Ball Bearing Units Stainless Series
|
|
|
- Violet Bradford
- 7 years ago
- Views:
Transcription
1 all earing Units tainless eries
2 Pillow type ball bearing unit ; F-UCPM series haft 3 / 6 7 / / 6 3 / 6 / 3 / 6 / 4 / 4 / 6 3 / 7 / / 6 / 6 3 / 6 7 / / 6 Unit F-UCPM4D/P99 F-UCPM4-D/P99 F-UCPMD/P99 F-UCPM-3D/P99 F-UCPM-4D/P99 F-UCPM-D/P99 F-UCPM-D/P99 F-UCPM6D/P99 F-UCPM6-D/P99 F-UCPM6-D/P99 F-UCPM6-3D/P99 F-UCPM6-4D/P99 F-UCPM7D/P99 F-UCPM7-4D/P99 F-UCPM7-D/P99 F-UCPM7-6D/P99 F-UCPM7-7D/P99 F-UCPMD/P99 F-UCPM-D/P99 F-UCPM-D/P99 F-UCPM9D/P99 F-UCPM9-D/P99 F-UCPM9-D/P99 F-UCPM9-D/P99 F-UCPMD/P99 F-UCPM-3D/P99 F-UCPM-4D/P99 F-UCPM-D/P99 F-UCPM-D/P / / 6 / / 7 37 / / 3 3 / 3 4 / 7. / / 3 3 / 6 3 / / / 3 7 / / 4 7 / / / / / / / 6 / 3 / 3 / 3 7 / 3 7 / 3 7 / 3 7 / / / 6 / 3 / 3 / 3 / 3 7 / 7 / 6 / / / / / / / / / 4 / 6 3 / 6 9 / / / 3 / olt size earing M 3 / M 3 / M6 F-UC4/P99 F-UC4-/P99 F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P99 F-UC6/P99 F-UC6-/P99 F-UC6-/P99 F-UC6-3/P99 F-UC6-4/P99 F-UC7/P99 F-UC7-4/P99 F-UC7-/P99 F-UC7-6/P99 F-UC7-7/P99 F-UC/P99 F-UC-/P99 F-UC-/P99 F-UC9/P99 F-UC9-/P99 F-UC9-/P99 F-UC9-/P99 F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P99 ousing PM4 PM4 PM PM PM6 PM6 PM7 PM7 PM PM PM9 PM9 PM PM of unit ousing tolerances (I 9). Tolerances for spherical bore of housing. ousing (PM, FM) Unit: m/. Tolerance class 7 igh Da Deviation Dam ow jda. Center height tolerances for pillow type bearing unit. Unit: / ousing part eviation s 4 +4 / + 6 / 4 PM4~PM ±. / ±.6 ~ + / + 7 / 9, + / / Dam; Mean spherical bore iameter eviations.
3 Rhombus flange type ball bearing unit ; F-UCFM series haft Unit / olt size earing ousing of unit F-UCFM4D/P99 F-UCFM4-D/P / / 64 / 3 3 / 3. / / 33.3 / M 3 / F-UC4/P99 F-UC4-/P99 FM4 FM4.. 3 / 6 7 / / 6 F-UCFMD/P99 F-UCFM-3D/P99 F-UCFM-4D/P99 F-UCFM-D/P99 F-UCFM-D/P / / 3 6. / / 6. 3 / F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P99 FM FM / 6 / 3 / 6 / 4 F-UCFM6D/P99 F-UCFM6-D/P99 F-UCFM6-D/P99 F-UCFM6-3D/P99 F-UCFM6-4D/P99 3 / / 64 / 64 3 / / / / F-UC6/P99 F-UC6-/P99 F-UC6-/P99 F-UC6-3/P99 F-UC6-4/P99 FM6 FM6.9. / 4 / 6 3 / 7 / 6 F-UCFM7D/P99 F-UCFM7-4D/P99 F-UCFM7-D/P99 F-UCFM7-6D/P99 F-UCFM7-7D/P / 3 3 / / 3 3 / / F-UC7/P99 F-UC7-4/P99 F-UC7-/P99 F-UC7-6/P99 F-UC7-7/P99 FM7 FM / 6 F-UCFMD/P99 F-UCFM-D/P99 F-UCFM-D/P / / 64 3 / 64 / 3 3 / 6 3 / 6. / F-UC/P99 F-UC-/P99 F-UC-/P99 FM FM.6 3. / 6 F-UCFM9D/P99 F-UCFM9-D/P99 F-UCFM9-D/P99 F-UCFM9-D/P / / 64 / / 3 4 / 4. / M6 F-UC9/P99 F-UC9-/P99 F-UC9-/P99 F-UC9-/P99 FM9 FM / 6 7 / / 6 F-UCFMD/P99 F-UCFM-3D/P99 F-UCFM-4D/P99 F-UCFM-D/P99 F-UCFM-D/P / / 6 / / / / M6 F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P99 FM FM. 4.9 ousing tolerances (I 9) 3. Tolerances for rhombus flange type housing. C Recoene tightening torque for set screw jx M ousing FM4~FM ±. / ±. eviation Unit: / Tolerances for mounting bolt holes X.7 /. is istance between the center line of spherical bore iameter of the housing. is the bolt hole's center line imension. Tighten the two set screws uniformly using the torque liste in this table. Over tightening the set screw may cause the inner ring to crack. earing (F-UC) 4, 6 7 ~ Designnation of set screws (W shape screw hea) M. o. -3UF M6.7 /4-UF M6.7 /4-UF M /6-4UF Unit: m/lbf Tightening torques (Max)
4 tainless insert bearing C G s r jd 4 haft earing D C / rs min G s 4 asic loa rating / lbf ynamic static Cr Cor 3 / 6 7 / / 6 3 / 6 / 3 / 6 / 4 / 4 / 6 3 / 7 / / 6 / 6 3 / 6 7 / / 6 F-UC4/P99 F-UC4-/P99 F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P99 F-UC6/P99 F-UC6-/P99 F-UC6-/P99 F-UC6-3/P99 F-UC6-4/P99 F-UC7/P99 F-UC7-4/P99 F-UC7-/P99 F-UC7-6/P99 F-UC7-7/P99 F-UC/P99 F-UC-/P99 F-UC-/P99 F-UC9/P99 F-UC9-/P99 F-UC9-/P99 F-UC9-/P99 F-UC/P99 F-UC-3/P99 F-UC-4/P99 F-UC-/P99 F-UC-/P o.-3uf M. o.-3uf M. M6.7 /4-UF M6.7 /4-UF M /6-4UF M /6-4UF M 3 /6-4UF ote) Insert bearings can be supplle with UD qualifie foo grae grease. The resulting grease suffix is "96". Ex. F-UC4/ Grease name CTEX FM Grease EP llowable temp. range. ~+ C eat-resistant bearing can be use up to C pplications Foo processing an general machines. ote - stanar grease qualifie by UD. Unit ball bearing tolerances (I ). Inner ring tolerances. ominal bore iameter over incl ore iameter mp Deviations Unit: m/. With Raial Vp s runout Variations Deviations (ref.) (ref.) high low max. high low max mp; Mean bore iameter eviation. Vp; ore iameter variation. s; Inner ring with eviation.. Outer ring tolerances. ominal outsie iameter D over incl Unit: Dm Deviations m/. Raial runout (ref.) high low max Dm; Mean outsie iameter eviation. The low eviation of outsie iameter Dm ose not apply within the istance of /4 the with of the outer ring from the sie.
5 all earing Units tainless eries This new series from K provies corrosion resistance an longer lubrication life in a clean unit with low torque characteristics.. Features Guars against corrosion onger lubrication life Maintains a clean operating environment ow torque characteristics K all earing Units in the stainless series feature ball bearings inserte into housings mae of stainless that provie superior resistance to corrosion as compare to stanar series cast iron units. This series is especially useful in a wie variety of applications because of the rust free properties of the housing. Mole-Oil earings are lubricate with K's own oil-impregnate material, Mole Oil. Mole Oil consists of lubricating oil an polyolefin resin that has an affinity for oil. Oil slowly seeping from this material provies ample lubrication to the bearing for extene perios. s oil seeping from the Mole Oil insie the bearing provies sufficient lubrication, troublesome oil refilling is not require an contamination of the surrouning environment is prevente. Prior to filling the bearings with Mole Oil, their interior surfaces are specially treate. s a result, bearing torque is not much higher than that of grease-lubricate bearings. (Patent pening) Interchangeability The basic imensions are the same as current K units an are also compatible with units from other manufacturers IO stanar.. Materials earing Parts Raceways Rolling element linger, Retainer Rubber seal et screw (W shape screw hea) earing housing Materials Martensite stainless steel (equivalent to U44C) Martensite stainless steel (U44C) ustenite stainless steel (U34) itryl rubber Martensite stainless steel (U4) ustenite stainless steel casting (C3) 3. Recoene operating temperature an allowable spee Mole-Oil earings are recoene to operate uner to + C. owever, operating temperature shoul be below +6 C when the bearing is operate uner continuous use. n value : 4 max (n=bore iameter in spee in min ) Remarks: This recoene operating temperature range an allowable spee is applie to all bearings with Mole-Oil earings. Contact K when your application excees these recoenations. 4. nti-corrosion Materials Martensite stainless steel I.U44C, I.U4 ustenite stainless steel I.U34, I.C3 igh carbon steel I.U Carbon steel, Cast iron. pplications F a b K recoens ratings of F to a for optimum corrosion resistance. excellent poor Conition tmosphere Dry Wet a b F F b b F Water atural water oium water itric aci ulfuric aci yrochloric aci Remarks: This ata is obtaine by observation of the surface conitions of materials. ote that these anti-corrosion capabilities are altere by anti-corrosion surface treatment. ot recoene for use in liqui. a F ci a b Mole-Oil earings are suitable in applications requiring a clean operating environment such as : foo processing an packaging machinery, chemical processing machines, etc. 6. Option The stainless series can also be fille with special grease, i. e., foo processing grae, high temperature grease, etc. lso, a grease nipple can be applie upon request. Contact K for aitional information.
iglidur PRT Slewing Ring Bearing
igliur igliur Slewing Ring Bearing Stanar range Completely maintenance-free Easy installation, intercangeable sliing pas ig wear resistance For ig loa capacity, ig stiffness Available as stainless steel
Radial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial
Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial
7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary
7. Bearing Fits 7. Fitting For rolling s, inner and outer rings are fixed on the or in the housing so that relative movement does not occur between fitting surfaces during operation or under. This relative
Self-aligning ball bearings
Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate
Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead
Screws with Plastic Nuts SUS3SUS33 MRH MRH eatures he Shaft is manufacture from SUS3 or SUS33, which gives excellent corrosion resistance. Wie range of combination of Shaft ia. an are available. MRH incorporates
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS 3 TIMKEN BALL BEARING HOUSED UNITS DESIGNED FOR OPTIMIZED PERFORMANCE For more than 110 years, Timken innovations continue to keep the world in motion, including
DODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Stainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
Service Tool Instructions
Service Tool Instructions REV. --00 Instruction Sheet ID: -J0 HD--C MAIN DRIVE GEAR/BEARING REMOVER AND INSTALLER SET General This instruction sheet describes the use of the HD--C Main Drive Gear/Bearing
High precision ball bearings
GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
Split plummer block housings SNV. For shaft diameters 20 mm to 160 mm and ¾ inches to 5½ inches
Split plummer block housings SNV For shaft iameters 20 mm to 160 mm an ¾ inches to 5½ inches Contents Features 2 Avantages 2 Dimensions 3 Material 3 Bearing seat an fitting of bearings 3 Seals an covers
Explosion proof enclosures
1 of 7 Explosion proof enclosures DE8 C 2 of 7 The Ex d enclosures are rugged and designed for harsh environment like: Oil and gas industry Chemical industry Pharmaceutical industry Agribusiness Without
Metric roller bearing units SYNT and FYNT series (SKF ConCentra)
Metric roller bearing units SYNT and FYNT series (SKF ConCentra) Bearing types Spherical roller bearings Bearing dimension series 222 Shaft diameter range 35 to 100 mm SKF ConCentra roller bearing units
Air Chain Hoists 10 & 25 Ton TCR Large Capacity Model Specifications
ir hain oists 10 & 5 Ton TR arge apacity oel Specifications ap. (Tons) oel Stanar ift (ft) TR Penant oel Specifications Push utton ose (ft) Up / own Spees (ft / min @ 90 psi) Up / own ir onsumption Rates
Performance Cylindrical OD Bearings (ER) Felt Seal & Flinger. Grade 10 Steel Balls. Lubrication Groove. Zone Hardened. Black Oxided.
Mtd. Ball Performance Cylindrical OD (ER) Sealmaster ER Style Ball Sealmaster Gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by
Rolling Bearing for Environments of Ultrahigh Temperatures
[ New Product ] Rolling Bearing for Environments of Ultrahigh s Miki ARIHANA* Takayuki KAWAMURA** In recent years the demand of bearings which are used at 4 degree C for tenter clips, glassmaking facility
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
Gunite Disc Brake Rotors
Gunite Disc Brake Rotors Maintenance Manual Gunite is the industry leader in the development of brake system components for heavy-duty truck applications including air disc brake rotors. Gunite was the
your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN
ES -Compact Backlash-free Torque Limiting Clutches K.490.V4.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one
Models RSR-M, RSR-N and RSR-TN
odels RSR-, RSR- and RSR-T 1.6 troug 2-l 1 2 1 odel RSR3 2-l 1.6 troug 2 1 1 odel RSR3 Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 3 RSR 3 RSR 5 RSR 5 RSR 5T odel
3097 en - 2013.06 / e. This manual is to be given to the end user POULIBLOC 2000-3000. Shaft mount reducer. Installation
097 en - 0.06 / e 8 en This manual is to be given to the end user POULIBLOC 000-000 Installation LEOY-SOME ISTALLATIO POULIBLOC 000-000 097 en - 0.06 / e This document complements the general instructions
High Precision Bearings for Combined Loads
High Precision Bearings for Combined Loads Axial/radial bearings Axial angular contact ball bearings Axial/radial bearings with angular measuring system added competence for your success With their forward-looking
BS-2060.390. Small Dewatering Pump - Stainless Steel Capacity up to 260 GPM, Heads up to 85 ft. Specifications
Specifications S-6.39 Small ewatering Pump - Stainless Steel apacity up to 26 PM, eads up to 85 ft. pplications: S-6 is ideal for pumping water containing corrosive materials in concentration 3-14 p. J
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
R310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
Section 6 Brake Drum Failure Analysis. Brake Drum Wear Conditions. What is Normal Wear? What is Deep or Excessive Wear? WARNING. Deep, Uniform Wear
Section Brake Drum 6 Failure Analysis WARNING To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service. Figure 6.1 ASBESTOS AND NON-ASBESTOS FIBERS
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
ORTHOBLOC 3000. Drive systems. Installation. This manual is to be given to the end user. 3996 en - 2013.04 / k. R max - 5 mm.
en - 01.0 / k 1 en This manual is to be given to the end user --> B7 (0 to 0 ) R max - mm R min + mm ORTHOBLOC 000 Installation LEROY-SOMER Ot 000 en - 01.0 / k NOTE LEROY-SOMER reserves the right to modify
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
Bearings for Machine Tools. Bearings for Machine Tools. Bearings for Machine Tools. Bearings for Machine Tools. MRC Bearing Services
Bearings for Machine Tools Bearings for Machine Tools Bearings for Machine Tools Bearings for Machine Tools MRC Bearing Services Table of Contents Page Section I Introduction.........................................................3
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Trouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
Mounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
For New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
LONG LIFE BEARING SERIES
LONG LIFE BEARING SERIES . Extension of Bearing Life. Mechanism of Flaking FLAKING IN CONTAMINATED LUBRICANT Mechanism Type SURFACE STARTING FLAKING SURFACE FLAKING Abrasion caused by small hard particles
SKF Food Line Y-bearing units. A maintenance-free solution for wet, abrasive and contaminating environments
SKF Food Line Y-bearing units A maintenance-free solution for wet, abrasive and contaminating environments Contents The SKF brand now stands for more than ever before, and means more to you as a valued
Special Rolling Bearings
Special Rolling Bearings Special Rolling Bearings KINEX produces, except a large number of types and sizes of standardized rolling bearings of both basic and modified designs presented in the preceding
BLS 100 Orifice Plate DIN 19206
E91 2006 1Orifice Plate, Orifice Flange, Meterrun, Restriction Orifice Application Flow rate measurement of aggressive an nonaggressive meia particularly for large pipelines. Construction Orifice plate
Roller bearing life. The Reaction of AISI 52100 Bearing Steel to Heat
Roller bearing life in high temperatures A common question maintenance personnel ask bearing companies when their equipment temperature is high or rises is, What is the maximum temperature that your rolling
Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
L4. Pipes Materials and Loads
The Islamic University of Gaza- Civil Engineering Department SanitaryEngineering- ECIV 4325 L4. Pipes Materials an Loas Base on Dr. Fahi Rabah lecture notes Pipes Materials an loas Materials use for pipes:
Johnson Power Ltd. / MAINA GEAR COUPLINGS
PGE 1 Johnson Power Ltd. / MIN GER OUPLINGS Johnson Power, Ltd. is now pleased to offer Maina gear couplings. Maina designs and manufactures a complete line of gear couplings and spindles for industrial
POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
Spicer Axles & Brakes ABIB-0302
Information Bulletin Bulletin Type: Parts / Service Information Topic: Dana LMS Hub Assembly Procedure Steer and Drive Axles Spicer Axles & Brakes ABIB-0302 Note: Bulletin ABIB-0302 replaces the original
SKF Y-bearing units. Extreme temperatures
SKF Y-bearing units Extreme temperatures Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality
3. Geberit Pluvia Roof Drainage Systems
3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets...52 3.1 Roof outlets... 53 3.1.1 Roof outlets up to 25 l/s...53 3.1.2 Roof outlets up to 100 l/s...55 3.2 Roof outlets for gutters...
SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
L I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
11 CHAPTER 11: FOOTINGS
CHAPTER ELEVEN FOOTINGS 1 11 CHAPTER 11: FOOTINGS 11.1 Introuction Footings are structural elements that transmit column or wall loas to the unerlying soil below the structure. Footings are esigne to transmit
PEDAL CAR - GO CART ASSEMBLY & OPERATING INSTRUCTIONS
PEDAL CAR - GO CART 42822 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2000 by Harbor Freight Tools. All
300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
SNL 30 and SNL 31 plummer block housings solve the housing problems. (Replace SD housing range)
SNL 30 and SNL 31 plummer block housings solve the housing problems (Replace SD housing range) Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve total quality
Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
Expertise in Agricultural Engineering
Expertise in Agricultural Engineering Expertise in Agricultural Engineering Every farmer or manufacturer of agricultural machinery knows the problems: Machines and equipment must withstand harsh conditions
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
DIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
Stainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
Hochpräzisions-Wälzlager High Precision Bearings
Tel: +49/64 41/95 53-02 Fax: +49/64 41/5 30 15 POSTFACH 1825 35528 WETZLAR (GERMANY) e-mail: ibc@ibc-waelzlager.com Industriegebiet Oberbiel D-35606 Solms-Oberbiel http://www.ibc-waelzlager.com IBC INDUSTRIAL
Hydraulic multidisc Brake H420
S320gb - rev 02/09 S E R V I C E Hydraulic multidisc Brake H420 A N U A L WARNER ELECTRIC EUROPE Rue Champfleur, B.P. 20095, F- 49182 St Barthélemy d Anjou Cedex Tél. +33 (0)2 41 21 24 24, Fax + 33 (0)2
Power Transmission. Installation and Operating Instruction for Integrated Freewheels FXM and FX Type NX, MX and LX. E 08.766e
Power Transmission Installation and Operating Instruction for Integrated Freewheels FXM and FX Type NX, MX and LX Schaberweg 30-34 61348 Bad Homburg Germany Telephone +49 6172 275-0 Telefax +49 6172 275-275
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
Technical Service Bulletin
Subject BRAKE SERVICE BEST PRACTICES RECOMMENDATIONS Date Model [X] PARTS MANAGER OCTOBER, 2010 [X] TECHNICIAN CIRCULATE TO: [ ] GENERAL MANAGER [X] SERVICE ADVISOR [X] SERVICE MANAGER [X] WARRANTY MGR
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
be carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque
SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied
Rexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
R50E.pdf 08.8.26. o Part Numbering. Trimmer Potentiometers. (Part Number) 103 r. C01 t. R00 y. Total Resistance. qproduct ID
!Note This!Note DF catalog lease is downloaded read rating and from!cution the website (for of Murata storage, Manufacturing operating, rating, co., ltd. soldering, Therefore, mounting it s specifications
Hydraulic Transmission Jacks Operating Instructions & Parts Manual
Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Hydraulic Transmission Jacks Operating Instructions & Parts Manual Model BH7011 BH7210 Capacity 1/2 Ton 1 Ton SFA Companies
Fire Pump Applications
Fire Pump Applications Installation & Maintenance Manual Universal Joint Driveshafts www.cumminsfirepower.com Table of Contents Section 1 General 1.1 Introduction 1.2 Safety Precautions 1.3 Warranty Statement
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
Rotary Joints Solutions for safe transfer of fluids
Rotary Joints Solutions for safe transfer of fluids Rotary Joints for Machine Tools Rotary Joints for Machine Tools Rotary joints are required in practically all industries to transfer fluids from stationary
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET*
QUALITY SYSTEM SUBMITTAL Hubless Pipe & Fittings R E G I S T R AT I O N Manufacturer s T J B 10 FEET HUBLESS PIPE 10 FEET* NOM. SIZE B INSIDE DIAMETER J OUTSIDE DIAMETER 1 1/2 1.50 1.90 0.16 0.13 28.4
Ceramic Trimmer Capacitors
!Note T3E8.pdf 2.9.2 Ceramic Trimmer Capacitors TZB4 Series.±. Depth.5.4±. dia. Features. Miniature rectangular shape : 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identification of capacitance
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
TRAKROL. Designed and Built for Longer Life Under Combination Radial and Thrust Loads... More Contaminated Applications.
TRAKROL SPCIAL-DUTY CAM FOLLOR BARINGS xperience The PT MRSON POR TRANSMISSION Now ith Black Oxide Coating Designed and Built for Longer Life Under Combination Radial and Thrust Loads... More Contaminated
Drawn Cup Needle Roller Bearings
Drawn up Needle Roller Bearings NSK has introduced the most advanced bearing technology, offering unprecedented precision and reliability. Available in two types caged and full complement. High-quality
HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES. Page 1 Version no.: V0-090902
Page 1 HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES Page 2 Heavy-Duty Hand Cutting Torch HCT 663: With lever-operated valve for cutting oxygen, for cutting duties involving high thermal loads on slabs,
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
Control Stations Made of Polyester Resin Series 8146
ontrol Stations Made of Polyester Resin www.stahl.de > s made of glass-fibre reinforced polyester resin > 8 basic enclosure sizes with various enclosure heights > an be combined to larger units > Equipped
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber
So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber INA reprint November 2000 So You Want to Think Lean? New High-Precision Bearing Unit for Cost-Effective Ball Screw Supports in the Small