STANDARD TECHNICAL DETAILS
|
|
|
- Neal Sullivan
- 7 years ago
- Views:
Transcription
1 STANDARD TECHNICAL DETAILS
2 CONTENTS PAGE QL-TD-01 Quinn Lite Foundation Blocks (solid floor) 1 QL-TD-02 Quinn Lite Foundation Blocks (suspended floor) 2 QL-TD-03 Quinn Lite Foundation Blocks (stone cladding built off) 3 QL-TD-04 Cavity Wall Cill Detail 4 QL-TD-05 Cavity Wall Window Reveal Detail 5 QL-TD-06 Cavity Wall Lintel Detail (steel) 6 QL-TD-07 Cavity Wall Lintel Detail (concrete) 7 QL-TD-08 Hollowcore Slabs 8 QL-TD-09 Joist Hangers 9 QL-TD-010 Cavity Wall Eaves Detail 10 QL-TD-011 Flat Roof Abutment 11 QL-TD-012 Mono-Pitch Roof Abutment 12 QL-TD-013 Solid Wall Cill Detail 13 QL-TD-014 Solid Wall Window Reveal Detail 14 QL-TD-015 Solid Wall Lintel Detail (concrete) 15 QL-TD-016 Solid Wall Lintel Detail (Steel) 16 QL-TD-017 Solid Wall Eaves Detail 17 QL-TD-018 Movement Joints at Intersecting Walls (butt-jointed) 18 QL-TD-019 Movement Joints at Intersecting Walls (built-in) 19 QL-TD-020 Bed Joint Reinforcement 20 QL-TD-021 Movement Joint in Wall Panels 21 QL-TD-022 Party Wall Construction 22 QL-TD-023 Party Wall Construction with Flexible Cavity Closer 23 QL-TD-024 Quinn Lite Coursing Units 24 QL-TD-025 Concrete Padstones 25 QL-TD-026 Dry Plastering System 26 QL-TD Cavity Wall Achieving U-Value 0.20W/m2K 27 QL-TD Cavity Wall Achieving U-Value 0.20W/m2K 28 QL-TD Cavity Wall Achieving U-Value 0.20W/m2K 29 QL-TD Cavity Wall Achieving U-Value 0.24W/m2K 30 QL-TD Cavity Wall Achieving U-Value 0.18W/m2K 31 QL-TD Solid Wall Achieving U-Value 0.24W/m2K 32 QL-TD Solid Wall Achieving U-Value 0.20W/m2K 33
3 1. 300mm wide Quinn Lite foundation block B5 or B7 (B3 subject to site investigation) 2. Hardcore 3. Sand blinding 4. Radon barrier 5. Quinn Therm floor insulation 6. Concrete Slab mm Quinn Lite B5 block work 8. Approved external render 9. Damp proof course 10. Flexible wall tie, butterfly or double triangle - BS1234 (1978) or EN Quinn Lite Foundation Block (Showing solid floor) QL-TD
4 1. 300mm widequinn Lite foundation block B5 or B7 (B3 subject to site investigation) 2. Hardcore 3. Sand blinding 4. Radon barrier 5. Quinn Prestressed Floor Slab 6. Quinn Therm floor insulation 7. Damp Proof Membrane 8. Screed 9. Approved external render 10. Damp proof course 11. Flexible wall tie, butterfly or double triangle - BS or EN mm B5 blockwork Quinn Lite Foundation Block (showing precast suspended floor) QL-TD
5 1. 440mm wide Quinn Lite foundation block B5 or B7 (B3 subject to site investigation) 2. Hardcore 3. Sand blinding 4. Radon barrier 5. Quinn Therm floor insulation 6. Concrete Slab 7. Stone Cladding 8. Damp proof course 9. Flexible wall tie, butterfly or double triangle - BS or EN Quinn Lite Foundation Block (Showing Stone Cladding Built off) QL-TD
6 1. DPC mm x 140mm back concrete cill 3. 20mm approved external render mm Quinn Lite B5 blockwork 5. 40mm residual cavity 6. Flexible wall tie, butterfly or double triangle - BS or EN mm Quinn Therm QW insulation 8. 25mm Quinn Therm QW insulation 9. Timber cill board 10. Quinn Lite block cut to size mm Quinn Lite B5 blockwork mm plasterboard on dabs or battens Cill Detail QL-TD-004 4
7 1. 100mm Dense concrete blockwork 2. Flexible wall tie, butterfly or double triangle - BS or EN mm external render 4. DPC 5. Window Frame mm plasterboard on dabs or battens 7. 25mm Quinn Therm QW insulation 8. 60mm Quinn Therm QW insulation mm Quinn Lite B5 blockwork THERMAL BRIDGING NOTE Quinn Lite Thermal blocks reduces thermal bridging at window reveals thus omitting the need for proprietary cavity closers. Window Reveal Detail QL-TD-005 5
8 1. 103mm brickwork 2. 60mm Quinn Therm QW insulation mm Quinn Lite B5 blockwork 4. Damproof course dressed down over steel lintel 5. Proprietary steel lintel 6. Plaster to Quinn lite specification 7. Window frame Lintel Detail (steel) QL-TD-006 6
9 1. 100mm Quinn Lite B5 blockwork 2. 60mm Therm QW insulation 3. Expanded metal placed across joint 4. Concrete lintel 5. Quinn Therm insulation mm Quinn Lite B5 blockwork 7. Expanded metal cross joint 8. Damp proof course dressed down over steel lintel 9. Concrete lintel 10. Window Frame Lintel Detail (concrete) QL-TD-007 7
10 1. 150mm deep hollow core concrete floor slab with 150mm bearing 2. Quinn Lite B5 block work 3. Sand/cement screed 4. Quinn Lite Block cut to size 150mm Quinn Lite B5 is recommended to support floor slabs in domestic dwellings. For buildings other than dwellings contact our technical department. Hollow Core Units QL-TD
11 1. 100mm Quinn Lite Aircrete blockwork 2. Joist Hanger to B.S Floor Joist 4. Recess to accommodate joist hanger NOTE When using Quinn Lite Thin Joint Aircrete blockwork, the joist hanger should be placed on top of the block work surface as indicated below and the next course of blockwork should be recessed to accommodate the hanger Quinn lite Blocks and Joist Hangers QL-TD-009 9
12 1. Mineral Wool Insulation 2. Rafter 3. Eaves ventilation 4. Battens at max 320mm gauge x334mm Quinn Rooftile 6. Underfelt (carried into gutter) 7. Angle Fillet 8. Gutter 9. Fascia board 10. Soffit with ventilation holes 11. Approved External Render mm Quinn Lite B5 block work mm cavity 14. Timber wallplate 15. Quinn Lite coursing unit 16. Cavity closer mm Quinn Therm (QW) insulation mm Quinn Lite B5 blockwork mm plasterboard on dabs Standard Eaves Detail QL-TD
13 1. 103mm brickwork 2. Stepped DPC 3. 60mm Quinn Therm (QW) insulation mm Quinn Lite (B5) Blockwork 5. Cover Flashing 6.Timber Wall Plate 7. Lead Apron Flashing 8. Timber Batten 9. Quinn Rooftile 10. Underfelt (carried up wall min 100mm) 11. Timber rafter Mono-pitch roof abutment QL-TD
14 1. 103mm brickwork 2. Stepped DPC 3. 60mm Quinn Therm (QW) insulation 4. Quinn Lite (B5) Blockwork 5. Flashing dressed down over roof covering mm plasterboard on dabs or battens 7. Angle Fillet 8. Timber ferring pieces 9. Proprietary concrete lintels 10. Joist Hanger 11. Flat roof covering 12. Timber Sheeting 13. Timber Rafter Flat-roof abutment QL-TD
15 1. DPC 2. Concrete Cill 3. 20mm Approved External Render mm Quinn Lite B5 blockwork 5. 10mm mortar joint 6. Void formed by timber batten 7. Timber cill board 8. 25mm Quinn Therm insulation 9. 80/12.5 Quinn Laminate QL Board 10. Vapour control layer Cill Detail (Solid Wall Construction) QL-TD
16 1. 215mm Quinn Lite B5 blockwork 2. Approved External Render 3. Mastic seal 4. Mastic seal 5. 25/12.5 Quinn Laminate QL board 6. Timber batten 7. Vapour control layer 8. 80/12.5 Quinn Laminate QL board Window Reveal Detail (Solid Wall Construction) QL-TD
17 1. 215mm Quinn Lite B5 blockwork 2. Quinn Lite coursing unit 3. Approved External Render 4. Concrete lintel 5. Mastic seal 6. Vapour control layer 7. 80/12.5 Quinn Laminate QL board 8. Timber batten 9. 25/12.5 Quinn Laminate QL board 10. Mastic Seal Concrete Lintel Detail (Solid Wall Construction) QL-TD
18 1. 215mm Quinn Lite B5 blockwork 2. Quinn Lite coursing unit 3. Approved External Render 4. Thermally broken proprietary steel lintel 5. Mastic seal 6. Vapour control layer 7. 80/12.5 Quinn Laminate QL board 8. Timbar batten 9. 25/12.5 Quinn Laminate QL board 10. Mastic seal Steel Lintel Detail QL-TD
19 1. Mineral Wool Insulation 2. Rafter 3. Eaves Ventilation 4. Battens at max 320mm gauge x334mm Quinn Rooftile 6. Underfelt (carried into gutter) 7. Angle Fillet 8. Gutter 9. Fascia board 10. Soffit with ventilation holes 11. Approved External Render mm Quinn Lite B5 Blockwork 13. Timber batten 14. Quinn Lite Coursing Unit 15. Timber Wallplate 16. Vapour control layer /12.5 Quinn laminate QL board Standard Eaves Detail (Solid Wall Construction) QL-TD
20 1. 100mm Quinn Lite/Dense concrete blockwork mmx25mmx3mm Ancon PPS wall tie with de-bonding sleeve mm Quinn Lite/Dense concrete blockwork 4. 60mm Quinn Therm cavity wall insulation 5. Dense concrete blockwork or brickwork 6. Flexible wall tie, butterfly or double triangle - BS or EN Quinn Lite Movement Joint at Flanking Intersecting Wall QL-TD
21 1. 300mmx25mmx3mm Ancon PPS wall tie with de-bonding sleeve ends mm Quinn Lite blockwork 3. Quinn Therm cavity wall insulation mm Dense concrete blockwork or brickwork 5. Flexible wall tie, butterfly or double triangle - BS or EN Quinn Lite Movement Joint at built in Flanking Intersecting Wall QL-TD
22 1. Bed joint reinforcement 2. Expanded metal lathing 3. Concrete lintel 4. Quinn lite bolckwork NOTE Bed joint reinforcement should be placed in 2 no. courses above and below openings and should extend min 600mm beyond opening. Bed joint reinforcement to be Austenitic Stainless steel. NOTE Expanded metal lathing to be placed across junction between concrete lintel and Quinn Lite blocks prior to plastering. This prevents cracking caused by differential movement. Bed Joint Reinforcement QL-TD
23 1. Movement joint 2. Quinn Lite blockwork NOTE It is not normally necessary to include movement joints in the internal walls and the inner leaf of the external walls of dwellings unless the walls are longer than about three times their height. In the external leaf of dwellings and in the walls of industrial and commercial buildings, movement joints should be inserted in accordance with BS 5628 and IS 325. Generally, a movement joint should be inserted every 5 to 6 metres. Movement Joints QL-TD
24 OPTION mm proprietary sound reduction board mm plaster 3. Quinn Lite B5 blockwork OPTION mm Plaster 2. Quinn Lite B5 or B7 blockwork 3. 75mm Cavity 4. Flexible wall tie, butterfly or double triangle - BS1234: 1978 or EN mm Quinn Lite B5 blockwork OPTION 1 AIRBORNE SOUND REDUCTION AVERAGE PERFORMANCE = 60 db DnT,w NOTE Please contact the technical department for further details on Party Wall Construction. Typical Party Wall Construction QL-TD
25 1. Quinn Lite 5N blockwork 2. 75mm wide cavity 3. 13mm plaster 4. Flexible cavity closer 5. DPC 6. Flexible wall tie, butterfly of double triangle - BS1234: 1978 or EN Party Wall Construction with flexiable Cavity Closer QL-TD
26 1. Coursing units 2. Concrete lintel NOTE Quinn Lite coursing units of the same strength as Quinn Lite blocks can be used to reach correct coursing levels around window and door openings, around steel beams or timber joists etc. Quinn Lite Coursing Units QL-TD
27 1. Steel beam 2. Concrete Padstone 3. Quinn Lite B5 blockwork 4. Bed joint reinforcement NOTE Where bearing stress under steel beams or lintels is in excess of permissible limits a concrete padstone or concrete spreader should be used. Cold bridging should be avoided by using additional insulation at padstone. Lintels should always bear onto full blocks and not onto coursing units or off cuts of blocks. Both steel and concrete lintels are suitable for Aircrete blockwork and should comply with BS 5977 Lintels Part Lintels should have min 100mm bearing where opening is 1.2m or less and min 150mm bearing where opening is greater than 1.2m. Reinforcements Joints below Concrete Padstones QL-TD
28 1. Plasterboard sheets. 2. Suitably approved mechanical fixings at mid height. 3. Continuous drywall adhesive perimeter seal. 4. Drywall adhesive dabs on Quinn Lite blockwork Dry Plastering System QL-TD
29 1. 20mm approved external render mm Quinn Lite B5 blockwork 3. 40mm cavity 4. 60mm Quinn Therm QW insulation 5. Flexible wall tie, butterfly or double triangle - BS or EN mm Quinn Lite B5 blockwork 7. 13mm lightweight plaster 8. Thin Joint Mortar copyright The information is supplied in good faith and no liability can Wall Construction using Quinn lite 150mm B5 to give a U-value of 0.20W/m 2 k QL-TD
30 1. 20mm approved external render mm dense concrete blockwork 3. 40mm cavity 4. 60mm Quinn Therm QW insulation 5. Flexible wall tie, butterfly or double triangle - BS or EN Thin Joint Mortar mm Quinn Lite B5 blockwork 8. 13mm lightweight plaster 215 Quinn Lite B5 Inner leaf cavity wall to give a U-value of 0.20W/m 2 k QL-TD
31 1. Staifix-Thor Helical TJ2 wall tie (Alternatives are available- please contact technical department) mm brickwork 3. 40mm cavity 4. 60mm Quinn Therm QW insulation mm Quinn Lite B3 blockwork 6. Thin Joint Mortar 7. 13mm Internal Plaster Wall Construction using Quinn Lite 150mm B3 with thin Joints to give U-Value of 0.20W/m 2 K QL-TD
32 1. 103mm brickwork 2. 40mm cavity 3. 60mm Quinn Therm QW insulation 4. Flexible wall tie, butterfly or double triangle - BS or EN mm mortar joint mm Quinn Lite B5 Blockwork 7. 13mm Plaster Wall Construction using Quinn Lite 100mm B5 with facing brick giving U-value of 0.24Wm 2 K QL-TD
33 1. 20mm approved external render mm Dense concrete blockwork 3. 40mm cavity 4. 60mm Quinn Therm QW insulation mm Quinn Lite B5 blockwork 6. Quinn QL 25/12.5 laminate board (insulation / plasterboard) mm Carlite finish 8. Flexible wall tie, butterfly or double triangle - BS or EN Wall Construction using Quinn lite block 150mm B5 to give a U-Value of 0.18Wm 2 k QL-TD
34 1. 20mm external render mm Quinn Lite B5 blockwork 3. 50mm Quinn Therm QW insulation mm plasterboard with 3mm skim finish 300mm B5 Solid Wall Construction to give a U-Value of 0.24Wm 2 K QL-TD
35 1. Approved external render mm Quinn Lite B5 blockwork 3. Quinn QL 80/12.5 laminate board (insulation / plasterboard) 4. 13mm lightweight plaster (carlite finish) 215mm B5 Solid Wall Construction to give a U-Value of 0.20Wm 2 K QL-TD
36 For Further information: QUINN-lite Derrylin Co. Fermanagh BT92 9AU Tel: +44 (0) Fax: +44 (0) Web: AERATED THERMAL BLOCKS CEMENT CONCRETE ROOFTILES QUINN THERM (PIR) CERTIFICATE No. 07/0264 Quinn-Lite Aircrete Blocks: B3, B5 & B7 QUINN LITE PAC PRESTRESSED QUARRY TARMAC ENERGY FINANCIAL SERVICES GLASS HOTELS PACKAGING PLASTICS PROPERTY RADIATORS QUINN GROUP Derrylin, County Fermanagh, Northern Ireland, BT92 9AU. t: +44 (0) f: +44 (0) e: w: While every care has been taken to ensure the accuracy of the information in this brochure, Quinn Group can accept no responsibility for any errors which may occur.
Contents. APA Construction Details. Full fill cavity walls 2-13. Partial fill cavity walls 14-25. Solid externally insulated walls 26-37
Contents Pages Full fill cavity walls 2-13 Partial fill cavity walls 14-25 Solid externally insulated walls 26-37 Appendix (BRE confirmation of Ψ and y-values) 38-40 Page 1 of 40 APA Construction Details
Multi-layer Insulation Blanket for Roofs
Multilayer Insulation Blanket for Roofs Thermal Insulation in a 40mm thin, flexible, multilayer membrane Meets requirements of L1A, L1B 2010 In accordance with BR443 NHBC Acceptance Pitched & Flat roof
Module 3.7. Thermal bridging
Module 3.7 Thermal bridging Learning Outcomes On successful completion of this module learners will be able to - Describe construction details which influence thermal bridging. 2 Introduction to thermal
STEP-BY-STEP. construction guide. Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet.
STEP-BY-STEP construction guide Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet. Welcome to our CONSERVATORY AND SUNROOM CONSTRUCTION GUIDE What is the specification
NRG 75 CRF NRG GREENBOARD WALL SYSTEM
NRG GREENBOARD WALL SYSTEM NRG Energy Efficient Building Systems is pleased to announce a revolution in lightweight cladding systems. NRG Building Systems is the first and only company to achieve CodeMark
Building Regulations for the Conservation of Fuel and Power
Insulation CI/SfB Rn7 M2 First Issue April 2014 Building Regulations for the Conservation of Fuel and Power ENGLAND EXISTING DWELLINGS 2013 EDITION Low Energy Low Carbon Buildings Contents Page Introduction
Extension. for. Pretend Customer 123 A Road HA7 9BP. at: 123 A Road HA7 9BP
for Pretend Customer at: Pretend Customer Site address: Monday, 23 November 2015 Dear Pretend Customer, Subject: Thank you for your valued enquiry and instructions to quote for the above project. We are
SOUND INSULATION FOR EXTERIOR WALLS AND FACADE SYSTEMS
NOISE TECHNICAL FACT SHEET FACT SHEET 5 SOUND INSULATION FOR EXTERIOR WALLS AND FACADE SYSTEMS The sound insulation of exterior walls and roof-ceiling systems refers to their ability to reduce external
The Pocket Guide To Insulation August 2013
The Pocket Guide To Insulation August 2013 Introduction Knauf Insulation is the UK s leading manufacturer of insulation products, including: Earthwool glass and rock mineral wool Polyfoam ECO extruded
Rochdale Building Control Guide. Approved Document C. Site preparation and resistance to contaminants and moisture
Rochdale Building Control Guide Approved Document C Site preparation and resistance to contaminants and moisture Dampness is often misdiagnosed within buildings, the approved document deals with prevention
Rockwool Flexi Insulation Application Guide
Pitched roof Rafters InterMediate floors INTERNAL partitions external Framed walls separating floors Separating Walls Rockwool Flexi Insulation Application Guide Ground floor The perfect fit for any framed
Introduction & Principles Issued in support of Junction Details, Parts 1 to 5
Accredited Construction Details (Scotland) 2010 For the limitation of thermal bridging and air infiltration in low and medium rise domestic buildings Introduction & Principles Issued in support of Junction
Section 4.3. Separating Floors. Timber frame floor with I-Beams. Upgrading existing timber floor with new ceiling. Timber frame floor with
Section Separating Floors Timber frame floor with I-Beams Product: Earthwool Acoustic Roll and Floorfoam Easy Edge Strip Timber frame floor with solid timber joists Product: Earthwool Acoustic Roll and
!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES Crown copyright 2006 Cover designed and produced by Astron Text pages
Section 3.1.2. Timber Frame Walls. Single layer between studs. Single layer between studs with service void. Between studs with insulated lining
Section Timber Frame Walls Single layer between studs Product: Earthwool FrameTherm Rolls and Slabs Tf01 Single layer between studs with service void Product: Earthwool FrameTherm Rolls and Slabs Tf02
Section 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
Rev 1-12.2013. Code of Practice. SIP Technology. www.uksips.org
Rev 1-12.2013 Code of Practice SIP Technology www.uksips.org What are Structural Insulated Panels (SIPS)? SIPS are prefabricated, high performance, lightweight, building panels that can be used in floors,
Good Craftsmanship Guide. Carpentry and Joinery- Carcassing
Good Craftsmanship Guide Carpentry and Joinery- Carcassing Introduction This Good Craftsmanship Guide highlights key problems with the major elements of Carpentry and Joinery - Carcassing, and gives guidance
Energy Company Obligation (ECO): Technical Monitoring Questions
Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified
PRESTRESSED CONCRETE FLOORING BEAMS
PRESTRESSED CONCRETE FLOORING BEAMS TRIED & TRUSTED Introduction Established in 2001 TT Concrete Products Limited has become a prominent manufacturer of prestressed concrete flooring beams throughout the
The formation of roof waterproofing details calls for
3.5 BUILT-UP ROOFING DETAIL DESIGN INTRODUCTION The formation of roof details calls for a combination of the skills of the designer and the roofer. There are many different approaches to detail design
DIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP
DIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP CONTENTS WHAT IS RISING DAMP STEP 1 SURVEY STEP 2 METER READINGS STEP 3 CONCLUSION STEP 4 PREPARATION FOR TREATMENT STEP 5 TYPE OF TREATMENT STEP 6
CI/SfB 2- Rj7 December 2010
Engineered Timber Systems CI/SfB 2- Rj7 December 2010 STANDARD DETAILS Contents Wall Details W1 Typical wall section. W2 a Sectional elevation through soleplate fixing detail. Ground bearing slab. W2 b
rationel WINDOWS WITH VISION
Brick / Blockwork 340mm Cavity Wall Interface Detail Cill BW-001A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium
The Real Value of Space
Insulation First Issue May 2015 The Real Value of Space IN COMMERCIAL REAL ESTATE THE IMPACT OF DIFFERING INSULATION SPECIFICATIONS ON THE ROI ASSOCIATED WITH INTERNAL FLOOR AREA Find additional space
Timber Frame Walls Rethinking Construction
Insulation Fifth Issue November 2007 Timber Frame Walls Rethinking Construction INSULATION BEST PRACTICE FOR THE 21ST CENTURY Summary 9 mm OSB sheathing 3 mm skim coated 15 mm plasterboard Rock or glass
FIRE RATED GLAZING System Guide
SYSTEM GUIDE Issue date: 05-05-2015 Expiry date: 31-12-2016 System Guide Introduction Pyropanel Developments are specialists in fire rated glazing solutions, and our systems are designed for easy installation
Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in
REV 1-12.12.11/TB002 Technical Bulletin Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in conjunction with TRADA Technology and is intended to provide the reader with introductory
Building Control Guidance Note
Elements Renovation / Replacement. Issued 25/01/13 Rev a Page 1 of 9 (Applies to both Domestic and Non-Domestic Premises) Works relating to thermal elements can arise in building an extension, a material
The right solutions. However, it is inevitable that with the introduction of any new construction system the question arises How does it compare?
Value assessment. The right solutions. We Believe We believe that Porotherm offers both short and long term value to all involved in the building process - from bricklayer to client and everyone in between.
British Gypsum Guide to Timber Frame Construction. March 1998
British Gypsum Guide to Timber Frame Construction March 1998 Timber frame construction has a centuries long tradition in the UK, however, over the last 80 years it has continuously evolved to meet the
This seminar covers the principles, design and installation of ground bearing and suspended insulated floors. You will discover
Dow Construction Products Thermal Insulation of Floors This seminar covers the principles, design and installation of ground bearing and suspended insulated floors. You will discover Why a floor should
Improving the flood resistance of your home. Advice sheet 4: Flood-resilient walls.
Improving the flood resistance of your home Advice sheet 4: Flood-resilient walls. This sheet provides guidance on identifying different types of wall, and reducing the flow of floodwater through them
TGD L 2011. Limiting Thermal Bridging and Air Infiltration. Acceptable Construction Details. Introduction
TGD L 2011 Limiting Thermal Bridging and Air Infiltration Acceptable Construction Details Introduction Government of Ireland 2015 1 INTRODUCTION This guide to Acceptable Construction Details (ACDs) is
EAST LYME HIGH SCHOOL
Overview: 1971 N 1966 GYM 1966 CLASSROOM WING 1966 AUD. 1971 GYM 1998 1998 POOL EAST LYME HIGH SCHOOL Original 1966 Building: The original East Lyme High School was constructed in 1966 and was composed
0331 Brick and block construction
0331 BRICK AND BLOCK CONSTRUCTION This worksection has been written for Class 1 and 10a buildings that fully conform to the scope of AS 4773.1. If the works include isolated structures, (totally separate
BUILDING CONTROL GUIDANCE SHEET REPLACEMENT WINDOWS AND DOORS Last updated 16/11/2010
Building Control Charnwood Borough Council Southfield Road Loughborough LE11 2TN BUILDING CONTROL GUIDANCE SHEET REPLACEMENT WINDOWS AND DOORS Last updated 16/11/2010 Page 1 of 6 PURPOSE: This Guidance
Linea Weatherboard DIRECT FIX CONCRETE SLAB AND SOFFIT FIGURE 1
Top plate Stud Soffit lining 45mm min nog Fix scotia bead Building underlay/james Hardie rigid air barrier Soffit Detail Building underlay/james Hardie rigid air barrier Bottom plate 25mm wide cant strip.
House building is changing fast NHBC unveils new Standards Chapters on curtain walling and cladding, and light steel framed walls and floors
W42_Stand_Extra_32 15/3/05 9:17 am Page 2 NHBC s technical newsletter April 2005 Issue 32 This edition includes: 2 House building is changing fast NHBC unveils new Standards Chapters on curtain walling
Sports Buildings: budget costs for the Flood Relief Fund
Sports Buildings: budget costs for the Flood Relief Fund The list below provides typical costs for flood insurance works, typically required by sports clubs or facilities. The list is not exhaustive but
PB301 July 2009. Lightweight Building Solutions. Bushfire Protection. www.boral.com.au/bushfireprotection
PB301 July 2009 Lightweight Building Solutions Bushfire Protection www.boral.com.au/bushfireprotection Attached or adjacent within 6m roofed structures such as garages, carports, verandas and the like,
Guide to working on Public Sewers
Guide to working on Public Sewers affected by Building Works Introduction Severn Trent Water Ltd requires the work to be done in order to protect the public sewer and minimise the risk of us having to
If stepping is required, step at 180mm as seen in this picture.
Cast Foundations to standard building regulations requirements. Foundations must be cast completely level, 600mm wide by 230mm deep for single storey, double storey is not allowed by NHBRC. If stepping
GUIDANCE SHEET FOR CONSERVATORIES, SUNROOMS AND EXTENSIONS TO DWELLINGS.
GUIDANCE SHEET FOR CONSERVATORIES, SUNROOMS AND EXTENSIONS TO DWELLINGS. This leaflet provides guidance on how to attain compliance with The Building (Amendment) Regulations (Northern Ireland) 2006, Part
Internal wall insulation in existing housing
Energy Efficiency Best Practice in Housing Internal wall insulation in existing housing A guide for specifiers and contractors Cost-effective External wall appearance maintained Easier to install and maintain
Including. Rubershield-Pro. Breather Membrane
Including RubershieldPro Breather Membrane 2 Ruberoid produces a wide range of underslating membranes, primarily to be installed below tiles, slates or metal roofing providing a secondary barrier against
Basement Waterproofing in Existing Buildings
A S S O C I A T I O N Basement Waterproofing in Existing Buildings A guide to protecting your home Follow us on Twitter Find us on Facebook www.property-care.org A basic understanding of Basement Waterproofing
domestic structure SBSG 2007 ANNEX C
domestic structure SBSG 2007 ANNEX C Small buildings structural guidance 1.A General 1.B Stability 1.C Foundations 1.D Masonry walls 1.E Timber frame walls 1.F Timber floor and roof members contents domestic
Improving the flood resistance of your home. Advice sheet 6: Flood-resilient floors
Improving the flood resistance of your home Advice sheet 6: Flood-resilient This sheet provides guidance on identifying different types of floor, assessing the routes floodwater may enter, and describes
Domestic Extensions. Monmouthshire County Council. Building control guidance document
Monmouthshire County Council Building control guidance document Domestic Extensions Building Regulations 2010 (with 2013 amendments) For use in Wales May 2013 Edition Guidance produced for Monmouthshire
How To Certify The Scottsdale Construction System
BRE CERTIFICATION LIMITED PRODUCT SCOTTSDALE CONSTRUCTION SYSTEM CERTIFICATE NUMBER 129/07 DATE OF ISSUE December 2007 SUPPLIED BY Scottsdale Construction System Ltd SUMMARY The Scottsdale Construction
CI/SfB (31.9) BETTER BY DESIGN PRODUCT GUIDE COMPLETE GUIDE TO THE IG PRODUCT RANGE. www.iglintels.com
CI/SfB (31.9) Hh2 BETTER BY DESIGN PRODUCT GUIDE COMPLETE GUIDE TO THE IG PRODUCT RANGE www.iglintels.com BETTER BY DESIGN IG produce the UK s largest range of steel lintels backed by industry leading
Lintel Product Selector
Uniclass L325:P4142 Cl/Sfb October 2014 EPIC F631:X442 (31.9) Hh2 www.catnic.com Lintel Product Selector October 2014 Care has been taken to ensure that the contents of this publication are accurate, but
Multi-Foil reflective insulation SPACE SAVING U-VALUE AS LOW AS 0.16W/m 2 K LIGHTWEIGHT EASY TO FIX
Multi-Foil reflective insulation SPACE SAVING U-VALUE AS LOW AS 0.16W/m 2 K LIGHTWEIGHT EASY TO FIX TECHNICAL CHARACTERISTICS Multi-Foil Reflective Insulation Xfoil Range of insulation is designed to achieve
CARPENTRY - HOUSING. This is the sloping length of a right-angled triangle.
CARPENTRY - HOUSING PART 2: GABLE ROOFS The gable roof is classified as being double-pitched and one of the simplest roof forms, due to the fact that all rafters in the roof are exactly the same length
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES 2 ND EDITION
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES 2 ND EDITION CONTENTS Page 1 STATUS OF THIS DOCUMENT 3 2 WHEN YOU CAN USE THIS DOCUMENT 4 3 INTRODUCTION 5 4 SUBSOIL CONDITIONS 6 5 FOUNDATIONS
STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
ONLINE VERSION. The Building Regulations 2010 The Building (Approved Inspectors etc) Regulations 2010 ONLINE VERSION
The Building Regulations 2010 The Building (Approved Inspectors etc) Regulations 2010 E1 E2 E3 E4 E Protection against sound from other parts of the building and adjoining buildings Protection against
Innovation - High performance roof, wall and floor insulation board. delivering better performance
2010 VERSION 1 IRL High performance roof, wall and floor insulation board Innovation - delivering better performance PRODUCT SPECIFICATION INSTALLATION GUIDE I ve worked with Xtratherm for years, they
How to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
Clay Roof Tile Council. Vertical Tiling
Clay Roof Tile Council Vertical Tiling Prepared by : The Technical Committee of the Clay Roof Tile Council, 2004 ii CLAY ROOF TILE COUNCIL - VERTICAL TILING Acknowledgements This document has been prepared
Providing protection in construction
Providing protection in construction VOLUME 2: WALLS AND FLOORS Contact Information UK office address: DuPont Tyvek Hither Green Trading Estate Clevedon, North Somerset BS21 6XU Tel: 01275 879770 Fax (sales):
Building Control Guidance Note
Issued 01/01/13 Rev Page 1 of 5 If you intend to convert an existing loft space into additional rooms you will need to apply for Building Regulation Approval. You may also need Planning Permission if you
Melbourne balcony Assessments
Balcony Assessment Melbourne balcony Assessments Address: SAMPLE Date: Assessor: Luke O Neill Registered Builder DBL-C 31305 Assessment Guidelines This is an assessment of balcony and elements as presented
Composite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
Monocouche Best Practice Guide. New-Build Housing Managing movement to avoid cracking
Monocouche Best Practice Guide New-Build Housing Managing movement to avoid cracking Avoiding Cracking For The Designer Visible cracks in render are unsightly and although not hazardous to the construction
Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
DESIGNERS GUIDE TO DOMESTIC CONSERVATORIES
WBCA 403 DESIGNERS GUIDE TO DOMESTIC CONSERVATORIES A guide to assist those intending to install or who are involved in installing conservatories. Includes information about: conservatory and component
Section 2.4. Built-up Metal Roofs. Rail and bracket system. Standing seam system. Bu02. Product: Earthwool FactoryClad range Bu01
Section Built-up Metal Roofs Rail and bracket system Product: Earthwool FactoryClad range Bu01 Standing seam system Product: Earthwool FactoryClad range and Earthwool Universal Slab Bu02 Built-up Metal
Residential Refurbishment. September 2012. ThermoShell Internal Wall Insulation System Design Guide
Residential Refurbishment September 2012 ThermoShell Internal Wall Insulation System Design Guide The importance of wall insulation in houses Buildings account for 40% of our energy consumption and in
Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5
Cl Sfb (27-9) Rn7 M2 December 2004 Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Fesco, Fesco S, Retrofit, Retrofit S, Fesco Fillet, PF,
ENVIRONMENTAL INFORMATION APR 1200 products are made from glass mineral wool, one of the most environmentally friendly insulants available.
APR 1200 Acoustic Partition Roll CI/Sfb Ref: APR002 Glass mineral wool roll designed to provide high levels of sound insulation in walls and floors to meet Part E (England & Wales) and Section 5 (Scotland)
IRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN. 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION
IRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION Bill Robinson BSc. C. Eng. M. I. Struct. E. Timber Design Services 1 IS440 Timber frame
Construction details. Technical specifications
Construction details Technical specifications Construction details CONTENTS Introduction 3 Typical building 7 Thermal performance of built-up systems 8 Built-up roof constructions 14 Built-up wall constructions
Understanding BS EN 771-3: Aggregate concrete masonry units
60 Charles Street, Leicester LE1 1FB Tel: 0116 253 6161 Fax: 0116 251 4568 Email: enquiries@cba-blocks.org.uk Website: www.cba-blocks.org.uk February 2006 Understanding BS EN 771-3: Aggregate concrete
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
Memtec Single Ply PVC Membrane Roofing and Waterproofing Technology. Modern Efficient Performance Cost Effective Flat Roofing Systems
Memtec Single Ply PVC Membrane Roofing and Waterproofing Technology Modern Efficient Performance Cost Effective Flat Roofing Systems Introduction A complete range of Memtec Roofing and Waterproofing Single
Case Studies of Successful Code for Sustainable Homes Projects
Case Studies of Successful Code for Sustainable Homes Projects Sustainable Homes publish the Sustainable Homes Index For Tomorrow (SHIFT) and are a leading trainers of Code for Sustainable Homes assessors.
How To Build A Gambrel Roof And A Gable End Roof
Dutch Gable or Gambrel Roof and The Scotch Valley The folowing pages are an extract from Carp 12 text TAFE NSW Construction and Transport Division 71 HIP and VALLEY ROOFING GAMBREL / DUTCH GABLE The effect
Leaky Homes Financial Assistance Package (FAP) Repair plan example
LEAKY HOMES FINANCIAL ASSISTANCE PACKAGE FACT SHEET Repair Plan Example - June 2014 Page 1 Leaky Homes Financial Assistance Package (FAP) Repair plan example Introduction This repair plan example is intended
Partitioning & Ceiling Product Information
Partitioning & Ceiling Product Information tel + 44 (0) 1384 412448 fax + 44 (0) 1384 4494 email enquiries@drywallsteelsections.co.uk web www.drywallsteelsections.co.uk tel + 44 (0) 1384 412448 fax + 44
Ubiflex. Non-lead flashing system
Ubiflex Non-lead flashing system Ubiflex non-lead flashing Ubiflex is a non-lead waterproof flashing material which can be used in most applications where lead is traditionally used to provide a weatherproof
Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Eighth Issue March 2011 TR27 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD
Conventions for U-value calculations
Conventions for U-value calculations 2006 edition Brian Anderson BRE Scotland BRE is committed to providing impartial and authoritative information on all aspects of the built environment for clients,
The Kingspan Insulation Price List 1 st January 2013
Insulation The Kingspan Insulation Price List 1 st January 2013 FOR BUILDING FABRIC INSULATION, CAVITY CLOSERS AND MEMBRANES Visit our website: www.kingspaninsulation.co.uk Low Energy - Low Carbon Buildings
Poro Lintel System Range Unique to the Porotherm & thin joint masonary systems
Poro Lintel System Range Unique to the Porotherm & thin joint masonary systems keystonelintels.com Finding better ways to build for tomorrow The Keystone Group are Europe s leading steel lintel manufacturer.
Under Tile and Slate Undersheeting System
CI Sf (4-) Nn2 Under Tile and Slate Undersheeting System One system providing a weatherproof barrier, ventilation and insulation A RITISH OARD OF AGREMENT CERTIFICATE NO. 94 / 3055 2 Under Roofing System
Cavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
Installation Details. D1 General D2 Walls D3 Ceilings D4 Reference. D Installation Details
D Installation Details D1 General D2 Walls D3 Ceilings D4 Reference D Installation Details D Contents D1 General Installation and Fastening Sequence for Steel Studs D1.1 Fastener Selection D1.3 D2 Walls
BUILDING CONTROL GUIDANCE SHEET USE OF BREATHABLE ROOFING FELTS.
Building Control Charnwood Borough Council Southfield Road Loughborough LE11 2TN BUILDING CONTROL GUIDANCE SHEET USE OF BREATHABLE ROOFING FELTS. Last updated 16/11/2010 Page 1 of 6 PURPOSE: This Guidance
Part 7 Roofs. Chapter 7.2. Pitched roofs. Effective from 1 January 2012
Part 7 Roofs Chapter Effective from 1 January 2012 CONTENTS SCOPE DESIGN Clause Page Design standards D1 1 Statutory requirements D2 1 Loadbearing structure D3-D4 1 Trussed rafter roofs D5 1 Traditional
VM ZINC : standing seam Guidelines for specification and installation
VM ZINC : standing seam Guidelines for specification and installation Junglim Architecture - QUARTZ-ZINC Roofing and cladding system in VM ZINC Roofs from a 3 pitch and facades Freedom with shape and appearance
Residential Foundations and Basements
Residential Foundations and Basements Disclaimer All of the following information is based on the 2006 International Residential Code with Kentucky Amendments. As some information is paraphrased, article
GYPROCK PARTY WALL INTERTENANCY WALL SYSTEMS FOR CLASS 1 BUILDINGS
GYPROCK PARTY WALL INTERTENANCY WALL SYSTEMS FOR CLASS 1 BUILDINGS CONTENTS Introduction 2 Applications 3 Advantages 3 Components 3 6 Design Considerations 7 8 System Features 10 Typical installation Sequence
CERTIFICATE OF APPROVAL No CF 5055 ARABIAN VERMICULITE INDUSTRIES
CERTIFICATE OF APPROVAL No CF 5055 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 1 st Industrial Area,
TR21. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Fourth Issue March 2011 TR21 INSULATION FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT UP FELT AND MASTIC ASPHALT High performance rigid thermoset insulation
Foundations and Substructures
Ground workers handbook Foundations and Substructures Introduction The Ground Workers Handbook gives guidance to site managers and site staff on any particular issues on your site for traditional forms
Cupa Natural Slate Roofing design and fixing guide
Cupa Natural Slate Roofing design and fixing guide Cupa Natural Slate synonymous with quality Currently the Spanish slate industry is the undisputed market leader in natural slate production, with 90%