CONTENTS. Product overview 05. Application images 07. Detailed product performance 09. Product drawings and images 10. Specification codes 11

Transcription

1 acdc1120 A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67 1 E SPG207 Jun

2 CONTENTS Product overview 05 Application images 07 Detailed product performance 09 Product drawings and images 10 Specification codes 11 Installation instructions 13 Specification sheet 17 Contact details

3 OVERVIEW A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67 Provides an even, continuous and powerful light output with excellent colour rendering Available in 3 lengths, 400mm, 800mm,1200mm. Choice of three tilt options 0, 5 and 10 Fittings can be installed end to end for a continuous wallwash effect A micro louvre minimises glare and shields LEDs from view Architectural grade aluminium extrusion High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency A range of optics is available to suit every application: 18, 24, 30, 50 x 20 Choice of finishes: Extremely durable anodised aluminium black, anodised aluminium titanium. For especially demanding environments use hard anodised black, hard anodised titanium, chlorine anodised black, chlorine anodised titanium. Suitable for use in ambient temperatures ranging from -20ºC to 50ºC Maximum static load of 1000kg Impact resistant to IK 07 IP67 5 6

4 APPLICATION IMAGES The Regent Bridge, Edinburgh, Scotland. Lighting Design: FOTO-MA. Distribution partner: Kelvin Lighting. Stuart Armitt. acdc LED product: (acdc1120) 7 8

5 PRODUCT PERFORMANCE LED Type Cree LED Quantity 12 Drive Current 350mA Power Consumption. Including 85% Efficient Driver 14.66W PFC Driver dependant (Typical 0.9) Colour Temp 2700ºK 3000ºK 4200ºK 6000ºK Initial Colour Accuracy 2 Step MacAdam Ellipse Colour Stability Over Life. Measured at 6000hrs 2 Step MacAdam Ellipse CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Lumen Output including Thermal & Optical Losses Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire Lumen Output Luminaire Lumens per Circuit Watt (lm/w) Lifetime L70. Based on TM-21 >50,000 hours Lumen Depreciation LIF Cat/Codes for % depreciation at hrs Cat1/Code9 *Based on 400mm 50x20R optics 0º tilt End Sleeve 65mm 52mm 91mm 91mm 59mm Iglu Lengths *Based on 400mm, 3000ºK, 50x20R optics, 0º tilt UX TSI All acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime with lumen maintenance at L70 to guarantee product performance. Flanged endcap 456mm, 856mm or 1256mm Output data figures stated are typical values. To download photometric files please visit Flush endcap 408mm, 808mm or 1208mm 9 10

6 SPECIFICATION CODES Order Code, anodised aluminium black, 4200ºK, 50º, dimmable, 1200, 10º, IP67 acdc1120 /AAB / 42/50R/DIM/1200/10ADJ/IP67 Finishes Aluminium Titanium Aluminium Black Hard Titanium* Hard Black* Chlorine Titanium* Chlorine Black* AAT AAB HAT HAB CAT CAB RED 2700 K 3000 K GREEN Hard Titanium Hard Black Aluminium Titanium Aluminium Black 4200 K Finishes Chlorine Titanium Chlorine Black LED colour 6000 K BLUE AMBER RGB Optics LED Colour 2700ºK ºK ºK ºK 60 Red R Green G Blue B Amber A RGB RGB Optics 18º 18R 24º 24R 30º 30R 50º x 20º 50x20R Dimming Dimmable Non-dimmable DIM NON-DIM Fitting Length 400mm** mm mm 1200 Angle of Adjustment None 0ADJ 5º 5ADJ 10º 10ADJ 18º 24º 30º 50º x 20º Length 400mm 800mm 1200mm Angles of Adjustment IP Rating IP67 IP67 *Upon request. Miniumum order quantity applies **Not available with dimmable/rgb drivers on board (Remote only) Flange mounted end cap End Cap Option Flange Mounted End Cap with countersunk hole Flange Mounted End Cap with no holes CSK NH acdc1754 /CSK/ AAB Mounting sleeve kit Length 400mm Extrusion mm Extrusion mm Extrusion m Cut On Site 2500 acdc1753 /1200/ STE 0º 5º 10º IP rating IP67 Finished Aluminium Titanium Aluminium Black Hard Titanium Hard Black Chlorine Titanium Chlorine Black AAT AAB HAT HAB CAT CAB ILGu end cap used with Standard End Cap Flanged End Cap STE FME To order start leads, extension leads and interconnecting, please discuss your requirements with our sales team. Please refer to our white paper for usage in wet or submersed applications. This can be found by visiting

7 INSTALLATION INSTRUCTIONS B sleeveless 1 A C Sleeve Sleeveless 400mm 800mm 1200mm A B C Flanged End Cap 418mm 818mm 1218mm 62mm 91mm Standard 413mm 813mm 1213mm 62 mm 91mm Flanged End Cap 414mm 814mm 1214mm 48mm 88mm Standard 408mm 808mm 1208mm 48mm 88mm 2 Live Earth Neutral DMX + DMX- DMX Shield Switched Brown Green Blue DMX Brown Green Blue White Black Silver Non-Dim Max 10 x 1.2m 3 A x B x C Only to be installed by a qualified electrician Installation must be carried out in accordance with local regulations Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at the fitting Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance) acdc luminaires are designed for lighting applications and must not be used for any other purpose acdc1768 acdc1768/10m acdc1768/20m acdc1768/50m Wire Brown Blue Green/Yellow Connection + 240V - Earth Non - Dimmable DMX Max 10 x 1.2m 4 Max 10 x 1200mm acdc1771 Starter Lead acdc1768/2m (2000mm) acdc1768/5m (5000mm) Link Lead acdc1769/2m (2000mm) Fitting supplied as standard with input and output leads and connectors 50mm longer than fitting to enable seemless connection End Cap acdc1760 acdc1760/10m acdc1760/20m acdc1760/50m Wire Brown Blue Green/Yellow Shield White Black Connection + - Earth DMX Drain DMX + DMX - Dimmable 5 Max 10 x 1200mm DMX acdc1763/64 acdc1761 acdc /1200mm 800mm 1200mm 800mm DRIVER DRIVER DRIVER DRIVER Starter Lead acdc1760 acdc1760/10m acdc1760/10m acdc1760/50m Link Lead acdc mm link to link 800mm to next fitting. acdc mm link to link 1200mm to next fitting. acdc mm link to link 800mm fitting with 2m gap to next fitting. acdc mm link to link 1200mm fitting with 2m gap to next fitting. 800mm or 1200mm only Fitting supplied as standard with driver located underneath fitting. link lead required to butt fitttings up together. End Cap acdc

8 INSTALLATION INSTRUCTIONS with Sleeve x 1200mm Live Earth Neutral DMX + DMX- DMX Sheild Switched Brown Green Blue DMX Brown Green Blue White Black Silver acdc1768 acdc1768/10m acdc1768/20m acdc1768/50m 5 DMX acdc1771 acdc1760 acdc1760/10m acdc1760/20m acdc1760/50m 15 16

9 Specification sheet acdc1120 A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67 End Sleeve Lengths 65mm 52mm 91mm 91mm Flush endcap 408mm, 808mm or 1208mm Flanged endcap 456mm, 856mm or 1256mm Luminaire Material: Robust luminaire made from custom-made aluminium extrusion Finish: Extremely durable anodised aluminium black, anodised aluminium titanium. For especially demanding environments use hard anodised black*, hard anodised titanium*, chlorine anodised black*, chlorine anodised titanium*. Format: Three tilt options 0, 5 and 10 available. Lengths: Available in 3 lengths. Flush end cap: 408mm, 808mm,1208mm. Flanged end cap: 458mm, 858mm,1258mm. Beam angles: 18, 24, 30, 50 x 20 Glare control: Micro louvre to minimise glare and shield LEDs from view. Accessories: Flange mounted end cap with holes, flange mounted end cap (no holes), mounting sleeve kit, start leads, extension leads, interconnecting leads. Run: Fittings can be installed end to end for a continuous wallwash effect. Temperature range: From -20ºC to 50ºC Thermal management: Manufactured from bespoke grade aluminium extrusion for optimal heat management. *Upon request. Minimum order qauntity applies Specification Codes - Product acdc1120 Finishes aluminium titanium aluminium black Hard anodised titanium Hard anodised black Chlorine anodised titanium Choline anodised black AAT AAB HAT HAB CAT CAB LED Colour 2700ºK ºK ºK ºK 60 R R G G B B A A RGB RGB 59mm Optics 18º 18R 24º 24R 30º 30R 50ºx20º 50x20R Performance Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70. Initial lamp Lumen output*: 1420lm Lamp lumens inc thermal and optical losses*: 1208lm Luminaire Lumens output*: 531lm Power consumption (inc 85% efficient driver): 14.66W Efficacy (Lm/W)*: LED Pitch: 33mm, RGB 33mm CRI: >80 Binning: Colour consistency ensured across a project - 2 step MacAdam ellipse. LED Colour: 2700 K, 3000 K, 4200 K, 6000 K, R, G, B, A, RGB Driver: Switched, DMX Listings: CE, ETL us/c IP rating: IP67 Impact Resistence: IK07 Max Load: 1000kg Warranty: 5 years Weight: 4.5kg per metre *Based on 400mm, 50x20R optics, 0º tilt Dimming Dimmable Non-Dimmable DIM NON- DIM Length 400mm mm mm 1200 Angle of adjustment None 0ADJ 5º 5ADJ 10º 10ADJ IP Rating IP67 IP67 acdc1120 Specification Codes - Flange mounted end cap Specification Codes - Mounting sleeve kit Product acdc1754 End cap option Flange Mounted End Cap with countersunk holes Flange Mounted End Cap with no holes CSK NH Finishes Aluminium Titanium AluminiumBlack Hard Titanium Hard Black Chlorine Titanium Choline Black AAT AAB HAT HAB CAT CAB Product acdc1753 Length 400mm extrusion mm extrusion mm extrusion m cut on site 2500 end cap used with Standard End Cap STE Flanged End Cap FME acdc1754 acdc1753 This acdc product is Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency Supplied with a 5 year guarantee IP67 Specification subject to change without notice. Refer to our website for the most recent product documentation. acdclighting.com sales@acdclighting.com UK: +44 (0) USA: +1 (410) Dubai: +971 (0) E SPG207 Jun 2015

10 CONTACT Head Office Wordsworth House Vantage Court, Riverside Way Barrowford Lancashire UK BB9 6BP Tel: +44 (0) Fax: +44 (0) Manufacturing Innovation Works Gisburn Road Barrowford Lancashire UK BB9 8NB Tel: +44 (0) London Studio Ground Floor Central Block Green Mews Bevenden Street London N1 6AS Sales Tel: +44 (0) Deliveries Tel: +44 (0) Dubai Office Office 405, Goldcrest Executive Tower Cluster C - Jumeirah Lakes Towers (JLT) P.O. Box Dubai United Arab Emirates USA Office acdc corp, 841 E Fort Ave, #276 Baltimore, MD USA Tel: +971 (0) export@acdclighting.co.uk Tel: +1 (410) sales@acdclighting.us Global Distribution Network We have an established and growing global network of over 60 distributors and consider them a vital extension to our British, Dubai and North American based export teams. This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project. For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact export@acdclighting.co.uk Specification subject to change without notice. Refer to our website for the most recent product documentation