40 (1.57) 34.1 (1.34) 15.9 (.63) 33.3±3.2 (1.31±.13) 1.6 (.06) Single point installation. Three point installation

Transcription

1 Cam Latch Small Flush handle Cup style Adjustable grip Low profile design ABS, zinc and steel, zinc plated Performance Details Max. static load: 160 N (35 lbf) Flammability rating: UL94-HB Notes For multi-point latching options see pages For fixed grip version see pages Type A (shown) Ø 49.2 (1.94) 4.8(.19) Ø 42.9±0.4 (1.69±.02) 33.3±3.2 (1.31±.13) 40 (1.57) 15.9 (.63) Door thickness 0.8 (.03) Min (.38) Max (1.34) Frame Edge of door 25.4 (1.00) 1/4-28 UNF Studs Ø 3.18 (.125) Grip range 0 (0) Min. - Max. ACTUAL SIZE 1.6 (.06) Single point Type A (Turn handle clockwise to latch) Type B (Turn handle counter-clockwise to latch) Three point Handle shown Handle shown Mounted on either type A or B doors. Choose horizontal or vertical closed position of handle Part Number Selection R - F F Finish 10 Bright chrome 65 Black R Rotation 1 Type B counter-clockwise to latch for 2 Type B counter-clockwise to latch for 1 Type A clockwise to latch for 2 Type A clockwise to latch for Dimensions in millimeters (inch) unless otherwise stated

2 01 Cam Latch Medium Flush and bail handle Cup style Adjustable grip 109 Ø 82.6 (3.25) Type A (Turn handle clockwise to latch) Handle shown 22.1 (.87) 4.8 (.19) 38.9 (1.52) Type B (Turn handle ACTUAL counter-clockwise SIZE to latch) Handle shown Mounted on either type A or B doors. Choose horizontal or vertical closed position of handle Lock assembly (optional) 21.3 (.84) Type A (shown) Ø (Ø ) ( ) ±0.4 (2.25±.02) Hole for lock (Prepare only when using key lock assemblies) Door thickness: without lock 0.8 (.03) Min (.38) Max. with lock 1.6 (.06) Min (.31) Max (1.50) 19.1 (.75) 6.4±0.1 (.25±.005) 3/8-24 UNF 50.8±3.2 (2.00±.13) 2.5±0.2 (.10±.01) G Studs Ø 4.75 (.187) Grip range Frame Edge of door Ø 71.4±0.4 (2.81±.02) Low profile design ABS, zinc and steel, zinc plated Performance Details Max. static load: 220 N (50 lbf) Flammability rating UL94-HB Keys See page 98 Notes For multi-point latching options see pages For fixed grip version see pages Three point Single point Two point Part Number Selection L Lock style 1 Non-locking flat handle 2 Non-locking folding bail handle 3 Locking flat handle keyed alike CH751 (two keys supplied) 4 Locking folding bail handle keyed alike CH751 (two keys supplied) G Grip Grip Range Type A Type B Cam Type 01 - L 3 - G F F Finish 1 Bright chrome 5 Black (flat handle only) (0 -.50) Perpendicular Parallel three point latching (0 -.50) Parallel Perpendicular three point latching ( ) Perpendicular Parallel three point latching ( ) Parallel Perpendicular three point latching 5 Two point only Perpendicular Parallel Two point only 6 Two point only Parallel Perpendicular Two point only Dimensions in millimeters (inch) unless otherwise stated

3 Southco 01 Cam Latch Flush Cam Latches Snap-in Attractive styling Accomodates 3 point latching Optional key lock Left of right hand actuation 20 (.79) 11.7 (.46) 3.5 (.14).06 MAX PANEL LOCK PLUG Ø89 (3.50) 69.5 (2.74) 2X ROD PINS Ø5 (.20) HANDLE: Die-cast zinc, gray powder coating HOUSING: ABS, black TRIM and RETAINER: Stainless steel LOCK PLUG: Die-cast zinc with brass wafer and stainless steel trim CAM, CAM CLIP, WAVE, and WASHER MOUNTING SCREW: Steel, nickel plate COUNTER- CLOCKWISE TO LATCH CLOCKWISE TO LATCH 26.1 (1.03) 36 (1.42) PART NUMBERS LOCKING* NON-LOCKING * 2 flat keys on a ring supplied with locking version, CH751 key code. Additional key codes available upon request. Panel Preparation PANEL 72.4 (2.850) 49.5 (1.949) 24.8 (.976) FRAME 72.4 (2.850) 49.5 (1.949) millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. 40 Refer to our Southco 2003 Handbook or visit for expanded product listings.

4 Southco Pawl/Cam Action Latches Flush Cup Series Flush/low profile on the surface, minimal inside protrusion Use with single-, 2-, or 3-point latching (See pages 160 to 164) Two sizes Keylocking version available in the mid-size version Choice of Flat or Bail handle in the mid-size version Small Mid-size Shown Actual Size HOUSING, ACTUATOR, PAWL, and PAWL FOOT: 1010 Steel, zinc plate, chromate STUDS, NUTS and PAWL SCREW: Steel, zinc plate, chromate LOCKWASHERS: Spring steel, zinc plate, chromate PIN: 303 Stainless steel, passivated. SMALL SIZE HANDLE: ABS chrome plated or black SHAFT: Low carbon steel, zinc plate, chromate CUP: 1010 Steel, chrome plated or black powder coating MID SIZE HANDLE: ABS chrome plated or black SHAFT: Low carbon steel, zinc plate, chromate CUP: 304 Stainless steel, electropolished, or 1010 steel black powder coating WASHER: Nylon, natural. LOCK HOUSING: Die-cast zinc, chrome plated or black powder coating LOCK PLUG: Die-cast zinc and brass, chrome plated or black powder coating LOCK HOUSING NUT: Die-cast zinc, chemical protective film. LOCK PAWL: 1010 Steel, zinc plate, chromate LOCK PAWL SCREW: 303 Stainless steel, passivated. MID SIZE BAIL HANDLE HANDLE: Die-cast zinc, chrome plated. SHAFT: Low carbon steel, chrome. CUP: 304 Stainless steel, electropolished. WEAR WASHER: 302 Stainless steel, passivated. U-BENT WASHER: Spring steel, zinc plate, chromate WASHER: Nylon, natural. LOCK HOUSING: Die-cast zinc, chrome plated or black powder coating LOCK PLUG: Die-cast zinc and brass, chrome plated or black powder coating LOCK HOUSING NUT: Die-cast zinc, chemical protective film. LOCK PAWL: 1010 Steel, zinc plate, chromate LOCK PAWL SCREW: 303 Stainless steel, passivated. Pawl/Cam Action Latches Choose single-, two-, or three-point latching. (Turn handle counterclockwise to latch). (Turn handle clockwise to latch). Rods For 2 and 3 point (ordered separately). For Small Size Assembly: MAX. width of flat= 7.9 (.31) MAX. thickness of flat= 4.8 (.19) SINGLE-POINT INSTALLATION THREE-POINT INSTALLATION Thickness For Mid Size Assembly: MAX. width of flat= 15.9 (.63) MAX. thickness of flat= 4.8 (.19) TWO-POINT INSTALLATION Handle shown to edge of door when latched. Handle shown to edge of door when latched. Mounted on either or B doors. Choose horizontal or vertical closed position of handle. millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. Width See pages 160 to 164 for more information. 95

5 Pawl/Cam Action Latches Southco Pawl/Cam Action Latches Flush Cup Series (Small version shown) LOCK ASSEMBLY (OPTIONAL) Mid-sizeVersion Only 4.8 (.19) E F ØA H H S G R C GRIP RANGE STUDS Ø J LATCH SIZE Small Mid-size Flush & Bail Handle ØA 49.2 (1.94) 82.6 (3.25) C Radius 40 (1.57) LATCH DIMENSIONS E F G H ØJ R 34.1 (1.34) 38.9 (1.52) 21.3 (.84) 19.1 (.75) 3.18 (.125) 4.75 (.187) 15.9 (.63) 22.1 (.87) S (UNF) 1/4-28 3/8-24 SIZE GRIP RANGE TYPE OF ASSEMBLY Handle position when latched relative to edge of door BRIGHT FINISH BLACK FINISH Small Three Mid-Size (1.13) Three with lock Three Mid-Size Bail Handle (1.13) Three with lock *Locks are keyed alike. Different key codes are available. Contact Southco for details. Pawl is not included with two-point assemblies. 96 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

6 Panel Preparation FRAME EDGE OF DOOR P For Turn handle counterclockwise to latch K L ØM N Ø (Ø ) ( ) HOLE FOR LOCK Prepare only when using key lock assemblies N ØM K L P FRAME EDGE OF DOOR For Turn handle clockwise to latch Installation INSTALLATION SHOWN: For : 1. Rotate housing and pawl sub-assembly 180 around axis of shaft. 2. Rotate handle, shaft sub-assembly and actuator sub-assembly 90 around axis of shaft. If lock assembly is used, remove hex nut from lock and angle LOCK PAWL through the hole, then drop hex nut back over lock pawl. Slide lock pawl through slot in housing (bend lock pawl if necessary) and tighten hex nut. Pawl/Cam Action Latches SIZE SMALL MID-SIZE K L (TYP.) Ø M N P (TYP.) 33.3 ± 3.2 (1.31 ±.13) 50.8 ± 3.2 (2.00 ±.13) 4.8 (.187) 6.4 ± 0.1 (.250 ±.005) 42.9 ±.40 (1.687 ±.015) 71.4 ± 0.4 (2.812 ± 0.15) ± 0.4 (2.250 ±.015) 1.6 (.062) 2.5 ± 0.2 (.10 ±.01) Pawl Installation HANDLE/SHAFT SUB-ASSEMBLY PANEL THICKNESS For small and mid-size assemblies without lock: 0.8 (.03) MIN.; 9.5 (.38) MAX. For assemblies with lock: 1.6 (.06) MIN.; 7.9 (.31)MAX. SLOT FOR LOCK PAWL CUP Pawl Sub- Assembly (Mid-Size short grip pawl shown) HOUSING *THIN NYLON WASHER (For Midsize) For single or three-point latching (shown here for Mid-Size Assembly). THICK For twopoint latching Actuator Sub- Assembly (Mid-Size shown) ROD (Order separately) LOCKWASHER Tighten securely with wrench THICK for single or three-point latching. THIN for twopoint latching. SMALL Assembly Performance Guidelines LOAD MID-SIZE (long grip shown) (To assist in your product selection; samples are available for your evaluation.) Flammability Rating for Small and Mid-size Handles: UL94 - HB Operating Temperature Range: For Small & Mid Size : -20 C (0 F) to 60 C (140 F) millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. 97