Special modifications available: - lengths - finish/colors/plating/anodizing

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Special modifications available: - lengths - finish/colors/plating/anodizing"

Transcription

1 Search Tube,,, Tubing Tube connection components function like industrial Tinker Toys, and can be combined with round or square tubing to build jigs, fixtures, and operating systems. We offer a vast array of these tube clamp fittings in aluminum or stainless steel, in many configurations. Our connector clamps are available in two-way, split and multi-part assembly, flanged, base plate, and T- angle designs. We also offer a special, unique line of mini-clamps in small sizes, typically used to build support structures for mounting sensor, Plexiglas guards, etc. We offer tubing in round and square configurations, in aluminum, steel and stainless steel. Tubing can also be supported by tube supports, joints and connectors. Motion can be incorporated into the construction using swivel clamp bases, connectors, and joints. Another essential part of these constructions is linear actuators. These components allow for linear motion using a slider system built into a rod that incorporates threaded shafts. Along with the actuators themselves, we offer connector clamps, connectors, and base plates in a number of designs, scales, drive/transfer units, bevel-gear wheels and gear housings, as well as handwheels and digital position indicators. Special modifications available: - lengths - finish/colors/plating/anodizing Tube clamps, connector clamps and tubing are also referred to as: tube clamp fittings, railing clamps, square tubing clamps, round tubing clamps, guard frame clamps, cross clamps, tube connectors, and tubing connectors Download a printable pdf of this section index page More about our machining and packaging capacities Read posts about tube clamping components on the J.W. Winco blog In This Section: Mini- Bases, s and Linear s Tubing Split s Tube End Plugs and Kits Handwheels for Linear s Split & Multi-Part Assembly Linear s Linear Two-way Digital Position Indicators Drive /, Gear Wheels & Gear Housings Linear s Panel Support Linear s Profile Connecting Components Tube Supports, and s Linear s Mini- GN 473 Two- Way Base Mini- GN 474 Two- Way Mini- GN 475 Two- Way Mini- GN 476 Two- Way T- Mini- GN 477 Mini- Mounting Blocks GN 478 Mini- for Sensor Brackets GN 480 Steel Mini Mounting Bolts GN 482 GN 483 T- GN 484 Attachment GN 490 Two- Way ing GN 511 Zinc Die-Cast Kits for Mini- GN Kits for Swivel GN 479 Sensor Brackets GN Stainless Steel Plain L-Shaped Mounting Brackets Tubing GN Solid Round Shafting, and Hollow Round and Square Tubing GN 990-AL Size, Round and Square Metric Size GN 990-ST, Round and Square Steel GN 990-NI, Round and Square

2 GN 131 Size GN 131-NI GN 132 Size GN GN 133 Two- Way Bore Split and Multi-Part Assembly GN 134 Split Assembly Two- Way GN 141 Multi- Part Assembly, or Square GN 145 Size GN 145-NI GN 146 Size GN GN Inch and with Four Mounting Holes GN with Two Mounting Holes GN 147 Split- Assembly or Square GN 162 Size GN 162-NI GN Base Plate GN NI GN 163 Base Plate Bore GN GN 165 Split- Assembly Base Plate or Square GN 166 Off- Set GN 167 Split Assembly, Wide or Square GN 171 Split Assembly,, GN 191 Size GN 191-NI T- Angle GN 192 Size GN T- Angle GN 193 Split Assembly,, GN 194 Multi- Part Assembly, GN 195 Multi- Part Assembly, T- Angle or Square Tube Supports, and s

3 GN 231 Split Assembly, Tube Supports, Round GN 241 Tube, Round GN 242 Tube s Bases, s and GN 271 Bases GN 272 Swivel Bases GN 273 s, Round GN 274 Swivel s, Round GN 275 Swivel s, Round GN 276 s, GN 277 Swivel s, Round GN 278 s, Round GN 279 Split Assembly Swivel s, Round GN 281 Swivel, GN 282, GN 283 Swivel, Round GN 284, Round GN 285 Swivel, Round GN 286 Swivel, GN 287, GN 288 Swivel, Round GN 289 Split Assembly Swivel GN GN Sensor Holders GN Tube End Plugs and Kits WN 991 Inch Size Plastic Tube End Plugs GN 991 Plastic Tube End Plugs GN 911 Zinc Die-Cast and Kits Linear s GN 291 Steel Linear s with Left or GN 291-NI Linear s with Left or Right Hand GN 292 Steel Linear s with Left and GN 292-NI Linear s with Left and GN 293 Steel Linear s with Two Separate ed Shafts GN 293-NI Linear s with Two Separate ed Shafts GN Steel Square Linear s with Left or Right Hand GN 296 Installation Kits for Position Indicators Used on GN Square Linear s GN 491 Steel Double Tube Linear s with, Single Slider GN 492 Steel Double Tube Linear s with Right Hand, Double Slider Linear Two-way GN Linear for Single System GN NI Linear for Single System GN Linear Two- Way for Two- GN NI Linear for Two- GN Linear for Single System

4 GN Linear for Two- GN Linear s GN NI Linear s GN Linear s Linear s GN Base Plate Linear s GN NI Linear s GN Base Plate Linear s Linear s GN T- s GN NI T- s GN T- s Linear s GN Linear s GN Swivel Linear s Split s GN Split s GN Split s GN Split s Handwheels for Linear s GN / GN / GN Size Flat-Faced Solid Disk Handwheels for Linear s / GN / GN GN Size Flat-Faced Spoked Handwheels for Linear s / Digital Position Indicators EN 953 Plastic Digital Position Indicators EN 954 Plastic Digital Position Indicators Drive /, Gear Wheels and Gear Housings GN 295 Installation Kits for Position Indicators Used GN 297 Bevel Gear Wheels for Linear s / GN 299 Longitudinal Scales for Linear GN 391 Steel Drive / Transfer GN 391-NI Stainless Steel Drive /

5 on Linear s with Angular Gears s Units GN 298 Housings for Angular / T- Gears Panel Support EN 649 Panel Support Profile Connecting Components GN 960 for 30/40/45 mm GN 961 Angle Brackets for 30/40 mm GN 963 Cover Caps for for GN 967 Flat and L-Shaped Connecting Brackets for Profile Systems EN 561 Technopolymer Plastic Mounting GN 965 Steel T-Nut Assemblies for 30/40 mm Metric Size T-Slot Profile Systems GN 965 Info Sheet List of our standard components used with GN 965 and 30/40 mm Profile systems GN 968 Steel T-Nut Assemblies for 30/40/50 mm T-Slot GN 968 Info Sheet List of our standard components used with GN 968 and 30/40/45 mm profile systems GN Steel Serrated T-Slot Bolts GN Serrated T-Slot Bolts GN 505 Serrated Quarter- Turn T-Nuts for Extrusions GN 506 Steel Roll-in T-Nuts GN Steel T- Nuts without Guide Step GN T- Nuts without Guide Step GN Steel T-Nuts with Spring Washer GN 507 Steel T-Nuts for Metric Size Extrusions J.W. Winco, Inc Terms and Conditions Privacy / Disclaimer ISO 9001: Page updated 03/23/2016

ANTENNA PARTS CATALOG

ANTENNA PARTS CATALOG ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine

More information

Installation Instructions Kit, Base Rail Bracket Part # 31404

Installation Instructions Kit, Base Rail Bracket Part # 31404 Installation Instructions Kit, Base Rail Bracket Part # 31404 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions. provide important operating and

More information

Solar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels

Solar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels For Panels Over 100 Watts Including CMP Panels Thank you for purchasing the top-of-pole solar panel mounting kit. This mounting system is designed to enable the solar panel to be easily rotated and tilted

More information

Trailer Parts. Jockey Wheels. Tow Balls. Couplings. Jockey Wheel Parts. Coupling Locks

Trailer Parts. Jockey Wheels. Tow Balls. Couplings. Jockey Wheel Parts. Coupling Locks Trailer Parts Tow Balls 7115 1 7/8 Machined 7116 50mm Machined 7117 Long Shank 7116A Black Plastic Cover 7116B Chrome Plated Plastic Cover Jockey Wheels 7301 Telescopic 6 clamp 7302 Swivel 6 solid wheel

More information

NuStep TRS 4000 Parts List 1.6

NuStep TRS 4000 Parts List 1.6 NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

DYNA RIDER FOOTBOARD KIT

DYNA RIDER FOOTBOARD KIT -J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

Fixturing systems Fixturing systems for measurement technology

Fixturing systems Fixturing systems for measurement technology Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.

More information

INSTALLATION INSTRUCTIONS 65-72 F-100 4-Link Rear End

INSTALLATION INSTRUCTIONS 65-72 F-100 4-Link Rear End INSTALLATION INSTRUCTIONS 65-72 F-100 4-Link Rear End Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating to ensure proper

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,

More information

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application 2007 SUSPENSION Rear Suspension - H3 SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Leaf Spring to Front Bracket Nut 125 N.m

More information

X-axis Nut-rotation Type Cartesian Robot Assembly Procedures First Edition

X-axis Nut-rotation Type Cartesian Robot Assembly Procedures First Edition X-axis Nut-rotation Type Cartesian Robot Assembly Procedures First Edition Thank you for purchasing an IAI product. Assemble your product correctly by referring to this Assembly Procedures. No. NS (nut-rotation

More information

The baying system PS 4000

The baying system PS 4000 The baying system PS 000 The baying system PS 000 Design and technology customised to meet your needs Top quality and economy characterise the PS system. The profile is one of the core features of our

More information

METAL-TURNING LATHE Built from Stock Parts

METAL-TURNING LATHE Built from Stock Parts by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order

More information

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

TSLOTS Hardware 06:02

TSLOTS Hardware 06:02 06 TSLOTS HARDWARE This section includes everything you need to build panels and doors for guarding, bi-fold doors, sliding doors or enclosures. If you need something to complete a project and we don't

More information

PORTABLE LIFEGUARD STAND

PORTABLE LIFEGUARD STAND PORTABLE LIFEGUARD STAND ASSEMBLY INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334 www.srsmith.com

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

1500 Follow Spot Yoke

1500 Follow Spot Yoke = 1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical

More information

Fittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS

Fittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107

More information

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No.

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No. Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 1 480mm Deluxe sliding jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs 1 5 min 790mm max Deluxe

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Series 30000 Hose Reels

Series 30000 Hose Reels Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are

More information

Things you need to assemble the tube actuator. Left to right. are small piece of masking tape, super glue,pen knife and small

Things you need to assemble the tube actuator. Left to right. are small piece of masking tape, super glue,pen knife and small Things you need to assemble the tube actuator. Left to right are small piece of masking tape, super glue,pen knife and small crosspoint screwdriver. You will also need a few drops of light oil. Begin by

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These

More information

DryLin ZLW Belt Drive

DryLin ZLW Belt Drive Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having

More information

Library Ladder Assembly Instructions

Library Ladder Assembly Instructions Library Ladder Assembly Instructions Congratulations on your purchase of the Library Ladder Hardware Kit! These instructions will guide you through the process of building a -step (8 foot) ladder. Familiarity

More information

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 1 of 20 42 Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 2 of 20 42 Inch Deck 1 16606 1 S Bracket: Retainer Hook 2 618-0565 1 S Spindle Assembly: Pulley

More information

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating to ensure proper

More information

alu center ring and brake rotor one alu center ring on both sides install brake rotors with 5/16 unc bolts

alu center ring and brake rotor one alu center ring on both sides install brake rotors with 5/16 unc bolts Mounting instructions for v-rod wide tire conversion using Eurocomponents wheels ------------------------------------------------------------------------------------------------------------------------------------------------

More information

mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles

mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles

More information

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455 HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

DOOR PARTS SECTION D-1

DOOR PARTS SECTION D-1 DOOR PARTS SECTION D-1 1 11 10 11 9 8 1 1 7 6 10 5 4 D- DOOR ASSEMBLY ITEM NO DESCRIPTION QTY. PART NO 1 SERVICE DOOR ASSEMBLY ~ * CONTROL PANEL 1 * DOOR GUARD 1 * 4 DOOR ROLLER ASSEMBLY 1 1148-7 5 T-HANDLE

More information

SERVICE MANUAL- M132 REVA MODEL 395 ELECTRIC KNIFE SHARPENER

SERVICE MANUAL- M132 REVA MODEL 395 ELECTRIC KNIFE SHARPENER SERVICE MANUAL- M132 REVA MODEL 395 ELECTRIC KNIFE SHARPENER Assembly Procedure The Model 395 knife sharpener is assembled according to the following procedure. Assembly of Base Assembly (A527) Install

More information

1-Way Bracket Assemblies

1-Way Bracket Assemblies -Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES

INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY

More information

Inmate Security Transport Vehicle (ISTV) Bid Specifications

Inmate Security Transport Vehicle (ISTV) Bid Specifications Inmate Security Transport Vehicle (ISTV) Bid Specifications 1.0 INTRODUCTION This specification describes the caging requirements for a 12-Passenger Van (Make/Model: 2013 Chevrolet Express C2500) to be

More information

CABLEVIEW RAILING INSTRUCTIONS

CABLEVIEW RAILING INSTRUCTIONS CUSTOMER SERVICE CONTACT INFO Phone: 888-686-7245(RAIL) Fax: 888-686-7245 (RAIL) Email: sales@stainlesscablerailing.com Website: www.stainlesscablerailing.com Address: 3315 NE 112 th Ave #72/73, Vancouver,

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

and Mounting options NEW Additional Profiles HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system

and Mounting options NEW Additional Profiles HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system NEW Additional Profiles and Mounting options HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system MCS Machine Construction System and MFS Machine Fencing System

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 510-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS

FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 510-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS FLOE FLAG POLE ASSEMBLY INSTRUCTIONS KIT P/N 50-00200-00 FOR FLOATING, SECTIONAL, AND ROLL-IN DOCKS FLAG NOT INCLUDED. FOR INFORMATION ON USA FLAG ETIQUETTE REFER TO www.usflag.org FOR INFORMATION ON CANADA

More information

USED BUT NOT SHOWN: ITEMS 11-24.

USED BUT NOT SHOWN: ITEMS 11-24. FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3

More information

Mig C280 PRO, Mig C340 PRO. Spare parts list. Edition Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx,

Mig C280 PRO, Mig C340 PRO. Spare parts list. Edition Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx, Spare parts list Edition 20120710 Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx, Ordering no. Product 0349 302 889 Origo Mig C280 PRO 400-415 V, 3~50 Hz 0349 302 844 Origo Mig C280 PRO 230/400-415/415/500V,

More information

DIMENSIONAL BOLTING CATALOG

DIMENSIONAL BOLTING CATALOG DIMENSIONAL BOLTING CATALOG DIMENSIONAL CATALOG Table of Contents Page Screws Round Head Screws 1-1 Various Head Styles Machine Scerws 1-2 to 1-23 Tapping Screws (Approx. Hole Sizes) 1-24 Thumb and Wing

More information

KDT916 - Watts Link - Complete Assembly

KDT916 - Watts Link - Complete Assembly KDT916 - Watts Link - Complete Assembly Please read all instructions carefully prior to installation and verify all kit contents and tools are on hand prior to installation. Professional Installation by

More information

Programmable Robot Kit

Programmable Robot Kit Programmable Robot Kit Code: BCE 003A CONTENTS Connecting block 2 motorised gearboxes INTRODUCTION The Programmable Robot has a control system (called the IQ4 controller) which is easily programmed to

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

Knürr Smaract. Knürr Smaract. CompactRack

Knürr Smaract. Knürr Smaract. CompactRack CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.

More information

Guide rail components

Guide rail components Guide rail components Contents System information...289 Track width calculations...290 Examples...292 Configuration examples...293 Circular guide rails...295 Guide rails 10 mm...295 Guide rails 15 mm...296

More information

Our casters Institutional 1-13

Our casters Institutional 1-13 Our casters Institutional 1-13 1370 Series 1 1470 Series 2 2470 Series 3-4 2970 Twin Wheel Casters 5 2440 Series 6 5020 MONO Series 7 5070 GALEA Series 8 5320 ICS Series 9 5320 LEVINA Series - 075 mm 10

More information

Section #1 Pictorial Table Of Contents. Material Strength. 25-2503 Profile. Page 662. Page 663. Phone: 260-248-8030 Fax: 260-248-8029 www.8020.

Section #1 Pictorial Table Of Contents. Material Strength. 25-2503 Profile. Page 662. Page 663. Phone: 260-248-8030 Fax: 260-248-8029 www.8020. How To Order 20-2020 Profile Section # Pictorial Table Of Contents Metric Part Naming Metric Page 639 Page 64 Page 642 Page 643 Page 644 Page 645 Pages 646-649 20 Series T-Slotted Aluminum Profiles 20-2040

More information

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow

More information

T-Slotted Extrusions and Quick Frame

T-Slotted Extrusions and Quick Frame T-Slotted Extrusions and Quick Frame How to Order Introduction to Section 1 Material Specifications Material Strength Area of 80/20 T-Slotted Extrusions Fastener Application Tests Drop Lock & Torque Specifications

More information

Tubular connection elements

Tubular connection elements KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular

More information

CHAPTER 8 PARTS. 235 Unit number 235.

CHAPTER 8 PARTS. 235 Unit number 235. CHAPTER 8 PARTS GENERAL The parts section is broken into three sections. Section is the parts pictorial section where parts are shown in a graphical method with the part number displayed in tables related

More information

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.

Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927. Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page

More information

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms Components: 2 90006781 267c air spring 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms 1 90000626

More information

Heavy Duty Vertical Brackets

Heavy Duty Vertical Brackets Heavy Duty Vertical s Great for aluminum trailers Heavy duty 1/4 steel brackets are hot dip galvanized for lasting corrosion protection 1/4 heavy duty steel, 5 wide Four different heights to work with

More information

POLE MOUNT SYSTEM EX-3 INSTALLATION

POLE MOUNT SYSTEM EX-3 INSTALLATION May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

K17.11 DOOR BOLTS K17 DOORS 01.09.2013

K17.11 DOOR BOLTS K17 DOORS 01.09.2013 K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.

More information

FASTENERS SELECTION GUIDE

FASTENERS SELECTION GUIDE FASTENERS SELECTION GUIDE Choose from our most popular range of fasteners We have over 9,000 fasteners, fixings, ironmongery and hardware products online June 2016 uk.rs-online.com (UK customers) www.rs-components.com

More information

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 1. Lay out and familiarize yourself with the components and hardware supplied with the hitch. Note the included trailer wiring isolator

More information

HORIZONTAL INSTALLATION

HORIZONTAL INSTALLATION THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof

More information

STAINLESS STEEL BASINS. Concealed fixing. Includes plug and waste. 145mm (h) 380mm (w) 280mm (d)

STAINLESS STEEL BASINS. Concealed fixing. Includes plug and waste. 145mm (h) 380mm (w) 280mm (d) 98 STAINLESS STEEL SINKS STAINLESS STEEL BASINS STAINLESS STEEL SINGLE BOWLS Includes plug and straight waste or optional right angle outlet, perimeter seal and fitting clips. Concealed fixing. Includes

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Revised March 2007 TRINITY HIGHWAY PRODUCTS

Revised March 2007 TRINITY HIGHWAY PRODUCTS Revised March 2007 TRINITY HIGHWAY PRODUCTS 1 The following is an installation guide to assist contractors, filed inspectors and maintenance personnel to insure proper installation and maintenance of WY-BET

More information

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter

More information

SPARE-PARTS BOOK Z 150-195. Model: TABLE OF CONTENTS. Chapter 4.3: Alu.platform, flat 30mm laser L. Chapter 5: Cylinders

SPARE-PARTS BOOK Z 150-195. Model: TABLE OF CONTENTS. Chapter 4.3: Alu.platform, flat 30mm laser L. Chapter 5: Cylinders SPARE-PARTS BOOK TABLE OF CONTENTS Model: Z 50-95 Chapter 4.: Alu.platform, flat 0mm laser L PLZ044 Alu. platform Z, flat 0mm laser L Page 4 Chapter 5: Cylinders 5985 Lift cylinder Page 6 5986 Tilt cylinder

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS

PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS Merco Contempo Warmer Lamps offer graceful, dramatic styling to match any décor. They are made of exacting tolerance from heavy duty, solid, mandrelspun

More information

PITCHED ROOF STRUCTURES

PITCHED ROOF STRUCTURES PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system

More information

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition

More information

Using Dividing Plates with the Rotary Table

Using Dividing Plates with the Rotary Table The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

INSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************

INSTRUCTIONS THOROUGHLY BEFORE BEGINNING*************** Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

Metal-tech Front tube bumper Winch mount and Bash plate Installation directions by Metal-tech

Metal-tech Front tube bumper Winch mount and Bash plate Installation directions by Metal-tech Metal-tech, Cage LLC 1000 Commerce Parkway Ste. A, Newberg OR 97132 metaltech4x4.com 800-839-0684 info@metaltech4x4.com Metal-tech Front tube bumper Winch mount and Bash plate Installation directions by

More information

Experience In Motion. Valtek Spring Cylinder Linear Actuators

Experience In Motion. Valtek Spring Cylinder Linear Actuators Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators

More information

FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 510-42000-00 KIT P/N 510-42010-00 KIT P/N 510-42015-00

FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 510-42000-00 KIT P/N 510-42010-00 KIT P/N 510-42015-00 FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 0-000-00 KIT P/N 0-00-00 KIT P/N 0-0-00 TOOLS REQUIRED () /" WRENCHES OR SOCKETS TAPE MEASURE TORQUE WRENCH

More information

3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form

3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form 3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S

Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S *1756202470* 17562.0247.0 REV3 06/09 2012 Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S Issue Table description Issue n. of pages Overall view 06/2009 1 C.h.

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

HENDERSON WHEEL & WAREHOUSE SUPPLY. 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013

HENDERSON WHEEL & WAREHOUSE SUPPLY. 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013 HENDERSON WHEEL & WAREHOUSE SUPPLY 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013 Hub Pilot 8-Hole and 10- Hole Wheels... Page 1 Hub Pilot Duplex Wheels... Page 2 Stud Pilot 6-Hole and 10-Hole

More information

Installation Instructions

Installation Instructions Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information