 Fall Protection Anchors Ratcheting End Piece B Threaded Rod Adjustment A Beamers Beamers are designed for fall arrest anchorage and also make an excellent end point for horizontal lifeline systems. Units install C to a beam structure in seconds and are easily adjustable. Vertical Beamer can be used for vertical, angled or horizontal columns. When used at foot level, a 5 Single Leg Shock- Absorbing Lanyard must be used. Meets applicable OSHA and ANSI standards. A Beamer with 14" Clamp $ Beamer with 16" Clamp B Vertical Beamer with 12" Clamp C ' Single Leg Shock-Absorbing Lanyard B C D-Bolt Anchor This D-Bolt Anchor is designed as the intermediary for securing a connecting device to an anchor point. The D-shape prevents roll out. Meets applicable OSHA and ANSI standards $ A D Concrete D-Ring Anchor Finally, a concrete anchor that will hold-up to its environment, for use in temporary or even permanent applications. Safe hook-up indicator notifies the user that the anchor has been installed properly. Anchor is an ideal connection point for shock-absorbing lanyards, self-retracting lifelines, or even horizontal lifeline systems. Unit installs into 11 16", 18mm or 3 4" holes. Meets applicable OSHA and ANSI standards $ Roof Anchors Ridge-It Anchors are designed for new construction or as a retrofit on wood rooftops. Anchors are constructed of stainless steel with zinc-plated steel D-rings for long service life. Snappy Disposable Anchor provides a safe tie-off point for temporary work where a permanent anchorage point is not necessary. When the job is complete, anchor can be bent over and the roofing material installed directly over the destroyed anchor point. Install the Truss Boss Anchor to a truss while on the ground. All styles include fasteners. Meets applicable OSHA and ANSI standards. A Ridge-It Single Anchor with 11" D-Ring $ B Ridge-It Double Anchor with 18" D-Rings C Snappy Disposable Anchor D Truss Boss Anchor A B C Concrete Anchors Establish a safe anchor point by inserting these single-user anchors into a properlysized, cured concrete hole. Anchors are reusable, so they can be removed and re-installed in a new location. Meets applicable OSHA and ANSI standards. A ,000 lb. Anchor $ B ,000 lb. Anchor C ,000 lb. Precast Hollow Core Anchor

20 Anchors/Accessories Fall Protection A A B B C Tool Lanyards Don t let tools slip away when working in high places. Single and Dual Carabiner Tool Lanyards keep tools tethered to the worker. Single style features an adjustable barrel lock that attaches to the tool on one end. The stretchable inner cord is surrounded by a rugged nylon webbing. Wrist Lanyard features a poly webbing cuff that attaches to the wrist and an adjustable barrel lock to secure the tool. A. Single Carabiner Tool Lanyard " 42" $ " 54" B. Dual Carabiner Tool Lanyard " 42" " 54" C " Wrist Tool Lanyard Small/Medium Webbing/Hook Anchor Unit is designed to assist anchoring to scaffolding, pipe or angle iron. Features a large 2 1 2" hook for easy installation and a D-ring to accommodate a connecting device. Capacity: 400 lbs. Meets applicable OSHA and ANSI standards $ Premium Cross Arm Straps Premium Cross Arm Straps are twice as durable with dualenforced 2" webbing and heavy-duty stitching. The wearpad protects the webbing against abrasion and snags. Strap features a large D-ring and a standard size D-ring for pass-through to increase the versatility of length adjustment. Meets applicable OSHA and ANSI standards. Cross Arm Strap and Carabiner Wrap Cross Arm Strap around a beam or structure to provide an anchor point. Features 2"W X 6'L nylon webbing with pass through D-rings. Locking Carabiner connects lanyards, retractable lifelines or similar devices to an anchoring point. Self-locking gate. 1" throat opening. Capacity: 400 lbs. Items meet applicable OSHA and ANSI standards. A Cross Arm Strap $45.05 B Carabiner C B Carabiners Convenient, twist-lock carabiners have an unlimited number of uses. Maximum working load is 400 lbs. and minimum tensile strength is 5,000 lbs. Meets applicable OSHA and ANSI standards Large/X-Large Steel, 1" Gate Opening $ A Steel, 2" Gate Opening ' Strap... $ B Aluminum, 1" Gate Opening ' Strap C Aluminum, 2 1 4" Gate Opening A 265

21 Fall Protection Rail System B G-Rail System Instructions Holder A C D This free-standing portable fall prevention system requires no rooftop surface attachment. Skid-resistant galvanized Base Plates prevent rust from bleeding onto the rooftop. Guard Rails are powder coated safety yellow and include a weather-protected instructions holder. Use Short Toe-Board Holder when attaching a board to the width of the base and Long Toe-Board Holder when attaching a board to the length of the base. Meets applicable OSHA and ANSI standards A Base Plate, 30" X 10", 70 lbs $ 'L X 3 1 2'H Guard Rail B 'L X 3 1 2'H Guard Rail 'L X 3 1 2'H Guard Rail C Short Toe-Board Holder D Long Toe-Board Holder Safety Guard Rail Base Use these reusable bases for jobsite construction of temporary guard rails and hand rails. Choose either a Steel or Plastic base. Meets applicable OSHA standards Steel Base $ Plastic Base A A B B Econ-O-Guard Protective Caps These caps minimize possible accidents and protect both employees and equipment. Caps are reusable, weather-resistant and brightly colored for good visibility. Caps are not intended for use as fall or penetration protection A Cap for Rebar Sizes 3 8, 100/Box... $ B Cap for Rebar Sizes 7 18, 50/Box For Rebar, Pipes and Bolts Impalement Protective Caps A self-centering formed steel insert seats these plastic caps perpendicular to the rebar. Protective Cover Adapter is a plastic insert which mates with the caps to create a saddle into which double 2 X 4 s can be secured to create a system to protect rows of inline rebar. Meets applicable OSHA standards A Cap for Rebar Sizes 3 7, 25/Box $ B Cap for Rebar Sizes 7 12, 25/Box Protective Cover Adapter, 25/Box

22 Signs Fall Protection Construction (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") Confined Space (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") Fall Protection (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") When placing your order, simply add the material abbreviation to the product code located beneath each sign ( VS = 64622VS). VS Vinyl VP Plastic VA Aluminum 7" X 10" Signs " X 14" Signs Vinyl (VS) $ Vinyl (VS) $ Plastic (VP) Plastic (VP) Aluminum (VA) Aluminum (VA) (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") (10" X 14") (7" X 10") 267