How to connect Intuos Creative Stylus to supported apps

Transcription

1 How to connect Intuos Creative Stylus to supported apps Version 6 26 th September 2013 by Jens Krueger Important: Before you start, enable Bluetooth functionality on your ipad. Intuos Creative Stylus will not appear in the list of Bluetooth devices on your ipad Instead, Intuos Creative Stylus connects to each app individually Find your app below and follow these steps to connect your ipad with the Intuos Creative Stylus Also, to improve palm rejection turn off Multitasking Gestures in ios Settings > General > Multitasking Gestures Supported apps: Adobe Ideas added 9/26/2013 Autodesk Ink Autodesk Sketchbook Autodesk Sketchbook Pro ArtRage ArtStudio added 9/26/2013 Bamboo Paper ibispaint X Inkist Procreate Zen Brush Express

2 Adobe Ideas 1. Open image 2. Tap on Stylus tool in top menu 3. Switch on Pressure Sensitive Stylus 4. Press side switch on Intuos Creative Stylus to start pairing LED starts blinking in blue 5. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app 6. Wacom Intuos Creative Stylus appears in the menu 7. Note: Palm rejection can be enabled here too.

3 Autodesk Sketchbook Pro/Sketchbook Express 2. Open image in edit mode 3. Tap on i symbol in top menu 4. Tap on Preferences 5. Select Wacom Intuos Creative Stylus in drop down menu from 3 rd Party Pen Connection 6. Press side switch on Intuos Creative Stylus to start pairing LED starts blinking in blue 7. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app

4 Autodesk Ink 2. Open image 3. Tap on i symbol in bottom menu 4. Tap on 3 rd Party Pen Connection 5. Tap on Wacom Intuos Creative Stylus in list. 6. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app

5 ArtRage 1. Open ios settings 2. Tap on ArtRage in left settings list 3. Select Wacom Intuos Creative in drop down menu from Use Stylus Type 4. Press side switch on Intuos Creative Stylus to start pairing LED starts blinking in blue 5. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app

6 ArtStudio 1. Tap on ArtStudio in top menu 2. Tap on Settings 3. Scroll down until STYLUSES appear 4. Tap on Support stylus and select Wacom 5. Press side switch on Intuos Creative Stylus to start pairing LED starts blinking in blue 6. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app 7. Note: Button settings can be changed here

7 Bamboo Paper 2. Tap on on i symbol in bottom menu 3. Tap on Creative Stylus 4. Follow instructions

8 ibispaint X 2. Open image in edit mode 3. Tap on left tool in bottom menu 4. Tap on Configuration symbol 5. Tap on Wacom Intuos Creative Stylus in Digital Stylus list 6. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app. The app confirms with Connected : Wacom Intuos Creative Stylus. 7. Note: Here several stylus settings can be changed (buttons, palm rejection, thickness and opacity)

9 Inkist 2. Tap on Stylus Settings symbol in left menu 3. Switch on Wacom Intuos in Manufacturer Settings 4. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app. The app confirms with a red dot below the Stylus Settings symbol in left menu 5. Note: Here several stylus settings can be changed. (buttons, palm rejection, touch delay)

10 Procreate 2. Open image 3. Tap on tool symbol in top menu 4. Tap on Devices 5. Select Wacom Intuos Creative Stylus in list 6. Press side switch on Intuos Creative Stylus to start pairing LED starts blinking in blue 7. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app. A small message box confirms Connected. 8. Note: Here button settings can be changed and the battery level can be checked.

11 Zen Brush 2. Tap on send symbol in menu 3. Tap on External Accessories in list 4. Tap on Wacom Stylus Settings in list. 5. Enable Use Wacom Stylus 6. Once the LED stays blue for two seconds the Intuos Creative Stylus is correctly paired with the app. Wacom Intuos Creative Stylus appears in the field Stylus Name. Buttons settings can be changed and palm rejection can be enabled. - End of document -