Alumeco A/S is ISO 9001certified

Transcription

1 ALUMINIUM

2 Alumeco A/S is ISO 9001certified 2

3 Company Profile and Map Aluminium Sheets/Plates Aluminium Coils Aluminium Tread Plates Aluminium Barely Seed Plates Aluminium Gangway Profiles Aluminium Bars - Round Aluminium Bars - Square Aluminium Bars - Hexagonal Aluminium Profiles - Flat Aluminium Profiles - U, T, L Aluminium Tubes - Square and Rectangular Aluminium Profiles - Nature Anodized Aluminium Profiles - Bulb Aluminium Tubes - Round Aluminium - Roller Tubes Aluminium - Cylinder Tubes Aluminium - Fittings Transport Systems Aluminium - Cargo Sections Aluminium/Steel - Joint Compositions Aluminium - Strongbacking Aluminium - Special Profiles Colour Marks According to Alloy Machining Technical Information Reference Table Terms of Sale and Delivery Edition 2015

4 Company Profile Alumeco A/S, Odense Alumeco A/S Who is Alumeco A/S Alumeco is the leading aluminium whole saler in Scandinavia. We are a modern trading company working in accordance with the motto Just in time. Our prime duty is to meet the demands of our customers. Alumeco A/S was established in Since then the company has expanded and today the group has several subsidiaries abroad. Scandinavia's most extensive aluminium stock From our head office at Naesbyvej in Odense, Alumeco offers a very wide range of aluminium profiles, special profiles, bars, tubes, plates and coils. We have Scandinavia's most extensive stock with more than 5000 tons of aluminium. In addition Alumeco has its own service center, enabling us to offer sawing of plates and profiles as well as foil application. 4

5 How to find Alumeco A/S MOTEL NÆSBYLUND KRO Address Alumeco A/S Naesbyvej 26 DK-5000 Odense C. Phone: Fax: Web: GAMMELSØ NÆSBYVEJ ÅLØKKE ALLÈ ØSTRE STATIONSVEJ PLAZA HOTEL ODENSE RADISON SAS H.C. ANDERSEN HOTEL - ODENSE RUGÅRDSVEJ Odense V Havn Bloenslyst Motorway Middelfart/Odense E20 Exit 53 on the motorway Distance to Grønløkkevej is approx. 12 km MIDDELFARTVEJ GRØNLØKKEVEJ E20 5

6 Aluminium Sheets/Plates / Aluminium Coils Chemical Composition: EN AW-1050A - EN 573-3: 2009 Si Fe Cu Mn Mg Zn Ti Others Al Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength Rm N/2 min. max. 0.2% proof stress Rp 0.2 N/ 2 Elongation A50 A min. % min. Brinell hardness HBS % min. O/H111 0, H112 6, H14 0, H24 0,2-12, For more information see page 56 Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Good Not suited for anodizing Excellent 6

7 Aluminium Sheets/Plates - EN AW-1050A EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/ pcs. Stocked in deep drawn quality (DDQ). All sheets/plates can be supplied with PE-foil x 2000 Kg/pcs x 2500 Kg/pcs x 3000 H14/ H24 DDQ Stucco H14/ H24 DDQ Stucco H14/H We also stock: 1.5 x 1500 x 4000 ; 2.0 x 1500 x 4000 ; 2.0 x 2000 x 3000 Aluminim Coil: Alloy EN AW-1050A H14 EN 573-3, 485-1, 485-2, Dimension Kg/coil 0.7x kg 1.0x kg 1.0x kg 1.5x kg 2.0x kg SHEETS CUT-TO-LENGTH Alumeco cuts and delivers in dimensions you need. Your advantages: Less waste Limited stock Quick and flexible delivery CONTACT US FOR OFFER Aluminim Coil: Alloy EN AW-1050A H14 Stucco EN 573-3, 485-1, 485-2, Dimension Kg/coil 0.7x kg 0.8x kg 0.8x kg 1.0x kg Stucco Aluminium Coil for insulation EN 573-3, 485-1, 485-2, H H22 Coated RAL 9005* Coated RAL 9010* Dimension Kg/coil Kg/coil Kg/coil Kg/coil 0.63x / 1000 kg 500 kg 0.70x kg 500 kg 0.88x / 1000 kg 250 / 500 kg 0.75x / 1000 kg 250 / 500 kg 1.00x / 1000 kg 250 / 500 kg 500 kg 500 kg 7

8 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS O/H O/H H H22/ H24/ For more information see page 56 Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Excellent Good Excellent 8

9 Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/pcs x 1000 x 2000 Kg/pcs x 1250 x x 1020 x x 1270 x Kg/pcs. 1-6 x 1500 x x 1520 x 3020 H22/32 H112/H111 H22/32 - H24/34 H112/H111 H22/32 H112/H * ,0 * Price is dimension dependent. All sheets/plates up to and including 8 thickness can be supplied with PE-foil. 9

10 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties: Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS O/H H22/ H24/ GradeA For more information see page 56 Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS O/H O/H GradeA H H For more information see page 56 10

11 Aluminium Sheets/Plates - Sea water-resistant - EN AW »Super-size«EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/ pcs x * * Can be supplied with PE-film 1 side. Kg/ pcs x * Aluminium Sheets/Plates - Sea water-resistant - EN AW »Super-size«EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/pcs x Kg/pcs. All stated weights are theoretical weights, which may vary x Kg/pcs x

12 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS O/H O/H O/H O/H O/H For more information see page 56 Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Excellent Protective anodizing Excellent High tensile strength; particularly used in shipbuilding and tank industries as well as for moulds in plastic and furniture industries 12

13 Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/pcs. 2-6 x 1000 x 2000 Kg/pcs. 2-6 x 1250 x 2500 Kg/pcs. 2-6 x 1500 x x 1020 x x 1270 x x 1520 x x 1520 x * * * * * All sheets/plates up to and including 8 thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary. Can be supplied in thickness up to 750. *) Can also be supplied in dimension 2000 x Plates from 6 to 20 in thickness can be supplied with DNV-certificate. 13

14 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 Special Characteristics: 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS T T T T For more information see page 56 Corrosion resistance Suitability for anodizing Weldability Good Good Excellent High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc. 14

15 Aluminium Sheets/Plates - EN AW-6082 T6/T651 EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/pcs. 1-6 x 1000 x x 1020 x , Kg/ pcs. 2-6 x 1500 x x 1520 x * * * * * Price is dimension dependent. All sheets/plates up to and including 8 thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary. Aluminium Plates - EN AW 6082 T651 Special Flatness EN 573-3, 485-1, 485-2, Thickness Kg/pcs x 3020 Special Flatness Extra straightened plates Better planeness Max per Tension annealed Less tensions Superior surface Superior thickness tolerance Also supplied cut to length 15

16 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 Special Characteristics: 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS T T T T T For more information see page 56 Corrosion resistance Suitability for anodizing Weldability Acceptable Protective anodizing Acceptable High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc. Chemical Composition: HOKOTOL Cu Mg Zn Al Rest Mechanical Properties: Tensile stregth R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 A min. max. min. max. % min. % max. Brinell hardness HBS Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Acceptable Protective anodizing Acceptable Hardness consistency, also in the centre of the plate. Extremely high tensile strength, wear-resistant and forged. Particularly applicable in the tooling industry, for construction of moulds etc. We can also offer: Sheets/plates, rings and roundels cut to length, also in small quantities. 16

17 Aluminium Sheets/Plates - EN AW-7075 EN 573-3, 485-1, 485-2, Thickness Kg/ pcs x * * * Thickness Kg/pcs x 3020 Thickness Kg/pcs x Thickness Kg/pcs x * * * * * * * * * * * * * * * * * * * All sheets/plates can be supplied up to and including 400 thickness, but we recoend HOKOTOL thicker than 80. * Price is dimension dependent. Typical 0,2 % proof stress Hardness across a 300 (12 ) thick plate Rp0,2 (LT,s/2) [MPa] HOKOTOL T Plate thickness [] [ins.] Hardness HB 2,5/187, ,1 0,2 HOKOTOL 7075 T651 0,3 0,4 0,5 0,6 0,7 Thickness position 0,8 0,9 1 Aluminium Plates - HOKOTOL Tooling plates as alternative to tooling steel. EN Thickness Kg/pcs. 790 x 2200 Kg/pcs x 2520 Kg/pcs x All stated weights are theoretical weights, which may vary. Can be supplied up to 400 thickness. Other dimensions available on inquiry. 17

18 Aluminium Sheets/Plates Chemical Composition: EN AC-5083 cast block, sawn on 6 sides Si Fe Cu Mn Mg Cr Zn Ti Others Al Rest Mechanical Properties: Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. % min. % min. A Brinell hardness HBS ca Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Very good Good Very good 18

19 Aluminium Plates: EN AC-5083 cast block, sawn on 6 sides Naturally aged, homogenized and stress free Thickness Kg/pcs x 3100 Thickness Kg/pcs x We can supply all thicknesses from from our stock in Coswig, Germany. Characteristics Very good machining properties Easy to mill Good corrosion resistance Minimum porosity Minimum internal stress Fields of application Moulds Machine construction Auto parts Sawing of thick plates - Alumeco Deutschland GmbH. 19

20 Aluminium Sheets/Plates Chemical Composition: Cast Aluminium Plates - EN AC EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 A min. norm min. norm % min. % max. Brinell hardness HBS Special Characteristics: Excellent dimensional stability during machining High mechanical properties Minimal porosity Excellent for anodizing (hard) Fully machinable Fully weldable Roughness of Ra 0.4 microns Excellent corrosion resistance Good mechanical properties at elevated temperatures Tolerances Thickness: ± 0.1 Flatness: < /m Flatness: > /m 20

21 Cast Aluminium Plates - EN AC-5083 Surface: Precision milled on both sides, with protective foil. Thickness Kg/pcs x 3048 Kg/pcs x 3020 Kg/pcs x

22 Aluminium Sheets/Plates Chemical Composition: "Weldural" Si Fe Cu Mn Mg Cr Zn Zr Ti Al Rest Mechanical Properties: Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 A Brinell hardness HBS min. norm. min. norm. % min. % max Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Acceptable Protective anodising Very good Chemical Composition: EN AW-2017A - EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS T T T T T Special Characteristics: Corrosion resistance Suitability for anodizing Weldability Acceptable Protective anodising Acceptable 22

23 Aluminium Plates - Weldural Tooling plates as alternative to tooling steel. Thickness Kg/pcs x 3020 Thickness Kg/pcs x Aluminium Plates - EN AW-2017A EN 573-3, 485-1, 485-2, 485-3, Thickness Kg/pcs x

24 Alloy overview Wide selection of alloys The table below sums up a number of the alloys and corresponding thickness directly available from Denmark or Germany. Thickness EN AW-5754 EN AW-5083 EN AW-6082 EN AW- EN AW-7075 Weldural Hokotol EN AC-5083 EN AC A precision milled sawn DE DK DE DK DE DK DE DE DK DE DE DK DE DK DE DK Standard rolled plate dimensions Thickness Max. width Max. length /3020 Max. dimensions of cast blocks 610 x 1350 x x 1100 x x 1650 x

25 Special alloys Cast aluminium 5083 alloy Our cast aluminium is available sawn on six sides. Characteristics: Easy to mill Minimum porosity No rolling structure Internal stress is reduced to the absolute minimum to obtain extreme precision, also after machining Cast and precision milled 5083 alloy The precision-milled EN AC-5083 plates have the following additional advantages: Flatness tolerances to a minimum of 0.13 /metre 15 thick Thickness tolerances of +/ Roughness: Ra 0.64 my Foil on both sides Precision part in 5083 Mould for car headrest (made by W. Olsen) Hokotol 7000 alloy Fields of application: Moulds for blow forming and injection moulding for the plastics industry Punching tools Machine parts requiring high strength combined with low weight Moulds for casting plastic window frames Weldural 2219 alloy Fields of application: Precision parts for the machine industry due to high dimensional stability Machine parts Moulds Suitable for high temperatures Refrigeration engineering Characteristics: High strength under heat stress Medium and high strength Resistant to wear Excellent weldability Good polishing properties Good corrosion resistance Extremely uniform mechanical properties throughout the entire thickness of the plate Excellent dimensional stability by stress relieved stretching or cold compressing Good thermal conductivity Characteristics: Lightweight Easy to mill Extremely uniform mechanical properties throughout the entire thickness of the plate Resistant to wear Good polishing properties Excellent dimensional stability by stress relieved stretching or cold compressing Good thermal conductivity Blow mould tank in Weldural 25

26 Aluminium Sheets/Plates Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties - EN 485-2: 2008 Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS H H24/H Special Characteristics: For more information see page 56 Corrosion resistance Suitability for anodizing Weldability Good Vey good Good Specially suited for decorative anodizing 26

27 Aluminium Sheets EN AW-5005 H14 - normal quality EN 573-3, 485-1, 485-2, Thickness Available with and without foil. Kg/pcs x Aluminium Sheets EN AW-5005 H14 - Guaranteed Anodizing Quality 1 side covered with PE-foil. EN 573-3, 485-1, 485-2, Thickness Kg/pcs x 2000 Kg/pcs x 2500 Kg/pcs x Kg/pcs x Aluminium Sheets EN AW-5005 H14 - Nature anodized my 1 side covered with PE-foil. EN 573-3, 485-1, 485-2, Thickness Kg/pcs x 2000 Kg/pcs x 2500 Kg/pcs x ,0 5,4 8,5 12,2 1,5 8,1 12,7 18,3 2,0 10,8 17,0 24,3 3,0 16,2 25,3 36,6 Stainless Steel look aluminium sheets - SSL Aluminium sheets looking like stainless steel with laser foil on 1 side Thickness Kg/pcs x Dirt resistant, Corrosion resistant, UV-resistant, antistatic and uniform structure. Other dimensions on request. Samples can be sent on request 27

28 Aluminium Sheets - Coil Coated Aluminium Sheets Coated Polyester coated, liquid painting, 1 side covered with PE-foil. EN 573-3, 485-1, 485-4,1396, Thickness Format Kg/ pcs. White White RAL 9010 NCS 0500 finish finish Black RAL 9005 finish Silver RAL 9006 finish Antracit grey RAL 7016 finish Signal yellow Signal red Signal blue Signal green x x x x x x x x x x x x For technical reasons, the colour samples above can vary from the colour of the painted sheets. Please ask for colour samples Aluminium Coil Coated EN 573-3, 485-1, 485-4, 1396, Colour Dimension 0.6x1220 coil white stucco 0.6x1220 coil oliven stucco 0.6x1220 coil grey stucco 0.6x1220 coil red stucco Kg/coil 500 kg 500 kg 500 kg 500 kg 0.9x1250 coil NCS 0502Y with foil 1 side 500 kg 0.7x1000 coil RAL 9005 with foil 1 side 1.0x1000 coil RAL 9005 with foil 1 side 0.7x1000 coil RAL 9010 with foil 1 side 1.0x1000 coil RAL 9010 with foil 1 side 500 kg 500 kg 500 kg 500 kg 28

29 Coated sheets Overview of coating types Coated aluminium sheets are most often used in the building, sign and insulation sectors. In general there are two types of coated aluminium sheets: liquid painted and powder painted. Below is an overview of the two types and their characteristics: Definition Types Advantages Disadvantages Liquid painting Liquid paint is applied to the sheet with a roller and is then heat dried to harden the paint. Polyester Polyurethane Polyamide PVDF Excellent resistance to abrasion and knocks (Polyamide) Resistant to chemical, mechanical and corrosive effects (PVDF) Excellent elasticity (PVDF) Good chemical resistance (Polyamide) Good coating elasticity Good resistance to UV (Polyamide) PVDF has 24+ years life expectancy Bad chemical resistance (Polyrethane) Powder painting The sheet is coated with a thermoset layer of powder. The paint is then hardened by heattreating the sheet. Thermoplastic Polyethylene Polypropylene Vinyl Polyamide Polyester High material exploitation during production no evaporation Easy to apply thicker layer Excellent resistance to abrasion and knocks (Polyamide) Resistant to chemical effects (Polyethylene, vinyl) Good adherence (polyester) Bad resistance to weather (Polyethylene, epoxy) Bad resistance to UV (Polyester) Bad resistance to weather (Polyester) Wastage during production in the form of evaporation if there is over-spraying Thermosetting Good resistance to weather (polyester, vinyl) Epoxy Polyester Epoxy-polyester (mix) High corrosion stability Good coating elasticity Good formability Good mechanical features (Epoxy) Easy to apply finer thickeness Sheets can be scored without the paint cracking Polyester has 16 years life expectancy NB: When ordering coated sheets it is a good idea to order the entire load in one go to avoid slight differences in colour as a result of further orders being filled from different batches. Alloys and maintenance When using coated sheets in construction, Alumeco A/S recoends using sheets made of aluminium alloy EN AW-5754 as this has corrosion resistance properties. The use of other alloys invalidates the guarantee. The sheet surface should be maintained by being cleaned at least once a year to uphold the guarantee for the material supplied. 29

30 Aluminium Tread Plates / Barely Seed Plates / Gangway Profiles Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Mechanical Properties: Temper Thickness Tensile strength R m N/ 2 0.2% proof stress R p 0.2 N/ 2 Elongation A 50 min. max. min. % min. % min. A Brinell hardness HBS H H H For more information see page 56 We can also supply: One bar (Not in stock) Quintet Barely Seed Duet (Not in stock) Gangway profiles Example of application 30

31 Aluminium Tread Plates Quintet - Sea water-resistant EN AW-5754 H114 - EN AW 5086-H244 EN Size Kg/ pcs. Thickness 2/4 Kg/ pcs. Thickness 3/4 Kg/ pcs. Thickness 3/5 * Price is dimension dependent. All stated weights are theoretical weights, which may vary. ** Primed on the back of the plate. Kg/ pcs. Thickness 5/7 Kg/ pcs. Thickness 7/ x x x x * x * * 2500 x ** 2500 x ** Aluminium Barely Seed Plates - Sea water-resistant EN AW-5754 H244 - EN AW 5086 H244 EN 573-3, 1386 Thickness Kg/pcs. ** Primed on the back of the plate x / / / Kg/pcs x 8000 Kg/pcs x / ** ** Aluminium Gangway Profile - Sea water-resistant - Anti-slip surface EN AW-6060 EN 755-1, 755-2, Extremely suitable for gangways, stairs etc. Can be supplied cut to length subject to inquiry. Profile no. Kg/m Size Ix-value 4 Wx-value P x P Profile no. Kg/m Size Ix-value 4 Wx-value P x ,8 Not in stock P Profile no. Kg/m Size Ix-value 4 Wx-value P x P

32 Aluminium Bars - Round Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Special Characteristics: Extremely suitable for anodizing, good weldability. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Special Characteristics: High corrosion resistance, good weldability, high strength, suitable for anodizing. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Ni Zn Bi Sn Pb Others Al Rest Special Characteristics: Short-chipped - suitable for machining. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Ti Bi Pb Others Al <0.3 <0.3 < < Rest Special Characteristics: Short-chipped, high corrosion resistance, high strength, suitable for anodizing. To obtain optimal surface when anodizing, it is recoended to turn min. 0.5 up to ø28 and 1 above that. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Bi Pb Others Al 0,4 0,7 5,0-6,0 0,3 0,2-0,6 0,2-0,39 0,15 Rest Special Characteristics: Short-chipped, suitable for machining, polished surface, can be protectively anodized. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Ti Others Al Rest Special Characteristics: Short-chipped, suitable for machining, high strength. Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Ti Others Al Rest Special Characteristics: Suitable for machining, very high strength. EN AW EN AW EN AW EN AW

33 Aluminium Bars - Round EN 573-3, 754-1, 754-2, 754-3, 755-1, 755-2, Diameter Kg/m EN AW-2007 EN AW-2011 (cut and drilling quality) EN AW-2014 (cut and drilling quality) EN AW-6026 (cut and drilling quality) EN AW-6060 EN AW-6082 EN AW-5083 (Corrosion resistance) EN AW-5754EN AW-7075 (Corrosion resistance) Length: Length: Length: Length: Length: Length: Length: Length: Length: * 1) * 1) * 1) * 1) ) * 1) * 1) 2) * 1) ) 2) * 1) 1) 2) * ) 2) 1) * 1) * 1) * 1) * 1) * 1) ) 2) 1) * 1) * 1) 1) 2) * 1) ) 2) 1) 1) * 1) 2) * 1) * 1) * 1) * 1) * 1) ) 2) 1) 1) * 1) 1) 2) * 1) * 1) * 1) 2) 1) 2) * * 1) * 1) ) 2) * 1) 1) * 2) * 1) 2) * 1) * 1) ) 2) 1) 1) 1) 2) * 1) 1) 2) * 2) 1) 2) * ) 2) 1) 1) 2) * 1) * 1) 1) ) 2) 1) 1) 1) * 1) 1) 2) * 2) 1) 2) * 1) * 1) ) * 1) 2) ) 2) 1) 1) 1) 1) 2) * 2) 1) 2) * 1) 1) 2) 2) * 1) ) 1) ) 2) * 1) 1) 1) 2) 1) 2) * * 1) ) * 1) 1) 2) ) 2) 1) 1) 1) 2) 2) * 2) 1) 2) * 1) 1) * 2) 1) 2) * ) 2) 1) 1) 1) 2) 1) 2) ) ) ) 2) 1) 2) 1) 1) 2) 2) * 2) * 1) 2) 1) 2) ) 2) * 1) 2) 2) 1) 2) 2) * 1) 2) 1) 2) * ) 2) * 1) 2) 2) 1) 2) 2) * 2) 2) ) 2) 2) 2) 2) * 2) * 2) ) * 2) 2) 2) 2) * 2) 2) *Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 in diameter the length is 3000 for alloy EN AW All stated weights are theoretical weights, which may vary. Bars are supplied drawn, extruded or cast. More information on page 34. Please also ask for these alloys: EN AW And cut and drilling quality without lead. 33

34 Aluminium Bars - Round / Square / Hexagonal Aluminium Bars - Round EN 573-3, 755-1, 755-2, Diameter Kg/m EN AW-2007 (cut and drilling quality) EN AW-2011 (cut and drilling quality) EN AW-2014 (cut and drilling quality) EN AW-6026 (cut and drilling quality) EN AW-6082 EN AW-5083 (Corrosion resistance) EN AW-5754 EN AW-7075 (Corrosion resistance) Length: Length: Length: Length: Length: Length: Length: Length: * 2) * 2) 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) 2) * 2) * 2) 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) 2) * 2) * 2) * 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) * 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 3) * 2) 2) * 2) * 2) 2) ) 2) * 2) 3) * 2) * 2) * 2) * 2) * 2) 3) * 2) 2) 2) * 2) * 2) * 2) * 2) 3) * 2) * 2) * 2) * 2) 3) * 2) 2) * 2) * 2) 2) * 2) 3) 2) * 2) * 2) 3) * 2) * 2) * 2) * 3) 2) * 2) * 2) 3) * 2) 3) * 2) * 2) 3) 2) 3) * 2) * 2) * 2) 3) * 2) 3) * 2) ) 3) * 2) 3) 2) 3) * 2) * 2) 3) * 2) 3) * 2) * 2) * 3) * 2) * 2) 3) * 2) * 2) * 2) * 2) 3) * 2) 3) * 2) * 3) * 2) 3) * 2) * 3) * 2) 3) * 2) * 2) 3) * 2) 3) * 2) * 2) * 2) * 3) * 2) 3) * 2) * 3) *Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 in diameter the length is 3000 for alloy EN AW Please also ask for these alloys: EN AW-2017, EN AW And cut and drilling quality without lead. 34

35 Aluminium Bars - Square EN 573-3, 754-1, 754-2, 754-4, 755-1, 755-2, Kg/m EN AW-2007 (cut and drilling quality) EN AW-2011 (cut and drilling quality) * Price is dimension dependent. 1)Drawn 2)Extruded For bars over 60 the length is 3000 for alloy EN AW EN AW-6026 (cut and drilling quality) EN AW- 6060/6063 Length: 6000 EN AW-6082 Length: Length: Length: ) * 2) * 1) 2) * 2) 2) * 2) * 1) * 2) 2) * 2) * 1) 1) * 2) 2) * 2) * 1) * 2) 2) * 2) * 1) 1) 2) * 2) * 1) * 1) 2) * 2) * 1) 1) 2) 2) * 2) 2) * 2) * 2) 1) 2) 2) * 2) * 2) * 2) * 2) 1) 2) 2) * 2) * 2) * 2) * 2) 2) 2) * 2) * 2) * 2) * 2) 2) ) * 2) * 2) 2) 2) * 2) * 2) * 2) 2) 2) ) * 2) ) * 2) ) * 2) ) * 2) * 2) * 2) * 2) * 2) * 2) Length: Aluminium Bars - Hexagonal EN 573-3, 754-1, 754-2, 754-6, 755-1, 755-2, Kg/m EN AW * Price is dimension dependent. (cut and drilling quality) Length: * * EN AW-6026 (cut and drilling quality) Length: * * * * * * * All stated weights are theoretical weights, which may vary. 35

36 Aluminium Profiles - Flat Aluminium Profiles EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 EN 573-3, 755-1, 755-2, W X H kg/m W X H kg/m * Price is dimension dependent. Profiles with a thickness of more than 10 can be supplied in EN AW All stated weights are theoretical weights, which may vary. W X H kg/m * 10 x x x x * 35 x x * 10 x * 35 x * 60 x * 10 x x * 70 x * 10 x * 35 x x * 12 x * 35 x * 70 x * 12 x x x * 12 x x * 70 x * 15 x x x x x x x x x * 15 x x x * 15 x x x * 15 x x x * 15 x x * 70 x * 20 x x x x x x * 20 x x x x * 45 x x * 20 x x x * 20 x x x x * 45 x * 75 x * 20 x * 45 x * 80 x * 20 x x * 80 x x x x x x x x x x x x x * 25 x x x * 25 x x x x x x x x x x x x * 25 x x x x x * 80 x x x x x * 60 x x x * 60 x * 80 x * 30 x * 60 x x x x x x x * 90 x x x x x x * 90 x x * 60 x x * 30 x x * 100 x * 35 x x * 100 x * 35 x * 60 x * 100 x More information on page 37. We stock certain dimensions with DNV-certificate.

37 Aluminium Profiles EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 EN 573-3, 755-1, 755-2, W X H kg/m W X H kg/m W X H *Price is dimension dependent. Profiles with a thickness of more than 10 can be supplied in EN AW All stated weights are theoretical weights, which may vary. Certain dimensions can also be supplied in alloy EN AW 6012/6026. kg/m 100 x * 120 x * 150 x x * 120 x x x * 120 x * 160 x x * 120 x * 165 x x * 120 x x x * 120 x x x * 125 x * 180 x x * 125 x x * 100 x * 125 x x x x x x x x x * 134 x x x * 140 x * 200 x * 100 x * 140 x x * 110 x * 140 x * 200 x * 120 x * 150 x * 200 x x * 150 x x x x * 310 x x x * 310 x x x * 120 x x We stock certain dimensions with DNV-certificate. Aluminium Profiles EN AW-2007 Manufacturing length 3000 EN 573-3, 755-1, 755-2, W X H *Price is dimension dependent. kg/m W X H kg/m W X H kg/m * 20 x * 50 x * 60 x * 25 x * 50 x * 70 x * 30 x * 50 x * 70 x * 30 x * 50 x * 80 x * 30 x * 50 x * 80 x * 40 x * 60 x * 80 x * 40 x * 60 x * 90 x * 40 x * 60 x * 90 x * 40 x * 60 x * 90 x * 50 x * 60 x * 100 x * 100 x

38 Aluminium Profiles - U / T Aluminium Profiles - U - EN AW-6060 T6 Manufacturing length 6000 EN 573-3, 755-1, 755-2, Even-sided W X H x W x T * Price is dimension dependent. kg/m Uneven-sided W X H x W x T kg/m Uneven-sided W X H x W x T 10 x 10 x 10 x x 10 x 20 x x 50 x 30 x * 10 x 10 x 10 x * 20 x 15 x 20 x * 30 x 50 x 30 x x 12 x 12 x x 20 x 10 x * 40 x 50 x 40 x * 14 x 14 x 14 x * 15 x 20 x 15 x * 30 x 60 x 30 x x 15 x 15 x * 30 x 20 x 30 x * 30 x 60 x 30 x x 20 x 20 x * 40 x 20 x 40 x * 40 x 60 x 40 x * 20 x 20 x 20 x x 25 x 15 x * 40 x 60 x 40 x * 25 x 25 x 25 x * 15 x 30 x 15 x x 60 x 40 x x 25 x 25 x * 15 x 30 x 15 x * 40 x 70 x 40 x * 30 x 30 x 30 x * 20 x 30 x 20 x * 30 x 80 x 30 x x 30 x 30 x x 30 x 20 x * 40 x 80 x 40 x * 30 x 30 x 30 x * 40 x 30 x 40 x * 40 x 80 x 40 x * 35 x 35 x 35 x * 20 x 35 x 20 x x 80 x 40 x * 40 x 40 x 40 x * 20 x 40 x 20 x * 50 x 80 x 50 x x 40 x 40 x * 20 x 40 x 20 x * 40 x 100 x 40 x * 40 x 40 x 40 x x 40 x 25 x * 40 x 100 x 40 x * 50 x 50 x 50 x * 30 x 40 x 30 x * 50 x 100 x 50 x * 50 x 50 x 50 x * 30 x 40 x 30 x x 100 x 50 x * 50 x 50 x 50 x * 25 x 45 x 25 x * 50 x 100 x 50 x 8 x 6 x * 60 x 60 x 60 x * 20 x 50 x 20 x * 55 x 120 x 55 x * 60 x 60 x 60 x * 25 x 50 x 25 x x 120 x 60 x kg/m 30 x 50 x 30 x * 100 x 200 x 100 x Aluminium T-profiles - EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 EN 573-3, 755-1, 755-2, Even-sided H x W x T * Price is dimension dependent. kg/m Even-sided H x W x T kg/m Uneven-sided H x W x T kg/m 20 x 20 x * 50 x 50 x * 50 x 30 x * 25 x 25 x * 50 x 50 x * 100 x 50 x * 25 x 25 x x 50 x x 30 x * 60 x 60 x * 40 x 40 x x 60 x x 40 x x 80 x

39 Aluminium Profiles - Angle Aluminium Profiles - EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length EN 573-3, 755-1, 755-2, Even-sided W x H x T kg/m Uneven-sided W x H x T kg/m * Price is dimension dependent. All stated weights are theoretical weights, which may vary. Uneven-sided W x H x T kg/m * 10 x 10 x x 10 x * 60 x 40 x x 15 x x 10 x x 40 x x 15 x * 20 x 10 x * 60 x 40 x x 20 x x 15 x * 60 x 50 x x 20 x x 10 x * 65 x 50 x * 20 x 20 x * 25 x 15 x * 65 x 50 x x 25 x * 25 x 15 x * 70 x 20 x x 25 x * 25 x 20 x * 70 x 20 x * 25 x 25 x * 25 x 20 x * 70 x 25 x x 25 x * 30 x 10 x * 70 x 30 x x 30 x * 30 x 15 x * 70 x 50 x x 30 x * 30 x 15 x * 75 x 50 x x 30 x * 30 x 15 x * 75 x 50 x x 30 x * 30 x 20 x * 75 x 50 x x 35 x x 20 x x 50 x x 35 x * 30 x 25 x * 80 x 15 x * 35 x 35 x * 30 x 25 x * 80 x 20 x * 40 x 40 x * 35 x 20 x * 80 x 30 x * 40 x 40 x * 35 x 25 x * 80 x 40 x x 40 x * 35 x 30 x * 80 x 40 x x 40 x * 40 x 10 x * 80 x 40 x * 40 x 40 x * 40 x 15 x * 80 x 40 x * 45 x 45 x x 20 x * 80 x 50 x * 45 x 45 x * 40 x 20 x x 50 x * 50 x 50 x * 40 x 20 x * 90 x 50 x x 50 x * 40 x 25 x * 100 x 20 x * 50 x 50 x x 25 x * 100 x 30 x x 50 x * 40 x 25 x x 40 x x 50 x * 40 x 25 x x 50 x * 50 x 50 x * 40 x 30 x x 50 x * 50 x 50 x * 40 x 30 x x 50 x * 60 x 60 x * 40 x 30 x x 50 x * 60 x 60 x * 40 x 30 x * 100 x 50 x * 60 x 60 x * 45 x 30 x * 100 x 50 x * 60 x 60 x * 50 x 15 x * 100 x 60 x x 60 x * 50 x 20 x * 100 x 60 x * 60 x 60 x * 50 x 20 x * 100 x 65 x * 60 x 60 x x 25 x * 100 x 65 x * 70 x 70 x * 50 x 25 x * 100 x 75 x * 70 x 70 x * 50 x 25 x * 100 x 75 x * 70 x 70 x * 50 x 25 x * 120 x 40 x * 75 x 75 x * 50 x 30 x * 120 x 50 x * 75 x 75 x * 50 x 30 x * 120 x 60 x * 75 x 75 x x 30 x * 120 x 80 x * 75 x 75 x x 30 x * 125 x 80 x * 80 x 80 x * 50 x 40 x * 130 x 65 x * 80 x 80 x * 50 x 40 x x 65 x * 80 x 80 x * 60 x 15 x * 130 x 75 x * 80 x 80 x * 60 x 20 x * 130 x 80 x x 80 x * 60 x 25 x * 150 x 50 x * 80 x 80 x * 60 x 30 x x 75 x * 100 x 100 x * 60 x 30 x * 150 x 75 x * 100 x 100 x * 60 x 30 x * 150 x 100 x * 100 x 100 x * 60 x 30 x * 200 x 100 x x 100 x * 60 x 40 x x 40 x We stock certain dimensions with DNV-certificate. 39

40 Aluminium Tubes - Square / Rectangular Aluminium Tubes - Square - EN AW T6 EN AW-6063 T6 Length: 6000 EN 573-3, 755-1, 755-2, 755-7, kg/m kg/m kg/m kg/m 10 x 10 x *R 30 x 30 x * 60 x 60 x * 150 x 150 x x 12 x x 30 x * R 60 x 60 x * 15 x 15 x x 40 x * 60 x 60 x x 15 x * R 40 x 40 x x 70 x * 16 x 16 x * R 40 x 40 x * 70 x 70 x x 18 x * R 40 x 40 x x 80 x x 20 x x 45 x * 80 x 80 x x 20 x * 50 x 50 x * R 80 x 80 x x 20 x R 50 x 50 x x 90 x x 25 x x 50 x * 100 x 100 x x 20 x * R 50 x 50 x *R 100 x 100 x x 25 x x 50 x x 100 x *R 25 x 25 x * 55 x 55 x * 100 x 100 x * 25 x 25 x * R 60 x 60 x * 120 x 120 x * Price is dimension dependent. R) Also supplied with corner radius. Price on request. R = Corner radius Length for profiles with corner radius, ask Alumeco. Aluminium Tubes - Rectangular - EN AW-6060 T6 Length: 6000 EN 573-3, 755-1, 755-2, 755-7, Length for profiles with corner radius, ask Alumeco. R = Corner radius * Price is dimension dependent. All stated weights are theoretical weights, which may vary. 40 kg/m kg/m kg/m 20 x 10 x * 60 x 20 x * 100 x 50 x * 20 x 10 x * 60 x 25 x * 100 x 50 x * 20 x 15 x * 60 x 30 x * 100 x 60 x x 15 x * 60 x 30 x * 100 x 60 x * 25 x 20 x * 60 x 40 x * 100 x 80 x * 30 x 15 x x 40 x * 120 x 18 x R 30 x 20 x * 60 x 40 x * 120 x 20 x * 30 x 25 x x 40 x * 120 x 30 x * 35 x 20 x * 60 x 50 x * 120 x 40 x * 35 x 25 x * 70 x 20 x * 120 x 40 x * 40 x 15 x * 80 x 20 x * 120 x 40 x x 20 x * 80 x 30 x * 120 x 50 x x 20 x * 80 x 30 x * 120 x 60 x * 40 x 20 x * 80 x 40 x * 120 x 60 x * 40 x 20 x x 40 x * 120 x 60 x x 25 x * 80 x 40 x * 140 x 50 x * 40 x 30 x * R 80 x 50 x * 150 x 40 x * 40 x 30 x * 80 x 50 x x 50 x * 50 x 15 x * 80 x 60 x * 150 x 50 x x 20 x * 90 x 30 x * R 150 x 50 x * 50 x 25 x x 18 x * 150 x 100 x * 50 x 25 x x 20 x * 160 x 40 x x 30 x * 100 x 25 x * 180 x 40 x x 30 x * 100 x 30 x * 200 x 50 x x 30 x * 100 x 40 x * 200 x 100 x * 50 x 34 x x 40 x * 200 x 100 x * 50 x 40 x * 100 x 40 x * 50 x 40 x * 100 x 40 x * 50 x 40 x * 100 x 50 x * 50 x 40 x x 50 x Other dimensions can be supplied subject to inquiry.

41 Aluminium Profiles - Anodized Aluminium Profiles nature anodized with E6/20 microns EN AW-6060 T6 Manufacturing length EN 573-3, 755-1, 755-2, 755-7, 755-8, Profile anodizing W x H x T kg/m Even-sided 15 x 15 x x 20 x x 25 x x 30 x x 30 x x 35 x x 40 x W x H x T kg/m Even-sided 20 x 20 x x 20 x x 25 x x 30 x x 20 x x 40 x x 40 x x 20 x W x H x W x T kg/m Even-sided 10 x 20 x 10 x x 15 x 15 x x 20 x 20 x x 40 x 20 x x 25 x 25 x x 20 x 40 x

42 Aluminium Profiles - Bulb / Aluminium Tubes - Round Aluminium Profiles - Bulb EN AW-6082 T6 - EN AW-5083 H112 Manufacturing lengths EN 573-3, 755-1, 755-2, Dimension H x S kg/m C1 C2 Not in stock. 60 x x x x x x x All stated weights are theoretical weights, which may vary. C2 H C1 S Aluminium Tubes - Round EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 EN-573-3, 755-1, 755-2, 755-7, D OD x t * Price is dimension dependent. All stated weights are theoretical weights, which may vary. More information on page kg/m OD x t kg/m OD x t 6.0 x * 22.0 x * 40.0 x x * 22.0 x * 40.0 x x x x * 10.0 x x * 40.0 x * 10.0 x x * 40.0 x x x x * 12.0 x x x * 12.0 x * 25.0 x * 42.0 x * 13.0 x * 25.0 x * 42.0 x * 14.0 x x * 42.0 x * 15.0 x x * 42.0 x x * 30.0 x x * 15.0 x x * 45.0 x x * 30.0 x x * 16.0 x * 30.0 x * 48.0 x * 16.0 x * 30.0 x * 48.0 x x * 32.0 x * 48.3 x * 18.0 x * 32.0 x x x * 32.0 x x * 18.0 x * 32.0 x * 50.0 x * 19.0 x x * 50.0 x x x * 50.0 x * 19.0 x * 35.0 x * 50.0 x x * 35.0 x x x * 35.0 x * 50.0 x * 20.0 x * 36.0 x * 50.0 x x * 38.0 x * 50.0 x * 20.0 x * 38.0 x x * 20.0 x * 38.0 x * 55.0 x x x kg/m

43 Aluminium Tubes - Round EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 EN 573-3, 755-1, 755-2, 755-7, D OD x t kg/m OD x t kg/m OD x t * 55.0 x x * x kg/m * 55.0 x * 90.0 x * x * 60.0 x * 90.0 x * x * 60.0 x * 96.0 x * x * 60.0 x x * x x * x * x * 60.0 x * x * x x x * x * 60.0 x * x * x * 60.0 x * x * x * 60.0 x * x * x * 63.0 x * x * x * 65.0 x * x * x * 65.0 x * x * x * 70.0 x * x * x * 70.0 x * x * x * 70.0 x x * x x x x * 70.0 x * x * x x x * x x * x * x * 75.0 x * x * x * 76.0 x * x * x * 80.0 x * x * x * 80.0 x * x * x * 80.0 x * x * x x * x * x * 80.0 x * x * x * 80.0 x * x * x * 80.0 x * x * x * 86.0 x * x * x * 90.0 x * x * x * 90.0 x x * Price is dimension dependent. All stated weights are theoretical weights, which may vary. Other dimensions can be supplied subject to inquiry. Please also ask for these alloys: EN AW-5754, EN AW-5083, EN AW-6012, EN AW

44 Aluminium - Roller Tubes Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Roller Tubes T.O.P.-quality: Material 6060 Roller Tubes H.T.-quality: Material 6060 Roller Tubes I.S.Q.-quality: Material 6060 Temper-hardened Strength T6 Type: Hot-extruded via chamber mould and drawn Tolerances: Outside diameter ISO k 13 Inside diameter ISO H 11 Inequality of wall in % of the nominal wall thickness S < 7 6% S > 7 5% Temper-hardened Strength T6 Type : Hot-extruded via chamber Tolerances: Outside diameter ISO k 15 Inside diameter ISO M 15 Inequality of wall in % of the nominal wall thickness S > 10 5% Temper-hardened Strength T6 Type : Hot-extruded via chamber Tolerances: Outside diameter ISO k 14 Inside diameter ISO H 14 Inequality of wall in % of the nominal wall thickness S < 10 5% Straightness: 0.2 /m Straightness: 0.5 /m Straightness: D < 250 D > /m Concentric running accuracy between centres: Max: 0.4 /m Concentric running accuracy between centres: Max: 1.0 /m Concentric running accuracy between centres: D < /m D > /m Economy and quality: High quality roller tubes - a necessity for economical production. Fine tolerances on outside and inside diameters, uniform thickness and concentric running accuracy help to optimise the production process and reduce material consumption. Additional technical and economical benefits: Few tensions Minimal imbalance Optimal chipping properties Low inertia force Highly anodizable High durability Quality example: Roller tube in T.O.P.-quality. Dimensions 120 x 7 x 1800 Outside diameter ISO k 13 Inside diameter ISO H 11 Hight of arch, max: 0.36 Concentric running accuracy between centres, max: 0.72 Inequality of wall, max:

45 Roller Tubes - EN AW-6060 T6 Manufacturing length 6010 EN 755-1, D OD x t kg/m Quality OD x t kg/m Quality OD x t kg/m Quality 30 x T.O.P. 110 x H.T. 170 x H.T. 40 x T.O.P. 110 x H.T. 180 x T.O.P. 40 x T.O.P. 110 x H.T. 180 x T.O.P. 50 x T.O.P. 114 x T.O.P. 180 x T.O.P. 50 x T.O.P. 120 x T.O.P. 180 x H.T. 50 x T.O.P. 120 x T.O.P. 180 x H.T. 50 x T.O.P. 120 x T.O.P. 182 x T.O.P. 60 x T.O.P. 120 x T.O.P. 190 x T.O.P. 60 x T.O.P. 120 x H.T. 190 x T.O.P. 60 x T.O.P. 120 x H.T. 190 x T.O.P. 60 x T.O.P. 125 x T.O.P. 195 x I.S.Q. 60 x T.O.P. 128 x T.O.P. 200 x T.O.P. 60 x T.O.P. 130 x T.O.P. 200 x T.O.P. 60 x H.T. 130 x T.O.P. 200 x I.S.Q. 62 x T.O.P. 130 x T.O.P. 200 x I.S.Q. 70 x T.O.P. 130 x T.O.P. 205 x H.T. 70 x T.O.P. 130 x H.T. 210 x I.S.Q. 70 x T.O.P. 132 x T.O.P. 210 x I.S.Q. 70 x T.O.P. 140 x T.O.P. 210 x I.S.Q. 75 x T.O.P. 140 x T.O.P. 220 x I.S.Q. 75 x T.O.P. 140 x T.O.P. 220 x I.S.Q. 80 x T.O.P. 140 x H.T. 225 x I.S.Q. 80 x T.O.P. 140 x H.T. 230 x I.S.Q. 80 x T.O.P. 144 x T.O.P. 240 x I.S.Q. 80 x H.T. 150 x T.O.P. 240 x I.S.Q. 80 x H.T. 150 x T.O.P. 250 x I.S.Q. 81x T.O.P. 150 x T.O.P. 250 x I.S.Q. 90 x T.O.P. 150 x T.O.P. 260 x I.S.Q. 90 x T.O.P. 150 x H.T. 270 x I.S.Q. 90 x H.T. 152 x T.O.P. 285 x I.S.Q. 90 x H.T. 152 x T.O.P. 285 x I.S.Q. 100 x T.O.P. 160 x T.O.P. 285 x I.S.Q. 100 x T.O.P. 160 x T.O.P. 300 x I.S.Q. 100 x T.O.P. 160 x T.O.P. 303 x I.S.Q. 100 x H.T. 160 x H.T. 310 x ,20 I.S.Q. 100 x H.T. 160 x H.T. 325 x I.S.Q. 102 x T.O.P. 170 x T.O.P. 360 x I.S.Q. 106 x T.O.P. 170 x T.O.P. 365 x I.S.Q. 110 x T.O.P. 170 x T.O.P. 110 x T.O.P. 170 x H.T. Can also be supplied cut to length. All stated weights are theoretical weights, which may vary. Please allow approx. 1-2 weeks delivery time for dimensions not in stock. 45

46 Aluminium - Cylinder Tubes Chemical Composition: EN AW EN 573-3: 2009 Si Fe Cu Mn Mg Cr Zn Others Al Rest Specification Aluminium cylinder tubes: Alloy: EN AW 6060 T6 Inside Ø tolerance: ISO H11 Roughness: Ra < 1 micron Surface: Surface: Fine-drawn, no covering Fine-drawn, internally and externally hard Layer thickness: 25 microns ± 5 microns Strength: 450 HV Straightness: 0.35 per m Cylinder tubes for any use Nominal width Wall thickness Length up to 6000 Aluminium Cylinder tubes of high precision are always in stock A technically extensive, high quality range includes different formats to meet individual problem solutions. Chamber-pressed Chamber-pressed and drawn Piercing-pressed and drawn Non-covered Hard anodized Additional technical data and benefits High wear resistance Fine tolerances High quality surface Excellent low friction properties Lightweight Pressure and corrosion resistant Wear - resistance Wall thickness under constant load Hard anodized Galvanized tempered chromium Cyanide tempered steel Annealed steel (105 kp/) Diameter () Wall thickness AL Pressure (bar) Standard values for the definition of the wall thickness on aluminium cylinder tubes, Alloy , safety to 0.2-limit: Degrading µm Profitability and quality The cylinder tube is a special product in our extensive product range. Using this product, high precision can be achieved, which means they are often used as control and operating cylinders. Prices for special dimensions and formats available on request. 46

47 Aluminium Cylinder Tubes - EN AW-6060 T6 Manufacturing length 3050 EN 573-3, EN 755-1, D Nominal size Outside diameter x wall thickness kg/m x x x x x x x x x x x x x x x x x x x , Nominal size Outside diameter x wall thickness x x x x 4.0 kg/m x x x x x x x x x x x x x x x Aluminium Profile Cylinder Tubes EN AW-6060 T6 Manufacturing length 3000 EN 573-3, 755-1, 755-2, For metric thread A () P B () C () D () F () E () G () H () I () 32.0 H ± H ± H ± H ± H ± H ± H ± I C R C 90 A A P B D F E H A G A For self-cutting screws A () P B () C () D () F () E () G () H () I () 32.0 H ± H ± H ± H ± H ± H ± H ± H ± I C R C 90 A A P B D F E H A G A 47

48 Aluminium - Fittings 90 Aluminium Welding Bends - EN AW EN AW-6060 EN 573-3, DIN 1725, DIN 2605 (Bauart 3 - Long radius), DIN EN 755-1,2,8 90 d1 a s a d1 We would be pleased to receive your inquiries for 180 bends as well as dimen sions not mentioned. d1 Dimension s a d1 Dimension s a 25 x x x x x x x x x x x x x x Dimension s a d1 Dimension s a 80 x x x x x x x x x x Aluminium Screw Sockets EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN DIN 2999 Dimension Inch l Dimension Outside Ø d Length I /4" /8" /2" /4" " /4" d /2" " /2" " Aluminium Nipples EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3, DIN 2999 Dimension Dimension Outside Ø Inch d l A Length A /4" /2" /4" d Length I 1 3 1" /4" /2" " We can also supply: Alu. welding collars / Alu. collars / Alu. welding nipples / Alu. T-pieces / Alu. reductions. 48

49 Transport systems TOP SECTIONS BOTTOM SECTIONS MIDDLE SECTIONS CORNER SECTIONS AND MUCH MORE... Aluminium transport systems are delivered directly from stock. For more details please visit us at 49

50 Aluminium - Cargo Sections Aluminium Cargo Sections - EN AW-6005A T6 Manufacturing length 6000 EN 573-3, EN 755-1, 755-2, ,4 133,3 6,3 Ix = Wx = Iy = Wy = Profile 7069 Weight per m 8.70 Not in stock 198 2,5 3,3 38 Not in stock Ix = Wx = Iy = Wy = Profile 1517 Weight per m 2.45 Ix = Wx= Iy = Wy = ,5 Ix = Wx = Iy = Wy = ,1 Profile ,5 Profile ,4 Weight per m Not in stock Weight per m ,5 Ix = Wx = Iy = Wy = Profile Weight per m 8.90 Not in stock 228,5 2 3 Not in stock 24 Ix = Wx = Iy = Wy = Profile 7067 Weight per m ,7 6,35 52 Ix = Wx = Iy = Wy = Profile 7242 Weight per m Ix = Wx = Iy = Wy = Profile 7003 Weight per m ,4 6,3 51 Ix = Wx = Iy = Wy = Profile ,8 4,2 50,0 Ix = Wx = Ix = Wx = Profile Can be supplied cut to length. Weight per m 2.20 Not in stock Not in stock Weight per m Ix = Wx = Ix = Wx = Not in stock Profile 7001 Weight per m 2.30 All stated weights are theoretical weights, which may vary. 50

51 Aluminium/Steel - Joint Compositions / Aluminium - Strongbacking Aluminium/Steel Joint Compositions Dimension: (H x W) H = St + Al + Al Weight pr. m 34 x 24 in lengths of 3800 ( ) ca. 4.6 kg 34 x 28 in lengths of 3800 ( ) ca. 5.3 kg Other dimensions on request. Please note: 1. Do not heat above 300 C 2. Do not bend with a radius less than Aluminium 3 Aluminium AIMg 4,5 Mn 3 Steel St 52,3 Aluminium-Strongbacking: Standard types , For welding steel constructions. Extruded aluminium profile in a sea water-resistant alloy, cut to length. Bridge grooved to customer specifications Dim: (Profile) 280 x 40. We also supply in other widths, e.g. 560, 770 and 840. Can be supplied grooved (single or multiple) according to customer specifications. 120 Advantages: Quick, recyclable, cost reducing ,

52 Aluminium - Special Profiles Alumeco takes part - from the very first idea to the finished product In the development phase you will find that Alumeco is an active, creative and highly qualified sparring partner during the whole process from the very first idea to the finished product solution. It is about speaking the same language as you and reading your demands in the particular situation. Only few competitors match the competence and know-how that Alumeco has accumulated concerning development of customer designed profiles in aluminium. We know the many applications of this material. We know our customer s demands and have a technical knowledge enabling us to carry on a dialogue on a very high level. That very dialogue with our customers is the prerequisite for developing individual solutions and customer designed profiles. Logic and logistics in an extended co-operation The co-operation with Alumeco does not necessarily have to end as soon as the product has been developed. We are also an efficient sparring partner within the fields of: Stock keeping Logistics Purchasing Assembling Packing Delivery Outsourcing Many companies consider what functions they with advantage can entrust to external partners. This is also true for the total handling of aluminium. More and more of Alumeco s customers choose to outsource the entire flow of aluminium to us. For these customers, Alumeco takes care of all business from ordering to production and transportation. The result is a more efficient business where everyone is focusing on what they do best. For Alumeco it is aluminium. 52

53 See more examples on our homepage Hanging profile Hat profile Profiles for door and window Profiles at your free disposal Alumeco has a certain number of dies at its disposal which can be used by all our customers. The die costs are already paid, and no extra costs are added. You can find more profile drawings on our site: 53

54 Colour Marks According to Alloy To avoid mixing materials we have marked our profiles and bars: Alloy (EN AW) Alloy DIN Colour 2007 Al Cu Mg Pb Black (RAL 9004) 2011 Al Cu Bi Pb Red (RAL 3020) 2014 Gold (RAL 1036) 6026 Orange (RAL 2004) 5083 AlMg4,5Mn0,7 Brown (RAL 8002) 5754 Al Mg 3 Yellow (RAL 1023) 6005 Al Mg Si 0.7 Turquoise (RAL 5018) 6012 Al Mg Si Pb White (RAL 9010) 6012A Pink (RAL 4003) 6060 Al Mg Si 0.5 Colourless 6073 Al Mg Si 1 Green (RAL 6018) 6082 Al Mg Si 1 Blue (RAL 5010) 7075 Al Zn Mg Cu 1.5 Purple (RAL 4005) 54

55 Machining Own service centre As a natural supplement to our full service as the Band saws leading aluminium wholesaler, Alumeco offers machi In addition Alumeco disposes of saws for cutting of bars ning and sawing owing to our modern and big assem and profiles up to Ø 580. bly of machinery. In our service centre we offer sawing of aluminium plates in dimensions up to: Contact Alumeco A/S the next time you inquire cutting of plates and roundels, shortening of profiles, band width: 4300 sawing or foil application. We have the capacity to length: 7000 handle orders for both large and small numbers. thickness: 250 Circular saws For cutting of profiles and bars, Alumeco disposes of saws with cutting dimensions up to: width: 600 length:

56 Technical Information Aluminium Sheets/Plates EN 485-2: 2008 (extraction) Mechanical Properties Alloy Temper Thickness Tensile strength R m MPa Proof stress R p0.2 MPa Elongation min. % Bending radius* above to Min. Max. Min. Max. A 50 A EN AW-1200 O/H t 0t Al t 0t 23 H t 0t t 0.5t t 1.0t 31 H t 0.5t t 1.0t t 1.5t 37 H t 0t t 0.5t t 1.0t 30 H t 0.5t t 1.0t t 37 EN AW-1050A O/H t 0t 20 Al t 0t t 0.5t t 1.0t 20 H112 >_ H t 0t t 0.5t t 1.0t t 28 H t 0.5t t 1.0t t t 34 H t 0t t 0.5t t 1.0t 38 H t 0.5t t 1.0t t 1.5t t 33 EN AW-3103 O/H t 0t 27 AlMn t 0t t 1.0t 27 H t 0.5t t 1.0t t 36 H t 1.0t t 1.0t t 45 H t 0.5t t 1.0t t 36 H t 1.0t t 1.0t t 44 EN AW-3105 O/H t 29 Al Mn1Mg t 29 H t t 41 H t t 48 H H t t 47 EN AW-5005 O/H t 0t 29 AlMg t 0t t 1.0t 29 H t 0.5t t 1.0t t 39 H t 1.0t t 1.0t t 48 H22/H t 0.5t t 1.0t t 38 H24/H t 1.0t t 1.0t t 47 EN AW-5052 O/H t 0t 47 AlMg t 0.5t t t 46 * They also contain values of bend radius and hardness following sampling and test methods as described in EN These values are for information only. Brinell hardness HBS* More information on page 57 56

57 Aluminium Sheets/Plates EN 485-2: 2008 (extraction) Mechanical Properties Alloy Temper Thickness Tensile strength R m MPa Proof stress R p0.2 MPa Elongation min. % Bending radius* above to Min. Max. Min. Max. A 50 A Brinell hardness EN AW AlMg2.5 H112 >_ H H H22/H t 1.0t t 1.5t t t 61 H24/H t 1.5t t 2.0t t t 67 EN AW-5754 O/H t 0.5t 52 AlMg t 1.0t t 1.0t t H112 >_ H H H22/H t 1.0t t 1.5t t t 63 H24/H t 1.5t t 2.0t t t 70 EN AW-5083 O/H t 1.0t 75 AlMg4.5Mn t 1.0t t t H112 >_ H116 >_ t 2.0t t t H H H22/H t 1.5t t 2.0t t t 89 H24/H t t t t 99 * They also contain values of bend radius and hardness following sampling and test methods as described in EN These values are for information only. HBS* More information on page 58 57

58 Technical Information Aluminium Sheets/Plates EN 485-2: 2008 (extraction) Mechanical Properties Alloy Temper Thickness Tensile strength R m MPa Proof stress R p0.2 MPa Elongation min. % Bending radius* above to Min. Max. Min. Max. A 50 A EN AW-6082 O >_ t 0.5t 40 AlSiMgMn t 1.0t t t T4/T451 >_ t 1.5t t 2.0t t t 58 T T42 >_ t t t t T6/T651/T62 >_ t t t t 91 T651/T T61/T6151 >_ t t t t 82 T EN AW-7020 O >_ AlZn4.5Mg T4/T451 >_ t t t t 92 T6/T651/T62 >_ t t t t 104 T EN AW-7075 O t 1.0t 55 AlZn5.5MgCu t t T t t t 160 T651/T T76/T7651 >_ Brinell hardness* HBS * They also contain values of bend radius and hardness following sampling and test methods as described in EN These values are for information only. 58

59 Aluminium Bars - Extruded EN 755-2: 2008 (extraction) Mechanical Properties Alloy Temper Extruded profiles Round bardiameter Dimensions square hexagonal bars Extruded round bars Tensile strength R m 0.2% Proof stress R p 0.2 Elongation e (3) (10) D (1) S (2) e (3) N/ 2 N/ 2 A 50 A above to above to above to above to Min. Max. Min. Max. EN AW-1050A F, H112 (4) all all all Al99,5 O, H111 all all all EN AW-2007 T4, T4510, T4511 (5) AlCu4PbMgMn T4, T4510, T451 (5) T4, T4510, T451 (5) EN AW-2011 T4 (5) AlCu6BiPb T6 (5) T6 (5) T6 (5) EN AW-2014 O, H AlCu4SiMn T4, T4510, T T4, T4510, T T4, T4510, T T4, T4510, T T6, T4510, T T6, T4510, T T6, T4510, T T6, T4510, T T6, T4510, T O, H T4, T4510, T T6, T4510, T T6, T4510, T En AW-2017A O, H AlCu4MgSi(A) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H T4, T4510, T4511 (5) T4, T4510, T4511 (5) En AW-2024 O, H AlCu4Mg1 T3, T3510, T T3, T3510, T T3, T3510, T T3, T3510, T T8, T8510, T O, H T3, T3510, T T8, T8510, T EN AW-5754 F, H112 (4) AlMg3 F, H112 (4) O, H EN AW-5083 F, (4) all AlMg4.5Mn0.7 F, (4) O, H all O, H all F, (4) all O, H111 all O, H112 all EN AW-6005 T4 (5)(Å) AlSiMg T6 (5) T6 (5)(Å) T6 (5)(Å) T6 (5)(Å) T4 (5)(H) T6 (5)(H) T6 (5)(H) T6 (5) T6 (5) T6 (5) T6 (5) % min. % min. (1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide. (5) The properties can only be reached by shock cooling. 10) When a profile s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile. Å = Open profile H = Hollow profile More information on page 60 59

60 Technical Information Aluminium Bars - Extruded EN 755-2: 2008 (extraction) Mechanical Properties Alloy Temper Extruded profiles Round bardiameter Dimensions square hexagonal bars Extruded round bars Tensile strength R m 0.2% Proof stress R p 0.2 Elongation e (3) (10) D (1) S (2) e (3) N/ 2 N/ 2 A 50 A above to above to above to above to Min. Max. Min. Max. EN AW-6012 T6, T6510, T6511 (5) Al MgSiPb T6, T6510, T6511 (5) EN AW-6060 T4 (5) Al MgSi 0.5 T T T6 (5) T6 (5) T64 (5) (8) T66 (5) T66 (5) EN AW-6061 O, H Al Mg1SiCu T4 (5) T6 (5) O, H T4 (5) T6 (5) T6 (5) EN AW-6082 O, H111 all AlSi1MgMn T4 (5) T5 (Å+H) T6 (5)(Å+H) T6 (5)(Å) T6 (5)(H) T4 (5) T6 (5) T6 (5) T6 (5) T6 (5) T6 (5) EN AW-6262 AlMg1SiPb T6 (5) EN AW-6262R AlMg1SiPb T6 (5) En AW-7020 T6 (5) AlZn4.5Mg1 T6 (5) T6 (5) EN AW-7022 T6, T6510, T6511 (5) Al Zn5Mg3Cu T6, T6510, T6511 (5) EN AW-7075 O, H Al Zn 5.5MgCu T6, T6510, T T6, T6510, T T6, T6510, T T6, T6510, T T73, T73510, T7351 (9) T73, T73510, T7351 (9) T73, T73510, T7351 (9) T73, T73510, T7351 (9) O, H T6, T6510, T T6, T6510, T T6, T6510, T T73, T73510, T7351 (9) T73, T73510, T7351 (9) % min. % min. (1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (8) Bending quality. (9) Referring to supplement A and supplement B for material in this condition. (10) When a profile s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile. Å = Open profile H = Hollow profile 60

61 Aluminium Bars - Drawn EN 754-2: 2008 (extraction) Mechanical Properties Alloy Temper Material no. Round bardiameter Dimensions square hexagonal bars Drawn tube Tensile strength R m 0.2% Proof stress R p 0.2 Elongation D (1) S (2) e (3) N/ 2 N/ 2 A 50 A above to above to above to Min. Max. Min. Max. EN AW-2007 T3 (4) AlCu4PbMgMn T3 (4) T351 (4) T3 (4) T3510, T3511 (4) EN AW-2011 T AlCu6BiPb T T T T T T EN AW-6012 T4 (4) AlMgSiPb T6 (4) EN AW-6061 O, H AlMg1SiCU T4 (4) T6 (4) EN AW-6262R T6 (4) AlMg1SiPb T8 (4) T9 (4) EN AW-6262 T6 (4) AlMg1SiPb T8 (4) T9 (4) EN AW-6082 O, H AlSiMgMn T4 (4) T6 (4) T6 (4) T6 (4) (1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (4) Properties may be obtained by press quenching. % min. % min. Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group I: EN AW-1050A EN AW-1350 EN AW-6005 EN AW-6012 EN AW-6026 EN AW-6082 EN AW-6262 EN AW-6262R Width Tolerance Thickness Alloy group I 2<t<6 6<t<10 10<t<18 18<t<30 30<t<50 50<t<80 80<t< <t< <t<240 from 10 to 18 ±0.25 ±0.20 ±0.25 ± above 18 to 30 ±0.30 ±0.20 ±0.25 ±0.30 ± above 30 to 50 ±0.40 ±0.25 ±0.25 ±0.30 ±0.35 ± above 50 to 80 ±0.60 ±0.25 ±0.30 ±0.35 ±0.40 ±0.50 ± above 80 to 120 ±0.80 ±0.30 ±0.35 ±0.40 ±0.45 ±0.60 ±0.70 ± above 120 to 180 ±1.0 ±0.40 ±0.45 ±0.50 ±0.55 ±0.60 ±0.70 ±0.90 ±1.0 - above 180 to 240 ±1.4 - ±0.55 ±0.60 ±0.65 ±0.70 ±0.80 ±1.0 ±1.1 ±1.4 above 240 to 350 ±1.8 - ±0.65 ±0.70 ±0.75 ±0.80 ±0.90 ±1.1 ±1.3 ±1.5 above 350 to 450 ± ±0.80 ±0.85 ±0.90 ±1.0 ±1.2 ±1.4 ±1.6 above 450 to 600 ± ±0.90 ±1.0 ± Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group II: EN AW-2007/ EN AW-2011/ EN AW-7075 Width Tolerance Thickness Alloy group II 2<t<6 6<t<10 10<t<18 18<t<30 30<t<50 50<t<80 80<t< <t< <t<240 from 10 to 18 ±0.35 ±0.25 ±0.30 ± above 18 to 30 ±0.40 ±0.25 ±0.30 ±0.40 ± above 30 to 50 ±0.50 ±0.30 ±0.30 ±0.40 ±0.50 ± above 50 to 80 ±0.70 ±0.30 ±0.35 ±0.45 ±0.60 ±0.70 ± above 80 to 120 ±1.0 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 ±0.80 ± above 120 to 180 ±1.4 ±0.45 ±0.50 ±0.55 ±0.70 ±0.80 ±1.0 ±1.1 ±1.4 - above 180 to 240 ±1.8 - ±0.60 ±0.65 ±0.70 ±0.90 ±1.1 ±1.3 ±1.6 ±1.8 above 240 to 350 ±2.2 - ±0.70 ±0.75 ±0.80 ±0.90 ±1.2 ±1.4 ±1.7 ±1.9 above 350 to 450 ± ±0.90 ±1.0 ±1.1 ±1.4 ±1.8 ±2.1 ±2.3 above 450 to 600 ± ±1.2 ±1.4 ±

62 Technical Information Tolerances for Drawn Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy: EN AW-2007 / EN AW-2011 / EN AW-2014 / EN AW-6012 / EN AW-6026 / EN AW-6060/6063 / EN AW-6082 / EN AW-6262 / EN AW-6262R / EN AW-7075 Dimension area Square Bars Hexagonal Bars Round Bars Limit measurement (permitted deviations) Limit measurement (permitted deviations) Limit measurement (permitted deviations) from 3 to 6 0 to to to above 10 to 10 0 to to to above 10 to 18 0 to to to above 18 to 30 0 to to to above 30 to 50 0 to to to above 50 to 65 0 to to to Tolerances for Extruded Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy group: I = EN AW-6060/6063 / EN AW-6082 / EN AW-6012 / EN AW-6026 / EN AW-6262 / EN AW-6262R II = EN AW-2007/ EN AW- 2011/ EN AW-2014/ EN AW-7075 Dimension area Square Bars Hexagonal Bars Round Bars Alloy group Alloy group Alloy group I II I II I II from 8 to 18 ±0.22 ±0.30 from 10 to 18 ±0.22 ±0.30 ±0.22 ±0.30 above 18 to 25 ±0.25 ±0.35 ±0.25 ±0.35 ±0.25 ±0.35 above 25 to 40 ±0.30 ±0.40 ±0.30 ±0.40 ±0.30 ±0.40 above 40 to 50 ±0.35 ±0.45 ±0.35 ±0.45 ±0.35 ±0.45 above 50 to 65 ±0.40 ±0.50 ±0.40 ±0.50 ±0.40 ±0.50 above 65 to 80 ±0.45 ±0.70 ±0.45 ±0.70 ±0.45 ±0.70 above 80 to 100 ±0.55 ±0.90 ±0.55 ±0.90 ±0.55 ±0.90 above 100 to 120 ±0.65 ±1.00 ±0.65 ±1.00 ±0.65 ±1.00 above 120 to 150 ±0.80 ±1.20 ±0.80 ±1.20 ±0.80 ±1.20 above 150 to 180 ±1.00 ±1.40 ±1.00 ±1.40 ±1.00 ±1.40 above 180 to 220 ±1.15 ±1.70 ±1.15 ±1.70 ±1.50 ±1.70 above 220 to 270 ±1.30 ±2.00 above 270 to 320 ±1.60 ±

63 Width thickness tolerances for Cold-rolled Sheets/Plates according to EN 485-4: 2008 Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075 Thickness to 1000 above 1000 above 1250 above 1600 above 2000 above 2500 above 3000 to 1250 to 1600 to 2000 to 2500 to 3000 to 3500 above to I II I II I II I II I II I II I II ±0.02 ±0.03 ±0.04 ±0.05 ±0.05 ± ±0.03 ±0.03 ±0.04 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07 ± ±0.03 ±0.04 ±0.05 ±0.06 ±0.06 ±0.07 ±0.07 ±0.08 ± ±0.03 ±0.04 ±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ± ±0.04 ±0.05 ±0.06 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ± ±0.04 ±0.05 ±0.07 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ± ±0.05 ±0.07 ±0.09 ±0.11 ±0.10 ±0.12 ±0.11 ±0.14 ± ±0.06 ±0.08 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.15 ± ±0.06 ±0.09 ±0.11 ±0.13 ±0.12 ±0.14 ±0.14 ±0.16 ± ±0.07 ±0.10 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ± ±0.08 ±0.11 ±0.13 ±0.15 ±0.15 ±0.17 ±0.17 ±0.19 ± ±0.10 ±0.12 ±0.15 ±0.17 ±0.17 ±0.19 ±0.18 ±0.20 ± ±0.15 ±0.20 ±0.22 ±0.23 ±0.25 ±0.34 ± ±0.18 ±0.22 ±0.24 ±0.25 ±0.29 ±0.36 ± ±0.20 ±0.24 ±0.25 ±0.26 ±0.32 ±0.40 ±0.46 Width thickness tolerances for Hot-rolled Sheets/Plates according to EN 485-3: 2008 Thickness to 1250 above 1250 above 1600 above 2000 above 2500 above to to 1600 to 2000 to 2500 to ±0.28 ±0.28 ±0.32 ±0.35 ± ±0.30 ±0.30 ±0.35 ±0.40 ± ±0.32 ±0.32 ±0.40 ±0.45 ± ±0.35 ±0.40 ±0.40 ±0.50 ± ±0.45 ±0.50 ±0.50 ±0.55 ± ±0.50 ±0.60 ±0.65 ±0.65 ± ±0.60 ±0.70 ±0.75 ±0.80 ± ±0.65 ±0.75 ±0.85 ±0.90 ± ±0.75 ±0.85 ±1.00 ±1.10 ± ±0.90 ±1.00 ±1.10 ±1.20 ± ±1.10 ±1.20 ±1.40 ±1.50 ± ±1.40 ±1.50 ±1.70 ±1.90 ± ±1.70 ±1.80 ±1.90 ±2.10 ± ±2.20 ±2.20 ±2.70 ± ±2.80 ±2.80 ±3.30 ± Valid for alloy groups I & II 63

64 Profile Tolerances Generic diemension H Tolerance relative to the generic dimension Diameter of the circumscribed circel D S < D <D <D <D <D ±0.25 ±0.30 ±0.35 ±0.40 ± ±0.30 ±0.40 ±0.50 ±0.60 ± ±0.50 ±0.60 ±0.80 ±0.90 ± ±0.70 ±0.90 ±1.10 ±1.30 ± ±1.10 ±1.30 ±1.50 ± ±1.30 ±1.50 ±1.80 ± ±1.70 ±2.10 ± ±2.80 ± ±3.80 ±4.20 H Tolerance related to wall thickness Related thickness S Diameter of the circumscribed circel D < D <D <D <D ±0.20 ± ,5 3 ±0.25 ±0.40 ±0.60 ± ±0.40 ±0.60 ±0.80 ± ±0.60 ±0.80 ±1.00 ± ±0.80 ±1.00 ±1.20 ± ±1.20 ±1.50 ±1.70 ± ±1.50 ±1.80 ±2.00 ± ±2.00 ±2.20 ± Tolerance related to wall thickness Width W For right angles Deviation from straight line Z > , , , , , , , ,5 W Z 64

65 Straigthness tolerances The tolerance on the straigthness line h must be less than or equal to 1,5 /m of the lenght. Localised differences from the straight line must not exceed 0,6 /m Width b > Flatness tolerances Difference from the flatness p Hollow extruded products Wall thickness t Open extruded products 5 > Width b Twisting tolerances > On the length 1000 Tolerances on twisting t On the total length L 1000 < L 6000 L > xL (in ) 65

66 Technical Information / Reference Table Aluminium Properties - EN 485-2: 2008 Alloy Min. Proof stress R p 0.2 (N/2) Min. Tensile strength R m (N/2) Min. Elongation A5% Brinell hardness HBS Spec. weight g/cm 3 W/cmxK Coefficient of thermal expansion cm x K ( C) Weldability Annealing cm/10 6 x C Thermal conductivity Fusingpoint/ interval C Elasticmodulus conduc- Electrical tivity at 20 ohm 2 KN/ H excellent H excellent T good A T bad T bad T bad T good T bad T bad Hokotol bad The indicated numbers are guidelines only. Aluminium Material Abbreviation: Germany DIN Material no. ISO / EN-norm USA UK BS France NF Spain UNE Italy UNI Sweden SIS Al A 1050A 1B A5 L Al A 1070A - A Al A 1080A 1A A Al C A E-Al A 1350A 1E A5L L AlCuMgPb A-U4Pb L AlCuBiPb FC1 A-U 4Pb L AlCuSiMn AlCuMg A 2017A H14 A-U4G L AlCuMg H16 A-U4G AlMn N AlMg AlMg N AlMg N6 A-G AlMg 4.5 Mn N L AlMg N5 A-G3M L AlMgSi AlMgSiPb AlMgSi / /63 H9 A-GS L AlMg1SiCu H AlMgSi H30 A-SGM 0.7 L AlZn 4.5 Mg H17 A-Z5G L AlZnMgCu A-Zn5 GU AlZnMgCu L95 A-Zn5 GU L

67 Reference Table DIN-standard / EN-standard Approximate comparison, as EN-standard cannot replace DIN-standard. Al99.5 EN AW-1050A AlMg3 EN AW-5754 AlMg4.5Mn EN AW-5083 AlMgSi1 EN AW-6082 AlZnMgCu1.5 EN AW-7075 AlMg1 EN AW-5005 Tread Plate AlMg3 EN AW-5754 Round Bars Type Alloy Properties Tolerances DIN EN DIN EN DIN EN K = Cold-rolled V = Hot-rolled K V / K / V K / V K / V K / K / Drawn Extruded / / Square Bars Drawn Extruded / / Hexagonal Bars Drawn Extruded / / Flat Profiles / Angle Profiles / U-Profiles / T-Profiles / Round Tubes / Square Tubes / Temper Description Comparison DIN-standard - EN-standard DIN-standard material no. EN-Standard 1994 Temper x.xxxx.07 xxxx-h112 Hot-rolled with prescribed strength value.08 -F Hot-rolled without prescribed strength value.10-0 Soft non-hardable alloys.10 -H111 Soft, stretch-straightened non-hardable alloys.10-0 Soft hardable alloys.24 -H12 Cold-rolled to 1/4 hard.26 -H14 Cold-rolled to 1/2 hard.30 Cold-rolled to 1/1 hard.25 -H22/H32 Cold-rolled, annealed to 1/4 hard.27 -H24/H34 Cold-rolled, annealed to 1/2 hard.29 -H26/H36 Cold-rolled, annealed to 3/4 hard.31 -H28/H38 Cold-rolled, annealed to 1/1 hard.51 -T4/T451 Cold-hardened Temper Description Comparison DIN-standard - EN-standard Al A AlMg1-5005A AlMg AlMg4.5Mn-5083 AlMgSi W7-0 W11-0 W19-0 W28-0 W19 - H111 F9 - H12 F13 - H12 F22 - H12 F11 - H14 F15 - H14 F24 - H14 F15 - H18 F19 - H18 F29 - H18 G9 - H22/H32 G13 - H22/H32 G22 - H22/H32 G31 - H22/H32 G11 - H24/H34 G15 - H24/H34 G24 - H24/H34 G35 - H24/H34 G17 - H26/H36 G27 - H26/H36 W28 - H111 W - 0 F21 - T4/T T3/T351 Cold-hardened with fiber structure.71 -T6/T651 Temper-hardened F28 - T6/T T6/T651 Temper-hardened F32 - T6/T651 67

68 Technical Information EN 515: 2000 Temper Definition F 1) O 2) O1 O2 O3 H12 H14 H16 H18 H19 Hxx4 Hxx5 As fabricated (no mechanical property limits specified). Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper. Thermally treated at approximately the same time and temperature required for solution treatment and slow cooled to room temperature (formerly designated as T41). Thermomechanically processed to enhance formability, such as required for super-plastic forming (SPF). Homogenized. Strain-hardened - 1/4 hard. Strain-hardened - 1/2 hard. Strain-hardened - 3/4 hard. Strain-hardened - 4/4 hard (fully hardened). Strain-hardened - extra hard. Applies to embossed or patterned sheet or strip, fabricated from the corresponding Hxx temper. Strain-hardened - applies to welded tubes. H111 Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling. H112 H116 H22 H24 H26 H28 H32 H34 H36 H38 H42 H44 H46 H48 W Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified). Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified. Strain-hardened and partially annealed - 1/4 hard. Strain-hardened and partially annealed - 1/2 hard. Strain-hardened and partially annealed - 3/4 hard. Strain-hardened and partially annealed - 4/4 hard (fully hardened). Strain-hardened and stabilized - 1/4 hard. Strain-hardened and stabilized - 1/2 hard. Strain-hardened and stabilized - 3/4 hard. Strain-hardened and stabilized - 4/4 hard (fully hardened). Strain-hardened and painted or lacquered - 1/4 hard. Strain-hardened and painted or lacquered - 1/2 hard. Strain-hardened and painted or lacquered - 3/4 hard. Strain-hardened and painted or lacquered - 4/4 hard (fully hardened). Solution heat-treated (unstable temper). The period of natural ageing (W2h..) may also be specified. W51 Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for hand or ring forging and rolled ring). The products receive no further straightening after stretching. W510 Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 1% to 3% for extruted rod, bar, shapes and tube, 0.5% to 3% for drawn tube). The products receive no further straightening after stretching. W511 Same as W510 except minor straightening is allowed after stretching to comply with standard tolerances. W52 Solution heat-treated (unstable temper) and stress-relieved by compressing to produce a permanent set of 1-5%. W54 T1 T2 Solution heat-treated (unstable temper) and stress-relieved by restriking cold in the finish die (die forging). Cooled from an elevated temperature shaping process and naturally aged. Cooled from an elevated temperature shaping process, cold worked and naturally aged. T3 3) T31 Solution heat-treated, cold worked and naturally aged. Solution heat-treated, cold worked approximately 1% and naturally aged. T351 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. T3510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching. T3511 Same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances. T352 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged. 68

69 EN 515: 2000 Temper Definition T354 T36 Solution heat-treated stress-relieved by restriking cold in the finish die and naturally aged. Solution heat-treated, cold worked approximately 6% and naturally aged. T37 T39 T4 4) Solution heat-treated, cold worked approximately 7% and naturally aged. Solution heat-treated and cold worked to an appropriate degree to achieve the specified mechanical properties. Cold work may be carried out before or after natural ageing. Solution heat-treated and naturally aged. T42 Solution heat-treated and naturally aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. T451 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. T4510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching. T4511 Same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances. T452 T454 T5 T51 T56 T6 5) Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged. Solution heat-treated, stress-relieved by restriking cold in the finish die and naturally aged. Cooled from an elavated temperature shaping process and then artificially aged. Cooled from an elavated temperature shaping process and then artificially aged in underageing conditions to improve formability. Cooled from an elevated temperature shaping process and then artificially aged - mechanical property level higher than T5 achieved through special control of the process (6000 series alloys). Solution heat-treated and then artificially aged. T61 Solution heat-treated and then artificially aged in underageing conditions to improve formability. T6151 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching. T62 Solution heat-treated and then artificially aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. T64 Solution heat-treated and then artificially aged in underageing conditions (between T6 and T61) to improve formability. T651 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially aged. The products receive no further straightening after stretching. T6510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching. T6511 Same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances. T652 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged. T654 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged. T66 T7 T73 Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys). Solution heat-treated and then artificially overaged. Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. T732 Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. T7351 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ringand then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching. T73510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching. T73511 Same as T73510 except that minor straightening is allowed after stretching to comply with standard tolerances. T7352 T7354 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve the best stress corrosion resistance. Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged in order to achieve the best stress corrosion resistance. 69

70 Technical Information EN 515: 2000 Temper Definition T74 Solution heat-treated and then artificially overaged (between T73 and T76). T7451 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching. T74510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube 0.5% to 3% for drawn tube) and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching. T74511 T7452 T7454 T76 Same as T74510 except that minor straightening is allowed after stretching to comply with standard tolerances. Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged (between T73 and T76). Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged (between T73 and T76) Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. T761 Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. (applies to 7475 sheet and strip). T762 Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. T7651 Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching. T76510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching. T76511 Same as T76510 except that minor straightening is allowed after stretching to comply with standard tolerances. T7652 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve a good exfoliation corrosion resistance. T7654 Solution heat-treated, stress-relieved by restriking in the finish die and then artificially overaged in order to achieve a good exfoliation corrosion resistance. T79 Solution heat-treated and then artificially overaged (very limited overageing). T79510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged (very limited overageing). The products receive no further straightening after stretching. T79511 Same as T79510 except for minor straightening is allowed after stretching to comply with standard tolerances. T8 6) Solution heat-treated, cold worked and then artificially aged. T81 Solution heat-treated, cold worked and then approximately 1% and then artificially aged. T82 Solution heat-treated by the user, controlled stretched with a minimum permanent set of 2% and then artifi cially aged (alloy 8090). T832 Solution heat-treated, cold worked a controlled specific amount and then artificially aged (applies to 6063 drawn tube). T841 Solution heat-treated, cold worked and then artificially underaged (sheet and strip in alloys 2091 and 8090). T84151 Solution heat-treated, stress-relieved by stretching with a permanent set of 1.5% to 3% and then artificially underaged (plate in alloys 2091 and 8090). T851 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching. T8510 Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, profiles and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching. T8511 Same as T8510 except for minor straightening is allowed after stretching to comply with standard tolerances. T852 Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged. T854 Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged. T86 Solution heat-treated, cold worked approximately 6% and then artificially aged. T87 Solution heat-treated, cold worked approximately 7% and then artificially aged. T89 Solution heat-treated, cold worked to an appropriate degree to achieve the specified mechanical properties and then artificially aged. T9 Solution heat-treated, artificially aged and then cold worked. 70

71 Terms of Sale and Delivery 1. Validity The present Terms of Sale and Delivery shall apply to all quotations, sales and deliveries unless otherwise agreed in writing. Any terms of sale and delivery which may be printed on the order confirmation or to which the customer otherwise refers shall only be valid if this is expressly stated in our order confirmation. 2. Product Information All information about weight, dimensions and quality as well as technical data and other data stated in catalogues, prospectuses and any other advertising material shall be directional and shall only be binding to the extent they form an express part of the agreement between the parties. 3. Quotations All prices shall be subject to changes in raw material and exchange rates, delivery time subject to the goods being unsold and change of delivery time from works. If all Seller gives a written quo tation which does not state a specific time stipulated for acceptance, the quotation shall lapse if acceptance has not been received by the Seller within 2 weeks from the date of quotation. 4. Quality Buyer shall be responsible for ensuring that the technical data and the material in its entirety are suitable for his requirements. A certificate will as agreed be enclosed in accordance with agreement. Seller will check that the certificate meets the demands for the delivery but will not check the information provided in the certificate. 5. Quantity The total quantity delivered shall be subject to a margin of plus/minus 10% of the quantity specified. Calculation by weight, unit or length shall be in accordance with generally accepted practice. 6. Orders and agreement In order to be binding on Seller, an order shall be confirmed in writing by Seller, and only Seller s Terms of Sale and Delivery shall apply to the exe cution of the order. If Buyer has any objections to the contents of the order confirmation these shall be made in writing and shall be received by Seller not later than one week after the date of the order confirmation. 7. Prices and Delivery In connection with sales from stock, the prices excl. VAT and terms of payment are stated in Seller s current price list in force at the time in question shall apply. Delivery shall be ex Seller s address. Freigt payable by Buyer shall always be invoiced Buyer and shall not be paid in cash on receipt. 8. Payment Seller shall receive payment on the date specified in the invoice as the final due date for payment. If such a date has not been specified payment shall be made in cash on delivery. However, Seller reser ves the right to change the terms of payment if Seller receives information that Buyer s ability to pay has deteriorated. If the delivery is postponed because of Buyer s situation (claimant s default), Buyer shall nevertheless, unless otherwise notified by Seller, be under an obligation to make any payment to Seller as if delivery had been made at the agreed time. If payment is made after the due date, Seller shall be entitled to charge interest on the outstanding amount from time to time from the due date at the rate of interest stated on the invoice at any given time. Buyer shall not be entitled to offset any counterclaims against Seller which have not been recognized in writing by Seller and shall not be entitled to withhold any part of the purchase price because of countercla ims of any kind whatsoever. 9. Retention of Title Seller shall retain title to the goods sold with the restrictions that follow from mandatory rules of law until the full purchase price plus any costs accrued have been paid to Seller or to the party to whom Seller has assigned his right. 10. Delivery Delivery shall be made from Seller s address whether or not Seller delivers the goods sold to Buyer using his own employees or third party in accordance with a separate agreement. The time of de livery has been fixed by Seller at Seller s best estimate with the reservations made when the quotation was given/the agreement was entered into. In connection with sale of goods from stock and standard goods, a postponement of the time of delivery by 30 days due to Seller s situation shall be regarded as delivery in due time and shall be respected to the effect that Buyer cannot exercise any remedies against Seller for this reason unless otherwise agreed. In connection with sale of individually manufactured goods, Seller shall not be liable for any form of delay irrespective of the duration hereof to the effect that Buyer cannot exercise any remedies against Seller for this reason. Each of the parties shall, however, be entitled, without any liability, to cancel the agreement if the delay exceeds three months. If a delay in delivery is due to Seller being in a situation as stated in Clause 15 (exemption from liability), the time of delivery shall be postponed by the time of duration of the obstacle. However, both parties shall, without any liability, be entitled to cancel the agreement if the obstacle has lasted for more than 3 months. The present provision shall apply whether or not the cause of delay occurs before or after the expiry of the agreed delivery time. In the above case, Seller shall notify Buyer of the change in delivery time without undue delay. 11. Packaging Packaging shall be on Buyer s account unless it is expressly stated that this has been included in the price. Packaging may only be returned in accordance with a separate agreement. 12. Cancellation In connection with cancellation of deliveries, Buyer shall be under an obligation to pay full compensation, including for loss of profit, and gene rally to indemnify Seller for all costs incurred in connection with the cancellation. 13. Product changes Seller reserves the right to make changes to agreed specifications without notice if this can be done witout any inconvenience to the Buyer. 14. Defects and Complaints Upon delivery, Buyer shall iediately perform such inspection of the goods sold as generally accepted business practice requires. Any defects in the goods sold will, within a reasonable period of time, be remedied or a replacement delivery will be made at Seller s discretion. If such remedial action is not taken or a replacement delivery is not made within a reasonable period of time, Buyer shall be entitled to termina te the agreement, require a reduction in the purchase price or claim damages pursuant to with the general rules of Danish law and the present Terms of Sale and Delivery. If Buyer wants to claim a defect, Buyer shall notify Seller hereof in writing iediately after the defect has been or should have been discovered and specify the nature of the defect in the written notification. Samples of a sufficient quantity for a certain assessment of the justification of the complaints must be enclosed with complaints about the quality of the goods. If Buyer has discovered or should have discovered the defect, and he does not submit a complaint in accordance with the above, he cannot subsequently make a claim about the defect. If Buyer has not made a claim about the defect to Seller within 6 months from the date of delivery, he cannot subsequently claim any such defect. If remedial action has been taken or a replacement delivery has been made, Seller s liability for defects cannot be extended to more than 1 year from the original date of delivery. 15. Limitation of Liability A claim for damages against Seller cannot exceed the invoice amount for the product sold. Seller shall not be liable for any consequential loss, loss of profit or any other indirect loss which follows from the agreement, including any indirect loss which has incurred as a result of delay or defe cts in the goods sold. The following circumstances shall result in exemption of liability for Seller if they prevent performance of the agreement or make the performance of the agreement unnecessarily onerous. Industrial disputes and any other circumstances beyond the control of the parties such as fire, war, mobilisation or unforeseen military call-ups of an equivalent extent, requisitioning, sequestration, exchange controls, riots and civil unrest, shortage of transport possibilities, general scarcity of goods, fuel restrictions and defects in or delays in deliveries from sub-suppliers which are due to any of the circumstances set out in the present Clause. Circumstances like those set out above which occured before the quotation was given/the agreement was entered into shall only entail exemption of liability if their effect on the performance of the agreement could not have beeen foreseen at the time in question. Seller shall be under an obligation to notify Buyer in writing without undue delay should any such circumstances occur. 16. Product Liability Seller shall only be liable for personal injury if it is proved that the injury was suffered as a result of errors or omissions on the part of Seller or other parties for whom, Seller is responsible. Seller shall not be liable for any damage to real property or movable property. Seller shall not be liable for any consequential loss, loss of earnings or any other indirect loss. To the extent to which Seller may incur product liability vis-à-vis a third party, Buyer shall be under an obligation to indemnify Seller to the same extent as Seller s liability is limited in accordance with the above three sentences. If a third party makes a claim against one of the parties for liability for damages in accordance with the present Clause the party in question shall iediately notify the other party. Seller and Buyer shall be under a mutual obligation to accept that legal proceedings are instituted against them at the court which hears claims for damages brought against one of them on the basis of damage or injury allegedly caused by the delivery. These limitations to Seller s liability shall not apply if he has shown gross negligence. 17. Returns Returns will only be accepted in accordance with a special agreement on this with Seller. Unless otherwise agreed, crediting of returns shall be subject to the returns being undamaged and as for works/factory-packaged materials that they are in original, unbroken packaging. 18. Disputes Any disputes arising between the parties shall be settled by the courts in Denmark pursuant to Danish law. 71

72 Alumeco A/S Naesbyvej 26 DK-5000 Odense C Tlf Fax @alumeco.dk Reservations are taken for printing errors. Photos : Alumeco A/S