Translation Stage VT
|
|
- Blake Nichols
- 7 years ago
- Views:
Transcription
1 Translation Stage VT Translation Stage VT-80 Linear Stage VT-7 // // East West //
2 4.110 Linear Stage VT-7 FACTS The VT-7 linear stage was designed for Fx(N) Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) Phase Load characteristics standard industrial applications that require less than 6 µm repeatability and up to 600 mm travel range. Typical applications for this metrology stage are inspection and assembly systems. The low profile yet rigid steel design allows setups with long travel ranges within limited space conditions. A precision ball screw with a 4 mm pitch guarantees a quiet, smooth motion. The VT-7 linear stages are equipped with a roller guide system and are motorized with a DC or 2-phase stepper motor. Additionally the VT-7 can be ordered with our SMC pollux motorcontroller module. TECHNICAL DATA Travel range (mm) Straightness / Flatness (µm) ±2 ± ±4 ± ±7 ±9 ± 11 Pitch (µrad) ± ± 60 ± 70 ± 80 ± 90 0 ± 110 Yaw (µm) ± ± ± ± 60 ± 80 ± 90 ± 90 Weight (kg) Motor (Pitch 4 mm) 2Phase (RE) 20 (FS) 20 (FS) Speed max. (mm/sec) Resolution calculated (µm) Resolution typical (µm) KEY FEATURES 2 Bi-directional Repeatability (µm) ±6 ±6 ±6 Uni-directional Repeatability (µm) Travel range up to 600 mm Nominal Current (A) Uni-directional repeatability down to µm Voltage Range (V) Maximum speed 100 mm/sec Accuracy Load capacity up to kg Velocity range (mm/sec) Integrated hall limit switches 24 on request Material Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change Steel
3 Linear Stage VT APPLICATIONS Travel (mm) A B C D Phase SMC- Pollux Controller integrated CONTROLLERS ROBOTICS LINEAR STAGES ROTATION STAGES PIEZO STAGES MANUAL STAGES ACCESSORIES APPENDI Order No Phase-04 2 mm mm mm 0 mm 4 0 mm 0 mm mm 7 HLS-010, Hall limit switches A C 100 B.8 o Dx100 n. 4x M x8 mm UPS-1 UPM-160 HPS-170 LS-270 LMS-2 LMS-180 LS-180 LS-120 LS-110 LMS-80 LMS-60 PLS-8 LS-6 MTS-6 MTS-70 VT-7 VT-80 LS- VT-21 S CS-4 MS-8 MS-4 KT-120 MS-bio NPE-200 UPL-120 ES-100 ES-82 ES-70 ES- MA- MP-20 MP-20 B MP-1 ASS E // info@pi-usa.us // East West //
4 4.112 Translation Stage VT-80 FACTS Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) Phase Load characteristics compensated backlash Fx(N) lead screw guarantee a quiet and smooth motion. The VT-80 translation stages are equipped with integrated limit switches and are motorized with a DC or 2-phase stepper motor. Additionally, the VT-80 can be ordered with our SMC Pollux motorcontroller module. Due to the compact dimensions, the VT-80 stages are especially suitable for lower duty cycles applications in instrumentation. All VT-80 translation stages can be directly The VT-80 translation stage is a popular assembled in Y configurations. The Y laboratory stage that offers a wide range systems with a travel of 2 mm must be of travel lengths. A backlash-free re- assembled at the factory and must be circulating ball bearing along with a specified when ordering. TECHNICAL DATA Travel range (mm) Straightness / Flatness (µm) ±8 ± 11 ± 12 ± 14 ± 20 ± 2 ± Pitch (µrad) 0 ± 110 ± 120 ± 1 ± 1 ± 170 ± 190 ± 210 Yaw (µm) ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 Weight (kg) Motor (Pitch 1 mm) 2Phase (RE) (FS) (FS) Speed max. (mm/sec) Resolution calculated (µm) KEY FEATURES Resolution typical (µm) Bi-directional Repeatability (µm) Uni-directional Repeatability (µm) 0.8 Travel range up to 0 mm Nominal Current (A) Uni-directional repeatability down to µm Voltage Range (V) Maximum speed 20 mm/sec Accuracy on request Load capacity up to kg Velocity range (mm/sec) Integrated mechanical limit switches Material 24 Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
5 Translation Stage VT APPLICATIONS Travel (mm) A B C CONTROLLERS ROBOTICS LINEAR STAGES ROTATION STAGES PIEZO STAGES 2Phase-041 SMC-Pollux Controller integrated MANUAL STAGES ACCESSORIES APPENDI Order No Phase mm (xy set up by PI micos) 1 mm 2 7 mm 100 mm 4 1 mm 200 mm 6 2 mm 7 0 mm 8 single stage 0 2 mm xy setup x M6 x x v n8 x4. / Ø A A B 6 o4 C o4 2x M4 x 4x M4 x 2x nh7 x n4. 4x nh7 x4 max mm 4x M4 x UPS-1 UPM-160 HPS-170 LS-270 LMS-2 LMS-180 LS-180 LS-120 LS-110 LMS-80 LMS-60 PLS-8 LS-6 MTS-6 MTS-70 VT-7 VT-80 LS- VT-21 S CS-4 MS-8 MS-4 KT-120 MS-bio NPE-200 UPL-120 ES-100 ES-82 ES-70 ES- MA- MP-20 MP-20 B MP-1 ASS E // info@pi-usa.us // East West //
6 USA (East) & CANADA USA (West) & MEICO PI (Physik Instrumente) L.P. PI (Physik Instrumente) L.P. 16 Albert St. 420 Trabuco Rd., Suite 100 Auburn, MA 011 Irvine, CA Tel: +1 (8) Tel: +1 (949) Fax: +1 (8) Fax: +1 (949) GERMANY Headquarters: PI micos GmbH Freiburger Strasse D Eschbach GERMANY Phone: Fax: info@pimicos.com home: Physik Instrumente (PI) GmbH & Co. KG Auf der Römerstraße Karlsruhe/Palmbach Tel: +49 (721) Fax: +49 (721) info@pi.ws Call Us Today (East) (West)
ProScan DC Linear Servo Stage Technology www.prior.com
ProScan DC Linear Servo Stage Technology www.prior.com Stretching the Boundaries of Performance... Ultra Quiet Operation Can you hear that? Neither can we! Even at high speeds (up to 300 mm/sec) the linear
More informationPhotonic & Fiber Alignment Engines
Photonic & Fiber Alignment Engines NANOSCALE ACCURACY, MILLISECOND RESPONSIVENESS, ULTRA-FAST GLOBAL OPTIMIZATION, REAL-TIME TRACKING, 3 TO 18 OR MORE AXES All-in-One Host Software Comprehensive, Cross-Platform
More informationMotion and Positioning
Motion and Positioning The Broadest and Deepest Portfolio WWW.PI.ws Technology The Broadest and Deepest Portfolio Core Technologies n Piezo components, actuators and motors n Magnetic drives n Guiding
More informationATS0300 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground, high-accuracy lead screw. Ultra-fine resolution
Linear Stages Mechanical Bearing, Ball-Screw Stage Precision-ground, high-accuracy lead screw Ultra-fine resolution Crossed-roller bearings for high load capacity and smooth motion Includes cogless, brushless
More informationPrecision Work on the Human Eye
WHITEPAPER Precision Work on the Human Eye PIEZO-BASED NANOPOSITIONING SYSTEMS FOR OPHTHALMOLOGY BIRGIT BAUER PIEZO-BASED NANOPOSITIONING SYSTEMS FOR OPHTHALMOLOGY PAGE 2 Content Introduction... 3 Precision
More informationEFC 3600. Frequency converters
2 Bosch Rexroth AG Electric Drives and Controls Documentation Compact and complete: space saving side-by-side assembly, plug-in I/O terminals, with brake chopper and mains filter for ultra-simple installation
More information10. CNC Hardware Basics
CAD/CAM Principles and Applications 10 CNC Hardware Basics 10-1/10-20 by P.N.Rao 10. CNC Hardware Basics 10.1 Structure of CNC machine tools Table 10.1 Some design criteria for CNC machine tool design
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationLinear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
More informationAlternative Linear Motion Systems. Iron Core Linear Motors
Alternative Linear Motion Systems ME EN 7960 Precision Machine Design Topic 5 ME EN 7960 Precision Machine Design Alternative Linear Motion Systems 5-1 Iron Core Linear Motors Provide actuation forces
More informationProducts. Laser 2015. www.pi.ws
Products Laser 2015 Contents Q-Motion Miniature Stages High Resolution, Affordable Price N-472 PiezoMike Linear Actuator With Position Sensor for Closed-Loop Operation N-412 Linear Actuator with PIShift
More informationThe modular Line and Room Gantry design from SCHUNK
The modular Line and Room Gantry design from SCHUNK Save up to 50% Exceptional precision from the competence leader for clamping technology and gripping systems Standard Gantries ready for assembly, at
More informationBall Rail Tables TKK. with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company
with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationTHERMAL ANEMOMETRY ELECTRONICS, SOFTWARE AND ACCESSORIES
TSI and TSI logo are registered trademarks of TSI Incorporated. SmartTune is a trademark of TSI Incorporated. THERMAL ANEMOMETRY ELECTRONICS, SOFTWARE AND ACCESSORIES IFA 300 Constant Temperature Anemometry
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationLDDM Linear Direct Drive Motors. ULIM Series
DDM inear Direct Drive Motors UIM Series 1 The Perfect Drive for Every Application. INA - Drives & Mechatronics GmbH & Co. ohg, a company of the Schaeffler Group, specializes in linear and rotary direct
More informationResolution Enhancement of Imaging Chips with Piezo Technology
Resolution Enhancement of Imaging Chips with Piezo Technology Pixel Sub-Stepping, Vibration Cancellation Increasing the Resolution of Sensor Chips Applications of Pixel Sub-Stepping Schematic diagram for
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationWe bring quality to light. MAS 40 Mini-Array Spectrometer. light measurement
MAS 40 Mini-Array Spectrometer light measurement Features at a glance Cost-effective and robust CCD spectrometer technology Standard USB interface Compatible with all Instrument Systems measuring adapters
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationProducts. Air Bearing- Linear systems 06-2009 EITZENBERGER. Luftlagertechnik GmbH. Feichtmayrstraße 17 D-82405 Wessobrunn
Products Air Bearing- Linear systems 06-2009 ITZNBRGR D- mail: URL. Index - Air Bearing linear Systems Z 0526 Air Bearing Linear Stage with high resolution encoder and iron free linear motor Z 0512 XY-Air
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationIntroduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically
Introduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically Part 2 of 2 In Part 1, we discussed the basics of a stepper motor-based linear actuator, one of the most effective
More informationCartesian Robots Maximize your Application s Throughput
Cartesian Robots Maximize your Application s Throughput Minimal Tracking Error Flexible Design Lowest Cost of Ownership Configurable www.aerotech.com United States Germany United Kingdom Japan China Broad
More informationIntroduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically
Introduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically Part 1 of 2 When students are trained in classic mechanical engineering, they are taught to construct a system
More informationTechnical Concept. Filter Fan Unit COMPACT. Type COMPACT AC Type COMPACT EC
Technical Concept Filter Fan Unit COMPACT Type COMPACT AC Type COMPACT EC Ultra Filter Fan Unit COMPACT Technical Concept Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationFeatures IMC Precision Link Conveyors are ideal for linear transfer applications with features including:
Features IMC Precision Link Conveyors are ideal for linear transfer applications with features including: Table Top or Heavy Duty versions Precision positioning of parts for assembly or manufacturing processes
More informationMINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
More informationDryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationZ Type. F Type. S Type. Electric Grippers. Series LEH. 3-finger type is added! Can hold round work pieces.
Electric Grippers Easy setting 2 Data can be set with only 2 items: position and force. Data Axis 1 Step No. Posn 12. mm Force % Teaching box screen Drop prevention function is provided. (Self-lock mechanism
More informationVario Line. Spring pressure single-disc brake 76 431..H00
Vario Line Spring pressure single-disc brake 76 431..H00 Vario Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion the brake experts As a solution provider, Kendrion develops,
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationTBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationMDrive Linear Actuators
MDrive Linear Actuators All-in-one linear motion systems Delivering long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable. MDrive Linear Actuators
More informationMONO BLOCK DIRECTIONAL CONTROL VALVE TS
SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More informationPrecision Work on the Human Eye
Precision Work on the Human Eye Piezo-Based Nanopositioning Systems for Ophthalmology Page 1 of 5 Introduction Human beings are visual animals, in other words, they acquire most information visually. It
More informationMercury TM 1500P PCB-Mount Digital Encoders
Mercury TM 1500P PCB-Mount Digital Encoders Factory Set Resolution to 0.50μm Reflective Linear and Rotary Encoders Sensor the size of a Dime Resolution Factory Set: x4, x8, x20, or x40 Linear: 5μm, 2.5μm,
More informationServo drives. Compact converter IndraDrive Cs
Compact converter IndraDrive Cs 2 Bosch Rexroth AG Electric Drives and Controls Documentation Highly versatile, extremely compact drives Power range 100 W to 9 kw Multi-protocol-enabled, Ethernet-based
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationT-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
More informationD.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
More informationHSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
More informationmk Conveyor Technology
mk Conveyor Technology One construction kit many options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion Advantages of the mk modular system Everything comes from
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationGLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT
GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT 1.- GLYDEA TM SYSTEM. DEFINITION AND BENEFITS 1.1.- GLYDEA TM SYSTEM OVERVIEW 1.2.- GLYDEA M SYSTEM BENEFITS 2.- ARCHITECTS SPECIFICATIONS
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationAir damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
More informationDEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
More informationCIM Computer Integrated Manufacturing
INDEX CIM IN BASIC CONFIGURATION CIM IN ADVANCED CONFIGURATION CIM IN COMPLETE CONFIGURATION DL CIM A DL CIM B DL CIM C DL CIM C DL CIM B DL CIM A Computer Integrated Manufacturing (CIM) is a method of
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationLENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
More informationPhil Crowther, Product Management, April 2015 YuMi IRB 14000 Overview
Phil Crowther, Product Management, April 2015 YuMi IRB 14000 Overview YuMi: IRB 14000 Agenda Differentiated value proposition Overview and vision Main features Payload Working range Performance and accuracy
More information2000 Series Ultrasonic Welding
2000 Series Ultrasonic Welding Modular Standard Components Exclusively from BRANSON worldwide Second Generation Digital Power Supplies Branson Worldwide Best for Plastics BRANSON offers a wide range of
More informationServoOne. Specification. Option 2 - Technology. x 11. x 8 X 8. x 10. x 9. x 7. x 6 TTL Encoder / TTL Encoder simulation
x - + - + x L L L AC SO 4-45 A DC SO 4- A ServoOne Specification x 9 - + - + x 7 x 8 X 8 Option - Technology x 6 TTL Encoder / TTL Encoder simulation Specification ServoOne Specification Option - Technology
More informationDigital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
More informationDC Electronic Loads 8500 series
Data Sheet DC Electronic Loads 8500 series 2400W 600 W - 1200 W 300 W Versatile & Economical DC Electronic Loads The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating
More informationSetting up the DeskCNC controller.
1) Determine the steps to linear motion ratios for each axis. 2 2) Determine Maximum velocity (speed). 3 3) Setting up the software Machine Tab 4 4) Setting up the software DeskCNC Setup Tab 5 5) Setting
More informationPhysical Specifications (Custom design available.)
Helmholtz Coils A useful laboratory technique for getting a fairly uniform magnetic field, is to use a pair of circular coils on a common axis with equal currents flowing in the same sense. For a given
More informationEncoder WDG 58B. www.wachendorff-automation.com/wdg58b
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationSensor/Raft Metrology Status
Sensor/Raft Metrology Status Peter Z. Takacs Instrumentation Division Brookhaven National Laboratory 17 Oct 2005 1 Sensor/Raft metrology - current status Laboratory space preparation near completion. Optical
More information10 tips for servos and steppers a simple guide
10 tips for servos and steppers a simple guide What are the basic application differences between servos and steppers? Where would you choose one over the other? This short 10 point guide, offers a simple
More informationDescription. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
More informationAC Servo Motors and Servo Rated Gearheads
AC Servo Motors and Servo Rated Gearheads for the automation industry Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8)
More informationTorque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationFEATURES. ! Sealing to IP68 (fully waterproof) Infra-red optical navigation technology
ERGONOMICAL IP68 TRACKBALL UNIT Waterproof trackball & scroll wheel IP68 50mm The Series desktop trackball is an extremely high specification device that incorporates the latest IP68 technology. The trackball
More informationSpeed sensor MiniCoder GEL 247
Speed sensor MiniCoder GEL 47 Flange assembly Technical information version 08.0 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless measurement of rotational movements
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationTorque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
More informationwww.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
More informationDigital Hotplate. Stirrers. Compact & Round Plate Type Hotplate Stirrers. Analog Hotplate Stirrer. Digital Hotplate
- Smart Design of Body made by Aluminum Die-Casting - -Chemical/Acid Resistance - Superior Temperature Uniformity : Less than 10% on the at Ambient Temperature - User s Self -Compensation Function : to
More informationCALIBRATION OF A ROBUST 2 DOF PATH MONITORING TOOL FOR INDUSTRIAL ROBOTS AND MACHINE TOOLS BASED ON PARALLEL KINEMATICS
CALIBRATION OF A ROBUST 2 DOF PATH MONITORING TOOL FOR INDUSTRIAL ROBOTS AND MACHINE TOOLS BASED ON PARALLEL KINEMATICS E. Batzies 1, M. Kreutzer 1, D. Leucht 2, V. Welker 2, O. Zirn 1 1 Mechatronics Research
More informationOCSM Series. High Resolution Digital Crane Scale. User Guide
OCSM Series High Resolution Digital Crane Scale Content 1. Safety Guide... 1 2. Features... 1 3. Specifications... 2 4. Capacity... 3 5. Display & Keys... 3 Scale & Remote Keys... 3 Indicators... 4 Message...
More informationELS3 Electric Height Adjustment for sit-to-stand workplaces
ELS3 Electric Height Adjustment for sit-to-stand workplaces www.suspa.com Electric Height Adjustment for sit-to-stand workplaces Electric Lifting Column ELS3-650 With the Electrical Lifting Column ELS3
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationLinear Motion System: Transport and positioning for demanding applications
Linear Motion System: Transport and positioning for demanding applications 2 The Perfect Concept for a variety of applications The Linear Motion System (LMS) from Rexroth is a unique technical solution
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationButterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
More informationTubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
More informationSHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
More informationAdept Technology, Inc. Industrial Robotics Product Range YOUR INTELLIGENT ROBOTICS PARTNER
Adept Technology, Inc. Industrial Robotics Product Range YOUR INTELLIGENT ROBOTICS PARTNER ADEPT ROBOTS Quattro Parallel Robots The Adept Quattro robot is the fastest parallel robot in the world. The patented
More informationLinear actuator Econom 0. Our intelligent model: Econom 0. Econom 0
Linear actuator Econom 0 Our intelligent model: Econom 0 Econom 0 Linear actuators Econom 0 Description Applications Facts The users of the steel or stainless steel Econom 0 come from many different industries:
More informationInstruction Manual Differential Pressure Transmitter
DE28 Instruction Manual Differential Pressure Transmitter Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationCNC HARDWARE & TOOLING BASICS
Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,
More informationEncoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationMR221-MR222 Heavy Duty Geared Limit Switches, CE Approved
MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MICRONOR automation components Product MICRONOR MR221 and MR222 series Heavy Duty Geared Limit Switches are for use in the most demanding industrial
More informationCONFIGURABLE SAFETY RELAYS
MSI-m/R, MSI-mx/Rx Configurable MSI Safety Relay with function for efficient material flow in a packaging application Special features Sequential or Parallel with automatic mode detection MSI-mx for separate
More informationMoveInspect HF HR. 3D measurement of dynamic processes MEASURE THE ADVANTAGE. MoveInspect TECHNOLOGY
MoveInspect HF HR 3D measurement of dynamic processes MEASURE THE ADVANTAGE MoveInspect TECHNOLOGY MoveInspect HF HR 3D measurement of dynamic processes Areas of application In order to sustain its own
More informationHow To Program A Laser Cutting Robot
Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment Robotic laser cutting Overview Allows for the increased
More information