Colorfly Tablet Upgrade Guide
|
|
- Lorraine Arnold
- 8 years ago
- Views:
Transcription
1 Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be upgraded. On the product page, click the 下 载 tab. 2. Click and download the firmware package (on the left of the area) and the upgrade tool package (on the right of the area). 3. Save the packages to a local disk on the PC. NOTE: The English website is being constructed. Therefore, currently, you can download the firmware and upgrade tool only on the Chinese website. 2. Installing the Upgrade Tool and Device Driver 2.1. Installing the Upgrade Tool Double-click to start the PhoenixSuit installation program. Follow the installation wizard to install the upgrade tool. NOTE: Driver installation may be required during the installation. If the following dialog box is displayed, click Next. Page 1 of 10
2 2.2. Installing the Device Driver NOTE: The driver is stored in the USBDriver folder that is generated after you decompress the upgrade tool package. During the driver installation, select the i386 folder if your PC runs on a 32-bit operation system; select the amd64 folder if your PC runs on a 64-bit operating system. In Windows 7 After you connect the tablet to a PC, the system automatically checks whether the corresponding device driver is installed. If yes, you do not need to install the device driver. If no, the system instructs you to install the device driver. Install the device driver as prompted. 在 Windows XP 中 : You need to install the device driver when you use the tablet for the first time. 1. Hold down the Power button of the tablet till the Power off option is displayed. Select Power off. 2. Hold down the Power button and connect the tablet to your PC. After the driver installation page is displayed, select Install from a list or specific location (Advanced) and click Next. 3. Click Browse to select the corresponding driver folder from the USBDriver folder and click Next to install the device driver. 4. After the installation is complete, click Finish. 3. Upgrading the Tablet 3.1. Preparations Back up data from the tablet to your PC (Connect the tablet to your PC and copy data to the PC). Ensure that the battery power is sufficient, to prevent upgrade failure due to power insufficiency. The power higher than 80% is recommended. Download the firmware and upgrade tool packages to the local PC and decompress the packages. Install the device driver. Ensure the device driver is successfully installed. NOTE: If you are not sure whether the driver is successfully installed, perform the following operations to update the driver: 1. Right-click My computer icon on the PC desktop and choose Properties. Page 2 of 10
3 2. Click Device Manager from the navigation area on the left. 3. In the displayed window, expand the Universal Serial Bus controllers node, right-click your device, and choose Update Driver Software. 4. In the displayed dialog box, choose Browse my computer for driver software. 5. Select the corresponding driver folder to complete the update Upgrade Process Upgrading the Tablet When It Is Turned Off NOTE: Currently for the upgrade tool, only the Chinese version is available. Perform the upgrade based on this upgrade guide. 1. Click to open the upgrade tool. The tool page is as follows. 2. Click (one-click upgrade) to enter the upgrade mode. Click (Browse) and select the firmware package. Page 3 of 10
4 3. After selecting the firmware package, insert included USB cable to your PC, and perform the following operation based on the actual situation: If the tablet has the Volume up physical button, hold down Volume up and insert the other end of the USB cable into the tablet USB port. If the tablet has the Home physical button but not the Volume up physical button, hold down the Home button and insert the other end of the USB cable into the tablet USB port. 4. After the following dialog box is displayed, select whether to format the storage device during the upgrade. (Yes): to upgrade the tablet in formatting mode. Data will be deleted. (No): to upgrade the tablet in common mode. User data will be reserved. It is recommended that you back up all required data and click (Yes), to Page 4 of 10
5 prevent program or data errors after the upgrade. 5. After the upgrade is complete, click 确 定 (OK). NOTE: Do not disconnect the tablet from your PC during the upgrade, to protect the tablet from damage Upgrading the Tablet When It Is Turned On 1. Click to open the upgrade tool. The tool page is as follows. 2. Connect the tablet to your PC. Enable USB debugging (Choose Settings > Developer options, and select USB debugging). NOTE: This upgrade tool can process only one intelligent device at a time. Do not connect multiple devices with the adb connection enabled to the PC at a time. After detecting the device, the tool page display a message indicating that the connection is successful, as shown in the following figure. Page 5 of 10
6 3. Click (one-click upgrade) to enter the upgrade mode. Click (Browse) and select the firmware package. 4. After selecting the firmware package, click (upgrade immediately), and click (yes) in the displayed dialog box. 5. After the following dialog box is displayed, select whether to format the storage device during the upgrade. Page 6 of 10
7 (Yes): to upgrade the tablet in formatting mode. Data will be deleted. (No): to upgrade the tablet in common mode. User data will be reserved. It is recommended that you back up all required data and click prevent program or data errors after the upgrade. 6. After the upgrade is complete, click 确 定 (OK). (Yes), to NOTE: Do not disconnect the tablet from your PC during the upgrade, to protect the tablet from damage. 4. Device Management Besides upgrade operations, the PhoenixSuit can be used for device management such as one-click backup for APK files on the device, one-click restoration based on backed up APK files, installation of APK files in batches, device restart, and switch to recovery mode. Click (device management) to enter the device management module. Page 7 of 10
8 One-click backup: Click (one-click backup). The program starts to back up the installed APK applications on the device. To stop the backup, click 取 消 (cancel), as shown in the following figure. After the backup is complete, the dialog box shown in the following is displayed. APK applications are backed up to the corresponding device module folder in PhoenixSuit\Backup\ in the My document folder. One-click restoration: Click (one-click restoration). You can restore the backed up APK applications to the tablet. To stop the restoration, click 取 消 (cancel), as shown in the following figure. After the restoration is complete, the dialog box shown in the following is displayed. Page 8 of 10
9 Batch installation: Click (batch installation). In the dialog box that appears, select one or more APK files to be installed, as shown in the following figure. To stop the installation, click 取 消 (cancel), as shown in the following figure. Page 9 of 10
10 Restart device: If the device does not respond, click (restart the device) to restart the device. Rstoration mode: Click (restoration mode) to switch the device to the recovery mode. If the device does not support the recovery mode, the device restarts and enters the Android mode, without posing any negative impact. Page 10 of 10
16.4.3 Lab: Data Backup and Recovery in Windows XP
16.4.3 Lab: Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment The
More information10.3.1.6 Lab - Data Backup and Recovery in Windows XP
5.0 10.3.1.6 Lab - Data Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment
More information5.6.3 Lab: Registry Backup and Recovery in Windows XP
5.6.3 Lab: Registry Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up a computer registry. You will also perform a recovery of a computer registry.
More informationPCLinq2 Hi-Speed USB Bridge-Network Cable. Quick Network Setup Guide
PCLinq2 Hi-Speed USB Bridge-Network Cable Congratulations! Quick Network Setup Guide For Windows 98/ME/2000/XP Congratulations for installing the PCLinq2 Hi-Speed USB Bridge-Network Cable. This Quick Network
More informationMidland BT Updater BTUpdater Program Program file (x86) ), Midland
Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed
More informationHow To Upgrade A Yarvik Gotab Tablet To Android 4.0 (For Android) 4.2.2 (For Ipad) 4Th Generation (For Microsoft) 4S) 4G (For Zemmer) 4
TAB420/424/460/461/464 GOTAB XERIOS 10 TABLET ANDROID 4.0 UPGRADE INSTRUCTIONS Page 1 of 9 BEFORE YOU START: BACKUP IMPORTANT DATA! Upgrading your Yarvik tablet to Android 4.0 will erase all user settings,
More informationUSB Driver Installation for Windows XP
USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from
More informationCANON FAX L360 SOFTWARE MANUAL
CANON FAX L360 SOFTWARE MANUAL Before You Begin the Installation: a Checklist 2 To ensure a smooth and successful installation, take some time before you begin to plan and prepare for the installation
More informationFirmware & Software update procedures Amicroe TouchTAB IV.
Firmware & Software update procedures Amicroe TouchTAB IV. Important note: The steps & procedures outlined below may be of assistance if you are experiencing difficulties with your Amicroe TouchTAB 9.7
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB drivers and Microsoft synchronization software for your Pathfinder 6057 printer. You need these utilities for your printer and computer
More informationSystem update procedure for Kurio 7 (For build number above 110)
System update procedure for Kurio 7 (For build number above 110) IMPORTANT NOTE: Before starting the procedure, please check your current Android build number, that can be found as follows: exit the Kurio
More informationThuraya XT-DUAL. Software Upgrade Manual
Thuraya XT-DUAL Software Upgrade Manual Version 1 / February 2012 1. INTRODUCTION... 3 2. SOFTWARE UPGRADE WITH WINDOWS 7... 4 2.1 Installation of the Upgrader Package... 4 2.2 Manual detection (optional
More informationInstallation Instructions for 9555 USB Driver
Prior to using the data modem features of your 9555 handset; you must first install the VCOMPORT 9555 USB Driver. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4,
More informationAIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
More informationQUANTIFY INSTALLATION GUIDE
QUANTIFY INSTALLATION GUIDE Thank you for putting your trust in Avontus! This guide reviews the process of installing Quantify software. For Quantify system requirement information, please refer to the
More informationANDROID RECOVERY STICK QUICK START GUIDE
Before you get started do the following: Open, and read through http://sticks.paraben.com/phone-recovery-faq.htmlhttp:// sticks.paraben.com/phone-recovery-faq.html this will help you with any questions
More informationUser Manual. Thermo Scientific Orion
User Manual Thermo Scientific Orion Orion Star Com Software Program 68X637901 Revision A April 2013 Contents Chapter 1... 4 Introduction... 4 Star Com Functions... 5 Chapter 2... 6 Software Installation
More informationChapter 1 Downloading Images to Your Computer (Windows)
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
More informationInstallation Instructions
Installation Instructions Windows USB driver for Installation If a Diagnostic Interface with USB is connected to a PC with a Windows operating system 98, ME, XP or Vista for the first time, it is necessary
More informationInstallation Manual LATC-W1
Installation Manual PRODUCT NAME Controller Setting Software MODEL / Series / Product Number LATC-W1 [Before using this product] Read the "End-User License Agreement" shown on the next page carefully and
More informationHow do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?
How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router
More informationInstalling the Gerber P2C Plotter USB Driver
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
More informationIntroduction About ZTE Terminal Software Online Upgrade (only for USA )
Introduction About ZTE Terminal Software Online Upgrade (only for USA ) Contents 1. What is terminal software online upgrade 2. The function of online upgrade 3. The promoted object and model 4. How to
More informationDriver Installation for Windows XP Home Edition and Windows XP Professional
Driver Installation for Windows XP Home Edition and Windows XP Professional Note: This guide is intended as an installation guide for all of Adaptec's USB 2.0 Drivers. The snapshots and text may refer
More informationMaintaining the Content Server
CHAPTER 7 This chapter includes the following Content Server maintenance procedures: Backing Up the Content Server, page 7-1 Restoring Files, page 7-3 Upgrading the Content Server, page 7-5 Shutting Down
More informationHow to install USB driver (MICRO/I)
How to install USB driver (MICRO/I) Install on Windows XP 1. Connect the USB port on HG3G series and the USB port on PC. 2. Windows displays Found new Hardware Wizard. Select No, not this time and press
More informationDirectOut Technologies
Installation Guide for USB Control This document is divided into three sections: Installation D.O.TEC USB Serial Driver Installation D.O.Update Firmware Update It refers to D.O.TEC products: D.O.TEC MADI.SRC
More informationHow to install USB driver (MICRO/I)
How to install USB driver (MICRO/I) HG2G-5S 1. The HG2G-5S USB driver installation wizard will start when Automation Organizer installation is complete. Click the Next button. 2. Read the license agreement
More informationMTA Course: 10753 Windows Operating System Fundamentals Topic: Understand backup and recovery methods File name: 10753_WindowsOS_SA_6.
STUDENT ACTIVITY 6.1: UNDERSTAND BACKUP AND RECOVERY METHODS MTA Course: 10753 Windows Operating System Fundamentals Topic: Understand backup and recovery methods File name: 10753_WindowsOS_SA_6.1 Lesson
More informationCenturion PLUS CPC4 Download Guide
Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility. 1010537 03 01 10 Section 50 1.0 Background: 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4 1) and Color
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB and Microsoft ActiveSync synchronization software for your Monarch Pathfinder Ultra Platinum 6039 printer and computer to communicate.
More informationhow to upgrade your IsatPhone
how to upgrade your IsatPhone The mobile satellite company installing the firmware upgrade tool From time to time, it may be necessary to upgrade your phone in order to improve its functionality and operation.
More informationInstructions for Uploading and Sending Transcripts to the CollegeforTN.org Transcript Exchange Chancery SMS IMPORTANT NOTES:
Instructions for Uploading and Sending Transcripts to the CollegeforTN.org Transcript Exchange Chancery SMS IMPORTANT NOTES: START WITH STEP 1 ONLY IF YOU HAVE DOWNLOADED AND INSTALLED THE CHANCERY SMS
More informationTAB08-201-3G XENTA 8c 8 3G TABLET FIRMWARE UPGRADE INSTRUCTIONS
TAB08-201-3G XENTA 8c 8 3G TABLET FIRMWARE UPGRADE INSTRUCTIONS Page 1 of 9 BEFORE YOU START: BACKUP IMPORTANT DATA! Upgrading your Yarvik tablet will erase all user settings, user installed applications
More informationTransferring Scans from your Dolphin into Destiny
Transferring Scans from your Dolphin into Destiny Summary: This article is intended to provide Destiny users with an overview of the following tasks 1. Downloading the Dolphin Transfer Utility to their
More information3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System. Version 4.2 Software Installation Guide (Upgrade) 1 P age
3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System Version 4.2 Software Installation Guide (Upgrade) 1 P age Contents Important Information Read First... 3 Software Download...
More information3. USB DRIVER. 3-1. Installation of USB driver. 3-1-1. Driver for Infinity SD Data Logger. INFINITY Series Acquisition Tools Manual
3. USB DRIVER 3-1. Installation of USB driver Before you launch this software, the driver should be once surely registered. Access between the instrument and a PC through the USB cable supplied by us as
More informationProcedure for updating Firmware of EZ4 W or ICC50 W
Procedure for updating Firmware of EZ4 W or ICC50 W 1. Download the Firmware file for your camera to your PC 2. Download the Leica Camera Configuration program to your PC 3. Install Leica Camera Configuration
More informationCongratulations on your purchase of a BPM Microsystems device programmer. Your new device programmer was designe d to provid e years of suppor t for
Congratulations on your purchase of a BPM Microsystems device programmer. Your new device programmer was designe d to provid e years of suppor t for thousand s of devices, with the use of optional socket
More informationSoftware Upgrade Assistant Manual for DuraXV
Software Upgrade Assistant Manual for DuraXV 2015 Kyocera Corporation. All rights reserved. KYOCERA is a registered trademark of Kyocera Corporation. All other trademarks are the property of their respective
More informationMoving Rockwell Software Activation Keys to the VersaView 200R Industrial Computer
Page 1 of 1 01/16/03 K. Smidler Moving Rockwell Software Activation Keys to the VersaView 200R Industrial Computer Rockwell Software programs often have runtime components that require activations to utilize
More informationGE Healthcare Life Sciences UNICORN 5.31. Administration and Technical Manual
GE Healthcare Life Sciences UNICORN 5.31 Administration and Technical Manual Table of Contents Table of Contents 1 Network setup... 1.1 Network terms and concepts... 1.2 Network environment... 1.3 UNICORN
More informationThe FlexiSchools Online Order Management System Installation Guide
The FlexiSchools Online Order Management System Installation Guide FlexiSchools May 2012 Page 1 of 18 Installation Pack Welcome to the FlexiSchools system. You will have received a disc containing: Sato
More informationWindows 7 Printer Driver Installation procedure
Windows 7 Printer Driver Installation procedure This is to explain how to install Windows Vista printer driver for Mitsubishi digital printer to Windows 7. * Although CP9550D/DW is shown through this document,
More informationShearwater Research Dive Computer Software Manual
Shearwater Research Dive Computer Software Manual Revision 1.3 Table of Contents 1. Basic overview of components 2. O/S IrDA driver installation 2.1 USB IrDA installation for Windows XP Home/Pro editions
More informationFirmware Update Instruction Manual
Firmware Update Instruction Manual This manual explains the procedures for downloading the CX2 firmware from the Ricoh website and updating the camera s firmware. Perform the following operations to update
More informationVirtualXP Users Guide
VirtualXP Users Guide Contents Chapter 1: Introduction... 2 Chapter 2: Install and Uninstall VirtualXP... 3 2.1 System Requirement... 3 2.2 Installing VirtualXP... 3 2.3 Uninstalling VirtualXP... 3 Chapter
More informationPrint Server Application Guide. This guide applies to the following models.
Print Server Application Guide This guide applies to the following models. TL-WR842ND TL-WR1042ND TL-WR1043ND TL-WR2543ND TL-WDR4300 CONTENTS Chapter 1. Overview... 1 Chapter 2. Before Installation...
More informationUpgrading Your PhoneTree Software
Upgrading Your PhoneTree Software For PhoneTree 2100/2500/3500, VoiceWave Series, Patient/Dental/Veterinary Messaging, and HealthWave models upgrading from 6.12.80 or older to 6.13 or newer Question: How
More informationU90Ladder / VisiLogic /UniLogic and software utilities system requirements. Contents
U90Ladder / VisiLogic /UniLogic and software utilities system requirements Contents Minimum System Requirements... Error! Bookmark not defined. UniLogic Installation... 3 Firmware Update and Management...
More informationInstalling S500 Power Monitor Software and LabVIEW Run-time Engine
EigenLight S500 Power Monitor Software Manual Software Installation... 1 Installing S500 Power Monitor Software and LabVIEW Run-time Engine... 1 Install Drivers for Windows XP... 4 Install VISA run-time...
More informationXConsole GUI setup communication manual September 2010.
XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT
More informationHow to Download Images Using Olympus Auto-Connect USB Cameras and Olympus Master
How to Download Images Using Olympus Auto-Connect USB Cameras and Olympus Master Introduction Auto-Connect USB is a feature that allows Olympus digital cameras to emulate a Hard disk drive when connected
More informationOctober 2011 3726 07897 601 Rev. B Page 1
Upgrading Polycom SoundStation2W software to Version 1.607 and CVM to Version 1.85 Installer for Microsoft Windows Vista and Windows 7 (32 and 64 bit) Operating Systems NOTE: Two versions of upgrader are
More informationInstall Device Drivers and Toolkit for Windows 7
Install Device Drivers and Toolkit for Windows 7 The USB driver is required for all installations to assure that the computer communicates with the digitizer. Note: Installation instructions for Windows
More informationUpgrade Guide. Step 1: Backing up your personal data on your HTC Touch
Upgrade Guide Step 1: Backing up your personal data on your HTC Touch If there is information on your device that you would like to retain, you will need to create a backup copy on your desktop PC prior
More informationDriver Installation for Windows 98 SE
Driver Installation for Windows 98 SE Note: This guide is intended as an installation guide for all of Adaptec's USB 2.0 Drivers. The snapshots and text may refer to the Adaptec AUA-3121 PCI to USB Enhanced
More informationWindows XP Manual Installation
Windows XP Manual Installation Installation of the drivers for your video card can be fairly easy if the following steps are followed carefully. There are a few things to keep in mind before proceeding
More informationInstalling Global Logger USB Drivers
Installing Global Logger USB Drivers For 32-bit Windows 8, skip to the section labeled, Continue with Driver Installation. For 64-bit Windows 8, start the process here. At the time of this writing, the
More informationPrinter Driver Installation Manual
Printer Driver Installation Manual Copyrights Any unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited. Limitation of Liability SATO Corporation and its
More informationTable of Contents. 1. Overview... 3. 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3. 2. Installation Instructions..
Table of Contents 1. Overview..... 3 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3 2. Installation Instructions.. 4 2.1 Installing the On Call Diabetes Management Software. 4 2.2
More informationThe following pages will help you to solve issues linked to the installation and first use of the Wintech Manager software and Wintech USB computer.
WINTECH MANAGER FAQ The purpose of this document is not to replace the complete user guide delivered on the Wintech Manager s CD. Most of the common question you may have about the use of the Wintech Manager
More informationBSDI Advanced Fitness & Wellness Software
BSDI Advanced Fitness & Wellness Software 6 Kellie Ct. Califon, NJ 07830 http://www.bsdi.cc SOFTWARE BACKUP/RESTORE INSTRUCTION SHEET This document will outline the steps necessary to take configure the
More informationSOS SO S O n O lin n e lin e Bac Ba kup cku ck p u USER MANUAL
SOS Online Backup USER MANUAL HOW TO INSTALL THE SOFTWARE 1. Download the software from the website: http://www.sosonlinebackup.com/download_the_software.htm 2. Click Run to install when promoted, or alternatively,
More informationStandard Operating Procedure for Upgrading the Firmware to Android Kit Kat
PadFone 2 E9525 Standard Operating Procedure for Upgrading the Firmware to Android Kit Kat Download the latest firmware from the ASUS Support site and follow the instructions described in this guide to
More informationTM Online Storage: StorageSync
TM Online Storage: StorageSync 1 Part A: Backup Your Profile 1: How to download and install StorageSync? Where to download StorageSync? You may download StorageSync from your e-storage account. Please
More informationsupport HP MFP Scan Setup Wizard 1.1
support HP MFP Scan Setup Wizard 1.1 Security Level: Customer Verbal Use Date Written/Updated: October 11, 2007 Document Summary a The Scan Setup Wizard is a Windows utility that end users can download
More informationSTATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER
Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable
More informationInstalling a printer in Windows 95.
Installing a printer in Windows 95. Click on Start - Settings - Printers In the Printers Folder double click on the Add Printer Icon Click on the Next Button to start the installation process of your printer
More informationJTAGjet. series SIGNUM SYSTEMS CORPORATION. USB 2.0 Driver for JTAGjet and ADM51. Installation Instructions
JTAGjet series SIGNUM SYSTEMS CORPORATION USB 2.0 Driver for JTAGjet and ADM51 Installation Instructions COPYRIGHT NOTICE Copyright (c) 2011 by Signum Systems Corporation. All rights are reserved worldwide.
More informationDeviceNet Communication Card
Release Notes DeviceNet Communication Card Catalog Number 1784-PCD Use These Release Notes These release notes contain information about the 1784-PCD card (Series A, B, and C) and version 4.03 of the driver.
More information64-Bit Compatibility with Micromeritics Applications
Tech Tip 7 64-Bit Compatibility with Micromeritics Applications Micromeritics products are designed to operate in most Microsoft Windows environments. However, more current versions of Microsoft Windows,
More informationActon Research Technical Support SpectraPro Diagnostic Procedure
Acton Research Technical Support SpectraPro Diagnostic Procedure Table of Contents Introduction to the Acton Research Technical Support SpectraPro Diagnostic Procedure...1 Checking the USB Drivers...2
More informationFile Management Utility. T u t o r i a l
File Management Utility T u t o r i a l Contents System Requirements... 2 Preparing Files for Transfer to GlobalMark... 2 Application Launch... 2 Printer Setup... 2 Communication Status... 4 Communication
More informationAllworx OfficeSafe Operations Guide Release 6.0
Allworx OfficeSafe Operations Guide Release 6.0 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy,
More informationMagaya Software Installation Guide
Magaya Software Installation Guide MAGAYA SOFTWARE INSTALLATION GUIDE INTRODUCTION Introduction This installation guide explains the system requirements for installing any Magaya software, the steps to
More informationChanging Your Cameleon Server IP
1.1 Overview Technical Note Cameleon requires that you have a static IP address defined for the server PC the Cameleon server application runs on. Even if the server PC has a static IP address, you may
More informationInstallation Instruction STATISTICA Enterprise Small Business
Installation Instruction STATISTICA Enterprise Small Business Notes: ❶ The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations
More informationSelect Correct USB Driver
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
More informationImage Backup and Recovery Procedures
Image Backup and Recovery Procedures Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important that you
More informationPrinter Support Guide. FedEx Ship Manager Software
Printer Support Guide FedEx Ship Manager Software Printer FAQs Installing Printer Drivers How do I download and install the Zebra printer drivers? To download and install the current Zebra printer drivers
More informationSuperGIS Software Installation Guide
SuperGIS Software Installation Guide System Requirements To install SuperGIS software, your computer should be equipped with.net Framework 2.0 Your mobile device (Windows Mobile) should be equipped with.net
More information1 Installation. Note: In Windows operating systems, you must be logged in with administrator rights to install the printer driver.
Installation A printer driver is an application that manages communication between a printer and your computer. Once installed, the printer driver settings must be configured in the printer Properties
More informationSoftware Manual LSeries Manager V1.2 Software Manual June 18, 2013. LSeries Manager 1.2. Software Manual
LSeries Manager 1.2 Software Manual Website: www.arri.com/service-lighting Page 1 of 14 Table of Contents 1 Download and Installation... 3 2 Start the LSeries Manager... 4 3 Lamphead Overview... 5 4 DMX
More informationInstalling PowerLink on Windows 7 64-bit
Instruction Manual Version 1.0, Code No. 20 751 806 1 Introduction... 3 2 Installing Virtual PC... 3 3 Configuring Windows XP Mode... 5 4 Installing Powerlink to Virtual XP... 8 5 Run PowerLink software
More informationSTATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS
STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS Notes 1. The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b)
More informationFACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000
FACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000 With regard to the supply of products, the current issue of the following document is applicable: The General
More informationFileMover 1.2. Copyright Notice. Trademarks. Patents
FileMover 1.2 Copyright Notice No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by
More information16.4.3 Optional Lab: Data Backup and Recovery in Windows 7
16.4.3 Optional Lab: Data Backup and Recovery in Windows 7 Introduction Print and complete this lab. In this lab, you will back up data. You will also perform a recovery of the data. Recommended Equipment
More informationEASE Scan Tool Customers. SECTION I - Installation
Please Install Your EASE Scan Tool DVD Before Installing Any Other Software That Came With Your Package. SECTION I - Installation ATTENTION: Do NOT connect an EASE Vehicle Interface Device to your Computer
More informationCOPYRIGHT TOP NOTCH TABLETS LLC. 2012. HOW TO: Install the Drivers to your PC so you can Flash Firmware to your RK3066 Powered Tablet.
HOW TO: Install the Drivers to your PC so you can Flash Firmware to your RK3066 Powered Tablet. 1. Inside the RKBatchTool1.5en folder you will see a sub folder called Driver 2. Inside of that folder are
More informationMotorola Phone Tools. Quick Start
Motorola Phone Tools Quick Start Contents Minimum Requirements...2 Before Installing Motorola Phone Tools...3 Installing Motorola Phone Tools...4 Mobile Device Installation and Configuration...5 Online
More informationA. I do not have my own personal certificate I am a new client or want to download a new certificate
This user guide will help you to create your personal certificate in file/browser or smart card certificate. If you already own a personal certificate in file that you have saved on your computer, you
More informationIntroduction to BlueSoleil cphone Functions and Operations
Introduction to BlueSoleil cphone Functions and Operations Contents Introduction to BlueSoleil cphone... 1 Functions and Operations... 1 1 Overview... 3 2 Operating Platforms... 3 3 Functions... 3 4 Function
More informationSoftware Repair Assistant Manual for DuraXV
Software Repair Assistant Manual for DuraXV 2015 Kyocera Corporation. All rights reserved. KYOCERA is a registered trademark of Kyocera Corporation. All other trademarks are the property of their respective
More information1 Minimum system requirements
Metrohm AG CH-9101 Herisau Switzerland Phone +41 71 353 85 85 Fax +41 71 353 89 01 info@metrohm.com www.metrohm.com Installation MagIC Net 2.x 1 Minimum system requirements Operating system RAM Memory
More informationRKM MK902II User Manual. Shenzhen Rikomagic Tech Corp.,Ltd. Page0
Shenzhen Rikomagic Tech Corp.,Ltd Page0 Table of Contents Declaration... 2 1. MK902 hardware introduce...3 1.1 Connector MK902II... 3 1.2 Device connection Instruction... 4 2. Remote control definition...5
More informationPP8X Printer Driver Installation Instruction
PP8X Printer Driver Installation Instruction Pinnacle Technology Corp. CONTENTS 1 BT Device Installation... 1 2 Printer Driver Installation... 6 3 How to Know the Connecting Port... 10 4 How to Configure
More informationWhatsUp Gold v16.3 Installation and Configuration Guide
WhatsUp Gold v16.3 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup Installation Overview... 1 Overview... 1 Security considerations... 2 Standard
More information