AIR CHUCKS, TIRE AND INFLATOR GAUGES
|
|
- Samuel Gibson
- 7 years ago
- Views:
Transcription
1
2 THE IMPORTANCE OF PROPER TIRE INFLATION S Tire pressure has a direct influence on tire life. When inflated to manufacturers recommendations, tires will provide optimal performance; on the other hand, incorrect inflation will cause abnormal and/or premature wear. While overinflation causes certain damage, this wear is even more pronounced for underinflation, not to speak of increased gas consumption. Maximum allowable pressure is usually indicated on the sidewall of the tire; as a rule, pressures for automobile tires should be around 35 PSI, compared to racing bicycles, for example, which use roughly 120 PSI. Under-inflation Pressure Tire Life -20% 75% -30% 50% -40% 35% INFLATION AND WEAR... Over-inflation Pressure Tire Life +20% 90% It is recommended that tire pressure be checked once per month and/or before any long trip, both for safety reasons and to reduce tire wear and gas consumption. TOPRING offers 4 different types of tools for checking tire pressure: Pencil-type tire gauges Dial tire gauges Digital tire gauges Inflator gauges TECH TIP All TOPRING air chucks, tire gauges and inflator gauges are compatible with Nitrogen used to inflate tires Dial inflator gauges make maintaining ideal tire pressure very easy. TOPRING 391
3 STOPRING STANDARD AIR CLOSED CHUCKS These chucks have a built-in shut off valve to stop airflow when chuck is not in use TECH TIP BALL FOOT AIR CHUCKS Description.130 1/4 (F) NPT.133 1/4 Hose Barb DUAL FOOT AIR CHUCK Closed Chuck Length: 6" Angled head can inflate either side Extended chuck for hard-to-reach tire valves, (ie: trucks, buses, and tractors) Closed chucks are intended for use on live air lines. They are not intended for inflator gauges or tire installation machines, which control air flow with levers and valves and require flow-thru chucks (see following page) Description.140 1/4 (F) NPT.135 1/4 (M) NPT.137 1/4 INDUSTRIAL.138 ARO ULTRAFLO EXTENDED DUAL FOOT AIR CHUCK Length: 13" Extra long for hard-to-reach tire valves, ie: trucks, buses, and tractors BALL FOOT AIR CHUCK AND CLIP Locks onto tire valve while inflating tire Description.110 1/4 (F) NPT AIR CHUCK CLIP Locks chuck onto valve while inflating tire Description.120 1/4 (F) NPT TILT LOCK DUAL FOOT CHUCK Length: 6" Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted EXTENDED TILT LOCK DUAL FOOT CHUCK Description.150 1/4 (F) NPT Description.160 1/4 (F) NPT Extra long (14") for hard-to-reach tire valves Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted LOCK-ON AIR CHUCK Securely locks onto valves when pushed forward. Allows serviceman to stand clear for tire inflation Releases when pulled back Description.100 1/4 (F) NPT.245 Dual Foot Lock-On Chuck DUAL FOOT LOCK-ON AIR CHUCK Description.170 1/4 (F) NPT Description.245 1/4 (F) NPT 392
4 FLOW-THRU AIR CHUCKS Open Chuck Without shut off valve For inflation gauges and tire installation machines Open Chuck S TECH TIP Open chucks are intended for use on valved air lines, such as those found on inflation gauges and tire machines. They are not intended for live air lines, as air will flow freely through them once pressurized (see preceding page for closed chucks) CLIP-ON AIR CHUCK Firmly locks onto valve Description.205 1/4 hose barb BALL FOOT AIR CHUCK AND CLIP Locks onto valve DUAL FOOT AIR CHUCK 6" long For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.210 1/4 (F) NPT Description.240 1/4 (F) NPT HEX BALL FOOT AIR CHUCK Description.230 1/4 (F) NPT EXTENDED DUAL FOOT AIR CHUCK 13" long For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.250 1/4 (F) NPT TOPRING 393
5 STOPRING STANDARD TIRE GAUGES PENCIL TYPE FEATURES All pencil type tire gauges have a precision-engineered Brass chuck to ensure gauge fits squarely on the valve. This prevents air leakage and guarantees accurate pressure readings Easy to read and use All gauges have a permanent deflating pin to release excess air All models have a tough, Chrome plated finish All models use a 4-sided indicator bar for easy pressure readings Chuck Permanent deflating pin to allow release of excess air STANDARD TIRE GAUGE Dual calibration in PSIand kpa 2 sides calibrated from 5 to 50 PSI in 1 PSIincrements 2 sides calibrated from 75 to 340 kpa Ideal for automobiles and light trucks TRACTOR AIR/LIQUID TIRE GAUGE Stainless Steel spring Calibrated from 5 to 50 PSI in 1 PSIincrements Specially designed for air or liquid filled tires MINI TIRE GAUGE Compact size Calibrated from 10 to 50 PSI in 1 PSIincrements Ideal for automobiles and light trucks STRAIGHT CHUCK TIRE GAUGE Calibrated from 10 to 50 PSI in 1 PSIincrements Ideal for automobiles and light trucks c HIGH-PRESSURE TIRE GAUGE 2 sides calibrated from 20 to 120 PSI in 2 PSIincrements 2 sides calibrated from 150 to 820 kpa High pressure bicycle and motorcycles tires.410c 394 EXTRA-LOW PRESSURE TIRE GAUGE Specially designed for applications requiring accurate low pressure readings Calibrated from 1 to 20 PSI in 1/2 PSIincrements All terrain vehicles, air lifts, garden tractors, air shocks, etc..460c
6 DUAL FOOT TIRE GAUGES FOR TRUCKS AND BUSES FEATURES All dual foot truck tire gauges have precision-engineered Brass chuck guides to ensure gauge fits squarely on the valve This prevents air leakage and guarantees accurate pressure readings All models have a tough, Chrome plated finish HIGH-PRESSURE DUAL FOOT TIRE GAUGE (PENCIL TYPE) 4-sided Nylon indicator bar Calibrated from 20 to 120 PSIin 2 PSIincrements DUAL FOOT SERVICE TIRE GAUGE (NYLON BAR) Constructed for high pressure applications, especially suited for heavy duty environments 2-sided Nylon indicator bar Calibrated from 10 to 150 PSIin 2 PSIincrements, numbers at 10 PSIintervals with 5 PSImarkers between 6" extension to reach inside and outside wheels 12" long.500c.540 S DUAL FOOT SERVICE TIRE GAUGE (ALUMINIUM BAR) 2-sided Aluminium indicator bar Calibrated from 10 to 160 PSIin 2 PSIincrements, numbers at 10 PSI intervals with 5 PSImarkers between 6" extension to reach inside and outside wheels 12" long DUAL STRAIGHT CHUCK SERVICE TIRE GAUGE 2-sided Nylon indicator bar Straight-on chuck head with a 30 reverse angle chuck for inside and outside tandem wheels Calibrated from 10 to 150 PSIin 2 PSIincrements 12" long MASTER TEST PRESSURE TIRE GAUGE All tire gauges can eventually become inaccurate and contaminated. Checking gauges annually with the Master gauge assures gauge accuracy Designed and calibrated to the highest degree of accuracy Calibrated from 10 to 165 PSIin 2 PSIincrements, with numbers at 10 PSIintervals with 5 PSImarkers between Nylon indicator bar THIS INSTRUMENT IS NOT INTENDED FOR REGULAR CHECKING OF TIRES.580 TOPRING 395
7 STOPRING DIAL TIRE GAUGES FEATURES Durable Steel case with polished Brass bezel and 2" dial Designed to stay accurate Excellent for all types of passenger vehicles Full geared, solid Brass precision movement with Bronze bourdon tube. Unlike piston-plunger-type gauges, bourdon tube is not affected by changes in temperature, humidity or altitude Pressure readings are held until the release button is depressed Bleeder button also releases excess air to exact desired pressure Include protective Rubber gauge guard STRAIGHT CHUCK SWIVEL ANGLE CHUCK Air Chuck.590 Straight (0-60 PSI) Air Chuck.582 Swivel angle (0-160 PSI) DUAL FOOT CHUCK Air Chuck.583 Dual Foot (5-160 PSI) STRAIGHT CHUCK (WITH FLEXIBLE HOSE) 11" hose for hard-to-reach tire valves Air Chuck.589 Straight (2-60 PSI) 396
8 MAXPRO DIGITAL TIRE GAUGE S Reads from 2 to 100 PSI Displays in increments of 0.5 PSI Calibration in PSI, bar, kpa, and kg/cm 2 Auto shut off Digital accuracy of ± 1% Backlit LCD display for easy reading Replaceable battery Streamlined ergonomic shape Lightweight and compact size.0 DIGITAL TIRE GAUGES Read from 2 to 150 PSI Display in increments of 0.5 PSI Calibration in PSI, bar, kpa, and kg/cm 2 Auto shut off Digital accuracy of ± 0.5 PSI Backlit LCD display for easy reading Replaceable battery Streamlined ergonomic shape Lightweight and compact size Chuck.640 Angle Chuck.642 Dual Foot TOPRING 397
9 STOPRING DIGITAL LEVER-TYPE INFLATOR GAUGE BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use Long inflation hose and Clip-On chuck allow user to keep a safe distance from tire SAFE FEATURES High speed inflation and deflation rates Large, easy to read backlit LCD digital display Calibrated from 0 to 100 PSIin 0.1 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Large, separate backlight and reset buttons Gauge encased in a Rubber cushion for long lasting service 6' flexible hose with Clip-On chuck 250 PSIoverpressure warning Low battery warning light SPECIFICATIONS Maximum Inlet Pressure 250 PSI Working Temperature Range 32 F to 176 F (0 C to 80 C) Air Inlet 1/4 (F) NPT Battery Type CR2450 Weight 3.3 lb (1.5 kg) 398 Prod. No Description.660 Digital Tire Inflator Gauge
10 COMPACT DIGITAL LEVER-TYPE INFLATOR GAUGE S BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use FEATURES Large, easy to read LCD digital display Calibrated from 2 to 150 PSIin 0.5 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Heavy duty cast handle encased in oil-resistant Rubber cover Gauge encased in an oil resistant Rubber cushion for long lasting service 48" flexible hose with Clip-On chuck SPECIFICATIONS Maximum Inlet Pressure 150 PSI Working Temperature Range 32 F to 104 F (0 C to 40 C) Air Inlet 1/4 (F) NPT Batteries Type CR2032 Hose Prod. Length Air No in Chuck Clip-On Replacement gauge PISTOL GRIP DIAL INFLATOR GAUGES Excellent all-purpose inflation gauge Air pressure may be set without touching tire or valve core 3-in-1 function: inflates, releases air and measures tire pressure Rugged Brass body Large, easy-to-read 2" dial gauge calibrated PSI(0-15 bar) Gauge encased in a Rubber cushion for long lasting service 12" or 48" flexible hose With Clip-On.669 With Clip-On Hose Prod. Length Air No in Chuck Dual Foot Clip-On Clip-On.666 Replacement Gauge TOPRING 399
11 STOPRING STRAIGHT AIR CHUCK LEVER TYPE BAYONET INFLATOR GAUGE 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Small straight chuck Calibrated PSI in 2 PSIincrements 12" flexible hose Air chuck.600 Straight LEVER TYPE BAYONET INFLATOR GAUGES 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Calibrated PSIin 2 PSI increments 12" flexible hose.602 Ball Foot Chuck.601 Air Chuck.601 Dual Foot.602 Ball Foot LEVER TYPE WINDOW INFLATOR GAUGE Heavy-duty gauge for passenger and truck tires 3-in-1 function: inflates, and measures tire pressure Easy-to-read accuracy magnifying lens window Thin-line indicator ring allows full view of scale calibrated PSIin 2 PSI increments (0-11 bar) 15" flexible hose with dual foot chuck Magnifying Lens Window Air Chuck.658 Dual Foot LEVER TYPE DIAL INFLATOR GAUGE 400 Excellent all-purpose inflation gauge 3-in-1 function: inflates, releases air and measures tire pressure Large, easy-to-read 2" dial gauge calibrated PSI Gauge encased in a Rubber cushion for long lasting service 12" flexible hose with Brass ball foot air chuck Air Chuck.659 Ball Foot.666 Replacement Gauge.668 Replacement Hose
12 AIRPRO INFLATOR GAUGES Allow user to keep a safe distance while inflating or deflating tires Long extension allows user to work standing up (diminishing back injuries) Integrated valve allows slow release of tire pressure to desired level Rugged construction for everyday use TECH TIP Safety regulations require the operator to stay out of the way of inflating tires, which may explode. The 6' hose of these inflators allow the operator to stay out of harm s way S AIRPRO DUAL FOOT INFLATOR GAUGE (WITH SAFETY LOCK-ON AIR CHUCK) Maximum working pressure: 120 PSI Excellent all-purpose inflation gauge Large, easy-to-read 2" dial gauge calibrated PSI(0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with safety lock-on air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.652 Lock-On.671 Replacement Gauge.672 Rubber Protector AIRPRO PROFESSIONAL CLIP-ON CHUCK INFLATOR GAUGE Equiped with a valve ensuring that gauge will only be exposed to the pressure from tire. This protects the gauge from unnecessary pressure surges and shocks Excellent all-purpose inflation gauge Large, easy-to-read 2-1/2" dial gauge calibrated PSI(0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.645 Clip-On.673 Replacement Gauge TOPRING 401
13 STOPRING AIRPRO INFLATOR GAUGES Accurate inflation Will both inflate and deflate Dial gauge Perfect for everyday use Release valve allows bleeding to exact tire pressure desired TECH TIP Correct tire pressure means increased car safety and performance, better fuel economy and longer tire life AIRPRO CLIP-ON CHUCK INFLATOR GAUGE Maximum working pressure: 120 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated PSI(0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.651 Clip-On.671 Replacement Gauge.672 Rubber Protector.682 Replacement Hose AIRPRO DUAL FOOT INFLATOR GAUGE Maximum working pressure: 145 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated PSI(0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 18" flexible hose with dual foot air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.653 Dual Foot.671 Replacement Gauge.672 Rubber Protector 402
14 TIRE SERVICE TOOLS TIRE TREAD DEPTH GAUGE S A handy tool that quickly and accurately tells how much tire tread is left on the tire Calibrated in 1/32" units and millimeters Convenient pocket clip.700 TIRE VALVE REPAIR TOOL Repairs inside and outside valve threads, inserts and removes cores from valves Corrosion-resistant finish Case hardened.900 VALVE CORE EXTRACTOR For inserting and removing tire valve cores Safety-grip handle with case-hardened and plated core 4-3/8" long.930 TIRE VALVE INSTALLATION TOOL Installs any length tubeless tire valve in any rim.955 TOPRING 403
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationSUPERYACHT SPARES. Nozzles and portable monitors. www.superyachtspares.com / info@superyachtspares.com / +31 183 639193
Nozzles and portable monitors Rosenbauer - Nozzles and portable monitors EN Maximum extinguishing effect. Minimal water consumption. The Rosenbauer nozzle enables the manual adjustment of the water flow
More informationAIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationPneumatic Tires. Specialist Tires for Maximum Efficiency
Pneumatic Tires Specialist Tires for Maximum Efficiency Radial Pneumatic Tires from Continental Continental Industrial Pneumatic Tires provide comfort on all surfaces and therefore offer the protection
More informationMichelin User Guide. Hi-power Rapid Tyre Inflator
12262 Michelin User Guide Hi-power Rapid Tyre Inflator Thank you for purchasing the Michelin High-power Rapid Tyre Inflator. Please read the operating instructions carefully before using your tyre inflator.
More informationtire inflator with pressure gauge
tire inflator with pressure gauge Model 95583 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks
More informationWheel Accessory Products Catalog
Wheel Accessory Products Catalog Table of Contents Heavy Duty Trucks - Chrome Accessories One-Piece Hub Cover System...2 Alcoa Wheel Kits...3-4 Alcoa Hug-A-Lug Nut Covers...5-6 Heavy Duty Trucks - Maintenance
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationFUEL SYSTEMS OUR PARTS PUT YOU IN THE PASSING LANE. Protect your fuel system. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE FUEL SYSTEMS Protect your fuel system. Velvac offers a wide range of locking fuel caps and anti-siphon tubes to keep unlawful occurances at bay. With OEM approved
More informationSingle Deadman 150 psi (10.3 bar) Air Lifting Bag (ALB) Controller
Specifications Single Deadman 150 psi (10.3 bar) Air Lifting Bag (ALB) Controller Introduction These purchase specifications cover the minimum requirements of a Single Deadman Air Lifting Bag (ALB) Controller
More informationRV TIRE MAINTENANCE AND INFLATION TIPS
RV TIRE MAINTENANCE AND INFLATION TIPS PROTECTING YOUR INVESTMENT ON THE ROAD Maintaining proper air pressure in RV tires is the best way to enhance tread life and overall performance. Improper tire inflation
More informationTECHNICAL BULLETIN. Meritor WABCO Cab Leveling Valves and Chassis Leveling Valves. How the Cab Leveling and Chassis Leveling Valves Work
Revised 02-00 TECHNICAL BULLETIN Meritor WABCO Cab Leveling Valves and Chassis Leveling Valves This technical bulletin covers both cab and chassis leveling valves manufactured by Meritor WABCO. While the
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationACCESSORY PRODUCTS CATALOG. Driving Your Bottom Line.
ACCESSORY PRODUCTS CATALOG Driving Your Bottom Line. Table of Contents Heavy Duty Trucks - Chrome Accessories One-Piece Hub Cover System...2 Alcoa Wheel Kits...3-5 Alcoa Hug-A-Lug Nut Covers...5-6 Wheel
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationCHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationMODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More informationPowers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
More informationWHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU!
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU! Atlanta (Monroe) GA 770-267-3787 gpm@gpmhydraulic.com www.gpmhydraulic.com What You Don t Know About Hydraulic Accumulators Can Kill You TABLE OF CONTENTS
More informationBUGGY SETUP GUIDE. Volume GOKARTSUSA GY6 150, CN250. Buggy Setup Guide
BUGGY SETUP GUIDE Volume 1 GOKARTSUSA GY6 150, CN250 Buggy Setup Guide GY6 150, CN250 DUNE BUGGY Buggy Setup Guide GOKARTSUSA.COM 2000 Highway 50 S. Lake Tahoe, CA 96150 Phone 800.603.1437 2 Table of Contents
More informationSECUREPAK DIGITAL TORQUE TESTER
SECUREPAK DIGITAL TORQUE TESTER Overview: The SecurePak Torque Tester is used to test and measure applied torque. The system firmware includes functions to automatically zero the unit when no torque is
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationBefore installation it is important to know what parts you have and what the capabilities of these parts are.
INSTALLATION GUIDE Before installation it is important to know what parts you have and what the capabilities of these parts are. The Recon XZT is the smallest and most powerful gauge of its kind. With
More informationHYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
More informationMONITOR SECTION INDEX
MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior - 3... E6 SharpShooter
More informationHVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD
HVAC/R GAS TEST GAUGE Hex or Bell Type mounting 5 to00 Psi pressure ranges Steel case and brass internals Use to pressure test all new gas installations for leaks and passing inspection codes. After installing
More information400B SERIES DIAPHRAGM PUMP
400B SERIES DIAPHRAGM PUMP In today s agricultural and industrial markets, isn t it good to know that you can rely on one name Sotera to fit your chemical transfer needs? The Sotera 400B Series offers
More informationPenetration. www.koehlerinstrument.com. www.koehlerinstrument.com. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationSOLFRUNT Pressure Gauges and Other Products for the Process Industries
A1 SOLFRUNT Pressure Gauges and Other Products for the Process Industries AMETEK s line of high quality process gauges are specifically designed to meet the demanding needs of the chemical and petroleum
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationProfessional HEX Tools Inch & Metric
Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationTire Safety for Passenger Vehicles and Light Trucks
Hanover Risk Solutions Tire Safety for Passenger Vehicles and Light Trucks Properly maintained tires improve the steering, stopping, traction, and load-carrying capability of vehicles. Underinflated and
More informationFloat and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationA revolutionary new grease gun
A revolutionary new grease gun The Lincoln Power-Luber grease gun family 12.0 volt 7.2 volt 3.6 volt LUBRICATES ANYTHING, ANYTIME, ANYWHERE. L U B R I C A T E S A N Y T H I N G, 12 volt Cordless Rechargeable
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationDiscPlus DX195 and DX225 Air Disc Brakes
Revised 11-04 Technical Bulletin Revised 1 Technical 11-04 Bulletin DiscPlus DX195 and DX225 Air Disc Brakes Inspection, Installation and Diagnostics Air Disc Brake Inspection Intervals and Procedures
More informationROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #
More informationRating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
More informationD I G I T A L C L A M
T h e M A X X P r e s s D I G I T A L C L A M O P E R A T O R S M A N U A L 6 x0 x5 5 x5 Folie & Papper Sweden AB Box 90 00 9 Göteborg Telefon 03-9 00 80 Fax 03-9 00 89 www.foliepapper.se Safety Instructions
More informationCode of Practice for the Manual Handling of Gas Cylinder and exchange of regulators
Code of Practice for the Manual Handling of Gas Cylinder and exchange of regulators General information The Manual Handling Operations Regulations 1992 (updated 1998) came into force in January 1993. The
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More information15GAL STEEL OIL DRAIN WITH 110V PUMP
15GAL STEEL OIL DRAIN WITH 110V PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationRIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationConnect. Cable preparation and cutting tools
Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic
More informationHow To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
More informationCONGRATULATIONS! TABLE OF CONTENTS. 1 Safety Warnings 2 About Your Wheels 3 Setting Up Your Wheels 7 Care and Cleaning 8 Warranty
WHEEL MANUAL CONGRATULATIONS! Congratulations on your purchase of Oval Concepts Wheels. Developed to perform at a high level, it is important that you follow the operation and maintenance instructions
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationFuel Injection Pump, Rotary (005-014)
Fuel Injection Pump, Rotary View Related Topic Page 1 of 30 Fuel Injection Pump, Rotary (005-014) Table of Contents Summary General Information Preparatory Steps Remove Front Gear Train Rear Gear Train
More informationNew Frontier Utility Disc Harrows
New Frontier Utility Disc Harrows 4-foot to 8-foot working widths R u g g e d. R e l i a b l e. R e a d y. Looking for an economical way to work your land? Then look no further than the Frontier Utility
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationPart No. Quantity Description Diameter Length
PUSHRODS SMALL BLOCK CHEVROLET SWEDGED END PUSHRODS.080 WALL 1010 STEEL 3 Heat treated and black oxide finish 3 For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and
More informationWIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationUsed Fluid Handling Portable Used-Oil Gravity Drains
Portable Used-Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More information123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com
123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com INTRODUCTION The purpose of this manual is to assist you in the assembly, operation and maintenance of your sprayer
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationTires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing
ommon Tire Terms Section : Aspect Ratio: Range: Overall Diameter: Static Radius: Design : width of a tire in millimeters measured on a rim with optimal width. A dimensional relationship of the tire s section
More informationINSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationFJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationCommercial / HVAC / Plumbing. Specification Guide. For. Pressure & Temperature Instruments & Related Accessories
Commercial / HVAC / Plumbing Specification Guide For Pressure & Temperature Instruments & Related Accessories Prepared for Consultant, Design & Specification Engineers Gauges Contractor Gauge (PCT, PCT-LF)
More informationINSTALLATION MANUAL MODEL RP-100
INSTALLATION MANUAL FOR 24 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 2003 THROUGH 2004.5 MODEL RP-100 READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION 5400 BUSINESS 50 WEST SUITE 8 573 635-0555
More informationTIRE & TUBE SECTION DEFINITIONS: OVERALL WIDTH SECTION HEIGHT (D) OVERALL DIAMETER (A) SECTION WIDTH (B) NOMINAL RIM DIAMETER (C)
TIRE & TUBE SECTION Knowing some basic facts about tire dimensions and sizes along with a few technical aspects of tire construction can help clear up much of the confusion many people have in understanding
More informationReadyKart Mobile Processing Station Instructions for Use
GE Healthcare Instructions 28-9606-47 AB ReadyKart Mobile Processing Station Instructions for Use Contents ReadyToProcess 1 Introduction... 1 2 General Description... 2 3 Description of Components... 4
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationHand-Held Lubrication PowerLuber Grease Guns
PowerLuber Grease Guns Professional Two-Speed 14.4-Volt Cordless Grease Gun Lincoln s new, heavy-duty 14.4-Volt PowerLuber gives you the power to lubricate just about anything, anytime, anywhere. Two-speed
More informationHC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
More informationTL-12 Passenger Car Alignment System
Operation and Service Manual Laser Guided Wheel Alignment System TL-12 Passenger Car Alignment System 8231 Blaine Road Blaine, WA 98230 360-371-0552 360-371-0553 fax 800-496-3777 toll free www.tru-line.net
More informationLift- and transport truck HTW 50/100 Standard model
Lift- and transport truck HTW 50/100 Standard model The lift- and transport truck has a rugged, torsion-resistant frame structure, steel powder-coated (grey RAL 7035) with smoothly running, integrated
More informationCushion Tyre Forklift Range 1.5 to 7.0 ton
1.5 to 7.0 ton Availability and specifications are determined regionally and are subject to change without notice. Please consult your authorised Toyota distributor for details. - Dentsu Brussels - 1/720/010/10077
More informationMounts & Stands HOME OFFICE COMMERCIAL
Vol. 3 Mounts & Stands HOME OFFICE COMMERCIAL Universal Touch Screen/LCD/LED Monitors Tabletop Stand - Universal Television/ Touch Screen Stand with Steady Base - Full-Motion LCD/LED Monitor Desk Stand
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationCPL SYSTEMS / GROENEVELD AUTOMATIC GREASING SYSTEM COMPLETE SYSTEM CHECK PNEUMATIC PUMP
CPL SYSTEMS / GROENEVELD AUTOMATIC GREASING SYSTEM COMPLETE SYSTEM CHECK PNEUMATIC PUMP Feb 5, 2003 1 CPL SYSTEMS / GROENEVELD AUTOMATIC GREASING COMPLETE SYSTEM CHECK - PNEUMATIC PUMP THE SYSTEM DOES
More informationUNITOR VACUUM cleaners
UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.
More informationRoanoke Pinball Museum Key Concepts
Roanoke Pinball Museum Key Concepts What are Pinball Machines Made of? SOL 3.3 Many different materials are used to make a pinball machine: 1. Steel: The pinball is made of steel, so it has a lot of mass.
More informationRecommended Forklift Free System Features for Proper Safety and Ergonomic Operation
When re-designing material handling flow to address restricted use of forklifts (Forklift Free), equipment ergonomics and safety play a key role. Following is a list of equipment and corresponding features
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More information46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
More informationA Short Course on Wheel Alignment
A Short Course on Wheel Alignment In its most basic form, a wheel alignment consists of adjusting the angles of the wheels so that they are perpendicular to the ground and parallel to each other. The purpose
More informationLX Series. 1.5 3.6 Tonne - Compact Cushion Models 1.6 2.5 Tonne - Compact Pneumatic Models
LX Series 1.5 3.6 Tonne - Compact Cushion Models 1.6 2.5 Tonne - Compact Pneumatic Models The Compact LX series is a reflection of Nissan's continuing commitment to designing and delivering products of
More informationMaster Catalogue I August 2011
Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems 58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile
More information