P14 Capacitive Humidity Sensor Optimal for various humidity applications
|
|
|
- Daniela Barker
- 7 years ago
- Views:
Transcription
1 P14 Optimal for various humidity applications Benefits & Characteristics High chemical resistance Very low drift Wide temperature range High humidity stability Resistance to condensation Customer specific sensor available upon request Fast recovery time Illustration Technical Data Wired SMD Dimensions (L x W x H in mm): 5 x 3.81 x x 2.54 x 0.38 Capacitance (C 30 ):* 150 pf +/- 50 pf (at 30 % RH and 23 C) 180 pf +/- 50 pf (at 30 % RH and 23 C) Sensitivity (at C 30 = 150 pf/ 180 pf): 0.25 pf / % RH (15 % RH to 90 % RH) 0.3 pf / % RH (15 % RH to 90 % RH) Operating humidity range: Operating temperature range: -50 C to +150 C Loss factor: Linearity error: Hysteresis: Response time t 63 : 0 % RH to 100 % RH (max. dew point 85 C) < 0.01 (at 23 C, at 10 khz, at 90 % RH) < 1.5 % RH (15 % RH to 90 % RH at 23 C after one point calibration) < 1.5 % RH < 5 s (50 % RH to 0 % RH at 23 C) Temperature dependence (typical): % RH = (B1 x % RH + B2) x T [ C] + (B3 x % RH + B4) Measurement frequency: Max. supply voltage: Signal form: Contacts:* B1 = [1/ C] B3 = khz to 100 khz (recommended 10 khz) < 12 V pp AC alternating signal without DC bias CuP-SIL wire post-plated with Sn, 10 mm or Au/Cu-wire, Ø 0.4 mm B2 = [% RH/ C] B4 = [% RH] SMD, automatic assembly compatible * Customer specific alternatives available 1/2
2 P14 Optimal for various humidity applications The calibration of the sensor must be done 5 days after soldering at the earliest. Order Information - SIL (CuP-SIL wire post-plated with Sn, 10 mm) Order code P14 (150pF +/- 50pF) Order Information - SMD Order code P14 SMD-G (180pF +/- 50pF) Order Information - Au/Cu-wire, Ø 0.4 mm Order code P14 (150pF +/- 40pF) DHP14-W_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 2/2 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved
3 P14 2FW Thermo Optimal for dew point applications Benefits & Characteristics Heating of humidity sensor (humidity sensor and heater on one chip) Fast recovery time Temperature measurement on-chip Very low drift Wide temperature range High humidity stability Condensation resistant Customer specific sensor available upon request High chemical resistance Illustration Technical Data Dimensions (L x W x H in mm): 5.0 x 3.8 x 0.8 Operating humidity range: 0 % RH to 100 % RH (max. dew point 85 C) Operating temperature range: -50 C to +150 C Heater/temperature sensor:* Pt100 Heater/temperature sensor accuracy: DIN EN F0.3 (class B) Capacitance (C 30 ):* 150 pf +/- 50 pf (at 30 % RH and 23 C) Sensitivity (at C 30 = 150 pf): 0.25 pf / % RH (15 % RH to 90 % RH) Loss factor: < 0.01 (at 23 C, at 10 khz, at 90 % RH) Linearity error: < 1.5 % RH (15 % RH to 90 % RH at 23 C after one point calibration) Hysteresis: < 1.5 % RH Response time t 63 : < 6 s (50 % RH to 0 % RH at 23 C) Temperature dependence (typical): % RH = (B1 x % RH + B2) x T [ C] + (B3 x % RH + B4) B1 = [1/ C] B2 = [% RH/ C] B3 = B4 = [% RH] Measurement frequency: 1 khz to 100 khz (recommended 10 khz) Max. supply voltage: < 12 V pp AC Signal form: alternating signal without DC bias Wire:* Ni-flat wire Au coated * Customer specific alternatives available 1/2
4 P14 2FW Thermo Optimal for dew point applications The calibration of the sensor must be done 5 days after soldering at the earliest. Order Information - Ni-flat wire Au coated Nominal resistance: 100 Ohm at 0 C Order code P14 2FW Thermo (P0K1) DHP14 2FW Thermo_E2.0-W_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 2/2 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved
5 MK33 Optimal for oil measurement applications Benefits & Characteristics High chemical resistance Very low drift Wide temperature range High humidity stability Condensation resistant Suitable for extreme environments Fast recovery time Customer specific sensor available upon request Illustration Technical Data Dimensions (L x W x H in mm): 10.8 x 3.81 x 0.4 Operating humidity range: 0 % RH to 100 % RH (max. dew point 95 C) Operating temperature range: -40 C to +190 C Capacitance (C 30 ):* 300 pf +/- 40 pf (at 30 % RH and 23 C) Sensitivity (at C 30 = 300 pf): 0.45 pf / % RH (15 % RH to 90 % RH) Loss factor: < 0.01 (at 23 C, at 10 khz, at 90 % RH) Linearity error: < 2 % RH (15 % RH to 90 % RH at 23 C after one point calibration) Hysteresis: < 2 % RH Response time t 63 : < 6 s (50 % RH to 0 % RH at 23 C) Temperature dependence (typical): % RH = (B1 x % RH + B2) x T [ C] + (B3 x % RH + B4) B1 = [1/ C] B2 = [% RH/ C] B3 = B4 = [% RH] Measurement frequency: 1 khz to 100 khz (recommended 10 khz) Max. supply voltage: < 12 V pp AC Signal form: alternating signal without DC bias Wire:* CuP-SIL wire post-plated with Sn, 10 mm or Au/Cu-wire, Ø 0.4 mm * Customer specific alternatives available The calibration of the sensor must be done 5 days after soldering at the earliest. 1/2
6 MK33 Optimal for oil measurement applications Order Information - SIL (CuP-SIL wire post-plated with Sn, 10 mm) Order code MK33 (300pF +/- 40pF) Order Information - Au/Cu-wire, Ø 0.4 mm Order code MK33-W (300pF +/- 40pF) DHMK33-W_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 2/2 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved
7 P14 Rapid Optimal for weather balloons and radio sondes Benefits & Characteristics Ultra fast response time Temperature shock resistant Condensation resistant Fast recovery time High humidity stability Customer specific sensor available upon request Wide temperature range Illustration Technical Data Wired SMD Dimensions (L x W x H in mm): 5 x 3.81 x x 2.54 x 0.4 Capacitance (C 30 ):* 140 pf +/- 40 pf (at 30 % RH and 23 C) 180 pf +/- 50 pf (at 30 % RH and 23 C) Sensitivity (at C 30 = 150 pf/ 180 pf): 0.25 pf / % RH (15 % RH to 90 % RH) 0.3 pf / % RH (15 % RH to 90 % RH) Operating humidity range: 0 % RH to 100 % RH (max. dew point 85 C) Operating temperature range: -80 C to +150 C Loss factor: < 0.01 (at 23 C, at 10 khz, at 90 % RH) Linearity error: < 1.5 % RH (15 % RH to 90 % RH at 23 C after one point calibration) Hysteresis: < 1.5 % RH Response time t 63 : 1) < 1.5 s (50 % RH to 0 % RH at 23 C) Temperature dependence (typical): % RH = (B1 x % RH + B2) x T [ C] + (B3 x % RH + B4) Measurement frequency: Max. supply voltage: Signal form: Contacts:* B1 = [1/ C] B3 = khz to 100 khz (recommended 10 khz) < 12 V pp AC alternating signal without DC bias B2 = [% RH/ C] B4 = [% RH] CuP-SIL wire post-plated with Sn, 10 mm or Au/Cu wire, Ø 0.4 mm or SMD automatic assembly compatible 1/2
8 P14 Rapid Optimal for weather balloons and radio sondes * Customer specific alternatives available The calibration of the sensor must be done 5 days after soldering at the earliest. 1) The response time is often measured for increasing humidity steps, whereas physics predicts that decreasing humidity leads to generally far longer response times for capacitive humidity sensors. IST thus measures response times always for decreasing humidity values, since this is the worst case. Order Information - SIL (CuP-SIL wire post-plated with Sn, 10 mm) Order code P14 Rapid (140 +/- 40pF) Order Information - SMD Order code P14 SMD Rapid-G (180 +/- 50pF) Order Information - Au/Cu-Draht, Ø 0.4 mm Order code P14 Rapid-W (140 +/- 40pF) DHP14-Rapid_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 2/2 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved
9 K5 Optimal for low humidity measurement Benefits & Characteristics Very stable at low humidity Condensation resistant High chemical resistance Very low drift Wide temperature range Customer specific sensor available upon request Condensation resistant Illustration Technical Data Dimensions (L x W x H in mm): 5 x 3.81 x 0.4 Operating humidity range: 0 % RH to 100 % RH Operating temperature range: -40 C to +150 C Capacitance (C 30 ):* 200 pf +/- 50 pf (at 30 % RH and 23 C) Sensitivity (at C 30 = 200 pf): 0.4 pf / % RH (15 % RH to 90 % RH) Loss factor: < 0.01 (at 23 C, at 10 khz, at 90 % RH) Linearity error: < 1.5 % RH (15 % RH to 90 % RH at 23 C after one point calibration) Hysteresis: < 1.5 % RH Response time t 63 : < 5 s (50 % RH to 0 % RH at 23 C) Temperature dependence (typical): % RH = (B1 x % RH + B2) x T [ C] + (B3 x % RH + B4) B1 = [1/ C] B2 = [% RH/ C] B3 = B4 = [% RH] Measurement frequency: 1 khz to 100 khz (recommended 10 khz) Max. supply voltage: < 12 V pp AC Signal form: alternating signal without DC bias Wire:* CuP-SIL wire post-plated with Sn, 10 mm * Customer specific alternatives available The calibration of the sensor must be done 5 days after soldering at the earliest. 1/2
10 K5 Optimal for low humidity measurement Order Information - SIL (CuP-SIL wire post-plated with Sn, 10 mm) K5 (200pF +/- 50pF) Order code DHK5-W_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 2/2 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved
AAV003-10E Current Sensor
Datasheet AAV003-10E Current Sensor Key Features For Low Current Detection On-Chip Current Strap for Precise Operation 80 ma to +80 ma Linear Range Sensitivity up to 2 mv/ma AC or DC Measurement Ultraminiature
Capteur température et humidité pour HVAC
Capteur température et humidité pour HVAC oct-13 Type R 590 Type R 591 Cable Pvc / Pvc Cable Silicone / Silicone Sonde de température Pt100, Pt1000, Ni1000, KTY, NTC, autres sur demande Classe B ou A Raccordement
PS25202 EPIC Ultra High Impedance ECG Sensor Advance Information
EPIC Ultra High Impedance ECG Sensor Advance Information Data Sheet 291498 issue 2 FEATURES Ultra high input resistance, typically 20GΩ. Dry-contact capacitive coupling. Input capacitance as low as 15pF.
HIH-4000 Series Humidity Sensors
HIH-4000 Series Humidity Sensors DESCRIPTION The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or
MILE Encoder for EC 90 flat
MILE Encoders Edition October 2014 MILE Encoder for EC 90 flat Encoders Document ID: 1 495 818-06 ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
Problem / Solution. The problem:
Problem / Solution Solar Photovoltaic (PV) technology has shown significant development in recent years and this has led to many UK homeowners investing in Solar PV installations. Solar electricity is
humidity sensors Line Guide FEATURES Honeywell HumidIcon Digital Humidity/Temperature Sensors HIH7000 Series, HIH8000 Series
Humidity Sensors Line Guide Performance and reliability. At Honeywell Sensing and Productivity Solutions (S&PS), each sensor is designed to provide enhanced stability, reliability and sensitivity. Digital
DHT11 Humidity & Temperature Sensor D-Robotics UK (www.droboticsonline.com)
DHT11 Humidity & Temperature Sensor D-Robotics UK (www.droboticsonline.com) DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output.
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
EVERLIGHT ELECTRONICS CO., LTD.
ECN : PAGE : 1/7 Features : Fast response time High photo sensitivity Small junction capacitance High reliability Description : is a high speed silicon NPN epitaxial planar phototransistor in a compact
WE-LF SMD Common Mode Power Line Choke
A Dimensions: [mm] B Recommended hole pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 khz/ 0.1 ma L 2x 6.8 mh ±30% Rated current @ 70 C I R 1.0 A max. DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
Rosemount 333 HART Tri-Loop
Product Data Sheet September 2014 00813-0100-4754, Rev GA Rosemount 333 HART Tri-Loop HART-to-Analog Signal Converter Convert a digital HART signal into three additional analog signals Easy to configure
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
HM1500LF Relative Humidity Module
Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage supply from 4.75Vdc
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
Duct Humidity Transmitter
SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers
TS321 Low Power Single Operational Amplifier
SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed
Hardware Documentation. Data Sheet HAL 202. Hall-Effect Sensor. Edition Sept. 18, 2014 DSH000159_002EN
Hardware Documentation Data Sheet HAL 202 Hall-Effect Sensor Edition Sept. 18, 2014 DSH000159_002EN HAL202 Copyright, Warranty, and Limitation of Liability The information and data contained in this document
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Technical Note Series
Technical Note Series SKIN CONDUCTANCE SENSOR (SA9309M) S TN0 0 0 8-0 0 S k i n C o n d u c t a n c e S e n s o r Page 2 IMPORTANT OPERATION INFORMATION WARNING Type BF Equipment Internally powered equipment
WCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
SINEAX U553 Transducer for AC Voltage
With power supply RMS value measurement Carrying rail housing P/0 Application he transducer SINEAX U55 (Fig. ) converts a sinusoidal or a distorted AC voltage into a load independent DC current or a load
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
Sensing element Polymer humidity capacitor Operating range humidity 0-100%RH; temperature -40~80Celsius Accuracy
Standard AM2302/DHT22 AM2302/DHT22 with big case and wires Digital relative humidity & temperature sensor AM2302/DHT22 1. Feature & Application: *High precision *Capacitive type *Full range temperature
T5 Watt-Miser Linear Fluorescent lamps
GE Lighting T5 Watt-Miser Linear Fluorescent lamps DATA SHEET T5 Watt-Miser High Efficiency 13W, 20W, 26W, 33W T5 Watt-Miser High Output 21W, 36W, 46W, 51W, 76W Product information T5 Watt-Miser lamps
PART 1 - INTRODUCTION...
Table of Contents PART 1 - INTRODUCTION... 3 1.1 General... 3 1.2 Sensor Features... 3 1.3 Sensor Specifications (CDE-45P)... 4 Figure 1-1 CDE-45P Sensor Dimensions (standard, convertible style)... 4 PART
LM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
VT-802 Temperature Compensated Crystal Oscillator
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
TSic 101/106/201/206/301/306/506 Rapid Response, Low-Cost Temperature Sensor IC with Analog or digital Output Voltage
with Analog or digital Output Voltage / Brief Description The TSic temperature sensor IC family are fully tested and calibrated sensors with absolute measurement accuracy on delivery, no further calibration
RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
Relative Humidity Sensors, Transmitters and Calibration Products Relative Humidity Measurement and Calibration
Relative Humidity Measurement and Calibration The widest range of humidity products from a pioneer of RH sensor development The best in Relative Humidity technology to optimize your process Whether you
DUAL%CHANNEL BROADBAND%LINEAR%AMPLIFIER Model&A800D
ELECTRONICS AB DUAL%CHANNEL BROADBAND%LINEAR%AMPLIFIER Model&A800D & HIGH&VOLTAGE& FIXED&GAIN& BROADBAND & 800Vpp&60mA& 100x& DC&to&ca&200&kHz & LOW&OUTPUT&IMPEDANCE& HIGH&SLEW&RATE &
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
Data Sheet, V1.1, May 2008 SMM310. Silicon MEMS Microphone. Small Signal Discretes
Data Sheet, V1.1, May 2008 SMM310 Small Signal Discretes Edition 2008-05-28 Published by Infineon Technologies AG 81726 München, Germany Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer
EFC 3600. Frequency converters
2 Bosch Rexroth AG Electric Drives and Controls Documentation Compact and complete: space saving side-by-side assembly, plug-in I/O terminals, with brake chopper and mains filter for ultra-simple installation
Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
U-shaped Micro Photoelectric Sensor
SERIES U-shaped Micro Photoelectric Extremely small size enables space saving and quick installation! Extremely small Ultra-small type PM- 24(-R) contributes to the miniaturization of your equipment. Even
Environment-Laboratory Ambient Conditions
ISSUE 3.0: MADE MINOR CLARIFICATION CHANGES. FOR CLIENT LABS Purpose To assure laboratory conditions are stable during the performance of testing and data collection. Why this requirement is important?
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
Rosemount 333 HART Tri-Loop
Product Data Sheet Rosemount 333 Rosemount 333 HART Tri-Loop HART-TO-ANALOG SIGNAL CONVERTER Convert a digital HART signal into three additional analog signals Easy to configure and install Accessory product
Specification of 5 Wire Analog Touch Panel
Specification of 5 Wire Analog Touch Panel 5 WIRE ANALOG RESISTIVE TOUCH PANEL A. Application This specification applies to the 5 Wire Analog Resistive Touch Panel. B. Environmental Conditions 1. Operating
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
ABB i-bus EIB / KNX Analogue Input AE/S 4.2
Product Manual ABB i-bus EIB / KNX Analogue Input AE/S 4.2 Intelligent Installation Systems This manual describes the functionality of Analogue Input AE/S 4.2. Subject to changes and errors excepted. Exclusion
EBS852 (Contrac) Power Electronic Unit
Data Sheet Rev. A EBS852 (Contrac) Power Electronic Unit For continuous control of Contrac actuators RHD(E) and RSD(E) Microprocessor-controlled power electronic unit with integrated frequency converter
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
Fire & Security DETECTORS
Fire & Security DETECTORS Smoke Sensitivity 0.98 ~.0%/ft Obscuration Ceiling Spacing 50 foot rating for heat sensor Temperature Range 10ºC to 50ºC Humidity 0 to 95% RH, no condensation or icing Dimensions
How is Dew Point Measured Reliably?
How is Dew Point Measured Reliably? Air compression increases vapor pressure and thus dew point. = water vapor Vapor pressure Frost point Saturation - 0 C + Dew point Monitoring with alarming and real
Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
Using Thermocouple Sensors Connecting Grounded and Floating Thermocouples
Connecting Grounded and Floating Thermocouples For best performance, Thermocouple sensors should be floating. This will ensure that no noise currents can flow in the sensor leads and that no common-mode
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
Fixed Resistors. RESISTORS FOR MEDICAL APPLICATIONS - Application Note
The electronic content of devices for medical applications continues to rise steadily as medical science develops new techniques and electronic engineering supplies new solutions. At the same time, these
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.
Application : The transducer RISH CON - CA/CV (Fig.1) converts a sinusoidal AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value.
Meter Relays. 077 Series Analogue Meter Relays. Features. Applications
077 Series Analogue Features Monitors and controls any variable which can be converted to an A.C. or D.C. signal. Rugged, shock and vibration resistant design Indicator, relays and power unit in one housing
SUCCESS EPCOS Capacitors
SUCCESS EPCOS Inc. Capacitors Group April, 2012 EV / HV / E-Mobility Battery charger system & Inverter On Board and Off Board Assembly Trend: Wireless Charging DC/DC Converter Filtering DC Link E-Mobility
SX460. Generator Automatic Voltage Regulator Operation Manual
SX460 Generator Automatic Voltage Regulator Operation Manual Self Excited Automatic Voltage Regulator Compatible with Newage SX460* * Use for reference purpose only and not a genuine Newage product. 1.
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
HTM2500LF Temperature and Relative Humidity Module
Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOhms +/-1% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc DESCRIPTION
DUST EMISSION MONITORING SYSTEM
Applications Measurement of dust concentration in dry or moist, steamsaturated and corrosive stack gases Monitoring of municipal and hazardous waste and sewage sludge incinerators Monitoring of power plants
Temp. & humidity Transmitter Instructions
Temp. & humidity Transmitter Instructions AQ3485/AQ3485Y www.aosong.com 1 Product Overview AQ3485/ AQ3485Y outdoor network temperature and humidity transmitter is accurate measurement of relative humidity
I-PEX MHF4 Micro Coaxial Connector
PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
code Location code Customers Sites locations: 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Lim Tiong Thai Tel: +673-2-386475
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
RPS 8000. High Accuracy Resonant Pressure Sensor. GE Measurement & Control Solutions. Features:
GE Measurement & Control Solutions RPS 8000 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in
Model: DC-A2IO Advanced HVAC Controller
Model: DC-A2IO Advanced HVAC Controller Job Name: Schedule Reference: Date: DC-A2IO Advanced HVAC Controller Package PAC-IF01 M-Net Adapter AL2-14MR-D α2 Simple Application Controller Accessories AL2-2DA
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
WE-PD SMD Shielded Power Inductor
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 khz/ 250 mv L 100 µh ±20% Rated current T = 40 K I R 2.5 A max. Saturation
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max
1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96
B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.
![B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.](/thumbs/17/124841.jpg "B Recommended land pattern: [mm] SSt. SSt 2014-07-15 2014-05-12. SSt. SSt. SSt 2014-01-07. SSt 2013-11-19. SSt. SBa. SSt 2013-04-24.")
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 khz/ 100 mv L 2x 51 µh ±30% Impedance Z max 5500 Ω typ. Rated current
1.0A LOW DROPOUT LINEAR REGULATOR
1.0A LOW DROPOUT LINEAR REGULATOR Description Pin Assignments The is a low dropout three-terminal regulator with 1.0A output current ability, and the dropout voltage is specified at typical 1.1V at 1.0A
SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
Automation System TROVIS 6400 TROVIS 6493 Compact Controller
Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
HEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR
HEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR 2 MB 103 TRANSFORMER TEMPERATURE CONTROL UNIT WITH CONTROL SIGNAL Recent approval of new
T0118 T2118 T3118. Instruction Manual
Programmable indoor transmitter of temperature T0118 Programmable indoor transmitter of atmospheric pressure T2118 Programmable indoor transmitter of temperature, relative humidity and other derived humidity
FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
Digital-output relative humidity & temperature sensor/module DHT22 (DHT22 also named as AM2302)
Digital-output relative humidity & temperature sensor/module DHT22 (DHT22 also named as AM2302) Capacitive-type humidity and temperature module/sensor 1 1. Feature & Application: * Full range temperature
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.