MONITOR SECTION INDEX

Transcription

1 MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior E6 SharpShooter Four Tiller Bar E7 SharpShooter Four Dual Handwheel E8 Alpha-SHW Single HandWheel Monitor E9 Spectrum Mini- Monitor E10 Spectrum High Flow Model 4 Oscillating Monitor / Tiller Bar Control...E11 Spectrum Medium Flow Model 4 Oscillating Monitor...E12 Spectrum Marine Grade Model 4 Oscillating Monitor...E13 Spectrum Low Flow Model 4 Oscillating Monitor...E14 Durham Oscillating Monitor Conversion Kit...E15 Spectrum Direct-Mounted Electric Actuated Monitor...E16-E17 Spectrum Electro/Hydraulic Actuated Monitors...E18-E19 Monitor & Friction Head Loss Chart... E20 Hydrant Monitor Stand... E21 PRODUCTS E1

2 Monitors Daspit Tool Features: Patented Daspit Tool tank frame clamp with 5 vertical waterway Daspit Tool Specialty Flange Monitor Adapter Daspit Tool Rotator Elbow with Storz inlet and 4.5 (F) NH swivel adapter Component Weights: Daspit Tool Tank Clamp = 89 lbs Accessory Component Weights: 90 Aluminum Rotator Elbow (F) NH Swivel x 5 Storz = 22 lbs 30 Aluminum Rotator Elbow (F) NH Swivel Elbow x 5 Storz = 9 lbs 4 Aluminum Tiller Bar Monitor w/ 4.5 (F) NH Swivel inlet = 43 lbs 4 Aluminum Dual Hand Wheel Monitor (F) NH Swivel inlet = 50 lbs Ranger 1.5 Nozzle = 22 lbs Applications: Sunken roof Rim Seal fire Vapor Suppression/Mitigation Options: 3 Aluminum Waterway Monitor w/tiller Bar Control 250-1,000 gpm Automatic Nozzle 4 Aluminum Waterway Monitor w/dual Hand Wheel Control 500-2,000 gpm Automatic Nozzle Rim Mounted Model Truck Mounted Model Throw-Down Model Tank Mount Standard Unit For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS E2

3 Monitors Daspit Tool - Truck Mount For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS E3

4 Monitors Daspit Tool - Throw Down Model Component Weights: Daspit Tool Throw Down Mount = 113 lbs 8 Stabilizing stakes = 64 lbs For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS E4

5 Monitors Alpha MA-HV4 Monitor Rugged lightweight aluminum construction 4 ID full flow monitor with Quick Acting Tiller-Bar control for vertical and horizontal movement. Red powder coat anodized aluminum. The single 4 full-flow waterway with internal turning vanes is designed to provide maximum efficiency. The Easy-Lock brake system insures that the nozzle position stays put with the simple twist of an ergonomically designed locking bar. Monitor features a 3.50 (M) NH outlet and a # ASA flat-faced flange inlet. Horizontal articulation is 360 and vertical travel is 75 up and -25 down. PRODUCTS E5

6 Monitors Alpha-E Tiller Bar Monitor - 3 Rugged, corrosion resistant brass construction; unique configuration flows up to 1250 gpm; compact - just 16 high; 3 NPT female, 3 or 4 150# ANSI flange; vertical movement 90 degrees above horizontal to 45 degrees below; full, continuous 360 degree rotation; rugged, stainless steel lock hardware; brass balls in all swivel joints; grease fittings for easy lubricaion; durable acrylic urethane finish Alpha-E Tiller Bar Monitor Waterway Inlet Discharge Material Vertical Travel Horizontal Rotation Flanged 2.5 NH(M) Cast Brass 90º 360º PRODUCTS E6

7 Monitors SharpShooter Four Tiller Bar -4 Superior grade 4 I.D. waterway monitor with tiller bar control for vertical and horizontal movement. Designed for use in corrosive atmospheres that require the dependability and durability of an all brass monitor. Single waterway with turning vanes providing excellent projection for water or foam streams. Flows up to 1,500 gpm. Tiller bar control with brake band swivels, adjusts, then locks at the vertical and horizontal position. Vertical setting is from minus (-) 10º to plus (+)70º. Full 360 degree horizontal travel. Painted red polyurethane finish. 3.5 NH (M) discharge threads. Base # ASA flange. Sharpshooter Four Waterway Inlet Discharge Material Vertical Travel Horizontal Rotation 4 4 Flange 3.5 NH(M) Cast Brass 80º 360º PRODUCTS E7

8 Monitors SharpShooter Four Dual Handwheel -4 Superior grade 4 I.D. waterway monitor with dual handwheel/worm gear operation for vertical and horizontal movement. The ultimate monitor for portable applications or for fixed installations where precise and positive control are needed. Designed for use in corrosive atmospheres that require the dependability and durability of an all brass monitor. Single waterway with turning vanes providing excellent projection for water or foam streams. Flows up to 1,500 gpm. Vertical handwheel adjusts trajectory from minus (-) 10º to plus (+)90º. Horizontal handwheel allows for full 360º rotation. Painted red polyurethane. 3.5 NH (M) discharge threads. Base # ASA flange. Sharpshooter Four Waterway Inlet Discharge Material 4 4 Flange 3.5 NH(M) Flange Vertical Travel Horizontal Rotation Cast Brass 100º 360º PRODUCTS E8

9 Monitors Alpha-SHW Single HandWheel Monitor - 3 Rugged, cast brass construction Full 3.0 unobstructed waterway FLows up to 1250 GPM Handwheel driven worm gear fully enclosed and protected from the elements Stainless steel worm Vertical travel from 70 above to 70 below horizontal Gear holds vertical position wherever it is stopped Four ball races with bronze balls and grease zerks for easy lubrication Full 360 rotation with positive twist lock 2.5 male outlet FM Approved See chart for base options Finish red urethene enamel. Model Waterway Inlet Discharge Material Vertical Travel Horizontal Rotation Alpha-SHW 3 3 or 4 Flange 2.5 NH(M) Cast Brass 90º 360º PRODUCTS E9

10 Monitors Spectrum Mini- Monitor -2 Designed for use in corrosive atmospheres that require the dependability of an all brass monitor. Suitable for most industrial environments. Flows up to psi. Full 2 I.D. waterway, efficiently designed to minimize pressure drop. 2 NPT female inlet base, 1.5 NH male discharge tip. Tiller bar control handle with rubber grip. Vertical (110º) and horizontal (360º) adjustments with positive quarter-turn locking handles. Natural brass finish. Model Waterway Inlet Discharge Material Vertical Travel Horizontal Rotation Mini Monitor 2 2 NPT (F) 1.5 NH(M) Cast Brass 110º 360º PRODUCTS E10

11 Oscillating Monitors Spectrum High Flow Model 4 Oscillating Monitor Tiller Bar Control For flows between gpm. Spectrum High Flow Model 4 waterpowered oscillating monitor is constructed of predominantly corrosion-resistant materials. Cast brass monitor body with stainless steel trim. 4 I.D. waterway with turning vanes. Controls provided for adjusting vertical trajectory as well as horizontal position. Reciprocating motion is generated by a two-way high performance hydraulic actuator. Oscillation is accomplished through the (Nozzle shown for reference only) use of plated sprockets and a heavy duty drive chain. Standard arc of oscillation is from 0-90 and speed of oscillation is from 0-40 per second. Vertical trajectory is from minus (-)10 to plus (+)70. Standard inlet flange # ASA RF Flange. Monitor is to be used with either a non airaspirating or air-aspirating nozzle. Standard 3.5 NH (M) discharge. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF. Model 100 PSI Inlet Discharge Water I.D. High Flow Model 4 Tiller Bar Control Between gpm 4 150# ASA RF flange 3.5 NH (M) 4 PRODUCTS E11

12 Oscillating Monitors Spectrum Medium Flow Model 4 Oscillating Monitor For flows between gpm. Spectrum Medium Flow Model 4 low profile water-powered oscillating monitor features a super-compact design, as well as predominantly corrosion resistant materials of construction. Reciprocating motion is generated by a two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 10º below to 70º above horizontal. Single brass 3 I.D. waterway with turning vanes provided with positive horizontal and vertical locks. Standard inlet flange # ASA RF Flange. Monitor can be used with either a non air-aspirating or air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF. (Nozzle shown for reference only) Model 100 PSI Inlet Discharge Water I.D. Medium Flow Model 4 Between gpm 4 150# ASA RF flange 2.5 NH (M) 3 PRODUCTS E12

13 Oscillating Monitors Spectrum Marine Grade Model 4 Oscillating Monitor For flows between gpm. Spectrum Marine Grade Model 4 low profile water-powered oscillating monitor features a super-compact design, as well as construction of totally corrosion resistant materials to include inlet flange, enclosure and drive mechanism, sprocket and chain all manufactured in 316 Stainless Steel. Reciprocating motion is generated by a two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 10º below to 70º above horizontal. Single brass 3 I.D. waterway with turning vanes provided with positive horizontal and vertical locks. Standard inlet flange # ASA RF Flange. Monitor can be used with either a non air-aspirating or air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF. Model 100 PSI Inlet Discharge Water I.D. Marine Grade Model 4 Between gpm 4 150# ASA RF flange 2.5 NH (M) 3 * Minimum operating pressure = 50 psi PRODUCTS E13

14 Oscillating Monitors Spectrum Low Flow Model 4 Oscillating Monitor For flows between gpm. Spectrum Low Flow Model 4 low profile waterpowered oscillating monitor features a super-compact design, as well as corrosion resistant materials of construction. Reciprocating motion is generated by a two-way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 30º below to 80º above horizontal. Single brass 2 I.D. waterway. Provided with positive horizontal and vertical locks. Standard inlet flange #. Monitor can be used with either a non air-aspirating or air-aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF. (Nozzle shown for reference only) Model 100 PSI Inlet Discharge Water I.D. Low Flow Model 4 Between gpm 4 150# ASA RF flange 1.5 NH(M) 2 * Minimum operating pressure = 50 psi PRODUCTS E14

15 Oscillating Monitors Durham Oscillating Monitor Conversion Kit The Durham Conversion Kit transforms an existing manual station monitor into an oscillator. Designed for use with most 2.5 or 3 I.D. single waterway monitors, flowing up to 750 gpm. Upgrading foam or water monitor coverage in any area is now as easy as unbolting the existing monitor and inserting the conversion kit between the flanges. Oscillating mechanism is identical to the one used on the Spectrum Model 4 Oscillating Monitor and is Factory Mutual Approved - File No. J.I.1R6A3.AF. Standard inlet and discharge flange is -4 ASA RF Flange 150#. Optional inlet and discharge flanges available upon request. Model 100 PSI Inlet Discharge Water I.D. Durham Conversion Kit up to 750 gpm 4 150# ASA RF flange 4 150# ASA RF flange 2.5 or 3 * Minimum operating pressure = 50 psi PRODUCTS E15

16 Remote Control Monitors Spectrum Direct-Mounted Electric Actuated Monitor Flows water or foam from 500 to 6,000 gpm. The Spectrum Direct-Mounted Electric Actuated High Volume/Remote Control Monitor has a programmable oscillation capability, but may also be overridden with a matched Hydro-Foam nozzle operated remotely through the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through the use of handwheels. Foam concentrate can be proportioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate storage tank. All electric actuators are reversible, NEMA 7 explosion proof, refinery grade, F.M. Approved and C.S.A. certified. No external controls, starters, or starters in motor control center are needed. Only power and control conductors are required. Monitor can be programmed to return to home position (horizontal, vertical, nozzle to wide angle fog) after use, automatically, whether P.L.C. controlled or hard wired. Two direct mounted electric actuators with speed reducing gear drives installed on the motor enable remote control of horizontal position, as well as vertical trajectory. Field-adjustable limit switches on each actuator allow 340º horizontal rotation and from minus (-)70º to plus (+)70º vertical travel. Monitor traversing speed is a least 10º per second. A third direct-mounted electric actuator enables remote operation for the nozzle s discharge pattern, from wide fog to straight stream. Weather protective cowlings are provided over all gears and shafts. Monitor and controls are designed for minus (-)20º F operation. Maximum working pressure is 200 psi. Stainless Steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel swivels with stainless steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Standard motor voltage is 480/3/60. Standard Control voltages is 120 Vac. Other voltages are available when required. NOTES: Monitor Mounted Junction Box is NEMA 4X, pre-wired to monitor actuators, with all required electrical interface equipment 4 or 6 fabricated stainless steel waterways provide maximum flow efficiency, minimum friction loss, and provides the ultimate in product longevity. Normally supplied with custom control panel wireless options available Exceeds all known competitors specifications, options, and performance Suitable for Marine/Dock Protection, and any special hazards protection Engineered Tower/Waterway available, heights from 5 to 40 Matched water supply specialty deluge valve and strainer packages available Model Nominal flow range Inlet Pressure Drop 4 Waterway Monitor gpm gpm-9 psi 6 Waterway Monitor gpm gpm-7 psi 8 Waterway Monitor gpm gpm-10 psi PRODUCTS E16

17 Remote Control Monitors Spectrum Direct-Mounted Electric Actuated Monitor PRODUCTS E17

18 Remote Control Monitors Spectrum Electro/Hydraulic Actuated Monitors Flows water or foam from 500 to 3,000 gpm. The Spectrum Electro/Hydraulic High Volume/Remote Control Monitor is operated remotely through the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through the use of handwheels. Two hydraulic actuators installed on the monitor enable remote control of horizontal position, as well as vertical trajectory. Maximum travel is limited to 340 degrees horizontal travel and from minus (-)70 degree to plus (+)70 degree vertical travel. Monitor traversing speed is at least 8 degrees per second. A direct-mounted linear hydraulic actuator enables remote operation for the nozzle s discharge pattern, from wide fog to straight stream. Weather protective cowlings are provided over all gears and shafts. Equipped with a standard non air aspirating fog-to-straight stream nozzle. With a matched Hydro-Foam nozzle, foam concentrate can be proportioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate storage tank. Stainless steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel swivels with stainless steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Anodized aluminum fog/straight stream nozzle. Model Nominal flow 100 psi Inlet Pressure Drop 4 Waterway Monitor gpm gpm-9 psi 6 Waterway Monitor gpm gpm-7 psi PRODUCTS E18

19 Remote Control Monitors Spectrum Electro/Hydraulic Actuated Monitor PRODUCTS E19

20 Monitor and Friction Head Loss P 13 S 12 I 11 G Pressure Loss at Indicated Flow U.S. GPM Note: Pressure losses indicated are nominal and vary slightly with each monitor. PRODUCTS E20

21 Monitor Accessories Hydrant Monitor Stand For mounting monitor station (Hydro-Foam or water only) onto any fire hydrant. Standard configuration: water inlet is 2.5 NH(F) brass swivel; 3 waterway with 90 degree elbow; bolted vertical support stanchions; flanged discharge (specify either 3 or 4 150# ASA). Red polyurethane finish. Monitor Stand shown with Hydrant and Optional Monitor and Nozzle. Note: hydrant not included. PRODUCTS E21