LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH BLACK & GALVANIZED STEEL PIPE
|
|
- Alisha Harrington
- 7 years ago
- Views:
Transcription
1 FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH BLACK & GALVANIZED STEEL PIPE Phone: Fax: MKT-23 Prices Effective 01/15/2011
2 FITTINGS FOR STEEL PIPE THE QUICKEST & EASIEST WAY TO CONNECT STEEL PIPE Tabs EPDM Gasket FASTLOCK fittings provide the quickest and easiest way to connect schedules 10 through 40 black and galvanized ASTM A53 compliant steel pipe. FASTLOCK fittings are available in a complete range of sizes from ½" 2". FASTLOCK fittings install without the use of threading dies, pipe sealants, or pipe wrenches; significantly reducing average installation time, saving time and money. Because they connect without wrenches, FAST- LOCK fittings reduce stress on joists and hangers during installation. FASTLOCK fittings feature Sure Connect technology that ensures unpressed connections are detected during pressure testing. FASTLOCK press jaws are compatible with most press tools on the market, including Ridgid, Rothenberger, REMS, and Stanley VIRAX. FASTLOCK fittings feature a specialized, corrosion-resistant, malleable cast iron body with stainless steel fastening rings and EPDM sealing gaskets. Applications include water, HVAC, and compressed air systems. ISO Certified, IAPMO Approved, NSF 61-4 Certified Stainless Steel Gripping Ring Before Press Connection Pressing Area EPDM Gasket 316 Stainless Steel Ring ASTM A53 Steel Pipe Zinc Coating Stop Malleable Cast Iron Body FASTLOCK fittings are made from malleable cast iron. The annealing process used in their manufacturing provides them with a greater malleability well suited for press connections. During manufacturing, all FASTLOCK fittings are hot-dipped in 99.99% pure, molten zinc. This process completely coats the fittings surface inside and outside, giving them additional strength and providing a resistance to oxide corrosion, making them excellent for use in drinking water systems. FASTLOCK fittings ensure a tightly sealed connection utilizing a pre-assembled sealing gasket and stainless steel gripping ring. The thick EPDM sealing gasket provides a wide contact surface between the fitting and the pipe, ensuring the connection is air and water tight after pressing. The AISI 316L stainless steel ring grips the pipe and prevents it from pulling out, even in cases of very high pressure. Tabs on the fitting end retain the sealing gasket and stainless steel gripping ring. The diagram below illustrates how all of these features provide FASTLOCK fittings with a strong and secure press connection. After Press Connection EPDM Gasket Pressing Area 316 Stainless Steel Ring ASTM A53 Steel Pipe Pipes for FASTLOCK FASTLOCK fittings are for use with ASTM A53 compliant ½" 2" schedule 10 through schedule 40 black and galvanized steel pipe only. Press Tools for FASTLOCK FASTLOCK fittings must be used with FASTLOCK approved press jaws only. FASTLOCK jaws are compatible with press tools from Ridgid, Rothenberger, REMS, and Stanley VIRAX. The press tool must be for sizes up to 2" with a press force of at least 32kN and operating either at 110 volts or on battery power. Operating Parameters Operating Temperature: F Maximum Operating Pressure: 200 PSI Warranty FASTLOCK fittings carry a 50 year limited warranty against defects in material and workmanship when properly installed and used under normal circumstances. Approvals ISO 9001:2000 Certified IAPMO Approved: Uniform Plumbing Code NSF-61-4 Certified
3 FITTINGS FOR STEEL PIPE QUICK & EASY INSTALLATION Verify the outside diameter of the pipe is compliant to ASTM A53 standards. Cut the pipe perpendicular to its axis. Deburr the end of the pipe to avoid damaging the gasket. Make sure the pipe is free of debris, rust, paint, scale, etc. Verify the presence, integrity and correct positioning of the gasket and metal ring. If necessary, lubricate the pipe and fitting with approved silicone spray Mark the insertion depth on the pipe. Insert the pipe into the fitting until it makes contact with the stop. Complete the press connection using FASTLOCK jaws in accordance with your press tool s instructions. Verify the press connection. NOTE: Connections MUST be made on ASTM A53 compliant pipe using FASTLOCK approved jaws ONLY. The instructions above are provided as a brief overview of the installation process. Before using any FASTLOCK products, read the complete Technical Manual. Complete installation instructions can be found in the Technical Manual or at ORDERING INFORMATION FASTLOCK fittings are available from Cimberio Valve Company, Inc. Freight Policy: Cimberio Valve standard freight terms apply to all orders placed for delivery to a single destination in the continental United States. Contact your local distributor for specific details. Otherwise, freight items are F.O.B. Malvern, Pennsylvania To read Cimberio Valve s complete freight policy, visit us online at and click on the Policies link at the bottom of the page. Order Acceptance: Orders are accepted by fax ( ) or (orders@cimberiovalve.com). Possession of any of our catalogs or list price books by any person is not to be construed as an offer to sell to that person. All prices are subject to change without notice. Minimum Order: There is NO minimum order at Cimberio Valve. Payment Terms: All invoice terms are Net 30 from the date of Cimberio Valve invoices. Invoices may now be paid by credit card. Cimberio Valve accepts Visa, MasterCard, and Discover. Before paying by credit card you must fax a completed Credit Card Authorization Form to us at This form can be downloaded from on the Policies page (the link appears on the bottom of the page) or you can request the form by phone at FASTLOCK Fittings Are Available Through Wholesalers Only
4 FITTINGS FOR STEEL PIPE FASTLOCK Tools Part No. Description Price VALBFKIT01 ½" 1" Kit (Includes: ½" Jaws, ¾" Jaws, 1" Jaws, Pipe Gauge, Pipe Deburrer, and Carrying Case) $ ½" Jaws Only $ ¾" Jaws Only $ " Jaws Only $ VALBFKIT02 1¼" 2" Kit (Includes: 1¼" Collar, 1½" Collar, 2" Collar, 1¼" 2" Actuator, Pipe Gauge, Pipe Deburrer, and Carrying Case) $4, ¼" 2" Actuator Only $ ¼" Collar Only $1, ½" Collar Only $1, " Collar Only $1, Pipe Deburrer Only $59.73 ½ ¾ 1 ½" JAWS ¾" JAWS 1" JAWS ACTUATOR PIPE DEBURRER 1¼ 1½ 2 1¼" COLLAR 1½" COLLAR 2" COLLAR Contractors Earn Points Towards FREE FASTLOCK Products with the Get To The Point Program! Visit for more information. PLAIN END Item No Elbow: Press x Press Item No Elbow: Press x P.E. ½" 90BLK-04 $ HDG-04 $ ¾" 90BLK-06 $ HDG-06 $ " 90BLK-07 $ HDG-07 $ ¼" 90BLK-08 $ HDG-08 * $ ½" 90BLK-09 $ HDG-09 * $ " 90BLK-10 $ HDG-10 * $ ½" 91BLK-04 $ HDG-04 * $ ¾" 91BLK-06 $ HDG-06 * $ " 91BLK-07 $ HDG-07 * $ ¼" 91BLK-08 $ HDG-08 * $ ½" 91BLK-09 $ HDG-09 * $ " 91BLK-10 $ HDG-10 * $ FE Item No Elbow: Press x FIPT Item No Elbow: Press x MIPT ½" 93BLK-04 $ HDG-04 $ ¾" 93BLK-06 $ HDG-06 $ " 93BLK-07 $ HDG-07 $ ¼" 93BLK-08 $ HDG-08 $ ½" 93BLK-09 $ HDG-09 $ " 93BLK-10 $ HDG-10 $ ½" 92BLK-04 $ HDG-04 * $ ¾" 92BLK-06 $ HDG-06 * $ " 92BLK-07 $ HDG-07 * $ ¼" 92BLK-08 $ HDG-08 * $ ½" 92BLK-09 $ HDG-09 * $ " 92BLK-10 $ HDG-10 * $
5 FITTINGS FOR STEEL PIPE Item No. 130 Tee: Press Run x Press Branch Item No. 132 Slip Tee: Press Run x Press Branch SLIP ½" 130BLK-04 $ HDG-04 $ ¾" 130BLK-06 $ HDG-06 $ " 130BLK-07 $ HDG-07 $ ¼" 130BLK-08 $ HDG-08 $ ½" 130BLK-09 $ HDG-09 $ " 130BLK-10 $ HDG-10 $ ½" 132BLK-04 $ HDG-04 $ ¾" 132BLK-06 $ HDG-06 $ " 132BLK-07 $ HDG-07 $ ¼" 132BLK-08 $ HDG-08 * $ ½" 132BLK-09 $ HDG-09 * $ " 132BLK-10 $ HDG-10 * $ FE Item No. 133 Tee - Reducing: Press Run x Reduced Press Branch This item is currently in production and may be supplied as a 130 Tee and 247 Adapter if fitting is unavailable. Item No. 131 Tee - Reducing: Press Run x Reduced FIPT Branch This item is currently in production and may be supplied as a 130 Tee and 243 Adapter if fitting is unavailable. (Run x Branch) 1½" x ½" 133BLK-0904 * $ HDG-0904 * $ ½" x ¾" 133BLK-0906 * $ HDG-0906 * $ " x ½" 133BLK-1004 * $ HDG-1004 * $ " x ¾" 133BLK-1006 * $ HDG-1006 * $ The following sizes are sold as a pre-assembled 130 Tee and 247 Adapter ¾" x ½" 133BLK-0604 * $ HDG-0604 * $ " x ½" 133BLK-0704 * $ HDG-0704 * $ " x ¾" 133BLK-0706 * $ HDG-0706 * $ ¼" x ½" 133BLK-0804 * $ HDG-0804 * $ ¼" x ¾" 133BLK-0806 * $ HDG-0806 * $ ¼" x 1" 133BLK-0807 * $ HDG-0807 * $ ½" x 1" 133BLK-0907 * $ HDG-0907 * $ ½" x 1¼" 133BLK-0908 * $ HDG-0908 * $ " x 1" 133BLK-1007 * $ HDG-1007 * $ " x 1¼" 133BLK-1008 * $ HDG-1008 * $ " x 1½" 133BLK-1009 * $ HDG-1009 * $ (Run x Branch) 1" x ½" 131BLK-0704 $ HDG-0704 $ ¼" x ½" 131BLK-0804 $ HDG-0804 $ ½" x ½" 131BLK-0904 $ HDG-0904 $ ½" x ¾" 131BLK-0906 * $ HDG-0906 * $ " x ½" 131BLK-1004 $ HDG-1004 $ " x ¾" 131BLK-1006 $ HDG-1006 $ The following sizes are sold as a pre-assembled 130 Tee and 243 Adapter ¾" x ½" 131BLK-0604 * $ HDG-0604 * $ " x ¾" 131BLK-0706 * $ HDG-0706 * $ ¼" x ¾" 131BLK-0806 * $ HDG-0806 * $ ¼" x 1" 131BLK-0807 * $ HDG-0807 * $ ½" x 1" 131BLK-0907 * $ HDG-0907 * $ ½" x 1¼" 131BLK-0908 * $ HDG-0908 * $ " x 1" 131BLK-1007 * $ HDG-1007 * $ " x 1¼" 131BLK-1008 * $ HDG-1008 * $ " x 1½" 131BLK-1009 * $ HDG-1009 * $
6 FITTINGS FOR STEEL PIPE Item No. 270 Coupling: Press x Press Item No. 271 Slip Coupling: Press x Press SLIP ½" 270BLK-04 $ HDG-04 $ ¾" 270BLK-06 $ HDG-06 $ " 270BLK-07 $ HDG-07 $ ¼" 270BLK-08 $ HDG-08 * $ ½" 270BLK-09 $ HDG-09 * $ " 270BLK-10 $ HDG-10 * $ ½" 271BLK-04 $ HDG-04 $ ¾" 271BLK-06 $ HDG-06 $ " 271BLK-07 $ HDG-07 $ ¼" 271BLK-08 $ HDG-08 * $ ½" 271BLK-09 $ HDG-09 * $ " 271BLK-10 $ HDG-10 * $ FE Item No. 276 Coupling - Reducing: Press x Reduced Press This item is currently in production and may be supplied as a 270 Coupling and 247 Adapter if fitting is unavailable. ¾" x ½" 276BLK-0604 * $ HDG-0604 * $ " x ¾" 276BLK-0706 * $ HDG-0706 * $ ¼" x 1" 276BLK-0807 * $ HDG-0807 * $ ½" x 1¼" 276BLK-0908 * $ HDG-0908 * $ " x 1½" 276BLK-1009 * $ HDG-1009 * $ Item No. 272 Coupling: Press x FIPT ½" 272BLK-04 * $ HDG-04 * $ ¾" 272BLK-06 * $ HDG-06 * $ " 272BLK-07 * $ HDG-07 * $ ¼" 272BLK-08 * $ HDG-08 * $ ½" 272BLK-09 * $ HDG-09 * $ " 272BLK-10 * $ HDG-10 * $ Item No. 274 Coupling: Press x MIPT This item is currently in production and may be supplied as a 270 Coupling and 240 Adapter if fitting is unavailable. Item No. 300 Cap: Press ½" 274BLK-04 * $ HDG-04 * $ ¾" 274BLK-06 * $ HDG-06 * $ " 274BLK-07 * $ HDG-07 * $ ¼" 274BLK-08 * $ HDG-08 * $ ½" 274BLK-09 * $ HDG-09 * $ " 274BLK-10 * $ HDG-10 * $ ½" 300BLK-04 $ HDG-04 * $ ¾" 300BLK-06 $ HDG-06 * $ " 300BLK-07 $ HDG-07 * $ ¼" 300BLK-08 $ HDG-08 * $ ½" 300BLK-09 $ HDG-09 * $ " 300BLK-10 $ HDG-10 * $
7 FITTINGS FOR STEEL PIPE FE PLAIN END Item No. 331 Union - Flat: FIPT x P.E. ½" 331BLK-04 $ HDG-04 $ ¾" 331BLK-06 $ HDG-06 $ " 331BLK-07 $ HDG-07 $ ¼" 331BLK-08 $ HDG-08 $ ½" 331BLK-09 $ HDG-09 $ " 331BLK-10 $ HDG-10 $ Item No. 341 Union - Tapered: FIPT x P.E. FE PLAIN END ½" 341BLK-04 $ HDG-04 $ ¾" 341BLK-06 $ HDG-06 $ " 341BLK-07 $ HDG-07 $ ¼" 341BLK-08 $ HDG-08 $ ½" 341BLK-09 $ HDG-09 $ " 341BLK-10 $ HDG-10 $ Item No Ball Valve: Press x Press This item is currently in production and will be supplied as a Cim 17 Valve and two 274 Couplings. Coming Soon! Call For Availability ½" 1270BLK HDG-04 ¾" 1270BLK HDG-06 1" 1270BLK HDG-07 1¼" 1270BLK HDG-08 1½" 1270BLK HDG-09 2" 1270BLK HDG-10 PLAIN END (a) Item No. 242 Adapter: P.E. (a) x Reduced P.E. (b) ¾" x ½" 242BLK-0604 $ HDG-0604 * $ " x ½" 242BLK-0704 $ HDG-0704 * $ " x ¾" 242BLK-0706 $ HDG-0706 * $ ¼" x ½" 242BLK-0804 $ HDG-0804 * $ ¼" x ¾" 242BLK-0806 $ HDG-0806 * $ ¼" x 1" 242BLK-0807 * $ HDG-0807 * $ ½" x ¾" 242BLK-0906 * $ HDG-0906 * $ ½" x 1" 242BLK-0907 * $ HDG-0907 * $ ½" x 1¼" 242BLK-0908 * $ HDG-0908 * $ " x ¾" 242BLK HDG " x 1" 242BLK-1007 * $ HDG-1007 * $ " x 1¼" 242BLK-1008 * $ HDG-1008 * $ " x 1½" 242BLK-1009 * $ HDG-1009 * $ PLAIN END (a) Item No. 247 Adapter: P.E. (a) x Reduced Press (b) PLAIN END (b) END (b) ¾" x ½" 247BLK-0604 $ HDG-0604 * $ " x ½" 247BLK-0704 $ HDG-0704 * $ " x ¾" 247BLK-0706 $ HDG-0706 * $ ¼" x ½" 247BLK-0804 $ HDG-0804 * $ ¼" x ¾" 247BLK-0806 $ HDG-0806 * $ ¼" x 1" 247BLK-0807 $ HDG-0807 * $ ½" x ½" 247BLK-0904 $ HDG-0904 * $ ½" x ¾" 247BLK-0906 $ HDG-0906 * $ ½" x 1" 247BLK-0907 $ HDG-0907 * $ ½" x 1¼" 247BLK-0908 $ HDG-0908 * $ " x ½" 247BLK-1004 $ HDG-1004 * $ " x ¾" 247BLK-1006 $ HDG-1006 * $ " x 1" 247BLK-1007 $ HDG-1007 * $ " x 1¼" 247BLK-1008 $ HDG-1008 * $ " x 1½" 247BLK-1009 $ HDG-1009 * $
8 FITTINGS FOR STEEL PIPE Item No. 529 Adapter: FIPT x P.E. FE PLAIN END Item No. 240 Adapter: P.E. x MIPT ½" 529BLK-04 $ HDG-04 * $ ¾" 529BLK-06 $ HDG-06 * $ " 529BLK-07 $ HDG-07 * $ ¼" 529BLK-08 $ HDG-08 * $ ½" 529BLK-09 $ HDG-09 * $ " 529BLK-10 $ HDG-10 * $ PLAIN END ½" 240BLK-04 $ HDG-04 * $ ¾" 240BLK-06 $ HDG-06 * $ " 240BLK-07 $ HDG-07 * $ ¼" 240BLK-08 $ HDG-08 * $ ½" 240BLK-09 $ HDG-09 * $ " 240BLK-10 $ HDG-10 * $ Item No. 243 Adapter: P.E. (a) x Reduced FIPT (b) PLAIN END (a) FE (b) ¾" x ½" 243BLK-0604 $ HDG-0604 * $ " x ½" 243BLK-0704 $ HDG-0704 * $ " x ¾" 243BLK-0706 $ HDG-0706 * $ ¼" x ½" 243BLK-0804 $ HDG-0804 * $ ¼" x ¾" 243BLK-0806 $ HDG-0806 * $ ¼" x 1" 243BLK-0807 $ HDG-0807 * $ ½" x ½" 243BLK HDG-0904 $ ½" x ¾" 243BLK-0906 $ HDG-0906 * $ ½" x 1" 243BLK-0907 $ HDG-0907 * $ ½" x 1¼" 243BLK-0908 * $ HDG-0908 * $ " x ½" 243BLK HDG " x ¾" 243BLK HDG " x 1" 243BLK-1007 * $ HDG-1007 * $ " x 1¼" 243BLK-1008 * $ HDG-1008 * $ " x 1½" 243BLK-1009 * $ HDG-1009 * $ PLAIN END (a) Item No. 241 Adapter: P.E. (a) x Reduced MIPT (b) (b) ¾" x ½" 241BLK-0604 * $ HDG-0604 * $ " x ½" 241BLK-0704 * $ HDG-0704 * $ " x ¾" 241BLK-0706 * $ HDG-0706 * $ ¼" x ½" 241BLK-0804 * $ HDG-0804 * $ ¼" x ¾" 241BLK-0806 * $ HDG-0806 * $ ¼" x 1" 241BLK-0807 * $ HDG-0807 * $ ½" x ¾" 241BLK-0906 * $ HDG-0906 * $ ½" x 1" 241BLK-0907 * $ HDG-0907 * $ ½" x 1¼" 241BLK-0908 * $ HDG-0908 * $ " x ¾" 241BLK HDG " x 1" 241BLK-1007 * $ HDG-1007 * $ " x 1¼" 241BLK-1008 * $ HDG-1008 * $ " x 1½" 241BLK-1009 * $ HDG-1009 * $ FE (a) Item No. 246 Adapter: FIPT (a) x Reduced P.E. (b) PLAIN END (b) ¾" x ½" 246BLK-0604 $ HDG-0604 * $ " x ½" 246BLK-0704 $ HDG-0704 * $ " x ¾" 246BLK-0706 $ HDG-0706 * $ ¼" x ½" 246BLK-0804 $ HDG-0804 * $ ¼" x ¾" 246BLK-0806 $ HDG-0806 * $ ¼" x 1" 246BLK-0807 $ HDG-0807 * $ ½" x ¾" 246BLK-0906 $ HDG-0906 * $ ½" x 1" 246BLK-0907 $ HDG-0907 * $ ½" x 1¼" 246BLK-0908 * $ HDG-0908 * $ " x 1" 246BLK-1007 * $ HDG-1007 * $ " x 1¼" 246BLK-1008 * $ HDG-1008 * $ " x 1½" 246BLK-1009 * $ HDG-1009 * $
LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationMueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationTHERMOSTATIC MIXING VALVE TRIM K-T9493, K-T9494
THERMOSTATIC MIXING VALVE TRIM K-T9493, K-T9494 1. BEFORE YOU BEGIN IMPORTANT INSTRUCTIONS READ AND SAVE FOR THE CONSUMER WARNING: Risk of scalding or other severe injury. Before completing installation,
More informationOverview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer
Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve
More informationA. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.
13310 FABRIC SHADE STRUCTURES FOR PLAYGROUND AREAS ************************************************************************************************************************ SPECIFIER: CSI Master Format
More informationSECTION LS 2530 SANITARY SEWERS. A. General: Submit the following in accordance with The General Conditions.
SECTION LS 2530 SANITARY SEWERS PART 1 GENERAL 1.1 SUBMITTALS A. General: Submit the following in accordance with The General Conditions. 1. Product data for drainage piping specialties. 2. Shop drawings
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationWAVELET WATER QUALITY MONITORING KIT
AYYEKA Rethink Water Monitoring WAVELET WATER QUALITY MONITORING KIT ON OFF QUICK START GUIDE AYYEKA IMPORTANT! Use with pressure applications up to 145 PSI. Contact AYYEKA SUPPORT center for technical
More informationLIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D.
LIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D. INTRODUCTION The purpose of the American Galvanizers Association s wire study was to determine the working load limit for support wire that
More informationEngineering Specifications
PUREFLOW PEX PRODUCTS PART 1 GENERAL 1.1 SUMMARY 1.1.1 This specification covers Branch & Main, Parallel Water Distribution Systems (MANABLOC), Cross-linked Polyethylene tubing and fittings using PEX Press
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #03090414-H Hex Head Drivall Screws (246) Product: Item# Description Unit Pack 08050H3 8 x 1/2-in, Hex Head, Drivall, Clear Zinc, Bulk 10,000 12150H3RG 12 x 1-1/2-in, Hex
More informationPVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationSECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
More informationSTC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting
STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting Female NPT Thread 3/8 OD Tube 3/8 Push-In Fitting 2P050 Series Solenoid Valve Specifications Valve Model 2P050-1/4 2P050-3/8
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationMueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
More informationCATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
More informationInstallation Instructions
Installation Instructions E19-120 (Plastic showerhead) E19-120A (Stainless steel showerhead) E19-120SS (All Stainless Steel) Drench Shower - Horizontal Supply Table of Contents Pre-Installation Information..........................2.............................3
More informationUtility Distribution Systems
Utility Distribution Systems 6/2012 A0011037 1 WARRANTY This equipment is warranted to be free from defects in materials and workmanship, under normal use and service, for a period of 12 months from date
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationSECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
More informationLEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code
LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationUni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product
United McGill products Uni-Quick TM An enterprise of United McGill Corporation Family owned and operated since 1951 Moveable Duct System DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More information08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
More informationInstallation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationA New Improved Range of Push-fit Fittings for Cold Water Services
A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold
More informationWastewater Capital Projects Management Standard Construction Specification
CITY AND COUNTY OF DENVER ENGINEERING DIVISION Wastewater Capital Projects Management Standard Construction Specification 10.1 Precast Concrete Pipe 10.1.1 General This section covers material requirements,
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More information2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. SPECIFICALLY TO BE USED TO INSTALL FLOW & RETURN PIPES FROM SOLAR PANEL TO STORAGE TANK
2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. Flexible stainless steel pipe Solar UV resistant protective sheath Break joint for easy separation Integrated two-core sensor cable Closed cell elastomeric foam
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationModel # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationGeberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
More informationstainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationDIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING REPORT HOLDER: CURAFLO IP LLC 4035 E. OASIS STREET MESA, AZ 85215
0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted PMG 1057 Valid: 02/15 to 02/16 DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationThe EDGE Self-Sealing Round Duct System
The EDGE Self-Sealing Round Duct System Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903 Ph: 607.733.9988 www.stampedfittings.com Submittal Sheet The EDGE Features, Benefits & Materials
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationDiamond LOK-21 Assembly Information
Diamond LOK-21 Assembly Information Proper assembly of a Diamond LOK-21 is much like that of conventional bell-and-spigot PVC pressure pipe. Proper assembly of the joint requires: A clean bell and spigot,
More informationINSTALLATION INSTRUCTIONS. SharkBite. Connection System. The SharkBite System
INSTALLATION INSTRUCTIONS SharkBite Connection System The SharkBite System The SharkBite connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationQuick- Connect. Quick-Connect Plumbing Products Catalog and Price List. Effective February 29, 2016. Watts. c om
Quick- Connect Quick-Connect Plumbing Products Catalog and Price List Effective February 29, 2016 Watts. c om Sizing Matrix Example: 3575-10 = Series 35, Type 75, 1 2" CTS 3 8 CTS = 08 1 4 OD = 04 1 8
More informationRental Services Temporary Cooling - Flexible Water Hose
Engineering Bulletin Rental Services Temporary Cooling - Flexible Water Hose September 2006 CHS-PRB007-EN Warnings and Cautions Warnings and Cautions. Notice that warnings and cautions appear at appropriate
More informationRMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationTECHNICAL DATA. Dry 122a. November 12, 2013
Dry 122a 1. PRODUCT DESCRIPTION The Viking is a quick-opening device. When installed with the required external Anti-flood Device, the assembly is designed to increase the operating speed of Viking Model
More informationENGINEER S LIST OF APPROVED ITEMS POTABLE WATER SYSTEM
ENGINEER S LIST OF APPROVED ITEMS POTABLE WATER SYSTEM General 1. All products must be NSF 61 approved for potable water service 2. All products with brass or bronze must be lead free 3. Advanced written
More informationModel Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationDRESSER TM PIPELINE SOLUTIONS
Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL
INSTALLATION, OPERATION & MAINTENANCE MANUAL Flanged Disk Check Valve with Strainer Ref. GENEBRE: 2450 2451 2452 1 INSTRUCTIONS FOR INSTALLATION, OPERATION & MAINTENANCE MANUAL 1. Spare parts... 3 1.1
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 2.60 1 1/2" 601120 125 9,000 1.74 2" 601138 100 4,800 2.34 3" 601146 45 1,440 6.57 4" 601153 25 800
More informationPIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT
PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT GENERAL INFORMATION 1.1 This section applies to piping systems for chilled water, hot water, condenser water, steam, condensate return, fuel oil, refrigerant
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationVSH Press Sprinkler Galvanized System
www.vsh-fittings.com VSH Press Sprinkler Galvanized System VSH Fittings Netherlands 09 VSH Fittings B.V. Post Box 498 1200 AL Hilversum The Netherlands Tel. +31 (0)35 688 42 11 Fax +31 (0)35 688 43 79
More informationLS 2540 SEWER LATERALS AND INSPECTION TEES
LS 2540 SEWER LATERALS AND INSPECTION TEES A. Summary B. Submittals C. Site Information D. Sewer Pipe and Fittings E. Lateral Locations F. Lateral Installation G. Inspection Tee Installation H. Removal
More informationPipe Repair Products A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
More informationFire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationSECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent
More informationSection 02702 SEWER PIPE INSTALLATION AND TESTING
PART 1 - GENERAL Section 02702 SEWER PIPE INSTALLATION AND TESTING 1-1. SCOPE. This section covers the installation and testing of all sewer pipe furnished under the following specification sections: Concrete
More informationPlumbing Specialties
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Plumbing Specialties QUALITY Most manufacturing facilities are certified to ISO standards ISO Quality Plus
More information1998½-2007 Dodge Ram 5.9L Cummins
9 January 2014 1081130-33 Dodge Cummins Low Fuel Pressure Alarm Light Kit (I-00143) 1 1998½-2007 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationVXT. Open Cooling Towers. Open Cooling Towers. Product Detail VXT - B 1. Engineering Data... B2. Structural Support... B6
- B 1 Product Detail Engineering Data... B2 Structural Support... B6 Engineering Specifications... B9 - B 2 Engineering Data REMARK: Do not use for construction. Refer to factory certified dimensions &
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationThe Ford Model A Water Pump
The Ford Model A Water Pump George Washington Chapter, Inc. 3903 Old Lee Highway Fairfax, VA 22030 1 Table of Contents Introduction/Specifications.. 3 1. Water Pump Inspection and Removal. 4 a. Removal..
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationInstallation Guide 2010 BMW S1000RR Full Exhaust System
Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade
More informationSECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION
SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION PART 1 GENERAL.01 SECTION INCLUDES Furnishing and installing 4 inch through 16 inch high density
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationBelow Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon. Installation Instructions
Below Grade Spill Containment Manholes 705-5 Gallon 715-15 Gallon 725-25 Gallon Installation Instructions Warning Application and use of this product should be in compliance with local, state, and federal
More informationMechanical Products. Mechanical Products M06-1
Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More information