SEAMLESS STAINLESS STEEL PIPES
|
|
|
- Clifton Anthony
- 7 years ago
- Views:
Transcription
1 Seamless Stainless Steel Pipe ASTM 312 TP316/316L Dimension Specifications: ASTM A / ASME SA Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Material Specifications: TP316 TP316L Size Range: 1/8"NB 4 NB Wall Thickness: SCH 10S, 40S, 80S, 160S, STD, XS, XXS Finishing: Annealed and Pickled (AP) Recommended Bend Radius A bend radius of 3x the external tube diameter is recommended for cold bending of tubes with tube benders or by hand. (As per Figure 1) Welding Suitability Tubes made of TP316 & TP316L are suitable for arc welding according to usual techniques. The welding filler should be selected in accordance with DIN EN 1600 and DIN EN part 1 taking into account the type of application and the welding technique. R T Tube OD R Bend Radius Figure 1 Recommended Bend Radius T Chemical Composition: SS316/SS316L Chemical Composition in % C Mn P S Si Ni Cr Mo Min Max Mechanical Properties of the tubes at room temperature: SS316/SS316L Tensile Upper Elongation Yield Strength Point at rupture R m R eh A 5 N/mm 2 N/mm 2 % min. min. Min Max. 1
2 Elevated Temperature Factor Elevated Temperature Rating Factor is calculated using as per ASME B31.3. Dual Grades such as TP316/316L meet the requirements for the lower maximum carbon content of the L grades and the higher minimum yield and tensile strength of the non-l grades. F C Rating Factor
3 Ordering Information: PS AP - NB - 02 X 080 I II III IV V VI I Type of Item : PS Stainless Steel Pipes II Material Grade : 01 SS316/SS316L Plain End III Item Finish : AP Annealed & Pickled IV Size Designator : NB Norminal Bore Size V OD for tube : For Inch NB sizes Size 1/8" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" Code Size 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" Code VI Pipe Thickness : Size SCH10S SCH40S SCH80S SCH160S SCHXXS Code XXS 3
4 Seamless Stainless Steel Pipe ASTM 312 TP316/316L Working Pressure & Size Range Table Pipe Size NB (Inche) Pipe Size NB Outer Diameter, OD (MM) Wall Thickness (MM) Schedule Inner Diameter ID (MM) Working Pressure (BAR) Burst Pressure (BAR) Weight /6MTRS (KG) 1/ S STD / S XS / S STD / S XS / S / S STD / S XS / S STD / S XS / S / XXS / S STD / S XS / S / XXS S STD S XS S XXS / S STD / S XS / S / XXS / S STD / S XS / S / XXS S S STD S XS S XXS / S / S STD / S XS / S S S STD S S STD Note: Working Pressure Calculation: Calculated from ASME B31.1, with values from AMSE B31.3 4
5 Seamless Stainless Steel Pipe ASTM 312 TP316/316L Ordering Code No. Part Number Description 1 PS-01-AP-NB /8"NB x SCH40S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (10.3 x 1.73) 2 PS-01-AP-NB /8"NB x SCH80S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (10.3 x 2.41) 3 PS-01-AP-NB /4"NB x SCH40S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (13.7 x 2.24) 4 PS-01-AP-NB /4"NB x SCH80S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (13.7 x 3.02) 5 PS-01-AP-NB /8"NB x SCH10S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (17.1 x 1.65) 6 PS-01-AP-NB /8"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (17.1 x 2.31) 7 PS-01-AP-NB /8"NB x SCH80S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (17.14 x 3.20) 8 PS-01-AP-NB /2"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (21.3 x 2.77) 9 PS-01-AP-NB /2"NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (21.3 x 3.73) 10 PS-01-AP-NB /2"NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (21.3 x 4.75) 11 PS-01-AP-NB-08-XXS 1/2"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (21.3 x 7.47) 12 PS-01-AP-NB /4"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (26.7 x 2.87) 13 PS-01-AP-NB /4"NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (26.7 x 3.91) 14 PS-01-AP-NB /4"NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (26.7 x 5.56) 15 PS-01-AP-NB-12-XXS 3/4"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (26.7 x 7.82) 16 PS-01-AP-NB "NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (33.4 x 3.38) 17 PS-01-AP-NB "NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (33.4 x 4.55) 18 PS-01-AP-NB "NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (33.4 x 6.35) 19 PS-01-AP-NB-16-XXS 1"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (33.4 x 9.09) 20 PS-01-AP-NB /4"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (42.2 x 3.56) 21 PS-01-AP-NB /4"NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (42.2 x 4.85) 22 PS-01-AP-NB /4"NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (42.2 x 6.35) 23 PS-01-AP-NB-20-XXS 1 1/4"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (42.2 x 9.70) 24 PS-01-AP-NB /2"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (48.3 x 3.68) 25 PS-01-AP-NB /2"NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (48.3 x 5.08) 26 PS-01-AP-NB /2"NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (48.3 x 7.14) 27 PS-01-AP-NB-24-XXS 1 1/2"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (48.3 x 10.16) 28 PS-01-AP-NB "NB x SCH10S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (60.3 x 2.77) 29 PS-01-AP-NB "NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (60.3 x 3.91) 30 PS-01-AP-NB "NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (60.3 x 5.54) 31 PS-01-AP-NB "NB x SCH160S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (60.3 x 8.74) 32 PS-01-AP-NB-32-XXS 2"NB x SCHXXS x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (60.3 x 11.07) 33 PS-01-AP-NB /2"NB x SCH10S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (73.0 x 3.05) 34 PS-01-AP-NB /2"NB x SCH40S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (73.0 x 5.16) 35 PS-01-AP-NB /2"NB x SCH80S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (73.0 x 7.01) 36 PS-01-AP-NB "NB x SCH10S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (88.9 x 3.05) 37 PS-01-AP-NB "NB x SCH40S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (88.9 x 5.49) 38 PS-01-AP-NB "NB x SCH10S x 6 MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (114.3 x 3.05) 39 PS-01-AP-NB "NB x SCH40S x 6MTR SS316/316L SMLS PIPE,ANNEAL & PICKLE,PE (114.3 x 6.02) Note: Working Pressure Calculation: Calculated from ASME B31.1, with values from AMSE B31.3 5
6 Chuan Kok Hardware & Machinery Pte Ltd Address: 1783 Geylang Bahru #01-02, Kallang Distripark Singapore Telephone Number: Fax Number: Address: Website: Business Registration Number: Z Country of Registration: Singapore Conditions of Use of Catalogue The information in the catalogue are not binding and in order to improve distribution, Chuan Kok Hardware & Machinery Pte Ltd reserves the right to make any change including size and pressure ratings considered necessary at any time and without prior notice. According to the copyright and the civil law, any reproduction (also partial) of figures and texts of this catalogue by means of electronic, mechanical, photocopies, microfilms, recordings or other is forbidden without Chuan Kok Hardware & Machinery Pte Ltd s authorization. Catalogue Version:
A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
DIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
Seamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
SPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
JIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
North American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
Stainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
North American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
GENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS GALVANISED FINISH STANDARD LENGTHS AUSTRALIAN STANDARDS THICKNESS AND MARKING
STEEL PIPE MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS Grade C250 Pipe, for general mechanical and low pressure reticulation applications, is manufactured by cold-forming and high frequency Electric
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
ALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
Caps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
Seamless Tubes and Pipes for Power Plants
Seamless Tubes and Pipes for Power Plants Seamless tubes and pipes for Power Plants Features The boiler tubes and pipes are manufactured with materials able to withstand high temperatures and high pressures.
Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
ATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
S355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
Cold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
ALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
European Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
Material data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
North American Stainless
North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless
North American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f
Start the Design Study!
A Design Study in Centrifugal Steel Castings Hydraulic Accumulator Cylinder for Navy Submarines Design Study Outline Introduction Design for Performance Duplex Steel Approach Alloy Selection Design for
Bent cold drawn seamless tubes for energy applications. U-tubes, S-tubes and free form-tubes
Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes SMP International Salzgitter Mannesmann Précision Etirage plant, Vitry Le François, France Salzgitter Mannesmann
High tensile strength stainless fasteners
High tensile strength stainless fasteners BUFAB STAINLESS HISTORY 1674 Svartå Bruk was founded 1912 Svartå Bruk was incorporated into the Hasselfors group. 1947 Production of Stainless Steel Fasteners
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely
AUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
DX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
Tubular solutions for the Solar Power Industry Rise in success with precision
Tubular solutions for the Solar Power Industry Rise in success with precision A comprehensive offer Precision tubes designed for CSP industry applications Solar collectors q Tubes adapted for solar heat
ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
Specification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
Rely on Our Material Competence for Your Demanding Industrial Processes
Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
INFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
MATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
Section 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
Stainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2010 Number 28 EFFECT OF REDUCTION IN THREE-DRAWN AND TWO-DRAWN SINGLE-RUN TECHNOLOGY
Part B Repair Quality Standard for Existing Ships
Part B Repair Quality Standard for Existing Ships PART B SHIPBUILDING AND REPAIR QUALITY STANDARD FOR EXISTING SHIPS CONTENTS: 1. Scope 2. General requirements to repairs and repairers 3. Qualification
Duplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
Duplex stainless steels
Duple stainless steels 2202 2507 2304 2205 by ArcelorMittal ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
ADDA FERreport JANUARY 2015
ADDA FERreport JANUARY 2015 REPORT 2015 PREVIEW COMPLETE TUBE MILL TM8 FOR VIETNAM FABTECH & METAL EXPO 2014 JANUARY 2015 2015 PREVIEW The year 2014 has closed in a positive way for Adda Fer Meccanica,
AISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
FIBERGLASS REINFORCED PLASTIC (FRP) PIPING SYSTEMS DESIGNING PROCESS / FACILITIES PIPING SYSTEMS WITH FRP
FIBERGLASS REINFORCED PLASTIC (FRP) PIPING SYSTEMS DESIGNING PROCESS / FACILITIES PIPING SYSTEMS WITH FRP A COMPARISON TO TRADITIONAL METALLIC MATERIALS Prepared by: Kevin Schmit, Project Engineer Specialty
ASTM Material Specifications
ASTM Material Specifications The following is a chart from ANSI 16.34 1996 Version; Table 1 Material Specification Group 1 Materials Material Product Form Group No. Nominal Designation Forgings astings
Standard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
QSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
A World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
Technical Summary. Contract for Procurement of Piping and Fittings (IO/14/CFT/9560/ACS CP/1)
Technical Summary IO/14/CFT/9560/ACS CP/1 Technical Summary Contract for Procurement of Piping and Fittings (IO/14/CFT/9560/ACS CP/1) Purpose The purpose of this call for nomination is to establish a Framework
BUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
Hyper duplex stainless steel for deep subsea applications
Hyper duplex stainless steel for deep subsea applications This article looks at the development of hyper-duplex stainless steels by Sandvik (SAF Sandvik 3207 HD) for use in subsea umbilicals to connect
Valve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
High-Strength Low-Alloy Steels
High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to
Vandal-proof keypad series
Model No. LBKP35900 / LBKP35900E (Encryption available) Interface: PS2, USB available. Dimensions: 100mm x 91.5mm No. of keys: 16 keys, high quality stainless steel G.W.: 0.75kg. All languages version
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing Features 1/4 to 6 to 12 tubing sizes available in 316/316L stainless steel copper Seamless welded tubing available in stainless
China Yangzhou plant
China Yangzhou plant TM Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou
CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
Copper-Nickel Mill Products
Copper-Nickel Mill Products Copper-Nickel Rod, Sheet, Plate, and Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
RAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
Welding Alloys Group. TETRA S, TETRA V & TETRA SB Stainless flux cored wires
Welding Alloys Group TETRA S, TETRA V & TETRA SB Stainless flux cored wires Flux cored wires range Welding Alloys Group offer the world s largest range of flux and metal cored welding wires for low, medium,
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
PRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
Vrtné trubky Drill Pipe
Vrtné trubky Drill Pipe VRTNÉ ROURY - zušlechtěné závity - vysoká kvalita těla roury - svařeno třením - vysoká přímost vrtných tyčí - závity dle STN, API, DIN a GOST - délky dle přání zákazníka Průměr
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 2205 (S32205)/ EN 1.4462 (S31803) Introduction: SS2205 is a duplex stainless steel with a microstructure, when heat treated properly,