Module Listing for PhD & Meng
|
|
- Branden Morris
- 7 years ago
- Views:
Transcription
1 Module Listing for PhD & Meng Update: 02/06/2014 The workload for the modules is displayed in an A-B-C-D-E format A - Lecture hours per week B - Tutorial hours per week C - Lab hours per week D - project/assignment hours per week E - hours of preparatory work per week (*Not all modules listed are necessarily available in any one year and the curriculum is subject to changes.) CORE Modules MLE5102 Mechanical Behaviours of Materials (No longer offered as a core module for students matriculated from 2009/2010 Semester 1) The mechanical behaviour of materials, with the emphasis on the dependence of the behaviour on the structures of the materials. The elastic properties of single and polycrystalline materials. Rubber elasticity, polymer elasticity, and viscoelasticity. Tensile test and hardness test. Nano-indentation. Dislocations and twining. Yielding in crystalline solids. Applications of the dislocation theory to material strengthening mechanisms. Overview of the mechanical behaviours of thin films, nanomaterials, and cells.
2 MLE5104 Physical properties of Materials Physical properties of metals, ceramics, polymers and their hybrids are covered. These include overview of electrical conductivity, thermal conductivity, magnetic properties, ferroelectricity, piezoelectricity, and optical properties of different classes of materials. The correlations of length-scale, structure, microstructures, and interfaces of materials with their properties are emphasized. MLE6101 Thermodynamics and Kinetics of Materials This module teaches thermodynamics and kinetics of different engineering materials including metals, ceramics and polymers. The major topics cover: Equilibrium and nonequilibrium. Introduction to statistical thermodynamics Transition state theory and field effects. Solution theory. Phase diagrams. Diffusion mechanisms. Nucleation in condensed phases. Surface energy. Crystal growth. Defects in crystals. Phase transformation theories. Formation of nanostructures: nano-dots, nano-wells, nano-wires and nano-tubes. MLE6103 Structures of Materials Periodic trends in atomic properties, bonding generalization based on periodic trends, generalization about crystal structures based on periodicity. Structural concepts: crystal lattice, reciprocal lattice, diffraction, crystal structures, lattice dynamics, and energy band structure. Examples of effects of structure on physical and chemical properties are
3 discussed. ELECTIVE Modules BN5201 Advanced Biomaterials CN5161 Polymer Processing Engineering CN5162/CN6162 Advanced Polymeric Materials CN5251/CN6251 Membrane Science And Technology CE5604 Advanced Concrete Technology EE5207 Tribology and Mechanics of Magnetic Storage Systems EE5208 Applied Engineering Magnetics EE5431R Fundamentals of Nanoelectronics EE5516 Plasma Processes and Interconnects EE6438 Magnetic Materials and Devices ME5101 Applied Stress Analysis ME5102 Applied Plasticity ME5161 Optical Techniques in Experimental Stress Analysis ME5502 Engineering Plastics And Composite Materials ME5506 Corrosion Of Materials ME5513 Fracture And Fatigue Of Materials
4 ME5515 Friction And Wear Of Materials ME5603 Metal Forming Technology ME6102 Topics in Applied Mechanics ME6103 Optical Measurement and Quality Inspection ME6104 Fracture Mechanics and Applications ME6501 Research Topics in Materials Science ME6502 Topics in Materials Science ME6503 Theory of Transformations in Metals ME6504 Defects And Dislocations In Solids ME6505 Engineering Materials in Medicine ME6508 Atomistic Simulations of Materials ME6604 Modelling of Machining Processes MLE5201 Principles, Technology and Properties of Thin Films Thin-film growth techniques, plating, vaporization, sputtering, chemical vapour deposition, molecular beam epitaxy, hot-wall epitaxy and laser ablation, gas transport and pumping, vacuum and related theories and technology for thin film growth, pumps and systems, condensation, nucleation, phase stability and basic modes of thin film growth, zone models for evaporated and sputtered coatings, factors on properties of thin films,
5 columnar structure and epitaxial growth, thin film reactions, optical and electrical properties. Learning objectives: Various technologies and principles for thin solid film growth, electrical and optical properties of thin films. Target students: Graduate students of Materials Science and related disciplines. MLE5202 Structural and Electronic Ceramics Fundamentals of ceramic processing, sintering theories, microstructural control of structural and electronic ceramics; defect chemistry for structural and electronic ceramics; important structural ceramics - alumina, zirconia, silicon nitride, silicon carbide, sialons; functional properties of ceramic materials; important electronic ceramics - ferroelectric, piezoelectric, relaxors, PTC, NTC, and varistors. Learning objectives: Examine and understand the fundamental of ceramic processing, sintering theories, control of microstructures for structural and electronic ceramics; defect chemistry, important structural and electronic ceramics. Target students: Graduate Students of Materials Science and related disciplines. MLE5203 Electrochemical Techniques in Environmental Engineering Environmental control: electrochemical sensing techniques, gas and vapour phase sensors, electrochemical treatments in waste disposal. Solar power: semiconductor electrochemistry, photoelectrochemistry, wet and solid state solar cells, light emitting diodes and detectors, conducting polymers, battery systems, fuel cells, biomedical control: electrochemical bio-sensors, batteries for implants and hearing aids. Learning objectives: Solid/solution interface in terms of Fermi levels and redox potentials; requirements in generating photocurrents; way materials selection and design influences
6 battery performance; interactions between gases and solid surfaces and how these can be used to design practical sensors. Target students: Graduate students of Materials Science and related disciplines. MLE5204 Advanced Processing of Metallic Materials Processing techniques and methods: melt-spinning, laser surface melting, powder metallurgy, atomization and consolidation methods, spray forming and mechanical alloying, structure and properties: extension of solid solubility including thermodynamic and kinetic considerations, formation of non-equilibrium, quasicrystalline and noncrystalline phases, refinement of microstructure, mechanical properties, latest developments and applications of advanced materials such as quasicrystal, bulk metallic glasses, magnesium-based alloys and hard magnetic materials in the field. Learning objectives: Introduction to non-conventional processing techniques for metallic materials for advanced applications; examine effects of processing techniques on their structure and properties. Target students: Graduate students of Materials Science and related disciplines. MLE5208 Mechanical Properties of Solid Films Methods for analyzing stresses in elastically dissimilar films deposited on structures and their applications in modern industries, stress concentrations on a wavy film surface, the criteria for the formation of threading dislocations in heteroepitaxial thin films and in layered structures, surface shapes and growth modes, the morphological stability of a stressed flat films against roughening and its application in the self-assembly of nanostructures. Learning objectives: Apply basic knowledge of the mechanical properties of
7 materials to thin film-substrate films. Target students: Graduate students of Materials Science and related disciplines. MLE5210 Modelling and simulation of Materials Workload: Introduction to modelling of materials structures and properties; Units of materials quantities and nondimensionalization; Continuum modelling and deterministic representation of materials processes: boundary value problems; Discrete modelling and probabilistic representation of materials processes: statistic mechanics; Monte Carlo simulations: partition functions, sampling and random number generations, algorithms and implementations; Molecular dynamics simulations: atomic potentials, numerical algorithms and implementations; Case studies: connections between materials structures and properties. MLE6206 Nanomaterials: Science and Engineering Module descriptions (except MST and MLE modules) are available at offering department websites and subjected to changes at the respective department's own discretion The department reserves the right to decide which modules are to be offered at respective semesters
Master in Condensed Matter Physics. Master académique
Master in Condensed Matter Physics Master académique 2 " A research centered university with a personal atmosphere and multicultural flair " Students at the University of Luxembourg 3 Do it like Einstein,
More informationWEEKLY COURSE SCHEDULE : PRIMARY EDUCATION
WEEKLY COURSE SCHEDULE : PRIMARY EDUCATION Semester 1 Week 1 ( 19.09.2011-23.09.2011 ) Introduction to sol-gel processes Properties of X-Rays General Explanations on Process Planning Introduction Semester
More informationCoating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
More informationTypes of Epitaxy. Homoepitaxy. Heteroepitaxy
Epitaxy Epitaxial Growth Epitaxy means the growth of a single crystal film on top of a crystalline substrate. For most thin film applications (hard and soft coatings, optical coatings, protective coatings)
More informationIntroduction to Thin Film Technology LOT. Chair of Surface and Materials Technology
Introduction to Thin Film Introduction to Thin Film Verfahrenstechnik der Oberflächenmodifikationen Prof. Dr. Xin Jiang Lecture Institut für Werkstofftechnik der Uni-Siegen Sommersemester 2007 Introduction
More informationEngineering (ENGR) Courses. University of California, Irvine 2015-2016 1
University of California, Irvine 2015-2016 1 Engineering (ENGR) Courses ENGR 1A. General Chemistry for Engineers. 4 Units. Emphasis on solid-state chemistry. Quantum theory, atomic structure, periodic
More informationGraduate Studies and Research (GSR) This information was provided to GSR by the Program Director in parent unit
Graduate Studies and Research (GSR) This information was provided to GSR by the Program Director in parent unit Name of Degrees Offered College Department Ph.D. in Materials Science and Engineering Engineering
More informationNanoscience Course Descriptions
Nanoscience Course Descriptions NANO*1000 Introduction to Nanoscience This course introduces students to the emerging field of nanoscience. Its representation in popular culture and journalism will be
More informationChemical Engineering - CHEN
Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617
More informationDouble Degree exchange programs taught at Phelma for KTH students
Double Degree exchange programs taught at Phelma for KTH students Double Degree program for KTH students: In-coming Double Degree KTH students are registered in KTH and in Phelma, but they do not pay registration
More information2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
More informationConductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
More informationGraphene a material for the future
Graphene a material for the future by Olav Thorsen What is graphene? What is graphene? Simply put, it is a thin layer of pure carbon What is graphene? Simply put, it is a thin layer of pure carbon It has
More informationDepartments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationVacuum Evaporation Recap
Sputtering Vacuum Evaporation Recap Use high temperatures at high vacuum to evaporate (eject) atoms or molecules off a material surface. Use ballistic flow to transport them to a substrate and deposit.
More informationLecture 12. Physical Vapor Deposition: Evaporation and Sputtering Reading: Chapter 12. ECE 6450 - Dr. Alan Doolittle
Lecture 12 Physical Vapor Deposition: Evaporation and Sputtering Reading: Chapter 12 Evaporation and Sputtering (Metalization) Evaporation For all devices, there is a need to go from semiconductor to metal.
More informationApplications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
More informationDISTANCE DEGREE PROGRAM CURRICULUM NOTE:
Bachelor of Science in Electrical Engineering DISTANCE DEGREE PROGRAM CURRICULUM NOTE: Some Courses May Not Be Offered At A Distance Every Semester. Chem 121C General Chemistry I 3 Credits Online Fall
More informationMaster of Science in Materials Engineering
Master of Science in Materials Engineering Faculty of Engineering Science KU Leuven. Inspiring the outstanding. Department of Materials Engineering The Department of Materials Engineering (MTM) leverages
More informationIntroduction to VLSI Fabrication Technologies. Emanuele Baravelli
Introduction to VLSI Fabrication Technologies Emanuele Baravelli 27/09/2005 Organization Materials Used in VLSI Fabrication VLSI Fabrication Technologies Overview of Fabrication Methods Device simulation
More informationLe nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia
Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech
More informationTERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call)
TERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call) IMDEA Materials Institute (Madrid Institute for Advanced Studies of Materials) is a nonprofit independent research organization promoted
More informationA Preliminary Proposal for a Pharmaceutical Engineering Graduate Program
A Preliminary Proposal for a Pharmaceutical Engineering Graduate Program Planning Committee: Prabir Basu Steve Byrn Ken Morris Rex Reklaitis Paul Sojka Venkat Venkatasubramanian Carl Wassgren National
More informationMaterials Sciences. Dr.-Ing. Norbert Hort norbert.hort@gkss.de. International Masters Programme in Biomedical Engineering
Materials Sciences International Masters Programme in Biomedical Engineering Magnesium Innovations Center (MagIC) GKSS Forschungszentrum Geesthacht GmbH Dr.-Ing. Norbert Hort norbert.hort@gkss.de Contents
More informationApplicable to students admitted to the curriculum in 2014-2015 MSC(ENG) IN MECHANICAL ENGINEERING
Applicable to students admitted to the curriculum in 2014-2015 MSC(ENG) IN MECHANICAL ENGINEERING Objectives The aim of the curriculum is to provide advanced postgraduate education in the fields of energy
More informationLecture 9. Surface Treatment, Coating, Cleaning
1 Lecture 9. Surface Treatment, Coating, Cleaning These processes are sometimes referred to as post-processing. They play a very important role in the appearance, function and life of the product. Broadly,
More informationThe mechanical properties of metal affected by heat treatment are:
Training Objective After watching this video and reviewing the printed material, the student/trainee will learn the basic concepts of the heat treating processes as they pertain to carbon and alloy steels.
More informationClass of 2016 Second Year Common CORE - 2013-2014
2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75
More informationCHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING
CHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING Essential Standard: STUDENTS WILL UNDERSTAND THAT THE PROPERTIES OF MATTER AND THEIR INTERACTIONS ARE A CONSEQUENCE OF THE STRUCTURE OF MATTER,
More informationTecnologie convenzionali nell approccio top-down; I: metodi e problematiche per la deposizione di film sottili
LS Scienza dei Materiali - a.a. 2005/06 Fisica delle Nanotecnologie part 8 Version 4, Dec 2005 Francesco Fuso, tel 0502214305, 0502214293 - fuso@df.unipi.it http://www.df.unipi.it/~fuso/dida Tecnologie
More informationRobert G. Hunsperger. Integrated Optics. Theory and Technology. Fourth Edition. With 195 Figures and 17 Tables. Springer
Robert G. Hunsperger Integrated Optics Theory and Technology Fourth Edition With 195 Figures and 17 Tables Springer Contents 1. Introduction 1 1.1 Advantages of Integrated Optics 2 1.1.1 Comparison of
More informationFEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS. Kris Vaithinathan and Richard Lanam Engelhard Corporation
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS Kris Vaithinathan and Richard Lanam Engelhard Corporation Introduction There has been a significant increase in the world wide use of platinum for jewelry
More informationElectronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient
CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.
More informationMASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
More informationMaster's Programs. Applied Chemisty. Subject
Master's Programs Applied Chemisty Optional Advanced Seminar in Materials Science and Engineering I Advanced Seminar in Materials Science and Engineering II Special Project in Materials Science and Engineering
More informationENGINEERING CHEMISTRY
ENGINEERING CHEMISTRY [As per Choice Based Credit System (CBCS) scheme] (Effective from the academic year 2015-2016) SEMESTER - I/II Subject Code 15CHE12/15CHE22 IA Marks 20 Number of Lecture Hours/Week
More informationand LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.
LUMINOUS CHEMICAL VAPOR DEPOSITION and INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. MARCEL MARCEL DEKKER. NEW YORK DEKKER Contents Preface iii Part I.
More informationOPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS
OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS Vojtěch SVATOŠ 1, Jana DRBOHLAVOVÁ 1, Marian MÁRIK 1, Jan PEKÁREK 1, Jana CHOMOCKÁ 1,
More informationSputtered AlN Thin Films on Si and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties
Sputtered AlN Thin Films on and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties S. Mishin, D. R. Marx and B. Sylvia, Advanced Modular Sputtering,
More informationSputtering Targets and Sputtered Films: Technology and Markets
A BCC Research Semiconductor Manufacturing Report and Sputtered Films: SMC037E Use this report to: Understand the most important advances in sputtering technology and target fabrication Identify the current
More informationExamination sessions (two) winter session (January/February) summer session (June/July) Courses per years Year I Semester I Semester II crt.
Transilvania University of Braşov, Romania Study program: EGINEERING AND MANAGEMENT OF ADVANCED MATERIALS METALLIC, CERAMIC AND COMPOSITE Faculty MATERIALS SCIENCE and ENGINEERING Study program (Curriculum)
More informationDefects Introduction. Bonding + Structure + Defects. Properties
Defects Introduction Bonding + Structure + Defects Properties The processing determines the defects Composition Bonding type Structure of Crystalline Processing factors Defects Microstructure Types of
More informationPIEZOELECTRIC FILMS TECHNICAL INFORMATION
PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF
More informationGas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010
Gas Turbine Metallurgy, Coatings and Repair Technology Workshop May 2 nd, 2010 ITSC 2010 Singapore May 3-5, 2010 Fairmont Singapore Raffles City Convention Centre Course Instructors Jeff Smith Materials
More informationLight management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
More informationAdsorption at Surfaces
Adsorption at Surfaces Adsorption is the accumulation of particles (adsorbate) at a surface (adsorbent or substrate). The reverse process is called desorption. fractional surface coverage: θ = Number of
More informationModern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology, Madras
Modern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology, Madras Module - 2 Lecture - 2 Part 2 of 2 Review of Atomic Bonding II We will continue
More informationChapter Outline Dislocations and Strengthening Mechanisms
Chapter Outline Dislocations and Strengthening Mechanisms What is happening in material during plastic deformation? Dislocations and Plastic Deformation Motion of dislocations in response to stress Slip
More informationChapter 12 - Liquids and Solids
Chapter 12 - Liquids and Solids 12-1 Liquids I. Properties of Liquids and the Kinetic Molecular Theory A. Fluids 1. Substances that can flow and therefore take the shape of their container B. Relative
More informationBUNDELKHAND UNIVERSITY, JHANSI DEPARTMENT OF PHYSICS SYLLABUS 2010-11. M.Phil (PHYSICS)
BUNDELKHAND UNIVERSITY, JHANSI DEPARTMENT OF PHYSICS SYLLABUS 2010-11 M.Phil (PHYSICS) Papers Name Theory Internal Total First Semester Compulsory Papers MPPHY-101 Research Methodology 70 30 100 MPPHY-102
More informationElectron Beam and Sputter Deposition Choosing Process Parameters
Electron Beam and Sputter Deposition Choosing Process Parameters General Introduction The choice of process parameters for any process is determined not only by the physics and/or chemistry of the process,
More informationModule 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
More informationPlasma Cleaner: Physics of Plasma
Plasma Cleaner: Physics of Plasma Nature of Plasma A plasma is a partially ionized gas consisting of electrons, ions and neutral atoms or molecules The plasma electrons are at a much higher temperatures
More informationChapter Outline Dislocations and Strengthening Mechanisms
Chapter Outline Dislocations and Strengthening Mechanisms What is happening in material during plastic deformation? Dislocations and Plastic Deformation Motion of dislocations in response to stress Slip
More informationIndian Institute of Technology Hyderabad. Standing Advertisement No. IITH/2013/Faculty/5
Indian Institute of Technology Hyderabad Standing Advertisement No. IITH/2013/Faculty/5 This is a standing advertisement. There is no specific requirement on when a candidate can submit an application.
More informationMatter, Materials, Crystal Structure and Bonding. Chris J. Pickard
Matter, Materials, Crystal Structure and Bonding Chris J. Pickard Why should a theorist care? Where the atoms are determines what they do Where the atoms can be determines what we can do Overview of Structure
More informationChemical Synthesis. Overview. Chemical Synthesis of Nanocrystals. Self-Assembly of Nanocrystals. Example: Cu 146 Se 73 (PPh 3 ) 30
Chemical Synthesis Spontaneous organization of molecules into stable, structurally well-defined aggregates at the nanometer length scale. Overview The 1-100 nm nanoscale length is in between traditional
More informationMATERIALS SCIENCE AND ENGINEERING MASTER S PROGRAMS
MATERIALS SCIENCE AND ENGINEERING MASTER S PROGRAMS Program Description The MSE graduate program was designed as an interdisciplinary venture that would attract highly qualified graduate students, considered
More informationDr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/
FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak adamiak@polsl.pl http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials
More informationجامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
More informationProblems in Welding of High Strength Aluminium Alloys
Singapore Welding Society Newsletter, September 1999 Problems in Welding of High Strength Aluminium Alloys Wei Zhou Nanyang Technological University, Singapore E-mail: WZhou@Cantab.Net Pure aluminium has
More informationLecture 19: Eutectoid Transformation in Steels: a typical case of Cellular
Lecture 19: Eutectoid Transformation in Steels: a typical case of Cellular Precipitation Today s topics Understanding of Cellular transformation (or precipitation): when applied to phase transformation
More informationPulsed laser deposition of organic materials
Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department
More informationMechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied
Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied Stress and strain fracture or engineering point of view: allows to predict the
More informationIntroduction to X-Ray Powder Diffraction Data Analysis
Introduction to X-Ray Powder Diffraction Data Analysis Center for Materials Science and Engineering at MIT http://prism.mit.edu/xray An X-ray diffraction pattern is a plot of the intensity of X-rays scattered
More informationIntroduction OLEDs OTFTs OPVC Summary. Organic Electronics. Felix Buth. Walter Schottky Institut, TU München. Joint Advanced Student School 2008
Felix Buth Joint Advanced Student School 2008 Outline 1 Introduction Difference organic/inorganic semiconductors From molecular orbitals to the molecular crystal 2 Organic Light Emitting Diodes Basic Principals
More informationStructure and properties of transparent conductive ZnO films grown by pulsed laser
Structure and properties of transparent conductive ZnO films grown by pulsed laser deposition (PLD) by Yu Hsiu, Lin A dissertation submitted to the University of Birmingham for the degree of Master of
More informationFormation of solids from solutions and melts
Formation of solids from solutions and melts Solids from a liquid phase. 1. The liquid has the same composition as the solid. Formed from the melt without any chemical transformation. Crystallization and
More informationStudy Plan for The Master Degree In Industrial Engineering / Design and Manufacturing. (Thesis Track)
Study Plan for The Master Degree In Industrial Engineering / Design and Manufacturing (Thesis Track) Plan no. 2005 T A. GENERAL RULES AND CONDITIONS: 1. This plan conforms with the regulations of the general
More informationnanovea.com MECHANICAL TESTERS Indentation Scratch Wear
MECHANICAL TESTERS Indentation Scratch Wear nanovea.com MECHANICAL TESTER INTRO Nanovea Mechanical Testers provide unmatched multi-function Nano and Micro/Macro modules on a single platform. Both the Nano
More informationEngineering Materials Research /DEVISER/
DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional
More informationSize effects. Lecture 6 OUTLINE
Size effects 1 MTX9100 Nanomaterials Lecture 6 OUTLINE -Why does size influence the material s properties? -How does size influence the material s performance? -Why are properties of nanoscale objects
More informationStudy Plan for Bachelor Program in Department of teacher of upper basic level - Teaching Science
Study Plan for Bachelor Program in Department of teacher of upper basic level - Teaching Science Specialization Requirements: The students should complete the following courses with Average 70% and above:
More informationManufacturing Process and Material Properties of Carbon and Graphite Materials. Schunk Kohlenstofftechnik
Manufacturing Process and Material Properties of Carbon and Graphite Materials Schunk Kohlenstofftechnik Carbon and graphite materials are manufactured according to processes based on conventional ceramic
More informationINTERNATIONAL GRADUATE PROGRAMMES
University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech
More information2. Nanoparticles. Introduction to Nanoscience, 2005 1
2. Nanoparticles Nanoparticles are the simplest form of structures with sizes in the nm range. In principle any collection of atoms bonded together with a structural radius of < 100 nm can be considered
More informationPlasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
More information1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III
1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III 1. Introduction............................. 2. Electrostatic Charging of Samples in Photoemission Experiments............................
More informationProjects and R&D activities
Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC) Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of
More informationComputational materials modeling:
Mining & Materials Engr. Computational materials modeling: Fast-tracking materials design Jun Song The University of Michigan 1 Structural Dynamics Laboratory Faculty of at a Glance Associated with 8 Nobel
More informationNDSU Department of Physics. Graduate Student Handbook
NDSU Department of Physics Graduate Student Handbook Department of Physics North Dakota State University Fargo, ND 58108-6050 History Draft: August 24, 2014 Table of Contents 1. Contact 2 2. Graduate Program
More informationGrade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics...
Products Grade Selection... Coated / CVD... Coated / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Uncoated Cemented Carbides... Ultra fine Grain Cemented Carbides... -2-4 -6-8 -0-2 - -4-5
More informationTuskegee University College of Engineering Master of Science (MS) in Materials Science and Engineering
Tuskegee University College of Engineering Master of Science (MS) in Materials Science and Engineering Contact Information: Dr. Mahesh Hosur, Head; hosur@mytu.tuskegee.edu; Ph.: +1 (334) 724-4220 Ms. Felicia
More informationGREEN NANOTECHNOLOGY. Geoffrey. Energy in the Built Environment. Solutions for Sustainability and. B. Smith Claes G. Granqvist.
GREEN NANOTECHNOLOGY Solutions for Sustainability and Energy in the Built Environment Geoffrey B. Smith Claes G. Granqvist CRC Press Taylor & Francis Group Boca Raton London NewYork CRC Press is an imprint
More informationKINETIC MOLECULAR THEORY OF MATTER
KINETIC MOLECULAR THEORY OF MATTER The kinetic-molecular theory is based on the idea that particles of matter are always in motion. The theory can be used to explain the properties of solids, liquids,
More informationLecture: 33. Solidification of Weld Metal
Lecture: 33 Solidification of Weld Metal This chapter presents common solidification mechanisms observed in weld metal and different modes of solidification. Influence of welding speed and heat input on
More informationUNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017.
UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017 Part II Information on study programmes A) General description
More informationWJM Technologies excellence in material joining
Girish P. Kelkar, Ph.D. (562) 743-7576 girish@welding-consultant.com www.welding-consultant.com Weld Cracks An Engineer s Worst Nightmare There are a variety of physical defects such as undercut, insufficient
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationMk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011
Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011 Admission to Ph D Programmes 2013-2014 (Starting from January-2014)
More informationImproved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process
Improved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process Lynne Michaelson, Krystal Munoz, Jonathan C. Wang, Y.A. Xi*, Tom Tyson, Anthony Gallegos Technic Inc.,
More informationChapter Outline. Diffusion - how do atoms move through solids?
Chapter Outline iffusion - how do atoms move through solids? iffusion mechanisms Vacancy diffusion Interstitial diffusion Impurities The mathematics of diffusion Steady-state diffusion (Fick s first law)
More informationENERGY DISSIPATION IN CONDUCTIVE POLYMERIC FIBER BUNDLES: SIMULATION EFFORT
ENERGY DISSIPATION IN CONDUCTIVE POLYMERIC FIBER BUNDLES: SIMULATION EFFORT NSF Summer Undergraduate Fellowship in Sensor Technologies Dorci Lee Torres-Velázquez (Mathematics) - University of Puerto Rico
More informationCurriculum for The Master of Science Programme in Materials Technology
The Faculty of Engineering and Science The Study Board for Industry and Global Business Development Curriculum for The Master of Science Programme in Materials Technology Aalborg University September -
More informationMicroscopy and Nanoindentation. Combining Orientation Imaging. to investigate localized. deformation behaviour. Felix Reinauer
Combining Orientation Imaging Microscopy and Nanoindentation to investigate localized deformation behaviour Felix Reinauer René de Kloe Matt Nowell Introduction Anisotropy in crystalline materials Presentation
More informationUndergraduate Designated Minors in Carnegie Institute of Technology
Carnegie Mellon University 1 Undergraduate Designated Minors in Carnegie Institute of Technology Undergraduate students in the Carnegie Institute of Technology can elect to complete an interdisciplinary
More informationThe energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.
Elective Concentrations The program in Mechanical Engineering is designed to appeal to students with a wide variety of interests and professional goals. By an appropriate choice of elective courses, students
More informationCONTENTS. Preface. 1.1.2. Energy bands of a crystal (intuitive approach)
CONTENTS Preface. Energy Band Theory.. Electron in a crystal... Two examples of electron behavior... Free electron...2. The particle-in-a-box approach..2. Energy bands of a crystal (intuitive approach)..3.
More informationAssoc. Prof. Dr. M. Aylin DELİORMANLI
Assoc. Prof. Dr. M. Aylin DELİORMANLI EDUCATION Degree University Department / Program Undergrad Ege University Chemical Engineering 99 99 M.S. Izmir Institute of Tech. Materials Science and Engineering
More information