CAD Import Module and LiveLink for CAD V4.3a

Size: px
Start display at page:

Download "CAD Import Module and LiveLink for CAD V4.3a"

Transcription

1 CAD Import Module and LiveLink for CAD V4.3a LiveLink for AutoCAD, LiveLink for Creo Parametric, LiveLink for Inventor, LiveLink for Pro/ENGINEER, LiveLink for Solid Edge, LiveLink for SolidWorks, LiveLink for SpaceClaim

2 Contents Feature Guide LiveLink Interface One Window Interface File Import CAD Import Module Kernel Defeaturing and Repair Virtual Geometry and Mesh Control Operations

3 Feature Guide LiveLink interface COMSOL Multiphysics CAD Import Module LiveLink for CAD * One Window interface X ** CAD File Import X X CAD dedicated geometry kernel Defeaturing and Repair X X Export to Parasolid X X Virtual geometry and mesh control operations X X X X * LiveLink for AutoCAD, LiveLink for Creo Parametric, LiveLink for Inventor, LiveLink for Pro/ENGINEER, LiveLink for Solid Edge, LiveLink for SolidWorks, and LiveLink for SpaceClaim ** LiveLink for SolidWorks

4 LiveLink Interface

5 Benefits Set up your COMSOL model only once for multiple CAD design configurations Optimize the CAD design by automatically sweeping over, and solving the model, for a range of design variations No need to keep track of several CAD files with variations of the same design Transferred geometry can be defeatured and modified in COMSOL Leverage COMSOL s capability of server and cluster computing Integrate with LiveLink for MATLAB for even greater flexibility

6 LiveLink for CAD: Supported Software New CAD Software and Version LiveLink for AutoCAD AutoCAD 2012, 2013 LiveLink for Creo Parametric Creo Parametric 1.0, 2.0 LiveLink for Inventor Inventor 2012, 2013 LiveLink for Pro/ENGINEER Pro/ENGINEER Wildfire 4.0, 5.0 Creo Elements/Pro 5.0 LiveLink for Solid Edge Solid Edge ST5 LiveLink for SolidWorks SolidWorks 2011, 2012 LiveLink for SpaceClaim SpaceClaim 2011+, 2012

7 A bidirectional Interface Transfer parameters to CAD program Transfer geometry to COMSOL COMSOL Multiphysics Updated geometry Parameters CAD program active CAD file

8 Automatic Parametric Sweep Physics settings retained in COMSOL model Automatic mesh Automatic solve Automatic result plots COMSOL Multiphysics Updated geometry Parameters CAD program active CAD file

9 Parameter Update Update, in both CAD assemblies and CAD parts, parameters that are COMSOL Multiphysics - User defined, or - Model generated Geometry Parameters Interactively link parameters in the CAD program to COMSOL* Top CAD assembly file Part 1 Sub-assembly 1 Part 1 Part 2 * Available with LiveLink for Creo Parametric, LiveLink for Inventor, LiveLink for Pro/ENGINEER, LiveLink for SolidWorks Part 2

10 One Window Interface Available with LiveLink for SolidWorks Create multiphysics models inside the SolidWorks user interface

11 File Import: Supported Formats Format Extension Version Parasolid.x_t,.x_b up to V25 SAT (ACIS ).sat,.sab up to R22 STEP.step,.stp AP203, AP214 IGES.igs,.iges up to 5.3 Autodesk Inventor part.ipt 6 11, Autodesk Inventor assembly * Needs license for File Import for CATIA V5.iam 11, Pro/ENGINEER.prt,.asm 16 to Wildfire 5.0 Creo Parametric.prt,.asm 1.0 SolidWorks.sldprt,.sldasm CATIA V5*.CATPart,.CATProduct R6 to R22

12 File Import Import solids, surfaces, curves, and points - Form solids from surfaces Length unit from CAD file or from COMSOL geometry Automatic repair during import - Healing gaps, removing spikes, short edges, slivers, etc. Location and type of errors in geometry reported after import

13 Dedicated Geometry Kernel Integration of the Parasolid kernel, which is one of the leading 3D modeling kernels Used by default with a license for the CAD Import Module or a LiveLink for CAD Product Enables defeaturing and repair of imported CAD geometry Enables combining imported geometry with geometry generated in COMSOL

14 Geometry Sequence Click on a node in the Model Builder to access and modify the settings for the geometry operations Enable or disable geometry operations in the sequence Delete operations or insert new ones Fully parameterized geometries

15 Defeaturing and Repair

16 CAD Repair Perform after import of CAD files - Repair similar to the automatic repair during import - Knit to solid heals gaps to create closed surfaces or solids Heal gap and create solid

17 Defeaturing tools Interactively search for and remove - Fillets - Small faces - Sliver faces - Spikes - Short edges Delete Fillets

18 Delete Sliver Faces Remove face and extend other faces to fill gap

19 Delete Faces Select faces to be deleted Use to remove holes Use to remove larger features from the geometry Faces are deleted and the wound is healed by growing surrounding faces

20 Detach Faces Select faces to be detached into a new solid object Use to create a solid for fluid calculation in a channel or hole Use to create a domain to apply different materials Faces are detached into separate objects. New faces are created by growing surrounding faces.

21 Cap Faces Select edges to form new faces on solid or surface objects Use to create a domain for fluid calculation in a channel or hole Use to create a domain to apply different materials Use to close a surface object and create a solid

22 Virtual Geometry and Mesh Control Operations

23 Virtual Geometry Operations Complements defeaturing and repair operations Hides geometry features from the mesher Use to get rid of Sliver faces Short edges Small faces Undesired surface partitioning Small domains due to overlapping solids Difference from defeaturing Works on the finalized geometry that is seen by the mesher Keeps the underlying surface curvature

24 Mesh Control Operations Gain precise control over mesh layout and density in regions of known rapid changes or steep gradients, which may occur for example in CFD simulations Selected geometry features are available exclusively to control local mesh properties and do not affect the subdivision of edges, faces, or domains when applying physics settings Domain for mesh control in benchmark model of turbulent flow field around a car-like object

Creo Elements/Direct CAD Interfaces

Creo Elements/Direct CAD Interfaces Data Sheet Creo Elements/Direct CAD Interfaces Bi-directional CAD data exchange between Creo Elements/Direct Modeling, Creo Elements/Direct 3D Access and other CAD systems With the Creo Elements/Direct

More information

Technology Update: Workbench, Geometry, Meshing, Workflow. ANSYS Users Group Meeting Prague, 2011

Technology Update: Workbench, Geometry, Meshing, Workflow. ANSYS Users Group Meeting Prague, 2011 Technology Update: Workbench, Geometry, Meshing, Workflow ANSYS Users Group Meeting Prague, 2011 1 Andreas Kolms Hannover 2 Agenda Workbench Geometry Meshing Workflow 3 The Path to Robust Design Optimization

More information

IronCAD s Hyper-Operability. IRONCAD TRANS Translators & Data Sharing

IronCAD s Hyper-Operability. IRONCAD TRANS Translators & Data Sharing With IronCAD s Design Collaboration Suite, engineers communicate more freely. Dual ACIS and Parasolid kernels allow precise, error-free import and export of native SAT and _T files as well as common file

More information

CoCreate OneSpace.net 3D CAD Conversion

CoCreate OneSpace.net 3D CAD Conversion CoCreate 3D This document contains the individual conversion specifications Table of Contents CATIA V4 4.2 to conversion Unigraphics NX2 to conversion Pro/E Wildfire to conversion I-DEAS MS10 to conversion

More information

Comsol Multiphysics. Installation Guide VERSION 4.4

Comsol Multiphysics. Installation Guide VERSION 4.4 Comsol Multiphysics Installation Guide VERSION 4.4 COMSOL Installation Guide 1998 2013 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; 7,623,991; and 8,457,932. Patents pending. This Documentation

More information

Autodesk Inventor for Experienced 3D CAD Users

Autodesk Inventor for Experienced 3D CAD Users Autodesk Inventor for Experienced 3D CAD Users Course Length: 3 days The Autodesk Inventor for Experienced 3D CAD Users training course is intended to provide accelerated introductory training in the Autodesk

More information

COMSOL Multiphysics. Installation Guide

COMSOL Multiphysics. Installation Guide COMSOL Multiphysics Installation Guide COMSOL Multiphysics Installation Guide 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991;

More information

Introduction to Comsol Multiphysics

Introduction to Comsol Multiphysics Introduction to Comsol Multiphysics VERSION 4.2a Benelux COMSOL BV Röntgenlaan 37 2719 DX Zoetermeer The Netherlands +31 (0) 79 363 4230 +31 (0) 79 361 4212 info@comsol.nl www.comsol.nl Denmark COMSOL

More information

LiveLink for Matlab. User s Guide VERSION 4.3

LiveLink for Matlab. User s Guide VERSION 4.3 TM LiveLink for Matlab User s Guide VERSION 4.3 LiveLink for MATLAB User s Guide 2009 2012 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; and 7,623,991. Patents pending. This Documentation and

More information

COMSOL Multiphysics. Installation Guide

COMSOL Multiphysics. Installation Guide COMSOL Multiphysics Installation Guide COMSOL Multiphysics Installation Guide 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991;

More information

PTC Creo Elements/Direct Modeling Express

PTC Creo Elements/Direct Modeling Express Modeling Express Edition Comparison Chart Learn how upgrading to 19.0, the leading direct 3D CAD design software, can deliver faster design cycles and responsiveness to change throughout your design process.

More information

COMSOL Server. Manual

COMSOL Server. Manual COMSOL Server Manual COMSOL Server Manual 1998 2014 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; and 8,457,932. Patents pending.

More information

ANSYS Computing Platform Support. July 2013

ANSYS Computing Platform Support. July 2013 ANSYS Computing Platform Support July 2013 1 Outline Computing platform trends and support roadmap Windows Linux Solaris ANSYS 14.5 Platform Support By application Other Platform Related Issues MPI and

More information

COMSOL Server. Manual

COMSOL Server. Manual COMSOL Server Manual COMSOL Server Manual 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; 8,457,932; and 8,954,302. Patents

More information

IM10202 Using the New Geometry and Meshing Tools in Autodesk CFD

IM10202 Using the New Geometry and Meshing Tools in Autodesk CFD IM10202 Using the New Geometry and Meshing Tools in Autodesk CFD Heath Houghton Autodesk Learning Objectives Learn how to use the Model Assessment Toolkit in Autodesk CFD 2016 Learn key functionality in

More information

Introduction to CAD. What Do Those Letters Mean to You? MAE 455 Computer-Aided Design and Drafting

Introduction to CAD. What Do Those Letters Mean to You? MAE 455 Computer-Aided Design and Drafting Introduction to CAD What Do Those Letters Mean to You? Painting The Big Picture What is Computer-Aided Design (CAD)? 2 The Design Process What is Computer-Aided Design (CAD)? 3 More Specific Definitions

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

ANSYS Computing Platform Support. June 2014

ANSYS Computing Platform Support. June 2014 ANSYS Computing Platform Support June 2014 1 Outline Computing platform trends and support roadmap Windows Linux ANSYS 15.0 Platform Support By application Other Platform Related Issues MPI and Interconnect

More information

3397 American Drive, Unit # 1 Mississauga, Ontario. L4V 1T8 Phone: 905 672 9328 Fax: 905 672 2706

3397 American Drive, Unit # 1 Mississauga, Ontario. L4V 1T8 Phone: 905 672 9328 Fax: 905 672 2706 Contact: Robert C. Lansdale Okino Computer Graphics, Inc. Phone 905 672 9328 lansd@okino.com 3397 American Drive, Unit # 1 Mississauga, Ontario. L4V 1T8 Phone: 905 672 9328 Fax: 905 672 2706 Okino Computer

More information

System Requirements G E N E R A L S Y S T E M R E C O M M E N D A T I O N S

System Requirements G E N E R A L S Y S T E M R E C O M M E N D A T I O N S System Requirements General Requirements These requirements are common to all platforms: A DVD drive for installation. If you need to install the software using CD-ROM media, please contact your local

More information

Version 4.1 Release Notes. Release notes for 3D PDF Converter detailing new features, bug fixes and updated format support.

Version 4.1 Release Notes. Release notes for 3D PDF Converter detailing new features, bug fixes and updated format support. Version 4.1 Release Notes Release notes for 3D PDF Converter detailing new features, bug fixes and updated format support. Table of Contents OVERVIEW... 2 Version Information... 2 Language Support Overview...

More information

2.1 CAD Access Support Updates

2.1 CAD Access Support Updates 20 2.1 CAD Access Support Updates The InterOp translators have been upgraded to InterOp R13 and ACIS R13. The I-DEAS to MSC.Patran translator must be run with I-DEAS 10 NX Series. I-DEAS 9.mf1 files can

More information

Your CAD Programme. Virtually all 3D Rapid Prototyping machines and 3D Printers use the STL file format for input.

Your CAD Programme. Virtually all 3D Rapid Prototyping machines and 3D Printers use the STL file format for input. Export STL Files From Your CAD Programme Introduction Virtually all 3D Rapid Prototyping machines and 3D Printers use the STL file format for input. Almost all CAD programs have a way to save or export

More information

Introduction to ANSYS

Introduction to ANSYS Lecture 3 Introduction to ANSYS Meshing 14. 5 Release Introduction to ANSYS Meshing 2012 ANSYS, Inc. March 27, 2014 1 Release 14.5 Introduction to ANSYS Meshing What you will learn from this presentation

More information

COMSOL Server. Manual

COMSOL Server. Manual COMSOL Server Manual COMSOL Server Manual 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; 8,457,932; 8,954,302; 9,098,106;

More information

Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study

Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study EVS28 KINTEX, Korea, May 3-6, 2015 Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study Boris Marovic Mentor Graphics (Deutschland) GmbH, Germany, boris_marovic@mentor.com

More information

MCADD COURSE STRUCTURE

MCADD COURSE STRUCTURE MCADD COURSE STRUCTURE S.No Course code Software used Duration Master Diploma in Product Design and Analysis 1 MCADD MD40 CATIA V5 +NX CAD +NX CAM +Ansys +PPM Concepts +MSP 2010 (mechanical)+gd & T 360

More information

FUJITSU Workstation CELSIUS ISV Certification Overview April 2015

FUJITSU Workstation CELSIUS ISV Certification Overview April 2015 FUJITSU Workstation CELSIUS ISV Certification Overview April 2015 ISV stands for Independent Software Vendor. ISVs are developing software applications for specific markets. Fujitsu is working with the

More information

Customer Training Material. Lecture 4. Meshing in Mechanical. Mechanical. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.

Customer Training Material. Lecture 4. Meshing in Mechanical. Mechanical. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved. Lecture 4 Meshing in Mechanical Introduction to ANSYS Mechanical L4-1 Chapter Overview In this chapter controlling meshing operations is described. Topics: A. Global Meshing Controls B. Local Meshing Controls

More information

PTC CREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks. PTC Creo Engineer Packages

PTC CREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks. PTC Creo Engineer Packages PTC CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to

More information

Coordinate Measuring Machines CAT-1000. Bulletin No. 2076. Computer Assisted Technology CAT-1000 Model Based Definition

Coordinate Measuring Machines CAT-1000. Bulletin No. 2076. Computer Assisted Technology CAT-1000 Model Based Definition Coordinate Measuring Machines CAT-1000 Bulletin No. 2076 Computer Assisted Technology CAT-1000 Model Based Definition CMM System Manager From the Part Manager the CMM System Manager allows rack positions

More information

CAD Model Validation in the Product Life Cycle Management

CAD Model Validation in the Product Life Cycle Management CAD Model Validation in the Product Life Cycle Management CAPVIDIA CEO Tomasz Luniewski BOEING is a trademark of Boeing Management Company. GPDIS_Template_2009.ppt 9/23/2009 1 Company Introduction Founded

More information

Benchmark Test Reveals Best CAD Tool for Assembly Performance

Benchmark Test Reveals Best CAD Tool for Assembly Performance Benchmark Test Reveals Best CAD Tool for Assembly Performance Speed is everything in product development, especially when it comes to creating and managing large assemblies. And while some 3D CAD vendors

More information

Customer Training Material. Shell Meshing Stamped Part ICEM CFD. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved. WS3.

Customer Training Material. Shell Meshing Stamped Part ICEM CFD. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved. WS3. Workshop 3.1 Shell Meshing Stamped Part Introduction to ANSYS ICEM CFD WS3.1-1 Create Project / Open Geometry File > New Project Enter the Stamping folder Type Stamped-mesh Save File > Geometry > Open

More information

FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH

FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH Entwurfswerkzeuge für elektrische Maschinen MACCON GmbH 09/04/2013 1 Flux software Modeling electromagnetic and thermal phenomena

More information

keytech keytech 13 FP 2 - What's New

keytech keytech 13 FP 2 - What's New keytech keytech 13 FP 2 - What's New keytech 13 - What's New Table of Contents 1. 1.1 1.2 1.3 1.3.1 1.3.1.1 1.3.1.2 1.3.2 1.3.2.1 1.3.2.2 1.3.2.3 1.3.2.4 1.3.3 1.3.4 1.4 1.4.1 1.4.2 1.5 1.6 Structured

More information

Course in ANSYS. Import + meshing issues. ANSYS Part 2 Computational Mechanics, AAU, Esbjerg

Course in ANSYS. Import + meshing issues. ANSYS Part 2 Computational Mechanics, AAU, Esbjerg Course in ANSYS Import + meshing issues Course Outline Introduction Lesson 1. Modeling reviewed Boolean s Lesson 2. Boolean s + meshing issues Lesson 3. Operate + meshing issues Lesson 4. Import + meshing

More information

TransMagic, Inc. 11859 Pecos Street Suite 310 Westminster, CO USA

TransMagic, Inc. 11859 Pecos Street Suite 310 Westminster, CO USA TransMagic, Inc. 11859 Pecos Street Suite 310 Westminster, CO USA Website: www.transmagic.com Email: info@transmagic.com Phone: +1.303.460.1406 Fax: +1.303.464.0929 CAD Translation Software Compatibility

More information

High Performance Business Management. Product Lifecycle Management Document Management System

High Performance Business Management. Product Lifecycle Management Document Management System High Performance Business Management Product Lifecycle Management Document Management System keytech Software GmbH The Key to Product Success keytech Software GmbH has been specializing in the optimization

More information

CastNet: GUI environment for OpenFOAM

CastNet: GUI environment for OpenFOAM CastNet: GUI environment for OpenFOAM CastNet is a preprocessing system and job-control system for OpenFOAM. CastNet works with the standard OpenFOAM releases provided by ESI Group as well as ports for

More information

Installation Guide. Installation Guide Edgecam 2014 R2 Page 1 of 34

Installation Guide. Installation Guide Edgecam 2014 R2 Page 1 of 34 Installation Guide This document contains information to help you install and start Edgecam. You will find information about system requirements, product installation and troubleshooting. To run Edgecam,

More information

Selecting the Best Approach to Teach 3D Modeling to Technical College Engineering

Selecting the Best Approach to Teach 3D Modeling to Technical College Engineering Paper ID #12358 Selecting the Best Approach to Teach 3D Modeling to Technical College Engineering Students Dr. Farzin Heidari, Texas A&M University, Kingsville c American Society for Engineering Education,

More information

3D REVERSE ENGINEERING SOFTWARE

3D REVERSE ENGINEERING SOFTWARE 3D REVERSE ENGINEERING SOFTWARE PRODUCT WORKFLOWS GEOMAGIC STUDIO WORKFLOW SCAN AND PROBE Collect 3D point cloud and probe data from physical objects to form the basis of the new 3D model. PROCESS Use

More information

INTRODUCTION TO Application Builder

INTRODUCTION TO Application Builder INTRODUCTION TO Application Builder Introduction to Application Builder 1998 2014 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; and

More information

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook 2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management

More information

High-end FEA pre/postprocessor

High-end FEA pre/postprocessor Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall

More information

Imported Files Turning Surfaces into Solids in SolidWorks

Imported Files Turning Surfaces into Solids in SolidWorks Imported Files Turning Surfaces into Solids in SolidWorks Problem Many times when you import a customer s part or assembly and it opens as a part that has a ton of surfaces or it may open as a multi level

More information

Autodesk Inventor Introduction to Solid Modeling

Autodesk Inventor Introduction to Solid Modeling Autodesk Inventor Introduction to Solid Modeling Course Length: 5 days The Autodesk Inventor Introduction to Solid Modeling training guide provides you with an understanding of the parametric design philosophy

More information

Chapter 1 What's New in Inventor 2013... 1

Chapter 1 What's New in Inventor 2013... 1 Contents Chapter 1 What's New in Inventor 2013................... 1 User Interface................................ 1 Help Experience........................... 1 Welcome screen............................

More information

CastNet: Modelling platform for open source solver technology

CastNet: Modelling platform for open source solver technology CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49

More information

ANSYS Meshing User's Guide

ANSYS Meshing User's Guide ANSYS Meshing User's Guide ANSYS, Inc. Southpointe 275 Technology Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 13.0 November 2010 ANSYS,

More information

CAD.TIMKEN.COM QUICK START GUIDE. Stronger. Value. Stronger. By Design.

CAD.TIMKEN.COM QUICK START GUIDE. Stronger. Value. Stronger. By Design. A D C CAD.TIMKEN.COM QUICK START GUIDE Stronger. Value. Stronger. By Design. 1 SEARCH YOUR QUICK START GUIDE TO CAD.TIMKEN.COM Go directly to cad.timken.com or visit timken.com and use the Quick Links

More information

f o r d e m a n d i n g C F D pre- & post-processing ANSA μετα p i o n e e r i n g software systems www.beta-cae.gr

f o r d e m a n d i n g C F D pre- & post-processing ANSA μετα p i o n e e r i n g software systems www.beta-cae.gr ANSA μετα p i o n e e r i n g software systems f o r d e m a n d i n g C F D pre- & post-processing TM www.beta-cae.gr ANSA with its powerful functionality provides high efficiency solutions for CFD applications.

More information

What s New SURFCAM 2014 R1 \ R2

What s New SURFCAM 2014 R1 \ R2 SURFCAM R1 \ R2 Contents General/System - R1 3 New InstallShield Wizard >>...3 SURFCAM - Recommended System Requirements >>...4 Utilities - R1 5 New Support Assistant >>...5 Functionality - R1 6 Improved

More information

Live Classroom Curriculum Guide

Live Classroom Curriculum Guide Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric from Creo Elements/Pro 5.0 Update to Creo Parametric from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric Advanced Modeling

More information

10.0-2. Finite Element Modeling

10.0-2. Finite Element Modeling What s New in FEMAP FEMAP 10.0 and 10.0.1 include enhancements and new features in: User Interface on page 3 Meshing on page 23 Mesh Associativity on page 33 Properties on page 33 Functions on page 35

More information

CAGILA 2D and 3D software

CAGILA 2D and 3D software CAGILA 2D and 3D software CAM-Service does present the new CAGILA 3D software. Beside all common data formats like STEP, IGES, VDAFS, CAGILA 3D also supports interfaces for popular native formats like

More information

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future . CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization

More information

ANSA. www.beta-cae.gr. quality and performance in automatic mesh generation. p i o n e e r i n g software systems

ANSA. www.beta-cae.gr. quality and performance in automatic mesh generation. p i o n e e r i n g software systems ANSA p i o n e e r i n g software systems quality and performance in automatic mesh generation courtesy of Dr. Ing h.c.f. Porsche AG TM www.beta-cae.gr quality and performance in automatic mesh generation

More information

WHY IS SOLIDWORKS FLOW SIMULATION THE RIGHT CHOICE FOR PRODUCT ENGINEERS?

WHY IS SOLIDWORKS FLOW SIMULATION THE RIGHT CHOICE FOR PRODUCT ENGINEERS? WHITE PAPER WHY IS SOLIDWORKS FLOW SIMULATION THE RIGHT CHOICE FOR PRODUCT ENGINEERS? Engineering Fluid Dynamics (EFD) is a new breed of Computational Fluid Dynamics (CFD) software that enables mechanical

More information

STL GENERATION INTRODUCTION TO STL. Written by Greta D Angelo

STL GENERATION INTRODUCTION TO STL. Written by Greta D Angelo STL GENERATION Written by Greta D Angelo In this section: An introduction on.stl files How to make good.stl files How to make.stl on different softwares (Solidworks, PTC Creo, Rhinoceros 5, Autodesk Inventor)

More information

Plastics made perfect

Plastics made perfect Plastics made perfect Validation and optimization of plastic parts Innovative plastic resins and functional plastic part designs are on the rise in almost every industry. Plastics and fiber-filled composites

More information

PTC Page 1 of 5. Figure 1: Distributed Pro/BATCH Architecture

PTC Page 1 of 5. Figure 1: Distributed Pro/BATCH Architecture Distributed Computing with Creo Elements/Pro Distributed Pro/BATCH White Paper Leverage your hardware and software resources to perform batch jobs over the network Executive Overview Distributed computing

More information

AFNeT STEP AP242 Benchmark

AFNeT STEP AP242 Benchmark e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The

More information

MultiCAx Products. encad consulting GmbH www.encad-consulting.de info@encad-consulting.de

MultiCAx Products. encad consulting GmbH www.encad-consulting.de info@encad-consulting.de MultiCAx Products www.encad-consulting.de info@encad-consulting.de Customer needs in Data Exchange 1. Exchange CAD data with subcontractors 2. Archive reference product data 3. Make design review with

More information

CATIA V5R21 - FACT SHEET

CATIA V5R21 - FACT SHEET CATIA V5R21 - FACT SHEET Introduction What s New at a Glance Overview Detailed Description INTRODUCTION CATIA V5 is the leading solution for product success. It addresses all manufacturing organizations;

More information

PARAMETRIC MODELING. David Rosen. December 1997. By carefully laying-out datums and geometry, then constraining them with dimensions and constraints,

PARAMETRIC MODELING. David Rosen. December 1997. By carefully laying-out datums and geometry, then constraining them with dimensions and constraints, 1 of 5 11/18/2004 6:24 PM PARAMETRIC MODELING David Rosen December 1997 The term parametric modeling denotes the use of parameters to control the dimensions and shape of CAD models. Think of a rubber CAD

More information

Troubleshooting IGES Files

Troubleshooting IGES Files Troubleshooting IGES Files with Rhinoceros Rhinoceros NURBS modeling for Windows Use Rhino to Troubleshoot IGES Files One powerful use of Rhino s file translation ability is to clean up poorly written

More information

Amazing renderings of 3D data... in minutes.

Amazing renderings of 3D data... in minutes. Amazing renderings of 3D data... in minutes. What is it? KeyShot is a standalone 3D rendering and animation application for anyone with a need to quickly and easily create photo-realistic images of 3D

More information

Laminar Flow in a Baffled Stirred Mixer

Laminar Flow in a Baffled Stirred Mixer Laminar Flow in a Baffled Stirred Mixer Introduction This exercise exemplifies the use of the rotating machinery feature in the CFD Module. The Rotating Machinery interface allows you to model moving rotating

More information

Successive robust design optimization of an electronic connector

Successive robust design optimization of an electronic connector Successive robust design optimization of an electronic connector Dirk Roos dynardo dynamic software and engineering GmbH Ralf Hoffmann & Thomas Liebl Tyco Electronics AMP GmbH Design for Six Sigma Six

More information

INTRODUCTION TO Application Builder

INTRODUCTION TO Application Builder INTRODUCTION TO Application Builder Introduction to Application Builder 1998 2016 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; 8,457,932;

More information

. Address the following issues in your solution:

. Address the following issues in your solution: CM 3110 COMSOL INSTRUCTIONS Faith Morrison and Maria Tafur Department of Chemical Engineering Michigan Technological University, Houghton, MI USA 22 November 2012 Zhichao Wang edits 21 November 2013 revised

More information

Calypso CAD Functions

Calypso CAD Functions Calypso CAD Functions The Basics & Beyond Jon Guimont Agenda The Basics o Programming from CAD Beyond o CAD Settings o Model Manipulation o Loading Multiple Models o Updating a Model o Creating Features

More information

Multiphysics Software Applications in Reverse Engineering

Multiphysics Software Applications in Reverse Engineering Multiphysics Software Applications in Reverse Engineering *W. Wang 1, K. Genc 2 1 University of Massachusetts Lowell, Lowell, MA, USA 2 Simpleware, Exeter, United Kingdom *Corresponding author: University

More information

Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih

Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih There is a new kid on the block in the arena of mechanical CAD technology, and that new kid has already formed a new paradigm

More information

Convert 2D to 3D in AutoPOL Bend Simulator

Convert 2D to 3D in AutoPOL Bend Simulator Convert 2D to 3D in AutoPOL Bend Simulator This document gives an introduction of how to convert 2D DXF/DWG files into 3D models in AutoPOL Bend simulator. The AutoPOL 3D concept A 3D model with correct

More information

Mold Tooling Design. CATIA V5 Mold Design. Training Curriculum

Mold Tooling Design. CATIA V5 Mold Design. Training Curriculum Mold Tooling Design CATIA V5 Mold Design Training Curriculum CATIA V5 Mold Design Training Curriculum The world is moving to CATIA V5 and the Mold tooling industry with its rapid engineering changes and

More information

FEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt

FEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt )($:(%$63 6WDNHKROGHU1HHGV,VVXH 5HYLVLRQ+LVWRU\ 'DWH,VVXH 'HVFULSWLRQ $XWKRU 04/07/2000 1.0 Initial Description Marco Bittencourt &RQILGHQWLDO DPM-FEM-UNICAMP, 2000 Page 2 7DEOHRI&RQWHQWV 1. Objectives

More information

COMSOL Multiphysics 4.3a

COMSOL Multiphysics 4.3a COMSOL Multiphysics 4.3a COMSOL Multiphysics 4.3a New 4.3 New4.3 New4.3 COMSOL, COMSOL Multiphysics, COMSOL Desktop, and LiveLink are registered trademarks or trademarks of COMSOL AB. AutoCAD and Inventor

More information

Lecture 7 - Meshing. Applied Computational Fluid Dynamics

Lecture 7 - Meshing. Applied Computational Fluid Dynamics Lecture 7 - Meshing Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Why is a grid needed? Element types. Grid types.

More information

CFD Analysis of Swept and Leaned Transonic Compressor Rotor

CFD Analysis of Swept and Leaned Transonic Compressor Rotor CFD Analysis of Swept and Leaned Transonic Compressor Nivin Francis #1, J. Bruce Ralphin Rose *2 #1 Student, Department of Aeronautical Engineering& Regional Centre of Anna University Tirunelveli India

More information

Model of a flow in intersecting microchannels. Denis Semyonov

Model of a flow in intersecting microchannels. Denis Semyonov Model of a flow in intersecting microchannels Denis Semyonov LUT 2012 Content Objectives Motivation Model implementation Simulation Results Conclusion Objectives A flow and a reaction model is required

More information

How SolidWorks Speeds Consumer Product Design

How SolidWorks Speeds Consumer Product Design white paper How SolidWorks Speeds Consumer Product Design inspiration SUMMARY SolidWorks Premium bridges the gap between industrial design and engineering by providing powerful surfacing capabilities,

More information

Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)*

Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)* 3D-Tool Version 12 - Specifications 3D-Tool is a professional CAD-Viewer for 3D-models and 2D-drawings. You do not need any special CAD skills to view models in 3D, to measure distances, angles, radii

More information

INTRODUCTION TO COMSOL Multiphysics

INTRODUCTION TO COMSOL Multiphysics INTRODUCTION TO COMSOL Multiphysics Introduction to COMSOL Multiphysics 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; 8,457,932;

More information

LSCFD: Meshing Tools for Open Source CFD A Practical Point of View

LSCFD: Meshing Tools for Open Source CFD A Practical Point of View LSCFD: Meshing Tools for Open Source CFD A Practical Point of View Juha Kortelainen Report: Meshing Tools for Open Source CFD A Practical Point of View LSCFD Tools for Large Scale

More information

Introduction to ANSYS ICEM CFD

Introduction to ANSYS ICEM CFD Workshop 8.2 3D Pipe Junction 14.5 Release Introduction to ANSYS ICEM CFD 2012 ANSYS, Inc. April 1, 2013 1 Release 14.5 3D Pipe Junction 3D Pipe Junction This is a simple 4-way pipe intersection with two

More information

ANSYS, Inc. Installation and Licensing Tutorials

ANSYS, Inc. Installation and Licensing Tutorials ANSYS, Inc. Installation and Licensing Tutorials ANSYS, Inc. Release 15.0 Southpointe November 2013 275 Technology Drive 000508 Canonsburg, PA 15317 ANSYS, Inc. is ansysinfo@ansys.com certified to ISO

More information

ME 521 Computer Aided Design. 1. Introduction to CAD

ME 521 Computer Aided Design. 1. Introduction to CAD Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for

More information

T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex

T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex design challenges. It unites powerful parametric 3D modeling

More information

Les clés de produit pour les produits Autodesk 2014

Les clés de produit pour les produits Autodesk 2014 Autodesk AutoCAD AutoCAD Architecture AutoCAD Civil 3D AutoCAD Design Suite Premium AutoCAD Design Suite Standard AutoCAD Design Suite Ultimate AutoCAD ecscad AutoCAD Electrical AutoCAD Inventor LT Suite

More information

Pro/ENGINEER Wildfire 4.0 Basic Design

Pro/ENGINEER Wildfire 4.0 Basic Design Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do

More information

Tutorials from CAD through CFD for Beginners

Tutorials from CAD through CFD for Beginners Tutorials from CAD through CFD for Beginners John M. Cimbala, Professor Keith A. Martin, Graduate student Scott A. Richards, Graduate student Department of Mechanical and Nuclear Engineering, The Pennsylvania

More information

Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD

Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD Meshing of a detailed DrivAer Body with ANSYS Meshing and ANSYS ICEM CFD Dipl.-Ing. (FH) Jan Smedseng CFX Berlin Software GmbH 030 293 811 41 Jan.Smedseng@cfx-berlin.de Contents DrivAer Body Geometry preparation

More information

Windchill PDMLink 10.1. Curriculum Guide

Windchill PDMLink 10.1. Curriculum Guide Windchill PDMLink 10.1 Curriculum Guide Live Classroom Curriculum Guide Update to Windchill PDMLink 10.1 from Windchill PDMLink 9.0/9.1 Introduction to Windchill PDMLink 10.1 for Light Users Introduction

More information

pattern, and work features For automating printing process For translation of data to various formats

pattern, and work features For automating printing process For translation of data to various formats Updating Using Autodesk Inventor to Release 5 Appendix R5 1 Introduction Chapter 1 outlines the concepts of parametric solid modeling, assembly modeling, and engineering drafting. It also provides a brief

More information

DWFTM. Tips &Tricks. Publish View & Print Review & Mark Up

DWFTM. Tips &Tricks. Publish View & Print Review & Mark Up DWFTM Tips &Tricks Publish View & Print Review & Mark Up Sharing complex design information has never been easy. Since design files are large, sending sheet sets and 3D models to printers or sharing work

More information

Solved with COMSOL Multiphysics 4.3

Solved with COMSOL Multiphysics 4.3 Vibrating String Introduction In the following example you compute the natural frequencies of a pre-tensioned string using the 2D Truss interface. This is an example of stress stiffening ; in fact the

More information

INTRODUCTION TO COMSOL Multiphysics

INTRODUCTION TO COMSOL Multiphysics INTRODUCTION TO COMSOL Multiphysics Introduction to COMSOL Multiphysics 1998 2015 COMSOL Protected by U.S. Patents listed on www.comsol.com/patents, and U.S. Patents 7,519,518; 7,596,474; 7,623,991; 8,457,932;

More information