Roller blind systems. Model 250A. Roller blind mechanism plastic white 250A. Interior shading

Transcription

1 Interior shading Roller blind systems Model 250A Roller blind mechanism plastic white 250A Roller blind systems with a chain or power operated mechanism Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

2 Roller blind systems Model 250A Roller blind with plastic mechanism 250Α Description of parts Roller blind Mechanism 250Α Roller blind mechanism 25 mm plastic white. Clipped to mechanism brackets, white plastic with internal metal clutch spring. Roller tube Roller blind tube 25 mm with adhesive tape. Bottom rail Roller blind bottom rail round aluminium. Bottom rail end cups Plastic Roller blind end cup Chain White plastic, operating chain ball or Metal chain ball Technical Description 250Α System Dimensions White plastic roller blind mechanism (4.5x5.5 cm) with chain, type 250Α, click type. It has an integrated metal clutch spring mechanism to lock the position and prevent unwanted roll down of the roller without the use of the chain. White plastic brackets, with the option to install on walls or ceilings. If the installation of the plastic brackets is impeded by the nature of the wall or ceiling surface, or in the case of larger sized systems, it is possible to use white extruded aluminium profile to install the mechanism. In this case, white metal brackets are used. The number of brackets is determined by the width of the system. The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod. Plastic round endcups for bottom rail, are provided for decorative purposes. White plastic chain ball, or optionally chain ball, mainly for use in large sized systems (height greater than 2 meters), optionally choice between an endless or with a clip. If an endless chain is chosen, there is the option to use chain counterweight. Manufactured Dimensions Maximum width Maximum height Comments 1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected 4,5 cm Aluminium roller tube has 25mm with adhesive tape to secure the fabric. 5,5 cm

3 Interior shading Roller blind systems Model 250TR Roller blind mechanism translucent 250TR Roller blind systems with a side chain or power operated mechanisms Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

4 Roller blind systems Model 250TR Roller blind with translucent mechanism 250TR Description of parts Roller blind Mechanism 250TR Roller blind mechanism click type translucent Roller tube Roller blind tube, 25mm, with adhesive tape. Bottom rail Roller blind bottom rail round Aluminium Bottom rail endcups Plastic Roller blind end cup Chain Translucent operating chain ball. Technical Description 250TR System Dimensions Translucent Roller blind mechanism click type 250TR. It has an integrated metal catch spring mechanism to lock the position and prevent unwanted roll down of the roller without the use of the chain. Translucent plastic brackets, with the option to install on walls or ceilings. If the installation of the plastic brackets is impeded by the nature of the wall or ceiling surface, or in the case of larger sized systems, it is possible to use white extruded aluminium profile to install the mechanism. In this case, white metal brackets are used. The number of brackets is determined by the width of the system. The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod. Plastic round end cups for bottom rail, provided for decorative purposes. Translucent plastic operation chain ball, or optionally, metal chain ball, mainly for use in large sized system (height greater than 2m). Optionally choice of an endless cord chain with clip. If endless chain is chosen, there is the option to use a chain counterweight. Manufacturable Dimensions Maximum width Maximum height Comments 1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected 4,5 cm Aluminium roller tube has a diameter of 25mm, and uses adhesive tape to secure the fabric. 5,5 cm

5 Interior shading Roller blind systems Model 250M Roller blind mechanism metal 250Μ Roller blind systems with a side chain or power operated mechanisms Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

6 Roller blind systems Model 250M Roller blind with metal mechanism 250Μ Description of parts Roller blind Mechanism 250M Easy operation metal mechanism and brackets, in silver, grey or bronze Roller tube Roller blind tube 25mm, with adhesive tape Bottom rail Roller blind bottom rail round Aluminium Bottom rail end cups Plastic Roller blind end cup Chain Metal operating chain ball Technical Description Metal silver or bronze colour roller blind mechanism (4.5x5.5 cm) with chain, type 250Α. It has a position catch and release system, in order to facilitate easy installation on the brackets. Metal brackets in silver or bronze, with the option to install on walls or ceilings. The aluminium roller tube has a diameter of 25mm, and uses adhesive tape to secure the fabric. Metal operation chainball. Optionally choice of endless cord chain with clip. If endless chain is chosen, there is the option to use a chain counterweight. 250M System Dimensions Manufacturable Dimensions Maximum width Maximum height Comments 1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube with a special groove for insertion of the dowel rod. 4,5 cm Plastic round end cups for bottom rail provided for decorative purposes. 5,5 cm

7 Interior shading Roller blind systems Model 320A Roller blind mechanism plastic white 320A Roller blind systems with a side chain or power operated mechanism Optima roller blind shading systems are a particularly popular and economical choice for interior and exterior shading and decoration. Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving. They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.

8 Roller blind systems Model 320A Roller blind with plastic mechanism 320A Description of parts Roller blind mechanism 320A White plastic roller blind mechanism with slots for installation on its brackets, with internal metal spring. Roller tube Roller blind tube 32mm. Bottom rail Roller blind bottom rail 22mm round aluminium. Bottom rail end cups Plastic roller blind end cups, in white or grey. Chain White plastic, operating chain ball or Metal chain ball Brackets White metal wall or ceiling brackets. Technical Description 320A System Dimensions White plastic roller blind mechanism (5.5x5.5 cm) with chain, click type 320Α. It has an integrated metal clutch spring mechanism to lock the position and prevent unwanted roll down of the roller without the use of the chain. The brackets are white metal, with the option to install on walls or ceilings. White or grey plastic bottom rail end cups are supplied for decorative purposes. White plastic chain ball, or optionally metal chain ball, mainly for use of large sized systems (height greater than 2 meters), as well as a choice between an endless chain or with a clip. If an endless chain is chosen, there is the option to use a chain counterweight. Manufacturable Dimensions Maximum width Maximum height Comments 2 m 3 m The maximum manufacturable roller depends on the fabric selected Expansion brackets The aluminium roller blind tube has a diameter of 32 mm with a special groove for insertion of the dowel rod to hold the fabric in place. The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod. 53mm 31mm 15mm 65mm 31mm 65mm 15mm 53mm 14mm 21mm 51mm 31mm 15mm 74mm 31mm 15mm 1 51mm 74mm 14mm 21mm