1 INSTALLING AND USING A "MONOPRICE" USB TABLET INTO A "WINDOWS" COMPUTER HIGH-LEVEL EXECUTIVE SUMMARY "Monoprice" USB tablets are bundled with a CD containing hardware drivers and "Tablet Software". Here is our advice about installing and using this inexpensive USB tablet in a "Windows XP", Windows Vista", or "Windows 7" computer. WHY USE A "MONOPRICE" USB TABLET? For the rest of us (at approximately one-third the price of a comparably-sized Wacom "Intuos" tablet), Monoprice.com sells a line of inexpensive USB tablets that are described at A blow-by-blow comparison between "Monoprice" tablets and "Wacom Intuos" tablets can be found at
2 WHAT IS ON THE CD THAT ARRIVES WITH A "MONOPRICE" USB TABLET? The CD that is packaged with your "Monoprice" USB tablet contains: hardware drivers for the tablet and five(5) "Tablet Software" application programs: According on page 5 of "TabletSoftware_English.pdf" on the bundled CD that arrived with Bill Brownlee's "Monoprice" 12x9-in. tablet:
5 MONOPRICE'S "TABLET SOFTWARE" COMPATIBILITY CLAIMS According on page 5 of "TabletSoftware_English.pdf" on the bundled CD that arrived with Bill Brownlee's "Monoprice" 12x9-in. tablet:
6 RESULTS OF TESTING OF MONOPRICE'S "TABLET SOFTWARE" APPLICATIONS We tested the some of the Monoprice "Tablet Software" applications on "Wndows 7", "Windows Vista", and "Windows XP" computers: "Word Annotation Annotate for Word" only works for "Microsoft Word 2003". It does not work for "Microsoft Word 2007" and "Microsoft Word 2010". We did not test with "Microsoft Word 2000". (During the installation of "Tablet Software", "Word Annotation Annotate for Word" will not install unless it detects the presence of "Microsoft Word 2003" or "Microsoft Word 2000".) "Pen Commander" worked in "Windows XP". It did no install into "Windows Vista" and "Windows 7". "Pen Signer" works in "Microsoft Word 2002", "Microsoft Word 2007", and "Microsoft Word 2011". "Pen Signer" works in "Microsoft Excel 2003", "Microsoft Excel 2007", and "Microsoft Excel 2011". "Pen Signer" works in "PowerPoint 2003" and "PowerPoint 2011". "Pen Signer" did not work in "PowerPoint 2007". We did not test "Pen Mail" since we do not use a "standalone software program" (such as "Outlook", "Thunderbird", or "Eudora"). "Pen Notice" works well in "Windows XP" and "Windows 7". "Pen Notice" skipped when we used it to write onto the "Desktop" of a "Windows Vista" computer that had 4 Gigabytes of RAM. We did not test "Pen Notice" with "Windows 2000". "Pen Notice" does not work well on computers that have less that 3 Megabytes of RAM: it "skipped" as we were writing on RAM-challenged computers. Since "Pen Notice" draws on top of the entire Windows "Desktop", it works well with all "Windows" applications programs.
7 "MONOPRICE" INSTALLATION BASICS The installation process for installing a "Monoprice" tablet into a "Windows.." computer consists of four "big steps": Big Step 1: Remove hardware drivers and software applications for any other USB tablets that you have ever attached to the "Windows.." computer. Big Step 2: Install the AAA battery into the pen of the "Monoprice" tablet. Big Step 3: Install Monoprice's proprietary "hardware drivers". Big Step 4: Attach the USB cable of the "Monoprice" tablet to an available USB port and perform an initial test of the tablet. (Optional) Big Step 5: Install the "Tablet Software" programs that are on the CD that is "bundled" with the "Monoprice" tablet.
8 BIG STEP 1: REMOVE HARDWARE DRIVERS AND APPLICATIONS FOR ANY OTHER USB TABLETS THAT YOU HAVE EVER ATTACHED TO YOUR "WINDOWS.." COMPUTER Remove hardware drivers and software applications for any other USB tablets that you have ever attached to your "Windows.." computer. The various brands of USB tablets do not get along with each other so please make sure that you only have one brand of USB tablet attached to your "Windows.." computer at any single point in time. The hardware driver for the "Monoprice" tablet does not get along with the hardware drivers of the tablets of other brands of USB tablets. Use "Revo Unstaller Free", "PC Decrapifier", "Add or Remove Programs"("Windows XP"), or "Programs and Features"(Windows Vista" and "Windows 7") to remove driver and application software that is for another other brand of USB tablet, prior to installing the hardware driver for a "Monoprice" tablet.
9 BIG STEP 2: INSTALL THE AAA BATTERY INTO THE PEN OF THE "MONOPRICE" TABLET The documentation that is provided by "Monoprice" fails to explain the correct orientation for the AAA battery that goes into the pen. For instructions on installing this battery, please see
10 BIG STEP 3: INSTALL MONOPRICE'S PROPRIETARY "HARDWARE DRIVERS": When installing a "Monoprice" USB tablet into a "Windows.." computer, you have a choice between installing the "hardware driver" on the bundled CD or the more current hardware driver that is downloadable from the uc-logic.com Web site.
11 BIG STEP 3 (LESS DESIRABLE CD OPTION) WHEN INSTALLING HARDWARE DRIVERS FOR THE TABLET, USE THE DRIVERS THAT ARE ON THE BUNDLED CD ONLY IF YOU HAVE NO ACCESS TO THE INTERNET: If you have access to the Internet, skip this section and move to the next section where you will download more a current hardware driver from a Web site on the Internet. The "Monoprice" USB tablet arrives with a CD that contains all installation programs. You insert this CD into your computer and either the "Setup.exe" file on the CD automatically runs or you can double-click on it to start it up. Then, the following screen is displayed in your "Windows.." computer:
12 The top "Driver Setup" button has "Support Dual Screen" as a description. The bottom "Driver Setup" button has "Support XP 64Bit" as a description. If you click on the top "Driver Setup" button, you will install the drivers located at <Driver letter of the CD>:\Driver\ If you click on the bottom "Driver Setup" button, you will install the drivers located at <Driver letter of the CD>:\Driver1\ The PDF documentation file inside <Driver letter of the CD>:\Driver1\ makes no mention of dual monitor screens for any operating system so we surmise that you have to use the top "Driver Setup" button if you have multiple monitors in any version of "Windows.."
13 BIG STEP 3 (MORE DESIRABLE INTERNET DOWNLOAD OPTION) WHEN INSTALLING THE TABLET, USE THE MORE RECENT DRIVERS AT "uc-logic.com" (INSTEAD OF THE DRIVERS ON THE BUNDLED CD) (IF YOU HAVE ACCESS TO THE INTERNET) More up-to-date hardware drivers are available at the manufacturer's Web site at so you probably should use them instead, according to However, the CD also contains some amazing "Windows" software applications which are not available at the manufacturer's Web site: You can use the "Tablet Software" on the bundled CD to do freehand drawing onto documents, presentations, spreadsheets, graphics programs, and (tempoararily) onto the Windows "Desktop". You have to install hardware drivers for the Monoprice tablet BEFORE installing the "Tablet Software" applications on the bundled CD.
14 The Web page at looks like this:
15 For the various "Windows XP/Vista/7" computers that we tested the "Monoprice" tablet on, we had great success with the most recent driver that has a date of : Use the older driver only if you are running the extremely rare 64-bit version of "Windows XP".
16 BIG STEP 4: ATTACH THE USB CABLE OF THE "MONOPRICE" TABLET AND PERFORM AN INITIAL TEST OF THE TABLET: AFTER you complete "Step 3", attach the USB cable of the "Monoprice" tablet to any available USB 2 or USB 3 port. If you touch the tip of the pen to the drawing surface of the "Monoprice" tablet and make a drawing motion, the mouse cursor of your "Windows.." computer should move in a manner that corresponds to your drawing motions. If you attempt to draw on the tablet and nothing happens, you can follow the troubleshooting steps at Monoprice.pdf to resolve the problem
17 SOFTWARE PROGRAMS AND SUPPORT FOR THE "MONOPRICE" USB TABLET: The "Windows.." operating system treats the Monoprice "USB" tablet like two mice. For example, "Devices and Printers" in "Windows 7.." shows the "Monoprice" as two devices: a "HID-compliant mouse" and a "USB Input Device":
18 In order to get the tablet to act as an ink pen, a brush, a highlighter, paint bucket, or as an eraser, you have to either use the "Tablet Software" programs that are provided on the bundled "Monoprice" CD or use the "tablet support" that is available in many software programs. For example, in "Microsoft Office 2010" programs, you can use the "Ink Tools" tab to activate various drawing tools for your "Monoprice" tablet.
19 OPTIONAL BIG STEP 5: INSTALL "TABLET SOFTWARE" PROGRAMS USING THE INSTALLATION CD OF THE "MONOPRICE" TABLET
20 The "Monoprice" USB tablet arrives with a bundled CD: You insert this CD into your computer and either the "Setup.exe" file on the CD automatically runs or you can double-click on it to start it up. Then, the following screen is displayed in your "Windows.." computer:
21 The "Tablet Software Setup" button installs various tablet-based software application programs into a "Windows" computer.
22 If you click on the "Tablet Software Setup" button, you get a selection box as follows:
24 "PenMail.." provides you with a screen for writing a message. The you click on a button that opens your "standalone client software application program" (such as "Outlook", "Thunderbird", or "Eudora") and attaches your handwritten message to a new message. You then use your "standalone client software application program to send off your message. Unless you are absolutely sure that you want to use "PenMail", remove the checkmark from it:
25 Then click on the "OK" button. Click on the "OK" button.
27 USING THE PEN ON THE "MONOPRICE" TABLET The top button of the two buttons ("Button 2") on the side of the pen simulates a right-click of a mouse. Tap and hold also acts a right click in "Windows Vista" and "Windows 7". "Tap and hold" does not work in "Windows XP". Single click of the pen to select in all versions of "Windows". Double-click of the pen acts as a double-click of the mouse in all versions of "Windows". STORING THE PEN According on page 4 of "Quick Start Guide_English.pdf" on the bundled CD that arrived with Bill Brownlee's "Monoprice" 12x9-in. tablet:
28 USING "INK TOOLS" IN "MICROSOFT WORD 2010", "MICROSOFT EXCEL 2010", OR "MICROSOFT POWERPOINT 2010" "Microsoft Office 2010" has great "support" for USB tablets. If the "hardware driver" of your "Monoprice" tablet is installed and working correctly, the "Ribbon Bar" of "Microsoft Office 2010" programs will display an "Ink Tools" tab when the you touch the pen of the "Monoprice" tablet to the drawing surface of the tablet. See HA aspx for details on how to use "Ink Tools" in "Microsoft Word 2010", "Microsoft Excel 20" or "Microsoft PowerPoint 2010". From inside "Microsoft Word 2010", when you touch the pen of the "Monoprice" tablet to the drawing surface of the tablet. the "Ink Tools" tab looks like this:
29 If you then use your tablet pen or the mouse to click on "Pens" in the "Ink Tools" tab, it will then look like this: In addition to a "Pen", you also have a "Highlighter", an "Eraser", and a "Select Objects" tool.
30 If you use the pen to tap twice on the color selector, the color palette, it looks like this:
31 If you use the pen to tap twice on the line width selector, it looks like this:
32 USING THE "PENNOTICE" PROGRAM IN MONOPRICE'S "TABLET SOFTWARE" TO (TEMPORARILY) DRAW ANYWHERE ON THE COMPUTER MONITOR SCREEN You can use the "PenNotice" program that is part of Monoprice's "Tablet Software" suite of bundled applications programs to perform temporary freehand drawing anywhere on your computer monitor. This amazing program requires a computer with at least 3 Gigabytes of RAM. If you try using it on a computer with only 1 Gigabytes of RAM, the pen will "skip" with the drawing filling in 10 to 15 seconds after you draw it! Click on the Windows "Start" buttom:
33 The Windows "Start menu" will be displayed: Click on "All Programs".
34 Click on "Tablet Software":
35 Click on "PenNotice":
36 The "PenNotice" toolbar will be displayed: Click on the mouse icon.
37 Click on the "Annotate Mode" icon.
38 Use the pen of the tablet to draw anywhere you want on the monitor of the computer.
39 There are two ways for you to erase the drawing: Both ways are provided by the "Options" icon so click on it:
40 Method 1: You can click on the "Clear All" icon which looks like a waste basket. Method 2: You can click on the "Close" icon which will close the "PenNotice" software program and remove the "drawing".
41 USING THE "PENSIGNER" PROGRAM IN MONOPRICE'S "TABLET SOFTWARE" TO DRAW INTO DOCUMENT FILES Click on the Windows "Start" buttom:
42 The "Start menu will be displayed: Click on "All Programs".
43 Click on "Tablet Software":
44 Click on "PenSigner":
45 Click on "Yes":
46 The "PenSigner" toolbar will be displayed:
47 Open the document that you wish to draw into:
48 Use the pen of the tablet to tap on the Pencil button on the left or the Brush button on the right:
49 The "PenSigner" toolbar will expand downward: Use the pen of the tablet to tap on the desired color.
50 Use the pen of the tablet to adjust the "Line Width" slider.
51 Use the pen of the tablet to draw into the document:
52 Use the pen to tap on the "Undo" and "Clear" buttons, as required:
53 Use the pen to tap on "OK" button in order to lock in the drawing. Otherwise, the drawing will disappear when you attempt to save the document file with whatever software program it opened with.
54 Use the "Save" button of whatever software program you opened the document with to save the document:
User Manual Windows 7 / Vista / XP iotablet Driver I. General Information 2 1. Overview 2 2. Pen Tablet Function 2 3. System Requirements 2 4. Driver Installation 3 5. Hardware Installation 3 6. Verifying
BrightLink Interaction The BrightLink interactive pens turn any wall or table into an interactive area, either with or without a computer. With a computer, you can use Easy Interactive Tools (dual pens).
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
SMART Board User Guide for PC What is it? The SMART Board is an interactive whiteboard available in an increasing number of classrooms at the University of Tennessee. While your laptop image is projected
SMART Board 9 Software Tips and Tricks Tips for Writing and Adding Content Drawing (or erasing) fine lines For precise control of the digital ink, change the pen setting to use the thinnest line width.
The Floating Tools toolbar The features you use most are literally at your fingertips with the Floating Tools toolbar. If it is not already on your screen, you can launch the Floating Tools by selecting
SB101 SMART Board 101 Pieces and Parts SMART Board with cable connected to a laptop or desktop computer LCD projector with cable connected to the computer Computer SMART Board cable (use the appropriate
SMART Sympodium and Notebook Software 9.5 What is a SMART Sympodium? Equipped with the same software as SMART Board interactive whiteboards, SMART Sympodium interactive pen displays are perfect for presenting
SMART BOARD USER GUIDE FOR PC What is it? SMART Board is an interactive whiteboard available in an increasing number of classrooms at the University of Tennessee. While your laptop image is projected on
Smart Classrooms information & instructions Smart Classrooms are located in: Administration Building Arts & Science Building Academic & Technical Building Library STC AD003, AD209, AD208, AD202 & AD201,
PN-L702B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Version 2.1 Contents Setting up the PC...3 Installing the touch panel driver...3 Touch Panel Settings...4 How to configure settings...4 Calibration...5
USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from
Software User's Guide Brother QL-series The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice
Using An excerpt from Smart Technology's getting started manual explaining the basics of the SmartBoard and how to use it. Quick Reference Hardware Basics for Front Projection SMART Board Interactive Whiteboards
New Features in Microsoft Office 2007 TABLE OF CONTENTS The Microsoft Office Button... 2 The Quick Access Toolbar... 2 Adding buttons to the Quick Access Toolbar... 2 Removing buttons from the Quick Access
Anoto pendocuments User s Guide Copyright 1997 2009 Anoto AB. All rights reserved. Anoto, Magic Box and the Anoto logotype are trademarks owned by Anoto AB. All other trademarks are the property of their
Interactive Functions Manual Optical touch control projector packing list... i Accessories...ii Install in Windows OS... 1 Install in Mac OS... 20 Install in Linux OS... 28 Troubleshooting... 30 Optical
Sirona SIDEXIS Installation The installation and configuration of Sopro inter-oral cameras with SIDEXIS version 2.3 is a three step process. The first step is to install the USB 2.0 driver and test the
Computer Basics This class is designed to cover the following basics: computer hardware software computer s operating system different kinds of storage devices you can use to save files using a mouse what
SMART Podium for Instructors This tutorial shows how to get started using the SMART Podium in your classroom. We will discuss some of the basic functionality including: Using the pen as a mouse (click,
GOALS: The goal for this session is: Learn how to connect and use the SMART Board for effective instruction Ability to annotate and save work using Microsoft Office and SMART Notebook Software OBJECTIVES:
BrightLink Pro BrightLink Interaction Three interactive modes are available: Whiteboard mode Quick Reference This card will help you get started using your BrightLink Pro interactive projector. Use one
Florence School District #1 Module 2: SMART Board Basics and Beyond 1 SMART Board Software and Beyond In SMART Notebook software, you can create or open SMART Notebook software (.notebook) files. After
Interactive Functions Manual July, 2011 1 Contents How to use the pen... 3 Use with Windows... 4 Use with Mac OS... 15 Troubleshooting... 22 2 How to use the pen Before using the pen, install the batteries.
Contents Back >> Customizing Opening the Control Panel Control Panel Features Tabs Control Panel Lists Control Panel Buttons Customizing Your Tools Pen and Airbrush Tabs 2D Mouse and 4D Mouse Tabs Customizing
Using the Sympodium Interactive Monitor Newton Technology Guide Sympodium Interactive Monitor The Sympodium is an interactive monitor which allows you to write (using the pen attached) over anything you
Displaying Images on the SMART Sympodium Anything you can display on your computer monitor will be projected onto the SMART Sympodium when you are connected to the system. For example, you could display:
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
SMART Board Software for Macintosh Computers FAQ NOTE: The following FAQs relate to the latest SMART Board software release and apply only to Macintosh computers. The latest version of SMART Board software
Table of Contents LEGAL NOTICE... 3 1. INTRODUCTION... 4 1.1 About NovoScreenote Software... 4 1.2 System Requirements... 4 2. INSTALLING NOVOSCREENOTE... 5 2.1 Installing NovoScreenote on your PC (Windows)...
Jefferson Parish Library Computer Training Team Basic Computer Skills-With Office 2010 August 2011 1 Basic Computer Skills with Office 2010 Desktop with Icons Icons Task Bar Icons on the desktop represent
TAB420/424/460/461/464 GOTAB XERIOS 10 TABLET ANDROID 4.0 UPGRADE INSTRUCTIONS Page 1 of 9 BEFORE YOU START: BACKUP IMPORTANT DATA! Upgrading your Yarvik tablet to Android 4.0 will erase all user settings,
User s Guide Trademark Notice LinQ, SMART Board, Sympodium, Notebook, Bridgit, smarttech and the SMART logo are trademarks or registered trademarks of SMART Technologies Inc. in the U.S. and/or other countries.
SETTING UP YOUR REMOTE DESKTOP This section will assist you in setting you Remote Desktop Connection. This will allow you to create an icon for easy access to your virtual desktop. DISCLAIMER: All images
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please
Kennesaw State University Information Technology Services Technology Outreach Team SMART Board Notebook 10 User Manual Copyright 2010 Information Technology Services Kennesaw State University This document
1 User s manual Intuos Pro (PTH-451, PTH-651, PTH-851) Setting up Intuos Pro Using the Pen Tablet controls The Intuos pro multi-touch experience Customizing Intuos pro Application-specific settings Working
Magic Control Technology Corporation Android Mirror KM-C6105 Table of Contents Features... 3 Specifications... 3 Getting Started... 4 Windows 7 / XP - First Time Installation... 4 Windows 7 Start the Andriod
CorelDRAW X5 & CorelDRAW X6 CorelDRAW X5 & CorelDRAW X6 work best with Windows 7 but can be used with Windows Vista & Windows XP. Step One: Make sure that you have installed all Service Releases and software
CODESOFT Installation Scenarios NOTES: CODESOFT is a separate install from existing versions of CODESOFT. You will need to make note of your current settings (default directories, etc.) so you can duplicate
This Quick User Guide helps you get started with the IRIScan Book Executive 3 scanner. This scanner is supplied with the software applications Readiris Pro 14 (Windows and Mac ), IRIScan Direct and IRISCompressor
ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,
C R E A T E D 8 / 2 1 / 2 0 1 3 Recommended Settings for AVImark Introduction The following pages contain instructions for setting up AVImark. If you need assistance, please call our friendly technical
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
California State University, Fullerton Campus Information Technology Division Documentation and Training Services Handout Epson Brightlink Interactive Board and Pen Training Downloading Brightlink Drivers
Quick Start Using DASYLab with your Measurement Computing USB device Thank you for purchasing a USB data acquisition device from Measurement Computing Corporation (MCC). This Quick Start document contains
1 Intuos (CTL-480, CTH-460, CTH-480) Setting up Intuos Using your Intuos Using the Pen Using the ExpressKeys The Intuos multi-touch experience Customizing Intuos Going wireless with Intuos Troubleshooting
HOSTED DESKTOP MANUAL TABLE OF CONTENTS REMOTE DESKTOP MANUAL Last revision August 18, 2005 WHAT IS A REMOTE DESKTOP... 1 Security... 1 Terminals...2 SETTING UP YOUR REMOTE DESKTOP... 2 Installing Remote
TABLET & TOOLS CUSTOMIZING PEN CORDLESS MOUSE POP-UP MENU TROUBLESHOOTING User s Manual for Windows & Macintosh Wacom Graphire 3 User s Manual for Windows & Macintosh, March 07, 2003 English V1.0 for Windows
Creating Fill-able Forms using Acrobat 8.0: Part 1 The first step in creating a fill-able form in Adobe Acrobat is to generate the form with all its formatting in a program such as Microsoft Word. Then
Magaya Software Installation Guide MAGAYA SOFTWARE INSTALLATION GUIDE INTRODUCTION Introduction This installation guide explains the system requirements for installing any Magaya software, the steps to
1065 South Rogers Circle Boca Raton, FL 33487 Phone (561) 998-9600 Fax (561) 998-9609 Windows Driver Installation Guide Do not connect the printer to your computer s USB port until step #10 Please contact
SMART Boards What is a SMART Board? The SMART Board is an interactive whiteboard that converts a computer and date projector into a powerful tool for teaching and learning. With the computer image projected
Chapter 1 Software Installation and Creating a New Company OBJECTIVES 1. System Requirements. 2. Download QuickBooks 2014. 3. Install Software from CD. 4. Starting QuickBooks. 5. Creating a New Company.
USB to DVI-I Graphics Adapter CSV-2300D USER S MANUAL 1 of 40 Table of contents Safety instructions 3 Copyright 4 Trademarks 4 Introduction 4 Features 5 Application 5 Package contents 6 System requirement
PL-25A1 Hi-Speed USB Easy Transfer Cable User s Guide Manual (For Cable Manufacturer Reference Only Not for End-User Distribution) NOTE: Prolific only supplies the PL-25A1 controller chip, PCLinq3 drivers,
USB Cameras and Windows XP TroubleShooting Below is a short, step by step, way to get our cameras to work with Windows XP Home and Office editions. After connecting the camera to the computer as per the
MICROSOFT POWERPOINT 2010 Quick Reference Guide PowerPoint What is it? How is PowerPoint 2010 different from previous versions? PowerPoint is a computer program that allows you to create, edit and produce
Installing and Using the Epson Easy Interactive Tools with a BrightLink Projector These instructions are for both Mac & Windows clients Table of Contents Installing Epson Tools on a Mac Computer... 2 Install
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems
Smart Podium Basics Copyright 2012, Software Application Training, West Chester University. A member of the Pennsylvania State Systems of Higher Education. No portion of this document may be reproduced
OS X LION SET UP THE SYSTEM OS X Lion Set Up the System Last Edited: 2012-07-10 1 Personalize the Interface... 3 Organize the Desktop... 3 Configure Apple Trackpad... 4 Configure Apple Magic Mouse... 6
Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
Welcome! Welcome to the GMATPrep application. The GMATPrep test-preparation software was designed by the people who created the GMAT exam, to help you get ready to take the test. It includes practice questions
What's new in OneNote 2010 What's new in OneNote 2010 Universal access to all of your information With OneNote 2010, you have virtually uninterrupted access to your notes and information by providing the
User Manual for Mac & Windows Mac to Mac / Mac to Windows / Windows to Windows / Windows/Mac to ipad Windows/Mac to Android TABLE OF CONTENTS INTRODUCTION... 2 FEATUR ES... 2 SYSTEM REQUIREMENTS... 2 REGULATORY
SPLM DIGITAL SOUND PRESSURE LEVEL METER SoundLAB Software INSTALLATION & INSTRUCTION MANUAL Download Software from the Bogen website: www.bogen.com/software Specifications are subject to change without
User Manual Thermo Scientific Orion Orion Star Com Software Program 68X637901 Revision A April 2013 Contents Chapter 1... 4 Introduction... 4 Star Com Functions... 5 Chapter 2... 6 Software Installation
Kid-Tough Digital Studio Download PC software to import, organize, view and add special effects to your photos! Go to www.fi sher-price.com/kidtough and follow the on-screen instructions to download and
Microsoft Office 2010 Quick Guide Microsoft Office 2010 is now in use within Facilities and Services Division, though there may be some that are still to be updated. The first thing to notice about 2010
Newton Backup Utility User s Guide for the Windows Operating System K Apple Computer, Inc. 1995 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole
Overview Downloading Images and Movies from a Digital Camera to OLYMPUS Master 2 This article describes how to download image and movie files from an Olympus digital camera 1 to the OLYMPUS Master 2 application.
Microsoft Word 2010 Quick Reference Guide Union Institute & University Contents Using Word Help (F1)... 4 Window Contents:... 4 File tab... 4 Quick Access Toolbar... 5 Backstage View... 5 The Ribbon...
Federal Communications Commission (FCC) Radio Frequency Interference Statement User s Manual This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Your consent to our cookies if you continue to use this website.