Eaton Gear Pumps. Parts Information. Model Multiple Gear Pumps B2 Series. March, 1993
|
|
|
- Dina Russell
- 7 years ago
- Views:
Transcription
1 Eaton Gear Pumps March, 1993 Parts Information Model Multiple Gear Pumps B2 Series
2 Pump Parts Drawing Item 2 Backplate see pages 4 and
3 Pump Parts List Item Part No. Number Description Qty. 1 Frontplate Assembly Left-Hand Rotation Right-Hand Rotation 2 Backplate (see pages 4 and 5) 1 3 Body Assembly Front 1 4 Body Assembly Rear 1 5 Drive Gear Assembly 1 6 Idler Gear Assembly Front 1 7 Idler Gear Assembly Rear 1 ~ Backup Gasket A/R ~ Wear Plate A/R ~ Shaft Seal 1 ~ Washer 1 13 Cap Screw 8 ~ O-ring A/R Adaptor Plate Front 1 ~ Molded O-ring A/R ~ Bearing Seal A/R Key for Straight Shaft 1 26 Key Rear Gear 1 28 Body Assembly Center A/R 29 Idler Gear Assembly Center A/R 44 Gear Rear 1 45 Key Center Gear A/R Adaptor Plate Rear A/R 49 Gear Center A/R Copper Washer Seal Kit for Double Pump Seal Kit for Triple Pump See table, below, for specific part number See tables on pages 6 and 7 for specific part number ~ Parts contained in seal kits A/R As Required Item No. 3, Item No. 6, Item No. 44 Item No. 26 Displacement 4 and 28 7 and 29 and 49 and 45 cm 3 /r [in 3 /r] Body Assembly Idler Gear Gear Key 8.2 [.50] [.66] [.84] [1.02] [1.20] [1.37] [1.54] [1.69] [1.87]
4 Backplate Drawings Plain Backplate Flow Divider Backplate 2A 38 38A 37B 2C Relief Valve Backplate 2B 41 51A 51A4 51A3 51A2 51A1 51A 51A4 51A3 51A2 51A B 37A 51A4 51A3 51A2 51B1 51B 59A 63B 59 Tandem Backplate D E 41A Tandem Flow Divider Backplate 42A B 63A 4
5 Backplate Parts List Item Part No. Number Description Qty. 2A Plain Backplate Side Ports 1 5/16-12 Suction, 7/8- Pressure Rear Ports 1 5/16-12 Suction, 7/8- Pressure Side Ports 1 1/16-12 Suction, 7/8- Pressure 2B Relief Valve Backplate Side Ports 1 1/16-12 Suction, 7/8- Pressure, 7/8- Drain Side Ports 1 1/16-12 Suction, 7/8- Pressure, Internal Drain Side Ports No Suction, 7/8- Pressure, Internal Drain 2C Flow Divider Backplate Side Ports 1 5/16-12 Suction, 3/4-16 Priority, 7/8- Secondary Rear Ports 1 5/16-12 Suction, 3/4-16 Priority, 7/8- Secondary 2D Tandem Flow Divider Backplate 1 X Side Ports 1 1/16-12 Suction, 3/4-16 Priority, 7/8- Secondary 2E Tandem Backplate 1 X Side Ports 1 1/16-12 Suction, 7/8- Pressure Side Port No Suction, 7/8- Pressure Tandem Cover Plate O-ring Cap Screw Plug/O-ring Assembly 1 37A NSS Plug 1 37B O-ring Plug/O-ring Assembly 1 38A NSS Plug Shim (.0239 inch thick) A/R 41 Flow Divider Spool 1 41A Spool for Tandem Flow Divider Backplate Spring 1 42A Spring for Tandem Flow Divider Backplate 1 51A Relief Valve Assembly 1 51A1 NSS Relief Valve 1 51A O-ring 1 51A Backup Ring 1 51A O-ring 1 51B Plug Assembly 1 51B1 NSS Plug Plug O-ring Spring Sleeve O-ring Plug/O-ring Assembly 1 59A NSS Plug Shim Washer (.010 inch thick) A/R Relief Valve Spring Poppet Plug/O-ring Assembly 1 63A NSS Plug 1 63B O-ring 2 See tables on pages 6 and 7 for specific part numbers NSS Not Sold Separately A/R As Required 5
6 Parts List Item No. 5 Drive Gear Assembly Front Center Rear Part Displacement Displacement Displacement Shaft Number cm 3 /r [in 3 /r] cm 3 /r [in 3 /r] cm 3 /r [in 3 /r] End [.50] 8.2 [.50] 5/8 inch 9 Tooth spline [.50] 8.2 [.50] 3/4 inch 11 Tooth Spline [.66] 8.2 [.50] 5/8 inch 9 Tooth Spline [.66] 10.8 [.66] 3/4 inch 11 Tooth Spline [.66] 16.7 [1.02] 5/8 inch 9 Tooth Spline [.66] 10.8 [.66] 10.8 [.66] 3/4 inch 11 Tooth Spline [.66] 16.7 [1.02] 3/4 inch 11 Tooth Spline [.66] 10.8 [.66] 8.2 [.50] 3/4 inch 11 Tooth Spline [.84] 13.8 [.84] 5/8 inch 9 Tooth Spline [.84] 13.8 [.84] 13.8 [.84] 3/4 inch 11 Tooth Spline [1.02] 8.2 [.50] 5/8 inch 9 Tooth Spline [1.20] 19.7 [1.20] 3/4 inch 11 Tooth Spline [1.20] 13.8 [.84] 5/8 inch 9 Tooth Spline [1.20] 10.8 [.66] 5/8 inch 9 Tooth Spline [1.20] 8.2 [.50] 3/4 inch 11 Tooth Spline [1.37] 19.7 [1.20] 3/4 inch 11 Tooth Spline [1.37] 10.8 [.66] 3/4 inch Straight Keyed [1.54] 16.7 [1.02] 3/4 inch 11 Tooth Spline [1.54] 19.7 [1.20] 3/4 inch 11 Tooth Spline [1.69] 16.7 [1.02] 5/8 inch 9 Tooth Spline [1.69] 10.8 [.66] 5/8 inch 9 Tooth Spline [1.69] 10.8 [.66] 3/4 inch 11 Tooth Spline [1.87] 30.6 [1.87] 5/8 inch 9 Tooth Spline [1.87] 13.8 [.84] 5/8 inch 9 Tooth Spline [1.87] 16.7 [1.02] 3/4 inch 11 Tooth Spline Item No. 51A Relief Valve Assembly Part Pressure Setting Number (bar [PSI]) 34.5 [500] 51.7 [750] CA 68.9 [1000] EA 86.2 [1250] GA [1500] JA [1750] LA [2000] NA [2250] QA [2500] 6
7 Parts List Item No. 41 Flow Divider Spool Part Flow Setting Number (LPM [GPM]) 3.8 [1.00] [1.50] [2.00] 9.5 [2.50] [3.00] 13.3 [3.50] [4.00] [4.50] [5.00] [5.50] [6.00] Item No. 13 Cap Screw Part Dimension L Number (mm [in.]) [4.50] [4.75] [5.00] [5.25] [5.50] [5.75] [6.00] [6.25] [6.50] [7.25] [7.50] [8.00] L Pump Identification Numbers Stamped on Mounting Flange Date Code Last Number of Year Built Engineering Change Code Week of Year 0 thru 52 Tester's Initials RSA Product Number Sequential Identification Rotation R = Right-Hand L = Left-Hand Displacement (cm 3 /r [in 3 /r]) 0 = 8.2 [.50] 1 = 10.8 [.66] 2 = 13.8 [.84] 3 = 16.7 [1.02] 4 = 19.7 [1.20] 5 = 22.5 [1.37] 6 = 25.2 [1.54] 7 = 27.7 [1.69] 8 = 30.6 [1.87] Pump Configuration 0 = Plain 1 = Relief Valve 3 = Flow Divider 4 = Tandem 8 = Multiple Product Type 253 = B2 Gear Pump 7
8 Eaton Fluid Power Group Hydraulics Business USA 615 Lone Oak Road Eden Prairie, MN USA Tel: Fax: Eaton Fluid Power Group Hydraulics Business Europe Route de la Longeraie Morges Switzerland Tel: +41 (0) Fax: +41 (0) Eaton Fluid Power Group Hydraulics Business Asia Pacific 11th Floor Hong Kong New World Tower 300 Huaihai Zhong Road Shanghai China Tel: Fax: Eaton Corporation All Rights Reserved Printed in USA Document No. E-PUGE-TP001-E Supersedes November 2008
Char-Lynn Disc Valve Motors. Parts Information. 4000 Compact Series
Char-Lynn Disc Valve Motors Parts Information 4000 Compact Series Geroler Motors 00 Parts Drawing/List Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8] Drive, Main
Char-Lynn Hydraulic Motors. Repair Information. W Series Geroler Motors 002, 003. April, 1999
Char-Lynn Hydraulic Motors April, 1999 Repair Information W Series Geroler Motors 002, 003 W Series Geroler Motors Tools Required 5/16 inch Hex Key Bullet for Shaft Installation - Eaton Tool No. 600633
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
Dual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
FT1380 & FT1390 Crimp Machines
FT1380 & FT1390 Crimp Machines The FT1380 is a benchtop crimp machine that crimps hydraulic hose assemblies up to 1 1/4" (-20) braided and four spiralwire hose. With the launch of Eaton 6S spiral hose
Round Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD
: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE
1.Booklet. Hydraulic Motors. General Purpose MotorsR Series
.Booklet 1.Booklet Hydraulic Motors out 2 out 1.Booklet R Geroler Element... 11 Displacements... [15] ** 75 [20] * Speed... Up to 10 RPM Pressure Bar [PSI]... 125 [1800] Cont. 165 [2400] Inter. Torque
PART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Illustrated Parts List
More time on the road Illustrated s List FRLO-640C-T November 0 Contents How To Use The Illustrated s List... CASE ASSY... 4 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT ASSY... 8 ELECTRONIC CONTROL UNIT...
VHO/VQ Single, Double & Triple Vane Pumps
VHO/VQ Single, Double & Triple Vane Pumps Series Available: 20, 25, 30, 35, 45, 50 For Mobile and Industrial Use Cartridge Kits Available for All Sizes Same Day Shipments www.fluidynefp.com Our People
Series 90 100 cc Axial Piston Pump. Parts Manual
Series 90 100 cc Axial Piston Pump GENERAL INFORMATION Service parts identification... 4 Nameplate... 4 Date code... 5 Service bulletins... 5 Procedure to identify a part... 5 Order code... 7 VARIABLE
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
BOWIE PUMPS OPERATION - MAINTENANCE
BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped
STEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
CUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
220 Series Piston Pump Typical Applications Features and Benefits
Introduction 220 Series Piston Pump Eaton s new 220 Series piston pump signifies a step change in the generation of hydraulic power. Utilizing the latest developments in hydraulic pump technology, the
2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
MONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB
MONO BLOCK DIRECTIONAL CONTROL VALVE TS112TSLB TS TS212TSTSJB P T TS312TSDTSTKJ TS112TSJB FEATURES: O RG PORTS to eliminate leakage. POWER BEYOND CAPABILITY to fit your multi valve circuits. BUILT ANTI-DROP
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Illustrated Parts List
Spicer Tandem Drive Axles 44,000 65,000 Illustrated Parts List AXIP-0107t May 1988 For the most current information, visit the Spicer website at www.spicerparts.com Spicer Axle Parts Book Spicer presents
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List Spicer Single Reduction 34,000-45,000 lbs AXIP-0089 November 2004 Table of Contents TABLE OF CONTENTS Spicer Axle Parts Book.......... 2 Forward Tandem Axle Differential
Rexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
Series PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US
Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
PUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
Auto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL
Auto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL Fabco Automotive Corporation, Livermore, CA Ph: (925) 454-9500 Fax: (925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com See Note 5 See
Vickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
Instructions. Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG. Pressure Relief Procedure.
Instructions Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG Model 24G766 Important Safety Instructions For complete warnings and safety instructions see RoadLazer RoadPak
FP12 FERRA SERIES HEAVY DUTY GEAR PUMP
FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures
Pos. Part No. Designation Quantity
Part No.: R902028609 Designation: AA2FM160/61W-VSD510 R902030569 1 R902030998 ROTARY GROUP L 3 R902038553 HOUSING 4 R909409201 PORT PLATE 5 R909084174 CYLINDER PIN 6 R909154656 O-RING D 7 R909083129 SOCKET-HEAD
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR
Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand
HYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT
-J056 REV. 0-05-0 HYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT GENERAL Kit Number 584- Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com
4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION
MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION Part Number: 99821002 Rev 21 FEBRUARY 2011 REGISTERED TO ISO 9001:2008 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301
Replacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710
This instruction is valid for all ACD pump models shown on page 2
Screw pumps ACD Maintenance and Service Instruction This instruction is valid for all ACD pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service intervals
LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T
LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T LV22RFSTKLB A2 B2 A1 B1 P LV22RFSTKABW FEATURES: O RING PORTS to eliminate leakage. FOURTH POSITION REGEN allows cylinder to rapidly extend. POWER
Trouble Shooting Tech Tips Operation
Steering Components TroubleShooting Tech Tips Table of Contents Basic Steering System Operation 2 Sector Shaft Adjustments 4 Drag Link Adjustment 5 Relief Valve/Unloading Valve Adjustment 6 Ross TAS Automatic
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
Service Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
ACCUMULATOR INSTALLATION
7001-7 ACCUMULATOR INSTALLATION BRAKE ACCUMULATORS I 308L93 Rae 7-59710 Issued 6-93 Printed in U.S.A 7001-8 Removal ACCUMULATOR VALVE 1. Park the machine on a level surface and lower the. loader bucket
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
SE-100-1, SE-200-1, SE-500-1, and SE-1000-1 AIR CHAMP PRODUCTS. User Manual SE BRAKE MODELS: (i) MTY (81) 83 54 10 18 ventas@industrialmagza.
AIR CHAMP PRODUCTS User Manual SE BRAKE MODELS: SE-00-, SE-200-, SE-500-, and SE-000- (i) FORM NO. L-20084-E-040 In accordance with Nexen s established policy of constant product improvement, the specifications
MONO BLOCK DIRECTIONAL CONTROL VALVE TS
SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2
Trunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-5005C March 2003
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-00C March 00 For the most current information, visit the Roadranger web site at www.roadranger.com Contents How To Use The Illustrated Parts
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
K&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
EQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual. B bestflangespreader
EQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual B bestflangespreader com INDEX THE EQUALIZER RANGE OF MECHANICAL & HYDRAULIC SPREADING
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model:K 520M /CDN ( 59559150 ) - Parts Section:1.0 PIECE PARTS Page 1 of 16 1 50690940 1 COVER 2 50319770 1 COVER / 1.069-937.0 2 50312410 1 COVER 4 40503340 1 CHASSIS 5 51052230 1 AXLE 6 53215050
INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
2" & 3" Poly Wet Seal Pump Instruction Manual
Always place the pump as close to the liquid to be pumped as possible. Keep the suction line short and with few bends. Keep the pump and engine on a level foundation. A poor foundation and a heavy suction
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU!
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU! Atlanta (Monroe) GA 770-267-3787 gpm@gpmhydraulic.com www.gpmhydraulic.com What You Don t Know About Hydraulic Accumulators Can Kill You TABLE OF CONTENTS
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
Table of Contents. M Series Variable Displacement Piston Pumps
Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations.... 4 Model Code Selection.... 5 Model Code Options.... 6 Specifications and Performance...
Flows to 18 GPM. Pressure to 100 PSI
Markets Agriculture-fertilizers, pesticides Automotive-coolants, lubricants Book Mfg-adhesives, glue Construction & Mining-lubricants, fuels, coolants Filtration System Pumps-portable, stationary Food
Pump ED 101. Positive Displacement Pumps. Part I Reciprocating Pumps
Pump ED 101 Positive Displacement Pumps Part I Reciprocating Pumps Joe Evans, Ph.D http://www.pumped101.com There are many pump designs that fall into the positive displacement category but, for the most
MOPAR 8.75 REAR DIFFERENTIAL INFORMATION
MOPAR 8.75 REAR DIFFERENTIAL INFORMATION Sure Grip is the performance type of differential that enables both rear tires to turn under power for better launch traction. Sure Grip is the Chrysler name for
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
Volkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
Series 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
GENUINE METARIS PTO CATALOG
Replacement Units & Parts GENUINE METARIS PTO CATALOG Your Source for High Quality PTOs, PTO Parts and PTO Accessories www.metaris.com Contents General Information Section Page PTO & Pump Information Worksheet
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
Rickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
FOREWORD. Right and left as used throughout this manual are determined by facing the direction the machine will travel when in use.
FOREWORD The purpose of this manual is to assist you in operating and maintaining your Flail mower. Read it carefully before operating and maintaining the Flail mower, it furnishes the specifications,