SP-125 Plus. Ready-To Weld! Wire Feeder / Welder

Transcription

1 SP-125 Plus Ready-To Weld! Wire Feeder / Welder

2 R SP-125 Plus The SP-125 Plus is a complete semiautomatic constant voltage DC arc welding machine. Built to NEMA specifications, it combines a constant voltage power source and a constant speed wire feeder. It is ideally suited for individuals having access to 115 volt AC input power, and want the ease of use, quality and dependability of both flux-cored arc welding applications and MIG welding applications. The SP-125 Plus is compact, portable and reliable and can be used for home, hobby, workshop and autobody repairs. The SP-125 Plus package includes: Magnum 100L welding gun and 10 ft. (3.0m) cable assembly, with gas nozzle, ( mm) cable liner,.023/.025 (0.6mm) and.030 (0.8mm) contact tips. Work clamp and 10 ft. (3.0m) cable. 10 ft. (3.0m) input power cord with plug for connection to standard 115 volt receptacles. 2 lb. (.90 kg) spool of.025 (0.6mm) L-56 MIG wire. READY-TO-WELD! Includes: Sample MIG Wire Gas Regulator and Hose Kit ADVANTAGE LINCOLN Now ready to feed ( mm) wires. Designed for ( mm) solid MIG wire, and.035 (0.9mm) flux-cored wire. Comes standard ready to feed ( mm) diameter wires, with excellent performance using.023/.025 (0.6mm) wires without changing the gun liner. LISTED UL 170G 115 Volt Argon-mixed gas regulator and hose kit. Guide tubes and reversible drive roll ready to feed Lincoln s.025 (0.6mm) and.030 (0.8mm) diameter L-56 MIG wire, and.035 (0.9mm) flux-cored wire. Gas solenoid valve for use with CO 2, Argon, or Argon mixed gases. R For welding 24 gauge through 5/16 ( mm) mild steel plate. Suitable for welding with ( mm) stainless steel and.035 (0.9mm) aluminum diameter wires. 115 volt operation - no special wiring required. Solid state output control provides extra long life for repetitive welding applications. Quick Release idle roll pressure arm easily adjusts wire tension for positive wire feeding. Reversible, dual groove drive roll will feed ( mm) diameter solid wires and.035 (0.9mm) flux-cored wires. Adjustable brake spindle accommodates both 8 (200mm) diameter and 4 (100mm) diameter spools of wire. High torque low-rpm drive motor provides extra long life and quiet operation. Electronic full range motor speed control compensates for load and power supply variations to maintain constant wire feed speed. Rugged and reliable design for dependable service and long life. Large, easy to set knobs provide continuous full range control of both wire speed and voltage procedures. Convenient chart mounted inside wire feed section door for setting welding procedures. Electronic and thermostatic protection from current overload and excessive temperatures. 3 year warranty on parts and labor. Manufactured under a quality system certified to ISO 9002 requirements.

3 VOLTS PERFORMANCE PLUS 100 DUTY CYCLE CHART DC OUTPUT CURVES % DUTY CYCLE MIN MID (TYP.) MAX AMPS TECHNICAL SPECIFICATIONS AMPS Product Ordering Input AC Rated DC Output Input Amps at Rated Output Range Weight Dimensions Name Information Voltage Amps/Volts/Duty Cycle (1) DC Output (continuous) (net) HxWxD 115 V SP-125 K V 90A / 18V / 20% 20 Amps AMPS 54 lbs 12 x 9.75 x 16.5 in. Plus 1 Phase (24.3 kg) (305 x 248 x 419mm) 60 Hz CSA: CSA: WFS 63A / 20V / 20% 15 Amps ipm ( m/min) (1) Based on a 10 min. period. Max Output: OCV 25 Amps 10-28V THE TOTAL SOLUTION For mild steel MIG welding applications: As shipped, the SP-125 Plus is ready to weld.025 (0.6mm) or.030 (0.8mm) diameter wire. Order.025 (0.6mm) or.030 (0.8mm) L-56 MIG welding wire supplied on 12.5 lb. (5.6kg) spools. A shielding gas is required. CO 2 gas or an Argon/CO 2 mixed gas blend is recommended. Use electrode positive polarity. For mild steel flux-cored arc welding applications: Reverse the drive roll already installed in the SP-125 Plus to feed.035 (0.9mm) diameter wire and install.035 (0.9mm) contact tip into Magnum 100L gun. Use electrode negative polarity. No external shielding gas is required for Lincoln Electric s NR-211-MP Innershield electrode. For added convenience, order K549-1 Innershield welding kit which includes.035 (0.9mm) wire, contact tip and extra cable liner.

4 OPTIONS AVAILABLE Knurled Drive Roll For feeding.035 (0.9mm) flux-cored wire. Order KP C. Adjustable CO 2 Gas Regulator and Hose Kit For use on CO 2 gas cylinders. Includes an adjustable pressure and flow regulator, and 10 ft. (3.0m) gas hose. Order K Argon-Mixed Gas Regulator & Hose Kit (1) For use on argon or argon-mixed gas cylinders. Includes a preset, nonadjustable pressure and flow regulator, and 10 ft. (3.0m) gas hose. Order K Deluxe Adjustable Gas Regulator & Hose Kit Accommodates CO 2 or Argon blend gas and includes a cylinder pressure gauge, dual scale flow gauge and 4.3 ft. (1.3mm) gas hose. Order K Innershield Welding Kit Includes everything needed for Magnum 100L gun and cable to use.035 (0.9mm) diameter flux-cored wire. Includes a contact tip, gasless nozzle, extra cable liner, and a 10 lb. (4.5kg) spool of.035 (0.9mm) Innershield NR -211-MP wire. Order K Spot/Stitch Timer Kit Includes spot timer to precisely control the spot welding arc time, and a stitch timer to control the on/off cycle of the arc to prevent burnthrough on thin gauge materials. Order K Utility Cart Accommodates an SP-125 Plus, a gas cylinder [100 lb. (45.3 kg) max.], tools and welding accessories. Includes an adjustable handle, front casters and rear wheels. Order K520. Power Cord Extension (115V) For connecting between SP-125 Plus and power receptacle when extra distance is required. 115V, 20 ft. (6.0mm). Order K Aluminum Feeding Kit Includes drive roll, idle roll, guide tubes, non-metallic cable liner, and contact tips (qty. 6) for feeding.035 (0.9mm) aluminum wire. Order K (1) Included with SP-125 Plus but with 4.5 ft. gas hose.

5 REPLACEMENT PARTS Magnum 100L Gun and Cable Assembly, 10 ft. (3.0m) cable length For.023/.025 and.030 (0.6 and 0.8mm) MIG wire: K530-2 For.035 (0.9mm) flux-cored wire: K530-3 For ( mm) MIG wire and flux-cored wire K530-5 (2) Cable Liner ( mm) M ( mm) M ( mm) M (1) (2) Gas Diffuser S19728 (2) Contact Tips Standard Duty.023/.025 (0.6mm) S (2).030 (0.8mm) S (2).035 (0.9mm) S (1) Tapered.023/.025 (0.6mm) S (0.8mm) S (0.9mm) S Gas Nozzle Fixed - Tip Flush 1/2 (12.7mm) M16294 (2) Fixed - Tip Recessed 3/8 (9.5mm) M /2 (12.7mm) M /8 (15.9mm) M Gasless Nozzle M16418 (1) Gun Tube (60 ) S19703 (2) L-56 Solid MIG Wire.025 (0.6mm) ED (0.8mm) ED NR-211-MP Flux-Cored Wire.035 (0.9mm) ED (1) Included with K549-1 Innershield Welding Kit. (2) Included with SP-125 Plus. DRIVE ROLLS Drive Roll Groove 1 Groove 2 M15448 (1) Smooth.030 to.035 Smooth (Solid Wire) (Solid Wire) KP C.035 Knurled.035 Knurled (Flux Cored Wire) (Flux Cored Wire) (1) Included with SP-125 Plus.

6 SP-125 PLUS ORDER FORM PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE SP-125 Plus K660-3 Optional Features Spot/Stitch Timer Kit K695-2 Utility Cart K520 Flux-Cored Wire Welding.035 Knurled Drive Roll KP C.035 Innershield Welding Kit K549-1 Aluminum Welding Aluminum Feeding Kit K663-2 Optional Gas Regulator and Hose Kits Adjustable CO 2 Gas Regulator and Hose Kit K Argon-Mixed Gas Regulator and Hose Kit (1) K Deluxe Adjustable Gas Reglator and Hose Kit K586-1 (1) Included with SP-125 Plus. TOTAL: Customer Assistance Policy The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying this type of fabrication methods and service requirements. DISTRIBUTED BY: THE LINCOLN ELECTRIC COMPANY Local Sales and Service through Global Subsidiaries and Distributors Cleveland, Ohio U.S.A TEL: FAX: WEB SITE: Wire Feeder / Welders E7.20 3/00