ARTEMIS acdc1032. A compact, exterior, fully submersible, discrete, triple LED marker light & wallwash luminaire, delivering 350lm.

Transcription

1 acdc1032 A compact, exterior, fully submersible, discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP B SPG305 Jun 2015

2 CONTENTS Product overview 05 Application images 07 Detailed product performance 09 Product drawings and images 10 Specification codes 11 Driver options 13 Installation instructions 15 Specification sheet 17 Contact details

3 OVERVIEW A compact, exterior, fully submersible, discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP68 Beam control for different features or specific details Available with clear glass for maximum output or frosted glass for minimal glare Aluminium CNC machined to aerospace tolerances Suitable for installation in the most challenging of exterior environments High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70 This product is dual binned within a 2 step MacAdam ellipse to ensure colour consistency A range of optics is available to suit every application: 12, 18, 30, 50 Choice of colour finishes available: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver, hard anodised black, chlorine anodised silver, chlorine anodised black Suitable for use in ambient temperatures ranging from -20ºC to 50ºC IP68 5 6

4 APPLICATION IMAGES GPO Westin. Sydney, Australia. Lighting Design: Point of View. Distribution partner: JSB Lighting. acdc LED product: (acdc1032) Finningeröndellen, Sweden. Lighting Design: Andreas Ejhed, Ljusarkitektur. Distribution partner: Rebel Light. acdc LED product: (acdc1032) 7 8

5 PRODUCT PERFORMANCE LED Type Cree LED Quantity 3 Drive Current 700mA(*SSB finish variant max 350mA) Power Consumption. Including 85% Efficient Driver 7.7W PFC Driver dependent (Typical 0.9) Colour Temp 2700ºK 3000ºK 4200ºK 6000ºK Initial Colour Accuracy 2 Step MacAdam Ellipse Colour Stability Over Life. Measured at 6000hrs 2 Step MacAdam Ellipse CRI Initial Lamp Lumen Output Initial Lamp Lumens per Circuit Watt Lamp Pro e t 1 Lumen Output including Thermal & Optical Losses Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt Luminaire U i ed i g o Lumen Output Luminaire Lumens per Circuit Watt Lifetime L70. Based on TM-21 >50,000 hours Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs Cat1/Code9 Based Lamps on12 1 x 3 x LE PRODUCT DRAWINGS & IMAGES - Angle of adjustment 65mmØ 160º 60mm 97mm Based on 3000ºK and 12 - Wall bracket (1:1 scale) 5.2mm UX TSI All acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime with lumen maintenance at L70 to guarantee product performance. Output data figures stated are typical values. 25.4mm 50.8mm To download photometric files please visit

6 SPECIFICATION CODES Finishes, Aluminium Silver, 3000 K, 18 acdc1032 / AAS / 30 / 18R RED Aluminium Silver Aluminium Black 12º Stainless Steel Brushed 2700 K 3000 K GREEN 18º Hard Silver Hard Black Chlorine Silver Chorline Black LED Colour 4200 K 6000 K BLUE AMBER RGB Optics 30º 50º Finishes Aluminium Silver Aluminium Black Stainless Steel Brushed Hard Silver* Hard Black* Chlorine Silver* Chlorine Black* AAS AAB SSB HAS HAB CAS CAB LED Colour 2700ºK ºK ºK ºK 60 Red R Green G Blue B Amber A RGB RGB Optics 12 12R 18 18R 30 30R 50 50R Additional option 100mm Garden Spike acdc1702 Emergency Pack For an emergency conversion pack please specify acdc1957 *Upon request. Minimum order quantity applies.

7 DRIVER OPTIONS Switched Live Neutral Images are for illustrative purposes only. 1-10v Live Neutral Images are for illustrative purposes only. Phase Live Neutral Dimmer Images are for illustrative purposes only. DALI Live Neutral Images are for illustrative purposes only. DMX Live Neutral Ground DMX in - DMX in + DMX in shield 1-10v Dimmer Dali Bus Isolated Dali Interface 3 LED Groups 3 Control Channels Switched Driver Code acdc1900/a/700/swt/none acdc1900/b/700/swt/none Dimensions 110 x 52 x 23.5 mm 180 x 32 x 32 mm Weight 100g 120g Input Voltage Vac Vrms Current 700mA 700mA Power Consumption 230V 33W Dimming Range None None Channels 1 1 Number of products driven per driver v Driver Code acdc1900/a/700/1-10/solo acdc1900/b/700/1-10/solo` Dimensions 110 x 52 x 23.5 mm 180 x 32 x 32 mm Weight 100g 120g Input Voltage Vac Vrms Current 700mA 700mA Power Consumption 230V 33W Dimming Range 0%-100% None Channels 1 1 Number of products driven per driver Phase Driver Code acdc1900/a/700/pha/none acdc1900/b/700/pha/none Dimensions 99mm x 39mm x 23.5mm 244 x 58 x 42 mm Weight 70g 240 gram Input Voltage V AC 230 Volt +/- 10% Current 700mA 700 Power Consumption 10.5W max 33.6W Dimming Range Min 20% Depends on dimmer capabilities Channels 1 1 Number of products driven per driver 1-4 LED's 2-4 DALI Driver Code acdc1900/a/700/dali/solo acdc1900/c/700/dali/solo Dimensions 210 x 40.4 x 33.5mm 180 x 32 x 32 mm Weight 225g 120g Input Voltage AC V / DC V Vrms Current 700mA 700mA Power Consumption 30w 30W Dimming Range 0%-100% Off, 10%-100% Channels 1 1 Number of products driven per driver DMX Driver Code acdc1900/e/700/dmx/multi Dimensions 388 x 42 x 30 mm Weight 705 g Input Voltage VAC Current 700 Power Consumption 100W max Dimming Range 0.1%-100% Channels 3 Number of products driven per driver 12 per Ch x 3ch 13 All images shown above are for illustrative purposes only. 14 Please refer to installation instructions for complete details

8 INSTALLATION INSTRUCTIONS mm 25.4mm 50.8mm 3 Only to be installed by a qualified electrician Installation must be carried out in accordance with local regulations Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at the fitting Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance) acdc luminaires are designed for lighting applications and must not be used for any other purpose acdc1702 A B 4 5 A B Ch1 Ch2 Ch Artemis 2000mm 0.5mm 2 Clear/cotton Clear Artemis RGB 2000mm 0.22mm 2 Red Black Green Yellow Blue White IP68 IP68 IP68

9 Specification sheet acdc1032 A compact, exterior, fully submersible, discrete, triple LED marker light & wallwash luminaire, delivering 350lm. IP68 Front view Angles of adjustment Bracket 65mmØ 5.2mm 160º 97mm 60mm 25.4mm 50.8mm Luminaire Material: Aluminium CNC machined to aerospace tolerances. Finish: stainless steel brushed. Extremely durable anodised aluminium silver, anodised aluminium black. For especially demanding environments use hard anodised silver*, hard anodised black*, chlorine anodised silver*, chlorine anodised black* Beam angles: 12, 18, 30, 50º. Accessories: Garden spike (100mm) Installation: Suitable for installation in the most challenging of exterior environments. Temperature range: From -20ºC to 50ºC *Upon request. Minimum order quantity applies. Performance Lumen Maintenance: High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70. Initial lamp Lumen output*: 438lm Lamp lumens inc thermal and optical losses*: 372lm Luminaire Lumens output*: 331lm Power consumption (inc 85% efficient driver): 7.7W Efficacy (Lm/W)*: 43 CRI: 80 Binning: Dual binned for optimum colour consistency across a project - 2 step MacAdam ellipse. LED Colour: 2700ºK, 3000ºK, 4200ºK, 6000ºK, R, G, B, A, RGB Driver: Switched, 1-10v, Phase, Dali, DMX Listings: CE, ETL us/c IP rating: IP68 Warranty: 5 years Weight: Stainless steel 1010g, aluminium 600g *Based on 3000ºK with 12º optics Specification Codes Driver options Product acdc1032 Bezel Finishes aluminium silver aluminium black Stainless steel brushed Hard anodised silver Hard anodised black Chlorine anodised silver Choline anodised black AAS AAB SSB HAS HAB CAS CAB LED Colour 2700ºK ºK ºK ºK 60 R R G G B B A A Optics 12º 12R 18º 18R 30º 30R 50º 50R Driver acdc1900 No. of Luminaires if known Current 700mA Dimming Type SWT 1-10 Phase DALI DMX RGB RGB acdc1032 acdc mA Ground spike 100mm - acdc17020 This acdc product is Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency Supplied with a 5 year guarantee IP68 Specification subject to change without notice. Refer to our website for the most recent product documentation. acdclighting.com sales@acdclighting.com UK: +44 (0) USA: +1 (410) Dubai: +971 (0) B SPG305 Jun 2015

10 CONTACT Head Office Wordsworth House Vantage Court, Riverside Way Barrowford Lancashire UK BB9 6BP Tel: +44 (0) Fax: +44 (0) Manufacturing Innovation Works Gisburn Road Barrowford Lancashire UK BB9 8NB Tel: +44 (0) London Studio Ground Floor Central Block Green Mews Bevenden Street London N1 6AS Sales Tel: +44 (0) Deliveries Tel: +44 (0) Dubai Office Office 405, Goldcrest Executive Tower Cluster C - Jumeirah Lakes Towers (JLT) P.O. Box Dubai United Arab Emirates USA Office acdc corp, 841 E Fort Ave, #276 Baltimore, MD USA Tel: +971 (0) export@acdclighting.co.uk Tel: +1 (410) sales@acdclighting.us Global Distribution Network We have an established and growing global network of over 60 distributors and consider them a vital extension to our British, Dubai and North American based export teams. This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project. For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact export@acdclighting.co.uk Specification subject to change without notice. Refer to our website for the most recent product documentation.