Ball Valves F14 / F14D
|
|
|
- Dominick Woods
- 7 years ago
- Views:
Transcription
1 T h e r e l i a b l e b r a n d Ball Valves F14 / F14D DIN Full Bore, Floa ng Ball, 2-piece body KITZ CORPORATION OF EUROPE S.A.
2 Ball Valves Floa ng Ball design Contents Pressure - Temperature Ra ngs 3 Class PN 16 Cast Iron Ball Valves (F14) 4 Class PN Carbon Steel Ball Valves (F14D) 6 Class PN Stainless Steel Ball Valves (F14D) 8 Actuator Moun ng Pad dimensions (F14D) 10 Applicable standards 11 KITZ Corpora on Headquarter, Chiba, Japan KITZ Corpora on of Europe, S.A., Barcelona Plant, Spain All products introduced in this cataloge are covered by ISO 9001 certification awarded KITZ Corporation of Europe, S.A. 2
3 Pressure-Temperature Ra ngs The pressure-temperature ra ngs of ball valves are determined, not only by valve shell materials, but more essen ally by sealing materials, used for ball seats, gland packing and gaskets. Sealing materials may be high molecule, or rubber, but the choice is limited by the characteris cs of the service fluid, working temperatures, working pressures, velocity of fluid, and opera onal frequency of valves. As it is very difficult to predetermine the exact pressuretemperature ra ng for all kind of fluids under all imaginable condi ons, we have prepared general ra ng charts for non-shock fluid service here, based on our past experiences both in the field and in our laboratory. In case of extraordinary service condi ons as men oned below, contact KITZ Corpora on of Europe or its distributors for technical advice: 1. Valves shall be le fully closed for a long period of me under high temperature or high differen al pressure. 2. Valves shall be frequently operated under high temperature or high differen al pressure. 3. Frequent change of line pressure or temperature. Virgin PTFE is the standard seat material for F14 and F14D series KITZ ball valves. Specify PTFE + Graphite or PTFE + Stainless Steel, PTFE + Glass Filled, etc. when required. F14 PN10-16 DN 15 ~ 200 F14D PN DN 15 ~ 300 Body Ra ng: Pressure resistance limita on for valve body 3
4 F14 - Class PN16 Cast Iron Ball Valves Full port, Split body, Side entry design Features An sta c device Blowout-proof stem High performance PTFE ball seats Standars: Design: EN ISO Thickness: ISO 7121 Flanges drilled: EN 1092 Flanges surfaces: EN 1092 Leak test: BS EN Class A & DIN 3230 Lengths : Distance between flanges as per EN DN 100 basic serie 14 DN 125 basic serie 15 Page 3 for Pressure-Temperature Ra ngs Page 5 for Construc on and Materials Features of PN16 F14 Valve Size DN Port L X P H Cv (m³/h) Torque PN16 (N.m) Weight (Kg) , , , , , , , , Gear opera on (1) 1 Cv = 1,16 Kv Gear Opera on 4 Class Valve Size (Dn) PN16 Gear Operator H P 1 B A Valve Operator Dn : lever opera on Dn : op onal gear box Dn 200 : gear box or lever (op onal) (1) Gear box included Worm gear operators may be mounted on KITZ ball valves at your op on for the smoothest valve opera on. Electric or pneuma c actuators are also op onally available. Contact KITZ distributors for appropriate choice and sizing of valve actuators.
5 Construc on and Materials No. Parts Standard PN 16 1 Body GG25 4 Body Connector GG25 5 An sta c Stem *1 ASTM A479 Type 316 / Gland Ring ASTM A479 Type Gland Flange Steel 8 Stop Pin Steel 9 Stop Plate Steel zinc plated 11 Gland Washer Blue Steel 12 Nut *5 DIN 267/3-8 blued 15 Elas c Ring Steel 16 Gland bolt Steel 17 Bolt - Stud Bolt *5 DIN 267/3/4 C8.8/8 blued / zinc plated 18 Nut *5 DIN 267/3/4 C8.8/8 blued / zinc plated 21 Ball *2 ASTM A479 Type 316 / / CA15 22 Ball Seat PTFE 24 Body Seal *4 PTFE / 316L+Flexite 25 Gland Packing *3 PTFE+C+Graphite / PTFE 26 Stem Seal *3 PTFE+C+Graphite / PTFE 30 Handle Steel coated 31 Handle head GGG40 32 Handle bar GGG40 33 Handle bar bolt Stainless Steel 34 Handle head bolt Stainless Steel Standard material configura on can be applied to sour service. *1 DN 50 : ASTM A479 Type 316 DN > 50 : ASTM A479 Type 410 *2 DN 32 : ASTM A479 Type < DN 50 : DIN DN > 50 : ASTM A217/A743 Gr. CA15 DIN (Op onal) *3 DN 25 : PTFE+C+Graphite DN > 25 : PTFE *4 DN 25 : PTFE DN > 25 : 316L+ Flexite *5 DN < 40 : DIN 267/3 C8.8 blued DN = 40 : DIN 267/3/4 C8.8/8 zinc plated DN > 40 : DIN 267/3 C8.8 blued Valve finish : phosphate and oil dipped. Opera on group: DN 150 : by lever. (100 ~150 op on: gear box) DN = 200 : by gear box or with lever (Op onal) DN 25 All part numbers are corresponding with those shown in valve assembly drawings. 5
6 F14D - Class PN Carbon Steel Ball Valves Full port, Split body, Side entry design Features An sta c device Blowout-proof stem High performance PTFE ball seats Actuator moun ng pad to ISO 5211 Standars: Design: EN 1983:2006 Thickness: EN Flanges drilled: EN 1092 Flanges surfaces: EN 1092 Leak test: BS EN Class A & DIN 3230 FSM: BS 6755 P2 Lengths: Distance between flanges as per EN DN 100 basic serie 14 (Short) DN 125 basic serie 15 (Short) - Serie 1 (Long) Page 3 for Pressure-Temperature Ra ngs Page 7 for Construc on and Materials Page 10 for Dimension of Actuator Moun ng Pad Dimensions of PN F14D 6 Valve Size DN Gear Opera on Class DN PN Valve Size (Dn) Port L X P H 100 Gear Operator H P 1 B A ISO 5211 Cv (m³/h) Torque (N.m) PN10-16 Weight (Kg) PN25-40 Short Long PN16 PN40 Short Long Short Long F ,6 2,8 2,6 2, F ,3 3,6 3,3 3, F ,3 4,5 4,3 4, F ,5 6,7 6,5 6, F ,8 7,9 7,8 7, F ,9 12,5 11,9 12, F ,1 15,5 16, F , (1) F ,6 34,5 40,2 125 (2) F F , Gear opera on F (4) (4) (3) Gear opera on F (4) (4) Gear opera on F (4) (4) - 1 Cv = 1,16 Kv *1 PN 25-40: Ball Bore=95 X= 85 H=190 *2 PN 25-40: P=750 *3 PN 25-40: H=396 *4 Gear Box included Valve Operator Dn : lever opera on Dn : op onal gear box Dn 200 : gear box or lever (op onal) Worm gear operators may be mounted on KITZ ball valves at your op on for the smoothest valve opera on. Electric or pneuma c actuators are also op onally available. Contact KITZ distributors for appropriate choice and sizing of valve actuators.
7 Construc on and Materials No. Parts Standard PN Body DIN Body Connector DIN An sta c Stem *1 ASTM A479 Type 316 / Gland Ring ASTM A479 Type Stop Pin Steel 9 Stop Plate Steel zinc plated 11 Gland Washer Steel zinc plated 12 Nut DIN 267/3-8 blued 17 Stud Bolt-Bolt DIN 267/3/4 C 8.8/8 / zinc plated 18 Nut DIN 267/3/4 C 8.8/8 / zinc plated 21 Ball *2 ASTM A479 Type 316/CA15 / DIN Ball Seat PTFE 24 Body Seal *4 PTFE / 316L+ Flexite 25 Gland Packing *3 PTFE+C+Graphite / PTFE 26 Stem Seal *5 PTFE+C+Graphite / PTFE 30 Handle Steel coated 31 Handle head GGG40 32 Handle bar GGG40 33 Handle bar bolt Stainless Steel 35 Bolt Steel 36 Washer Steel 40 Stem O ring FKM Standard material configura on can be applied to sour service. *1 DN 50 : ASTM A479 Type < DN < 250 : ASTM A479 Type 410 DN 250 : ASTM A479 Type 316 *2 DN 50 : ASTM A479 Type < DN < 250 : ASTM A217/A743 Gr. CA15 DIN (Op onal) DN 250 : DIN *3 DN 25 : PTFE+C+Graphite DN > 25 : PTFE Cod. FSM : Graphite (Op onal) *4 DN 25 : PTFE DN > 25 : 316L+ Flexite Cod. FSM : 316L+Graphite (Op onal) *5 DN 25 : PTFE+C+Graphite DN > 25 : PTFE Valve finish : phosphate and oil dipped. Opera on group : DN 150: by lever. (100 ~150 op on: gear box) DN = 200: by gear box or with lever (Op onal) DN > 200: by gear box. DN 25 All part numbers are corresponding with those shown in valve assembly drawings. 7
8 F14D - Class PN Stainless Steel Ball Valves Full port, Split body, Side entry design Features An sta c device Blowout-proof stem High performance PTFE ball seats Actuator moun ng pad to ISO 5211 Standars: Design: EN 1983:2006 Thickness: EN Flanges drilled: EN 1092 Flanges surfaces: EN 1092 Leak test: BS EN Class A & DIN 3230 FSM: BS 6755 P2 Lengths: Distance between flanges as per EN DN 100 basic serie 14 (Short) DN 125 basic serie 15 (Short) - Serie 1 (Long) Page 3 for Pressure-Temperature Ra ngs Page 9 for Construc on and Materials Page 10 for Dimension of Actuator Moun ng Pad Dimensions of PN F14D 8 Valve Size DN Gear Opera on Class DN PN Valve Size (Dn) Port L X P H 100 Gear Operator H P 1 B A ISO 5211 Cv (m³/h) Torque (N.m) PN10-16 Weight (Kg) PN25-40 Short Long PN16 PN40 Short Long Short Long F ,6 2,8 2,6 2, F ,3 3,6 3,3 3, F ,3 4,5 4,3 4, F ,5 6,7 6,5 6, F ,8 7,9 7,8 7, F ,9 12,5 11,9 12, F ,1 15,5 16, F , (1) F ,6 34, (2) F F , Gear opera on F (4) (4) (3) Gear opera on F (4) (4) Gear opera on F (4) (4) - 1 Cv = 1,16 Kv *1 PN 25-40: Ball Bore=95 X= 85 H=190 *2 PN 25-40: P=750 *3 PN 25-40: H=396 *4 Gear Box included Valve Operator Dn : lever opera on Dn : op onal gear box Dn 200 : gear box or lever (op onal) Worm gear operators may be mounted on KITZ ball valves at your op on for the smoothest valve opera on. Electric or pneuma c actuators are also op onally available. Contact KITZ distributors for appropriate choice and sizing of valve actuators.
9 Construc on and Materials No. Parts Standard PN Body DIN Body Connector DIN An sta c Stem ASTM A479 Type Gland Ring ASTM A479 Type Stop Pin DIN 267/11 A Stop Plate Steel nickel plated 11 Gland Washer DIN (SS) 12 Nut DIN 267/11 A Stud Bolt-Bolt *5 DIN 267/11/ A2-70 / 267/3 zinc plated 18 Nut *5 DIN 267/11/ A2-70 / 267/3 zinc plated 21 Ball *1 ASTM A479 Type 316 / Ball Seat PTFE 24 Body Seal *3 PTFE / 316L+Flexite 25 Gland Packing *2 PTFE+C+Graphite / PTFE 26 Stem Seal *4 PTFE+C+Graphite / PTFE 30 Handle SS+Plas c 31 Handle head GGG40 32 Handle bar GGG40 33 Handle bar bolt Stainless Steel 35 Bolt Stainless Steel 36 Washer Stainless Steel 40 Stem O ring FKM Standard material configura on can be applied to sour service. *1 DN 32 : ASTM A479 Type 316 DN > 32 : DIN *2 DN 25 : PTFE+C+Graphite DN > 25 : PTFE Cod. FSM : Graphite (Op onal) *3 DN 25 : PTFE DN > 25 : 316L+ Flexite Cod. FSM : 316L+Graphite (Op onal) *4 DN 25 : PTFE+C+Graphite DN > 25 : PTFE *5 PN DN 250 : DIN 267/11 A2-70 DN > 250 : DIN 267/3 C8.8 zinc plated PN DN 150 : DIN 267/11 A2-70 DN > 150 : DIN 267/3 C8.8 zinc plated Valve finish : (SS) Natural. Opera on group: DN 150: by lever. (100 ~150 op on: gear box) DN = 200: by gear box or with lever (Op onal) DN > 200: by gear box. DN 25 All part numbers are corresponding with those shown in valve assembly drawings. 9
10 F14D - ISO 5211 Top Dimensions for Class PN Full Port, Split Body, Side Entry Design Ball Valves Dimensions F14D Nominal Class size (DN.) PN PN G ø E ø S ± 0.2 ø J B min. C L (Short) M thread F ISO 5211 Flange Type M5 1.5 F M5 1.5 F M6 2 F M6 2 F M6 2 F M8 3 F M8 3 F M8 3 F M10 3 F M10 3 F M10 3 F GB GB 64.5 GB 14 ACT ACT ACT 400 M16 3 F GB 14 ACT GB ACT 64.5 GB ACT 450 M16 3 F M20 3 F16 DN 200/250/300: Dimensions with Gear Box (GB) or Actuator (ACT) 10
11 Aplicable standards Marking BS 5351 / MSS-SP-25 Coupling Flange ISO 5211 / DIN 3337 Flanges DIN 2501 / DIN 2526 Surface finish MSS-SP-6 / DIN 2526 Set-up Design Standard BS 5351 / DIN 3357 Face-to-Face distance DIN 3202 F1 / F4 / F5 F1 : Long F4 : DN100 F5 : DN125 Quality Assurance UNE-EN-ISO 9001 Fire Safe Standard BS 6755 P. 2 Tests BS 6755 P.1 A / DIN 3230 P. 3 Material Specifica on NACE MR
12 EN CAUTION Pressure-temperature ratings and other performance data published in this catalog have been developed from our design calculation, in-house testing, fi eld reports provided by our customers and/or published offi cial standards or specifi cations. They are good only to cover typical applications as a general guideline to users of KITZ products introduced in this catalog. For any specifi c application, users are kindly requested to contact KITZ Corporation of Europe for technical advice, or to carry out their own study and evaluation for proving suitability of these products to such an application. Failure to follow this request could result in property damage and/ or personal injury, for which we shall not be liable. While this catalog has been compiled with the utmost care, we assume no responsibility for errors, impropriety or inadequacy. Any information provided in this catalog is subject to from time-to-time change without notice for error rectifi cation, product discontinuation, design modifi cation, new product introduction or any other cause that KITZ Corporation of Europe considers necessary. This edition cancels all previous issues. Kitz Corporation of Europe S.A. Ramón Viñas, Sant Adrià de Besòs Barcelona Spain - España Ph Fax
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
TECHNICAL BULLETIN. Serck Audco Iron Taper Plug Valve. Experience in Motion Experience in Motion SRENTB0002-03 (A4) 02/14
TECHNICAL BULLETIN Serck Audco Iron Taper Plug Valve SRENTB0002-03 (A4) 02/14 Experience in Motion Experience in Motion Range and Index Regular Pattern Short Pattern Standard Type Screwed ends/ Flanged
MADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
TECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
Fisher V500 Rotary Globe Control Valve
V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either
Fig B36 Stainless Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
BIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
Butterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve
Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
Authentic ITT Service Parts
Pure-Flo Authentic ITT Service Parts Providing our customers with a quality product has always been an integral part of how ITT does business. Building on this commitment your Authorized Distributor of
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
Direct steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
The Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.