DIN Rail Miniature Circuit Breakers
|
|
|
- Penelope Marsh
- 7 years ago
- Views:
Transcription
1 Catalog DIN Rail Miniature Circuit Breakers Ex9 Series - B Ex9BE3C20 Ex9BHC6
2 NOARK Electric Electrical Equipment Supplier for Distribution and Control NOARK Electric is a global supplier of electrical distribution and control products that address a variety of customer needs, ranging from components to intelligent system solutions. Our global product lines include: circuit breakers, contactors, relays and intelligent control. Based in Shanghai, China, NOARK Electric was established in 2007 and covers the globe with regional headquarters in North America and Europe. Globally, NOARK Electric serves the industrial, commercial, utility and residential markets. In North America, NOARK Electric focuses primarily on industrial OEMs, users and associated channel partners. Our motto is Excellent Product...Exceptional Value, which NOARK Electric delivers to our customer by maintaining local inventory, providing local sales, customer service and support and manufacturing quality, and aggressively priced products backed by a five-year limited warranty. Quality Product Backed by a 5-year limited warranty* 5 YEAR W A R R A N T Y * Exceptional Value Reduce the cost of products Improve profitability Increase margins Local Support and Local Inventory Superb customer service Knowledgeable technical support Dedicated sales force Well-stocked inventory North American headquarters *Limited warranty i
3 NOARK Electric International Locations in North America, Europe and China NOARK Electric North America NOARK Electric Europe NOARK Electric Europe NOARK Electric North America NOARK Electric Shanghai NOARK Electric Shanghai ii
4 iii
5 Noark Electric Table of Contents A UL 489 and UL 489A Miniature Circuit Breakers Product Overview...A3 National and International Standards...A4 Product Selection Guide...A5 Specifications...A6 Products BH (UL 489, 480Y/277 Vac)...A7-8 BN (UL 489, 240 Vac)...A9-2 BA (UL 489A, 60 Vdc)...A3-4 Trip Curves...A5-6 Dimensions...A7 Accessories...A8-20 Accessory Dimensions...A2 B UL 077 Supplementary Protectors Product Overview... B23 National and International Standards... B24 Product Selection Guide... B25 Specifications... B26 Products BE (UL 077, 480Y/277 Vac)... B27-28 Trip Curves... B29-30 Dimensions... B3 Accessories... B32-33 Accessory Dimensions... B34
6 MINIATURE CIRCUIT BREAKERS UL 489 UL 489A
7 Miniature Circuit Breakers UL 489/489A Product Overview A Features Complete range of UL 489 and UL 489A listed miniature circuit breakers up to a 63A current rating Breakers mount on standard 35 mm DIN rail Standard ratings of 0 ka at 480Y/277 Vac and 0 ka at 25 Vdc Suitable for branch circuit device protection Trip-free design breaker cannot be defeated by holding the handle in the ON position Captive screws cannot be lost For use in applications for which UL 077 or CSA C22.2 No.235 are also allowed Field installable shunt trip and auxiliary switch subsequent mounting Available with provisions for ring tongue terminals Module width of only 8 mm (per pole) Contact position indicator (red/green) Possibility for locking the toggle in ON or OFF position Typical Application Branch Circuit Protection Convenience receptacle circuits (internal/external) Motor control circuits Load circuits leaving the equipment (external) HACR equipment: heating, air conditioning, refrigeration (internal/external) PLC I/O points Power supplies Control instrumentation Relays UPS Power conditioners A3
8 Miniature Circuit Breakers UL 489/489A National and International Standards Certifications UL 489 / CSA C22.2 No.5 / IEC Standard for molded case circuit breakers (MCCB) for feeder and branch circuit protection. Canadian Standards Association (CSA) C22.2 No standard for branch circuit protection. UL 489A requirements covering single pole DC circuit breakers intended for use as a branch circuit over current and short circuit protection in communications equipment. UL 486 standard for connection terminals which allows the user to apply field wiring directly to the breaker. IEC standard for industrial applications of circuit protection. RoHS These devices are RoHS compliant. Breakers have UL 486 rated connectors which means the breakers can be wired directly to the load without the need for terminal strips. A4
9 Miniature Circuit Breakers UL 489/489A Product Selection Guide A Label These branch circuit breakers are available in two terminal configurations: standard box terminals that accept multiple conductors and ring-tongue terminals. All breakers mount on standard 35 mm DIN rail. Bus connectors and feeder terminal facilitate mounting and wiring of multiple miniature circuit breaker arrays in control panel assemblies. Breakers can also be reverse feed Brand 2 Product Type 3 Rated Current 4 Tripping Curve 5 Rated Voltage 6 Frequency 7 Interrupting Rating 8 Utility Type 9 CE Mark 0 IEC Standard Breaker Status Indicator 2 UL Listed Mark Product Selection Guide B N C 20 R NOARK Ex9 Series - B Standard Poles Trip Curves Rated Current Terminal Code N: 240 Vac/25 Vdc UL 489 Listed : Pole B: 3~5 In BH: 0.5~20A Blank: Box Lugs are Standard H: 480Y/277 Vac; UL 489 Listed 2: 2 Pole C: 5~0 In BN: 0.5~63A R: Ring Tongue Terminal A: 60 Vdc ( Pole Only); UL 489A Listed 3: 3 Pole D: 0~4 In BA: 0.5~63A A5
10 Miniature Circuit Breakers UL 489/489A Specifications BH BN BA Conformed Standard UL 489 UL 489A Rated Operational Voltage (V) 480Y/277 Vac 240 Vac; 60/25 Vdc 60 Vdc Rated Frequency (Hz) 50/60 Hz Rated Current (A) 0.5~20 0.5~63 0.5~63 Number of Poles Rated Insulation Voltage (V) 500 Rated Impulse Withstand Voltage (kv) 6 Instantaneous Tripping Type B, C, D 20 Vac Vac Interrupting (ka) 277 Vac Y/277 Vac Vdc Vdc - - Inverse Time-Delay Over-Current Release Type Thermal-magnetic Service Life Electrical 6000 Mechanical 0000 Protection Degree IP20 Wire 4~4 AWG (single wire) 4~6 AWG / 4~0 AWG (two wires) Testing Ambient Air Temperature Range 23ºF to 04ºF (-5ºC to +40ºC) Working Ambient Air Temperature Range -3ºF to 3ºF (-25ºC to +55ºC) Rated Insulation Voltage 500 Vac Insulation Coordination Rated Impulse Withstand Voltage 6 kv Pollution Degree Class 3 Over Voltage Category / Mounting Class III / 35 mm DIN rail Altitude Does not exceed 2000m Atmospheric Conditions At +20, the relative humidity does not exceed 90% At +40, the relative humidity does not exceed 50% Connection Diagram P 2P 3P 6 A6
11 Miniature Circuit Breakers BH UL Y/277 Vac 0 ka A Certifications IEC/EN Rated Amperage B Curve (3~5 In) C Curve (5~0 In) D Curve (0~4 In) Pole Vac 2 Poles - 480Y/277 Vac 3 Poles - 480Y/277 Vac Product Part Number Product Part Number Product Part Number 0.5 BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHB BH2B BH3B BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHC BH2C BH3C BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D BHD BH2D BH3D For accessories, see pages A8-2. A7
12 Miniature Circuit Breakers BHR UL Y/277 Vac 0 ka - Ring Tongue Terminals Certifications IEC/EN Rated Amperage B Curve (3~5 In) C Curve (5~0 In) D Curve (0~4 In) Pole Vac 2 Poles - 480Y/277 Vac 3 Poles - 480Y/277 Vac Product Part Number Product Part Number Product Part Number 0.5 BHB0.5R BH2B0.5R BH3B0.5R BHBR BH2BR BH3BR BHB.6R BH2B.6R BH3B.6R BHB2R BH2B2R BH3B2R BHB3R BH2B3R BH3B3R BHB4R BH2B4R BH3B4R BHB5R BH2B5R BH3B5R BHB6R BH2B6R BH3B6R BHB8R BH2B8R BH3B8R BHB0R BH2B0R BH3B0R BHB3R BH2B3R BH3B3R BHB5R BH2B5R BH3B5R BHB6R BH2B6R BH3B6R BHB20R BH2B20R BH3B20R BHC0.5R BH2C0.5R BH3C0.5R BHCR BH2CR BH3CR BHC.6R BH2C.6R BH3C.6R BHC2R BH2C2R BH3C2R BHC3R BH2C3R BH3C3R BHC4R BH2C4R BH3C4R BHC5R BH2C5R 0009 BH3C5R BHC6R BH2C6R BH3C6R BHC8R BH2C8R BH3C8R BHC0R BH2C0R BH3C0R BHC3R BH2C3R BH3C3R BHC5R BH2C5R BH3C5R BHC6R BH2C6R BH3C6R BHC20R BH2C20R BH3C20R BHD0.5R BH2D BH3D0.5R BHDR BH2D BH3DR BHD.6R BH2D BH3D.6R BHD2R BH2D BH3D2R BHD3R BH2D BH3D3R BHD4R BH2D BH3D4R BHD5R BH2D BH3D5R BHD6R BH2D BH3D6R BHD8R BH2D BH3D8R BHD0R BH2D BH3D0R BHD3R BH2D BH3D3R BHD5R BH2D BH3D5R BHD6R BH2D BH3D6R BHD20R BH2D BH3D20R For accessories, see pages A8-2. A8
13 Miniature Circuit Breakers BN UL Vac; 60/25 Vdc 0 ka A Certifications IEC/EN Rated Amperage B Curve (3~5 In) C Curve (5~0 In) Pole Vac / 60 Vdc 2 Poles Vac / 25 Vdc 3 Poles Vac Product Part Number Product Part Number Product Part Number 0.5 BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNB BN2B BN3B BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C BNC BN2C BN3C A9
14 Miniature Circuit Breakers BN UL Vac; 60/25 Vdc 0 ka Certifications IEC/EN Rated Amperage D Curve (0-4 In) Pole Vac / 60 Vdc 2 Poles Vac / 25 Vdc 3 Poles Vac Product Part Number Product Part Number Product Part Number 0.5 BND BN2D BN3D BND BN2D 000 BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D BND BN2D BN3D For accessories, see pages A8-2. A0
15 Miniature Circuit Breakers BNR UL Vac; 60/25 Vdc 0 ka - Ring Tongue Terminals A Certifications IEC/EN Rated Amperage B Curve (3~5 In) C Curve (5~0 In) Pole Vac / 60 Vdc 2 Poles Vac / 25 Vdc 3 Poles Vac Product Part Number Product Part Number Product Part Number 0.5 BNB0.5R BN2B0.5R BN3B0.5R BNBR BN2BR BN3BR BNB.6R BN2B.6R BN3B.6R BNB2R BN2B2R BN3B2R BNB3R BN2B3R BN3B3R BNB4R BN2B4R BN3B4R BNB5R BN2B5R BN3B5R BNB6R BN2B6R BN3B6R BNB8R BN2B8R BN3B8R BNB0R BN2B0R BN3B0R BNB3R BN2B3R BN3B3R BNB5R BN2B5R BN3B5R BNB6R BN2B6R BN3B6R BNB20R 0002 BN2B20R BN3B20R BNB25R BN2B25R BN3B25R BNB30R BN2B30R BN3B30R BNB32R BN2B32R BN3B32R BNB35R BN2B35R BN3B35R BNB40R BN2B40R BN3B40R BNC0.5R BN2C0.5R BN3C0.5R BNCR BN2CR BN3CR BNC.6R BN2C.6R BN3C.6R BNC2R BN2C2R BN3C2R BNC3R BN2C3R BN3C3R BNC4R BN2C4R BN3C4R BNC5R BN2C5R BN3C5R BNC6R BN2C6R BN3C6R BNC8R BN2C8R BN3C8R BNC0R BN2C0R BN3C0R BNC3R BN2C3R BN3C3R BNC5R BN2C5R BN3C5R BNC6R BN2C6R BN3C6R BNC20R BN2C20R BN3C20R BNC25R BN2C25R BN3C25R BNC30R BN2C30R BN3C30R BNC32R BN2C32R BN3C32R BNC35R BN2C35R BN3C35R BNC40R BN2C40R BN3C40R For accessories, see pages A8-2. A
16 Miniature Circuit Breakers BNR UL Vac; 60/25 Vdc 0 ka - Ring Tongue Terminals Certifications IEC/EN Rated Amperage D Curve (0-4 In) Pole Vac / 60 Vdc 2 Poles Vac / 25 Vdc 3 Poles Vac Product Part Number Product Part Number Product Part Number 0.5 BND0.5R BN2D0.5R BN3D0.5R BNDR BN2DR BN3DR BND.6R BN2D.6R BN3D.6R BND2R BN2D2R BN3D2R BND3R BN2D3R BN3D3R BND4R BN2D4R BN3D4R BND5R BN2D5R BN3D5R BND6R BN2D6R BN3D6R BND8R BN2D8R BN3D8R BND0R BN2D0R BN3D0R BND3R BN2D3R BN3D3R BND5R BN2D5R BN3D5R BND6R BN2D6R BN3D6R BND20R BN2D20R BN3D20R BND25R BN2D25R BN3D25R BND30R BN2D30R BN3D30R BND32R BN2D32R BN3D32R BND35R BN2D35R BN3D35R BND40R BN2D40R 0003 BN3D40R For accessories, see pages A8-2. A2
17 Miniature Circuit Breakers BA UL 489A 60 Vdc 0 ka A Certifications IEC/EN Rated Amperage 0.5 B Curve (3~5 In) Pole Pole Pole Product Part Number Product Part Number Product Part Number BAB C Curve (5~0 In) BAC D Curve (0-4 In) BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD BAB BAC BAD For accessories, see pages A8-2. A3
18 Miniature Circuit Breakers BA UL 489A 60 Vdc 0 ka - Ring Tongue Terminals Certifications IEC/EN Rated Amperage 0.5 B Curve (3~5 In) Pole Pole Pole Product Part Number Product Part Number Product Part Number BAB0.5R C Curve (5~0 In) BAC0.5R 00 D Curve (0-4 In) BAD0.5R 0030 BABR BACR 002 BADR BAB.6R BAC.6R 003 BAD.6R BAB2R BAC2R 004 BAD2R BAB3R BAC3R 005 BAD3R BAB4R BAC4R 006 BAD4R BAB5R BAC5R 007 BAD5R BAB6R BAC6R 008 BAD6R BAB8R 0000 BAC8R 009 BAD8R BAB0R 000 BAC0R 0020 BAD0R BAB3R 0002 BAC3R 002 BAD3R BAB5R 0003 BAC5R 0022 BAD5R BAB6R 0004 BAC6R 0023 BAD6R BAB20R 0005 BAC20R 0024 BAD20R BAB25R 0006 BAC25R 0025 BAD25R BAB30R 0007 BAC30R 0026 BAD30R BAB32R 0008 BAC32R 0027 BAD32R BAB35R 0009 BAC35R 0028 BAD35R BAB40R 000 BAC40R 0029 BAD40R 0048 For accessories, see pages A8-2. A4
19 Miniature Circuit Breakers UL 489/489A Trip Curves A B Curve (3~5 In) t (s) h or 2h I/In C Curve (5~0 In) t (s) h or 2h I/In A5
20 Miniature Circuit Breakers UL 489/489A Trip Curves D Curve (0~4 In) t (s) h or 2h I/In A6
21 Miniature Circuit Breakers UL 489/489A Dimensions A BH/N/A P/2P/3P Unit: in. [mm] 3P 2P P 2.0 [53.4].40 [35.6] 0.70 [7.8] 2.99 [76] (P) / 3. [79] (2P,3P) 2.3 [54] 0.22 [5.5] 3P 2P P 2.0 [53.4].40 [35.6] 0.70 [7.8] 2.99 [76] (P) / 3. [79] (2P,3P) 2.3 [54] 5.2 [30] 3.65 [92.6].36 [34.5].77 [45] 4.30 [09.3] 2.64 [67].36 [34.5].77 [45] 4.06 [03] BH/N/A with Ring Tongue Terminal P/2P/3P Unit: in. [mm] 0.22 [5.5] A7
22 Miniature Circuit Breakers UL 489/489A Accessories: Alarm Switch, Aux Contact, RTT AL3 N Description Auxiliary Contact Device Category Alarm Switch : NO+NC N: UL 489 and UL 489A Accessory Description Product Part Number Alarm Switch AL3N 0020 N /- TRIP ON/OFF L/+ AX3 N Description Auxiliary Contact Device Category Auxiliary Contact : NO+NC N: UL 489 and UL 489A 4 2 Accessory Description Product Part Number ON OFF Auxiliary Contact AX3N N /- L/+ RTT3 N Description Ring Tongue Terminal Device Category N: UL 489 and UL 489A Accessory Description Product Part Number RTT Kit RTT3N 0024 A8
23 Miniature Circuit Breakers UL 489/489A Accessories: Under-Voltage and Shunt Trip A UVT3 0 N A U< Description Auxiliary Contact Device Category Rated Voltage Under-Voltage Trip 0: NC 0: NO N: UL 489 and UL 489A A: 240 Vac B: 48 Vac/dc 2 D D2 OFF N /- L /+ N/- L/+ UVT30 Blank: No Auxiliary Contact U< Accessory Description Product Part Number 3 4 D D2 Under-Voltage Trip NC / 240Vac UVT30NA NC / 48Vac/dc UVT30NB NO / 240Vac UVT30NA NO / 48Vac/dc UVT30NB Vac UVT3NA Vac/dc UVT3NB ON L /+ N/- L/+ UVT30 U< N /- D D2 SHT3 N A N/- L/+ UVT3 Description Auxiliary Contact Device Category Rated Voltage Shunt Trip : NO+NC N: UL 489 and UL 489A A: 0-45 Vac, 0-30 Vdc U Blank: No Auxiliary Contact B: 48 Vac/dc C: 2-24 Vac/dc C C2 Accessory Description Product Part Number N/- L/+ SHT3 NO+NC 0-45 Vac/0-30 Vdc SHT3NA U NO+NC Vac/dc SHT3NB Shunt Trip NO+NC 2-24 Vac/dc SHT3NC 0020 C 4 2 C Vac/0-30 Vdc SHT3NA Vac/dc SHT3NB Vac/dc SHT3NC 0023 N/- ON OFF L/+ SHT3 A9
24 Miniature Circuit Breakers UL 489/489A Accessories: Padlock, Extend Rotary Handle KLK3 N Description Device Category Padlock N: UL 489 and UL 489A Accessory Description Product Part Number Padlock Lock Off KLK3N ERH 3 N L Description Shaft Length Device Category Position Color Extended Rotary Handle 3: 6 (60 mm) N: UL 489 and UL 489A L: Vertical, Front Mount : Grey/Green 32: 0 (240 mm) S: Horizontal, Side Mount 2: Red/Yellow LD: Vertical, Front Mount with Door Interlock SD: Horizontal, Side Mount with Door Interlock Accessory Description Product Part Number Product Part Number 6 Shaft 0 Shaft Vertical Grey/Green ERH3NL 0023 ERH32NL Front Mount Red/Yellow ERH3NL ERH32NL Horizontal Grey/Green ERH3NS ERH32NS 0024 Extended Side Mount Red/Yellow ERH3NS ERH32NS Rotary Vertical Grey/Green ERH3NLD ERH32NLD Handle Front Mount with Door Interlock Red/Yellow ERH3NLD ERH32NLD Horizontal Grey/Green ERH3NSD ERH32NSD Side Mount with Door Interlock Red/Yellow ERH3NSD ERH32NSD A20
25 Miniature Circuit Breakers UL 489/489A Accessory Dimensions A UVT3V UVT20N UVT30N SHT3N SHT3N Unit: in. [mm] 0.70 [7.8] 0.22 [5.5] 2.99 [76] 2.3 [54] 4.06 [03].42 [36].77 [45] AL3N AX3N Unit: in. [mm] 0.35 [9] 0.22 [5.5] 2.99 [76] 2.3 [54] 4.06 [03].77 [45] A2
26 SUPPLEMENTARY PROTECTORS UL 077
27 Supplementary Protectors UL 077 Product Overview Features Complete range of UL 077 listed miniature circuit breakers up to a 63A current rating Breakers mount on standard 35 mm DIN rail Standard ratings of 5 ka at 480Y/277 Vac Suitable for supplementary protection Thermal-magnetic over current protection Three levels of short-circuit protection, categorized by B, C and D curves Trip-free design breaker cannot be defeated by holding the handle in the ON position Captive screws cannot be lost Fulfill UL 077, IEC Standard Field-installable shunt trip and auxiliary switch subsequent mounting Module width of only 8 mm (per pole) Contact position indicator (red/green) Possibility for locking the toggle in ON or OFF position B Typical Application Supplementary Protection Control circuits Lighting Business equipment Appliances B23
28 Supplementary Protectors UL 077 National and International Standards Certifications UL 077 / CSA C22.2 No.235 / IEC Supplementary Protectors are UL Recognized for use in the United States in accordance with NFPA 70 (NEC). The devices comply with UL 077 and CSA 22.2 No. 235, meeting the requirements for supplementary protectors. These devices are for international and domestic use, and also comply with IEC and are CE marked. RoHS These devices are RoHS compliant. B24
29 Supplementary Protectors UL 077 Product Selection Guide Label B These branch circuit breakers are available in two terminal configurations: standard box terminals that accept multiple conductors and ring-tongue terminals. All breakers mount on standard 35 mm DIN rail. Bus connectors and feeder terminal facilitate mounting and wiring of multiple miniature circuit breaker arrays in control panel assemblies. Breakers can also be reverse feed Brand 2 Product Type 3 Rated Current 4 Tripping Curve 5 Rated Voltage 6 Frequency 7 Interrupting Rating 8 CE Mark 9 IEC Standard 0 Breaker Status Indicator UL Recognized Component Product Selection Guide BE C 63 NOARK Ex9 Series - BE Number of Poles Trip Curves Rated Current : Pole 2: 2 Pole 3: 3 Pole B: 3-5 In C: 5-0 In D: 0-4 In : A.6:.6A 2: 2A 3: 3A 4: 4A 5: 5A 6: 6A 8: 8A 0: 0A 3: 3A 5: 5A 6: 6A 20: 20A 25: 25A 30: 30A 32: 32A 40: 40A 50: 50A 60: 60A 63: 63A 4: 4 Pole B25
30 Supplementary Protectors UL 077 Specifications BE Conformed Standard UL 077 Rated Operational Voltage (V) 480Y/277 Vac 25 Vdc Rated Frequency (Hz) 50/60 Hz Rated Current (A) ~63 Number of Poles Rated Insulation Voltage (V) 500 Rated Impulse Withstand Voltage (kv) 6 Instantaneous Tripping Type B, C, D 20 Vac Vac 0 Interrupting (ka) 277 Vac 5-480Y/277 Vac Vdc 0 25 Vdc Inverse Time-Delay Over-Current Release Type Thermal-Magnetic Service Life Electrical 6000 Mechanical 0000 Protection Degree IP20 Wire 4~4 AWG Testing Ambient Air Temperature Range 23ºF to 04ºF (-5ºC to +40ºC) Working Ambient Air Temperature Range -3ºF to 3ºF (-25ºC to +55ºC) Rated Insulation Voltage 500 Vac Insulation Coordination Rated Impulse Withstand Voltage 6 kv Pollution Degree Class 3 Over Voltage Category / Mounting Class III / 35 mm DIN rail Altitude Does not exceed 2000m Atmospheric Conditions At +20, the relative humidity does not exceed 90% At +40, the relative humidity does not exceed 50% Connection Diagram P 2P 3P 4P (BE only) B26
31 Supplementary Protectors BE UL Y/277 Vac 5 ka Certifications IEC/EN B Rated Amperage B Curve (3~5In) C Curve (5~0In) Pole - 277V 2 Poles - 480V 3 Poles - 480V 4 Poles - 480V Product Part Number Product Part Number Product Part Number Product Part Number BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEB BE2B BE3B BE4B BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C BEC BE2C BE3C BE4C For accessories, see pages B B27
32 Supplementary Protectors BE UL Y/277 Vac 5 ka Certifications IEC/EN Rated Amperage D Curve (0~4In) Pole - 277V 2 Poles - 480V 3 Poles - 480V 4 Poles - 480V Product Part Number Product Part Number Product Part Number Product Part Number BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D BED BE2D BE3D BE4D For accessories, see pages B B28
33 Supplementary Protectors UL 077 Trip Curves B Curve (3~5 In) t (s) h or 2h I/In B C Curve (5~0 In) t (s) h or 2h I/In B29
34 Supplementary Protectors UL 077 Trip Curves D Curve (0~4 In) t (s) h or 2h I/In B30
35 Supplementary Protectors UL 077 Dimensions BE P/2P/3P/4P Unit: in. [mm] 4P 3P 2.80 [7.2] 2.0 [53.4] B 2P P.40 [35.6] 0.70 [7.8] 2.99 [76] (P) / 3. [79] (2P, 3P, 4P).97 [50] 3.52 [89.4] 2.64 [67.0].36 [34.5].77 [45] 3.27 [83] 0.22 [5.5] B3
36 Supplementary Protectors UL 077 Accessories: Alarm Switch, Auxiliary Contact AL3 U Description Auxiliary Contact Device Category Alarm Switch : NO+NC U: UL Accessory Description Product Part Number Alarm Switch AL3U 0026 N /- TRIP ON/OFF L/+ AX3 U Description Auxiliary Contact Device Category Auxiliary Contact : NO+NC U: UL Accessory Description Product Part Number ON OFF Auxiliary Contact AX3U 0025 N /- L/+ B32
37 Supplementary Protectors UL 077 Accessories: Under-Voltage and Shunt Trip UVT3 0 U A U< B Description Auxiliary Contact Device Category Rated Voltage Under-Voltage Trip 0: NC U: UL 077 A: 240 Vac 2 D D2 OFF 0: NO B: 48 Vac/dc L /+ N/- L/+ UVT30 N /- Blank: No auxiliary contact U< Accessory Description Product Part Number 3 4 D D2 Under-Voltage Trip NC / 240Vac UVT30UA 0027 NC / 48Vac/dc UVT30UB 0028 NO / 240Vac UVT30UA 0029 NO / 48Vac/dc UVT30UB Vac UVT3UA Vac/dc UVT3UB ON L /+ N/- L/+ UVT30 U< N /- D D2 SHT3 U A N/- L/+ UVT3 Description Auxiliary Contact Device Category Rated Voltage Shunt Trip : NO+NC U: UL 077 A: 0-45 Vac, 0-30 Vdc U Blank: No auxiliary contact B: 48 Vac/dc C: 2-24 Vac/dc C C2 Accessory Description Product Part Number N/- L/+ SHT3 Shunt Trip NO+NC 0-45 Vac/0-30 Vdc SHT3UA NO+NC Vac/dc SHT3UB NO+NC 2-24 Vac/dc SHT3UC Vac/0-30 Vdc SHT3UA Vac/dc SHT3UB Vac/dc SHT3UC C N/- 4 ON U 2 C2 OFF L/+ SHT3 B33
38 Supplementary Protectors UL 077 Accessory Dimensions UVT3U UVT30U UVT30U SHT3U SHT3U Unit: in. [mm] 0.7 [8] 0.22 [5.5] 2.99 [76].97 [50] 3.27 [83].42 [36].77 [45] 3.27 [83] AL3U AX3U Unit: in. [mm] 0.35 [9] 0.22 [5.5] 2.95 [75].97 [50] 3.39 [86].42 [36].77 [45] 3.27 [83] B34
39 B35
40 NOARK Electric North America (44) Note: NOARK Electric reserves the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. NOARK Electric does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. NOARK Electric reserves all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of NOARK Electric. CMCB20302NA
Circuit Breakers. Next Generation of Protection Capabilities
Circuit Breakers Next Generation of Protection Capabilities Circuit Breaker Offering Rockwell Automation offers a full line of Allen-Bradley circuit breakers and motor protection devices to help meet many
Electronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
Tmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
Electronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
Product Guide. Cable-in / cable-out miniature circuit breakers and supplementary protectors
Product Guide Cable-in / cable-out miniature circuit breakers and supplementary protectors Cable-in / cable-out miniature circuit breakers and supplementary protectors Eaton offers a complete line of
Molded Case Circuit Breakers, Motor Protection Circuit Breakers, and Motor Circuit Protectors. Technical Data
Molded Case Circuit Breakers, Motor Protection Circuit Breakers, and Motor Circuit Protectors Technical Data Table of Contents Introduction... 4 Definitions... 5 Product Range... 8 Product Line Overview...11
Bulletin 1489 Circuit Breakers. Selection Guide
Bulletin 1489 s Selection Guide Bulletin 1489-A Overview/Description Bulletin 1489-A s Energy-limiting design protects downstream components better than conventional breakers during short circuits Field-mountable
Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Topic Page 1489-M Miniature Circuit Breakers 2 1492-SP Supplementary Protectors 15 1492-D Circuit Breakers 27 188 Regional
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
Molded Case Circuit Breaker Specifications Bulletin Number 140U-D
Technical Data Molded Case Circuit Breaker Specifications Bulletin Number 140U-D Topic Page Product Line Overview 2 Specifications 3 Trip Curves 4 Approximate Dimensions 6 Additional Resources These documents
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
Bimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
Uncompromising safety and comfort Miniature Circuit Breaker SU 200 M for branch circuit protection per UL and CSA
Uncompromising safety and comfort Miniature Circuit Breaker SU 200 M for branch circuit protection per UL and CSA Miniature Circuit Breaker SU 200 M The next generation MCB for UL/CSA applications within
Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
Miniature Circuit Breakers and Supplementary Protectors
Miniature Circuit Breakers and Supplementary Protectors Miniature Circuit Breakers and Supplementary Protectors. Industrial Circuit Breakers QUICKLAG............................................. QUICKLAG
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
Bussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
R.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
Application Switchgear for industrial and commercial applications. U e V AC 230/400. 48 (per pole)
Overcurrentswitch,6A,2p,D-Char,AC Partno. FAZ-D6/2 Articleno. 278777 CatalogNo. FAZ-D6/2 Similar to illustration Deliveryprogramme Basic function Miniature circuit breakers Pole 2 pole Tripping characteristic
Manual Motor Starter MS 116 up to 16 A Technical Data
Manual Motor Starter MS 116 up to 16 A Technical Data Type MS 116 Standards: Major International IEC 60 947-4-1 / IEC 60 947-2 and European Standards EN 60 947-4-1 / EN 60 947-2 Approvals, Certificates
Circuit Breakers Supplementary Protectors Manual Motor Controllers
WHITE PAPER Circuit Breakers Supplementary Protectors Manual Motor Controllers Circuit Protection Methods Differentiating between Supplementary Protection, Branch Circuit Protection, and Self-Protected
Circuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
Low voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Thermal-Magnetic / Magnetic Only Molded Case Circuit Breakers
Thermal-Magnetic / Magnetic Only Molded Case Circuit Breakers Catalog 2004 Class 601 CONTENTS Description..............................................Page INTRODUCTION.............................................
5SV Residual Current Protective Devices
s Siemens AG 2013 SENTRON 5SV Residual Current Protective Devices New portfolio for reliable personnel, material and fire protection Safe protection against residual currents Residual current protective
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
Molded case circuit breakers
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product technology. Never before has the industry seen such high
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
NM8, NM8S NM8, NM8S. Moulded Case Circuit Breakers. 3. Type designation. 4. Product overview N M 8 / / /
Moulded Case Circuit Breakers NM8, NM8S 3. Type designation 4. Product overview N M 8 / / / NM8 Moulded Case Circuit Breaker Application code Blank: for power distribution; NM8, NM8S Moulded Case Circuit
General information Circuit breakers for power distribution T1 T3
Circuit breakers for power distribution T1 T3 T1 T2 T3 T1 1P T1 T2 T3 UL 489 CSA C22.2 Frame size A 100 100 100 225 Number of poles Nr 1 3, 4 3, 4 3, 4 Rated voltage AC (50-60 Hz) V 277 600Y / 347V 480
IEC style contactors - long electrical and mechanical life Complete range from mini-contactors to 630 Amp i n d u c t i ve AC3 ra t i n g s Wide
- long al and mechanical life Complete range from mini-contactors to 630 Amp i n d u c t i ve AC3 ra t i n g s Wide range coils +0% to -30% Finger safe terminals Four-pole versions available NO + NC and
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
System pro M compact Miniature Circuit Breaker S 200/S 200 M
Data Sheet System pro M compact Miniature Circuit Breaker S 200/S 200 M 2CDC021023S0012 2CDC021038S0012 The miniature circuit breakers of the System pro M compact series S 200 and S 200 M provide state-of-the-art
BETA Protecting SITOR Semiconductor Fuses
BETA Protecting SITOR Semiconductor Fuses /2 Product overview /3 /17 SITOR, cylindrical fuse design /22 SILIZED, NEOZED and DIAZED design Siemens ET B1 /2008 Product overview Overview Devices Page Field
ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1
MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
PNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
ZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
Catalog January. Heavy industrial power applications Motor contactors and starters
Catalog January Heavy industrial power applications Motor contactors and starters 2006 General contents 0 Heavy Industrial Power Applications Motor Contactors and Starters 1 Contactors and Starters, Type
Relés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
Contact expander modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact expansion module for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs:
ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
E-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
3AH5 Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG 11.05 2010
Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.05 2010 Answers for energy. R-HG11-172.tif 2 Siemens HG 11.05 2010 Contents Contents Page 3AH5 Vacuum Circuit-Breakers Medium-Voltage
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
D-Line Contactors, Overload Relays and Accessories
D-Line Contactors, Overload Relays and Accessories Class 850 CONTENTS Description......................................................Page General Information...............................................
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
US Breaker Brand 3 Pole AC Contactors (Square D Telemecanique LC1 Replacements)
4 NC1 D09-D18 NC1 -D32 US Breaker Brand 3 Pole AC Contactors (Square D Telemecanique LC1 Replacements) Standards: UL508, CSA C22.2, IEC 60947, and CE Marked Integral DIN Rail & Base Mounting in One Compact
ZS25 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK668D0 Catalogue Page SNK678S0 ZS Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to mm² AWG in just mm 0.47 in spacing. SNK68V004 SNK004F0000 D CAD
ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used
Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41
Data sheet Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 The three-phase monitoring relays CM-PSS.x1 monitor the phase parameters phase sequence, phase failure as well as over- and undervoltage.
40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
Intersection Preassembled 19-inch Rack
Intersection Preassembled 19-inch Rack The intersection preassembled 19-inch rack comes fully assembled, wired and ready to be installed in a server rack. The rack provides communications, power conversion
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
Rotary Disconnect Switch Specifications
Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources
Safety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
SURGE PROTECTIVE DEVICES
SURGE PROTECTIVE DEVICES 1. INTRODUCTION In order to ensure safety of people, protection of equipment and, to a certain extent, continuity of supply, insulation co-ordination aims at reducing the likelihood
Dimensions, Inches (mm) No. of Poles Width Height Depth 2, 3 8.25 (210) 16 (407) 5.5 (140) 4 11.125 (283) 16 (407) 5.5 (140)
9-10N Supersedes Selection Data 9-10N, pages, 1-, dated dated March March 1995 1995 Mailed to: E, D, C/9-100A, 31-A, INTERRUPTING CAPACITY RATINGS IEC 947- Interrupting Capacity s➀ Interrupting Capacity
Control Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
Contact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts
AC1645. System pro M compact Supplementary Protectors Miniature MCCBs
AC1645 System pro M compact Supplementary Protectors Miniature MCCBs Table of Content 1 2 3 4 5 pro M compact General information...1.1 S200 - Supplementary protectors...1.7 S200U - Miniature MCCBs...1.12
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
Operation and Maintenance manual. fusible shunt trip switch
Operation and Maintenance manual fusible shunt trip switch Table of Contents Fusible Shunt Trip Switch Device Overview... 2 Installation Instructions... 3 Catalog Number Selection Table... 4 Motor Fuse
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Guidelines on the Short Circuit Current Rating for Industrial Control Panels
usa.siemens.com/sccr Guidelines on the Short Circuit Current Rating for Industrial Control Panels Technical Paper for Practical Applications White Paper I October 2014 As per NEC Edition 2014, and UL508A
MOTOR PROTECTIVE DEVICES
W MOTOR PROTECTIVE DEVICE, SERIES MP 206 BE400206 BE400306 Inherently stable without back-up fuseup to 4 A at 400 V AC, > 4 A main back-up fuse 100 A gl Thermal and magnetic release Terminal and accessory
Sentron Series Circuit Breakers
Sentron Series Circuit Breakers Siemens Sentron Series circuit breakers are available in nine frame sizes: ED, FD, JD, LD, LMD, MD, ND, PD, and RD. Sentron Series circuit breakers have a wide range of
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
NEXT SOLUTION EXPERT SOLUTION EXCELLENT SOLUTION. Super Solution
NEXT SOLUTION EXPERT SOLUTION EXCELLENT SOLUTION Super Solution Low voltage circuit breakers Susol LV circuit breakers Super Solution Contents Overview Electrical characteristics Trip units Accessories
MEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
Catalog. Modular DIN rail components Installation contactors
Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation
Selection Guide. Bulletin 194R/140U External Operating Handles
Selection Guide Bulletin 194R/140U Bulletin 194R/140U Notes 2 Bulletin 194R/140U Product Overview/Product Selection Bulletin 194R/140U Next Generation Disconnect Handles Available in matte black for ON-OFF
Submit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
ASCO SERIES 185 Power Transfer Switches
ASCO SERIES 185 Power Transfer Switches 4-hour protection no matter when trouble strikes ASCO Series 185 Power Transfer Switches An Automatic Transfer Switch helps prevent... Your business or home from
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
Bulletin 150 SMC Flex Smart Motor Controller Specifications
Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering
Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation