EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

Size: px
Start display at page:

Download "EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution"

Transcription

1 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide P/N REV 01

2 Copyright EMC Corporation. All rights reserved. Published in the USA. Published June, 2014 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. EMC 2, EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries. All other trademarks used herein are the property of their respective owners. For the most up-to-date regulatory document for your product line, go to EMC Online Support (https://support.emc.com). 2 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

3 CONTENTS Preface Revision History Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Overview Bare Metal Recovery overview Terminology How BMR works with NetWorker and NMM Recommendations Bare Metal Recovery Protecting the application data before a disaster Using NetWorker for performing BMR Bare Metal Recovery of Microsoft Active Directory Active Directory Backing up Active Directory for BMR BMR of Active Directory Bare Metal Recovery of Microsoft SQL Server SQL Server 2014, 2012, and 2008 R Backing up SQL Server for BMR by using the VDI technology BMR of SQL Server 2012 or 2008 R SQL Server 2008 and Backing up SQL Server 2008 or 2005 for BMR by using the VSS technology BMR of SQL Server 2008 or Bare Metal Recovery of Microsoft SharePoint Server SharePoint Server 2013 and Backing up SharePoint Server 2013 or 2010 for BMR BMR of SharePoint Server 2013 or SharePoint Server Backing up SharePoint Server 2007 for BMR BMR of SharePoint Server EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide 3

4 Contents Chapter 6 Chapter 7 Chapter 8 Chapter 9 Bare Metal Recovery of Microsoft Exchange Server Exchange Server Backing up Exchange Server 2013 for BMR BMR of Exchange Server Exchange Server Backing up Exchange Server 2010 for BMR BMR of Exchange Server Exchange Server Backing up Exchange Server 2007 for BMR BMR of Exchange Server Bare Metal Recovery of Microsoft Hyper-V Hyper-V Backing up Hyper-V for BMR BMR of Hyper-V Bare Metal Recovery of Microsoft System Center Virtual Machine Manager Overview Virtual Machine Manager server Backing up VMM server for BMR BMR of VMM server Virtual Machine Manager library Backing up VMM library for BMR BMR of VMM library Virtual Machine Manager database Backing up VMM database for BMR BMR of VMM database Virtual Machine Manager environment Protecting data on Hyper-V virtual machines Troubleshooting 4 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

5 PREFACE As part of an effort to improve its product lines, EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use. The product release notes provide the most up-to-date information on product features. Contact your EMC technical support professional if a product does not function properly or does not function as described in this document. Note: This document was accurate at publication time. Go to EMC Online Support (https://support.emc.com) to ensure that you are using the latest version of this document. Purpose Audience Related documentation The purpose of this guide is to provide detailed information about performing Windows Bare Metal Recovery by using EMC NetWorker Module for Microsoft. This guide is part of the EMC NetWorker Module for Microsoft documentation set. It is intended for use by system administrators to perform Windows Bare Metal Recovery of Microsoft applications. Readers should be familiar with the following technologies used in backup and recovery: EMC NetWorker software EMC NetWorker snapshot management Microsoft Volume Shadow Copy Service (VSS) technology Table 1 on page 5 lists the EMC publications that provide additional information. Table 1 EMC publications for additional information (page 1 of 2) Guide names EMC NetWorker Module for Microsoft Release 8.2 Release Notes EMC NetWorker Module for Microsoft Release 8.2 Installation Guide EMC NetWorker Module for Microsoft Release 8.2 Administration Guide EMC NetWorker Module for Microsoft for SQL and SharePoint VSS Release 8.2 User Guide EMC NetWorker Module for Microsoft for SQL VDI Release 8.2 User Guide EMC NetWorker Module for Microsoft for Exchange VSS Release 8.2 User Guide Description Contains information about new features and changes, problems fixed from previous releases, known limitations, and late-breaking information that was not updated in the remaining documentation set. Contains preinstallation, installation, silent installation, and post installation information about NMM 8.2. Contains information common to all the supported Microsoft applications that can be backed up and recovered by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of SQL Server VSS and SharePoint Server VSS by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of SQL Server VDI by using EMC NetWorker Module for Microsoft. Contains information about backup and recovery of Exchange Server VSS by using EMC NetWorker Module for Microsoft. EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide 5

6 Preface Table 1 EMC publications for additional information (page 2 of 2) Guide names EMC NetWorker Module for Microsoft for Hyper-V VSS Release 8.2 User Guide EMC NetWorker Module for Microsoft Release 8.2 Advanced Recovery Guide EMC NetWorker Performing backup and recovery of SharePoint Server by using NetWorker Module for Microsoft SQL VDI solution Release 8.2 Technical Notes Description Contains information about backup and recovery of Hyper-V Server VSS by using EMC NetWorker Module for Microsoft. Provides supplemental information about using NMM for backup and recovery of all supported Microsoft applications. Use this guide along with application-specific user guides for backup and recovery information. Provides information for performing backup and recovery of a SharePoint Server by using the SQL Server Virtual Device Interface (VDI) technology and the SharePoint VSS Writer with NMM. EMC NetWorker Performing Exchange Server Granular Recovery by using NetWorker Module for Microsoft with Ontrack PowerControls Release 8.2 Technical Notes Provides information about using NMM with Ontrack PowerControls to perform granular level recovery (GLR) of deleted Microsoft Exchange Server mailboxes, public folders, and public folder mailboxes. EMC NetWorker SharePoint BLOB Backup and Recovery by using NetWorker Module for Microsoft and Metalogix StoragePoint Release 8.2 Technical Notes EMC NetWorker Cloning Integration Guide EMC NetWorker Licensing Guide EMC NetWorker Online Software Compatibility Guide EMC NetWorker and EMC Data Domain Deduplication Devices Integration Guide EMC NetWorker and EMC Avamar Integration Guide Provides information about backup and recovery of SharePoint Binary Large Objects (BLOB) by using EMC NetWorker Module for Microsoft release 8.2 and Metalogix StoragePoint. Contains planning, practices, and configuration information for using the NetWorker, NMM, and NMDA cloning feature. Contains information about licensing NetWorker and its modules. Provides a list of supported client, server, and storage node operating systems for the following software products: NetWorker and NetWorker application modules and options (including deduplication and virtualization support), AlphaStor, Data Protection Advisor, and HomeBase. Contains planning and configuration information on the use of Data Domain devices for data deduplication backup and storage in a NetWorker environment. Contains planning and configuration information on the use of Avamar in a NetWorker environment. Conventions used in this document EMC uses the following conventions for special notices: NOTICE is used to address practices not related to personal injury. Note: A note presents information that is important, but not hazard-related. 6 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

7 Preface Typographical conventions EMC uses the following type style conventions in this document: Bold Italic Monospace Monospace italic Monospace bold Use for names of interface elements, such as names of windows, dialog boxes, buttons, fields, tab names, key names, and menu paths (what the user specifically selects or clicks) Use for full titles of publications referenced in text Use for: System output, such as an error message or script System code Pathnames, filenames, prompts, and syntax Commands and options Use for variables. Use for user input. [ ] Square brackets enclose optional values Vertical bar indicates alternate selections the bar means or { } Braces enclose content that the user must specify, such as x or y or z... Ellipses indicate nonessential information omitted from the example Where to get help Your comments EMC support, product, and licensing information can be obtained as follows: Product information For documentation, release notes, software updates, or information about EMC products, go to EMC Online Support at: https://support.emc.com Technical support Go to EMC Online Support and click Service Center. You will see several options for contacting EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your EMC sales representative for details about obtaining a valid support agreement or with questions about your account. Online communities Visit EMC Community Network https://community.emc.com/ for peer contacts, conversations, and content on product support and solutions. Interactively engage online with customers, partners, and certified professionals for all EMC products. Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Send your opinions of this document to: EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide 7

8 Preface 8 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

9 REVISION HISTORY your clarifications or suggestions for this document to: The following table presents the revision history of this document. Revision Date Description of added or changed sections 01 June 18, 2014 First release of this document for EMC NetWorker Module for Microsoft release 8.2. EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide 9

10 Revision History 10 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

11 CHAPTER 1 Overview This chapter includes the following sections: Bare Metal Recovery overview Terminology How BMR works with NetWorker and NMM Recommendations Overview 11

12 Overview Bare Metal Recovery overview This guide provides detailed information about Windows Bare Metal Recovery (BMR) solution by using EMC NetWorker and EMC NetWorker Module for Microsoft (NMM), how this solution works, and the procedures that you are required to follow for BMR of the supported Microsoft applications. BMR is a technique in the field of data recovery and restoration where the backed up data is available in a form that allows you to restore a system from bare metal, that is, without any requirements as to previously installed software or operating system. Typically, the backed up data includes the necessary operating system, applications, and data components to rebuild or restore the backed up system to an entirely separate piece of hardware. The hardware receiving the restore should have a similar configuration as that of the hardware that was the source of the backup. The basic BMR is the process of bringing up a server after a disaster and ensuring that the system recovers with the operating system, the applications, and the data as they were at the time of the failure. Restoring a server to the exact configuration that it had at the time of its destruction can be a difficult task. When this restoration is performed to another hardware, it can add to the complexity of the process and can be time-consuming. Windows BMR solution provides a flexible and reliable method of restoring a server after a disaster. Windows BMR support is available on the following platforms: Windows Server 2012 R2 (x64) Windows Server 2012 (x64) Windows Server 2008 SP2 (x86 and x64) Windows Server 2008 R2 SP1 (x64) Windows Server 2008 R2 (x64) Windows Server 2008 (x86 and x64) You can use the BMR support for the following Microsoft applications: Exchange Server 2013 Exchange Server 2010 Exchange Server 2007 SharePoint Server 2013 SharePoint Server 2010 SharePoint Server 2007 Hyper-V Server SQL Server 2014 SQL Server 2012 SQL Server 2008 R2 SQL Server EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

13 Overview SQL Server 2005 Active Directory System Center Virtual Machine Manager The EMC NetWorker Online Software Compatibility Guide that is available on the https://support.emc.com/products/1095/topics/pg41054/ page provides the information about the versions of the supported operating systems, the software and hardware requirements, and the exact versions of the Microsoft applications that Windows BMR supports. For BMR support, you must have installed NetWorker server 7.6 SP3 or later, NetWorker client 8.2, and NetWorker Management Console 8.2 or later along with NMM 8.2. Terminology This section defines terms that are used in this document to describe NetWorker support for Windows BMR. Application data User data such as a log file that is created by the application, or user data such as an application database that is created with the application. For example, an SQL Server s application data includes its databases and log files. Application data is neither included in nor recoverable from a Windows BMR operation. Application data must be backed up and recovered with NMM. ASR Writer The Volume Shadow Copy Service (VSS) writer that is responsible for identifying critical data that is needed to perform an offline restore. Boot Configuration Data (BCD) The BCD store contains boot configuration parameters, and controls how Microsoft Windows Server 2008 operating system starts. A backup of this ASR Writer component is required to perform an offline restore. Critical Volume A critical volume includes: Any volume that contains system state files or files for an installed service, including volumes mounted as NTFS directories that contain such files. An example of an installed service is the Exchange 2010 application binaries. However, the Exchange database and log files are not considered critical. Any parent volume where a critical volume is mounted. All volumes on all dynamic disks if at least one of those volumes is critical. A current backup of all critical volumes that is required to perform a Windows BMR. Disaster recovery The restoration of a computer operating system and its data after a catastrophic failure such as a hard disk failure or the corruption of critical operating system components. A disaster recovery might not be a bare metal recovery. NetWorker Windows BMR image A bootable image that contains NetWorker binaries and a wizard to control the Windows BMR process. Non-critical volume A volume that contains files that are not part of the system state or an installed service. Terminology 13

14 Overview Offline restore A restore operation that is performed from the NetWorker Windows Disaster Recovery boot image. An offline restore is an automated process, and does not require the manual installation of an operating system. A BMR is an offline restore. Online restore A restore operation that is performed from the regular NetWorker recover user interface. An online restore requires that the computer has been booted from an installed operating system. How BMR works with NetWorker and NMM Recommendations From NMM 3.0 onwards, You must perform Windows file system backup and recovery by using the NetWorker client, and application-specific backup and recovery by using NMM. Specific information about how the backup and recovery process for various Microsoft applications in NMM 3.0 differs from previous NMM releases is provided in application-specific user guides. NetWorker disaster recovery provides an automated BMR solution by using the Windows ASR writer and other VSS writers to identify critical volumes that are needed to perform a disaster recovery on a disabled system. BMR is performed offline, that is, when the Windows operating system is inactive. This avoids the necessity to manually reinstall Windows, and the problems that occur when operating system files are being restored to an active Windows system. NMM 8.2 is compatible with the NetWorker 8.2 client, which provides a true BMR capability for Windows Server 2012, Windows Server 2008 R2, and Windows Server This capability is built into the NetWorker client and provides BMR support to the same or similar hardware. For Windows BMR, you should download the appropriate.iso recovery boot image file from EMC Online Support (https://support.emc.com). The ISO image provides a wizard that allows you to format disks, recover Windows critical volumes from backup, and reboot the server to bring it back online. The Obtain the Windows Bare Metal Recovery wizard section in the NetWorker Release 8.2 Administration Guide provides information about how to download the NetWorker Windows BMR image. The NetWorker Release 8.2 Administration Guide provides information about how to use NetWorker for Windows BMR. Review the information in the guide before proceeding with the procedures in this document. The following are the recommendations for performing the Windows BMR recovery: The BMR capability of NetWorker uses supported Microsoft technologies to perform disaster recovery backups and recoveries of Windows clients and servers. Microsoft supports BMR recoveries to the same or similar hardware, and physical to virtual environment. The following Microsoft KB article provides the requirements to perform a BMR to similar hardware: 14 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

15 Overview You can use the NetWorker Windows BMR 32-bit ISO image to recover an x86 operating system on either an x86 or x64 computer. You can use the NetWorker Windows BMR 64-bit ISO image to recover only an x64 operating system on an x64 computer. Review and follow these CPU guidelines: The operating system architecture and the processor architecture must match. The firmware Basic Input/Output System (BIOS) or Unified Extensible Firmware Interface (UEFI) must match. You can treat AMD or Intel processors as being the same if they follow the same architecture. You can recover the operating system backup of an AMD x64 computer to an Intel x64 computer. The process is reversible. You can restore the backup of an x86 operating system version only to an x86 processor computer. You can restore the backup of an x64 operating system version only to an x64 processor computer. Review and follow these hard disk requirements: The disk or RAID drivers that are used in the old system must be compatible with the disk or RAID controllers in the new system. For each critical disk on the BMR target system, the startup hard disk capacity on the new system must be greater than or equal to the capacity on the old system. BMR fails if the capacity is smaller by even a single byte. Windows BMR supports IDE, SATA, or SCSI hard disks. You can perform the backup on one type of hard disk and recover on another type. For example, SAS to SATA is supported. You must restore the backup to the same logical disk numbers as on the original server. You cannot use different logical disk numbers on the target system to recover the critical volumes such as the operating system volume. Ensure that the RAID setup on destination computer does not interfere with the disk order of the hard disks. After a Windows BMR recovery, if you want to use different Network Interface Card (NIC), you must install new NIC drivers that match the NIC in the new computer after Windows boots on the new server. Windows BMR backs up only critical volumes, and can be used for offline disaster recovery. You must use the NetWorker client to back up the non-critical volumes. NetWorker 8.2 considers only system volume as a critical volume. If you have installed a Microsoft application on a drive other than the system drive, the drive is not considered as critical. On Windows Server 2008 R2, a volume is critical if a Microsoft application has installed a Windows service on it, but on Windows Server 2012, a volume that has a Windows application service installed is not critical. Recommendations 15

16 Overview To make a volume critical on Windows Server 2012, set the value of the HKLM\System\CurrentControlSet\Control\SystemWriter\ReportWin32ServicesNonSys temstate registry key to 0. This ensures that BMR includes the Microsoft application binaries, and the volume on which they are installed is marked as critical. Ensure that System Reserved Partition (SRP) is online before you perform a BMR backup. Otherwise, the backup fails and displays the following error message: 84687:save: Unable to get volume information of file system '\\?\Volume{245204f6-5ff7-11e2-a3ac-806e6f6e6963}\': The device is not ready. (Win32 error 0x15). VSS OTHER: ERROR: VSS failed to process snapshot: The shadow copy provider had an unexpected error while trying to process the specified operation. (VSS error 0x f) 90108:save: Unable to save the SYSTEM STATE save sets: cannot create the snapshot :save: Error occured while saving disaster recovery save sets. If SRP is offline, perform the following steps to bring it online: 1. In the WinPE command prompt, type diskpart and press Enter. 2. Run the following command to display the list of volumes: DISKPART> list volume 3. Run the following command to select the volume that is offline: DISKPART> select volume_name 4. Run the following command to bring the selected volume online: DISKPART> online volume 16 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

17 CHAPTER 2 Bare Metal Recovery This chapter includes the following sections: Protecting the application data before a disaster Using NetWorker for performing BMR Bare Metal Recovery 17

18 Bare Metal Recovery Protecting the application data before a disaster To prepare for disaster recovery, back up application data and other files: 1. Use NetWorker client to back up non-application data. The NetWorker Release 8.2 Administration Guide provides details about using NetWorker client to back up the non-application files. 2. Create a NetWorker group without the Snapshot option enabled. 3. Create a NetWorker client resource, and assign it to the group that you created in step Configure the NetWorker client resource by specifying All in the Save set field, and clearing the Backup command and Application information fields. 5. Perform a backup. 6. Use NMM to perform a full backup of application data. The NetWorker Module for Microsoft Release 8.2 application specific user guides provide details about how to perform a full backup. Using NetWorker for performing BMR NetWorker provides a bootable Windows BMR image that contains NetWorker binaries and a wizard to control the disaster recovery process. The Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.2 Administration Guide provides detailed information about how to use the NetWorker Windows BMR image to perform a BMR recovery on protected hosts and VMware virtual machines. For all the Microsoft applications, after performing Windows disaster recovery and restarting the system, check all the disk and volume configurations. In most cases, the disks and volumes appear as on the original system. However, it is possible, especially in BMR scenarios, that the volume or disk signatures do not match the original ones, and the non-critical volumes or disks are offline and not mounted. Use the Microsoft Disk Manager to bring the volumes and disks online, and then restart the system for drive letter reassignments. Assign the same drive letters that existed before the BMR. Non-critical volumes that the mount points access might have a similar issue. 18 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

19 CHAPTER 3 Bare Metal Recovery of Microsoft Active Directory This chapter includes the following section: Active Directory Bare Metal Recovery of Microsoft Active Directory 19

20 Bare Metal Recovery of Microsoft Active Directory Active Directory Backing up Active Directory for BMR This section provides the BMR backup and recovery procedures for Active Directory. Perform the following steps to back up Active Directory for BMR: 1. Create a backup group for Active Directory. a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. 2. Create a client resource for Active Directory, and perform the backup. a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. 3. Right-click the client and select Properties. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. b. On the Apps & Modules tab, ensure that the Backup command and Application information fields are clear. c. Specify other fields according to your requirements. d. Click OK. 4. Perform the backup. 20 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

21 Bare Metal Recovery of Microsoft Active Directory BMR of Active Directory Perform the following steps to perform the BMR of Active Directory: 1. Perform the procedures that the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.2 Administration Guide describes. The Performing post-recovery tasks for Active Directory services section in the NetWorker Release 8.2 Administration Guide provides information about how to perform an authoritative recovery of Active Directory. 2. Verify whether you can successfully log in as the domain administrator. 3. Verify whether all the Active Directory objects are present in both the Active Directory Users and the Computers and Domain Name System management. Active Directory 21

22 Bare Metal Recovery of Microsoft Active Directory 22 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

23 CHAPTER 4 Bare Metal Recovery of Microsoft SQL Server This chapter includes the following sections: SQL Server 2014, 2012, and 2008 R SQL Server 2008 and Bare Metal Recovery of Microsoft SQL Server 23

24 Bare Metal Recovery of Microsoft SQL Server SQL Server 2014, 2012, and 2008 R2 This section provides the BMR backup and recovery procedures for SQL Server 2014, 2012, and 2008 R2 by using the VDI technology in a cluster environment. Backing up SQL Server for BMR by using the VDI technology Configuring an SQL Server client resource You must configure a SQL Server client resource to back up SQL Server for BMR by using the VDI technology. Use one of the following methods to create a client resource: By using the Client Configuration Wizard on page 24 By using the NetWorker Administrator program on page 26 By using the Client Configuration Wizard You should separately create a client resource for backing up the application data and the file system data which includes the DISASTER_RECOVERY: save set. Creating a client resource to back up the application data The By using the Client Configuration Wizard section in the NetWorker Module for Microsoft for SQL VDI Release 8.2 User Guide provides information about how to create a client resource to back up the application data. Creating a client resource to back up the file system data Perform the following steps to create a client resource to back up the file system data: 1. In the Administration window of the NetWorker Management Console, perform one of the following steps: Click Configuration > Client Backup Configuration > New. Right-click the client and from the menu that appears, click Client Backup Configuration > New. 2. On the Specify the Client Name and Type page: a. In the Client name field, specify the name of the client resource. b. Select Traditional NetWorker Client. c. Click Next. The wizard automatically detects the applications on the client that you have specified on the Specify the Client Name and Type page, and displays the list from which you can select the backup type. 3. On the Specify the Backup Configuration Type page: a. From the Available Applications list, select Filesystem. b. Click Next. 24 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

25 Bare Metal Recovery of Microsoft SQL Server 4. On the Specify the Client Backup Options page: a. Select either a NetWorker volume pool or another target pool. If the Target Pool field is blank, the process does not associate the client with any pool. b. Under Deduplication, select one of the following options: None If you have not set up data deduplication. Data Domain backup If you use a Data Domain device for data deduplication. Avamar deduplication backup If you use an Avamar device for data deduplication. After you select this option, choose the Avamar node from the available list. c. Click Next. 5. On the Select Files to Backup page: a. Select the save sets that you want to back up. Selecting the DISASTER_RECOVERY: save set automatically selects the dependent drives for the backup. b. Click Next. 6. On the Select the Client Properties page: a. Select browse policy, retention policy, and backup schedule for the backup from the respective drop-down lists. b. In the Client Comment field, specify a comment for the client resource. c. Click Next. 7. On the Choose the Backup Group page, select one of the following options and click Next: Add to an existing group Select a group from the list. After you select a group, if you use a storage node in the configuration setup, the Specify the Storage Node Options page appears. Create a new group Perform the following steps: In the Group Name field, specify a name for the group. In the Client Retries field, either select or specify 0. In the Scheduled Backup Start Time field, specify the time at which the scheduled backup must start. Select Automatically start the backup at the scheduled time to automatically start the backup at the specified time. SQL Server 2014, 2012, and 2008 R2 25

26 Bare Metal Recovery of Microsoft SQL Server 8. On the Specify the Storage Node Options page: a. Under Backup Storage Nodes, select one of the following options: Backup to NetWorker server only If you do not use a NetWorker storage node. Backup to the following storage nodes If you use a NetWorker storage node. Select the storage nodes. b. Click Next. 9. On the Backup Configuration Summary page, review the details and click Create to create a client resource. The Check Results page appears with the details about the client resource that you have created. 10. To verify the details of the client, select the client and view the Client Properties page in the NMC. By using the NetWorker Administrator program The procedures use the following sample SQL Server configuration: You have installled SQL Server on cluster volume P:\. The cluster quorum drive is E:\. You have clustered all the drives except the C:\ drive in the cluster. The procedures apply to 2014, 2012, 2008, and 2005 versions also, in a cluster environment. Perform the following steps to back up SQL Server for BMR: 1. Create a backup group for SQL Server. a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. 2. Create a client resource to back up the DISASTER_RECOVERY:\ save set on the active node. a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the active node. c. Click OK. 26 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

27 Bare Metal Recovery of Microsoft SQL Server 3. Right-click the client and select Properties. 4. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. b. Specify other fields according to your requirements. c. Click OK. 5. Perform the backup. 6. Perform step 2 and step 5 for the passive node. 7. Create a client resource with Windows cluster name to back up the All save set (quorum drive). a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the Windows cluster. c. Click OK. 8. Right-click the client and select Properties. 9. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. b. Specify other fields according to your requirements. c. Click OK. 10. Perform the backup. 11. Create a client resource with SQL virtual name to back up the All save set (SQL cluster drives). a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the SQL virtual name. c. Click OK. 12. Right-click the client and select Properties. SQL Server 2014, 2012, and 2008 R2 27

28 Bare Metal Recovery of Microsoft SQL Server 13. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify All. b. Specify other fields according to your requirements. c. Click OK. 14. Perform the backup. 15. Create a client resource with SQL virtual name to back up the SQL application data. a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the SQL virtual name. c. Click OK. 16. Right-click the client and select Properties. 17. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify MSSQL: if the SQL instance is either the default instance or a named instance in the cluster. b. Under the Apps & Modules tab, in the Backup command field, specify nsrsqlsv. c. Specify other fields according to your requirements. d. Click OK. 18. Create dummy client resources for the physical nodes of the cluster. 19. Perform the backup. 28 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

29 Bare Metal Recovery of Microsoft SQL Server BMR of SQL Server 2012 or 2008 R2 The BMR process recovers C: drive only. It does not recover the SQL data, the quorum and SQL cluster drives, and the system databases such as master, msdb, and model. Perform the following steps to perform the BMR of SQL Server 2008 R2: 1. Separately recover the active and passive nodes by performing the procedures that the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.2 Administration Guide describes. 2. Recover the cluster quorum database. a. After you have started the active and passive nodes, ensure that the cluster disks are online on the active node in the Disk Management Console of the Windows GUI. b. Add the quorum drive to Failover Cluster Management of the Cluster Configuration UI, as shown in Figure 1 on page 29. Figure 1 Quorum drive configuration in Failover Cluster Management c. Select the Storage node in Failover Cluster Management and ensure that the quorum disk is online as shown in Figure 2 on page 30. SQL Server 2014, 2012, and 2008 R2 29

30 Bare Metal Recovery of Microsoft SQL Server Figure 2 Quorum drive statistics on the Storage page in Failover Cluster Management d. On the SQL Server active node, start the NetWorker User program. e. Click Recover. f. In the Source Client dialog box, select the source client with the Windows cluster name, and click OK. g. In the Destination Client dialog box, select the destination client with the active node name, and click OK. h. Select the quorum drive and recover the drive. 3. Recover the SQL cluster drives. a. Add the SQL drives to Failover Cluster Management of the Cluster Configuration UI, as shown in Figure 3 on page 30. Figure 3 Adding SQL drives to Failover Cluster Management 30 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

31 Bare Metal Recovery of Microsoft SQL Server b. Ensure that the disk is online as shown in Figure 4 on page 31. Figure 4 Viewing disk drive status in Failover Cluster Management c. Configure the drive mount points between the drives so that the mount points are the same as the mount points during the backup. d. On the SQL Server active node, start the NetWorker User program. e. Click Recover. f. In the Source Client dialog box, select the source client with the SQL virtual name and click OK. g. In the Destination Client dialog box, select the destination client with the active node name and click OK. h. Select all the SQL cluster drives and recover the drives. 4. Build the msdb and model databases. a. Start the physical nodes of the cluster. b. Ensure that you have the SQL Server installation software on the active node. c. In the software, go to the folder where the SETUP file exists and run the following command: Setup /QUIET/ACTION=REBUILDDATABASE/INSTANCENAME=<SQL Server instance name>/sqlsysadminaccounts=<domain\administrator username>/iacceptsqlserverlicenseterms SQL Server 2014, 2012, and 2008 R2 31

32 Bare Metal Recovery of Microsoft SQL Server SQL Server 2008 and In the Failover Cluster Management window of the Cluster Configuration UI, perform the following steps: a. Open the SQL Server Properties dialog box. b. On the Dependencies tab, add all the SQL Server dependencies that you must bring online before you bring the SQL Server online. For example, any dependent cluster disk. c. Bring the SQL virtual resources online. d. Bring the SQL Server online. e. Perform the failover and ensure that the failover is successful. To rebuild databases on SQL Server 2012, go to To rebuild databases on SQL Server 2008, go to To rebuild databases on SQL Server 2005, go to 6. Restore the databases by using the NetWorker User for SQL Server program. a. Start the NetWorker User for SQL Server program, and connect to the SQL virtual server instance. b. Browse the backed up databases. c. Select the databases and restore the databases. This section provides the BMR backup and recovery procedures for SQL Server 2008 and 2005 by using the VSS technology in a standalone environment. Backing up SQL Server 2008 or 2005 for BMR by using the VSS technology Configuring a SQL Server client resource You must configure a SQL Server client resource to back up SQL Server for BMR by using the VSS technology. Use one of the following methods to create a client resource: By using the Client Configuration Wizard on page 32 By using the NetWorker Administrator program on page 33 By using the Client Configuration Wizard Perform the procedures that the By using the Client Configuration Wizard on page 24 section describes. 32 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

33 Bare Metal Recovery of Microsoft SQL Server By using the NetWorker Administrator program To back up SQL Server 2008 or 2005 for BMR: 1. Create a backup group for SQL Server 2008 or a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. 2. Create a client resource to back up the DISASTER_RECOVERY:\ save set. a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. 3. Right-click the client and select Properties. 4. In the Client Properties dialog box, perform the following steps: a. On the General tab: In the Group list, select the group that you have created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. b. On the Apps & Modules tab, ensure that the Backup command and Application information fields are clear. c. Specify other fields according to your requirements. d. Click OK. 5. Perform the backup. 6. Perform the All save set backup by using the NetWorker client. 7. For the backup group that you created in step 1, perform the following steps: a. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. b. Select the Snapshot option. c. Select the appropriate Snapshot Policy and Snapshot Pool from the respective lists. d. Specify other fields according to your requirements. e. Click OK. SQL Server 2008 and

34 Bare Metal Recovery of Microsoft SQL Server 8. Create a client resource to back up the APPLICATIONS:\ SqlServerWriter save set. a. Perform step 2 and step 3. The Client Properties dialog box appears. b. On the General tab: In the Group list, select the group that you have created in step 1. In the Save set field, specify APPLICATIONS:\ SqlServerWriter. c. On the Apps & Modules tab: In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify NSR_SNAP_TYPE=VSS. d. Specify other fields according to your requirements. e. Click OK. 9. Perform the backup. BMR of SQL Server 2008 or 2005 The BMR process recovers C: drive only. It does not recover the SQL data, the quorum and SQL cluster drives, and the system databases such as master, msdb, and model. To perform the BMR of SQL Server 2008: 1. Perform the procedures that the Windows Bare Metal Recovery to Physical or Virtual Computers section in the NetWorker Release 8.2 Administration Guide describes. 2. Start the NMM GUI. 3. Select the server and click Recover. 4. Under the APPLICATIONS save set, select SqlServerWriter. 5. Perform the recovery. 6. Ensure that the SQL Server service starts for the recovered instance. 7. To verify whether you have recovered the databases, open SQL Server Management Studio and connect to the instance. The databases that belong to the instance appear. 34 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

35 CHAPTER 5 Bare Metal Recovery of Microsoft SharePoint Server This chapter includes the following sections: SharePoint Server 2013 and SharePoint Server Bare Metal Recovery of Microsoft SharePoint Server 35

36 Bare Metal Recovery of Microsoft SharePoint Server SharePoint Server 2013 and 2010 This section provides the BMR backup and recovery procedures for SharePoint Server 2013 and NMM 8.2 does not support the BMR backup and recovery of SharePoint 2013 and 2010 standalone servers with SQL embedded. Backing up SharePoint Server 2013 or 2010 for BMR Configuring a SharePoint Server client resource You must configure a SharePoint Server client resource to back up SharePoint Server for BMR. Use the NetWorker Administrator program to create a client resource. Table 2 on page 36 provides the sample SharePoint farm configuration that the procedures use. Table 2 Sample SharePoint Server 2010 configuration Components Operating system Application version Critical volume NetWorker build SQL Server Windows Server 2008 R2 SP1 SQL Server 2008 R2 SP1 SQL application is installed on the C: drive. Databases reside on the C: drive. NetWorker 8.2 Web front-end server 1 Windows Server 2008 R2 SP1 SharePoint Server 2010 SP1 SharePoint Server 2010 Application is installed on C: drive. NetWorker 8.2 Web front-end server 2 Windows Server 2008 R2 SP1 SharePoint Server2010 SP1 SharePoint Application is installed on the E: drive. So, the critical volumes are the C: and E: drives. NetWorker 8.2 Backing up SharePoint Server 2010 includes backing up SQL Server, Web front-end server 1, and Web front-end server 2. Backing up SQL Server in a SharePoint Server 2010 environment Perform the following steps to back up SQL Server in a SharePoint environment for BMR: 1. Create the first backup group for the SQL Server. a. In the NetWorker Administrator window, click Configuration > right-click Groups > select New. The Create Group dialog box appears. b. In the Name field, specify the name of the backup group. c. Click OK. You have created the first backup group. d. Right-click the backup group and select Properties. The Group Properties - <backup group name> dialog box appears. e. Do not select the Snapshot option. 36 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

37 Bare Metal Recovery of Microsoft SharePoint Server f. Specify other fields according to your requirements. g. Click OK. 2. Create the first client resource for the SQL Server. a. In the NetWorker Administrator window, click Configuration > right-click Clients > select New. The Create Client dialog box appears. b. In the Name field, specify the name of the client resource. c. Click OK. You have created the first client resource. d. Right-click the client and select Properties. The Client Properties dialog box appears. e. On the General tab: Ensure that you have selected Scheduled backup. In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. f. Specify other fields according to your requirements. g. Click OK. 3. Perform the backup. 4. Create the second backup group for the SQL Server. a. Perform step a through step d of step 1. b. Select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 5. Create the second client resource for the SQL Server. a. Perform step a through step d of step 2. b. On the General tab: Ensure that you have selected Scheduled backup. In the Group list, select the group that you created in step 4. In the Save set field, specify APPLICATIONS:\SqlServerWriter. c. On the Apps & Modules tab: In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify NSR_SNAP_TYPE=vss. d. Specify other fields according to your requirements. e. Click OK. SharePoint Server 2013 and

38 Bare Metal Recovery of Microsoft SharePoint Server 6. Perform the backup. Backing up web front-end server 1 Perform the following steps to perform the BMR backup of web front-end server 1: 1. Create the first backup group for the web front-end server 1. a. Perform step a through step d of step 1 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Do not select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 2. Create the first client resource for the web front-end server 1. a. Perform step a through step d of step 2 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. On the General tab: In the Group list, select the group that you created in step 1. In the Save set field, specify DISASTER_RECOVERY:\. c. Specify other fields according to your requirements. d. Click OK. 3. Perform the backup. 4. Create the second backup group for the web front-end server 1. a. Perform step a through step d of step 1 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. Select the Snapshot option. c. Specify other fields according to your requirements. d. Click OK. 5. Create the second client resource for the web front-end server 1. a. Perform step a through step d of step 2 in Backing up SQL Server in a SharePoint Server 2010 environment on page 36. b. On the General tab: In the Group list, select the group that you created in step 4. In the Save set field, specify APPLICATIONS:\Microsoft Office SharePoint Services. c. On the Apps & Modules tab: In the Backup command field, specify nsrsnap_vss_save. In the Application information field, specify NSR_SNAP_TYPE=vss. d. Specify other fields according to your requirements. e. Click OK. 38 EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 8.2 User Guide

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Release 3.0 User Guide P/N 300-999-671 REV 02 Copyright 2007-2013 EMC Corporation. All rights reserved. Published in the USA.

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Version 8.2 Service Pack 1 User Guide 302-001-235 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published

More information

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution

EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution EMC NetWorker Module for Microsoft for Windows Bare Metal Recovery Solution Version 9.0 User Guide 302-001-755 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published

More information

TECHNICAL NOTES. Technical Notes P/N 300-999-663 REV 01

TECHNICAL NOTES. Technical Notes P/N 300-999-663 REV 01 TECHNICAL NOTES Protecting Virtual Machine Manager Environments by Using EMC NetWorker Module for Microsoft Applications Release 2.4 SP1 Technical Notes P/N 300-999-663 REV 01 January 30, 2013 These technical

More information

Technical Notes. EMC NetWorker Performing Backup and Recovery of SharePoint Server by using NetWorker Module for Microsoft SQL VDI Solution

Technical Notes. EMC NetWorker Performing Backup and Recovery of SharePoint Server by using NetWorker Module for Microsoft SQL VDI Solution EMC NetWorker Performing Backup and Recovery of SharePoint Server by using NetWorker Module for Microsoft SQL VDI Solution Release number 9.0 TECHNICAL NOTES 302-001-760 REV 01 September, 2015 These technical

More information

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A02

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A02 EMC NetWorker Module for Microsoft Applications Release 2.3 Application Guide P/N 300-011-105 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A03

EMC NetWorker Module for Microsoft Applications Release 2.3. Application Guide P/N 300-011-105 REV A03 EMC NetWorker Module for Microsoft Applications Release 2.3 Application Guide P/N 300-011-105 REV A03 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

EMC Avamar 7.0 for Windows Server

EMC Avamar 7.0 for Windows Server EMC Avamar 7.0 for Windows Server User Guide P/N 300-015-229 REV 04 Copyright 2001-2014 EMC Corporation. All rights reserved. Published in the USA. Published May, 2014 EMC believes the information in this

More information

EMC NetWorker Module for Microsoft for SQL and SharePoint VSS

EMC NetWorker Module for Microsoft for SQL and SharePoint VSS EMC NetWorker Module for Microsoft for SQL and SharePoint VSS Release 3.0 SP1 User Guide P/N 302-000-094 REV 03 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA. Published

More information

EMC NetWorker Module for Microsoft for SQL and SharePoint VSS User Guide

EMC NetWorker Module for Microsoft for SQL and SharePoint VSS User Guide EMC NetWorker Module for Microsoft for SQL and SharePoint VSS User Guide Version 8.2 Service Pack 1 User Guide 302-001-231 REV 01 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in

More information

EMC NetWorker Module for Microsoft for Exchange Server VSS

EMC NetWorker Module for Microsoft for Exchange Server VSS EMC NetWorker Module for Microsoft for Exchange Server VSS Version 9.0 User Guide 302-001-753 REV 02 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published October, 2015

More information

EMC NetWorker Module for Microsoft for SQL VDI

EMC NetWorker Module for Microsoft for SQL VDI EMC NetWorker Module for Microsoft for SQL VDI Release 3.0 SP1 User Guide P/N 302-000-095 REV 03 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA. Published February, 2014

More information

Technical Notes TECHNICAL NOTES. Release number 8.2 Service Pack 1 302-001-239 REV 01. January, 2015

Technical Notes TECHNICAL NOTES. Release number 8.2 Service Pack 1 302-001-239 REV 01. January, 2015 EMC NetWorker Module for Microsoft: Exchange Server Granular Level Recovery (GLR) using EMC NetWorker Module for Microsoft with Ontrack PowerControls Release number 8.2 Service Pack 1 TECHNICAL NOTES 302-001-239

More information

EMC NetWorker Module for Microsoft for Hyper-V VSS

EMC NetWorker Module for Microsoft for Hyper-V VSS EMC NetWorker Module for Microsoft for Hyper-V VSS Release 3.0 SP1 User Guide P/N 302-000-097 REV 02 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA. Published January, 2014

More information

EMC NetWorker Module for Microsoft for Exchange Server VSS

EMC NetWorker Module for Microsoft for Exchange Server VSS EMC NetWorker Module for Microsoft for Exchange Server VSS Release 3.0 SP1 User Guide P/N 302-000-096 REV 03 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA. Published February,

More information

EMC Avamar 7.2 for Windows Server

EMC Avamar 7.2 for Windows Server EMC Avamar 7.2 for Windows Server User Guide 301-001-812 REV 02 Copyright 2001-2016 EMC Corporation. All rights reserved. Published in the USA. Published March, 2016 EMC believes the information in this

More information

EMC NetWorker Module for Microsoft Applications

EMC NetWorker Module for Microsoft Applications EMC NetWorker Module for Microsoft Applications Release 2.4 Application Guide P/N 300-012-876 REV 02 Copyright 2007-2012 EMC Corporation. All rights reserved. Published in the USA. Published August 08,

More information

EMC Avamar 7.2 for Windows Server

EMC Avamar 7.2 for Windows Server EMC Avamar 7.2 for Windows Server User Guide 301-001-812 REV 01 Copyright 2001-2015 EMC Corporation. All rights reserved. Published in USA. Published June, 2015 EMC believes the information in this publication

More information

EMC NetWorker Module for Microsoft for Hyper-V VSS

EMC NetWorker Module for Microsoft for Hyper-V VSS EMC NetWorker Module for Microsoft for Hyper-V VSS Version 9.0 User Guide 302-001-754 REV 02 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published October, 2015 EMC believes

More information

EMC NetWorker Module for Microsoft Applications

EMC NetWorker Module for Microsoft Applications EMC NetWorker Module for Microsoft Applications Release 2.4 SP1 Application Guide P/N 300-999-656 REV 02 Copyright 2007-2013 EMC Corporation. All rights reserved. Published in the USA. Published January,

More information

EMC NetWorker Module for Microsoft for Exchange Server VSS

EMC NetWorker Module for Microsoft for Exchange Server VSS EMC NetWorker Module for Microsoft for Exchange Server VSS Version 8.2 Service Pack 1 User Guide 302-001-233 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published

More information

EMC NetWorker Module for Microsoft for SQL VDI

EMC NetWorker Module for Microsoft for SQL VDI EMC NetWorker Module for Microsoft for SQL VDI Version 8.2 Service Pack 1 User Guide 302-001-232 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published January, 2015

More information

EMC NetWorker Module for Microsoft

EMC NetWorker Module for Microsoft EMC NetWorker Module for Microsoft Release 3.0 SP1 Installation Guide P/N 302-000-092 REV 02 Copyright 2007-2014 EMC Corporation. All rights reserved. Published in the USA. Published January 2014 EMC believes

More information

EMC NetWorker Module for Microsoft for Hyper-V VSS

EMC NetWorker Module for Microsoft for Hyper-V VSS EMC NetWorker Module for Microsoft for Hyper-V VSS Version 8.2 Service Pack 1 User Guide 302-001-234 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published January,

More information

EMC NetWorker Module for Microsoft

EMC NetWorker Module for Microsoft EMC NetWorker Module for Microsoft Version 8.2 Service Pack 1 Administration Guide 302-001-230 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published January, 2014

More information

EMC NetWorker Module for Microsoft

EMC NetWorker Module for Microsoft EMC NetWorker Module for Microsoft Version 8.2 Service Pack 1 Installation Guide 302-001-229 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published January, 2015 EMC

More information

EMC NetWorker Module for Microsoft Exchange Server Release 5.1

EMC NetWorker Module for Microsoft Exchange Server Release 5.1 EMC NetWorker Module for Microsoft Exchange Server Release 5.1 Installation Guide P/N 300-004-750 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

EMC NetWorker Module for Microsoft for SQL VDI

EMC NetWorker Module for Microsoft for SQL VDI EMC NetWorker Module for Microsoft for SQL VDI Version 9.0 User Guide 302-001-752 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published September, 2015 EMC believes

More information

Technical Note. Performing Exchange Server Granular Level Recovery by using the EMC Avamar 7.1 Plug-in for Exchange VSS with Ontrack PowerControls

Technical Note. Performing Exchange Server Granular Level Recovery by using the EMC Avamar 7.1 Plug-in for Exchange VSS with Ontrack PowerControls Performing Exchange Server Granular Level Recovery by using the EMC Avamar 7.1 Plug-in for Exchange VSS with Ontrack PowerControls Technical Note 302-001-437 REV 01 December, 2014 This technical note describes

More information

EMC Data Protection Search

EMC Data Protection Search EMC Data Protection Search Version 1.0 Security Configuration Guide 302-001-611 REV 01 Copyright 2014-2015 EMC Corporation. All rights reserved. Published in USA. Published April 20, 2015 EMC believes

More information

EMC Avamar 7.1 for SQL Server

EMC Avamar 7.1 for SQL Server EMC Avamar 7.1 for SQL Server User Guide 302-000-842 REV 03 Copyright 2001-2014 EMC Corporation. All rights reserved. Published in USA. Published December, 2014 EMC believes the information in this publication

More information

EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1

EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 EMC SourceOne for Microsoft SharePoint Storage Management Version 7.1 Installation Guide 302-000-227 REV 01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

WINDOWS SERVER 2008 OFFLINE SYSTEM RECOVERY USING WINDOWS SERVER BACKUP WITH NETWORKER

WINDOWS SERVER 2008 OFFLINE SYSTEM RECOVERY USING WINDOWS SERVER BACKUP WITH NETWORKER TECHNICAL NOTES WINDOWS SERVER 2008 OFFLINE SYSTEM RECOVERY USING WINDOWS SERVER BACKUP WITH NETWORKER NETWORKER RELEASE 7.4 SERVICE PACK 2 AND LATER TECHNICAL NOTE P/N 300-010-339 REV A02 Table of Contents

More information

EMC Replication Manager and Kroll Ontrack PowerControls for Granular Recovery of SharePoint Items

EMC Replication Manager and Kroll Ontrack PowerControls for Granular Recovery of SharePoint Items EMC Replication Manager and Kroll Ontrack PowerControls for Granular Recovery of SharePoint Items Applied Technology Abstract This white paper discusses how Kroll Ontrack PowerControls integrates with

More information

EMC Data Domain Management Center

EMC Data Domain Management Center EMC Data Domain Management Center Version 1.1 Initial Configuration Guide 302-000-071 REV 04 Copyright 2012-2015 EMC Corporation. All rights reserved. Published in USA. Published June, 2015 EMC believes

More information

BackupAssist v6 quickstart guide

BackupAssist v6 quickstart guide Using the new features in BackupAssist v6... 2 VSS application backup (Exchange, SQL, SharePoint)... 2 Backing up VSS applications... 2 Restoring VSS applications... 3 System State backup and restore...

More information

EMC NetWorker Module for Microsoft

EMC NetWorker Module for Microsoft EMC NetWorker Module for Microsoft Version 9.0 Administration Guide 302-001-750 REV 01 Copyright 2007-2015 EMC Corporation. All rights reserved. Published in USA. Published September, 2015 EMC believes

More information

EMC ViPR Controller Add-in for Microsoft System Center Virtual Machine Manager

EMC ViPR Controller Add-in for Microsoft System Center Virtual Machine Manager EMC ViPR Controller Add-in for Microsoft System Center Virtual Machine Manager Version 2.3 Installation and Configuration Guide 302-002-080 01 Copyright 2013-2015 EMC Corporation. All rights reserved.

More information

BackupAssist v6 quickstart guide

BackupAssist v6 quickstart guide New features in BackupAssist v6... 2 VSS application backup (Exchange, SQL, SharePoint)... 3 System State backup... 3 Restore files, applications, System State and mailboxes... 4 Fully cloud ready Internet

More information

EMC NetWorker Module for Microsoft Exchange Server Release 5.1

EMC NetWorker Module for Microsoft Exchange Server Release 5.1 EMC NetWorker Module for Microsoft Exchange Server Release 5.1 Administration Guide P/N 300-004-749 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition Installation Guide P/N 300-003-994 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com

More information

EMC NetWorker. Server Disaster Recovery and Availability Best Practices Guide. Release 8.0 Service Pack 1 P/N 300-999-723 REV 01

EMC NetWorker. Server Disaster Recovery and Availability Best Practices Guide. Release 8.0 Service Pack 1 P/N 300-999-723 REV 01 EMC NetWorker Release 8.0 Service Pack 1 Server Disaster Recovery and Availability Best Practices Guide P/N 300-999-723 REV 01 Copyright 1990-2012 EMC Corporation. All rights reserved. Published in the

More information

EMC HomeBase. Agent Recovery and Migration Guide. Version 6.6 P/N REV 03

EMC HomeBase. Agent Recovery and Migration Guide. Version 6.6 P/N REV 03 EMC HomeBase Version 6.6 Agent Recovery and Migration Guide P/N 300-013-286 REV 03 Copyright 2004-2012 EMC Corporation. All rights reserved. Published in the USA. Published October, 2012 EMC believes the

More information

EMC SourceOne Offline Access

EMC SourceOne Offline Access EMC SourceOne Offline Access Version 7.2 User Guide 302-000-963 REV 01 Copyright 2005-2015 EMC Corporation. All rights reserved. Published April 30, 2015 EMC believes the information in this publication

More information

EMC Avamar 7.2 for IBM DB2

EMC Avamar 7.2 for IBM DB2 EMC Avamar 7.2 for IBM DB2 User Guide 302-001-793 REV 01 Copyright 2001-2015 EMC Corporation. All rights reserved. Published in USA. Published June, 2015 EMC believes the information in this publication

More information

Acronis Backup & Recovery 11.5

Acronis Backup & Recovery 11.5 Acronis Backup & Recovery 11.5 Installation Guide Applies to the following editions: Advanced Server Virtual Edition Advanced Server SBS Edition Advanced Workstation Server for Linux Server for Windows

More information

Administration GUIDE. SharePoint Server idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201

Administration GUIDE. SharePoint Server idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201 Administration GUIDE SharePoint Server idataagent Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 201 Getting Started - SharePoint Server idataagent Overview Deployment Configuration Decision Table

More information

UltraBac Documentation. UBDR Gold. Administrator Guide UBDR Gold v8.0

UltraBac Documentation. UBDR Gold. Administrator Guide UBDR Gold v8.0 UltraBac Documentation UBDR Gold Bare Metal Disaster Recovery Administrator Guide UBDR Gold v8.0 UBDR Administrator Guide UBDR Gold v8.0 The software described in this guide is furnished under a license

More information

EMC NetWorker. Server Disaster Recovery and Availability Best Practices Guide. Version 9.0.x REV 03

EMC NetWorker. Server Disaster Recovery and Availability Best Practices Guide. Version 9.0.x REV 03 EMC NetWorker Version 9.0.x Server Disaster Recovery and Availability Best Practices Guide 302-001-776 REV 03 Copyright 1990-2016 EMC Corporation. All rights reserved. Published in the USA. Published June

More information

Acronis Backup & Recovery 11.5

Acronis Backup & Recovery 11.5 Acronis Backup & Recovery 11.5 Update 2 Installation Guide Applies to the following editions: Advanced Server Server for Windows Virtual Edition Server for Linux Advanced Server SBS Edition Workstation

More information

EMC NetWorker. Licensing Guide. Release 8.0 P/N 300-013-596 REV A01

EMC NetWorker. Licensing Guide. Release 8.0 P/N 300-013-596 REV A01 EMC NetWorker Release 8.0 Licensing Guide P/N 300-013-596 REV A01 Copyright (2011-2012) EMC Corporation. All rights reserved. Published in the USA. Published June, 2012 EMC believes the information in

More information

Technical Note P/N 300-011-099 REV A02 May 07, 2010

Technical Note P/N 300-011-099 REV A02 May 07, 2010 EMC NetWorker Microsoft Exchange 2010 Backup and Recovery Support with EMC NetWorker Technical Note P/N 300-011-099 REV A02 May 07, 2010 This technical note describes the backup and recovery procedure

More information

Hyper-V Cloud Practice Builder. Disaster Recovery Using DPM 2010

Hyper-V Cloud Practice Builder. Disaster Recovery Using DPM 2010 Hyper-V Cloud Practice Builder Disaster Recovery Using DPM 2010 The Hyper-V Cloud Practice Builder from Microsoft Enterprise Services can help Microsoft partners by: Accelerating practice development by

More information

Support Document: Microsoft SQL Server - LiveVault 7.6X

Support Document: Microsoft SQL Server - LiveVault 7.6X Contents Preparing to create a Microsoft SQL backup policy... 2 Adjusting the SQL max worker threads option... 2 Preparing for Log truncation... 3 Best Practices... 3 Microsoft SQL Server 2005, 2008, or

More information

Integrating Data Protection Manager with StorTrends itx

Integrating Data Protection Manager with StorTrends itx Integrating Data Protection Manager with StorTrends itx INTEGRATING DATA PROTECTION MANAGER WITH STORTRENDS ITX 2 1. Introduction 2 2. Test Environment 2 Requirements 2 3. Setting up the Application Servers

More information

Dell NetVault Bare Metal Recovery 10.5. User s Guide

Dell NetVault Bare Metal Recovery 10.5. User s Guide Dell NetVault Bare Metal Recovery 10.5 User s Guide Copyright 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell, the

More information

VMware vsphere Data Protection 6.0

VMware vsphere Data Protection 6.0 VMware vsphere Data Protection 6.0 TECHNICAL OVERVIEW REVISED FEBRUARY 2015 Table of Contents Introduction.... 3 Architectural Overview... 4 Deployment and Configuration.... 5 Backup.... 6 Application

More information

VMware vsphere Data Protection 5.8 TECHNICAL OVERVIEW REVISED AUGUST 2014

VMware vsphere Data Protection 5.8 TECHNICAL OVERVIEW REVISED AUGUST 2014 VMware vsphere Data Protection 5.8 TECHNICAL OVERVIEW REVISED AUGUST 2014 Table of Contents Introduction.... 3 Features and Benefits of vsphere Data Protection... 3 Additional Features and Benefits of

More information

Building Microsoft Windows Server 2012 Clusters on the Dell PowerEdge VRTX

Building Microsoft Windows Server 2012 Clusters on the Dell PowerEdge VRTX Building Microsoft Windows Server 2012 Clusters on the Dell PowerEdge VRTX Startup Guide Paul Marquardt Contents Introduction... 4 Requirements... 4 Chassis setup... 6 Chassis placement and CMC cabling...

More information

Intelligent disaster recovery. Dell DL backup to Disk Appliance powered by Symantec

Intelligent disaster recovery. Dell DL backup to Disk Appliance powered by Symantec Intelligent disaster recovery Dell DL backup to Disk Appliance powered by Symantec The PowerVault DL Backup to Disk Appliance Powered by Symantec Backup Exec offers the industry s only fully integrated

More information

EMC NetWorker. Licensing Process Guide SECOND EDITION P/N 300-007-566 REV A02. EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103

EMC NetWorker. Licensing Process Guide SECOND EDITION P/N 300-007-566 REV A02. EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 EMC NetWorker Licensing Process Guide SECOND EDITION P/N 300-007-566 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2009 EMC Corporation.

More information

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition

EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition EMC NetWorker VSS Client for Microsoft Windows Server 2003 First Edition Administration Guide P/N 300-003-993 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com

More information

VERITAS Backup Exec TM 10.0 for Windows Servers

VERITAS Backup Exec TM 10.0 for Windows Servers VERITAS Backup Exec TM 10.0 for Windows Servers Quick Installation Guide N134418 July 2004 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software

More information

EMC NetWorker Module for Microsoft Applications

EMC NetWorker Module for Microsoft Applications EMC NetWorker Module for Microsoft Applications Release 2.4 Administration Guide P/N 300-012-874 REV 02 Copyright 2007-2012 EMC Corporation. All rights reserved. Published in the USA. Published August

More information

Bare Metal Recovery Quick Start Guide

Bare Metal Recovery Quick Start Guide Bare Metal Recovery Quick Start Guide Revisions Document Control Version 5.4.3 Status Changes Date Final Created. August 2014 Copyright 2003-2014 Intronis, Inc. All rights reserved. 1 Table of Contents

More information

Administration GUIDE. Exchange Database idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233

Administration GUIDE. Exchange Database idataagent. Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233 Administration GUIDE Exchange Database idataagent Published On: 11/19/2013 V10 Service Pack 4A Page 1 of 233 User Guide - Exchange Database idataagent Table of Contents Overview Introduction Key Features

More information

EMC NetWorker Module for Microsoft

EMC NetWorker Module for Microsoft EMC NetWorker Module for Microsoft Version 9.0 Installation Guide 302-001-749 REV 04 Copyright 2009-2015 EMC Corporation. All rights reserved. Published in the USA. Published December, 2015 EMC believes

More information

TECHNICAL NOTES. Technical Notes P/N 302-000-535 REV 02

TECHNICAL NOTES. Technical Notes P/N 302-000-535 REV 02 TECHNICAL NOTES EMC NetWorker Module for Microsoft: Performing Exchange Server Granular Recovery by using EMC NetWorker Module for Microsoft with Ontrack PowerControls Release 3.0 SP1 Technical Notes P/N

More information

Use QNAP NAS for Backup

Use QNAP NAS for Backup Use QNAP NAS for Backup BACKUP EXEC 12.5 WITH QNAP NAS Copyright 2010. QNAP Systems, Inc. All Rights Reserved. V1.0 Document revision history: Date Version Changes Apr 2010 1.0 Initial release Note: Information

More information

SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore

SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore SonicWALL CDP 5.0 Microsoft Exchange InfoStore Backup and Restore Document Scope This solutions document describes how to configure and use the Microsoft Exchange InfoStore Backup and Restore feature in

More information

Metalogix SharePoint Backup. Advanced Installation Guide. Publication Date: August 24, 2015

Metalogix SharePoint Backup. Advanced Installation Guide. Publication Date: August 24, 2015 Metalogix SharePoint Backup Publication Date: August 24, 2015 All Rights Reserved. This software is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this

More information

Silect Software s MP Author

Silect Software s MP Author Silect MP Author for Microsoft System Center Operations Manager Silect Software s MP Author User Guide September 2, 2015 Disclaimer The information in this document is furnished for informational use only,

More information

TABLE OF CONTENTS. Quick Start - Windows File System idataagent. Page 1 of 44 OVERVIEW SYSTEM REQUIREMENTS DEPLOYMENT

TABLE OF CONTENTS. Quick Start - Windows File System idataagent. Page 1 of 44 OVERVIEW SYSTEM REQUIREMENTS DEPLOYMENT Page 1 of 44 Quick Start - Windows File System idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Simplified Data Management Point-In-Time Recovery System State SnapProtect Backup Office Communications

More information

EMC NetWorker Module for Microsoft Applications Release 2.2. Administration Guide P/N 300-008-851 REV A02

EMC NetWorker Module for Microsoft Applications Release 2.2. Administration Guide P/N 300-008-851 REV A02 EMC NetWorker Module for Microsoft Applications Release 2.2 Administration Guide P/N 300-008-851 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

EMC VIPR SRM: VAPP BACKUP AND RESTORE USING EMC NETWORKER

EMC VIPR SRM: VAPP BACKUP AND RESTORE USING EMC NETWORKER EMC VIPR SRM: VAPP BACKUP AND RESTORE USING EMC NETWORKER ABSTRACT This white paper provides a working example of how to back up and restore an EMC ViPR SRM vapp using EMC NetWorker. October 2015 WHITE

More information

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide

VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide VERITAS Backup Exec 9.1 for Windows Servers Quick Installation Guide N109548 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software Corporation makes

More information

Exchange Server Backup and Restore

Exchange Server Backup and Restore WHITEPAPER BackupAssist Version 6 www.backupassist.com Cortex I.T. 2001-2007 2 Contents 1. Introduction... 3 1.1 Overview... 3 1.2 Requirements... 3 1.3 Requirements for remote backup of Exchange 2007...

More information

Best Practices for Installing and Configuring the Hyper-V Role on the LSI CTS2600 Storage System for Windows 2008

Best Practices for Installing and Configuring the Hyper-V Role on the LSI CTS2600 Storage System for Windows 2008 Best Practices Best Practices for Installing and Configuring the Hyper-V Role on the LSI CTS2600 Storage System for Windows 2008 Installation and Configuration Guide 2010 LSI Corporation August 13, 2010

More information

NetVault : Backup. for Exchange Server. User s Guide. Application Plugin Module (APM) version 4.1 MEG-101-4.1-EN-01 10/29/09

NetVault : Backup. for Exchange Server. User s Guide. Application Plugin Module (APM) version 4.1 MEG-101-4.1-EN-01 10/29/09 NetVault : Backup Application Plugin Module (APM) for Exchange Server version 4.1 User s Guide MEG-101-4.1-EN-01 10/29/09 Copyrights NetVault: Backup APM for Exchange Server User s Guide Software Copyright

More information

NETWRIX CHANGE REPORTER SUITE

NETWRIX CHANGE REPORTER SUITE NETWRIX CHANGE REPORTER SUITE QUICK-START GUIDE Product Version: 2.0 November/2011. Legal Notice The information in this publication is furnished for information use only, and does not constitute a commitment

More information

EMC REPLICATION MANAGER AND MICROSOFT SHAREPOINT

EMC REPLICATION MANAGER AND MICROSOFT SHAREPOINT White Paper EMC REPLICATION MANAGER AND MICROSOFT SHAREPOINT A Detailed Review Abstract This white paper offers an in-depth look at how EMC Replication Manager integrates with Microsoft SharePoint. The

More information

EMC Virtual Infrastructure for SAP Enabled by EMC Symmetrix with Auto-provisioning Groups, Symmetrix Management Console, and VMware vcenter Converter

EMC Virtual Infrastructure for SAP Enabled by EMC Symmetrix with Auto-provisioning Groups, Symmetrix Management Console, and VMware vcenter Converter EMC Virtual Infrastructure for SAP Enabled by EMC Symmetrix with Auto-provisioning Groups, VMware vcenter Converter A Detailed Review EMC Information Infrastructure Solutions Abstract This white paper

More information

EMC NetWorker Release 7.6

EMC NetWorker Release 7.6 EMC NetWorker Release 7.6 Disaster Recovery Guide P/N 300-009-446 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright 2009 EMC Corporation. All

More information

Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide

Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide Windows 2000, Windows Server 2003 5.0 11293743 Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide Copyright

More information

Windows Server 2008 R2 Essentials

Windows Server 2008 R2 Essentials Windows Server 2008 R2 Essentials Installation, Deployment and Management 2 First Edition 2010 Payload Media. This ebook is provided for personal use only. Unauthorized use, reproduction and/or distribution

More information

Quick Start - Virtual Server idataagent (Microsoft/Hyper-V)

Quick Start - Virtual Server idataagent (Microsoft/Hyper-V) Page 1 of 19 Quick Start - Virtual Server idataagent (Microsoft/Hyper-V) TABLE OF CONTENTS OVERVIEW Introduction Key Features Complete Virtual Machine Protection Granular Recovery of Virtual Machine Data

More information

VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider

VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider VSS Backup Solution for Exchange Server 2007 and Symantec Backup Exec 12.5 using ETERNUS VSS Hardware Provider System Configuration Guide November 2009 Fujitsu Limited Table of Contents 1. Executive Summary...

More information

Sage HRMS 2014 Sage Employee Self Service Tech Installation Guide for Windows 2003, 2008, and 2012. October 2013

Sage HRMS 2014 Sage Employee Self Service Tech Installation Guide for Windows 2003, 2008, and 2012. October 2013 Sage HRMS 2014 Sage Employee Self Service Tech Installation Guide for Windows 2003, 2008, and 2012 October 2013 This is a publication of Sage Software, Inc. Document version: October 17, 2013 Copyright

More information

User Guide - Exchange Database idataagent

User Guide - Exchange Database idataagent Page 1 of 208 User Guide - Exchange Database idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Customized Features for Your Exchange Version Terminology SYSTEM REQUIREMENTS

More information

EMC NetWorker Snapshot Management for NAS Devices

EMC NetWorker Snapshot Management for NAS Devices EMC NetWorker Snapshot Management for NAS Devices Version 8.2 SP1 Integration Guide 302-001-579 REV 01 Copyright 1990-2015 EMC Corporation. All rights reserved. Published in USA. Published January, 2015

More information

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide

Symantec Backup Exec TM 11d for Windows Servers. Quick Installation Guide Symantec Backup Exec TM 11d for Windows Servers Quick Installation Guide September 2006 Symantec Legal Notice Copyright 2006 Symantec Corporation. All rights reserved. Symantec, Backup Exec, and the Symantec

More information

How to protect, restore and recover SQL 2005 and SQL 2008 Databases

How to protect, restore and recover SQL 2005 and SQL 2008 Databases How to protect, restore and recover SQL 2005 and SQL 2008 Databases Introduction This document discusses steps to set up SQL Server Protection Plans and restore protected databases using our software.

More information

Backup Manager Configuration and Deployment Guide. Version 9.1

Backup Manager Configuration and Deployment Guide. Version 9.1 Backup Manager Configuration and Deployment Guide Version 9.1 Contents Backup Manager 3 Backup Manager Support 9 Backup Manager Configuration and Deployment 14 Defining a Backup Manager Profile 14 Configuring

More information

Release Notes P/N 300-012-130 Rev A01

Release Notes P/N 300-012-130 Rev A01 EMC HomeBase Version 6.5 Release Notes P/N 300-012-130 Rev A01 March 17, 2011 These release notes contain supplemental information about EMC HomeBase Server and Agent Release 6.5. Topics include: Revision

More information

CommVault Simpana Archive 8.0 Integration Guide

CommVault Simpana Archive 8.0 Integration Guide CommVault Simpana Archive 8.0 Integration Guide Data Domain, Inc. 2421 Mission College Boulevard, Santa Clara, CA 95054 866-WE-DDUPE; 408-980-4800 Version 1.0, Revision B September 2, 2009 Copyright 2009

More information

EMC NetWorker Module for Microsoft Applications. Administration Guide. Release 2.3 P/N 300-011-100 REV A02

EMC NetWorker Module for Microsoft Applications. Administration Guide. Release 2.3 P/N 300-011-100 REV A02 EMC NetWorker Module for Microsoft Applications Release 2.3 Administration Guide P/N 300-011-100 REV A02 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com Copyright

More information

Release Notes. LiveVault. Contents. Version 7.65. Revision 0

Release Notes. LiveVault. Contents. Version 7.65. Revision 0 R E L E A S E N O T E S LiveVault Version 7.65 Release Notes Revision 0 This document describes new features and resolved issues for LiveVault 7.65. You can retrieve the latest available product documentation

More information

User Guide - Exchange Public Folder idataagent

User Guide - Exchange Public Folder idataagent Page 1 of 191 User Guide - Exchange Public Folder idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Add-On Components Terminology SYSTEM REQUIREMENTS - EXCHANGE PUBLIC FOLDER IDATAAGENT DEPLOYMENT

More information

TABLE OF CONTENTS. User Guide - Windows File System idataagent. Page 1 of 379 OVERVIEW SYSTEM REQUIREMENTS DEPLOYMENT

TABLE OF CONTENTS. User Guide - Windows File System idataagent. Page 1 of 379 OVERVIEW SYSTEM REQUIREMENTS DEPLOYMENT Page 1 of 379 User Guide - Windows File System idataagent TABLE OF CONTENTS OVERVIEW Introduction Key Features Simplified Data Management Point-In-Time Recovery System State SnapProtect Backup Office Communications

More information

Acronis Backup & Recovery 11

Acronis Backup & Recovery 11 Acronis Backup & Recovery 11 Update 0 Installation Guide Applies to the following editions: Advanced Server Virtual Edition Advanced Server SBS Edition Advanced Workstation Server for Linux Server for

More information