ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #1 to ISO #3
|
|
|
- Rudolf Townsend
- 7 years ago
- Views:
Transcription
1 ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO # to ISO #3 Specially coated glandless spool and sleeve for extreamly long life Available with integral flow regulators on ISO # and #2 sizes Low power solenoids and manual override as standard Wide range of sub-bases and accessories Save money on cylinder mounted flow controls by having them built-in to the valve TECHNICAL DATA Medium: Compressed air, filtered, lubricated, non lubricated and dry. Operation: Maximum 6 bar, see table for individual details. : ISO # 230 l/min ISO # l/min ISO # l/min Ambient temperature: -5 C to +50 C solenoid models -5 C to +80 C pilot models. Consult our Technical Service for use below +2 C. 5/2 VALVES - Solenoid actuated, internal pilot supply, industrial standard 22 mm coil pressure 24 DC ISO 230,8..0 SXE9573-A8-00/3J SXE9573-A8-00/9J Sol/Spring ISO ,8..0 SXE9574-A8-00/3J SXE9574-A8-00/9J ISO ,8..0 SXE9575-A7-00/3J SXE9575-A7-00/9J ISO SXE9573-A80-00/3J SXE9573-A80-00/9J Sol/Air spring ISO SXE9574-A80-00/3J SXE9574-A80-00/9J ISO SXE9575-A70-00/3J SXE9575-A70-00/9J ISO SXE0573-A60-00/3J SXE0573-A60-00/9J Sol/Sol ISO SXE0574-A60-00/3J SXE0574-A60-00/9J ISO SXE0575-A50-00/3J SXE0575-A50-00/9J Note: ISO and 2 with integral flow regulators. 5/3 VALVES - Solenoid actuated, internal pilot supply, industrial standard 22 mm coil pressure 24 DC ISO SXE9673-A60-00/3J SXE9673-A60-00/9J APB ISO SXE9674-A60-00/3J SXE9674-A60-00/9J ISO SXE9675-A50-00/3J SXE9675-A50-00/9J ISO SXE9773-A60-00/3J SXE9773-A60-00/9J COE ISO SXE9774-A60-00/3J SXE9774-A60-00/9J ISO SXE9775-A50-00/3J SXE9775-A50-00/9J ISO SXE9873-A60-00/3J SXE9873-A60-00/9J COP ISO SXE9874-A60-00/3J SXE9874-A60-00/9J ISO SXE9875-A50-00/3J SXE9875-A50-00/9J APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. Note: ISO and 2 with integral flow regulators Others models, voltages and manual override availables please use the valve configurator. For further information
2 5/2 VALVES - Solenoid actuated, internal pilot supply, 30 mm coil - CNOMO models pressure 24 DC ISO 230,8..6 SXE9573-Z7-8/33N SXE9573-Z7-8/89N M/P5737 Sol/Spring ISO ,8..6 SXE9574-Z7-8/33N SXE9574-Z7-8/89N M/P5737 ISO ,8..6 SXE9575-Z7-8/33N SXE9575-Z7-8/89N M/P5737 ISO SXE9573-Z70-8/33N SXE9573-Z70-8/89N M/P5737 Sol/Air Spring ISO SXE9574-Z70-8/33N SXE9574-Z70-8/89N M/P5737 ISO SXE9575-Z70-8/33N SXE9575-Z70-8/89N M/P5737 ISO SXE0573-Z50-8/33N SXE0573-Z50-8/89N M/P5737 Sol/Sol ISO SXE0574-Z50-8/33N SXE0574-Z50-8/89N M/P5737 ISO SXE0575-Z50-8/33N SXE0575-Z50-8/89N M/P5737 5/3 VALVES - Solenoid actuated, internal pilot supply, 30 mm coil - CNOMO models pressure 24 DC 4 2 ISO SXE9673-Z50-8/33N SXE9673-Z50-8/89N M/P5737 APB ISO SXE9674-Z50-8/33N SXE9674-Z50-8/89N M/P5737 ISO SXE9675-Z50-8/33N SXE9675-Z50-8/89N M/P ISO SXE9773-Z50-8/33N SXE9773-Z50-8/89N M/P5737 COE ISO SXE9774-Z50-8/33N SXE9774-Z50-8/89N M/P5737 ISO SXE9775-Z50-8/33N SXE9775-Z50-8/89N M/P ISO SXE9873-Z50-8/33N SXE9873-Z50-8/89N M/P5737 COP ISO SXE9874-Z50-8/33N SXE9874-Z50-8/89N M/P5737 ISO SXE9875-Z50-8/33N SXE9875-Z50-8/89N M/P5737 APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. 5/2 VALVES - Pilot actuated pressure 5/3 VALVES - Air pilot actuated pressure ISO 230-0,9..6 SXP Air/Spring ISO ,9..6 SXP ISO ,9..6 SXP ISO 230-0,9..6 SXP Air/Air ISO ,9..6 SXP ISO ,9..6 SXP Note: ISO and 2 with integral flow regulators ISO 230-0,9..6 SXP APB ISO ,9..6 SXP ISO ,9..6 SXP ISO 230-0,9..6 SXP COE ISO ,9..6 SXP ISO ,9..6 SXP ISO 230-0,9..6 SXP COP ISO ,9..6 SXP ISO ,9..6 SXP Note: ISO and 2 with integral flow regulators. APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. Others models, voltages and manual override availables please use the valve configurator. 93
3 ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO # to ISO #3 OTHER VARIANTS AVAILABLE, PLEASE USE THE VALVE CONFIGURATOR BELOW S X E ISO size ISO 3 ISO 2 4 ISO 3 5 Regulation (digit 9) Without regulation (double sol valve) 5 With regulation (double sol valve) 6 Without regulation (single sol valve) 7 With regulation (single sol valve) 8 Pressure 0 bar 6 6 bar 8 code For voltage code please see tables on page 97 Valve function 5/2 BI solenoid/solenoid 05 5/2 MO solenoid/air spring or solenoid/spring 95 5/3 APB solenoid/solenoid 96 5/3 COE solenoid/solenoid 97 5/3 COP solenoid/solenoid 98 Valve options CNOMO solenoid pilot actuated valves End solenoid pilot actuated valves Z A Pilot supply (digit 0) Internal pilot supply (double sol or air spring return) 0 Internal pilot supply (single sol) Lockable 0 Non NOTE: Not all combinations are stocked. Please check availability with our customer service. UM/ Complementary range ISO 4 Solenoid actuated valves pressure 24 DC Sol/Air Spring ISO ,5..0 UM/22456/72/6/3J UM/22456/72/6/9J Sol/Sol ISO UM/22456/23/6/3J UM/22456/23/6/9J APB ISO ,8..0 UM/22456/623/6/3J UM/22456/623/6/9J Air pilot actuated valves pressure Air/Spring ISO ,9..6 UM/22456/ Air/Air ISO ,9..6 UM/22456/3 4 2 APB ISO ,9..6 UM/22456/63 COE ISO ,9..6 UM/22456/63 APB = All Ports Blocked, COE = Centre Open Exhaust. 94
4 BASES AND VDMA SUB-BASES Side ported Straight Elbow Tube diameter in bold Silencer ISO M/P926 C C T40C2800 ISO 2 M/P932 C C T40C3800 ISO 3 M/P938 C C T40C4800 Side ported ISO 4 M/P T40C6800 Manifold and end plates Straight Elbow Tube diameter in bold Silencer Blanking disk Plugs ISO CQM/2252/3/2 C C FP ISO 2 CQM/22253/3/2 C C FP 82 - ISO 3 CQM/22354/3/2 C C FP Manifold ISO 4 CQM/22456/3/ ISO CQM/2252/3/22 C C T40C ISO 2 CQM/22253/3/22 C C T40C ISO 3 CQM/22354/3/ T40C End plates ISO 4 CQM/22456/3/ T40C Please see section 4 for others s UNIVERSAL BASE OPTIONS Straight Elbow Tube diameter in bold Silencer Blanking disk Plugs Modular base ISO CQM/2252/3/27 C C M/P Side&bottom ported ISO 2 CQM/22253/3/27 C C M/P End plate ISO CQM/2252/3/3 C C T40C End ports open ISO 2 CQM/22253/3/3 C C T40C Single pressure regulator plate Single pressure regulator plate Single pressure regulator plate Double pressure regulator plate Port reg. Port 2 reg. Port 4 reg. Ports 2+4 reg. ISO # V700-KB V702-KB2 V702-KB3 V702-KB4 ISO #2 V700-KC V702-KC2 V702-KC3 V702-KC4 ISO #3 V700-KD V702-KD2 V702-KD3 V702-KD4 95
5 ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO # to ISO #3 ELECTRICAL DETAILS FOR SOLENOID ACTUATED 22 mm Plugs according to Industrial Standard or DIN Table B, IP65 Connector Type Cable length a.c. d.c. Features Plug with moulded cable 22 mm Industrial standard 3000 mm 250 V 250 V M/P4333/3 Plug with cable gland 22 mm Industrial standard V V Indicator plug 22 mm Industrial standard V V Lamp M/P242/ Indicator plug 22 mm Industrial standard V V Neon M/P242/2 Plug with cable gland and indicator 22 mm Industrial standard V V Neon M/P242/3 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 24 V 24 V LED,VDR M/P4334/ Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 24 V 24 V LED,VDR M/P4334/3 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 0 V 0 V LED,VDR M/P4334/2 Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 0 V 0 V LED,VDR M/P4334/23 Indicator plug with moulded cable 22 mm Industrial standard 000 mm 220 V 220 V LED,VDR M/P4334/3 Indicator plug with moulded cable 22 mm Industrial standard 3000 mm 220 V 220 V LED,VDR M/P4334/33 Light emitting gasket 22 mm Industrial standard V V Green LED M/P40859 Light emitting gasket 22 mm Industrial standard V V Green LED M/P40886 Light emitting gasket 22 mm Industrial standard V V Green LED M/P40860 Indicator plug DIN43650 Form B 24 V LED Indicator plug DIN43650 Form B 250 V LED Indicator plug 22 mm Industrial standard 5 V, 30 V LED mm Plugs according to DIN Table A, IP65 Connector Cable length a.c. d.c. Features Plug with moulded cable 000 mm 250 V 250 V M/P4335/ Plug with moulded cable 3000 mm 250 V 250 V M/P4335/3 Plug with cable gland 250 V 300 V M/P5737 Plug with cable gland 240 V M/P97 Plug with cable gland 250 V 300 V Plug with cable gland V V Plug with cable gland V V Indicator plug V V Lamp M/P2420/ Indicator plug V V Neon M/P2420/2 Plug with cable gland and indicator V V Neon M/P2420/3 Indicator plug with moulded cable 000 mm 24 V 24 V LED,VDR M/P4336/ Indicator plug with moulded cable 3000 mm 24 V 24 V LED,VDR M/P4336/3 Indicator plug with moulded cable 3000 mm 0 V 0 V LED,VDR M/P4336/23 Indicator plug with moulded cable 000 mm 220 V 220 V LED,VDR M/P4336/3 Indicator plug with moulded cable 3000 mm 220 V 220 V LED,VDR M/P4336/33 Light emitting gaskets V V Green LED M/P4086 Light emitting gaskets V V Green LED M/P40880 Light emitting gaskets V V Green LED M/P
6 codes and spare coils for 0 bar solenoid models 22 mm Coil with connector interface acc. to Industrial Standard 22 mm Coil with connector interface acc. to DIN table B 30 mm Coil with connector interface acc. to DIN table A 2 V d.c. 2J 2 W QM/48/2J/2 24 V d.c. 3J 2 W QM/48/3J/2 3L 2 W V0626-A3L 23N,5 W V0633-A23N 24 V 50/60 Hz 4J 4/2,5 VA QM/48/4J/2 28N 2 VA V0633-A28N 0/20 V 50/60 Hz 8J 4/2,5 VA QM/48/8J/2 220/240 V 50/60 Hz 9J 6/5 VA QM/48/9J/2 codes and spare coils for 6 bar models (CNOMO only) 30 mm Coil with connector interface acc. to DIN table A 24 V d.c. 33N 4 W V0633-A33N 0/20 V a.c. 88N 8 VA V0633-A88N 230 V a.c. 89N 8 VA V0633-A89N Exhaust air can be noisy and dangerous to ears. Always fit a silencer. 97
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
Load-sensing control block in mono and sandwich plate design
Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Table of Contents. MicroAir Series...3-9
Table of Contents MicroAir Series...-9 Technical and Operating Data.... How to Order.... Valve on ndividual Base... 5 Manifold Assemblies... 6 End Plate Kits... 7 Blank Station Plate Kit.... 7 Blocking
Multi-talented. Valve and valve terminal series VG
Valve and valve terminal series VG Multi-talented. Highlights VUVG Compact with high flow rate Can be expanded to form a valve terminal with an individual connection 2x 3/2 one valve, two functions Simple
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05 GENERAL SECTION PAGE MOOG SERVO- AND PROPORTIONAL CONTROL VALVES General 2 enefits and Functionality 3 General
Control block EDD Modular Directional Valve
Control block EDD Modular Directional Valve 2 Control block EDD Modular Directional Valve Bosch Rexroth Oil Control S.p.A. introduces this innovatory Directional Control Valve size 8 which allows to create
Plug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
Type Function Namur Port size Max. air flow Operating pressure Weight
DRN 3 601/DRN PN 5313 701/PN 611 /DRN 5313 121 128 2.8.4.1.1 2.8.2.3 Seite page oldal 161 PNDRN 531 701 3 601 PNDRN 531 121 3 611 DRN 3 128 PN 531 701 DRN 3 601 BlockPneumatikus form flow regulator vezérlésű
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
Solenoid valves VOFC Key features
Valve series VOFC Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way valves for process automation, for use within chemical and petrochemical
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
DIRECTIONAL CONTROL VALVES
Series 35 High Flow High Pressure Directional Valves D05SD DIN Type D05S Electrical Box Type D03SD DIN Type D03S Electrical Box Type D03SL Lead Wire Type (D05SL Lead Wire Type Also available) FEATURES
2/2 & 3/2 Solenoid operated valves
2/2 & 3/2 Solenoid operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Grey cast iron Plastic resin PVDF Solenoids IP Protection class IP65 (with connector) Buschjost
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
GROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
WE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
Schematic symbols are used to identify and graphically depict the function of fluid power components. Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
SQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~ PRODUCT ADVANTAGES Switching principle with long life endurance due to a low friction contact system (ball),
High Flow High Pressure Solenoid Valve. Double 3/2 N.C. solenoid valve with manual override
Double 3/2 N.C. solenoid valve with manual override General The high pressure/high flow capacity solenoid valve, as not available on the market, was especially engineered by BIFFI in the early '70s for
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat