Innovations 2008 There's a lot to discover...

Transcription

1 Innovations 2008 There's a lot to discover... Frank Gloger, KNX Conference for Training Centers

2 Your whole home in your pocket

3 KNX Internet controller IC1-V2 REG-K, Compact, space-saving housing (6 HP) 25% greater processor power Connection via DSL possible, control via: Smartphone, PDA PC or touch-panel Video transmission via standard webcam (LAN) Up to 8 webcams (LAN) can be integrated Low power consumption in standby mode Complete Merten@Home configuration

4 KNX power supply REG-K The right solution every time New building of Conservative Medical Clinic of the Johannes Gutenberg University Mainz

5 KNX power supply REG-K The right solution every time 160 ma, 320 ma and 640 ma with and without emergency input Power supplies with emergency power input can be connected to the new REG emergency supply Uniform size 4 HP, all connections via plug-in terminals Reset button instead of switch -> simple and safe line reset KNX power supply 160 ma, art. no ma, art. no KNX power supply with emergency power supply 640 ma, art. no ma, art. no ma, art. no ma, art. no

6 KNX power supply REG-K The perfect emergency power supply New: power supply with emergency power input New: emergency power supply with LED and signalling contacts for Mains voltage Error warning Battery operation Binary input for reporting on the KNX Sealed lead battery

7 KNX Basic weather station All weather data under one umbrella A multi-talented genius - Processes wind, rain, brightness and temperature measurements Weather station for small commercial buildings and detached houses Direct evaluation in the device Power supply from bus voltage 4 universal channels 3 sunshade channels (especially for blind and roller shutter applications) Integrated heating unit to dry the rain sensor (230 V connection)

8 KNX brightness and temperature sensor Perceptibly more efficient 2 weather values can be recorded with a single device and sent to the bus All brightness thresholds can be programmed on site if necessary 4 channels each with 2 logically linked weather conditions 1 sunshade channel

9 KNX fan coil actuator REG-K Perfect climate with KNX Actuator for 1- to 3-speed control of air convectors (fan coil) Suitable for operation on KNX Fan coil actuator specifically controls the fan coil with up to 3 fan speeds and the heating/cooling valve Can be controlled and actuated by means of multi-function pushbuttons featuring room temperature controllers

10 KNX room thermostat UP/PI with 4-gang push-button interface More energy-efficient control Can be used for single-room temperature control Available in System M and System Design Integrated bus coupler Integrated 4-gang push-button interface Input 1 can be used to connect a temperature sensor 2 inputs can be set as outputs (max. 0.8 ma)

11 TeleController Plus REG-K Always there when you're away Fault signalling and remote switching by own voice message, text message, fax and ebuilt-in bus interface module which can be used to manage 20 KNX device functions (1 bit, 1 byte and 2 byte values can be set) Option of switching bus devices with 10 KNX device functions Transmission of alarm calls to freely programmable numbers with 10 KNX device functions Six conventional devices can be switched on/off via switch outputs

12 KNX timer REG-K Built-in punctuality as standard Time transmitter for synchronising bus devices The time transmitter is a clock which sends the time and date to the bus This clock can be set with the DCF signal or via the bus The time data can be sent both cyclically and on request Time zones and summer/winter time can be programmed flexibly Integrated lithium battery so that operation continues in case of a power failure

13 New Devices for Energysaveing KNX ARGUS-Presence with light control and IR-receiver KNX switch actuators with manual mode and current detection

14 ARGUS Presence Overview KNX ARGUS-Presence Basic 2 movement / presence blocks Normal mode (no Master/Slave) 4 movement sensors, commonly adjustable KNX ARGUS-Presence 180/2,20m FM 5 movement / presence blocks Normal, master, slave and monitoring mode 2 movement sensors, separately adjustable KNX ARGUS-Presence 4 movement sensors separately adjustable, others like prev. device KNX ARGUS-Presence with light control and IR-receiver Like previous device and additionally: Light control IR-receiver (10 x internal + 10 x KNX)

15 ARGUS Präsenz Overview of the functionality Light controller Actual value correction ionality Funct IR-receiver Master/Slave parameter Sector oriented settings Outputs per block Presence block External brightness value Self-adjusting staircase time Basic Pres. 2,20m FM e Presenc Pres. w ith contr olling Product value

16 ARGUS Presence Sector-orientated settings of movement sensors For each block, sectors A-D can be enabled or disabled separately Default setting: all sectors are used in parallel for movement detection Application examples In one sector there is an increased air circulation: This can cause undesired movement impulses Solution: switch off or reduce sensitivity of the sector The desk is located in sector B and sector D is monitoring the entrance The range of sector D can be reduced to not trigger room functions (blocks) from the corridor Sector D can be used with full range in a separate block to control the corridor lighting

17 ARGUS Presence with light control and IR-receiver Overview Five presence/movement blocks like the presence detector, and additionally: IR-receiver 10 channels for configuration Brightness threshold, times and range 10 channels for KNX-functions Switching, dimming, blinds, scenes, edges function (long/short operation) Light control 4 bit or 1 byte control Two light groups can be controlled with displaced values Switching additional lighting

18 ARGUS Presence with light control and IR-receiver Advantages of IR control Installation site IR receiver is located on the ceiling -> Optimal reception Not blocked by furniture later Full remote control - max.10 channels Toggling, switching Pulse edges 1 bit, 1 byte, 2 byte Dimming, blind, scene Setting control - max. 10 channels Increase/decrease range Brightness thresholds or actual value Increase/decrease staircase timer

19 CONNECT radio universal remote control Infrared control of up to 5 AV devices Remote control of all Merten IR components Individual names for the rooms and groups can be assigned and shown on the LCD display Reliable lighting and blind control via the Merten CONNECT radio system Configuration with the Easy CONNECT method: connect up to 5 devices with one another without software Configuration with the Easy Tool method: more than 5 devices using the CONNECT radio configuration tool Scene control of 3 scenes per room Individual programming of Merten CONNECT radio push-buttons

20 KNX switch actuators with manual mode and current detection 2-gang, 4-gang, 8-gang, 12-gang Integrated current detection, which measures the load current on each channel Operating hours counter Switch-on counter Power meter Nominal current 16A All switch outputs can be operated with manual switches Real status feedback function Even in manual mode the actuator transmits the current status

21 KNX switch actuators with manual mode and current detection discover your energy-saveing potential! determination/monitoring of the switch on time and enery volume e.g.: hotwater devices electro kitchen stove

22 Thank you for your time and attention!