1 ver4.4 page: 1 INSTALLATION GUIDE ANYCONNECT ON WINDOWS WORKSTATIONS This document is the user guide for implementing and configuring the Cisco Anyconnect software client under Windows platform.
2 ver4.4 page: 2 CONTENTS INSTALLATION GUIDE ANYCONNECT ON WINDOWS WORKSTATIONS... 1 CONTENTS INTRODUCTION SOFTWARE DOWNLOAD MOBILE CONNECTIVITY SOFTWARE INSTALLATION IN GENERAL FOR ANY TYPE OF 3G/4G MODEM IN PARTICULAR FOR THE MDT TYPE PANASONIC CF PRE INSTALLATION CHECKS INSTALLATION OF THE CISCO ANYCONNECT SOFTWARE CLIENT CISCO ANYCONNECT PARAMETERS THERE ARE TWO TYPES OF VPN, AND THE CHOICE IS MADE ON THE REQUEST FORM (SEE SUBSCRIPTION REQUEST FORM) RSA-SIG AUTHENTICATION METHOD USING A CERTIFICATE Profile setup Download the certificate Installation of the certificate on machine level Certificate installation on user level Setup the VPN connection EAP-MD5 AUTHENTICATION METHOD USING USERNAME AND PASSWORD Profile setup Setup the VPN connection... 37
3 ver4.4 page: 3 1 INTRODUCTION The Astrid MVNO project will allow all Blue Light services (Police, Fire,...) to access their application using a mobile terminal. Applications are stored in an Astrid Datacenter This document is a user guide for an Astrid MVNO user using a Windows PC device. The prerequisites before implementing and configuring the software are: The setup file for installing Anyconnect The profile xml file to setup the connection with Astrid VPN device If needed the certificate for RSA authentication This procedure was performed and validated in collaborative teams ASTRID and Airbus Defense & Space.
4 ver4.4 page: 4 2 SOFTWARE DOWNLOAD All the files needed for the installation can be downloaded from the site ftp.astrid.be via the internet. Remark: You must use a FTP software like Filezilla to download the files! Don t use your Web browser to do this. The Filezilla client can be downloaded from the internet at: https://filezilla-project.org/ The login and password to access the ftp server can be found in the letter sent to you by ASTRID. You can put all files on a USB-stick to do the installation on MDT or other devices.
5 ver4.4 page: 5 3 MOBILE CONNECTIVITY SOFTWARE INSTALLATION 3.1 In general for any type of 3G/4G modem In order to be able to connect to the mobile network a 3G/4G modem needs to be installed together with its appropriate software. Refer to the installation guide of your connectivity device for proper installation. Setting that need to be adjusted during the installation of the software are: In the profile management tab: - APN: blm.astrid.be - Authentication: CHAP needs to be enabled, and username astrid and password astrid are needed. - If the application requires this information, roaming should be enabled. - Network registration mode should be left on automatic. - In some Vodafone Mobile Broadband clients an Ipv4 number is mandatory, you can just fill in any number, e.g. 22 Check if you are able to connect to the mobile network by pinging and check if you get a response. Congratulations! You are now connected to the ASTRID BLM network. If you have a Clear SIM card, you should be now able to connect to your application(s) or Internet, depending the access right requested for that SIM Card. If you have a VPN SIM card, please proceed to paragraph 4 Installation of the AnyConnect software client.
6 ver4.4 page: In particular for the MDT type PANASONIC CF-19 1) Check if your CF-19 is equipped with a 3G modem. - On the bottom of the device you can find the MODEL NO. With this MODEL NO. Your local reseller should be able to tell you whether your device is equipped with a 3G modem. - If there is a label on the bottom of the device showing an IMEI code, there s is a large chance your device is equipped with a 3G modem. 2) Enable the wireless device by putting the switch located on the left side of the device in the ON position. 3) Put your SIM card into the slot at the back of the device. 4) If the Wireless Wan Manager is not already installed on your computer, download the file: WirelessWANManagerUtil_V _52V_W764_ss11636.exe and install it. (You can download this file from the ftp.astrid.be site, see chapter 2 ) 5) Start the Wireless WAN Manager. 6) The Wireless WAN Manager will detect your SIM card and ask to enter the PIN code.
7 ver4.4 page: 7 7) Once you entered the PIN code you will have to configure the Wireless WAN Manager by going to the Settings pane 8) In the Settings pane, check the Launch Wireless Manager at Windows startup button and click on the Advanced button. 9) If a windows pups up with the message: Foreign network detected, just click on Yes and continue with the setup.
8 ver4.4 page: 8 10) In the advanced setting, go to the Profiles pane, select Manual selection and click on the New button to make a new profile. 11) Give the new profile the name BLM, and assign it the APN name blm.astrid.be. Dummy username and password can be used e.g. test/test as these are not checked by the system. 12) In the Protocols pane select CHAP as authentication protocol and SAVE the profile.
9 ver4.4 page: 9 13) Again in the Advanced settings, select Manual selection, choose the BLM profile, and click on Apply and Close. 14) Now you should be able to connect the ASTRID BLM network. In the connection pane Click on Connect to set up the PDP connection.
10 ver4.4 page: 10 15) The Wireless WAN Manager might ask you again if you want to connect to a foreign network. You can just click on Yes. This is normal due to the fact that ASTRID BLM is a roaming network. 16) If all settings are right, the Wireless WAN Manager should go into Connecting state, and get connected.
11 ver4.4 page: 11 Congratulations! You are now connected to the ASTRID BLM network. If you have a Clear SIM card, you should be now able to connect to your application(s) or Internet, depending the access right requested for that SIM Card. If you have a VPN SIM card, please proceed to paragraph 4 Installation of the AnyConnect software client.
12 ver4.4 page: 12 17) In order to turn off the wireless connection you can use the Wireless ON/OFF switch on the left side of the device.
13 ver4.4 page: 13 4 PRE INSTALLATION CHECKS Before installing the Cisco Anyconnect client, and especially if you re installing on a machine with a FEDPOL image, you should check the following: 1) Your machine is running Windows XP it should have SP3 installed. If not, you can download the file: WindowsXP-KB SP3-x86-ENU.exe and run it. (You can download this file from the ftp.astrid.be site, see chapter 2) 2) Check if the following services are started: -DHCP Client -Wireless Zero Configuration If not, Go to Start -> Setting -> Control Panel. Double click on Administrative Tools and double click on Services. In the Services windows locate the service and double click it. Click on the start button to start the service and change the Startup Type to Automatic. 3) Check if your machine has a Verisign Class 3 Public Primary Certification Authority - G5 certificate. If not, you can download the file PCA-3G5.pem. (You can download this file from the ftp.astrid.be site, see chapter 2) To load the certificate, go to Run and type mmc and run the program. In Console1, go to File and select Add/Remove Snap-in. Click on the Add button. Select Certificates and click on the Add button. Select Computer account and click on the Next button. Select Local computer and click on the Finish button. Close the Add standalone snap-ins: window. Click on the OK button in the Add/Remove Snap in window. In the Console1 window you should have the tree with certificates. Under the Trusted Root Certificates Authorities, right click on Certificates and select All Tasks -> Import. This opens the Certificate import Wizard. Click on Next, browse to the file PCA-3G5.pem (Select All files (*.*) to see the.pem file) and open it. Click on Next. In the Certificate store window where the proposed store is Trusted Root Certificate Authorities just click on Next. Click on Finish. Close the Console1. (Console setting don t need to be saved )
14 ver4.4 page: 14 5 INSTALLATION OF THE CISCO ANYCONNECT SOFTWARE CLIENT The AnyConnect client is available in an install package. The installation package has to be downloaded first. First, you need to download the setup file on your station. The file name is: Anyconnect-win pre-deploy-k9.msi ( you can download this file from the ftp.astrid.be site, see chapter 2) Launch the setup by double clicking on this file. The following display appears, then press Next Accept the term of the license and press Next as described below:
15 ver4.4 page: 15 Then press Install:
16 ver4.4 page: 16 Wait until the setup finish and press Finish The software in now installed.
17 ver4.4 page: 17 6 CISCO ANYCONNECT PARAMETERS There are two types of VPN, and the choice is made on the request form (see subscription request form). The preferred type is based on the installation of a certificate on the workstation (Mobile Data Terminal) which does not require the user to enter credentials when connecting. execute 7.1 hereunder, and skip 7.2 The second type is based on the usage of credential (username + password) which requires the user to enter those credential each time he makes a connection skip 7.1 hereunder, and execute RSA-SIG authentication method using a certificate Profile setup The profile setup can be done by simply copying the profile xml file called: astridcert-sdc.xml into the appropriate directory. (You can download this file from the ftp.astrid.be site, see chapter 2) For Windows XP this directory is: C:\Documents and Settings\All users\application data\cisco\cisco AnyConnect Secure Mobility Client\Profile If this directory is not visible go to My Computer, and select Folder Options under the Tools tab.
18 ver4.4 page: 18 Under the View tab in the Advanced settings the Show hidden files and folders option should be selected. Reboot your PC after copying the file. For Windows 7 this directory is: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile If this directory is not visible click on START and select Computer. Select Organize and click on Folders and search options to open the Folder Option window.
19 ver4.4 page: 19 Select the View tab and click on the show hidden files, folders, and drives option Reboot your PC after copying the file in the correct directory.
20 ver4.4 page: Download the certificate. - Connect your Windows workstation to the mobile network, but do NOT connect with Cisco Anyconnect). - Go to the certificate server: and click on Create Keystore (check if your proxy setting are disabled to access this site! ) - REMARK: This site is only accessible when connected to BLM, it s not accessible from the internet! - In the authentication screen, enter you username and password. - ( the username starts with cer.) Username and password are completed by ASTRID on the subscription form and sent to you by letter.
21 ver4.4 page: 21
22 ver4.4 page: 22 - Click on the OK button to download the certificate - A new window will open with the options OPEN and SAVE: -> SAVE it on your PC (E.g. on your desktop). DO NOT click on OPEN because this will install the certificate in your browser, and that s not what we want! Installation of the certificate on machine level. In order to allow all users on your machine to be able to use the certificate, you need to install the certificate on machine level. ( this chapter ) If you want the certificate to be usable only for your user, go to the next chapter ( ) - go to Run and type mmc and run the program.
23 ver4.4 page: 23 - In Console1 go to File and select Add/Remove Snap-in. - Select Certificates and click on the Add button.
24 ver4.4 page: 24 Select Computer account and click on the Next button. - Select Local computer and click on the Finish button.
25 ver4.4 page: 25 - Close the Add standalone snap-ins: window by clicking on Finish. - In the Console1 window you should have the tree with certificates. - Select the Personal Certificates, go to All tasks and select Import - Follow the wizard and import the.p12 certificate ( The one that was downloaded in chapter 6.2.3) - Remark: you need to change the file settings in order to be able to see the certificate
26 ver4.4 page: 26 Close the Console1 window. ( you don t need to save the Console1 settings).
27 ver4.4 page: Certificate installation on user level Once you have downloaded the certificate file (.p12) or copied the certificate file on your Windows workstation and double click on it. The following screen appears. Click on Next
28 ver4.4 page: 28 Validate the path to the certificate file by press Next
29 ver4.4 page: 29 Enter the certificate password provided by Astrid and press Next Then select the storing place for the certificate by clicking on the Browse button: Store it in the personal directory by selecting Personal and press OK :
30 ver4.4 page: 30 Validate with Next And terminate the installation by pressing Finish
31 ver4.4 page: 31 The certificate import is now done : With this method only your user will be able to use the certificate for the VPN connection. If you want the all users on the workstation to be able to use the VPN connection with certificate, you will have to install the certificate on machine level (see next chapter)
32 ver4.4 page: Setup the VPN connection On your windows screen click on Start and select and launch the Cisco Anyconnect Secure Mobility Client The following Windows appears, click on Connect
33 ver4.4 page: 33 If the destination router sdc-roucdcvpn01.blm.astrid does not appear in the Cisco Anyconnect Secure Mobility Client windows you should re-check the profile setup in 4. In the preference of Cisco Anyconnect you need to uncheck the option Block connections to untrusted servers
34 ver4.4 page: 34 You are now connected to the Astrid Datacenter:
35 6.2 EAP-MD5 authentication method using Username and Password Profile setup ver4.4 page: 35 The profile setup can be done by simply copying the profile xml file called: astrideap-sdc.xml into the appropriate directory. (You can download this file from the ftp.astrid.be site, see chapter 2) For Windows XP this directory is: C:\Documents and Settings\All users\application data\cisco\cisco AnyConnect Secure Mobility Client\Profile If this directory is not visible go to My Computer, and select Folder Options under the Tools tab. Under the View tab in the Advanced settings the Show hidden files and folders option should be selected. Reboot your PC after copying the file.
36 ver4.4 page: 36 For Windows 7 this directory is: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile If this directory is not visible click on START and select Computer. Select Organize and click on Folders and search options to open the Folder Option window. Select the View tab and click on the show hidden files, folders, and drives option
37 ver4.4 page: 37 Reboot your PC after copying the file in the correct directory Setup the VPN connection On your windows screen click on Start and select and launch the Cisco Anyconnect Secure Mobility Client The following Windows appears, click on Connect
38 ver4.4 page: 38 If the destination router sdc-roucdcvpn01.blm.astrid does not appear in the Cisco Anyconnect Secure Mobility Client windows you should re-check the profile setup in 4. In the preference of Cisco Anyconnect you need to uncheck the option Block connections to untrusted servers
39 ver4.4 page: 39 Enter your credentials (username and password) Username and password are sent to you by mail. You are now connected to the Astrid Datacenter:
ver4.3 page: 1 INSTALLATION GUIDE ANYCONNECT ON WINDOWS WORKSTATIONS This document is the user guide for implementing and configuring the Cisco Anyconnect software client under Windows platform. ver4.3
INSTALLATION GUIDE ANYCONNECT ON WINDOWS WORKSTATIONS This document is the user guide for implementing and configuring the Cisco Anyconnect software client under Windows platform. CONTENTS INSTALLATION
INSTALLATION GUIDE ANYCONNECT ON WINDOWS WORKSTATIONSS ver4.2 page: 1 This document is the user guide for implementing andd configuring the Cisco Anyconnect software client under Windows platform. ver4.2
WINXP VPN to ZyWALL Tunneling 1. Setup WINXP VPN 2. Setup ZyWALL VPN This page guides us to setup a VPN connection between the WINXP VPN software and ZyWALL router. There will be several devices we need
Instructions for accessing the new TU wireless Network These instructions are meant for University owned systems directly supported by ENS Computer Services. Users of other systems may find this document
Installing Novell Client Software (Windows 95/98) Platform: Windows 95/98 Level of Difficulty: Intermediate The following procedure describes how to install the Novell Client software. This software allows
DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide This guide will show how to configure a Windows 2000/XP machine to make an IPsec VPN Tunnel connection to a DI-804HV. Below is the example
Xerox Multifunction Devices June 26, 2003 for the user Configuring a Windows 2000 Domain Controller as a Scan Repository Purpose This document describes the procedures to set up a Windows 2000 Domain Controller
APPENDIXC Reference and Troubleshooting: FTP, IIS, and Firewall Information Although Cisco VXC Manager automatically installs and configures everything you need for use with respect to FTP, IIS, and the
IIS, FTP Server and Windows The Objective: To setup, configure and test FTP server. Requirement: Any version of the Windows 2000 Server. FTP Windows s component. Internet Information Services, IIS. Steps:
NSi Mobile Installation Guide Version 6.2 Revision History Version Date 1.0 October 2, 2012 2.0 September 18, 2013 2 CONTENTS TABLE OF CONTENTS PREFACE... 5 Purpose of this Document... 5 Version Compatibility...
Preparing Your Server for an MDsuite Installation Introduction This document is intended for those clients who have purchased the MDsuite Application Server software and will be scheduled for an MDsuite
Quick Setup Guide for 3G/ 4G LTE Super Modem III 1. 3G/ 4G LTE Super Modem III Packing List : Before you start installing the router, please verify that the package contains the following items: One Set
Dial-up Installation for CWOPA Users (Windows Operating System) 1 Table of Contents Download and Install Digital Certificates... 3 Internet Explorer 8/9 Certificate Installation.3 Windows XP Instructions
TECHNICAL PAPER Browser-based Support Console Mass deployment of certificate Netop develops and sells software solutions that enable swift, secure and seamless transfer of video, screens, sounds and data
Upgrading from MSDE to SQL Server 2005 Express Edition with Advanced Services SP2 Installation and Configuration Introduction This document will walk you step by step in removing MSDE and the setup and
SQL Server Setup for Assistant/Pro applications Compliance Information Systems The following document covers the process of setting up the SQL Server databases for the Assistant/PRO software products form
Install the Production Treasury Root Certificate (Vista / Win 7) The Production Treasury Root Certificate should be maintained on your local workstations to use OTCnet Check Capture and Deposit Reporting.
Pearl Echo Installation Checklist Use this checklist to enter critical installation and setup information that will be required to install Pearl Echo in your network. For detailed deployment instructions
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
ADFS Integration Guidelines Version 1.6 updated March 13 th 2014 Table of contents About This Guide 3 Requirements 3 Part 1 Configure Marcombox in the ADFS Environment 4 Part 2 Add Relying Party in ADFS
Windows and MAC User Handbook How to Connect Your PC or MAC Remotely and Securely to Your U.S. Department of Commerce Account Developed for You by the Office of IT Services (OITS)/IT Service Desk *** For
Ricoh Americas Corporation May 2007 TABLE OF CONTENTS 1 INTRODUCTION...3 1.1 Target Audience...3 2 MODEL CROSS REFERENCE...3 3 FTP SERVER SETUP ON WINDOWS 2000...5 3.1 Installing Internet Information Services...5
BBG VPN WINDOWS CLIENT INSTALLATION PROCEDURES Page 1 of 11 Principles and Restrictions VPN Network Access High Speed access via broadband Internet connections is available for the Agency network resources
Remote Drive PC Client software User Guide -Page 1 of 27- PRIVACY, SECURITY AND PROPRIETARY RIGHTS NOTICE: The Remote Drive PC Client software is third party software that you can use to upload your files
UBC Digital Signage Service: CoolSign 5.0 Initial Set- up Guide With the latest release of the CoolSign software (version 5.02) we have changed the way that users connect to the CoolSign Network Manager
Astaro Security Gateway V8 Remote Access via L2TP over IPSec Configuring ASG and Client 1. Introduction This guide contains complementary information on the Administration Guide and the Online Help. If
SafeWord Domain Login Agent Step-by-Step Guide Author Johan Loos Date January 2009 Version 1.0 Contact firstname.lastname@example.org Table of Contents Table of Contents... 2 Why SafeWord Agent for Windows Domains?...
HELP DOCUMENTATION E-SSOM DEPLOYMENT GUIDE Copyright 1998-2013 Tools4ever B.V. All rights reserved. No part of the contents of this user guide may be reproduced or transmitted in any form or by any means
Setting up a Virtual Private Network (VPN) connection Windows 8 A Virtual Private Network (VPN) is best described as a tunnel to MAASnet, the university network. After having configured the VPN connection,
FTP, IIS, and Firewall Reference and Troubleshooting Although Cisco VXC Manager automatically installs and configures everything you need for use with respect to FTP, IIS, and the Windows Firewall, the
. All right reserved. For more information about Specops Deploy and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Deploy is a trademark owned by Specops Software. All
Deploying BitDefender Client Security and BitDefender Windows Server Solutions Quick Install Guide Copyright 2011 BitDefender 1. Installation Overview Thank you for selecting BitDefender Business Solutions
Hardware, Software & System Requirements for SQL Server 2008 R2 Express Edition To get the overview of SQL Server 2008 R2 Express Edition, click here. Please refer links given below for all the details
Step-by-step installation guide for monitoring untrusted servers using Operations Manager ( Part 3 of 3) Manual installation of agents and importing the SCOM certificate to the servers to be monitored:
Vembu OnlineBackup Windows client installation user guide Copyright 2014 Vembu Technologies Inc. All Rights Reserved Vembu OnlineBackup in windows machines is currently supported for below versions (Please
NF5 VOIP Setup Guide (for Generic) Configuring your NF5 for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network Settings:
12/15/2012 WALISYSTEMSINC.COM SETUP SSL IN SHAREPOINT 2013 (USING SELF-SIGNED CERTIFICATE) Setup SSL in SharePoint 2013 In the last article (link below), you learned how to setup SSL in SharePoint 2013
Junos Pulse VPN Client Installation Windows 7 Installation p 2-6 Windows 8.1 Installation p 7-11 Macintosh version 10.6 and greater p 12-17 *This vpn appliance is to replace the Legacy SP vpn client Cisco
Deploying BitDefender Client Security and BitDefender Windows Server Solutions Quick Install Guide Copyright 2010 BitDefender; 1. Installation Overview Thank you for selecting BitDefender Business Solutions
EM L12 Symantec Mobile Management and Managed PKI Hands-On Lab Description Building and Managing a Certficate Authority infrastructure to support your Mobile Management infrastructure can be time consuming
How to Connect SSTP VPN from Windows Server 2008/Vista to Vigor2950 Requirements Windows Server 2008, or Windows Vista SP1 Local Certificate (a online CA server on the Internet is required for some situation
VPN - AnyConnect on Windows Tufts Technology Services Training and Documentation VPN - AnyConnect on Windows 1 Table of Contents AnyConnect on a Windows PC... 3 How Do I Install AnyConnect on a Windows
Avaya one X Portal 1.1.3 Lightweight Directory Access Protocol (LDAP) over Secure Socket Layer (SSL) Configuration This document provides configuration steps for Avaya one X Portal s 1.1.3 communication
Sophos Anti-Virus for NetApp Storage Systems startup guide Runs on Windows 2000 and later Product version: 1 Document date: April 2012 Contents 1 About this guide...3 2 About Sophos Anti-Virus for NetApp
Distributing EmailSMS v2.0 1) Requirements Windows 2000/XP and Outlook 2000, 2002 or 2003, Microsoft.NET Framework v 2).NET Framework V 1 Rollout Microsoft.NET Framework v1 needed to run EmailSMS v2.0.
CREATING AN IKE IPSEC TUNNEL BETWEEN AN INTERNET SECURITY ROUTER AND A WINDOWS 2000/XP PC 1 Introduction Release date: 11/12/2003 This application note details the steps for creating an IKE IPSec VPN tunnel
Installation instructions for the supplier VPN solution We use IPSec/L2TP with EAP (X.509) user authentication. We use IPSec NAT Traversal according to IETF RFC 3193 draft-02. VPN traffic requires that
INSTALLATION INSTRUCTIONS Table of Contents Installation Instructions 1 Table of Contents 1 System Requirements 2 Installation 3 Selecting where to Install the Professional Server 3 Installing Prerequisites
Wavecrest InstallationGuide Wavecrest Certificate www.wavecrest.net Copyright Copyright 1996-2015, Wavecrest Computing, Inc. All rights reserved. Use of this product and this manual is subject to license.
Installation instructions for MERLIN Dashboard Contents Installation Prerequisites:... 2 Procedure to manually backup and restore Views and Settings in AxOEE Manager... 3 For XP users go to:... 3 For Vista
EOS Step-by-Step Setup Guide Wireless File Transmitter FTP Mode Ad Hoc Setup Windows XP 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited. 1
Installing LearningBay Enterprise Part 2 Support Document Copyright 2012 Axiom. All Rights Reserved. Page 1 Please note that this document is one of three that details the process for installing LearningBay
Using Remote Web Workplace Version 1.01 Remote web workplace allows you to access your Windows XP desktop through Small Business Server 2003 from a web browser. 1. Connect to the Internet in your remote
CISCO VPN CLIENT INSTALL AND UPDATE INSTRUCTIONS * If you are installing the VPN client for the first time skip the Uninstall section and start with the Install procedure on page 3. Uninstall: Prior to
APNS Certificate generating and installation Quick Guide for generating and installing an Apple APNS Certificate Version: x.x MobiDM Quick Guide for APNS Certificate Page 1 Index 1. APPLE APNS CERTIFICATE...
Citrix Password Manager Quick Deployment Guide Install and Use Password Manager on Presentation Server in Under Two Hours Citrix Systems, Inc. Notice The information in this publication is subject to change
AirStation VPN Setup Guide WZR-RS-G54 WZR-RS-G54 Introduction The WZR-RS-G54 s VPN services allows users to securely access their home or office network from anywhere in the world. All services available
This guideline shows a typical Windows 7 Professional configuration on a domain network and may not accurately describe your network. If you have problems following it, please consult a competent network
Network Connect Installation and Usage Guide I. Installing the Network Connect Client..2 II. Launching Network Connect from the Desktop.. 9 III. Launching Network Connect Pre-Windows Login 11 IV. Installing
1 Canon WFT-E1 (A) Wireless File Transmitter Network Support Guide Windows XP - Infrastructure Wireless Mode Connection 2 Setting up the WFT-E1A on Windows XP Home or Professional Infrastructure Wireless
Contents Table of Contents Part 1 1... 1 1 Requirements... 3 2 Pre-installation steps... 7 3 Windows Server... 7 Configuring DHCP service on Windows 2008... 12 Configuring Routing on Windows 2008... 18
Launching Applications and Mapping Drives Remote Desktop Outlook Launching Web Applications Full Access VPN Note: To access the Media General VPN, anti-virus software must be installed and running on your
Non-ThinManager Components Microsoft Terminal Servers play an important role in the ThinManager system. It is recommended that you become familiar with the documentation provided by Microsoft about their
NF3ADV VoIP Setup Guide (for TPG) Configuring your NF3ADV for TPG VoIP The following steps will take you through the process of setting up your VoIP connection. This guide assumes that the NF3ADV already
Email client configuration guide Business Email August 2013 Contents 1. Mac Email Clients 1.1 Downloading Microsoft Outlook (Professional Plan Users) 1.2 Configuring Microsoft Outlook (Full Exchange Server
Page 1 of 243 Team Foundation Server 2010, Visual Studio Ultimate 2010, Team Build 2010, & Lab Management Beta 2 Installation Guide (This is an alpha version of Benjamin Day Consulting, Inc. s installation
1. Introduction... 2 2. Remote Access via L2TP over IPSec... 2 2.1. Configuration of the Astaro Security Gateway... 3 2.2. Configuration of the Remote Client...11 2.2.1. Astaro User Portal: Getting Preshared
Getting Started Getting Started MagicConnect is a remote access service that allows you safe remote access to a target device from your remote device. What is a remote device? It is a Windows device, iphone/ipad,
Configure the NETVIGATOR Wireless Modem Make sure that system meets the following requirement prior to NETVIGATOR Wireless Modem usage: - Subscribers who have applied for this service - One or more computers
owncloud Configuration and Usage Guide This guide will assist you with configuring and using YSUʼs Cloud Data storage solution (owncloud). The setup instructions will include how to navigate the web interface,
CWOPA Broadband Users Windows Operating System October 2012 Background These instructions are to be used for VPN users who have been assigned a CWOPA username and password. If your machine has Internet
DESKTOP CLIENT CONFIGURATION GUIDE BUSINESS EMAIL Version 2.0 Updated: March 2011 Contents 1. Mac Email Clients... 3 1.1 Configuring Microsoft Outlook 2011... 3 1.2 Configuring Entourage 2008... 4 1.3.
4cast Client Specification and Installation Version 2015.00 10 November 2014 Innovative Solutions for Education Management www.drakelane.co.uk System requirements The client requires Administrative rights
Setting Up SSL on IIS6 for MEGA Advisor Revised: July 5, 2012 Created: February 1, 2008 Author: Melinda BODROGI CONTENTS Contents... 2 Principle... 3 Requirements... 4 Install the certification authority
Vodafone Text Centre User Guide for Microsoft Outlook 1 Contents Introduction 1 System requirements 2 Installation 3 The installation guide 3 First use 5 Send a message 8 Select recipient 8 Enter the message
RADAR NETWORK SETUP WITH WINDOWS XP/VISTA These instructions are for setting up a Network between RADAR and a PC. To use RADAR s FTP client a 3 rd party FTP Server is needed such as FileZilla Server. This
Bitrix Site Manager ASP.NET Installation Guide Contents Introduction... 4 Chapter 1. Checking for IIS Installation... 5 Chapter 2. Using An Archive File to Install Bitrix Site Manager ASP.NET... 7 Preliminary
Recommended Network Setup Greater Giving Event Software uses Windows File Sharing to allow multiple computers to connect to the same database within your network. This document uses Windows XP as the default
1 Canon WFT-E1 (A) Wireless File Transmitter Network Support Guide Windows XP Direct Cat 5 Cable Connection (Crossover) 2 Setting up the WFT-E1A on Windows XP Home or Professional Direct CAT5 Cable Connection
EOS Step-by-Step Setup Guide Wireless File Transmitter FTP Mode Infrastructure Setup Windows XP 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.
At home On the move Anywhere access Public places In the office With a customer allconnect Setup guide A B C ADSL WiFi Router Setup 4 Huawei 3G USB Dongle Setup 8 Huawei E5 3G Mobile WiFi Setup 12 A. ADSL
Your consent to our cookies if you continue to use this website.