Subsea umbilicals. At the forefront of umbilical technology
|
|
- Kenneth Miles
- 8 years ago
- Views:
Transcription
1 Subsea umbilicals At the forefront of umbilical technology
2 2 Aker Solutions provides subsea umbilicals for production control and power distribution in the world s most challenging environments
3 3 Future trends in umbilicals carry with them great industry challenges. It is that future, and the need for sustained technological development, upon which Aker Solutions is focused. Aker Solutions is at the forefront of deepwater, high pressure umbilical technology and is the leading supplier of steel tube umbilicals worldwide. Over the past 15 years we have delivered more than kilometres (1 988 miles) to some of the world s deepest and most challenging fields. Aker Solutions provides cost effective and technically advanced umbilicals, including: Steel tube umbilicals: from basic direct-hydraulic and electrohydraulic umbilicals to large, integrated service umbilicals Integrated production umbilicals: incorporating actively or passively heated flowline/riser with production control functions Deepwater installation umbilicals: with our carbon fibre technology we can install up to depths of metres (9 842 feet) and below We are capable of handling complex projects with long umbilicals, complicated cross-sections (containing a large number of elements), and termination logistics. With state-of-the-art manufacturing facilities located in Norway and the U.S, Aker Solutions has the technology and capacity to service the umbilical requirements of oil companies, subsea development alliances and installation contractors worldwide. Each Aker Solutions umbilical is custom designed per project specification and our teams take pride in meeting our customers expectations of quality umbilicals delivered on time. Facing industry challenges head on
4 4 custom designed and tuned Smart design solutions The patented Aker Solutions umbilical concept is designed to separate the individual elements within the patented umbilical while bundling them in a continuous helix with low lay-angle. The PVC profiles in the typical Aker Solutions umbilical have a multipurpose functionality: Extremely good protection for impact loads and from sharp edges Correctly spaces and supports the internal elements in the umbilical cross section Absorbs the impact energy efficiently through elastic deformation Prevents build-up of accumulated radial contact force Supports the tubes from bird-caging even on high compression loads Capable of taking high loads in installation tensioner High cross section lay-out flexibility Internal elements move relative to each other at places where bending occurs, resulting in low frictional effects The low helix lay-angle provides: Limited internal radial force generated at high umbilical tension High torsion stability No need for separate armouring system If increased axial stiffness is required due to high strain, additional helix elements of a suitable material are added to the cross section The umbilical is tuned to meet any water depth or environmental condition by adding weight elements or stiffness elements into the cross section. Enhanced deepwater dynamic umbilical Aker Solutions patented carbon fibre rod technology increases umbilical axial stiffness for deepwater applications. This technology is used on both steel tube production control umbilicals as well as power distribution umbilicals. Utilisation of this technology allows for increased strength with little affect on overall weight. This provides benefit in terms of reduced structural reinforcement on the host platform, reduced logistical cost, and increased installability.
5 5 Benefits The benefits Aker Solutions is a market leader in steel tube umbilicals. Advantages: All tubes as well as electrical and fibre optic elements are individually protected and separated by PVC profiles Improved chemical compatibility: super duplex stainless steel is compatible to all commonly used hydraulic fluids and injection chemicals (including methanol) No migration of fluids through the wall of the steel tubing Constant and low tube surface roughness The hydraulic response time and flow resistance will not alter over the years No limit with respect to internal/external line pressure No risk of hose collapse Improved regularity Long continuous umbilical lengths without the need for mid-line joints/splices Fully welded end fittings Excellent corrosion properties of super duplex stainless steel in seawater No separate armouring layers Low weight: weight members may be added if required for seabed stability Improved internal cleanliness Improved crush resistance Technology fit for deep water requirements Standard installation vessels and equipment can be used Deep-draft quay The Aker Solutions manufacturing facilities allow for direct transfer of subsea production control and power distribution umbilicals to the installation vessels. The Moss facility quay offers eight metres (26 feet) draft, and the Mobile, Alabama, facility quay offers 13 metres (42 feet).
6 6 Manufacturing sites Moss, Norway Aker Solutions plant in Moss was commissioned in This state-of-the-art facility is capable of manufacturing large diameter steel tube umbilicals in long, continuous lengths with or without centre lines with an output of kilometres per year. Facilities for storage and load-out equipment are available at the deepwater quayside, with equipment including: Automatic welding lines Certified material laboratory Horizontal bundling machine Extrusion line Eight carousels, tonnes Installation/transportation of reel handling equipment Qualification testing facility Draft at quay approximately eight metres (26 feet) Quay length 140 metres Aker Solutions Moss facility Mobile, Alabama, USA Aker Solutions Mobile facility opened in 2003 and is strategically located to serve the Gulf of Mexico and global markets. The factory, with its high capacity horizontal cabler, has met the challenges of the most aggressive deepwater applications. Aker Solutions Mobile, Alabama facility xxxxxxxxxx xxxxxxx Characteristics: kilometres per year Horizontal bundling machine capable of 21 elements in a single pass Extrusion line and automatic welding Testing facilities which allow for complete system integration testing 13 metre (42 feet) deep-draft quay Complete project management and engineering staff on-site Six carousels, tonnes. Includes one portable carousel for umbilical delivery to remote regions
7 7 Test facilities Aker Solutions two specialist manufacturing facilities are well equipped and staffed. They use state-of-the-art test equipment to ensure that our products meet the high standards of our clients, and of ourselves. Specification: Test equipment to meet complete umbilical qualifications/ verification requirements Crush and bend stiffness testing facilities Full scale and low cycle fatigue testing (with bend stiffeners and bell mouths) High capacity tensile test bench Moss: 30 metre (98 feet) high pull-in test tower on the quay side. The tower has been used for complete umbilical pull-in and hang-off test and can be equipped with a J-tube type pull-in if required Pull-in test rig Aker Solutions pull-in test tower at the Moss facility
8 8 Umbilical products and systems
9 9 Steel tube umbilical Our umbilicals satisfy both basic direct hydraulic as well as electro-hydraulic umbilicals. Hydraulic, chemical and/or service lines Electrical and/or fibre optic cables Pressure rating of psi and above No chemical permeation Long and predictable service life High crush resistance Long continuous manufacturing without transition joints/offshore umbilical connectors The PVC design concept allows for extreme flexibility Carbon fibre may be added to enhance the axial mechanical properties for deepwater service Weight elements may be added to the umbilical allowing the weight to diameter ratio to be tuned for dynamic performance Integrated production umbilical (IPU) The IPU design is based on proven technology, qualified for both static and dynamic application in shallow and deep water. The design is ideal for contributing to a stronger umbilical and a better protected flow line. The IPU solution reduces complexity of the field layout, as well as cost and time in manufacturing and installation. Incorporation of a coated central gas lift or production flowline of 2 to 10 diameter within an overall umbilical design High voltage conductors for heating and flow assurance with fibre optics for temperature monitoring Insulation, PVC, and electro-hydraulic well control functional elements Outer polyethylene sheath Insulating and protective PVC profiles Power distribution umbilical (PDU) Our PDU are suitable for both dynamic and static applications to depths of feet (2 743 metres). Complete dynamic and electrical analysis Patented PVC profile and construction technique for increased impact and crush resistance Patented carbon fibre rod technology used to enhance axial mechanical characteristics Improved stability compared to conventional armoured power umbilicals
10 10 Project experience Our project experience is unrivalled in the marketplace. Since 1993, Aker Solutions has produced over 400 umbilicals, totalling approximately kilometres. Our projects include: Client Project length (kilometres) Number of umbilicals Water depth (metres) Norsk Hydro Troll Oil Kongsberg Offshore Åsgard Satellites Saipem Canyon Express ABB Bonga ExxonMobil/Cameron Kizomba A FMC/Kongsberg Offshore Baobab 19 Yes 1000 ExxonMobil/Cameron Kizomba B BP Rhum Saibos Rosa D+E+WI Talisman Tweedsmuir Kerr McGee Merganser & Ticonderoga, Red Hawk /1525 Anadarko, Dominion Atwater Vally, MC /2900 Murphy/Aker Kikeh Reliance KG-D6 Development Rashid Petroleum Company Rosetta GUPCO/BP Taurt Helix Noonan StatoilHydro Vega Deepest installed umbilical To date, Aker Solutions holds the record for the worlds deepest installed umbilical. Located in the Gulf of Mexico successfully operating in metres (9 000 feet) water depth, our carbon fibre enhanced umbilicals are meeting the increasingly challenging requirements of our industry.
11 11 Aker Solutions provides complete subsea solutions throughout the lifecycle of a development
12 12 Contact Aker Solutions: Headquarters Snarøyveien 36, 1364 Fornebu P.O. Box 94, 1325 Lysaker Norway Tel: Fax: North America 3600 Briarpark drive, Houston Texas USA Tel: Fax: Asia Pacific Level 20, Menara HLA No. 3 Jalan Kia Peng Kuala Lumpur Malaysia Tel: +6 (0) Fax: +6 (0) Africa SONILS OSC Rua 6 - I.L., Boavista, Luanda Angola Tel: Fax: United Kingdom Howe Moss Ave. Kirkhill Industrial Estate, Dyce Aberdeen AB21 0NA UK Tel: +44 (0) Fax: +44 (0) South America Rua da Ajuda, andar, Centro Rio de Janeiro - RJ CEP Brazil Tel: +55 (21) Fax: +55 (21) Australia 4-6 Anderson Place Perth Airport, Western Australia 6105 Tel: +61 (0) Aker Solutions All rights reserved. Photo by Pål Laukli January 2009
Comparison of Steel Tubes and Thermoplastic Hoses in Umbilical Service
Comparison of Steel Tubes and Thermoplastic Hoses in Umbilical Service Users of this Guidance Note should ensure that they are referring to the latest issue which can be downloaded from www.umf.as. No
More informationSubsea Technology. Alain Marion, Senior VP Assets & Subsea Technology. Investor Day in Brazil, October 4, 2011
Subsea Technology Alain Marion, Senior VP Assets & Subsea Technology Investor Day in Brazil, October 4, 2011 Subsea Technology Technip s Commitment to Subsea R&D Technip Leadership Position Emerging Technologies
More informationSetting a Global Standard. www.dril-quip.com. SingleBore Subsea Completion System
Setting a Global Standard www.dril-quip.com SingleBore Subsea Completion System Dril-quip s Vertical Tree Surface Tree Tubing or Drill Pipe Running String Offshore, Time is Money. Dril-quip s SingleBore
More informationTotal Subsea Solutions
Total Subsea Solutions Total Subsea Solutions Developing new energy reserves, managing, and improving producing fields means an unprecedented number of technical challenges. In partnership with our customers,
More informationDesign and manufacture of subsea and topside composite cables and connectors
Overview Design and manufacture of subsea and topside composite cables and connectors Hydro Group. sales@hydrogroup.plc.uk www.hydrogroup-asia.com tel: +65 63343566 fax: +65 63343566 1 : 5 Hydro Group
More informationAGR Consultancy. Worldwide opportunities. Recruitment and consultancy solutions
AGR Consultancy Worldwide opportunities Recruitment and consultancy solutions Remote locations Deepwater Decommissioning 02 Connecting clients and consultants worldwide High pressure high temperature Extended
More informationCompetitive Edge through System Engineering
Competitive Edge through System Engineering KBD Forum 6-7 March 2013 Tore Halvorsen FMC Technologies 0 Floating Production Partial Subsea Processing Subsea Systems today: the enabler for deepwater developments
More informationKodiak Deepwater Project Challenges and Solutions
Kodiak Deepwater Project Challenges and Solutions Marine Technology Society September 24, 2015 Deep Gulf Energy II, LLC Overview of Deep Gulf Energy Companies Deep Gulf Energy Background Exploration and
More informationSPECIALTY FIBER OPTIC CABLE. Downhole Sensing Subsea
SPECIALTY FIBER OPTIC CABLE Specialty Fiber Optic Cable Customers around the world benefit from using AFL fiber optic cable and components for downhole sensing and subsea umbilicals. With its patented
More informationHyper duplex stainless steel for deep subsea applications
Hyper duplex stainless steel for deep subsea applications This article looks at the development of hyper-duplex stainless steels by Sandvik (SAF Sandvik 3207 HD) for use in subsea umbilicals to connect
More informationAGR Consultancy Worldwide opportunities. Recruitment and consultancy solutions
AGR Consultancy Worldwide opportunities Recruitment and consultancy solutions Remote locations Deepwater Decommissioning 02 Connecting clients and consultants worldwide High pressure high temperature Extended
More informationFacilities Flexibras Tubos Flexíveis Ltda
Facilities Flexibras Tubos Flexíveis Ltda A world-class facility for the highest quality flexible pipe to the Brazilian market Technip at a glance Technip is a world leader in project management, engineering
More informationPremium Tubular Solutions Super Duplex Welded Tubes for Umbilical Applications
Premium Tubular Solutions Super Duplex Welded Tubes for Umbilical Applications Premium Tubular Solutions Innovative Tubes for Umbilical Applications Over 35 years of experience in Premium welded t ubular
More informationHow to live with Flexible Pipe, happily ever after?
Copyright: Shell Exploration & Production Ltd. Shell Projects and Technology 16-12-10 KIvI lecture How to live with Flexible Pipe, happily ever after? J. M. M. (Hans) Out 12/22/2010 File Title KIvI Flexible
More informationEffect of Temperature on Wireline Cables Technical Bulletin Ten
The oil and gas industry exposes manufacturers and service companies to some of the most challenging environments anywhere. During wireline operations, cables are routinely run tens of thousands of feet
More informationDRIL-QUIP, INC. OFFSHORE DRILLING AND PRODUCTION EQUIPMENT. www.dril-quip.com
DRIL-QUIP, INC. OFFSHORE DRILLING AND PRODUCTION EQUIPMENT www.dril-quip.com Join an Industry Leader Dril-Quip, Inc. is one of the world s leading manufacturers of offshore drilling and production equipment...
More informationSetting a Global Standard. www.dril-quip.com. HIPPS: High Integrity Pressure Protection System
Setting a Global Standard www.dril-quip.com HIPPS: High Integrity Pressure Protection System HIPPS: High Integrity Pressure Protection System As deeper reservoirs are drilled and discovered offshore, production
More informationRISER SYSTEMS. Our world class innovation solving your riser challenges
RISER SYSTEMS Our world class innovation solving your riser challenges OUR WORLD CLASS INNOVATION SOLVING YOUR RISER contents Riser Analysis 3 Subsea Riser Systems 4 Connectors (Subsea and Surface) Surface
More informationMarine integrity monitoring Offshore oil and gas
Marine integrity monitoring Offshore oil and gas Where will our knowledge take you? BMT has over 0 years experience in the design, procurement, integration and installation of monitoring systems worldwide.
More informationTop Drive Service Loops. Conventional, Enhanced and Superior Solutions for Drilling Applications
Top Drive Service Loops Conventional, Enhanced and Superior Solutions for Drilling Applications Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective,
More informationNSW OFFSHORE AND SPECIAL CABLES. Cables for the future, delivered today.
NSW OFFSHORE AND SPECIAL CABLES. Cables for the future, delivered today. NORDDEUTSCHE SEEKABELWERKE GMBH (NSW) The submarine competence center within the General Cable Group NSW was founded in 1899 by
More informationSubsea School The training program
Subsea School The training program Table of Contents Welcome to the FMC Subsea School... 3 Training Schedules and Participation... 4 SS Subsea Technology Introduction... 5 MPS - Subsea Structures... 6
More informationBundle Pipeline Systems & Shell FRAM Development Iain Watson & Peter Walker
Bundle Pipeline Systems & Shell FRAM Development Iain Watson & Peter Walker March 21 st, 2012 27.1.11 Page 1 Agenda Bundle Technologies Advantages of Bundle Systems Shell Fram Bundle FEED 27.1.11 Page
More informationFacilities Asiaflex Products
Facilities Asiaflex Products The first flexible pipe and umbilical manufacturing facility in Asia Technip profile A world leader in engineering, project management and technologies, serving the energy
More informationSubsea Engineering Days 2015
Subsea Engineering Days 2015 London 20-22 October 2015 Value propositions and contact information 4 Subsea (Only for Premier Oil, Genesis & BP) Nils Gunnar Viko - Vice President, Flexible Pipe Technology
More informationAsset Management Conformity Assessment Fitness for Service QHSE. Oil & Gas Services and Tools. For the benefit of business and people
Asset Management Conformity Assessment Fitness for Service QHSE Oil & Gas Services and Tools For the benefit of business and people Services along the whole life of Facilities Bureau Veritas services can
More informationNon-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
More informationSubsea Asset Monitoring using Distributed Fiber Optic Sensing
Subsea Asset Monitoring using Distributed Fiber Optic Sensing Carlos Borda Omnisens S.A. Subsea Asia Conference June 2014 Agenda Who is Omnisens? Distributed Fiber Optic Monitoring Power Umbilicals Flow
More informationCameron s Process Systems. The Industry s Total Solutions Provider
Cameron s Process Systems The Industry s Total Solutions Provider TOTAL SOLUTIONS PROVIDER As the industry s total solutions provider, Cameron provides comprehensive solutions that extend from concept
More informationEQUIPMENT HIRE SERVICES. Preparedness through customised and cost effective oil spill response equipment solutions
EQUIPMENT HIRE SERVICES Preparedness through customised and cost effective oil spill response equipment solutions EQUIPMENT HIRE SERVICES TO BE FULLY PREPARED MEANS TO BE READY TO RESPOND AT ANY TIME OSRL
More informationSystem. Stability. Security. Integrity. 150 Helical Anchor
Model 150 HELICAL ANCHOR System PN #MBHAT Stability. Security. Integrity. 150 Helical Anchor System About Foundation Supportworks is a network of the most experienced and knowledgeable foundation repair
More informationSubsea Drilling Systems
Subsea Drilling Systems 2 Reliable, cost-effective solutions for offshore drilling... FMC Technologies Subsea Drilling Systems lead the industry with reliable and cost-effective drilling solutions which
More informationThird quarter results 2012
Q3 Third quarter results 2012 Fornebu, Øyvind Eriksen and Leif Borge 2012 Aker Solutions Slide 1 Agenda Q3 2012 Introduction Øyvind Eriksen Executive chairman Financials Leif Borge President & CFO Q&A
More informationSeawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D.
OSNA -10 Copper-Nickel Lined Pipes Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D. KME Germany AG & Co. KG Copper-Nickel Lined Pipes [GB] Member of the KME Group
More informationDelivering Riser Engineering and Software Solutions
Delivering Riser Engineering and Software Solutions Experience that Delivers 03 04/05 06/07 08 09 10 MCS Kenny An introduction to MCS Kenny Engineering services Our capabilities and experience Case studies
More informationAAF Manufacturing Services. Leading the way in engineering excellence
AAF Manufacturing Services Leading the way in engineering excellence Contents Introduction Parts Manufacture Weld Assembly Surface Protection Mechanical & Electrical Final Assembly service agreements Introduction
More informationSUBSEA CONNECTORS FOR MARINE RENEWABLE ENERGY APPLICATIONS
SUBSEA CONNECTORS FOR MARINE RENEWABLE ENERGY APPLICATIONS This was the initial perception since proved incorrect! THE ENVIRONMENT IS FAR MORE SEVERE THAN DEEPER WATERS SEABED CONDITIONS often no possibility
More informationStainless steel cable fixing solutions for critical environments
Stainless steel cable fixing solutions for critical environments BAND-IT-IDEX is the world s leading manufacturer in quality clamping and banding systems. Since its inception in 1937, BAND-IT bands and
More informationLife-of-Field. seabed-to-surface
Life-of-Field seabed-to-surface Global capabilities Life-of-Field {LOF} definition: Assurance of asset integrity throughout the operational life cycle, enabled by a suite of services including integrity
More informationroxar global services
roxar global services Roxar is a world class provider of customer services. We believe in helping you get maximum value from the technology solutions we deliver and enhancing your customer experience.
More informationElectric heat tracing
PIPELINE DESIGN Figure 1. Shorter, more complex piping at a process plant. Electric heat tracing Neil Malone, Heat Trace, UK, discusses electric heat tracing of long pipelines. In considering electric
More informationDERIVING ANALYTICAL AXISYMMETRIC CROSS SECTION ANALYSIS AND COMPARING WITH FEM SIMULATIONS
DERIING ANALYTICAL AXISYMMETRIC CROSS SECTION ANALYSIS AND COMPARING WITH FEM SIMULATIONS Magnus Komperød Technological Analyses Centre Nexans Norway AS P O Box 42, 75 HALDEN Norway ABSTRACT Direct electrical
More informationSetting a Global Standard. www.dril-quip.com. SDX BOP Stack Subsea Wellhead Connectors
Setting a Global Standard www.dril-quip.com SDX BOP Stack Subsea Wellhead Connectors Features Dril-Quip s DX BOP Stack Subsea Connectors are an excellent choice to safely meet the everchanging requirements
More informationPowering Today and Tomorrow. Energy Solutions
Powering Today and Tomorrow Energy Solutions Panduit s Unified Physical Infrastructure (UPI) A unified approach to physical and logical systems architecture is imperative for solutions to fully address
More informationCable Installation Notes
Cable Installation Notes June 2006 Table of Contents Cable Pulling... 2 Bending Radius... 2 Pulling Tension... 3 Friction... 3 Installation with Rollers... 4 Installation without Rollers... 4 Pulling Tension
More informationInstallation Workover Control Systems (IWOCS)
Oceaneering developed an Installation Workover Control System (IWOCS) in 1990 for use with a mudline tree. Now, Oceaneering offers a large fleet of leased IWOCS designed for all types of installations
More informationCorporate Profile ROYAL. MODERN ROYAL ELECTRIC Ideal Power Solution MRE ELECTRICAL, INSTRUMENTATION & COMMUNICATION SYSTEMS
Corporate Profile MODERN ROYAL ELECTRIC Ideal Power Solution ROYAL MRE ELECTRICAL, INSTRUMENTATION & COMMUNICATION SYSTEMS MAJOR STOCKIST >>> CATHODIC PROTECTION CABLES >>> LOW VOLTAGE CABLES >>> MEDIUM
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More information)454, !,5-).)5- #!",% 3(%!4(3 #/.3425#4)/. ).34!,,!4)/.!.$ 02/4%#4)/. /& #!",%3!.$ /4(%2 %,%-%.43 /& /543)$% 0,!.43. )454 Recommendation,
INTERNATIONAL TELECOMMUNICATION UNION )454, TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU #/.3425#4)/. ).34!,,!4)/.!.$ 02/4%#4)/. /& #!",%3!.$ /4(%2 %,%-%.43 /& /543)$% 0,!.43!,5-).)5- #!",% 3(%!4(3
More informationWorld Leader of Subsea Systems
Subsea Systems World Leader of Subsea Systems FMC Technologies is a leading global provider of subsea production and processing systems to the offshore industry. We partner with our customers to develop
More informationThe original heating cable just got better
The making of the DEVIflex heating cable IEC 60800:2009 approved PVC outer sheath Install down to -5 C Round construction 360 full screening The original heating cable just got better DEVIflex Strong.
More informationSteel construction. Solutions for the renewable energy and offshore sectors. published by energyengineering magazine
Steel construction Solutions for the renewable energy and offshore sectors published by energyengineering magazine SCI-Energy-Supplement.indd 1 25/10/2010 13:00:22 Introduction SCI is a world leader in
More informationThe Suitability of CRA Lined Pipes for Flowlines Susceptible to Lateral Buckling SUT Global Pipeline Buckling Symposium, 23 24 February 2011
The Suitability of CRA Lined Pipes for Flowlines Susceptible to Lateral Buckling SUT Global Pipeline Buckling Symposium, 23 24 February 2011 Duncan Wilmot, Technical Manager, Cladtek International, Australia
More informationElastoFlake & ElastoTec
ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed
More informationImplosive Connectors. for overhead transmission lines
Implosive Connectors Implosive Connectors for overhead transmission lines VP metall is situated in Raufoss Industrial Park, where you find the leading know-how in metallurgy and machining technology in
More informationHV Submarine Cable Systems Design, Testing and Installation
HV Submarine Cable Systems Design, Testing and Installation CIGRE Ireland Technical Seminar 6 th October 2010 Robert Donaghy Senior Consultant Engineer, ESB International Presentation Overview Applications
More informationMODELING THE EFFECT OF TEMPERATURE AND FREQUENCY ON BITUMEN-COATED HELICAL CABLE ELEMENTS
MODELING THE EFFECT OF TEMPERATURE AND FREQUENCY ON BITUMEN-COATED HELICAL CABLE ELEMENTS Bjørn Konradsen 1 Technological Analyses Centre, Hybrid Underwater Cables, Nexans Norway Steinar V. Ouren Material
More informationSubsea wellhead systems. Advanced solutions for extreme conditions
Subsea wellhead systems Advanced solutions for extreme conditions Subsea wellhead systems As offshore drilling pushes past 10,000-foot water depths and 30,000- foot wells, pressure increases exponentially
More informationDIVERSIFICATION INTEGRITY MARKETS SERVED BUILT ON BUILT ON
BUILT ON DIVERSIFICATION Saulsbury Industries is a full-service Engineering, Procurement and Construction (EPC) contractor that has provided engineering, general construction, and electrical and maintenance
More informationFeasibility Study of Deep Water Power Cable Systems. Enrico Colombo CESI S.p.A
Feasibility Study of Deep Water Power Cable Systems Enrico Colombo CESI S.p.A Layout of Presentation The Study Context, Objectives, Participants Study Approach & Methodology Assessments and Findings Implementation
More informationUGVCL/SP/591/11KV HT AB CABLE
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched
More informationComposite Drill Pipe Perfect Fit for Short-Radius Drilling
American Oil & Gas Reporter Article Composite Drill Pipe Perfect Fit for Short-Radius Drilling With much of the nation's "easy-to-produce" oil and gas gone, many U.S. companies are looking for lower cost
More informationLanguages: : French (Mother tongue), English (Fluent), Portuguese (Basic Level)
curriculum vitae Name: : Jeremy de BARBARIN Position: : Engineering Manager Date/Place of Birth: : 14 th of June 1973 in Marseille (France) Nationality: : French Languages: : French (Mother tongue), English
More informationCollapse of Underground Storm Water Detention System
Collapse of Underground Storm Water Detention System No. 16 March 2008 Shopping malls have large roof areas and large paved areas for parking. In many cases, during heavy rainfall, the drainage from these
More informationEngineering and technologies Umbilical Systems
Engineering and technologies Umbilical Systems Customised umbilical systems for the global offshore oil and gas market Technip profile A world leader in engineering, project management and technologies,
More informationEnergy & Data Transmission Systems for Waste Water Treatment
Energy & Data Transmission Systems for Waste Water Treatment Conductix-Wampfler Solutions for Waste Water Treatment 2 Conductix-Wampfler We move your business! Solutions for Waste Water Treatment Reliable
More informationSubsea Integrity and Efficiency Conference. Securing and Enhancing UK Brownfield Production from Subsea Control Systems. Alan Peek - 01 Dec 2015
Subsea Integrity and Efficiency Conference Securing and Enhancing UK Brownfield Production from Subsea Control Systems Alan Peek - 01 Dec 2015 1 Introduction The Challenge For Us All Low oil price and
More informationDOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS)
DOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS) Double Jelly Filled Stainless Steel Tube General Description This document specifies non armour sensing fiber cable with double stainless
More informationOffshore Wind China 2010 Bergen, 15th March 2010. Olivier Angoulevant Nexans Norway AS
Offshore Wind China 2010 Bergen, 15th March 2010 Olivier Angoulevant Nexans Norway AS At the core of performance At the core of performance : a worldwide leader Worldwide leader in cables, cabling systems
More informationNetwork Standard Advice No. 1420C 9/6/2011
Network Standard Advice No. 1420C 9/6/2011 TO: Customers, Service Providers and Ausgrid Staff. Advisory Note on Changes to the Use of 11kV Cable Types. Introduction This Network Standard Advice (NSA) provides
More informationSeabed Geosolutions Company Profile
Seabed Geosolutions Company Profile Visit us seabed-geo.com Delivering the Most Versatile Seabed Solutions 02 Resolving Operational and Geophysical Challenges 04 Why Seabed Acquisition 06 QHSE 07 Global
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationCompany and Product Presentation
Company and Product Presentation Company Presentation NBG Systems & FCT are private companies owned by NBG Holding Both are Austrian companies, operating under the highest European Union requirements &
More informationR&D Services Knowledge transfer
R&D Services Knowledge transfer Training Offer - November 2009 OCAS : a joint venture between ArcelorMittal and the Flemish Region R&D Knowledge transfer - Scope Market-oriented knowledge transfer in the
More informationTotal Service Solutions
Total Service Solutions Bridon On-Site Services BRIDON On-Site Services provide expert operational support to help you get the optimum performance from your ropes. Our highly competent rope technicians
More informationWhitepaper. Modular Substation Cable Termination Design. Author: Allan Bozek P.Eng, MBA, EngWorks Inc, Calgary, Canada
Whitepaper Modular Substation Cable Termination Design Author: Allan Bozek P.Eng, MBA, EngWorks Inc, Calgary, Canada Abstract The methods for cable penetrations into modular industrial substations are
More informationFlexible Steel Pipe Applications
Flexible Steel Pipe Applications Dana Fraser 1 REFERENCE: Dana Fraser, Flexible Steel Pipe Applications, Fourth International Conference On Composite Materials For Offshore Operations. Houston, TX, October
More informationOTC OTC-21588-PP. Copyright 2011, Offshore Technology Conference
OTC OTC-21588-PP SS: Deployment of Subsea Equipment: Qualification of Large Diameter Fibre Rope for Deepwater Construction Applications R. Törnqvist; and M. Strande, DNV; D. Cannell, Technip; P. Gledhill,
More informationRemote Power Systems
Remote Power Systems Remote Power Systems Customized Power Solutions Orga s photovoltaic and battery backup systems can be found on offshore platforms and onshore remote sites all around the world when
More informationMERMAID FLEET PROFILE SUBSEA SERVICES
010 Mermaid Maritime Public Company Limited MERMAID ENDURER (Built in 2010) The DSV Mermaid Endurer is a Norwegian purpose-built DP2 dive support and light construction vessel, specially designed for operations
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationRelining of Water Mains with. Flexible High Pressure Pipelines. Raedlinger Primus Line, Inc. Ivan Zubiaga Executive Vice President 2014
Relining of Water Mains with Flexible High Pressure Pipelines Raedlinger Primus Line, Inc. Ivan Zubiaga Executive Vice President 2014 Aging water main infrastructure The American Society of Civil Engineers
More informationFIBER-OPTIC SENSING TECHNOLOGIES
PRODUCTION ENHANCEMENT FIBER-OPTIC SENSING TECHNOLOGIES FOR WELL MONITORING TO RESERVOIR MANAGEMENT Solving challenges. A H A L L I B U R T O N S E R V I C E Fiber-Optic Sensing Technologies CUTTING-EDGE
More informationStrengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning. May 7th 2013: Dominique Deschamps
Strengthening of Large Storage Tank Foundation Walls in an Aggressive Environment by External Post-tensioning May 7th 2013: Dominique Deschamps Scope of the paper Presentation of the project Cause of cracks
More informationcreating progress for the future
CREATING PROGRESS OFFSHORE creating progress for the future CREATING PROGRESS SCANAOFFSHORE Scana Offshore group of companies will be present at the OTD in Stavanger, October 23-24 2013. The companies
More informationCable ladder installation at S.C.M. Chemicals Limited s titanium dioxide Plant in Western Australia
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables.
More informationCUSTOMER UNIQUE CABLE INNOVATIONS WE PROVIDE THE FISH FARM MARKET WITH. Bremnes Seashore. 450 kv. 400 kv. 350 kv. 300 kv. 250 kv. 200 kv.
450 kv 400 kv 350 kv 300 kv 250 kv 200 kv 150 kv 100 kv 50 kv 40 kv Bremnes Seashore 30 kv 20 kv 10 kv 1 kv WE PROVIDE THE FISH FARM MARKET WITH CUSTOMER UNIQUE CABLE INNOVATIONS WE ARE A LEADING MANUFACTURER
More informationALARMLINE ANALOGUE Linear Heat Detection System
ALARMLINE ANALOGUE Alarmline Analogue sensor cable senses temperature variations by continuously monitoring the resistance of specially doped N.T.C. polymeric insulation. A change in temperature produces
More informationAn Introduction to Oil and Gas Well Servicing
An Introduction to Oil and Gas Well Servicing Educational Material from the IOM 3 Oil and Gas Division The global network for the materials cycle Introduction The Institute of Materials, Minerals & Mining
More informationPump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
More informationThe Advance of New ROV Conveyed Geotechnical Acquisition Tools - Going Where No Man Has Gone Before. Subsea UK Expo February 2014
The Advance of New ROV Conveyed Geotechnical Acquisition Tools - Going Where No Man Has Gone Before Subsea UK Expo February 2014 UTEC Geomarine Snapshot Founded Newcastle 2009 Subsea geotechnical engineering
More informationEngineering Software Enables Designing for the Deep
An Industry White Paper By Kevin Gomez, Editor PACE Magazine, Cirrus Media, Australia The content of this paper originally appeared in PACE Magazine, February 26, 2013. www.pacetoday.com.au Overview What
More informationDOUBLE DRUM TRACTION WINCH SYSTEMS FOR OCEANOGRAPHIC RESEARCH 1.0 TRACTION WINCH SYSTEM ADVANTAGES 11-2
Chapter 11 DOUBLE DRUM TRACTION WINCH SYSTEMS FOR OCEANOGRAPHIC RESEARCH James Stasny 1.0 TRACTION WINCH SYSTEM ADVANTAGES 11-2 2.0 THEORY OF OPERATION 11-3 3.0 ADVANTAGES IN TRACTION WINCH SYSTEM DESIGN/
More informationGraduate Engineer Development Scheme (GEDS)
Graduate Engineer Development Scheme (GEDS) Aberdeen seabed-to-surface Contents 1 Aberdeen Graduate Engineer Development Scheme (GEDS) 2 What we are looking for 6 Support 8 On the job development 9 Offshore
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 13 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ELECTIRAL GROUNDING TABLE OF CONTENT
More informationTRENCHLESS TECHNOLOGY GUIDELINES CLOSE FIT THERMOPLASTIC LINING
TRENCHLESS TECHNOLOGIES RESOURCE CENTRE TRENCHLESS TECHNOLOGY GUIDELINES SECOND EDITION CLOSE FIT THERMOPLASTIC LINING NEW VERSION AUGUST 2005 1. OVERVIEW The use of liners that are deliberately deformed
More informationEUROLAB 25 years. The role of metrology and testing to characterize materials and products. EUROLAB 25th Anniversary Seminar
EUROLAB 25 years The role of metrology and testing to characterize materials and products April 9, 2015, Odense Danmark 1 Origin of Conformity Assessment The New Approach for the European Economic Community
More informationEngineered, Time-Tested Foundation Repairs for Settlement in Residential and Light Commercial Structures. The Leading Edge.
TM TM Engineered, Time-Tested Foundation Repairs for Settlement in Residential and Light Commercial Structures. SM The Leading Edge. 10 One Major Causes of foundation settlement or more conditions may
More information