Glass & Glazing. Showcase & Display

Transcription

1 Glass & Glazing Showcase & Display Shelf Brackets... Shelf Supports... 4 Shelf Rail... 7 Shelf Stripping... 8 Bracket Accessories... 9 Sliding Showcase System Sliding Glass Tracks LS Series Cabinet Locks... 1 Clip - Glass Door Hinge Glass Door Stereo Hinge Striker Plates Magnetic Catches Catches Door/Drawer Bumpers Q

2 Showcase & Display Hardware Shelf Brackets Aladino Shelf Bracket Adjustable to suit 6mm to 6mm glass / material Height = 66mm, Width = 56mm, Depth = 160mm Designed to take up to 300mm wide shelves Bright Chrome Satin Chrome Shelf Gripper Maximum shelf width 50mm Adjustable to suit from 6mm to 0mm glass / material Sold per pair Brush Nickel/Satin Chrome Bright Chrome Square Shelf Gripper Suitable for Glass and other materials between 4-18mm thickness Attractive and contemporary square design Small size: 56.5 x 46.5 mm Length Height Satin Chrome 80mm 6mm Brushed Nickel 80mm 6mm RMC5 Shelf Bracket Suits up to 10mm glass 9mm x 50mm Bright Chrome Satin Chrome Bright Gold Q : Dimension data and specifications may change without notification.

3 Shelf Brackets RMC11 Shelf Bracket Suits up to 1mm glass 30mm x 3mm Bright Chrome Satin Chrome Bright Gold RMC6 Shelf Bracket Suits up to 10mm glass 0mm x 5mm Bright Chrome Satin Chrome Bright Gold Glass Shelf Rail Fasten directly into wall with one fixing hole Glass sits on glass shelf rail with (non skid) rubber O-rings Includes lag bolt and fittings Accentric for adjustment to level Length Brushed Nickle 00mm Shelf Brackets Spring loaded / adjustable width from 10mm to 165mm Sold in pairs Includes fasteners Chrome Plated Q :

4 Showcase & Display Hardware Shelf Supports Solid Brass Shelf Support Pin ø 6mm pin Use insertion sleeve below ( ) for drilling holes above ø 8mm 1000 per box Solid Brass Nickel Plated Solid Brass Insertion Sleeve Use with solid brass support pin ( ) Use when drilling holes is above ø 8mm 1000 per box Bore Hole Solid Brass Ø 8mm Nickel Plated Ø 8mm Shelf Support - No per box Bore Hole Nickel Plated Ø 7mm Shelf Support - DUPLO 1000 per box 5 16 Bore Hole Nickel Plated Ø 5mm Q : Dimension data and specifications may change without notification.

5 Shelf Supports Shelf Retaining Clip For insertion into 5mm drilling holes 1000 per box Clear Plastic Shelf Support - with Metal Pin Plastic housing/metal pin Insert into ø 5mm drilling hole 1000 per box White Plastic Brown Plastic Clear Plastic Plastic Support 1000 per box Bore Hole White Plastic Ø 5mm Q : 5

6 Showcase & Display Hardware Shelf Supports Shelf Support - with Inbuilt Retainer Clip 100 per box White Plastic Shelf Stud - Nail-on Nail insertion 100 per box White Plastic Stay Bracket White powdercoated Dimensions 00mm x 00mm White mm x 50mm White mm x 300mm White A 350mm x 350mm White mm x 500mm White Q : 6 Dimension data and specifications may change without notification.

7 Shelf Rail EZI-SHELF Glass Shelf Support Fasten Ezi-Shelf directly into wall studs, especially for heavier load applications Suits up to 8mm glass Sold in length Length Black.4m EZI-SHELF End Cap To suit Ezi-Shelf glass shelf support ( ) Push in ends Sold as pair Black Plastic EZI-SHELF Timber Shelf Support Suits 16mm thick timber board Sold in length Length White 3.6m Black 3.6m Shown with caps installed EZI-SHELF End Cap Suits EZI-SHELF timber shelf suport Sold per pair White Black STIFF N SHELF Support Rail Reduces sagging shelves Suits 16mm thick timber board Ideal for pantries and wardrobe systems Sold in length Length White 4m Q :

8 Showcase & Display Hardware Shelf Stripping Double Slot Stripping Use 8 gauge countersunk screws to install Length Chromate 1800mm White 1800mm White 400mm Single Slot Stripping Use 8 gauge countersunk screws to install Length Chromate 1819mm Chromate 100mm Chromate 400mm White 600mm White 1000mm A White 100mm White 1400mm White 1819mm White 14mm White 400mm Shelf Stripping Brackets - Lug Length Chromate 150mm Chromate 00mm Chromate 50mm Chromate 300mm White 150mm White 00mm White 50mm White 300mm Shelf Stripping Brackets - 3 Lug Length Chromate 350mm Chromate 400mm Chromate 450mm White 350mm White 400mm White 450mm White (4LUG) 500mm Q : Dimension data and specifications may change without notification.

9 Bracket Accessories End Clip Suits shelf stripping system Add grommet below when using with glass shelf Clear Plastic Centre Clip Suits shelf stripping system Add grommet below when using with glass shelf Clear Plastic Grommet Suits shelf stripping system for glass shelves Clear Plastic Q :

10 Showcase & Display Hardware Sliding Showcase System Aluminium Track and Fittings Description Length Top Guide 3.6m Clear Anodised Bottom Rail 3.6m Clear Anodised Bottom Track 3.6m Clear Anodised End Cap suit Bottom Rail Black End Cap suit Bottom Rail Silver Glazing Vinyl Roll (40m) Clear Glazing Vinyl Per metre Clear Showcase Pile Per metre Black MT Showcase Pile Roll (915m) Black Adjustable Roller with screw Stainless Steel Finger Pulls - suit 5-6mm glass(1mm hole) Chrome Showcase Lock (Left Hand) Chrome Showcase Lock (Right Hand) Chrome Showcase Lock (Non-Handed) Chrome Showcase Sliding Lock (Key Alike) Chrome Showcase Sliding Lock (Key To Differ) Chrome Deductions Glass Height = Opening Height less 36mm Glass Width = Opening Width divided by, plus Overlap Top Guide Bottom Rail Bottom Track End Cap Roller Glazing Vinyl Finger Pulls Showcase Pile Showcase Lock (Left hand pictured) Showcase Lock (Right hand pictured) Showcase Lock (Non-handed) Showcase Sliding Lock Q : 10 Dimension data and specifications may change without notification.

11 Sliding Glass Tracks PVC Tracks - Top and Bottom TRACKS [SOLD SEPARATELY] Description Channel Length es Top Track 4mm 3.6m White Bottom Track 4mm 3.6m White mm Top Track 4mm 3.6m Brown Bottom Track 4mm 3.6m Brown Top Track 5mm 3.6m White Bottom Track 5mm 3.6m White mm Top Track 5mm 3.6m Brown Bottom 5mm 3.6m Brown Top Track 6mm 3.6m White Bottom Track 6mm 3.6m White mm Top Track 6mm 3.6m Brown Bottom Track 6mm 3.6m Brown Q : 11

12 Showcase & Display Hardware LS Series Cabinet Lock Cam Lock - Fixed Barrel Ideal for roller drawers and cupboards 90 rotary cam movement, convertible Key removable in lockable & unlockable positions Zinc alloy die cast Key to differ Description max.board key.no 16mm suit 6mm mm suit 18mm mm suit mm mm suit mm mm suit mm mm suit mm mm 16mm 4mm CYLINDER HOUSING LENGTH mm Single Glass Door Lock Ideal for single glass door cabinets Cylinder Housing also functions as handle Two lengths available for various glass thicknesses Easy installation, no glass drilling required Set includes: 1 lock housing, 1 strike plate, screws Barrel ordered seperately - see Q:13 Description 4-7mm Glass Thickness mm Glass Thickness Double Glass Door Lock Ideal for double glass door cabinets Cylinder Housing also functions as handle Two lengths available for various glass thicknesses Easy installation, no glass drilling required Set includes: 1 lock housing, 1 strike plate, screws Barrel ordered separately - see Q:13 Description 4-7mm glass thickness mm glass thickness Q : 1 Dimension data and specifications may change without notification.

13 LS Series Cabinet Lock Removable Barrel and Key Suits Cyber Lock, removable barrel housing range *Denotes new extended range Qty 00 Description Key Number LS Series Removable Barrel Key Number 00 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 006 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 010 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 014 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 018 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 0 * LS Series Removable Barrel Key Number 04 * LS Series Removable Barrel Key Number 06 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 030 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 034 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 038 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 04 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 046 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 050 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 054 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 058 * LS Series Removable Barrel Key Number LS Series Removable Barrel Key Number 06 * LS Series Removable Barrel Key Number 064 * LS Series Removable Barrel Key Number 066 * LS Series Removable Barrel Key Number 068 * LS Series Removable Barrel Key Number 070 * LS Series Removable Barrel Key Number 07 * LS Series Removable Barrel Key Number 074 * LS Series Removable Barrel Key Number 076 * LS Series Removable Barrel Key Number 078 * LS Series Removable Barrel Key Number 080 * LS Series Removable Barrel Key Number 08 * LS Series Removable Barrel Key Number 084 * LS Series Removable Barrel Key Number 086 * LS Series Removable Barrel Key Number 088 * LS Series Removable Barrel Key Number 090 * LS Series Removable Barrel Key Number 09 * LS Series Removable Barrel Key Number 094 * LS Series Removable Barrel Key Number 096 * LS Series Removable Barrel Key Number 098 * LS Series Removable Barrel Keyed to Differ LS Series Removable Barrel Key Number 10 * Note: Not all barrels are located in all areas. Please allow up to 7 working days for delivery. Q : 13

14 Showcase & Display Hardware CLIP Glass Door Hinge Product Description Glass door hinge 94 opening angle With closing mechanism (spring) Tool free door to carcass assembly and removal 3-dimensional adjustment (with suitable mounting plate) For glass thickness from 4.5mm to 7mm Boss fixing screws are included Application Hinge Order Specification Overlay application (lay-on door) Dual or twin application Inset application Boss: Screw-on Boss: Screw-on Boss: Screw-on Nylon boss with spring 75M Steel boss with spring 75M Steel boss with spring 75M Cruciform Two-Part Mounting Plate Material: zinc die-cast : nickel plated Fixing with 3.5mm and 4mm chipboard screws With height adjustment ± mm Recommended screw length 17mm Spacing 0mm 3mm 9mm Height 8.5mm 11.5mm 17.5mm Qty 50 Qty H H H Height *Fix with additional screw if used with wide angle hinges Cover Caps Plain Steel nickel plated Chrome (Polish) Black (Matt) Gold (Polish) Individually printed from 1000 pcs up Q : 14 Dimension data and specifications may change without notification.

15 Installation dimensions Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0mm) Hinge and door protrusion at full opening angle Gap Gap Gap Set mounting plate back by glass thickness and height of cover cap Door overlay: Drilling distance Door overlay: Drilling distance Door overlay: Drilling distance Mounting plate spacing Mounting plate spacing Mounting plate spacing Minimum gap requirement in mm based on doors with radiused edges (R = 1mm) Adjustments Minimum gap requirement dependent on glass thickness and drilling distance (5.5mm - 7mm) For glass thicknesses from 4.5 to 7mm no gap is required max ± 3mm see mounting plates - 3.5mm +0.5mm + 3mm - 1mm Screw-on Cover cap dimensions Q : 15

16 Showcase & Display Hardware Glass Door Stereo Hinge U - Shape Hinge Ideal for glass door entertainment and stereo unit cabinets Screw to tighten glass into position Fittings include threaded bracket with pin, pin receiver and screws with soft end suitable for glass (do not overtighten) Qty Black Pair Qty 50 Glass Door Striker Plate Suitable for glass door 5-6mm No grip Includes self adhesive gasket Qty 100 Width x Height Black 40mm x 4.5mm Magnetic Catch - Single Suitable for glass doors/cabinet doors Black Plastic Magnetic Catch - Double Suitable for glass doors/cabinet doors Black Plastic Q : 16 Dimension data and specifications may change without notification.

17 Striker Plates Striker Plate Nickel Plated Touch Striker Plate - Round To suit magnetic catches - single and double when using timber doors Diameter Steel 15mm Magnetic Catches Magnetic Catch Includes striker plate (not shown) Hold Capacity White Plastic 4kg Brown Plastic 4kg White Plastic 6kg Brown Plastic 6kg Magnetic Catch Floating steel counterpiece striker plate with screw nail hole / 3mm centre to centre 5mm knock in pins White Plastic Q : 17

18 Showcase & Display Hardware Catches Single Ball Catch Bore Hole Ø C/C Brass 10mm 0mm Brass 13mm 30mm Diagram for 10mm catch Double Ball Catch Adjustable tension on ball bearings Length Brass 43mm Brass 50mm Elbow Catch - No.303 Brass Double Roller Catch 3kg pull capacity with diamond strike plate Nickel/Steel Q : 18 Dimension data and specifications may change without notification.

19 Door / Drawer bumpers Bumper - Small Dampens noise of closing drawers and cabinet doors Adhesive application High bonding adhesive Qty Height 450 per card.mm Clear Bumper - Medium Dampens noise of closing drawers and cabinet doors Adhesive application Qty Height 00 per card 3.5mm Clear per card 3.5mm White Door Buffer Reduces noise of closing drawers and cabinet doors Adhesive application Qty Height 11 per card 5mm Clear Q : 19

20 Transport and Marine Industries Lincoln Group Industrial Products Division offers a comprehensive range of Foam Adhesive, Acoustic and Thermal Products, including slitting and die-cutting facilities for custom size bulk orders. Also available is our range of Gas-Struts, Compression Locks and Cam Lock Sets for the heavy vehicle bodymaking industry. Contact your local Lincoln Group s branch or further product information. refer to Section U of the Trade Product Guide