Tolerance +/- 0,5 mm, +/- 0,2 mm. Length mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
|
|
|
- Jocelyn Houston
- 8 years ago
- Views:
Transcription
1
2
3 Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter /8 x 36 Ibs/ft Slotted casing Grade carbon steel, Inox L ength 12 metres maximum ( standard) W.T. (mm) 4-60 mm maximum ( standard) Width 1-10 mm ( standard) Length mm ( standard) Tolerance +/- 0,5 mm, +/- 0,2 mm SLOTS
4 dia Wall thicknes weight of threaded pipe with coupling Grade Type of thread in mm inch mm lb/ft kg/m kg/ft 0,205 5,21 9,50 14,14 4,31 STC 0,224 5,69 10,50 15,69 4,76 STC,BTC 4 1/2 114,3 0,250 6,35 11,60 17,26 5,26, STC,LTC,BTC 0,290 7,37 13,50 20,19 6,12 0,337 8,56 15,10 22,47 6,85 P 0,220 5,59 11,50 17,11 5,22 STC ,253 0,296 6,43 7,52 13,00 15,00 19,35 22,32 5,90 6,80, STC,LTC,BTC STC, 0, ,00 26,79 8,16 0,244 6,20 14,00 20,83 6,35 STC 0,275 6,98 15,50 23,07 7,03 STC, 5 1/2 139,7 0,304 7,72 17,00 25,30 7,71, STC, 0,361 9,17 20,00 29,76 9,07 0,415 10,54 23,00 34,23 10,43 0,288 7,32 20,00 29,76 9,07 STC, 6 5/8 168,3 0,352 0,417 8,94 10,59 24,00 28,00 35,72 41,67 10,89 12,70, STC, 0,475 12,06 32,00 47,62 14,52 0, 272 6,91 20,00 29,76 9,07 STC 0,317 8,05 23,00 34,23 10,43 N,L,,C STC, 7 0,362 0,408 9,19 10,36 26,00 29,00 38,69 43,16 11,79 13,15, STC, 0,453 11,51 32,00 47,62 14,52 0,498 12,65 35,00 52,09 15,88 7 5/8 193,7 0,300 7,62 24,00 35,72 10,89 STC
5 0,328 8,33 26,40 39,29 11,98,N,L,C STC, 7 5/8 0,375 0,430 9,52 10,92 29,70 33,70 44,20 50,12 13,47 15,29 0,500 12,70 39,00 58,04 17,69 0,304 7,72 28,00 41,67 12,70 STC 0,352 8,94 32,00 47,62 14,52 STC, 8 5/8 219,1 0,400 10,16 36,00 53,57 16,33,N,L,C STC, 0,450 11,43 40,00 59,53 18,14 0,500 12,70 44,00 56,48 19,96 0,352 8,94 36,00 53,57 16,33 STC,LTC,BTC 0,395 10,03 40,00 59,53 18,14,N,L,C STC, 9 5/8 244,5 0,435 11,05 43,50 64,74 19,73 0,472 11,99 47,00 69,94 21,32 0,545 13,84 53,50 79,61 24,27 0,350 8,89 40,50 60,27 18,37 H STC 0,350 8,89 40,50 60,27 18,37 STC,BTC 10 3/4 273,1 0,400 10,16 45,50 67,71 20,64 STC,BTC 0,450 11,43 51,00 75,89 23,13 STC,BTC 0,495 12,57 55,50 82,59 25,17 N STC,BTC 0,333 8,46 42,00 62,50 19,05 H STC 11 3/4 298,5 0,375 0,435 9,52 11,05 47,00 54,00 69,94 80,36 21,32 24,50 STC,BTC STC,BTC 0,489 12,45 60,00 89,29 27,22 STC,BTS 0,330 8,38 48,00 71,43 21,77 H STC 0, 9,65 54,50 81,10 24,72 STC,BTC 13 3/8 339,7 0,430 10,92 61,00 90,78 27,67 STC,BTC 0,480 12,19 68,00 101,19 30,84 STC,BTC 0,514 13,06 72,00 107,14 32,66 N STC,BTC ,4 0,438 11,13 75,00 111,7 J/K55 STC, BTC, LTC 0,495 12,57 84,00 125,1 STC, BTC, LTC 0,438 11,13 94, J/K55 STC, BTC, LTC ,0 0,500 12,70 106,50 158,6 J/K55 STC, BTC, LTC 0,635 16,13 133,00 198,1 J/K55 STC, BTC, LTC
6 weight of threaded pipe with coupling Grade End finish in mm inch mm lb/ft kg/m kg/ft ,3 0,145 0,200 3,68 5,08 2,75 3,65 4,09 5,43 1,25 1,66 J, (K), N J, (K), N 2 3/8 60,3 0,167 0,190 4,24 4,83 4,00 4,60 5,95 6,85 1,81 2,09 J, (K), N J, (K), N 2 7/8 73 0,217 0,217 5,51 5,51 6,40 6,50 9,52 9,67 2,90 2,95 J, (K), N J, (K), N EUE 0,216 5,49 7,70 11,46 3,49 J, (K), N, L, C 0,254 6,45 9,20 13,69 4,17 J, (K), N, L, C, P 3 1/2 88,9 0,254 6,45 9,30 13,84 4,22 J, (K), N, L, C, P EUE 0,289 7,34 10,20 15,18 4,63 J, (K), N, L, C 0,375 9,53 12,70 18,90 5,76 (K), N, L, C, P 0,375 9,53 12,95 19,27 5,87 (K), N, L, C, P EUE 0,226 5,74 9,50 14,14 4,31 J, (K), N, L, C 4 101,6 0,262 0,330 6,65 8,38 11,00 13,20 16,37 19,64 4,99 6,00 J, (K), N, L, C J, (K), N, L, C EUE 0,415 10,54 16,10 23,96 7,31 J, (K), N, L, C 4 1/2 114,3 0,271 0,271 6,88 6,88 12,60 12,75 18,75 18,97 5,72 5,80 J, (K), N, L, C J, (K), N, L, C EUE weight of pipe Grade End finish in mm inch mm lb/ft kg/m 2 7/8 73 0,362 9,19 10,40 15,49 E, X, G EUE 3 1/2 88,9 0,368 0,449 9,35 11,40 13,30 15,50 19,81 23,09 E, X, G E, X, G EUE EUE / IUE 5 127,0 0,362 9,19 19,50 29,05 E, X, G EUE / IUE
7 Quality grade Yield strength min. max. Mpa E 75 G Tensile strength min. Mpa Size Thread connection weight lb/ff kg/m D (mm) inch mm Upset ends 3 1/2 NC 38 (3 1/2IF) EU EU
8 Yield strength min. Tensile strength min. Elongation min. CVN impact energy min. Mpa psi Mpa psi % j ft-ibs Tool Joint Drill pipe Thread connection dia D inch mm dia D inch mm Size and type weight Ib/ ff Quality grade NC 31 (2 7/ 8IF) 4 1/ / 8 EU X95 G105 NC 38 (3 1/ 2IF) / / 2 EU G105 NC / 4 6 5/ IEU G105
9 DIN 17172/ DIN 2470 StE210.7 upto StE360.7 Standards Steel Grades Size Range ASTM A 179/ A179 M ASTM A 192/ A192 M acc. to mentioned standards 16-60,3 mm / 3/8-2 Standards DIN 2391 and EN Steel Grades St 35, St 45, St 52 Size Range mm Standards ASTM A-333 Steel Grades Gr.6 Size Range 1/2-24 Standards Steel Grades Size Range DIN 2448 and DIN 2448 and Gr. St 35.8/I St 35.8/III, 15 Mo3, 13CrMo44, 16CrMo910 21,3-610,0 mm 60,3-355,6 mm ( heavy wall)
10 Mini test pressure Grade A Grade B bar bar STD STD Test pressure Grade A Grade B Inches mm Inches mm Inches bar bar
11 3 3 1/ /2 3
12 Inches mm Inches mm Inches kg/m Ib/ft mm Inches
13 ,1 10 3/4 7,8 0,307 51,03 273,1 10 3/4 8,7 0,344 56,72 273,1 10 3/4 9,3 0,365 STD 60,50 273,1 10 3/4 11,1 0,438 71,72 273,1 10 3/4 14,3 0,562 91,26 273,1 10 3/4 15,9 0, , ,1 10 3/4 18,3 0, ,99 273,1 10 3/4 20,6 0, ,27 273,1 10 3/4 22,2 0, ,36 273,1 10 3/4 23,8 0, ,30 273,1 10 3/4 25,4 1,000 XXS 155,15 273,1 10 3/4 31,8 1, ,75 323,9 * 12 3/4 4,4 0,172 34,67 323,9 * 12 3/4 4,8 0,188 37,77 323,9 * 12 3/4 5,2 0,203 40,87 323,9 * 12 3/4 5,6 0,219 43,96 323,9 12 3/4 6,4 0,250 50,11 323,9 12 3/4 7,1 0,281 55,47 323,9 12 3/4 7,9 0,312 61,56 323,9 12 3/4 8,4 0,330 65,35 323,9 12 3/4 8,7 0,344 67, ,9 12 3/4 9,5 0,375 STD 73,65 323,9 12 3/4 10,3 0,406 79,65 323,9 12 3/4 11,1 0,438 85,62 323,9 12 3/4 12,7 0,500 XS 97,46 323,9 12 3/4 14,3 0, ,18 323,9 12 3/4 15,9 0, ,76 323,9 12 3/4 17,5 0, ,23 323,9 12 3/4 19,1 0, ,56
14 457,0 18 7,9 0,312 87,49 457,0 18 8,7 0,344 96,18 457,0 18 9,5 0,375 STD 104,84 457, ,3 0, ,46 457, ,1 0, ,05 457, ,9 0, ,62 457, ,7 0,500 XS 139,15 457, ,3 0, ,11 457, ,9 0, ,95 457, ,5 0, , , ,1 0, ,25 457, ,6 0, ,69 457, ,2 0, ,03 457, ,8 0, ,25 457, ,4 1, ,34 457, ,0 1, ,30 457, ,6 1, ,14 457, ,2 1, ,58 457, ,8 1, ,44 508,0 * 20 5,6 0,219 69,38 508,0 *20 6,4 0,250 79,16 508,0 *20 7,1 0,281 87,70 508,0 20 7,9 0,312 97,43 508,0 20 7,7 0, ,12 508,0 20 9,5 0,375 STD 116, , ,3 0, ,41 508, ,1 0, ,01 508, ,9 0, ,58 508, ,7 0,500 XS 155,12 508, ,3 0, ,
15
16
17
18
19
20
21 Inches mm Inches mm Inches kg/m Ib/ft mm Inches Inches mm Inches mm Inches kg/m Ib/ft mm Inches 1930, ,7 0, ,46 403, ,6 75, , ,3 0, ,55 452, ,4 74, , ,9 0, ,51 503, ,2 74, , ,5 0, ,34 553, ,0 74, , ,1 0, ,05 602, ,8 74, , ,6 0, ,97 652, ,8 74, , ,2 0, ,43 702, ,6 74, , ,8 0, ,76 751, ,4 74, , ,4 1, ,97 801, ,2 74, , ,0 1, ,06 849, ,0 73, , ,6 1, ,02 899, ,8 73, , ,2 1, ,84 949, ,6 73, , ,8 1, ,55 997, ,4 73, , ,3 0, ,52 476, ,4 78, , ,9 0, ,50 529, ,2 78, , ,5 0, ,36 582, ,0 78, , ,1 0, ,09 634, ,8 78, , ,6 0, ,78 686, ,8 78, , ,2 0, ,27 739, ,6 78, , ,8 0, ,63 792, ,4 78, , ,4 1, ,86 843, ,2 78, , ,0 1, ,97 895, ,0 77, , ,6 1, ,95 947, ,8 77, , ,2 1, ,80 999, ,6 77, , ,8 1, , , ,4 77, , ,2 1, ,44 796, ,6 61, , ,8 1, ,15 837, ,4 61, , ,9 0, ,30 338, ,2 67, , ,7 0, ,89 360, ,6 67, , ,3 0, ,96 404, ,4 66, , ,9 0, ,91 449, ,2 66, , ,5 0, ,73 494, ,0 66, , ,1 0, ,43 538, ,8 66, , ,6 0, ,84 582, ,8 66, , ,2 0, ,30 627, ,6 66, , ,8 0, ,62 671, ,4 66, , ,4 1, ,82 715, ,2 66, , ,0 1, ,89 759, ,0 65, , ,6 1, ,84 803, ,8 65, , ,2 1, ,66 847, ,6 65, , ,8 1, ,36 891, ,4 65, , ,7 0, ,83 381, ,6 71, , ,3 0, ,93 428, ,4 70, , ,9 0, ,91 476, ,2 70, , ,5 0, ,75 523, ,0 70, , ,1 0, ,47 570, ,8 70, , ,6 0, ,66 617, ,8 70, , ,2 0, ,14 664, ,6 70, , ,8 0, ,49 711, ,4 70, , ,4 1, ,69 758, ,2 70, , ,0 1, ,81 804, ,0 69, , ,6 1, ,78 851, ,8 69, , ,2 1, ,62 898, ,6 69, , ,8 1, ,34 944, ,4 69,500
22 Type Power Voltage Current Cable section 3 or 4x... Motor lenght Max.axial load k W V A mm 2 mm kg kn TYPE 14 TYPE 8 TYPE 6 SM6-7.7 SM6-9 SM6-11 SM6-13 SM6-15 SM6-18 SM6-22 SM6-26 SM6-30 SM6-33 SM6-37 SM6-40 SM SM8-22 SM8-26 SM8-30 SM8-33 SM8-37 SM8-40 SM8-45 SM8-50 SM8-55 SM8-63 SM8-68 SM8-75 SM8-80 SM8-85 SM8-90 SM SM SM SM SM SM x x x x x 10 2 x 10 2 x 16 2 x (38) 16 (38) 16 (38) 16 (38) (38) 16 (38) (45) 38 (45) 38 (45) 38 (45)
23
24
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
Specification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
ADDA FERreport JANUARY 2015
ADDA FERreport JANUARY 2015 REPORT 2015 PREVIEW COMPLETE TUBE MILL TM8 FOR VIETNAM FABTECH & METAL EXPO 2014 JANUARY 2015 2015 PREVIEW The year 2014 has closed in a positive way for Adda Fer Meccanica,
Seamless Tubular Products. voestalpine ONE STEP AHEAD. voestalpine Tubulars. www.vatubulars.com
Seamless Tubular Products voestalpine Tubulars www.vatubulars.com voestalpine ONE STEP AHEAD. Customer advantages 2 Norsk Hydro, by Kare Foss It is our mission to furnish our customers with superior seamless
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
Caps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger
JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for exchanging heat
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
Vrtné trubky Drill Pipe
Vrtné trubky Drill Pipe VRTNÉ ROURY - zušlechtěné závity - vysoká kvalita těla roury - svařeno třením - vysoká přímost vrtných tyčí - závity dle STN, API, DIN a GOST - délky dle přání zákazníka Průměr
A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
SPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
TZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
SECTION 2.2 PAGE 1 / 9 l DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic tension and shear loads
High tensile strength stainless fasteners
High tensile strength stainless fasteners BUFAB STAINLESS HISTORY 1674 Svartå Bruk was founded 1912 Svartå Bruk was incorporated into the Hasselfors group. 1947 Production of Stainless Steel Fasteners
Seamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
Tubular solutions for the Solar Power Industry Rise in success with precision
Tubular solutions for the Solar Power Industry Rise in success with precision A comprehensive offer Precision tubes designed for CSP industry applications Solar collectors q Tubes adapted for solar heat
DIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
Seamless Tubes and Pipes for Power Plants
Seamless Tubes and Pipes for Power Plants Seamless tubes and pipes for Power Plants Features The boiler tubes and pipes are manufactured with materials able to withstand high temperatures and high pressures.
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
S355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
Mechanical Products. Mechanical Products M06-1
Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
American Petroleum Institute Purchasing Guidelines Purchase API Spec 5CT online at www.api.org/publications
API Specification 5CT ISO 11960:2011 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells 9th Edition, June 2011 Table of Contents 1.0 Product 1.1 Products 1.2 Casing
MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS GALVANISED FINISH STANDARD LENGTHS AUSTRALIAN STANDARDS THICKNESS AND MARKING
STEEL PIPE MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS Grade C250 Pipe, for general mechanical and low pressure reticulation applications, is manufactured by cold-forming and high frequency Electric
Mobrey Hydrastep and Hydratect
Product Data Sheet August 2015 BP2468, Rev EA Mobrey Hydrastep and Hydratect Water/Steam Monitoring Systems High clarity electronic gauging system for steam drums with options of local and remote indication
How To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
Stainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
Hilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor
Hilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor Supplement to Hilti North American Product Technical Guide Volume 2: Anchor Fastening Technical Guide 2011 Edition 3.3. KWIK
Metric System & Specifications
Metric System & Specifications Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial
Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
LEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code
LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900
Cold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
Product catalogue. Seamless steel pipes and tubes
Product catalogue Seamless steel pipes and tubes Product catalogue A wide range of products is our asset The rolling mills of Huta Batory and Rurexpol use the same pilger process and have a very similar
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
Quality control: Annex-A.
Quality control: Quality of the constructed work has been checked by our staff as per frequency and provision mentioned section 900 in MoRT&H and as per provision mentioned in Concession Agreement. The
Bent cold drawn seamless tubes for energy applications. U-tubes, S-tubes and free form-tubes
Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes SMP International Salzgitter Mannesmann Précision Etirage plant, Vitry Le François, France Salzgitter Mannesmann
SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET*
QUALITY SYSTEM SUBMITTAL Hubless Pipe & Fittings R E G I S T R AT I O N Manufacturer s T J B 10 FEET HUBLESS PIPE 10 FEET* NOM. SIZE B INSIDE DIAMETER J OUTSIDE DIAMETER 1 1/2 1.50 1.90 0.16 0.13 28.4
JIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
The Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
How To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
MATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
Bolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1
381 Mechanical Property Changes in Steel during the Pipe Making Process Brent Keil 1 Abstract Welded Steel Pipe (WSP) is arguably the most widely utilized pipe material for the transmission of water throughout
KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
HYDRUS ULTRASONIC METER
HYDRUS APPLICATION HYDRUS is a static water meter based on the ultrasonic technology. This technology enables accurate calculation of water consumption and eliminates measuring deviations caused by sand,
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
Separation of power and information technology cabling
Technical bulletin Separation of power and information technology cabling Date: 08/2006 This technical bulletin provides you with information on specific technical subjects. It is based on the current
20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER
REVISION: R0 DATE: 04/04/00 20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER PROPOSED BY: PREPARED FOR: TRENCOR TANK CONTAINERS - 1 - OPERATOR/ OWNER: 1. Technical Characteristics
MATERIALS AND MECHANICS OF BENDING
HAPTER Reinforced oncrete Design Fifth Edition MATERIALS AND MEHANIS OF BENDING A. J. lark School of Engineering Department of ivil and Environmental Engineering Part I oncrete Design and Analysis b FALL
Solid Mechanics. Stress. What you ll learn: Motivation
Solid Mechanics Stress What you ll learn: What is stress? Why stress is important? What are normal and shear stresses? What is strain? Hooke s law (relationship between stress and strain) Stress strain
CONTENTS. Page KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS
CONTENTS KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS STADIUM SEATING / ETHEKWINI & TELKOM SPEC PRODUCTS PRECAST PANELS DURBAN BEACHFRONT
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing Features 1/4 to 6 to 12 tubing sizes available in 316/316L stainless steel copper Seamless welded tubing available in stainless
Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
2005 WJTA American Waterjet Conference August 21-23, 2005 Houston, Texas Paper SAFE WATERJET CLEANING OF STEEL PROCESS LINES
25 WJTA American Waterjet Conference August 21-23, 25 Houston, Texas Paper SAFE WATERJET CLEANING OF STEEL PROCESS LINES D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
servo-controlled 3-WaY vacuum solenoid valves WiTH
servo-controlled 3-WaY vacuum solenoid s WiTH low absorption electric coil The 3-way vacuum solenoid s in this series feature two positions with pneumatically pilot-operated conical shutters. They can
Variable Area Flowmeters
www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales
Submittal Information
Wedge SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchs feature a stainless steel expansion clip, threaded stud body, nut and washer. Anch bodies are made of plated carbon steel, hot-dipped galvanized
Operating Instuctions. Shaking device SV 14 / 22 SV 29 / 45. page 1
Operating Instuctions Shaking device SV 14 / 22 SV 29 / 45 page 1 General notes, safety notes, notes on electrical equipment and electromagnetic compatibility, as well as notes on maintenance of the unit
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Series 4000 Fiberglass Pipe and Fittings
Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing
UGVCL/SP/591/11KV HT AB CABLE
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched
North American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
Impact Testing Systems
The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction
Scraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Technical Report Example (1) Chartered (CEng) Membership
Technical Report Example (1) Chartered (CEng) Membership A TECHNICAL REPORT IN SUPPORT OF APPLICATION FOR CHARTERED MEMBERSHIP OF IGEM DESIGN OF 600 (103 BAR) 820MM SELF SEALING REPAIR CLAMP AND VERIFICATION
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Section 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
HEAVY FORMING AND CONSTRUCTION. Products of skill and workmanship EEW PICKHAN
HEAVY FORMING AND CONSTRUCTION Products of skill and workmanship EEW PICKHAN EEW Group possesses the following approvals: ISO 9001 API 5L API 5LC API 5LD API 2B ASME U STAMP ASME U2 STAMP ASME S STAMP
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
Enclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
CATALOGUE OF HOOKLOADERS & SKIPLOADERS
& SKIPLOADERS version 7.11/2011 only DIN standards CTS-servis, a. s. Okřínek 53 290 01 Poděbrady CZ tel. : 00420 325 608111 fax : 00420 325 653097 E-mail : info@cts-servis.cz version 7.1/2011 1 http :
GENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
CHROMIUM STEEL POWDERS FOR COMPONENTS. JEANETTE LEWENHAGEN Höganäs AB, Sweden
CHROMIUM STEEL POWDERS FOR COMPONENTS JEANETTE LEWENHAGEN Höganäs AB, Sweden KEYWORDS Pre-alloyed steel powder, chromium, PM ABSTRACT Chromium as an alloying element is of great interest due to its low
TECHNICAL DATA SHEET GRILON BG-15 S
TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy
ALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
DRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature