VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider"

Transcription

1 VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider System Configuration Guide November 2009 Fujitsu Limited

2 Table of Contents 1. Executive Summary Revision Level Intended Audience System Configuration Hardware Configuration Software Configuration Key Technologies Advanced Copy Function Volume Shadow Copy Service Allocation of Mailbox Database and Logs Creating New Storage Group Creating New Mailbox Database Moving Mailbox Recipients Installing ETERNUS VSS Hardware Provider Installing ETERNUS VSSHP Setting up ETERNUS VSS Hardware Provider Setting up ETERNUS VSSHP for the Backup server Setting up ETERNUS VSSHP for the Exchange server Open VSSHP Communication Port Verifying the VSSHP Installation Confirm the ETERNUS VSSHP registration Confirm the ETERNUS VSSHP Communication Service Verifying VSSHP Operations with DISKSHADOW Installing Symantec Backup Exec for Windows Servers Installing Backup Exec Installing Backup Exec Remote Agent Installing Exchange MAPI Client Exchange Backup and Restore Performing Off-Host VSS Backup Restoring from Exchange Backup Recovering Mailbox Data with GRT Recovering Mailbox Data from RSG Exchange Server CCR Environment Conclusion Summary of Configuration Tasks Appendix A: Reference Appendix B: Glossary All Rights Reserved Copyright FUJITSU LIMITED

3 1. Executive Summary This document describes a messaging environment that combines the benefits of the popular Microsoft Exchange Server 2007 and Symantec Backup Exec 12.5 software with the mission-critical advantage of a Fujitsu ETERNUS disk storage system. This document also shows how to configure the environment. Microsoft Exchange Server is the most widely used messaging software in the world. Fujitsu storage systems ETERNUS are storage systems designed to meet the requirements of a mission-critical-environment. The combination of Exchange and Fujitsu storage systems ETERNUS brings the reality of extreme high availability to this messaging environment. As a backup and recovery solution, Exchange supports Volume Shadow Copy Service (VSS) provided by Microsoft. With VSS supported backup software (a VSS requester) and storage systems, backups can be done very quickly without system interruption. Fujitsu provides a VSS Hardware Provider (VSSHP) in order to support this VSS backup solution. Setting up ETERNUS VSSHP makes it possible to use Advanced Copy Functions, (built-in ETERNUS utilities for fast disk replication) from standard backup software. We have documented a highly efficient backup solution for an Exchange Server messaging environment with Symantec Backup Exec 12.5 as a backup software and VSS backup with ETERNUS Advanced Copy Functions. This document also shows the flexible recovery of an Exchange mailbox from a VSS backup. As examples, this document describes the evaluation environment in the second chapter, the key technologies in the third chapter and the allocation of mailbox database and logs in the fourth chapter. The software installation procedures are covered in the fifth and sixth chapter. The seventh chapter describes how to perform Exchange VSS backups and restores. In addition, the eighth chapter describes the configuration of Exchange CCR (Cluster Continuous Replication) environment. The ninth chapter explains the summary of these best practices Revision Level Revision Date Description 1.0 December 2008 Initial Release 2.0 March 2009 Updated for VSSHP1.2.0 and Backup Exec November 2009 Updated for VSSHP1.3.1 and added Exchange CCR environment 1-2. Intended Audience This document is intended for IT administrators and system engineers who have an interest in implementing Microsoft Exchange 2007 and Symantec Backup Exec 12.5 using Fujitsu ETERNUS disk storage systems. It is assumed that the reader has a general knowledge of Microsoft Exchange, Active Directory, Microsoft Cluster Service, and ETERNUS features and terminologies. All Rights Reserved Copyright FUJITSU LIMITED

4 2. System Configuration The evaluation environment was set up as follows: The Active Directory Domain Controller is 64bit version Windows Server The Exchange and Backup Exec servers are 64bit version Windows Server Using the LUN mapping function on the ETERNUS disk storage system, dedicated LUNs are allocated to the Exchange server and Backup Exec server. The Backup Exec job is using the ETERNUS Advanced Copy Functions via VSSHP. Backup Exec obtains backup data from the target disks, and stores the data to the tape device or the disk folder for backup. The servers are defined as follows: Exchange server: The server where Microsoft Exchange is installed. The Backup Exec Remote Agent is also installed on this server. Backup server: The server where Backup Exec Media Server is installed. In this evaluation environment, this server also has the Exchange roles of Hub Transport and Client Access Server. Download following applications in the Internet connected environment before you start to configure. ETERNUS VSS Hardware Provider You can get the VSSHP Package (setup.exe) and the Software Information (readme_en.pdf). Microsoft Exchange Server MAPI Client and Collaboration Data Object E&displaylang=en It is assumed that the Active Directory Domain Services and Exchange Server (HUB/CAS/MB) installations are already completed in this evaluation environment. All Rights Reserved Copyright FUJITSU LIMITED

5 2-1. Hardware Configuration Server Configuration Exchange server, Backup server, and Domain Controller model: Fujitsu PRIMERGY RX300S2 type: 2 x Intel Xeon 3GHz 4096MB RAM OS: Microsoft Windows Server 2008 Enterprise Edition (x64) HBA Configuration PG-FC107 (Emulex LP1050) 2 (Exchange server and Backup server) 2 FC 2Gbps ports Storage System Configuration model: Fujitsu ETERNUS2000 model 100 firmware: V10L type: 2GB Cache, 4 x FC port RAID configuration: RAID1+0 (4+4, 146GB/15krpm) 2-2. Software Configuration Exchange Server Backup Server Windows Server Configuration Microsoft Windows Server 2008 Enterprise Edition (x64), Service Pack 2 Roles: File Service Web Server (IIS) Features: Remote Server Administration Tools Active Directory Domain Service Tools Windows PowerShell Exchange Server 2007 Configuration Microsoft Exchange Server 2007 version , Service Pack 1 Rollup 6 for Exchange Server 2007 Service Pack 1 (KB959241) Roles: Information Store Management Tools Backup Client Configuration Symantec Backup Exec 12.5 Remote Agent for Windows Microsoft Exchange Server MAPI client and Collaboration Data Object VSS Provider Configuration Provider name: ETERNUS VSS Hardware Provider Provider type: Hardware Provider ID: 38A7D4B1-9B95-45ab-82E1-EDFC591307EF Version: Multipath Driver Configuration ETERNUS Multipath Driver V2.0L14 Windows Server Configuration Microsoft Windows Server 2008 Enterprise Edition (x64), Service Pack 2 Roles: File Service Web Server (IIS) All Rights Reserved Copyright FUJITSU LIMITED

6 Features: Remote Server Administration Tools Active Directory Domain Service Tools Windows PowerShell Exchange Server 2007 Configuration Microsoft Exchange Server 2007 version , Service Pack 1 Rollup 6 for Exchange Server 2007 Service Pack 1 (KB959241) Roles: Hub Transport Client Access Management Tools Backup Exec Configuration Symantec Backup Exec 12.5 for Windows Servers Version 12.5 Rev.2213 Service Pack 2, Hotfix The following Backup Exec options must be installed: Advanced Disk-Based Backup Agent for Microsoft Exchange Server VSS Provider Configuration Provider name: ETERNUS VSS Hardware Provider Provider type: Hardware Provider ID: 38A7D4B1-9B95-45ab-82E1-EDFC591307EF Version: Multipath Driver Configuration ETERNUS Multipath Driver V2.0L14 Domain Controller Microsoft Windows Server 2008 Enterprise Edition (x64), Service Pack 2 Roles: Active Directory Domain Service DNS Server All Rights Reserved Copyright FUJITSU LIMITED

7 3. Key Technologies This section describes the general outline of the key technologies - ETERNUS Advanced Copy Function and Volume Shadow Copy Service Advanced Copy Function Fujitsu ETERNUS disk storage systems provide a point-in-time copy feature that creates a copy of the source volume data at a certain point in time within the storage system without stopping the operation of a database or other applications. It is called the Advanced Copy Function. ETERNUS provides two types of replication features: One Point Copy (OPC) and Equivalent Copy (EC). With OPC, a copy volume can be instantly created on demand. With EC, the source and target volumes are previously synchronized and spilt when the replicated volume is required. Our evaluation program is performed with QuickOPC Volume Shadow Copy Service Volume Shadow Copy Service (VSS) is a function that creates a snapshot copy of a volume on a Microsoft Windows Server. By using the Advanced Copy Function of the ETERNUS disk storage systems with VSS compatible business applications and backup software, it is possible to create snapshot copies with zero server loads. The ETERNUS VSS Hardware Provider (VSSHP) is software that is compatible with the Microsoft Volume Shadow Copy Service interface, offering the services of the ETERNUS disk storage systems. VSSHP makes it possible to backup using the ETERNUS disk storage systems Advanced Copy Function with backup software that is compatible with windows VSS. VSSHP supports both Windows Server 2003 and All Rights Reserved Copyright FUJITSU LIMITED

8 4. Allocation of Mailbox Database and Logs The Mailbox database and logs must be located on the volumes of ETERNUS disk storage systems. This makes it possible to use the high reliability and performance of the ETERNUS disk storage systems in the Exchange messaging environment. This section provides the steps to create a new storage group on the ETERNUS disks, to create a new mailbox database in the new storage group, and to move existing mailbox recipients to the new mailbox database Creating New Storage Group This section includes the steps to create a new storage group for Exchange Server Start the Exchange Management Console on the Exchange server. 2. Select [Server Configuration]-[Mailbox] on the left pane. 3. Click [New Storage Group ] on the right pane. 4. Specify the storage group name on the New Storage Group window. Click [Browse] to specify the path on the volume of ETERNUS disk storage systems. Figure 1: New Storage Group Window 5. Click [New] to create the new storage group. 6. Read and accept the completion status, and then click [Finish]. All Rights Reserved Copyright FUJITSU LIMITED

9 4-2. Creating New Mailbox Database After the creation of the new storage group, perform the following steps to create a new mailbox database in the new storage group. 1. Start the Exchange Management Console on the Exchange server. 2. Select [Server Configuration]-[Mailbox] on the left pane. 3. Select the storage group created in the previous section, and click [New Mailbox Database ] on the right pane. 4. Specify the Mailbox database name on New Mailbox Database window. Click [Browse] to specify the path created on ETERNUS disk storage systems volume. Figure 2: New Mailbox Database Window 5. Click [New] to create the new mailbox database. 6. Read and accept the completion status, and then click [Finish]. All Rights Reserved Copyright FUJITSU LIMITED

10 4-3. Moving Mailbox Recipients After the creation of new mailbox database, create mailbox recipients to use the new mailbox database. This section provides the steps to move the existing mailbox recipients to the new mailbox database. 1. Start the Exchange Management Console on the Exchange server. 2. Select [Recipient Configuration]-[Mailbox] on the left pane. 3. Select mailbox recipients to move, and then click [Move Mailbox ]. 4. Click [Browse] on Move Mailbox Introduction window to select the target mailbox database. Figure 3: Move Mailbox Introduction Window 5. Read Move Mailbox Move Option window, and then click [Next]. 6. Read Move Mailbox Move Schedule window, and then click [Next]. 7. Read Move Mailbox Move Mailbox window, and then click [Move]. 8. Read and accept the completion status, and the click [Finish]. 9. Verify that a moved mailbox recipient can read existing messages and send a new message by using Outlook or your favorite messaging client software. All Rights Reserved Copyright FUJITSU LIMITED

11 5. Installing ETERNUS VSS Hardware Provider This section includes the steps to install ETERNUS VSSHP and to verify the VSSHP installation. For more detailed information about the following installation or configuration sections, please see the Software Information ETERNUS VSS Hardware Provider. The installation and configuration of ETERNUS VSSHP includes the following tasks: 1. Install the VSSHP package on the Backup and Exchange server. 2. Setup the VSSHP configuration on the Backup and Exchange server. 3. Restart the Backup and Exchange server, and then verify the VSSHP installation. 4. Using the diskshadow command line tool included in the Windows Server 2008, verify the VSSHP backup environment Installing ETERNUS VSSHP This section explains how to install the ETERNUS VSSHP. 1. Login to the Backup Server as a local administrator. 2. Double-click the VSSHP package (setup.exe) to start the install wizard. The Welcome window is displayed. Click [Next] to continue. Figure 4: InstallShield Wizard Welcome Window All Rights Reserved Copyright FUJITSU LIMITED

12 3. Click [Next] to accept the default directory for the installation files. Figure 5: Destination Folder Window 4. Click [Install] to start the installation. Figure 6: Ready to Install the Program Window All Rights Reserved Copyright FUJITSU LIMITED

13 5. After the installation finishes successfully, the VSSHP registration confirmation window is displayed. Click [OK] to register a provider. Figure 7: VSSHP Registration Confirmation Window 6. Click [OK] to confirm the successful registration. Figure 8: VSSHP Registration Successful Window 7. Complete Section to setup the VSSHP configuration. 8. Complete Section 5-1 for the Exchange Server and then complete Confirm the completion of the installation, and then click [Finish] to exit the wizard. Figure 9: InstallShield Wizard Completed Window All Rights Reserved Copyright FUJITSU LIMITED

14 5-2 Setting up ETERNUS VSS Hardware Provider This section explains how to setup the ETERNUS VSSHP. The VSSHP setup includes the following tasks. 1. Select server type on the server selection window 2. Confirm the port number of the VSSHP communication 3. Register the target volume on the pool management window. 4. Open the VSSHP communication port in the Windows Firewall Setting up ETERNUS VSSHP for the Backup server 1. After the completion of the VSSHP registration, the server selection window is displayed. Click [Backup Server] to select the Backup server. Figure 10: Server Selection Window (Backup Server) 2. The port number for the VSSHP communication service window is displayed. Confirm the port number and then click [OK]. Figure 11: Port number Confirmation Window 3. The confirmation for the target disk registration window is displayed. Click [OK] to proceed. All Rights Reserved Copyright FUJITSU LIMITED

15 Figure 12: Confirmation for the Target Disk Registration Window 4. The Pool Management Window is started. All the disks of ETERNUS disk storage system which are recognized by the server are displayed in the Disk List pane. Select the disk for the target of Shadow Copy, and then click [--->]. Figure 13: Pool Management Window 5. Selected disks are displayed in the Target Disk List pane. Complete the disk selection for the target of Shadow Copy, and then click [OK]. Figure 14: Pool Management Window (after the disk selection) Setting up ETERNUS VSSHP for the Exchange server 1. Click [Production Server] on the server selection window. All Rights Reserved Copyright FUJITSU LIMITED

16 Figure 15: Server Selection Window (Production Server) 2. IP address registration window is displayed. Specify the Backup server IP address, and then click [OK]. Figure 16: IP Address Registration Window 3. The Computer name of the Backup server is displayed. Confirm the computer name, and then click [OK]. Figure 17: Computer Name Confirmation Window 4. Click [Cancel] on the confirmation for the target disk registration window. There is no need to register the target disk on the Exchange server. Figure 18: Confirmation for the Target Disk Registration Window (Cancel) All Rights Reserved Copyright FUJITSU LIMITED

17 Open VSSHP Communication Port Since the Windows Server 2008 Firewall is enabled by default, open the port for the communications service to be able to connect to the Exchange server. 1. Login to the Backup server as a local administrator. Click [Start]-[Control Panel]-[Windows Firewall]. Figure 19: Windows Firewall Window 2. Click [Change settings]. All Rights Reserved Copyright FUJITSU LIMITED

18 Figure 20: Windows Firewall Window 3. Click [Exceptions] tab and then click [Add port ]. 4. Specify Name and Port number. Port number should be the same value in the services file. And then click [OK]. Figure 21: Windows Firewall Add a Port Window 5. Click [OK] to confirm and close Windows Firewall Settings. All Rights Reserved Copyright FUJITSU LIMITED

19 Figure 22: Windows Firewall Settings Window All Rights Reserved Copyright FUJITSU LIMITED

20 5-3. Verifying the VSSHP Installation To confirm the normal installation of VSSHP, perform the following steps. 1. Confirm the successful registration of the ETERNUS VSS Hardware Provider. 2. Confirm the successful registration of the VSSHP Communication Service. 3. Verify VSSHP Operation with Diskshadow tool Confirm the ETERNUS VSSHP registration 1. Restart the Backup server. 2. Login to the Backup server as a local administrator. 3. Click [Start]-[Command Prompt]. 4. Type the following command to confirm that VSSHP is registered successfully. C:\>vssadmin list providers Example: Figure 23: Output of vssadmin command 5. Close the Command prompt window. 6. Complete Selection for the Exchange server Confirm the ETERNUS VSSHP Communication Service 1. Login to the Backup server as a local administrator. 2. Click [Start]-[Administrative Tools]-[Services]. 3. Confirm that ETERNUS VSSHP Communication Service Status is Started and Startup Type is Automatic". All Rights Reserved Copyright FUJITSU LIMITED

21 Figure 24: Services Window Verifying VSSHP Operations with DISKSHADOW To verify that the VSS functionality works correctly, you can use the Diskshadow command tool. Diskshadow is bundled in Windows Server 2008 provided from Microsoft as a VSS test tool. You can test the snapshot creation of VSSHP with Diskshadow command. The test procedure includes the following tasks; 1. Login to the Exchange server as a local administrator. 2. Execute diskshadow in Command Prompt to start diskshadow prompt. 3. Execute "set context persistent" subcommand. 4. Execute "set option transportable" subcommand. 5. Execute "set metadata" subcommand. This subcommand requires meta data file name as an argument. In the example below, meta data file is set to "c:\metadata.cab". 6. Execute "add volume" subcommand. This subcommand requires backup source drive information. In the example below, backup source drive is s:. 7. Execute "create" subcommand to start VSS backup. If this subcommand finishes with no errors, VSS backup created successfully. 8. Verify the Windows Event Log contains no errors. 9. Execute "end backup" subcommand, and then execute "exit" subcommand to end Diskshadow prompt. Example: All Rights Reserved Copyright FUJITSU LIMITED

22 Figure 25: diskshadow command at Exchange server 10. Copy metadata.cab created in task 5 to the Backup server manually. 11. Login to the Backup server as a local administrator. 12. Execute diskshadow in Command Prompt to start diskshadow prompt. 13. Execute "load metadata" subcommand. Specify full pathname of meta data file copied in task Execute "import" subcommand. 15. Verify the Windows Event Log contains no errors. 16. Confirm STXV0560 message in the application log of the Exchange server. This means that VSSHP started creating shadowcopy. 17. Mount the snapshot target drive, and then confirm snapshot data created successfully. 18. After the confirmation, it is recommended to remove unnecessary shadowcopy data. Execute "list shadows" subcommand to find unnecessary shadowcopy data, and then execute "delete shadows" subcommand to delete it. 19. Confirm that shadowcopy data has the same [Shadow copy ID] and same [Shadow copy set] as those that created in task 6. Also confirm the [Provider ID] is same as ETERNUS VSS Hardware Provider. In the example below, "list shadows" subcommand is executed to list [Shadow copy ID] and [Shadow copy set], and then "delete shadows" subcommand is executed along with [Shadow copy ID] of unnecessary shadowcopy data. 20. Subcommand "delete shadows all" deletes all shadowcopy data, so please use this command carefully. 21. Execute "exit" to end diskshadow command prompt. Example: All Rights Reserved Copyright FUJITSU LIMITED

23 Figure 26: diskshadow command at Backup Server For more detailed information about Diskshadow command, please see the following URL; All Rights Reserved Copyright FUJITSU LIMITED

24 6. Installing Symantec Backup Exec for Windows Servers After verifying the VSSHP installation, you can start installing Backup Exec for Windows Servers. The following section describes the Backup Exec installation overview. 1. Install the Backup Exec Media Server on the Backup server. 2. From the Backup Server, install Backup Exec Remote Agent on the Exchange server. 3. Install the Exchange MAPI Client on the Exchange server. For more detailed information about the following installation, please refer to the Symantec Backup Exec for Windows Servers Administrator s Guide Installing Backup Exec To install Backup Exec, you should perform the following steps. 1. Login to the Backup server as a domain administrator. 2. Start the Backup Exec CD Browser from the CD media. 3. Click [Start the Backup Exec Installation]. 4. On the Welcome panel, click [Next]. 5. Select [I accept the term of the license agreement] on the License Agreement window, then click [Next]. 6. Check [Local Install] and [Install Backup Exec software and options], and then click [Next]. Figure 27: Backup Exec Install Menu Window (Local Install) 7. Review the Environment Check result, and then click [Next]. 8. Since we will be using the evaluation version this time, specify no License keys and click [Next]. All Rights Reserved Copyright FUJITSU LIMITED

25 9. Select the following optional components on the Symantec Backup Exec Options window, then click [Next]. -Agent for Microsoft Exchange Servers -Advanced Disk-based Backup Option Figure 28: Backup Exec Options Window (Local Install) 10. Provide the Backup Exec system account user name, password, and domain. This must be a domain Administrator account. Then click [Next]. 11. Check [Create a local Backup Exec SQL Express instance to store the database on. This instance will be installed in C:\Program Files\Microsoft SQL Server\MSSQL$BACKUPEXEC], and then click [Next]. 12. Check [Use Symantec device drivers for all tape devices (recommended)] on the Symantec Tape Device window, and then click [Next]. 13. Review the Ready to Install the Program window, and the click [Install]. 14. Click [Finish] on the Install Wizard Completed window to exit. All Rights Reserved Copyright FUJITSU LIMITED

26 6-2. Installing Backup Exec Remote Agent The Backup Exec Remote Agent can be installed remotely on the Exchange server from the Backup server. This section provides the steps to install the Remote Agent. 1. Login to the Backup server as a domain administrator. 2. Start the Backup Exec CD Browser from the CD media. 3. Click [Start the Backup Exec Installation]. 4. On the Welcome panel, click [Next]. 5. Select [I accept the term of the license agreement] on the License Agreement window, and then click [Next]. 6. Check [Remote Install], and then click [Next]. Figure 29: Backup Exec Install Menu (Remote Install) 7. Select [Windows Remote Agents] on the Symantec Backup Exec Remote Install window, and then click [Add]. 8. Provide the IP address of the Exchange server and domain name on the Manual Entry of Remote Computer Name prompt, and then click [OK]. 9. Provide a domain administrator account name and password on the Remote Computer Logon Credentials window, and then click [OK]. All Rights Reserved Copyright FUJITSU LIMITED

27 10. Check the following option on the Symantec Backup Exec Options window, and then click [Finish]. -Remote Agent for Windows Servers Figure 30: Backup Exec Options Window (Remote Install) 11. Confirm that the name of Backup server is displayed on the Publish Remote Agent Information window, and then click [OK]. 12. Review the Backup Exec Installation Review window, and then click [Next]. 13. Review the Ready to Install the Program window, and then click [Install]. 14. Confirm that the install status reaches 100% on the Remote Installation Status window, and then click [Next]. 15. Click [Finish] on the Install Wizard Completed window to exit the installation. All Rights Reserved Copyright FUJITSU LIMITED

28 6-3. Installing Exchange MAPI Client This section includes the steps to install the Microsoft Exchange MAPI Client on the Exchange server. This installation enables you to use the combination of Exchange and Backup Exec GRT function (to be described later). 1. Prepare the Microsoft Messaging API and Collaboration Data Object (see Section 2). 2. Login to the Exchange server as a local administrator. 3. Double-click ExchangeMapiCdo.exe. 4. Double-click the extracted file ExchangeMapiCdo.msi to start the installation. 5. Confirm that the following window is displayed, and then click [Finish] to complete the installation. Figure 31: MAPI Client Installation Complete Window All Rights Reserved Copyright FUJITSU LIMITED

29 7. Exchange Backup and Restore This section provides the steps to backup the Exchange mailbox database with VSSHP, and to restore the mailbox database from the VSS backup. VSSHP supports a two server configuration, such as an Exchange server and a Backup server. In this environment, the backup is performed as a Symantec Backup Exec Offhost backup. Offhost backup enables Backup Exec to move backup processing from the Exchange server to the Backup server. This process includes executing the Exchange utility to check the consistency of the backup data. ETERNUS disk storage systems perform the high-speed Advanced Copy at the request of Backup Exec via VSSHP. Backup Exec obtains the backup data from the target volumes of the Advanced Copy of ETERNUS disk storage systems. Restore of the Exchange mailbox database is performed using Backup Exec functions. We confirmed three kinds of restores in this evaluation program. 1. Full restore of the Mailbox database: It is assumed that the mailbox is corrupt or damaged. 2. Restoring the individual mailbox data with GRT: It is assumed that a particular mailbox user deleted messages by mistake. 3. Restoring the messages from the Recovery Storage Group: It is assumed that no system interruption is permitted when the restoring operation is performed Performing Off-Host VSS Backup To execute a backup with VSSHP, perform the following steps to create the job. 1. On the Backup server, click [Backup Task]-[New Job] on the Backup Exec Job Setup window. 2. Select the Exchange Information Store as a backup resource. Select [Source]-[Selections], and then expand [Domains]-[Active Directory Domains]-[domain name]-[mailbox server name]-[microsoft Information Store] on the View by Resource pane. Figure 32: Backup Job Selections Window All Rights Reserved Copyright FUJITSU LIMITED

30 Verify that storage group name and mailbox name are displayed correctly, and then check the storage group name. If the Microsoft Information Store is not displayed on the View by Resource pane, confirm the Microsoft Information Store service is started normally on the Exchange server. If the service is not started, start the service manually and restart creating the backup job. 3. Select [Settings]-[Advanced Disk-based Backup Option], and then specify as follows: -Use offhost backup to move backup processing from remote computer to media server -> Check. -Snapshot provider -> Select Hardware Use Technology provided by hardware manufacturer. -Job disposition -> Select Fail back up job [further selections are not backed up after failure occurs]. -Process logical volumes for offhost backup one at a time -> Check. Figure 33: Backup Job Advanced Disk-based Backup Window All Rights Reserved Copyright FUJITSU LIMITED

31 4. Select [Settings]-[Microsoft Exchange], and then specify as follows: -Backup Method -> Select Full Database and Logs [flush committed logs]. -Continuously back up transaction logs with Backup Exec Continuous Backup Server -> Uncheck. -Use Backup Exec Granular Recovery Technology to enable the restore of individual mailboxes, mail messages, and public folders from Information Store backups [Exchange 2000 and later only; Incremental backups supported with policy-based backup only] -> Check. -Perform consistency check before backup when using Microsoft Volume Shadow Copy Service [VSS] snapshot provider -> Uncheck. -If Exchange 2007 backup source is LCR or CCR -> Do not change. Figure 34: Backup Job Microsoft Exchange Window All Rights Reserved Copyright FUJITSU LIMITED

32 5. Verify the above specification, and then click [Run Now]. 6. Refer to the job history and verify the successful completion on the Job Monitor window. Figure 35: Backup Exec Job Monitor Window All Rights Reserved Copyright FUJITSU LIMITED

33 7-2. Restoring from Exchange Backup To restore the mailbox database from an Off-Host backup, perform the following steps to create and execute the restore job in the Backup Exec Job Setup window. 1. Before you start restoring the mailbox database, you should dismount the mailbox database from the Exchange Management Console. 2. On the Backup server, click [Restore Task]-[New job] on the Backup Exec Job Setup window. 3. Select [Source]-[Selection], and then expand [All Resources]-[mailbox server name]-[microsoft Information Store]-[storage group name]-[backup date]-[mailbox name], and then select mailbox name. Figure 36: Restore Job Selections Window All Rights Reserved Copyright FUJITSU LIMITED

34 4. Do not change the settings of [Settings]-[Microsoft Exchange]. Figure 37: Restore Job Microsoft Exchange Window 5. Click [Run Now] to start the restore job. 6. Confirm the successful completion of the restore job, and mount the target mailbox database. 7. Confirm that the messages that are sent and received before backup was taken are restored successfully from mail client software. All Rights Reserved Copyright FUJITSU LIMITED

35 7-3. Recovering Mailbox Data with GRT With the Granular Recovery Technology (hereinafter GRT), it is possible to recover the individual mailbox data with an easy operation. To recover the mailbox data with GRT, perform the following steps: 1. Dismount the Exchange mailbox. 2. On the Backup server, create the restore job. Select [Source]-[Selections] on the Job Setup Window, and expand [All Resources]-[mailbox server name]-[microsoft Information Store]-[storage group name]-[backup date]-[mailbox name]-[target account name], and the select the mailbox recipient(s). 3. Do not change the settings of [Settings]-[Microsoft Exchange]. 4. Click [Run Now] to start the restore job. Figure 38: Backup Job Selections Window (Individual Mailbox selection) All Rights Reserved Copyright FUJITSU LIMITED

36 5. Confirm the successful completion of the restore job, and then mount the mailbox database. 6. Start mail client software and confirm the messages are successfully restored. Figure 39: Outlook Web Access Window All Rights Reserved Copyright FUJITSU LIMITED

37 7-4. Recovering Mailbox Data from RSG Backup Exec supports recovery from the Recovery Storage Group provided by Microsoft. To use the Recovery Storage Group, perform the following steps: 1. On the Exchange server, double-click [Disaster recovery tools]-[database Recovery Management] on the Exchange Management Console to start the Troubleshooting Assistant. Figure 40: Exchange Management Console Toolbox Window All Rights Reserved Copyright FUJITSU LIMITED

38 2. Click [Manage Recovery Storage Group]-[Create recovery storage group] to create the Recovery Storage Group. Figure 41: Troubleshooting Assistant Server and User Information Window 3. Create the restore job on the Backup Exec Job Setup Window. Select the same items [Resource]-[Selections] as a normal database restore job. All Rights Reserved Copyright FUJITSU LIMITED

39 4. Select [Destination]-[Microsoft Exchange Redirection], and check the following check boxes: -Redirect Exchange sets -Redirect using Volume Shadow Copy Service (VSS) snapshot provider -Redirect to Recovery Storage Group (RSG) [Exchange 2007 only] Figure 42: Restore Job Microsoft Exchange Redirection Window 5. Do not change the settings of [Settings]-[Microsoft Exchange]. 6. Click [Run Now] to start the restore job. 7. Confirm the successful completion of the restore job, and then mount the mailbox database of the Recovery Storage Group. 8. Start the Troubleshooting Assistant from the Exchange Management Console. All Rights Reserved Copyright FUJITSU LIMITED

40 9. Select [Manage Recovery Storage Group]-[Merge or copy mailbox contents], and then merge the mailbox database. Figure 43: Troubleshooting Assistant Recovery Storage Group Selection Window 10. Confirm that the messages are restored successfully from mail client software. All Rights Reserved Copyright FUJITSU LIMITED

41 8. Exchange Server CCR Environment Cluster Continuous Replication (CCR) is a high availability feature of Microsoft Exchange Server 2007 that combines the asynchronous log shipping and replay technology built into Exchange 2007 with the failover and management features provided by the Cluster service. The Mailbox database and transaction logs are being replicated from the Active Mailbox server to the Passive Mailbox server with the log shipping. If the Active Mailbox server fails, Exchange can continue the messaging service on the Passive Mailbox server with the Cluster failover technology. The combination of ETERNUS VSSHP and BEWS 12.5 works normally in the Exchange CCR environment. You can back up the mailbox database and restore the individual mailbox data with the same operation as on the single mailbox environment. To configure ETERNUS VSSHP and Symantec Backup Exec for Windows 12.5 in the Exchange CCR environment, perform the following steps: 1. Before you start installing ETERNUS VSSHP 1.3.1, make sure that Exchange CCR works normally. 2. Install the ETERNUS VSSHP on the Active Mailbox server, the Passive Mailbox server, and the Backup Server. Please refer Section 5 for the installation tasks. 3. Install the Backup Exec Media Server on the Backup server and install the Backup Exec Remote Agent on both the Active and Passive Mailbox server. Please see Section Install the Exchange MAPI client on both the Active and Passive Mailbox server. 5. Create the backup job on the Backup server. On the Backup job properties window, select [Settings]-[Microsoft Exchange], and then specify the following value in the [If Exchange 2007 backup source is LCR or CCR]: -> Back up from the active copy only 6. You can back up and restore the mailbox data with the same operation as on the single mailbox server. Please see Section 7. All Rights Reserved Copyright FUJITSU LIMITED

42 9. Conclusion With the combination of Exchange Server 2007, Backup Exec 12.5, and ETERNUS VSSHP, a highly protected messaging environment is created on the Fujitsu ETERNUS disk storage system. This combination provides the solution for high-speed backup without any system interruption, and the flexible recovery of both full mailbox restores and individual mailbox recovery Summary of Configuration Tasks 1. Allocate the Exchange mailbox database and logs on the ETERNUS disk storage systems. 2. Install the ETERNUS VSSHP on the Exchange server and Backup server. 3. Configure the VSSHP to take One Point Copy (OPC) backup of mailbox database and logs on the Exchange server. 4. Configure the Backup server to recognize OPC target volumes. 5. Install Backup Exec 12.5 on the Backup server and Backup Exec 12.5 Remote Agent on the Exchange Server. 6. Create and execute an offhost backup job on the Backup server. 7. Restore and recovery with Backup Exec functions: -Restoring from an Exchange backup -Recovering mailbox data with GRT (Granular Recovery Technology) -Recovering mailbox data from Recovery Storage Group All Rights Reserved Copyright FUJITSU LIMITED

43 Appendix A: Reference VSSHP Software Information ETERNUS VSS Hardware Provider Symantec Backup Exec Symantec Backup Exec 12.5 for Windows Servers Administrator s Guide Microsoft Exchange Server Fujitsu ETERNUS Disk Storage Systems All Rights Reserved Copyright FUJITSU LIMITED

44 Appendix B: Glossary ADBO Advanced Disk-Based Backup Option CAS Client Access Server CCR Cluster Continuous Replication GRT Granular Recovery Technology HUB Hub Transport Server VSS MAPI Messaging Application Program Interface MB Mailbox Server OPC One Point Copy RSG Recovery Storage Group VSS Volume Shadow Copy Service VSSHP VSS Hardware Provider All Rights Reserved Copyright FUJITSU LIMITED

45 The contents of this document may change without notice. Please inform Fujitsu Limited of any error found in this document. Fujitsu Limited does not provide any guarantee as to the contents of this document. In addition Fujitsu Limited does not take responsibility for any damage resulting from use of the contents of this document. FUJITSU LIMITED All Rights Reserved Copyright FUJITSU LIMITED 2009

WHITE PAPER VSS BACKUP SOLUTION FOR EXCHANGE SERVER 2007

WHITE PAPER VSS BACKUP SOLUTION FOR EXCHANGE SERVER 2007 WHITE PAPER [VSS BACKUP SOLUTION FOR EXCHANGE SERVER 2007] WHITE PAPER VSS BACKUP SOLUTION FOR EXCHANGE SERVER 2007 VSS BACKUP SOLUTION FOR EXCHANGE SERVER 2007 AND SYMANTEC BACKUP EXEC 12.5 USING ETERNUS

More information

HP LeftHand SAN Solutions

HP LeftHand SAN Solutions HP LeftHand SAN Solutions Support Document Application Notes Backup Exec 11D VSS Snapshots and Transportable Offhost Backup Legal Notices Warranty The only warranties for HP products and services are set

More information

Symantec Backup Exec 12.5 for Windows Servers. Quick Installation Guide

Symantec Backup Exec 12.5 for Windows Servers. Quick Installation Guide Symantec Backup Exec 12.5 for Windows Servers Quick Installation Guide 13897290 Installing Backup Exec This document includes the following topics: System requirements Before you install About the Backup

More information

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide Symantec Backup Exec TM 11d for Windows Servers Quick Installation Guide September 2006 Symantec Legal Notice Copyright 2006 Symantec Corporation. All rights reserved. Symantec, Backup Exec, and the Symantec

More information

User Guide - Exchange Database idataagent

User Guide - Exchange Database idataagent Page 1 of 208 User Guide - Exchange Database idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Customized Features for Your Exchange Version Terminology SYSTEM REQUIREMENTS

More information

BackupAssist v6 quickstart guide

BackupAssist v6 quickstart guide Using the new features in BackupAssist v6... 2 VSS application backup (Exchange, SQL, SharePoint)... 2 Backing up VSS applications... 2 Restoring VSS applications... 3 System State backup and restore...

More information

Administration GUIDE. Exchange Database idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233

Administration GUIDE. Exchange Database idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233 Administration GUIDE Exchange Database idataagent Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233 User Guide - Exchange Database idataagent Table of Contents Overview Introduction Key Features

More information

Symantec NetBackup Blueprints

Symantec NetBackup Blueprints Symantec NetBackup Blueprints Blueprint for Microsoft Exchange Symantec Backup and Recovery Technical Services Symantec NetBackup Blueprints 1 Symantec NetBackup Blueprints Preface/disclaimer Notice This

More information

VERITAS Backup Exec TM 10.0 for Windows Servers

VERITAS Backup Exec TM 10.0 for Windows Servers VERITAS Backup Exec TM 10.0 for Windows Servers Quick Installation Guide N134418 July 2004 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software

More information

User Guide - Exchange Public Folder idataagent

User Guide - Exchange Public Folder idataagent Page 1 of 191 User Guide - Exchange Public Folder idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Terminology SYSTEM REQUIREMENTS - EXCHANGE PUBLIC FOLDER IDATAAGENT DEPLOYMENT

More information

Exchange Server Backup and Restore

Exchange Server Backup and Restore WHITEPAPER BackupAssist Version 6 www.backupassist.com Cortex I.T. 2001-2007 2 Contents 1. Introduction... 3 1.1 Overview... 3 1.2 Requirements... 3 1.3 Requirements for remote backup of Exchange 2007...

More information

NSi Mobile Installation Guide. Version 6.2

NSi Mobile Installation Guide. Version 6.2 NSi Mobile Installation Guide Version 6.2 Revision History Version Date 1.0 October 2, 2012 2.0 September 18, 2013 2 CONTENTS TABLE OF CONTENTS PREFACE... 5 Purpose of this Document... 5 Version Compatibility...

More information

WhatsUp Gold v16.1 Installation and Configuration Guide

WhatsUp Gold v16.1 Installation and Configuration Guide WhatsUp Gold v16.1 Installation and Configuration Guide Contents Installing and Configuring Ipswitch WhatsUp Gold v16.1 using WhatsUp Setup Installing WhatsUp Gold using WhatsUp Setup... 1 Security guidelines

More information

BackupAssist v6 quickstart guide

BackupAssist v6 quickstart guide New features in BackupAssist v6... 2 VSS application backup (Exchange, SQL, SharePoint)... 3 System State backup... 3 Restore files, applications, System State and mailboxes... 4 Fully cloud ready Internet

More information

Backup Exec Private Cloud Services. Planning and Deployment Guide

Backup Exec Private Cloud Services. Planning and Deployment Guide Backup Exec Private Cloud Services Planning and Deployment Guide Chapter 1 Introducing Backup Exec Private Cloud Services This chapter includes the following topics: About Backup Exec Private Cloud Services

More information

VSS installation and application

VSS installation and application VSS installation and application Sam Lee Version 1.0 (DEC, 2010) 1 QSAN Technology, Inc. http://www.qsantechnology.com White Paper# QWP201010-P300H lntroduction This document introduces how to perform

More information

English ETERNUS CS800 S3. Backup Exec OST Guide

English ETERNUS CS800 S3. Backup Exec OST Guide English ETERNUS CS800 S3 Backup Exec OST Guide Edition April 2012 Comments Suggestions Corrections The User Documentation Department would like to know your opinion on this manual. Your feedback helps

More information

Quick Start guide to. Microsoft Business Solutions CRM 1.2. on a Microsoft Windows Small Business Server 2003 Premium Edition.

Quick Start guide to. Microsoft Business Solutions CRM 1.2. on a Microsoft Windows Small Business Server 2003 Premium Edition. Quick Start guide to Microsoft Business Solutions CRM 1.2 on a Microsoft Windows Small Business Server 2003 Premium Edition M Partner Program Welcome! There are many resources available to help you install

More information

Cloud Services for Backup Exec. Planning and Deployment Guide

Cloud Services for Backup Exec. Planning and Deployment Guide Cloud Services for Backup Exec Planning and Deployment Guide Chapter 1 Introducing Cloud Services for Backup Exec This chapter includes the following topics: About Cloud Services for Backup Exec Security

More information

EMC NetWorker Module for Microsoft Exchange Server Release 5.1

EMC NetWorker Module for Microsoft Exchange Server Release 5.1 EMC NetWorker Module for Microsoft Exchange Server Release 5.1 Installation Guide P/N 300-004-750 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

User Guide - Exchange Mailbox idataagent

User Guide - Exchange Mailbox idataagent Page 1 of 285 User Guide - Exchange Mailbox idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Terminology SYSTEM REQUIREMENTS - EXCHANGE MAILBOX IDATAAGENT DEPLOYMENT -

More information

Using Symantec NetBackup with VSS Snapshot to Perform a Backup of SAN LUNs in the Oracle ZFS Storage Appliance

Using Symantec NetBackup with VSS Snapshot to Perform a Backup of SAN LUNs in the Oracle ZFS Storage Appliance An Oracle Technical White Paper March 2014 Using Symantec NetBackup with VSS Snapshot to Perform a Backup of SAN LUNs in the Oracle ZFS Storage Appliance Introduction... 2 Overview... 3 Oracle ZFS Storage

More information

SYMANTEC BACKUPEXEC2010 WITH StorTrends

SYMANTEC BACKUPEXEC2010 WITH StorTrends SYMANTEC BACKUPEXEC2010 WITH StorTrends 1 Index 1. Introduction 3 2. Test Environment 3 3. System Requirement 4 4. Storage Requirement 4 5. Installation of Symantec Backup EXEC 2010 4 6. Installing Backup

More information

Symantec Backup Exec 11d for Windows Servers Sets the Standard for Exchange 2007 Server Data Protection

Symantec Backup Exec 11d for Windows Servers Sets the Standard for Exchange 2007 Server Data Protection Symantec Backup Exec 11d for Windows Servers Sets the Standard for Exchange 2007 Server Data Protection Agent for Microsoft Exchange Server TechPDF Peter Imming, Backup Exec Product Management April 16,

More information

SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore

SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore Document Scope This solutions document describes how to configure and use the Microsoft Exchange InfoStore Backup and Restore feature in

More information

Managed Backup Service Agent 6.10a for Microsoft Windows. Software Installation Guide

Managed Backup Service Agent 6.10a for Microsoft Windows. Software Installation Guide Managed Backup Service Agent 6.10a for Microsoft Windows Software Installation Guide Table of Contents Introduction and Installation... 3 System Requirements... 3 How the Windows Agent Works... 3 Installation

More information

CA ARCserve and CA XOsoft r12.5 Best Practices for protecting Microsoft Exchange

CA ARCserve and CA XOsoft r12.5 Best Practices for protecting Microsoft Exchange CA RECOVERY MANAGEMENT R12.5 BEST PRACTICES CA ARCserve and CA XOsoft r12.5 Best Practices for protecting Microsoft Exchange Overview Benefits The CA Advantage The CA ARCserve Backup Support and Engineering

More information

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide N109548 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software Corporation makes

More information

Installing the Microsoft Network Driver Interface

Installing the Microsoft Network Driver Interface Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's

More information

Backup Exec 15. Quick Installation Guide

Backup Exec 15. Quick Installation Guide Backup Exec 15 Quick Installation Guide 21344987 Documentation version: 15 PN: 21344987 Legal Notice Copyright 2015 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, the Checkmark

More information

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide Symantec NetBackup for Microsoft Exchange Server Administrator s Guide for Windows Release 7.6 Symantec NetBackup for Microsoft Exchange Server Administrator's Guide The software described in this book

More information

WhatsUp Gold v16.2 Installation and Configuration Guide

WhatsUp Gold v16.2 Installation and Configuration Guide WhatsUp Gold v16.2 Installation and Configuration Guide Contents Installing and Configuring Ipswitch WhatsUp Gold v16.2 using WhatsUp Setup Installing WhatsUp Gold using WhatsUp Setup... 1 Security guidelines

More information

Installation Instruction STATISTICA Enterprise Small Business

Installation Instruction STATISTICA Enterprise Small Business Installation Instruction STATISTICA Enterprise Small Business Notes: ❶ The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations

More information

SnapManager 7.0 for Microsoft Exchange Server

SnapManager 7.0 for Microsoft Exchange Server SnapManager 7.0 for Microsoft Exchange Server Installation and Administration Guide NetApp, Inc. 495 East Java Drive Sunnyvale, CA 94089 U.S. Telephone: +1 (408) 822-6000 Fax: +1 (408) 822-4501 Support

More information

EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014. Version 1

EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014. Version 1 EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014 Version 1 NEC EXPRESSCLUSTER X 3.x for Windows SQL Server 2014 Quick Start Guide Document Number ECX-MSSQL2014-QSG, Version

More information

Metalogix SharePoint Backup. Advanced Installation Guide. Publication Date: August 24, 2015

Metalogix SharePoint Backup. Advanced Installation Guide. Publication Date: August 24, 2015 Metalogix SharePoint Backup Publication Date: August 24, 2015 All Rights Reserved. This software is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this

More information

Operating System Installation Guide

Operating System Installation Guide Operating System Installation Guide This guide provides instructions on the following: Installing the Windows Server 2008 operating systems on page 1 Installing the Windows Small Business Server 2011 operating

More information

WhatsUp Gold v16.3 Installation and Configuration Guide

WhatsUp Gold v16.3 Installation and Configuration Guide WhatsUp Gold v16.3 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup Installation Overview... 1 Overview... 1 Security considerations... 2 Standard

More information

STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS

STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS Notes 1. The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b)

More information

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide Symantec NetBackup for Microsoft Exchange Server Administrator s Guide for Windows Release 7.5 Symantec NetBackup for Microsoft Exchange Server Administrator s Guide The software described in this book

More information

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide

Symantec NetBackup for Microsoft Exchange Server Administrator s Guide Symantec NetBackup for Microsoft Exchange Server Administrator s Guide for Windows Release 7.5 Symantec NetBackup for Microsoft Exchange Server Administrator s Guide The software described in this book

More information

Pearl Echo Installation Checklist

Pearl Echo Installation Checklist Pearl Echo Installation Checklist Use this checklist to enter critical installation and setup information that will be required to install Pearl Echo in your network. For detailed deployment instructions

More information

Enterprise Manager. Version 6.2. Installation Guide

Enterprise Manager. Version 6.2. Installation Guide Enterprise Manager Version 6.2 Installation Guide Enterprise Manager 6.2 Installation Guide Document Number 680-028-014 Revision Date Description A August 2012 Initial release to support version 6.2.1

More information

STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER

STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable

More information

EVault for Data Protection Manager. Course 321 Protecting Exchange 2010 with DPM

EVault for Data Protection Manager. Course 321 Protecting Exchange 2010 with DPM EVault for Data Protection Manager Course 321 Protecting Exchange 2010 with DPM Table of Contents Objectives... 3 Scenario... 3 Estimated Time to Complete This Lab... 3 Requirements for This Lab... 3 Computers

More information

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition Installation Guide P/N 300-003-994 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com

More information

User Guide - Exchange Mailbox Archiver Agent

User Guide - Exchange Mailbox Archiver Agent Page 1 of 245 User Guide - Exchange Mailbox Archiver Agent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Terminology SYSTEM REQUIREMENTS - EXCHANGE MAILBOX ARCHIVER AGENT DEPLOYMENT

More information

Exchange Mailbox Protection Whitepaper

Exchange Mailbox Protection Whitepaper Exchange Mailbox Protection Contents 1. Introduction... 2 Documentation... 2 Licensing... 2 Exchange add-on comparison... 2 Advantages and disadvantages of the different PST formats... 3 2. How Exchange

More information

Installation Instruction STATISTICA Enterprise Server

Installation Instruction STATISTICA Enterprise Server Installation Instruction STATISTICA Enterprise Server Notes: ❶ The installation of STATISTICA Enterprise Server entails two parts: a) a server installation, and b) workstation installations on each of

More information

Migrating MSDE to Microsoft SQL 2008 R2 Express

Migrating MSDE to Microsoft SQL 2008 R2 Express How To Updated: 11/11/2011 2011 Shelby Systems, Inc. All Rights Reserved Other brand and product names are trademarks or registered trademarks of the respective holders. If you are still on MSDE 2000,

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 User Guide P/N 300-999-671 REV 02 Copyright 2007-2013 EMC Corporation. All rights reserved. Published in the USA.

More information

Archive Attender Version 3.5

Archive Attender Version 3.5 Archive Attender Version 3.5 Getting Started Guide Sherpa Software (800) 255-5155 www.sherpasoftware.com Page 1 Under the copyright laws, neither the documentation nor the software can be copied, photocopied,

More information

Integrating Data Protection Manager with StorTrends itx

Integrating Data Protection Manager with StorTrends itx Integrating Data Protection Manager with StorTrends itx INTEGRATING DATA PROTECTION MANAGER WITH STORTRENDS ITX 2 1. Introduction 2 2. Test Environment 2 Requirements 2 3. Setting up the Application Servers

More information

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide

SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide SC-T35/SC-T45/SC-T46/SC-T47 ViewSonic Device Manager User Guide Copyright and Trademark Statements 2014 ViewSonic Computer Corp. All rights reserved. This document contains proprietary information that

More information

FalconStor Recovery Agents User Guide

FalconStor Recovery Agents User Guide FalconStor Recovery Agents User Guide FalconStor Software, Inc. 2 Huntington Quadrangle Melville, NY 11747 Phone: 631-777-5188 Fax: 631-501-7633 Web site: www.falconstor.com Copyright 2007-2009 FalconStor

More information

Acronis Backup & Recovery 11.5

Acronis Backup & Recovery 11.5 Acronis Backup & Recovery 11.5 Update 2 Backing Up Microsoft Exchange Server Data Copyright Statement Copyright Acronis International GmbH, 2002-2013. All rights reserved. Acronis and Acronis Secure Zone

More information

Table of Contents. CHAPTER 1 About This Guide... 9. CHAPTER 2 Introduction... 11. CHAPTER 3 Database Backup and Restoration... 15

Table of Contents. CHAPTER 1 About This Guide... 9. CHAPTER 2 Introduction... 11. CHAPTER 3 Database Backup and Restoration... 15 Table of Contents CHAPTER 1 About This Guide......................... 9 The Installation Guides....................................... 10 CHAPTER 2 Introduction............................ 11 Required

More information

Use QNAP NAS for Backup

Use QNAP NAS for Backup Use QNAP NAS for Backup BACKUP EXEC 12.5 WITH QNAP NAS Copyright 2010. QNAP Systems, Inc. All Rights Reserved. V1.0 Document revision history: Date Version Changes Apr 2010 1.0 Initial release Note: Information

More information

Symantec Backup Exec 2010 R2. Quick Installation Guide

Symantec Backup Exec 2010 R2. Quick Installation Guide Symantec Backup Exec 2010 R2 Quick Installation Guide 20047221 The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the agreement.

More information

Technical Notes TECHNICAL NOTES. Release number 8.2 Service Pack 1 302-001-239 REV 01. January, 2015

Technical Notes TECHNICAL NOTES. Release number 8.2 Service Pack 1 302-001-239 REV 01. January, 2015 EMC NetWorker Module for Microsoft: Exchange Server Granular Level Recovery (GLR) using EMC NetWorker Module for Microsoft with Ontrack PowerControls Release number 8.2 Service Pack 1 TECHNICAL NOTES 302-001-239

More information

Administration GUIDE. SharePoint Server idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201

Administration GUIDE. SharePoint Server idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201 Administration GUIDE SharePoint Server idataagent Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201 Getting Started - SharePoint Server idataagent Overview Deployment Configuration Decision Table

More information

Symantec Backup Exec System Recovery Granular Restore Option User's Guide

Symantec Backup Exec System Recovery Granular Restore Option User's Guide Symantec Backup Exec System Recovery Granular Restore Option User's Guide Symantec Backup Exec System Recovery Granular Restore Option User's Guide The software described in this book is furnished under

More information

Exchange Granular Restore User Guide

Exchange Granular Restore User Guide User Guide Contents 1. overview... 2 2. Backup considerations... 3 Exchange VM Detection... 3 VSS Application backups... 3 Restore vs. Recovery... 3 Backup user identity... 3 3. Creating an Exchange backup...

More information

Support Document: Microsoft SQL Server - LiveVault 7.6X

Support Document: Microsoft SQL Server - LiveVault 7.6X Contents Preparing to create a Microsoft SQL backup policy... 2 Adjusting the SQL max worker threads option... 2 Preparing for Log truncation... 3 Best Practices... 3 Microsoft SQL Server 2005, 2008, or

More information

Exchange Mailbox Protection

Exchange Mailbox Protection User Guide This guide applies to Windows Server 2008 and later. For Windows Server 2003, refer to the Exchange Server Protection whitepaper. BackupAssist User Guides explain how to create and modify backup

More information

About This Manual. 2 About This Manual

About This Manual. 2 About This Manual Ver.4.1 Important This System Guide applies to RadiNET Pro Ver. 4.1. Please read this System Guide and the User s Manual on the RadiNET Pro CD-ROM carefully to familiarize yourself with safe and effective

More information

Migrating TimeForce To A New Server

Migrating TimeForce To A New Server Rev. 4/28/14 Migrating TimeForce To A New Server Table of Contents 1. Installation Prerequisites... 2 Required... 2 Recommended... 3 2. Update to a Migration Compatible Version... 3 Determine the Database

More information

Legal Notes. Regarding Trademarks. 2013 KYOCERA Document Solutions Inc.

Legal Notes. Regarding Trademarks. 2013 KYOCERA Document Solutions Inc. Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from

More information

Acronis Backup & Recovery 11.5. Backing Up Microsoft Exchange Server Data

Acronis Backup & Recovery 11.5. Backing Up Microsoft Exchange Server Data Acronis Backup & Recovery 11.5 Backing Up Microsoft Exchange Server Data Copyright Statement Copyright Acronis International GmbH, 2002-2012. All rights reserved. Acronis and Acronis Secure Zone are registered

More information

Cloud Services ADM. Agent Deployment Guide

Cloud Services ADM. Agent Deployment Guide Cloud Services ADM Agent Deployment Guide 10/15/2014 CONTENTS System Requirements... 1 Hardware Requirements... 1 Installation... 2 SQL Connection... 4 AD Mgmt Agent... 5 MMC... 7 Service... 8 License

More information

Features - Microsoft Data Protection Manager

Features - Microsoft Data Protection Manager Page 1 of 63 Features - Microsoft Data Protection Manager TABLE OF CONTENTS OVERVIEW SYSTEM REQUIREMENTS - MICROSOFT DATA PROTECTION MANAGER INSTALLATION Install the Microsoft Data Protection Manager BACKUP

More information

SmartFiler Backup Appliance User Guide 2.0

SmartFiler Backup Appliance User Guide 2.0 SmartFiler Backup Appliance User Guide 2.0 SmartFiler Backup Appliance User Guide 1 Table of Contents Overview... 5 Solution Overview... 5 SmartFiler Backup Appliance Overview... 5 Getting Started... 7

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Version 8.2 Service Pack 1 User Guide 302-001-235 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published

More information

@ptitude Observer. Installation Manual. Part No. 32170700 Revision G

@ptitude Observer. Installation Manual. Part No. 32170700 Revision G Part No. 32170700 Revision G Installation Manual Copyright 2012 by SKF Reliability Systems All rights reserved. Aurorum 30, 977 75 Lulea Sweden Telephone: +46 (0) 31 337 10 00, Fax: +46 (0) 920 134 40

More information

Spector 360 Deployment Guide. Version 7

Spector 360 Deployment Guide. Version 7 Spector 360 Deployment Guide Version 7 December 11, 2009 Table of Contents Deployment Guide...1 Spector 360 DeploymentGuide... 1 Installing Spector 360... 3 Installing Spector 360 Servers (Details)...

More information

Quick Start - Virtual Server idataagent (Microsoft/Hyper-V)

Quick Start - Virtual Server idataagent (Microsoft/Hyper-V) Page 1 of 19 Quick Start - Virtual Server idataagent (Microsoft/Hyper-V) TABLE OF CONTENTS OVERVIEW Introduction Key Features Complete Virtual Machine Protection Granular Recovery of Virtual Machine Data

More information

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A02

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A02 EMC NetWorker Module for Microsoft Applications Release 2.3 Application Guide P/N 300-011-105 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

Diamond II v2.3 Service Pack 4 Installation Manual

Diamond II v2.3 Service Pack 4 Installation Manual Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance

More information

IBM TSM for Microsoft Office SharePoint Server 2007 Backup and Restore Solution IBM System Storage DS4000 Series & AvePoint DocAve 4.

IBM TSM for Microsoft Office SharePoint Server 2007 Backup and Restore Solution IBM System Storage DS4000 Series & AvePoint DocAve 4. IBM TSM for Microsoft Office SharePoint Server 2007 Backup and Restore Solution IBM System Storage DS4000 Series & AvePoint DocAve 4.1 Document Date: April 24, 2008 Authors: David West i, David Hartman

More information

NTP Software File Auditor for Windows Edition

NTP Software File Auditor for Windows Edition NTP Software File Auditor for Windows Edition An NTP Software Installation Guide Abstract This guide provides a short introduction to installation and initial configuration of NTP Software File Auditor

More information

Veeam Backup Enterprise Manager. Version 7.0

Veeam Backup Enterprise Manager. Version 7.0 Veeam Backup Enterprise Manager Version 7.0 User Guide August, 2013 2013 Veeam Software. All rights reserved. All trademarks are the property of their respective owners. No part of this publication may

More information

Features - Microsoft Data Protection Manager

Features - Microsoft Data Protection Manager Page 1 of 36 Features - Microsoft Data Protection Manager TABLE OF CONTENTS OVERVIEW NEW FEATURES SYSTEM REQUIREMENTS SUPPORTED FEATURES GETTING STARTED - DATA PROTECTION MANAGER DEPLOYMENT GETTING STARTED

More information

ETERNUS VSS Hardware Provider Installation Information

ETERNUS VSS Hardware Provider Installation Information ETERNUS VSS Hardware Provider Installation Information January 2015 Contents About ETERNUS VSS Hardware Provider... 3 Operating System Versions... 4 s... 5 ETERNUS DX60, ETERNUS DX80, ETERNUS DX90... 5

More information

Introduction 1-1 Installing FAS 500 Asset Accounting the First Time 2-1 Installing FAS 500 Asset Accounting: Upgrading from a Prior Version 3-1

Introduction 1-1 Installing FAS 500 Asset Accounting the First Time 2-1 Installing FAS 500 Asset Accounting: Upgrading from a Prior Version 3-1 Contents 1. Introduction 1-1 Supported Operating Environments................ 1-1 System Requirements............................. 1-2 Security Requirements........................ 1-3 Installing Server

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide P/N 302-000-658 REV 01 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA.

More information

EMC NetWorker Module for Microsoft for Exchange Server VSS

EMC NetWorker Module for Microsoft for Exchange Server VSS EMC NetWorker Module for Microsoft for Exchange Server VSS Version 8.2 Service Pack 1 User Guide 302-001-233 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published

More information

INSTALLING MICROSOFT SQL SERVER AND CONFIGURING REPORTING SERVICES

INSTALLING MICROSOFT SQL SERVER AND CONFIGURING REPORTING SERVICES INSTALLING MICROSOFT SQL SERVER AND CONFIGURING REPORTING SERVICES TECHNICAL ARTICLE November 2012. Legal Notice The information in this publication is furnished for information use only, and does not

More information

Backup and Disaster Recovery Restoration Guide

Backup and Disaster Recovery Restoration Guide Backup and Disaster Recovery Restoration Guide Page 1 Table of Contents Table of Contents...2 Terms of Use...3 BDR...4 Creating Point-in-Time Restoration Volumes...4 Mounting a Restoration Volume...4 Dismounting

More information

One Solution for Real-Time Data protection, Disaster Recovery & Migration

One Solution for Real-Time Data protection, Disaster Recovery & Migration One Solution for Real-Time Data protection, Disaster Recovery & Migration Built-in standby virtualisation server Backs up every 15 minutes up to 12 servers On and Off-site Backup User initialed file, folder

More information

LifeSize Control Installation Guide

LifeSize Control Installation Guide LifeSize Control Installation Guide April 2005 Part Number 132-00001-001, Version 1.0 Copyright Notice Copyright 2005 LifeSize Communications. All rights reserved. LifeSize Communications has made every

More information

WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide

WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide This document is intended to help you get started using WebSpy Vantage Ultimate and the Web Module. For more detailed information, please see

More information

Sophos Enterprise Console server to server migration guide. Product version: 5.1 Document date: June 2012

Sophos Enterprise Console server to server migration guide. Product version: 5.1 Document date: June 2012 Sophos Enterprise Console server to server migration guide Product : 5.1 Document date: June 2012 Contents 1 About this guide...3 2 Terminology...4 3 Assumptions...5 4 Prerequisite...6 5 What are the key

More information

Sophos for Microsoft SharePoint startup guide

Sophos for Microsoft SharePoint startup guide Sophos for Microsoft SharePoint startup guide Product version: 2.0 Document date: March 2011 Contents 1 About this guide...3 2 About Sophos for Microsoft SharePoint...3 3 System requirements...3 4 Planning

More information

DocAve 6 Service Pack 1

DocAve 6 Service Pack 1 DocAve 6 Service Pack 1 Installation Guide Revision C Issued September 2012 1 Table of Contents About the Installation Guide... 4 Submitting Documentation Feedback to AvePoint... 4 Before You Begin...

More information

Quick Install Guide. Lumension Endpoint Management and Security Suite 7.1

Quick Install Guide. Lumension Endpoint Management and Security Suite 7.1 Quick Install Guide Lumension Endpoint Management and Security Suite 7.1 Lumension Endpoint Management and Security Suite - 2 - Notices Version Information Lumension Endpoint Management and Security Suite

More information

Quick Start Guide for Parallels Virtuozzo

Quick Start Guide for Parallels Virtuozzo PROPALMS VDI Version 2.1 Quick Start Guide for Parallels Virtuozzo Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the current

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Version 9.0 User Guide 302-001-755 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published

More information

Metalogix Replicator. Quick Start Guide. Publication Date: May 14, 2015

Metalogix Replicator. Quick Start Guide. Publication Date: May 14, 2015 Metalogix Replicator Quick Start Guide Publication Date: May 14, 2015 Copyright Metalogix International GmbH, 2002-2015. All Rights Reserved. This software is protected by copyright law and international

More information

Maintaining the Content Server

Maintaining the Content Server CHAPTER 7 This chapter includes the following Content Server maintenance procedures: Backing Up the Content Server, page 7-1 Restoring Files, page 7-3 Upgrading the Content Server, page 7-5 Shutting Down

More information

3 Setting up Databases on a Microsoft SQL 7.0 Server

3 Setting up Databases on a Microsoft SQL 7.0 Server 3 Setting up Databases on a Microsoft SQL 7.0 Server Overview of the Installation Process To set up GoldMine properly, you must follow a sequence of steps to install GoldMine s program files, and the other

More information