General Purpose, Pulse and DC Transient Suppression SMP253 Series Metallized Impregnated Paper, Class Y2, 250 VAC, Surface Mount Device.
|
|
|
- Prosper Glenn
- 7 years ago
- Views:
Transcription
1 General Purpose, Pulse and DC Transient Suppression SMP253 Series Metallized Impregnated Paper, Class Y2, 250 VAC, Surface Mount Device Overview The SMP253 Series is constructed of multilayer metallized paper, encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications include worldwide use as electromagnetic interference suppressor in all Y2 applications, line-to-earth. Benefits Approvals: S, UL, CSA Rated voltage: 250 VAC 50/60 Hz Capacitance range: µf Size code: 5045, 12.7 mm Capacitance tolerance: ±20% Climatic category: 40/100/56/B, IEC Tape and reel packaging in accordance with IEC RoHS Compliant and lead-free terminations Operating temperature range of -40 C to +100 C 100% screening factory test at 3,000 VDC Highest possible safety regarding active and passive flammability Excellent self-healing properties ensure long life even when subjected to frequent over voltages Good resistance to ionization due to impregnated dielectric High dv/dt capability Impregnated paper ensures excellent stability and reliability properties, particularly in applications with continuous operation Legacy Part Number System SMP253 M A 4100 M TR24 Series Rated Voltage (VAC) Chip Length (mm) Capacitance Code (pf) Y2, Metallized Paper M = 250 A = 12.7 Digits 2 4(3) indicates the first three digits of the capacitance value. First digit indicates the total number of digits in the capacitance value. Capacitance Tolerance M = ±20% Lead and Packaging Code See Ordering Options Table New KEMET Part Number System P 101 AA 102 M 250 V Capacitor Class Series Chip Size Capacitance Code (pf) P = Paper Y2, Metallized Paper See Dimension Table First two digits indicate the two most significant digits of the capacitance value in picofarads. The third digit is the number of following zeros. Capacitance Tolerance Rated Voltage (VAC) Lead and Packaging Code M = ±20% 250 = 250 See Ordering Options Table One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 1
2 Ordering Options Table Packaging Type Standard Lead and Packaging Options KEMET Lead and Packaging Code Legacy Lead and Packaging Code Tape & Reel (Standard Reel) V TR24 Bulk (Bag) A BULK Other Lead and Packaging Options Tape & Reel (Vertical Orientation Standard Reel) Y TV24 Dimensions Millimeters L B B H F Chip Size B H L F EIA Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance / / / Nominal KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 2
3 Performance Characteristics Rated Voltage 250 VAC 50/60 Hz Capacitance Range µf Capacitance Tolerance ±20% Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals Insulation Resistance -40ºC to +100 C 40/100/56/B S, UL, CSA Maximum Values at +23 C 1 khz 1.3% The 100% screening factory test is carried out at 3,000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Minimum Value Between Terminals 12,000 MΩ Environmental Test Data Test IEC Publication Procedure Vibration IEC Test Fc 3 directions at 2 hours each Hz at 0.75 mm or 98 m/s 2 Active Flammability IEC Passive Flammability IEC Needle-flame test Humidity IEC Test Ca +40 C and 90 95% RH Approvals Mark Specification File Number EN/IEC /01 UL 1283 (250 VAC) CSA C22.2 No. 8 (250 VAC) E E KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 3
4 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 Ratings & Part Number Reference Cap Value (µf) Maximum Dimensions in mm B H L dv/dt (V/µs) New KEMET Part Number Legacy Part Number P101AA102M250(1) SMP253MA4100M(1) P101AA152M250(1) SMP253MA4150M(1) P101AA222M250(1) SMP253MA4220M(1) P101AA252M250(1) SMP253MA4250M(1) P101AA332M250(1) SMP253MA4330M(1) P101AA392M250(1) SMP253MA4390M(1) P101AA472M250(1) SMP253MA4470M(1) Cap Value (µf) B (mm) H (mm) L (mm) (1) Insert packaging code. See Ordering Options Table for available options. dv/dt (V/µs) New KEMET Part Number Legacy Part Number KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 4
5 Soldering Process Reflow soldering temperature shall be measured on the top body surface of the component. The profiles herewith are recommended soldering profiles for convection reflow ovens and IR reflow ovens. If vapor phase reflow oven is used, please consult KEMET. Exceeding the manufacturer s process recommendations may harm the component. KEMET is not liable for any defect caused by exceeding recommendations. According to international standards, the maximum temperature capability shall be measured on the top surface of a component. The international standards do not define how the thermocouple should be fastened on the component. Our recommendation for attaching the thermocouple on the top surface of the component is to glue it with high temperature resistant glue. Marking KEMET s logo Series Capacitance Rated voltage Capacitor class Manufacturing date code Packaging Quantities Chip Size EIA Thickness (mm) Height (mm) Length (mm) Standard Reel ø 330 mm Horizontal Orientation Vertical Orientation KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 5
6 Carrier Taping & Packaging (IEC ) Horizontal Taping Orientation W 2 D W 1 EIA Size Code Dimensions in mm Taping Specification Horizontal B H L W P Mounting 1 A 0 B 0 K 0 D W 1 W 2 Nominal Nominal Nominal -0/+0.3 +/-0.1 Nominal Nominal Nominal -/+2.0-0/+2 Maximum Vertical Taping Orientation W 2 D Side View W 1 EIA Size Code Dimensions in mm Taping Specification Vertical B H L W P Mounting 1 A 0 B 0 K 0 D W 1 W 2 Nominal Nominal Nominal -0/+0.3 +/-0.1 Nominal Nominal Nominal -/+2.0-0/+2 Maximum 5026 (5045) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 6
7 KEMET Corporation World Headquarters 2835 KEMET Way Simpsonville, SC Mailing Address: P.O. Box 5928 Greenville, SC Tel: Fax: Corporate Offices Fort Lauderdale, FL Tel: North America Southeast Lake Mary, FL Tel: Northeast Wilmington, MA Tel: West Chester, PA Tel: Central Novi, MI Tel: Carmel, IN Tel: West Milpitas, CA Tel: Mexico Zapopan, Jalisco Tel: Europe Southern Europe Geneva, Switzerland Tel: Paris, France Tel: Sasso Marconi, Italy Tel: Milan, Italy Tel: Rome, Italy Tel: Madrid, Spain Tel: Central Europe Landsberg, Germany Tel: Dortmund, Germany Tel: Kwidzyn, Poland Tel: Northern Europe Bishop s Stortford, United Kingdom Tel: Weymouth, United Kingdom Tel: Coatbridge, Scotland Tel: Färjestaden, Sweden Tel: Espoo, Finland Tel: Asia Northeast Asia Hong Kong Tel: Shenzhen, China Tel: Beijing, China Tel: Shanghai, China Tel: Taipei, Taiwan Tel: Southeast Asia Singapore Tel: Penang, Malaysia Tel: Bangalore, India Tel: Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 7
8 Other KEMET Resources Tools Resource Configure A Part: CapEdge SPICE & FIT Software Search Our FAQs: KnowledgeEdge Location Product Information Resource Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents Location Product Request Resource Sample Request Engineering Kit Request Location Contact Resource Website Contact Us Investor Relations Call Us Twitter Location MyKEMET Disclaimer All product specifications, statements, information and data (collectively, the Information ) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 8
9 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3018_SMP253_Y2_250 7/17/2012 9
Applications SS 26 V- R 05 1170
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
Applications SS 11 VL- R 03 550
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the
Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
AC Line EMI Suppression and RC Networks PME271M Series Impregnated Paper, Class X2, 275 VAC Overview Applications The PME271M Series is constructed of multilayer metallized paper encapsulated and impregnated
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
DDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
Type EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options
Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
QUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323
Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4
Diode, Schottky SMB/DO-214AA. Page <1> 24/04/08 V1.1. Dimensions Inches (Millimeters)
Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Plastic material. Epitaxial
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
Agilent P940xA/C Solid State PIN Diode Switches
Agilent P940xA/C Solid State PIN Diode Switches Operating and Service Manual Agilent Technologies Notices Agilent Technologies, Inc. 2007 No part of this manual may be reproduced in any form or by any
Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
Agilent 4339B/4349B High Resistance Meters
Agilent 4339B/4349B High Resistance Meters Technical Overview Within Budget Without Compromise Introducing the Agilent Technologies 4339B and 4349B High Resistance Meters Used for Making Ultra- High Resistance
LM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
L4940 series VERY LOW DROP 1.5 A REGULATORS
L4940 series VERY LOW DROP 1.5 A REGULATORS PRECISE 5 V, 8.5 V, 10 V, 12 V OUTPUTS LOW DROPOUT VOLTAGE (500 typ at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
LM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
EVL185W-LEDTV. 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L. Features.
Features 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L Data brief Universal input mains range: 90 264 Vac - frequency 45 65 Hz Output voltage 1: 130
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
MINIATURE SURFACE MOUNT RELAY
FTR-K1 SERIES MINIATURE SURFACE MOUNT RELAY 1 POLE - 25A (For Automotive Applications) FTR-P6 Series FEATURES Surface mount relays for automotive applications Miniature size (67% of the volume of FTR-P3
SUPERSEDED REVISION. Gas Discharge Tubes GTCX28-XXXM-R20 Series. Features: Benefits: Applications
GTCX28-XXXM-R20 Series Raychem Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
AN3353 Application note
Application note IEC 61000-4-2 standard testing Introduction This Application note is addressed to technical engineers and designers to explain how STMicroelectronics protection devices are tested according
C9 8 1 U 103 M Y V D A A 7317. Rated Voltage Y = X1 400 VAC / Y2 250 VAC. Capacitance Tolerance C = ±0.25 pf D = ±0.5 pf J = ±5% K = ±10% M = ±20%
Safety Standard Recognized, 900 Series, Radial Disc, Encapsulated, AC Type, X 400 VAC/Y2 250 VAC (Industrial Grade) Overview KEMET s 900 series encapsulated radial through-hole ceramic disc capacitors
HCF4001B QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V
Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
Gas Discharge Tubes GTCX26-XXXM-R05 Series
Raychem Circuit Protection 6mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
Agilent 87421A/87422A Power Supply
Agilent 87421A/87422A Power Supply Technical Overview Designed specifically for Agilent Technologies microwave system amplifiers Bias cable permits remote placement Compact size for easy system integration
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.
STTH1R04-Y. Automotive ultrafast recovery diode. Features. Description
Automotive ultrafast recovery diode Features Datasheet - production data K SMA STTH1R4AY Table 1. Device summary Symbol Value I F(AV) 1 A V RRM 4 V T j (max) 175 C V F (typ) t rr (typ) A K.9 V 14 ns A
VT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
L6234. Three phase motor driver. Features. Description
Three phase motor driver Features Supply voltage from 7 to 52 V 5 A peak current R DSon 0.3 Ω typ. value at 25 C Cross conduction protection TTL compatible driver Operating frequency up to 150 khz Thermal
2 POLES - 5A LOW PROFILE TYPE
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
How To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
Description SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
HCF4081B QUAD 2 INPUT AND GATE
QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25
MC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 mail@fischerconnectors.ch
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms
LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT
LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
Product Overview 2Pro AC Devices Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications
Product Overview Provide Overcurrent/ Overvoltage/Overtemperature Protection for AC Industrial and Appliance Applications The 2Pro AC family of devices provide integrated overcurrent/overvoltage/ overtemperature
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
65 V, 100 ma PNP/PNP general-purpose transistor
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description PNP/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.
45 V, 100 ma NPN/PNP general-purpose transistor
Rev. 4 18 February 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode
DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
Installation Guide. 85070E Dielectric Probe Kit 85071E Materials Measurement Software
Installation Guide This guide provides instructions for installing and configuring the following software products: 85070E Dielectric Probe Kit 85071E Materials Measurement Software Agilent Part Number:
ST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS
5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs
BSN20. 1. Description. 2. Features. 3. Applications. 4. Pinning information. N-channel enhancement mode field-effect transistor
Rev. 3 26 June 2 Product specification. Description in a plastic package using TrenchMOS technology. Product availability: in SOT23. 2. Features TrenchMOS technology Very fast switching Logic level compatible
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
ULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
W- Series. Features: WOB. Mechanical Data Case : Moulded plastic. Lead : Solder plated. Weight : 1.10 grams. Page <1> 15/07/08 V1.
Features: Surge overload ratings to 40 amperes peak. Ideal for printed circuit board. Reliable low cost construction. High temperature soldering guaranteed: 260 C/10 seconds/0.375inch (9.5mm) lead lengths
Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
Description. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection