Veneer Sheet Stock & Panel Descriptions. Wood Veneer with a wood back suitable for use with contact adhesive.
|
|
|
- Miles Ferguson
- 7 years ago
- Views:
Transcription
1 Sheet Stock Options s, & Wood with Resin Back (Non Adhesive) Lb/Sq. Ft =.194 Wood With Wood Back (Non Adhesive) Lb/Sq. Ft =.123 Wood with Paper Back (Non Adhesive) Lb/Sq. Ft =.106 Wood with Wood Back (A - Peel & Stick) Lb/Sq. Ft =.177 Wood with Paper Back (A - Peel & Stick) Lb/Sq. Ft =.148 Sheet ore Lb/Sq. Ft =.460 Sheet ore Lb/Sq. Ft =.739 Sheet ore Lb/Sq. Ft =.934 Sheet ore Lb/Sq. Ft =.934 Sheet ore Lb/Sq. Ft =.448 ½" ore Lb/Sq. Ft = ½" ore Lb/Sq. Ft = ⅝" ore Lb/Sq. Ft = ⅝" ore Lb/Sq. Ft = /16" ombi-ore Lb/Sq. Ft = Sheet Stock & Panel Descriptions Sheet Stock Wood veneer with a resin soaked backer sheet that has been permanently bonded under heat and pressure. This provides the sheet with dimensional stability, strength and flexibility and acts as a barrier to prevent adhesives and finishes from penetrating. an be used with a solvent based or water based contact adhesive. Resin backed veneers are also sometimes referred to as DuraBack, PolyBak, or PolyLam. Wood with a wood back suitable for use with contact adhesive. Wood with a paper back suitable for use with contact adhesive. 2 Ply sheet stock that provides the look of solid wood plus 3M Peel and Stick adhesive. Wood with a paper back plus 3M Peel and Stick adhesive. Sheet Stock A Face grade wood veneer, 3 ply veneer core with a #4 back. The #4 back may be a different wood species than the A face. A Face grade wood veneer, core with a #4 back. The #4 back may be a different wood species than the A face. Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, core with a #4 back. The #4 back may be a different wood species than the A face. A or B Face grade wood veneer, veneer core with various grade backs. ½" Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, veneer core with a #1 back. ⅝" Sheet Stock A Face grade wood veneer, core with a #1 back. A Face grade wood veneer, veneer core with a #1 back. 11 /16" ombi-ore ombi-core has veneer core inner plies with crossbands. This material offers similar strength and stability to veneer core but has the void-free surface quality of. Also available in ustom Pressed Options, see Section.4. Sheet Stock ore Lb/Sq. Ft = AA, A or B Face grade wood veneer, core with a #1 back. ore Lb/Sq. Ft = A Face grade wood veneer, veneer core with a #1 back. Note: All veneers are book matched on the face side, with the exception of Hickory, all Rustic and notty Grades..1.2 For PRIING See Section.1 in our Wholesale Pricing atalog. (Phone) :00AM - 4:30PM ST (24 Hour Fax)
2 s, & Sheet Stock Options Slicing Methods Rotary ut Plain Sliced Rift ut The log is turned against a razor sharp blade, like unwinding a roll paper. This cut produces a wide veneer with a bold variegated pattern. ½ of a log is held heart side against the table. Slicing is done parallel to the center line of the log. This cut produces cathe dral grain. Slicing is done across the growth rings to produce a straight grain look. Sometimes flake is present in oak due to the Medullary ray cells. Slicing is done at a 15 angle across the growth rings to produce a straight grain look without flake. nife SS = Rough ut to Stock Sizes (Only) RTRW = Rip to Rough Width PTS = Precision ut to Size ut and Ripped Descriptions A sheet that is only available in the following sizes: : 4'x8', 2'x8', 4'x4', 2'x4', 24"x32".,, ⅜", ½", ⅝", 11 /16",, ⅞", 1" Panels: 4'x8', 2'x8', 4'x4', 2'x4', 24"x32". HDF : 60"x96", 30"x96", 60"x48", 30"x48". 12.0mm, 15.2mm and 18.0mm Panels: 60"x60". Edges may need to be trimmed. Some sheets may be slightly oversized. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. Available in customer specified widths x 8' long only (60" long for 12.0mm, 15.2mm & 18.0mm thick panels). Edges may need to be trimmed. Specified widths will not be oversized. Some lengths may be slightly oversized. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. Available in customer specified widths and lengths (any size piece that the sheet will yield). PTS items will be square and the exact size ordered. Pieces will not be oversized. Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. Precision ut to Size sheet stock is 100% free from defect on the face of the part. Finished sizes include cuts to both the width and the height. See the chart below for the actual size of our Sheet Stock materials. Allow per saw kerf. For PRIING See Section.1 in our Wholesale Pricing atalog. 99.7% American Made.1.3
3 Sheet Stock Options s, & Actual Size of Sheet Stock lass Description Actual Size of Sheet 2'x8' sheets are cut from 4'x8' Resin Back 48½" x 96½" sheets. We split the sheet equally in two halves to produce two slightly oversized Non Adhesive Wood Back 48½" x 96⅜" 2x8 s. Paper Back 49" x 97" * Pressure Sensitive Wood Back 48½" x 96⅜" * A (Peel & Stick) will cover the entire 4'x4' sheets are cut from 4'x8' length of the sheet, but may not extend to Adhesive (A) sheets. We split the sheet Paper Back 49" x 97" the edges in width. equally in 2 halves to pro- ore 48½" x 96½" duce two slightly oversized ( Not used for oversized 2'x8', 4'x4' 4x4 s. (This is only available ore A4 96½" x 48½" and 2'x4' panels.) with material and veneer.) ore A1 48½" x 96½" ore A4 48½" x 96½" 2'x4' sheets are cut from 4'x8' ore sheets. We split the sheet 48½" x 96½" equally in 2 halves in both ½" ore A1 48½" x 96½" width and height to produce four slightly oversized 2x4 s. ½" ore 48½" x 96½" (This is only available with ⅝" ore A1 48½" x 96½" material & veneer.) ⅝" ore 48½" x 96½" If you are ordering 2'x4', ore A1 48½" x 96½" 4'x4', 2'x8' or 4'x8' sheets, you will be charged for that ore 48½" x 96½" square footage but will receive slightly oversized, Raw, ⅜", ½", ⅝" 11 /16",, 1" 49" x 97" panels. HDF High Density Fiberboard 61" x 97" The same rules apply as above when cutting the 5'x8' panels in halves or quarters. (Standard) One-Sided (1S) Finish - Sheet Stock Products Non-Adhesive Resin Back.037" [0.9mm] +.008"/-.007" ore, A1.220" [5.6mm] +/-.005" Non-Adhesive Wood Back.036" [0.9mm] Non-Adhesive Paper Back.023" [0.6mm] ore, A4.220" [5.6mm] +/-.005" A Paper Back.023" [0.6mm] ore, A4.220" [5.6mm] +/-.005" Drawer Box Bottom (8'x4') See Finish Options notes within this section for more information. A Wood Back.036" [0.9mm] ore, A4.156" [4.0mm] ore A or B Face.250" [6.4mm] +0"/ " Various Grade Backs ore, A4.165" [4.2mm] +/-.010".250" [6.4mm] ore, A4.165" [4.2mm] +/-.010" (8'x4') HDF.125" [3.2mm] (5'x8') ⅜".375" [9.5mm] ½" ore, A1.500" [12.7mm] +0"/-.015" ¹¹/16" ombi-ore.687" [17.4mm].1.4 ½" ore, A1.500" [12.7mm] +0"/ " ¹¹/16".687" [17.4mm] For PRIING See Section.1 in our Wholesale Pricing atalog. (Standard) Two-Sided (2S) Finish - Sheet Stock Products ½".500" [12.7mm] 18.0mm ore.709" +.03"/-.04" 12.0mm ore.4724" +.02"/-.03" ore AA Face +0"/-.015" Door Grade See Finish Options notes within this section for more information. ⅝" ore, A1.625" [15.9mm] +0"/-.015" ore A or B Face +0"/-.015" #1 Grade Back ⅝" ore, A1.625" [15.9mm] ore, A1 ⅝".625" [15.9mm] 15.2mm ore.598" +.02"/-.03" 1" 1.00" [25.4mm] (Phone) :00AM - 4:30PM ST (24 Hour Fax)
4 s, & Sheet Stock Options Ordering & Pricing Notes:, & Ordering Guidelines 1 Order Forms Please use Sheet Goods Order Forms (E Z Forms #8, #8.1, #8.2). Pricing 1 Pricing Please see Section.1 of the Wholesale Pricing atalog. 1 Refacing with SolidTone Finish/olor 2 1 Refacing with SolidTone WoodGrain Finish/olor 1 One Sided (1S) Finishing 2 Two-Sided (2S) Finishing utting Prefinished s 2 Application Instructions 1 4' x 8' Panels Technical Notes:, & abinet Refacing Options (hapter U) Sheet Stock options available for refacing with SolidTone Finish/olor: Non-Adhesive Resin Back and A (Peel & Stick) Wood Back HDF and & & ( ore and ore) Note: When applying a SolidTone Finish/olor to A (Peel & Stick) Wood Back, the only SS that are available will be 2' x 8' [609.6mm x mm], 2' x 4' [609.6mm x mm] and 24" x 32" [609.6mm x 812.8mm]. Sheet Stock options available for refacing with SolidTone WoodGrain Finish/olor: Non-Adhesive Resin Back & A (Peel & Stick) Wood Back and ( ore and ore) Note: When applying a SolidTone WoodGrain Finish/olor to A (Peel & Stick) Wood Back, the only SS that are available will be 2' x 8' [609.6mm x mm], 2' x 4' [609.6mm x mm] and 24" x 32" [609.6mm x 812.8mm]. Finish Options (hapter R) and, & ⅜", HDF and are only finished on the face of the panel (1S). Minimal over spray onto the edges and back of product will be considered acceptable. ½", ⅝", 11 /16", and 1" & is finished on the face and back of the panel only (2S). Minimal over spray onto the edges of the product will be considered acceptable. A 2S finish for these products is recommended and is Walzraft's standard method as it helps to balance the product and minimize warpage. With thicker material it is more difficult to correct warpage during installation or a product's ability to lay flat when it is not properly balanced. You may choose a 1S finish for these products, but minimal over spray onto the edges and back will be considered acceptable and there will be no warranty against warpage. If over spray is not acceptable, Walzraft can mask the edges and back during the finishing process, but additional charges will apply. If a 1S finish is desired for these products, please indicate this, and whether or not over spray is acceptable, in the Special Instructions section of the order form. Miscellaneous When cutting prefinished wood veneers, Walzraft recommends the use of some type of veneer saw, razor knife or trim router to produce a clean cut. We do not recommend the use of a laminate slitter on pre-finished wood veneers as this can sometimes leave a jagged edge. When choosing to use a laminate slitter, it is recommended that you cut the piece oversized, secure in place and then rout flush to produce a smooth, clean edge. Manufacturer s guidelines for suggested application will be provided with each order. Walzraft and its suppliers will warranty product, provided the material was properly installed. Sizes / Dimensions 4'x8' panels are considered 95% free from defect on the face of the product. If you require panels to be 100% free from defect on the face, please order Precision ut to Size (PTS). All materials originate from a 4'x8' sheet. ut to Size includes cuts to both the width and height. PTS items will be square and the exact size ordered. Pieces will not be oversized. Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. Rip to Rough Width (RTRW) and Rough ut to Stock Sizes (SS) would be 95% free from defect on the face, not 100% free. Both dimensions are not being cut to size. 1 Birch, herry, Pine, Hard & Soft Maple Wood Specie Options (hapter S) To minimize any color mismatch between veneer refacing materials and solid wood products for these wood species, Walzraft recommends using a Spray No Wipe stain process on the entire job, for a blotch free finish. 99.7% American Made.1.5
5 Sheet Stock Options s, & HDF High Density Fiberboard Pressure Sensitive (3M A) Peel & Stick Non-Adhesive HDF.125" [3.2mm] (5'x8') ore, A4.165" [4.2mm] +/-.010" (8'x4') ore, A4.165" [4.2mm] +/-.010" ore, A4.156" [4.0mm] Wood Back.036" [0.9mm] Paper Back.023" [0.6mm] Paper Back.023" [0.6mm] Wood Back.036" [0.9mm] Resin Back.037" [0.9mm] +.008"/-.007" Part #185 Availability harts SS = Rough ut to Stock Sizes (Only) - 4x8, 2x8, 4x4, 2x4, 24x32 HDF: 60x96, 30x96,60x48, 30x48-4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS 8x4 Only SS SS SS RTRW PTS SS SS SS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade X X X X X X X X X X X X X X X X X X X AFRORMOSIA ALDER X X X X X ANIGRE-MEDIUM FIGURE Mill Grade X X X Brown - X X X X X X White - X X X ASH Flat Grain X X X Vertical Grain X X X Flat Grain X X X Vertical Grain X X X X X X X X X Blond BAMBOO aramelized BEEH-EUROPEAN Steamed - Baltic - Mill Grade alico - Select / Premium X X X X X X X X X X X X X X X Red - X X X X X X Red - X X X X X X White - X X X X X X X X X X X X BIH X X X X X X BUTTERNUT No Sap - X X X X X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X HERRY Ultra X X X No Sap (Straight Grain) X X X YPRESS X X X ELM-RED Mill Grade Eucalyptus-Lyptus X X X X Eucalyptus-Red Grandis X X X FIR-DOUGLAS Rift Sawn (Straight Grain) Reconstituted X HDF Raw Paint Grade X X X Brown - X X X X X X alico - X X X X X X X X X X X X X X X X X X X X X X X X X X X HIORY Ultra White - X X X X X X JATOBA Mill Grade X X X.1.6 (Phone) :00AM - 4:30PM ST (24 Hour Fax)
6 s, & Sheet Stock Options HDF High Density Fiberboard Pressure Sensitive (3M A) Peel & Stick Non-Adhesive HDF.125" [3.2mm] (5'x8') ore, A4.165" [4.2mm] +/-.010" (8'x4') ore, A4.165" [4.2mm] +/-.010" ore, A4.156" [4.0mm] Wood Back.036" [0.9mm] Paper Back.023" [0.6mm] Paper Back.023" [0.6mm] Wood Back.036" [0.9mm] Resin Back.037" [0.9mm] +.008"/-.007" Part #185 Availability harts SS = Rough ut to Stock Sizes (Only) - 4x8, 2x8, 4x4, 2x4, 24x32 HDF: 60x96, 30x96,60x48, 30x48-4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS 8x4 Only SS SS SS RTRW PTS SS SS SS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE X X X (HAYA) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X MAHOGANY-SIPO (HAYA) MAHOGANY - SAPELE Birds Eye - X X X X X X urly - alico - X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X (Straight Grain) X X X MAPLE - HARD MAPLE - SOFT Wormy Grade Raw Paint Grade X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X X X X X X X X X X X X X X X OA-RED Rift Sawn (Straight Grain) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X OA-WHITE Rift Sawn (Straight Grain) notty Grade X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X PINE-NORTHERN WHITE alico - Green - X X X X X X White - POPLAR X X X X X X X X X X X X X X X X X X X X No Sap - X X X X X X X X X X WALNUT Architectural Grade s Please see Section.2. All Other Wood Species Please call for quote and availability. 99.7% American Made.1.7
7 Sheet Stock Options s, & ⅜" ore A or B Face ore, A4 ore, A4 ore, A1 Part #185 Availability harts.250" [6.4mm] +0"/ ".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005" SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.375" [9.5mm].250" [6.4mm] Various Grade Backs Drawer Box Bottom (8'x4') (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8 x 4 Only SS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X X X X ALDER ANIGRE-MEDIUM FIGURE Mill Grade Brown - X X X White - ASH Flat Grain X X X Vertical Grain X X X Blond BAMBOO Flat Grain X X X Vertical Grain X X X X X X X X X aramelized BEEH-EUROPEAN Steamed - Baltic - Mill Grade alico - X X X X X X X X X X X X X X Red - X X X Red - White - X X X X X X X X BIH BUTTERNUT No Sap - X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X HERRY Ultra X X X X X X X X X No Sap (Straight Grain) YPRESS ELM-red Red - Mill Grade eucalyptus-lyptus X X X eucalyptus-red grandis FIR-douglas (Straight Grain) Reconstituted HDF Raw Paint Grade Brown - X X X alico - Select Grade X X X X X X X X X X X X X X X X X X X X X X HIORY Ultra White - JATOBA Mill Grade.1.8 (Phone) :00AM - 4:30PM ST (24 Hour Fax)
![4mm] Various Grade Backs Drawer Box Bottom (8'x4') (See Section.1 - Product Spec.](/docs-images/46/21521031/images/page_7.jpg "atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8 x 4 Only SS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X X X X ALDER ANIGRE-MEDIUM")
8 s, & Sheet Stock Options ⅜" ore A or B Face ore, A4 ore, A4 ore, A1 Part #185 Availability harts.250" [6.4mm].250" [6.4mm] +0"/ ".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005".220" [5.6mm] +/-.005" SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.375" [9.5mm] Various Grade Backs Drawer Box Bottom (8'x4') (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8x4 Only SS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE (HAYA) X X X X X X MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE Birds Eye - urly - alico - X X X X X X X X X X X X X X X X MAPLE-HARD X X X X X X X X X X X X (Straight Grain) MAPLE-SOFT Wormy Grade Raw Paint Grade X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X X OA-RED X X X X X X X X X X X X Rift Sawn (Straight Grain) X X X X X X X X X X X X X X X X X X X X X notty Grade X X X X X X X X X OA-WHITE Rift Sawn (Straight Grain) PINE-NORTHERN WHITE alico - X X X Green - X X X White - POPLAR X X X WALNUT X X X No Sap - X X X All Other Wood Species Please see page % American Made.1.9
![5mm] Various Grade Backs Drawer Box Bottom (8'x4') (See Section.1 - Product Spec.](/docs-images/46/21521031/images/page_8.jpg "atalog for ut/rip Size Descriptions) PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS 8x4 Only SS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE (HAYA) X X X X X X MAHOGANY-SIPO (HAYA)")
9 Sheet Stock Options s, & Part #185 Availability harts 15.2mm ore ⅝" ⅝" ore, A1 ⅝" ore, A1 12.0mm ore ½" ½" ore, A1 ½" ore, A1 SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size " +.02"/-.03".625" [15.9mm].625" [15.9mm].625" [15.9mm] +0"/-.015".472" +.02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X ALDER ANIGRE-MEDIUM FIGURE Mill Grade Brown - White - ASH Flat Grain Vertical Grain Flat Grain Vertical Grain Blond BAMBOO aramelized BEEH European Steamed - Baltic - Mill Grade X X X X X X alico - Select / Premium X X X X X X X X X X X X Red - Red - White - X X X X X X X X X X X X BIH BUTTERNUT No Sap - X X X X X X X X X X X X Gummy Grade X X X X X X X X X X X X X X X X X X X X X X X X HERRY Ultra (Phone) :00AM - 4:30PM ST (24 Hour Fax) No Sap (Straight Grain) YPRESS ELM-RED Mill Grade EUALYPTUS-LYPTUS EUALYPTUS-RED GRANDIS FIR-DOUGLAS (Straight Grain) Reconstituted HDF Raw Paint Grade Brown - alico - Select / Premium X X X X X X Ultra HIORY White - JATOBA Mill Grade
![472" +.02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec.](/docs-images/46/21521031/images/page_9.jpg "atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X ALDER")
10 s, & Sheet Stock Options Part #185 Availability harts 15.2mm ore ⅝" ⅝" ore, A1 ⅝" ore, A1 12.0mm ore ½" ½" ore, A1 ½" ore, A1 SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size.598" +.02"/-.03".625" [15.9mm].625" [15.9mm].625" [15.9mm] +0"/-.015".472" +.02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec. atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE (HAYA) MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE Birds Eye - urly - alico - MAPLE-HARD X X X X X X X X X X X X X X X X X X X X X X X X Wormy Grade (Straight Grain) MAPLE-SOFT Raw Paint Grade X X X X X X Ultra X X X X X X X X X X X X X X X X X X X X X X X X OA-RED notty Grade Rift Sawn (Straight Grain) 99.7% American Made OA-WHITE Rift Sawn (Straight Grain) PINE-NORTHERN WHITE alico - Green - White - POPLAR WALNUT No Sap - All Other Wood Species Please call for quote and availability..1.11
![02"/-.03".500" [12.7mm].500" [12.7mm].500" [12.7mm] +0"/-.015" (See Section.1 - Product Spec.](/docs-images/46/21521031/images/page_10.jpg "atalog for ut/rip Size Descriptions) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE (HAYA)")
11 Sheet Stock Options s, & 1" ore, A1 ore A or B Face ore AA Face 18.0mm ore ¹¹/16" ¹¹/16" ombi-ore Part #185 Availability harts 1.00" [25.4mm] +0"/-.015" +0"/-.015".709" +.03"/-.04".687" [17.4mm].687" [17.4mm] SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size #1 Grade Back Door Grade (See Section.1 - Product atalog for ut/rip Size Desc.) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade AFRORMOSIA X X X X X X ALDER ANIGRE-MEDIUM FIGURE Mill Grade Brown - White - ASH Flat Grain Vertical Grain Flat Grain Vertical Grain Blond BAMBOO aramelized BEEH-EUROPEAN Steamed - Baltic - Mill Grade X X X alico / Mixed - X X X X X X Red - Red - White - X X X X X X BIH BUTTERNUT No Sap - X X X X X X Gummy Grade X X X X X X HERRY X X X X X X Ultra No Sap (Straight Grain) YPRESS ELM-RED Mill Grade EUALYPTUS-LYPTUS EUALYPTUS-RED GRANDIS FIR-DOUGLAS (Straight Grain) Reconstituted HDF Raw Paint Grade Brown - alico / Mixed - X X X X X X X X X X X X HIORY Ultra White - JATOBA Mill Grade.1.12 (Phone) :00AM - 4:30PM ST (24 Hour Fax)
12 s, & Sheet Stock Options 1" ore, A1 ore A or B Face ore AA Face 18.0mm ore ¹¹/16" ¹¹/16" ombi-ore Part #185 Unfinished Square Foot Prices 1.00" [25.4mm] +0"/-.015" +0"/-.015".709" +.03"/-.04".687" [17.4mm].687" [17.4mm] SS = Rough ut to Stock Sizes (Only) 4x8, 2x8, 4x4, 2x4, 24x32 PTS = Precision ut to Size #1 Grade Back Door Grade (See Section.1 - Product atalog for ut/rip Size Desc.) SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS SS RTRW PTS Wood Speceis olor/grain Grade MAHOGANY-GENUINE (HAYA) Birds Eye - urly - alico / Mixed - MAHOGANY-SIPO (HAYA) MAHOGANY-SAPELE (HAYA) X X X X X X X X X X X X MAPLE-HARD X X X X X X X X X X X X X X X X X X (Straight Grain) Wormy Grade MAPLE-SOFT Raw Paint Grade X X X X X X X X X X X X X X X X X X X X X X X X Ultra X X X X X X X X X X X X OA-RED notty Grade Rift Sawn (Straight Grain) OA-WHITE Rift Sawn (Straight Grain) PINE-NORTHERN WHITE alico - Green - White - POPLAR WALNUT No Sap - All Other Wood Species Please call for quote and availability. 99.7% American Made.1.13
when it matters, choose wisely
Place your order securely online HERE. 4 x 8 Paperbacked Veneer FlexVen 10 and FlexVen 20 to tight radii as well as flat surfaces. The FlexVen 10 mil backer is very flexible and is a great choice for pressing
DIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
How to Build a Poker Table
How to Build a Poker Table www.pokertablematerials.com 10-Person Poker Table- 96 x 48 These are step by step instructions for building a poker table. The table will measure 48" x 96" and have a 4" wide
KITCHENS. Tip PAGE 1 FITTING YOUR KITCHEN GUIDE. How to mark out a kitchen. Tools required for installing a kitchen STEP ONE STEP TWO STEP THREE
FITTING YOUR KITCHEN GUIDE How to mark out a kitchen PAGE 1 Before starting on the installation, measure 870mm from the lowest point of the floor and mark a datum line around the room to indicate where
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom
Installing Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
STAIR TREAD & RISER INSTALLATION GUIDELINES
STAIR TREAD & RISER INSTALLATION GUIDELINES ARTISTIC FINISHES DOES NOT WARRANTY THE COMPLETENESS OR ACCURACY OF ANY INSTALLATION. THE INSTALLATION CONTRACTER MUST HAVE THE EXPERIENCE AND KNOWLEDGE TO COMPLETE
I N F I N I T R I M V I N Y L - L A M I N A T E D I N T E R I O R T R I M
I N F I N I T R I M V I N Y L - L A M I N A T E D I N T E R I O R T R I M The InfiniTrim System is specifically designed to provide interior trim for both standard and specialty shaped Great Lakes windows
The tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
Units of Measure and Conversion Factors for Forest Products
Units of Measure and Conversion Factors for Forest Products Bulletin #7103 Knowledge of the common units of wood measurement is important to people who are involved in marketing forest products. These
Stair Parts Installation. Tricks
Stair Parts Installation Tips & Tricks Introduction Your DIY staircase guide Welcome to the Stairpart home installation guide. Your stairway is both a functional and focal point in your home, so keeping
SHELVES. www.tedswoodworking.com
SHELVES It's rare that bookshelves look as interesting as the objects you display on them. After all, how much can you decorate the edges of your shelves and sides? This unit is unusual because the shelves
Gate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
In Stock Selection. Interior Doors
Scherer Bros. Lumber Co. Millwork Solutions Doors In Stock Selection Raised Panel Doors The style and warmth of fine wood make statements of quality and traditional elegance. Scherer Bros. carries the
Build Your Own Kitchen Cabinets
HOME IMPROVEMENT Build Your Own Kitchen Cabinets RAISED PANELS BEVELED GLASS LIGHTED VALANCE / 8 " INSET DRAWERS 40 If you ve dreamed of building a kitchen full of cabinets, stop dreaming and start building.
Router Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
How to Install Hardwood Flooring Over a Sub Floor
How to Install Hardwood Flooring Over a Sub Floor Installation Preparation Instructions Read the entire instructions before starting your project. 1) INSPECT EACH PLANK (see fig. a) Wood is a natural product
Wine Rack & Glass Storage Bench Chris Gardner
Wine Rack & Glass Storage Bench Chris Gardner Quantity Length Width Material Part 2 48 16 3/4 birch plywood top, bottom 2 14 16 3/4 birch plywood sides 2 14 13 3/4 birch plywood support dividers 2 3 15
INTERGOVERNMENTAL STANDARD GOST 3916.1-96
INTERGOVERNMENTAL STANDARD GOST 3916.1-96 Plywood with outer layers of deciduous veneer for general use. Contents DESCRIPTION GENERAL USE PWOOD CLASSIFICATION AND DIMENSIONS( table1,2) TECHICAL REQUIREMENTS
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide. GeneralShale.com
OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide GeneralShale.com OLD BRICK ORIGINALS THIN BRICK VENEER Page 2 INTRODUCTION Check local building codes for proper installation guidelines
Please calculate with around 5% more square meters than needed because you will have material loss due to cutting and sorting.
1. TEKA Soft Loc Installation Guide Thank you for having chosen TEKA Parquet. To guarantee a constant quality product TEKA engineered hardwood flooring is made out of selected wood species and runs only
CONTEMPORARY - TRANSITIONAL RECEPTION STATIONS
Reception stations, the first impression expressed to visitors in your office. Transitional styling to coordinate with your other office settings, available in a selection of 16 walnut, cherry, oak, maple
XL4000 RADIAL ARM SAW BLADES XL4000 CROSS CUT SAW BLADES S07 S03/S09 PART NO. DIAM. KERF PLATE BORE TEETH S07250* 10".135".
S07 XL4000 RADIAL ARM SAW BLADES Tooth configuration: 4 & 1 Raker XL4000 hook angle reduces the tendency of the blade grabbing the material 0 For cross cutting and ripping dry soft and hardwoods On radial
Making Laminated Rolling Pins
Making Laminated Rolling Pins Introduction Why go to the trouble to make a rolling pin when you can go down to your local discount store and buy one that works just fine for less than $5? As wood turners,
<Subhead> Your Simple, Step-By-Step Guide for Replacing or Upgrading Kitchen Cabinets
HD Supply, Inc. Kitchen Cabinet Brochure Copy: Denny Bulcao, Jr. (Posted with the written consent of HD Supply, Inc.) Front Cover: Kitchen Cabinets Guide Your Simple, Step-By-Step
casual tables P RO D U C T M A P...1 3 5 C A S U A L TA B L E B A S I C S...1 3 6 E D G E T R I M S T Y L E O V E RV I E W...1 3 7
P RO D U C T M A P...................................1 3 5 C A S U A L TA B L E B A S I C S..............................1 3 6 E D G E T R I M S T Y L E O V E RV I E W........................1 3 7 U S
LACQUERED HDF RAW HDF. Kronospan-MOFA Hungary Kft. has become one of the biggest and most modern producers of thin boards of Europe today.
Kronospan-MOFA Hungary Kft. has become one of the biggest and most modern producers of thin boards of Europe today. The goal of our company with its products is to fully meet market requirements, the respective
Owner s Guide to Understanding Checks in Glued Laminated Timber
Owner s Guide to Understanding Checks in Glued Laminated Timber ENGINEERED WOOD SYSTEMS Checking In Glued Laminated Timber Glued laminated timber (glulam) is an engineered wood product that is used in
JOB READY ASSESSMENT BLUEPRINT PAINTING AND DECORATING. Test Code: 2060 Version: 01
JOB READY ASSESSMENT BLUEPRINT PAINTING AND DECORATING Test Code: 2060 Version: 01 Specific Competencies and Skills Tested in this Assessment: Wood Finishes Identify thinning products Identify wood finish
AMERICAN GOTHIC PLAYHOUSE
AMERICAN GOTHIC PLAYHOUSE Project Plan #856 Sheet 1 of 5 Pick a spot and get started with the beautiful that your kids will love. The design of the playhouse includes 35 square feet of interior space plus
The Hive Bodies. In the Beekeeper s Work Shop. Building a Bee Hive: The Hive Bodies. by Stephen E. Tilmann
The Hive Bodies In the Beekeeper s Work Shop The hive body is the heart of a managed bee hive colony (Figure 1). It is where the queen lays her eggs, the house bees raise the brood and the workers store
Eucaboard / Eucaplac/ Eucatile paneling is intended for dry interior use only and requires care in handling.
i This instruction sheet describes the proper methods for installing Eucatex decorative wall paneling. Eucaboard / Eucaplac/ Eucatile paneling is intended for dry interior use only and requires care in
Window Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
Cedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
Important Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
Frequently Asked Questions
What materials can I cut with the ScanNCut machine? The ScanNCut machine was developed with fabric cutting in mind. However, it is great for paper, cellophane, acetate, leather, craft vinyl, wood veneer,
Build a Precision. Crosscutting Sled
Build a Precision Crosscutting Sled On-the-money, splinter-free crosscuts are well within your grasp using most well-made tablesaws, but you do have to do a few things to ensure great results cut after
VC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
Here is your set of Detailed Plans from Copyright 2004 All Rights Reserved
Here is your set of Detailed Plans from Copyright 2004 All Rights Reserved Materials for the House Here is the list of materials you will need to construct the basic house then to cover it with roofing
Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair
49 Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair In this chapter: The Over-the-Post Balustrade System Determining the Rail Centerline Using Rail Bolts Making a Pitch Block Laying Out
Don Stephan. A TRADITIONAL ARTISAN FURNITURE MAKER Making custom furniture and gifts to strengthen family and celebrate friendships
Don Stephan A TRADITIONAL ARTISAN FURNITURE MAKER Making custom furniture and gifts to strengthen family and celebrate friendships DINING TABLE DESIGN CONSIDERATIONS Primary sources of information for
98 Turbine Vulcan Build photos
98 Turbine Vulcan Build photos Just some of the useful tools needed plus a quality razor plane FUSELAGE Note: Fitting parts back to front is an easy mistake to make with this build, so mark all part with
Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art
D O O R F R A M E S Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers Industries
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
R e q u e s t f o r Q u o t e s H a r d w o o d S w i t c h T i e s 15-15 2 0 1 3, 2 0 1 4, 2 0 1 5 C a p i t a l M a i n t e n a n c e P r o g r a m
R e q u e s t f o r Q u o t e s H a r d w o o d S w i t c h T i e s 15-15 2 0 1 3, 2 0 1 4, 2 0 1 5 C a p i t a l M a i n t e n a n c e P r o g r a m The Northern New England Passenger Rail Authority (NNEPRA),
APPEARANCE GRADING OF SAWN OAK (French grading rules as published by APECF Association Pour la Promotion des Emplois du Chêne et du Hêtre Français)
APPEARANCE GRADING OF SAWN OAK (French grading rules as published by APECF Association Pour la Promotion des Emplois du Chêne et du Hêtre Français) Foreword Accepted by the member countries of the European
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
WEST VIRGINIA SPLIT RAIL
West Virginia Split Rail The Original Untreated with Locust Post Product Summary The locust fence post was first put into commission by the early Appalachian settlers because of its superb strength and
QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS
QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with Glass Infill... 2 Installing AZEk Rail Stairs with Glass Infill... 9 Notes...14 Please read all instructions completely
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
Denco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
Architectural Millwork Mfg. Co. Catalog
Architectural Millwork Mfg. Co. Catalog MOLDING & PANELING SPECIALIST Box 2809 2125 Cross Street Eugene, Oregon 97402 (800) 685-1331 (541) 689-1331 Fax: (541) 689-3662 E-mail: archmill@archmillwork.com
Above Parr Hardwood Floors, Inc. www.aboveparr.com 303.333.PARR (7277) Serving Colorado since 1987. New Floor Installation. Sand, Fill and Refinish
Above Parr Hardwood Floors, Inc. www.aboveparr.com 303.333.PARR (7277) Serving Colorado since 1987 New Floor Installation Sand, Fill and Refinish Screen & Coat Water Damage & Repairs Stairs, Trim and Vents
We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
Children s Furniture Projects
This is an excerpt from the book Children s Furniture Projects by Jeff Miller Copyright 2002 by The Taunton Press www.taunton.com CHILD S ROCKER KIDS ARE ALWAYS IN MOTION. It s not easy to get them even
Glulam Appearance Classifications for Construction Applications
T E C H N I C A L N O T E Glulam Appearance Classifications for Construction Applications Number Y110C July 2010 This Technical Note clarifies the distinction between appearance considerations and structural
WELCOME. Recommended Window Installation. 1.5 credits Minnesota Department of Labor and Industry
WELCOME Recommended Window 1.5 credits Minnesota Department of Labor and Industry In accordance with the Department of Labor and Industry s statute 326.0981, Subd. 11, This educational offering is recognized
Picnic Table Plans. Made out of a single sheet of plywood, it s also portable! By Kevin Ayer. This children's picnic table would
Picnic Table Plans Made out of a single sheet of plywood, it s also portable! By Kevin Ayer Materials One 4- by 8-foot sheet of 3 4-inch AC plywood Twelve 11 4-inch wood screws Primer and exterior paint
Wood is a substance which is "perfect for flooring because it is elastic and flexible", according to A Splintered History of Wood by Spike Garlsen.
Wood flooring Source: http://en.wikipedia.org/wiki/wood_flooring Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Bamboo flooring
FRAMED & MOUNTED TILE MURAL
Page 1 of 5 There is no denying that tile murals have taken the sublimation industry by storm. The unique ability to take a customer s artwork or high resolution photograph, tile it using your software
Great Beginnings. Merillat Essentials
Great Beginnings. Merillat Essentials Sensibility+you. Where it all begins. The start of a meal. The core of the home. The center of life. The kitchen brings together all of the elements of life, and Merillat
INTRODUCTION UNDERSTANDING THE KONIG COLOUR RANGE
INTRODUCTION HEINRICH KONIG & CO is widely regarded as the market leader in the Touch-up & Repair Market. This reputation has been built over 100 years of supplying and developing new and innovative product
TRADITIONAL CONFERENCE ROOM FURNITURE
Standard Profile Options MEP - Montebello Profile GEP - Georgian Profile FEP - Franklin Profile Traditional styling available in a wide variety of sizes and configurations. Edge details and bases are available
STRELAM. Decorative laminate. Plain colours Woodgrains Real wood veneers Metallics Fantasy designs. www.falconpp.co.uk
STRELAM Plain colours Fantasy designs www.falconpp.co.uk STRELAM An exclusive range of laminates from Falcon Panel Products, selected for use in commercial environments including interior projects, doors,
Flame Spread Performance of Wood Products
Flame Spread Performance of Wood Products Wood and wood-based products are widely used in interior wall, ceiling, and floor surfaces in all types of buildings. Appearance, acoustical qualities, and interior
TECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
SPLITS AND CRACKS IN WOOD
SPLITS AND CRACKS IN WOOD Fred M. Lamb, Professor Virginia Tech Blacksburg, Virginia INTRODUCTION Splits and cracks in wood are ruptures or separations in the grain of the wood which reduce the quality
TRADITIONAL RECEPTION STATIONS
TRADITIONAL Reception stations, the first impression expressed to visitors in your office. Traditional styling to coordinate with your other office settings, available in a selection of 15 walnut, cherry,
Panel/Hand Saw Kit Assembly Instructions
Panel/Hand Saw Kit Assembly Instructions PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE BEGINNING Brief Summary You will be performing the following Tasks: 1. Determining the degree of shaping laying out
Unlike a porch, which is protected by a roof,
Rehabbing a Rotted 34 Professional Deck Builder January/February 2013 Porch Stair A template helps to fit the bottom tread neatly around the posts by Emanuel Silva Unlike a porch, which is protected by
Synergy Wood Products, Inc.
Grading of Lumber Even though each type of wood has its own grading system, the purpose of grading lumber is the same; a method to communicate between buyer and seller of what is and isn't acceptable.
K2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
2.9 WINDOW & DOOR BUCKS
2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place
LP OSB Sheathing & Structural 1 Sheathing
Rated OSB Sheathing Roof Panels Span Ratings Max. Live Load Thickness Span Rating for Roofs (lbs)** 3/8" 24/0 30 7/16" 24/16 40 15/32" 32/16 70 1/2" 32/16 70 19/32" 40/20 130 23/32" 48/24 175 1-1/8" 48
SUPER SHED. Indoor shelter for your outdoor tools.
SUPER SHED Indoor shelter for your outdoor tools. Not everyone needs a garden shed. But, if you've no more space on your garage wall for that new leaf rake, if you can't find your potting trowel because
FF+E Package 1: Casegoods Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1
FF+E Package 1: Casegoods Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 Issue Date: 3/3/2009 Each furniture item scheduled in this specification manual is assigned a "key" code; each key code is crossreferenced
How To Level A Subfloor
Skill Level: INTERMEDIATE Give these projects a try if you're a confident DIYer with a good working knowledge of a variety of tools. They can take a day or more to complete. If you can build a birdhouse
REQUEST FOR QUOTE. Material $ Labor/Installation $ tax $ Total $ Material $ Labor/Installation $ tax $ Total $
REQUEST FOR QUOTE Specifications- Knightdale Station Park Naming Rights Exterior Signage General Conditions 1. Delivery of signs to be within 6 weeks of order confirmation. 2. Shop drawings are required
3 Pocket Purse by Sherry Titzer - http://www.atimetostitch.com
3 Pocket Purse by Sherry Titzer - http://www.atimetostitch.com Purse size - 10 H x 12 ½ W (3 1/2 wide flat bottom) See text file for supply list & cutting instructions Both Front curved side pockets designs
CANYON RIDGE. collection LIMITED EDITION SERIES ULTRA-GRAIN SERIES. clopay.com
CANYON RIDGE collection LIMITED EDITION SERIES ULTRA-GRAIN SERIES Canyon Ridge Collection Limited Edition Series Design 13 Shown in Dark Finish with Mahogany Cladding, Mahogany Overlays and REC13 Window
Flex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
Easy Six Cube Bookshelf. Copyrighted Material. Page 1
Compare to: Land of Nod Cube Collection, 6 Cube Bookshelf Skill Level: Beginner Easy Six Cube Bookshelf I love the storage cubes in kids rooms because they give you an opportunity to have your children
INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS
2009 Pella Corporation INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS Part Number: 80WH0100 Installation Instructions for Typical Wood Frame Construction.
Side Hinged Doors GSW 40-L
Side Hinged Doors GSW 40-L GARAGE DOORS AND SIDE DOORS IN A WIDE RANGE OF DESIGNS NUMEROUS FINISHES, SURF ACES, COLOURS AND GLAZING ELEMENTS Extremely robust and highly insulating Superior quality Teckentrup
Circular saw benches Safe working practices
Circular saw benches Safe working practices HSE information sheet Introduction This information sheet is one of a series produced by HSE s manufacturing sector. It gives practical guidance on safe working
2011 Herman Miller, Inc. O.Y2012. Herman Miller Envelop Desk
2011 Herman Miller, Inc. O.2012 envelop desk The First Desk Designed with Task Chairs in Mind Because the Envelop desk moves and encourages movement, it lets people take full advantage of the support offered
Kitchen planning guide.
Kitchen planning guide. Your kitchen plan. This guide is meant to help you start planning your new kitchen. Once completed, you can save, print or email the document to your designer or dealer as the first
Architectural Casework 06400-01. 1.01 Description of Work
06400-01 1.01 Description of Work A. Extent of each type of architectural millwork and casework as indicated on drawings. Types of architectural casework shall include both stained and plastic laminated
SCION tc 2005 - DASH APPLIQUE Preparation
Preparation Part Number: PTS10-21051 Kit Contents Item # Quantity Reqd. Description 1 1 HVAC Center Vent Trim 2 1 Radio Cover Assy (2 pieces) 3 1 HVAC Control Panel (3 pieces) 4 1 Shift Surround 5 1 Driver
HONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
Sidelights & Transoms for A-Series Hinged Doors
Sidelights & Transoms for A-Series Hinged Doors Parts Catalog Main Menu Section TOC Search What s in This Section Sidelights & Transoms............................................. Page 3 Parts Illustration...........................................................
CI SfB. (4-) Nn2. Onduline. Mini Profile. Onduline Garden Roof Range. Onduline Building Products Ltd
CI SfB (4-) Nn2 Onduline Mini Profile Onduline Garden Roof Range Onduline Building Products Ltd Onduline Garden Roof Range Onduline Mini Profile The new Onduline Mini Profile sheets have been designed
The corrugated box: A profile and introduction
The corrugated box: A profile and introduction 1 More than just a plain brown box Ninety to ninety-five percent of U.S. manufactured goods are shipped to consumers in corrugated containers. In fact, more
Core and Frame Details
and Frame Details February, 2014 Contents Architectural Flush Wood Door Codes 1-2 Performance Standards 3 GRAHAM SUPREME DOOR GSD SR 35-40 4 GSD SR 41-45 5 GSD SR 31, 33, 39, and 44 6 GSD SR 46-47 7 GRAHAM
December 2013. J-Ply Roofing, Flooring and Decking
December 2013 J-Ply Roofing, Flooring and Decking Introduction J-Ply plywood is manufactured in New Zealand by Juken New Zealand Limited (JNL) and marketed by New Zealand Wood Products Limited. The J-Ply
STAIRCASES I DOORS I WINDOWS
ARU JOINERY Timber Processing since 1994 WINDOWS DOORS STAIRCASES WINDOWS We offer timber and alu-clad windows in 3 basic varieties: CASEMENT, TILT & TURN, and SASH windows, with a vast array of design
11339 Georgia Ave Wheaton, MD 20902 phone: fax: 240.483.4975
11339 Georgia Ave Wheaton, MD 20902 phone: fax: 240.483.4975 Thank you for choosing Counter Culture to template, fabricate and install your new countertops. We will do our best to delight you with our
SEGMENTED WOODTURNING
Notes on: SEGMENTED WOODTURNING Malcolm Tibbetts www.tahoeturner.com malcolm@tahoeturner.com (530) 541-6135 MATHEMATICAL FORMULAS AND CONCEPTS: A circle contains 360 Circumference = Diameter x π(3.1416)