We aim to provide innovative, unique and stylish doors

Transcription

1

2 ABOUT FINER TIMBER DOORS Finer Timber Doors is an Australian family business, which has been manufacturing quality cabinet doors and bench tops for the kitchen industry since Through unique craftsmanship, we produce quality specialty joinery, providing flexibility for personal taste and front doors that can create the ultimate first impression. With experienced staff and stateof-the-art machinery, we endeavour to manufacture and complete our products with exceptional standard and lasting quality. We strive to provide lasting value through our high standards in production and provide the care and detail to meet your requirements. At Finer Timber Doors, we do our best to always provide a courteous and prompt service. We aim to provide innovative, unique and stylish doors FINER TIMBER DOORS GUARANTEE Finer Timber Doors is an all Australian manufacturer, producing all our products on site. The company guarantees its cabinet doors against defects by design, workmanship and/or the use of faulty raw materials (fair wear and tear excluded). Colour and grain variations occur naturally in timber and are not considered a defect. All timbers are colour matched by hand to achieve a consistent result. Structural failure due to excessive alteration or abuse is not covered by warranty. The guarantee does not extend in any way to workmanship or damage that has occurred during the handling and delivery. All doors and tops are checked before leaving our premises. Finer Timber Doors agrees to repair or replace at its discretion, unfinished doors found to be defective within the meaning of this warranty and is limited to the purchase price of the originally supplied doors.

3 SOLID TIMBER DOOR PROFILES ~ SOLID BEAUTY RANGE The very traditional range of solid timber doors. All doors are supplied raw unless specified to be polished. Tas Oak FTD1 Blackwood FTD1 Arch/Pencil Round Edges American Rock Maple FTD2 Square/Small Edge Mould Sapele FTD2 Arch/Large Edge Mould American Cherry FTD4 Raised solid plaque Raised solid plaque Half round mould Solid with a groove in plaque

4 SOLID TIMBER DOOR PROFILES American White Ash FTD3 Square/Small Edge Mould Blackwood NFG FTD3 Arch/Stepped Pencil NFG Messmate FTD14 Tas Oak FTD14 Arch/Pencil Round Edges Tas Myrtle FTD16 Raised solid plaque Nuveau mould Raised solid plaque Country life Internal square edged frame Solid flush panel

5 SOLID TIMBER DOOR PROFILES Blackwood FTD18 Square/Pencil Round Edges American Walnut FTD19 American Walnut FTD19 Red Gum Select FTD20 Red Gum Select FTD20 Solid frame with a solid flush insert panel Note: We do not take any GUARANTEE for any movement that may occur with this particular design of door. Sharp raised solid plaque Modern profile DGI styles & rails or our standard styles & rails Square or Arch Sharp raised solid plaque Modern profile

6 SOLID TIMBER DOOR PROFILES SOLID VENEER PROFILES TIMBER DOOR PROFILES ~ ~ MODERN SIMPLICITY Sleek and Stylish range of timber veneer doors. All doors are supplied RAW unless specified to be polished. Tas Oak FTD21 Square/Davo Mould - Square Edges Tas Oak FTD21 Danta FTD6 Danta FTD6 Jarrah FTD7 Raised solid plaque Similar to FTD 1 plaque (smaller mould) Davo styles & rails with 5.5mm ply plaque Internal square edged frame with 5.5mm ply plaque

7 VENEER TIMBER DOOR PROFILES Jarrah FTD7 Tas Myrtle FTD13 Tas Myrtle FTD13 New Guinea Rosewood FTD15 New Guinea Rosewood FTD15 Internal square edged frame with 5.5mm ply plaque Internal large bevel edged frame with 5.5mm ply plaque Rounded or square edges Internal small bevel edged frame with 5.5mm ply panel

8 VENEER TIMBER DOOR PROFILES VENEER WITH BOLECTION MOULD TIMBER DOOR PROFILES ~ VISUALLY INSPIRING The heritage designs provide a complete visual experience. All doors are supplied raw unless specified to be polished. Silky Oak FTD17 Silky Oak FTD17 Jarrah FTD8 Tas Oak FTD5 Tas Oak FTD22 Internal small pencil round frame with 5.5mm ply plaque Internal square edged frame with 5.5mm ply panel & 22mm bolection mould Internal davo styles & rails edged frame with 5.5mm ply plaque & 22mm bolection mould on face of frame Internal square edged frame with 5.5mm ply plaque & farmhouse bolection mould Top and bottom rails: 85mm Styles: Standard 63mm

9 LINING BOARD TIMBER DOOR PROFILES ~ UNIQUE AND DESIRABLE The country design of doors provide a long lasting impression. All doors are supplied raw unless specified to be polished. Baltic Pine FTD11 Regency Blackwood FTD9 V-Groove Blackwood FTD9 V-Groove Tas Oak FTD10 V-Groove Western Red Cedar FTD10 Arch/Stepped Pencil Regency Internal square edged frame with 22mm bolection mould Regency or V-Groove (small mould) with lining board, Regency or V-Groove with lining board Regency or V-Groove WITH WITH

10 FRAME ONLY DOORS The timber colours shown are an indication only and do not mean you will receive the exact colour, as timber variation is very common, while each piece is unique. Natural Feature Grade Timbers (NFG) Available: Available in most profiles. Finer Timber Doors provide a wide range of timber species to assist you with your personal requirements. If a timber is not listed, please contact our office for availability and price. NFG Red Gum NFG Messmate COLONIAL BAR DOORS All timbers are graded in accordance to Australian Standards. A limited amount of interesting natural growth characteristics: gum veins pockets, knots, colour streaks, cracks and grub holes. NFG Blackwood Also available: NFG Tasmanian Oak/ Victorian Ash All of our products are available in a variety of timber species and colour ranges. Also available: Knotty Pine/ Radiata Pine American Oak American Cherry US White Ash Cambia Silky Oak Celery Top Pine Blackbutt Hoop Pine Oregon Rock Maple NZ Pine/ Clear Pine Red Gum Select Western Red Cedar Sapele Blackwood FTD12 - Four Section Door Tasmanian Oak/ Vic Ash Danta Myrtle American Walnut Colonial Bars Square or Arch: Rebate = 13mm Available in sections: 4, 6 or 8 Bolection Mould Doors FTD8, FTD11 and FTD22 will be made as the above Colonial Bar Mould. Baltic Pine Jarrah European Beech Messmate Blackwood New Guinea Rosewood Makore American White Ash

11 BENCHTOPS MOULDINGS Our solid timber benchtops provide a warm feel, while creating an elegant finish. We supply benchtops in a range of timbers suitable for all areas, including kitchens, bathrooms, offices and laundries. All our tops are made at our premises and made to order. We offer a range of thickness (20mm, 32mm, 38mm & build-ups) and lamination sizes. Standard and recommended lamination size on most timbers is 90mm. A range of different Edge Profiles are available for our benchtops, please enquire within. Edge Mouldings A choice of edge moulding to the outside of your doors. Not specified, doors will be finished with square edges. Cap Mouldings Two decorative capping mouldings are available. EM1 Stepped Pencil EM2 Pencil Round EM3 Small E/Mould EM4 Large E/Mould EM5 Large Chamfer Square 43mm 32mm thick (small pencil round top & bottom edges) Skirting Mouldings A decorative skirting to finish the room with style. The height is variable. CM1 Standard 40mm 32mm thick (small pencil round top & bottom edges mm CM2 Edge Profile Choices: Bolection Mouldings Standard in doors FTD 8, FTD 5 and FTD 11 is 22mm. Also available on request is the 32mm Tudor Mould. 22mm 38-40mm thick (square edges) Square Pencil Round Stepped Pencil 32mm

12 Extra Services Polishing & Staining Sanding Specialty Joinery Front & Entrance Doors External & Internal Bi-Fold Units Specialty Timber Windows For more information, please refer to our website. Factory 1-2/2 Nicole Close, Bayswater North, VIC 3153 T F W E enquiries@finertimberdoors.com.au