Stonetown High Performance Butterfly Valves
|
|
|
- Pierce Shields
- 7 years ago
- Views:
Transcription
1 Stonetown High Performance Butterfly Valves The Best Source For Quality & Price Manual and Automated Valve Solutions
2 2 High Performance Butterfly Valve STHW STHL Size : 3 ~ 12 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material: Cast Steel and Stainless Steel Seat Material: Soft Seat (PTFE / RTFE), Metal Seat ( / 304) Operation: Lever, Gear Drilling: ANSI 150, JIS 10/16K, DIN PN 10/16 ANSI 300, JIS 20/ 30K, DIN PN 25/ 40. Tight shut-off design. One - piece body materials are either cast steel or stainless steel for excellent corrosion resistance. High strength one-piece stem in A564 Gr.630 materials. ISO 5211 mounting pad with square shaft permits direct mount actuation for both Manual (Lever & gear), pneumatic and electric actuators. Double off-set configuration with conical angled disc design. Maximize flow and minimize resistance providing high Cv. Seat available in either Soft (PTFE / RTFE) or Metal ( / 304). Both soft seats and Metal seats are interchangeable. Gland Flange preventing uneven load distribution against packing. Internal travel stop design to prevent over travel of the disc. Minimizing possible seat damage. Retainer ring surface finish is 125 to 200 AARH and is compatible with both standard gasket and spiral wound gasket designs. Outside diameter is recessed within gasket sealing surface to prevent external leakage. The heavy duty handle and 10 position notch plates allow for positioning the valve disc to precise angle stops. Valve Rating: Top flange mounting pad: ISO 5211 Basic Design: API 609, MSS-SP-68, BS 5155, ISO 5752 Shell/Seat Test: API 598, MSS-SP-61 Seat Hydro: Class 150 (360 psig) Class 300 (740 psig)
3 HIGH PERFORMANCE BUTTERFLY VALVE 3 Model : STHW Wafer Type STHL Lug Type Note : Dimension Class 150 : ANSI 150, JIS 10/16K, DIN PN 10/16 Class 300: ANSI 300, JIS 16/20/30K, DIN PN 25/40 Material Q'ty 1 Body A216 WCB / A351 CF8M 1 2 Disc A351 CF8M 1 3 Stem A 564 Gr Gland Flange A216 WCB / A351 CF8M 1 5 Packing Retainer A276 Tp Retainer Ring A351 CF8M 1 7 Seat PTFE / RTFE / / Top Retainer A283D - A36 / A276 Tp Grand Packing Graphite 3 10 Upper Bearing R.TFE + 316SS 1 11 Lower Bearing R.TFE + 316SS 1 12 Disc Pin A276 Tp Hex Socket Bolt A283D - A36 / A SS 4 ~ Spring Washer A283D - A36 / A SS 2 15 Hex Nut A283D - A36 / A SS 2 16 Stud Bolt A283D - A36 / A SS 2 17 Flat Head Screw A283D - A36 / A SS 2
4 4 Model : STHW Wafer Type, Class Body 2 Disc 3 Stem 4 Gland Flange 5 Packing Retainer 6 Retainer Ring 7 Seat 8 Top Retainer 9 Grand Packing 10 Upper Bearing 11 Lower Bearing 12 Disc Pin 13 Hex Socket Bolt 14 Hex Nut & S/W 15 Stud Bolt 16 Flat Head Screw Dimension (mm) (inch) 3" " " " " " "
5 HIGH PERFORMANCE BUTTERFLY VALVE 5 Model : STHW Wafer Type Class 150 Material Selection & Drilling material Selection #150 CS-STHW #150 SS-STHW SOFT SEAT METAL SEAT SOFT SEAT METAL SEAT Q'ty 1 Body A 216 WCB A 351 CF8M 1 2 Disc A 351 CF8M 1 3 Stem A 564 Gr Gland Flange A 216 WCB A351 CF8M 1 5 Packing Retainer A276 Tp Retainer Ring A351 CF8M 1 7 Seat PTFE / RTFE PTFE / RTFE A240 Tp 304 A240 Tp Top Retainer A283D-A36 A276 Tp Grand Packing GRAPHITE 3 10 Upper Bearing R.TFE+316SS 1 11 Lower Bearing R.TFE+316SS 1 12 Disc Pin A 276 Tp Hex Socket Bolt A283D-A36 A SS 4 ~ Spring Washer A283D-A36 A SS 2 15 Hex Nut A283D-A36 A SS 2 16 Stud Bolt A283D-A36 A SS 2 17 Flat Head Screw A283D-A36 A SS 2 Drilling ANSI 150 JIS 10K JIS 16K PN 10 PN 16 mm B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h ANSI 150 JIS 10K JIS 16K PN 10 PN 16 inch B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h 3" " " " " " "
6 6 Model : STHW Wafer Type, Class Body 2 Disc 3 Stem 4 Gland Flange 5 Packing Retainer 6 Retainer Ring 7 Seat 8 Top Retainer 9 Grand Packing 10 Upper Bearing 11 Lower Bearing 12 Disc Pin 13 Hex Socket Bolt 14 Hex Nut & S/W 15 Stud Bolt 16 Flat Head Screw Dimension (mm) (inch) 3" " " " " " "
7 HIGH PERFORMANCE BUTTERFLY VALVE 7 Model : STHW Wafer Type Class 300 Material Selection & Drilling material Selection #300 CS-STHW #300 SS-STHW SOFT SEAT METAL SEAT SOFT SEAT METAL SEAT Q'ty 1 Body A 216 WCB A 351 CF8M 1 2 Disc A 351 CF8M 1 3 Stem A 564 Gr Gland Flange A 216 WCB A351 CF8M 1 5 Packing Retainer A276 Tp Retainer Ring A351 CF8M 1 7 Seat PTFE / RTFE PTFE / RTFE A240 Tp 304 A240 Tp Top Retainer A283D-A36 A276 Tp Grand Packing GRAPHITE 3 10 Upper Bearing R.TFE+316SS 1 11 Lower Bearing R.TFE+316SS 1 12 Disc Pin A 276 Tp Hex Socket Bolt A283D-A36 A SS 4 ~ Spring Washer A283D-A36 A SS 2 15 Hex Nut A283D-A36 A SS 2 16 Stud Bolt A283D-A36 A SS 2 17 Flat Head Screw A283D-A36 A SS 2 Drilling ANSI 300 JIS 16K/20K JIS 30K PN 25 PN 40 mm B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h ANSI 300 JIS 16K/20K JIS 30K PN 25 PN 40 inch B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h 3" " " " " " "
8 8 Model : STHL Lug Type, Class Body 2 Disc 3 Stem 4 Gland Flange 5 Packing Retainer 6 Retainer Ring 7 Seat 8 Top Retainer 9 Grand Packing 10 Upper Bearing 11 Lower Bearing 12 Disc Pin 13 Hex Socket Bolt 14 Hex Nut & S/W 15 Stud Bolt 16 Flat Head Screw Dimension " mm" " inch" 3" " " " " " "
9 HIGH PERFORMANCE BUTTERFLY VALVE 9 Model : STHL Lug Type, Class 150 Material Selection & Drilling material Selection #150 CS-STHL #150 SS-STHL SOFT SEAT METAL SEAT SOFT SEAT METAL SEAT Q'ty 1 Body A 216 WCB A 351 CF8M 1 2 Disc A 351 CF8M 1 3 Stem A 564 Gr Gland Flange A 216 WCB A351 CF8M 1 5 Packing Retainer A276 Tp Retainer Ring A351 CF8M 1 7 Seat PTFE / RTFE PTFE / RTFE A240 Tp 304 A240 Tp Top Retainer A283D-A36 A276 Tp Grand Packing GRAPHITE 3 10 Upper Bearing R.TFE+316SS 1 11 Lower Bearing R.TFE+316SS 1 12 Disc Pin A 276 Tp Hex Socket Bolt A283D-A36 A SS 4 ~ Spring Washer A283D-A36 A SS 2 15 Hex Nut A283D-A36 A SS 2 16 Stud Bolt A283D-A36 A SS 2 17 Flat Head Screw A283D-A36 A SS 2 Drilling ANSI 150 JIS 10K JIS 16K PN 10 PN 16 mm B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h /8" M M M M /8" M M M M /4" M M M M /4" M M M M /4" M M M M /8" M M M M /8" M M M M24 ANSI 150 JIS 10K JIS 16K PN 10 PN 16 inch B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h 3" /8" M M M M16 4" /8" M M M M16 5" /4" M M M M16 6" /4" M M M M20 8" /4" M M M M20 10" /8" M M M M24 12" /8" M M M M24
10 10 Model : STHL Lug Type, Class Body 2 Disc 3 Stem 4 Gland Flange 5 Packing Retainer 6 Retainer Ring 7 Seat 8 Top Retainer 9 Grand Packing 10 Upper Bearing 11 Lower Bearing 12 Disc Pin 13 Hex Socket Bolt 14 Hex Nut & S/W 15 Stud Bolt 16 Flat Head Screw Dimension (mm) (inch) 3" " " " " " "
11 HIGH PERFORMANCE BUTTERFLY VALVE 11 Model : STHL Lug Type, Class 300 Material Selection & Drilling material Selection #300 CS-STHL #300 SS-STHL SOFT SEAT METAL SEAT SOFT SEAT METAL SEAT Q'ty 1 Body A 216 WCB A 351 CF8M 1 2 Disc A 351 CF8M 1 3 Stem A 564 Gr Gland Flange A 216 WCB A351 CF8M 1 5 Packing Retainer A276 Tp Retainer Ring A351 CF8M 1 7 Seat PTFE / RTFE PTFE / RTFE A240 Tp 304 A240 Tp Top Retainer A283D-A36 A276 Tp Grand Packing GRAPHITE 3 10 Upper Bearing R.TFE+316SS 1 11 Lower Bearing R.TFE+316SS 1 12 Disc Pin A 276 Tp Hex Socket Bolt A283D-A36 A SS 4 ~ Spring Washer A283D-A36 A SS 2 15 Hex Nut A283D-A36 A SS 2 16 Stud Bolt A283D-A36 A SS 2 17 Flat Head Screw A283D-A36 A SS 2 Drilling ANSI 300 JIS 16K / 20K JIS 30K PN 25 PN 40 mm B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h /4" M M M M /4" M M M M /4" M M M M /4" M M M M /8" M M M M " M M M M " M M M M30 ANSI 300 JIS 16K / 20K JIS 30K PN 25 PN 40 inch B.C.D n h B.C.D n h B.C.D n h B.C.D n h B.C.D n h 3" /4" M M M M16 4" /4" M M M M20 5" /4" M M M M24 6" /4" M M M M24 8" /8" M M M M27 10" " M M M M30 12" " M M M M30
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
FlowPak TM General Application Valve 1/2-4, Class 150
FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Packing and gaskets Page 029 of 040
Packing and gaskets Page 029 of 040 7.3 Packing and gaskets The chemical industry has carried out cadastral surveys for many years. These surveys provide valuable information regarding environmental pollution
Crane Cast Steel Valves
Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
Valdisk Control Valves
Valdisk Control Valves Control Valves Compact, field reversible actuator Jam-lever Toggle soft seal ANSI Class IV shutoff metal seal ANSI Class VI shutoff soft seal Non-selective disc and shaft for reduced
Trunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Aprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
G. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize hinge and stop pins, preventing vibration and wear.
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
BIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Triple Eccentric Metal Seated Valves MV Series
Triple Eccentric Metal Seated Valves MV Series The Power to Perform. Orton is part of IMI UK - Severe Service Division, a leading supplier of specialty flow control products, with a presence on each continent.
Fisher 8532 High-Performance Butterfly Valve
Instruction Manual 8532 Valve Fisher 8532 High-Performance Butterfly Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation...
Fisher CV500 Rotary Globe Control Valve
Instruction Manual CV500 Valve Fisher CV500 Rotary Globe Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 3 Maintenance...
Fisher 249 Caged Displacer Sensors
Instruction Manual 249 Caged Sensors Fisher 249 Caged Displacer Sensors Contents Introduction... 1 Scope of Manual... 1... 2 Type Number... 3 Educational Services... 4 Maintenance... 4 Cleaning the Cage...
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
F-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
GS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
API 6D. Trunnion Mounted Ball Valves. Delta Pacific Valve Mfg. Co. New York, U.S.A.
API 6D Trunnion Mounted Ball Valves Delta Pacific Valve Mfg. Co. New York, U.S.A. TABLE OF CONTENTS Page Title Page Title 1 Table of Contents / How To Order 13 Flange Dimensions ANSI Class 150/300 2 Company
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
MADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
Metal Seated Ball Valves
Tech Bulletin Page 130-11 Metal ed Ball Valves Engineered Valves for Severe Service Reliability with Innovative Process Solutions Severe Series Extreme Series Shut-Off Class IV, V & VI Automated Metal
Spiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
Fire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology