rationel WINDOWS WITH VISION
|
|
|
- Marcus Johnston
- 8 years ago
- Views:
Transcription
1 Brick / Blockwork 340mm Cavity Wall Interface Detail Cill BW-001A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Pressing Screw Fixed To Packer With Silicone Seal By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork Cavity Closer By Contractor BW-001A INTERNET :
2 Brick / Blockwork 340mm Cavity Wall Interface Detail Head BW-001B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel *Additional 10mm Tolerance* - As Shown 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork BW-001B INTERNET :
3 Brick / Blockwork 340mm Cavity Wall Interface Detail Jamb BW-001C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork BW-001C INTERNET :
4 Cant Brick / Blockwork 340mm Cavity Wall Interface Detail Cill BW-002A 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork Cavity Closer By Contractor BW-002A INTERNET :
5 Cant Brick / Blockwork 340mm Cavity Wall Interface Detail Head BW-002B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel *Additional 10mm Tolerance* - As Shown 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork BW-002B INTERNET :
6 Cant Brick / Blockwork 340mm Cavity Wall Interface Detail Jamb BW-002C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork BW-002C INTERNET :
7 Brick / Timber Framing 285mm Cavity Wall Interface Detail Cill BW-004A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew By Installer 100mm x 50mm Internal Timber Framing External Brickwork Cavity Closer By Contractor BW-004A INTERNET :
8 Brick / Timber Framing 285mm Cavity Wall Interface Detail Head BW-004B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel *Additional 10mm Tolerance* - As Shown 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew By Installer 100mm Internal Timber Framing External Brickwork BW-004B INTERNET :
9 Brick / Timber Framing 285mm Cavity Wall Interface Detail Jamb BW-004C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew By Installer 100mm x 50mm Internal Timber Framing External Brickwork BW-004C INTERNET :
10 Brick / Steel R.H.S Framing 260mm Cavity Wall Interface Detail Cill BW-005A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Self Drilling Tek Screw By Installer 150mm x 100mm Steel R.H.S External Brickwork BW-005A INTERNET :
11 Brick / Steel R.H.S Framing 260mm Cavity Wall Interface Detail Head BW-005B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel *Additional 10mm Tolerance* - As Shown 3mm MS Galvanised Fixing Strap By Installer 5.5mm Self Drilling Tek Screw By Installer External Brickwork BW-005B INTERNET :
12 Brick / Steel R.H.S Framing 260mm Cavity Wall Interface Detail Jamb BW-005C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer 5.5mm Self Drilling Tek Screw By Installer 150mm x 100mm Steel R.H.S External Brickwork BW-005C INTERNET :
13 Brick / Steel Stud Framing 325mm Cavity Wall Interface Detail Cill BW-006A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Self Drilling Tek Screw By Installer 150mm x 75mm Internal Met Sec Framing External Brickwork Cavity Closer By Contractor BW-006A INTERNET :
14 Brick / Steel Stud Framing 325mm Cavity Wall Interface Detail Head BW-006B 5 x 50mm Woodscrews (Staggered) By Installer Steel Head Lintel *Additional 10mm Tolerance* - As Shown 3mm MS Galvanised Fixing Strap By Installer 5.5mm Self Drilling Tek Screw By Installer 150mm x 75mm Internal Met Sec Framing External Brickwork Cavity Closer By Contractor BW-006B INTERNET :
15 Brick / Steel Stud Framing 325mm Cavity Wall Interface Detail Jamb BW-006C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Self Drilling Tek Screw By Installer 150mm x 75mm Internal Met Sec Framing External Brickwork BW-006B INTERNET :
16 Render / Blockwork 340mm Cavity Wall Interface Detail Cill R-001A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork Cavity Closer By Contractor External Render Finish R-001A INTERNET :
17 Render / Blockwork 340mm Cavity Wall Interface Detail Head R-001B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer R-001B INTERNET :
18 Render / Blockwork 340mm Cavity Wall Interface Detail Jamb R-001C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer R-001C INTERNET :
19 Render / Blockwork 340mm Cavity Wall Interface Detail Cill R-002A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork Cavity Closer By Contractor External Render Finish R-002A INTERNET :
20 Render / Blockwork 340mm Cavity Wall Interface Detail Head R-002B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End R-002B INTERNET :
21 Render / Blockwork 340mm Cavity Wall Interface Detail Jamb R-002C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End R-002C INTERNET :
22 Render / Blockwork 250mm Cavity Wall Interface Detail Cill R-003A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 100mm Internal Blockwork External Render Finish 100mm External Blockwork External Render Stop End R-003A INTERNET :
23 Render / Blockwork 250mm Cavity Wall Interface Detail Head R-003B 5 x 50mm Woodscrews (Staggered) By Installer Cavity Closer By Contractor 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 100mm Internal Concrete External Render Finish 100mm External Concrete External Render Stop End R-003B INTERNET :
24 Render / Blockwork 250mm Cavity Wall Interface Detail Jamb R-003C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 100mm Internal Blockwork External Render Finish 100mm External Blockwork External Render Stop End R-003C INTERNET :
25 Render (Cant Brick) / Blockwork 340mm Cavity Wall Interface Detail Cill R-004A 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork Cavity Closer By Contractor External Render Finish Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor R-004A INTERNET :
26 Render (Cant Brick) / Blockwork 340mm Cavity Wall Interface Detail Head R-004B 5 x 50mm Woodscrews (Staggered) By Installer Insulated Steel Head Lintel 3mm MS Galvanised Fixing Strap By Installer 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End R-004B INTERNET :
27 Render (Cant Brick) / Blockwork 340mm Cavity Wall Interface Detail Jamb R-004C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer Cavity Closer By Contractor 5.5mm Woodscrew With Suitable Plug By Installer 140mm Internal Blockwork External Brickwork External Render Finish External Render Stop End R-004C INTERNET :
28 Insulated Render / Concrete 340mm Solid Wall Interface Detail Cill R-005A No.12 Wood Screw With Cover Cap And Plug By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 150mm Internal Concrete 5.5mm Woodscrew With Suitable Plug By Installer Insulated Render/Cladding System By Sub-Contractor R-005A INTERNET :
29 Insulated Render / Concrete 340mm Solid Wall Interface Detail Head R-005B No.12 Wood Screw With Cover Cap And Plug By Installer 150mm Internal Concrete 5.5mm Woodscrew With Suitable Plug By Installer Insulated Render/Cladding System By Sub-Contractor R-005B INTERNET :
30 Insulated Render / Concrete 340mm Solid Wall Interface Detail Jamb R-005C No.12 Wood Screw With Cover Cap And Plug By Installer 150mm Internal Concrete 5.5mm Woodscrew With Suitable Plug By Installer Insulated Render/Cladding System By Sub-Contractor R-005C INTERNET :
31 Hardwood Surround / Timber 150mm Timber Wall Interface Detail Cill TF-001A No.12 Wood Screw With Cover Cap By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor TF-001A INTERNET :
32 Hardwood Surround / Timber 150mm Timber Wall Interface Detail Head TF-001B No.12 Wood Screw With Cover Cap By Installer TF-001B INTERNET :
33 Hardwood Surround / Timber 150mm Timber Wall Interface Detail Jamb TF-001C No.12 Wood Screw With Cover Cap By Installer TF-001B INTERNET :
34 Timber Cladding / Timber Framing 150mm Timber Frame Interface Detail Cill TF-002A No.12 Wood Screw With Cover Cap By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 100mm x 50mm Internal Timber Framing Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor External Timber Cladding By Sub-Contractor TF-002A INTERNET :
35 Timber Cladding / Timber Framing 150mm Timber Frame Interface Detail Head TF-002B No.12 Wood Screw With Cover Cap By Installer Insulated Steel Head Lintel External Timber Cladding By Sub-Contractor 100mm x 50mm Internal Timber Framing TF-002B INTERNET :
36 Timber Cladding / Timber Framing 150mm Timber Frame Interface Detail Jamb TF-002C No.12 Wood Screw With Cover Cap By Installer External Timber Cladding By Sub-Contractor 100mm x 50mm Internal Timber Framing TF-002C INTERNET :
37 Rainscreen Cladding / Steel Stud Framing 156mm Steel Frame Interface Detail Cill SF-001A 5 x 50mm Woodscrews (Staggered) By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Aluminium Cill Bedded To Packer In Silicone By Installer 3mm MS Galvanised Fixing Strap By Installer Internal Cill Board By Contractor Internal Cill Board Support Packer By Contractor 5.5mm Self Drilling Tek Screw By Installer Rainscreen Cladding System By Sub-Contractor SF-001A INTERNET :
38 Rainscreen Cladding / Steel Stud Framing 156mm Steel Frame Interface Detail Head SF-001B 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer 5.5mm Self Drilling Tek Screw By Installer Rainscreen Cladding System By Sub-Contractor SF-001B INTERNET :
39 Rainscreen Cladding / Steel Stud Framing 156mm Steel Frame Interface Detail Jamb SF-001C 5 x 50mm Woodscrews (Staggered) By Installer 3mm MS Galvanised Fixing Strap By Installer 5.5mm Self Drilling Tek Screw By Installer Rainscreen Cladding System By Sub-Contractor SF-001C INTERNET :
40 Coupled Mullion Joint Jamb C-001A No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) Aluminium Coupling Trim By Rationel C-001A INTERNET :
41 Close Coupled Mullion Joint Detail Jamb C-001B No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) C-00B INTERNET :
42 Coupled Transom Joint Detail Head/Cill C-002 No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) C-002 INTERNET :
43 Typical 115mm Timber Post Detail Jamb C-003 No.12 Wood Screw And Cover Cap By Installer Silicone Seal By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) Timber Post By Rationel 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Rationel 5 x 15mm Woodscrews By Installer C-003 INTERNET :
44 Typical External Corner Post Detail Jamb C-004A No.12 Wood Screw And Cover Cap By Installer Silicone Seal By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) Timber Corner Post By Rationel 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Rationel 5 x 15mm Woodscrews By Installer Silicone Seal In Grooves By Installer C-004A INTERNET :
45 Typical Internal Corner Post Detail Jamb C-004B No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) Internal Timber Corner Post By Rationel C-004B INTERNET :
46 Typical 60 Corner Post Detail Jamb C-005 No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) 60 Degree Timber Corner Post By Rationel 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Rationel 5 x 15mm Woodscrews By Installer Silicone Seal In Grooves By Installer C-005 INTERNET :
47 Typical 45 Corner Post Detail Jamb C-005A No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) 45 Degree Timber Corner Post By Rationel 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Rationel 5 x 15mm Woodscrews By Installer Silicone Seal In Grooves By Installer C-005A INTERNET :
48 Typical 30 Corner Post Detail Jamb C-005B No.12 Wood Screw And Cover Cap By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) 30 Degree Timber Corner Post By Rationel 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Rationel 5 x 15mm Woodscrews By Installer Silicone Seal In Grooves By Installer C-005B INTERNET :
49 Typical Steel External Corner Post Detail Jamb C-006A Tek Screw And Cover Cap By Installer Silicone Seal By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Steel Post (SHS) By Sub-Contractor 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Installer/Contractor Tight Shims By Installer C-006A INTERNET :
50 Typical Steel External Corner Post Detail Jamb C-006A Tek Screw And Cover Cap By Installer Silicone Seal By Installer 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer Steel Post (SHS) By Sub-Contractor 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Installer/Contractor Tight Shims By Installer C-006B INTERNET :
51 Typical Steel Flitch Plate Detail Jamb SFP-001A No.12 Wood Screw And Cover Cap By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 50MM X 6MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Coupling Timber By Rationel (Bedded On Silicone By Installer) Butyl Tape By Installer SFP-001A INTERNET :
52 Typical Steel Flitch Plate Detail Jamb SFP-001B No.12 Wood Screw And Cover Cap By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 50MM X 12MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Butyl Tape By Installer SFP-001B INTERNET :
53 Typical Steel Flitch Plate Detail Jamb SFP-002A Tek Screw And Cover Cap By Installer Silicone Seal By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 100MM X 10MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Butyl Tape By Installer SFP-002A INTERNET :
54 Typical Steel Flitch Plate Detail Jamb SFP-002B Tek Screw And Cover Cap By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 100/120MM X 10MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Butyl Tape By Installer Tight Shims By Installer SFP-002B INTERNET :
55 Typical Steel Flitch Plate Detail Jamb SFP-003A Tek Screw And Cover Cap By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 130MM X 8MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Steel Section SHS Or CHS To Suit Applied Wind Loadings. By Contractor/Installer (Subject To Formal Calculation) Butyl Tape By Installer SFP-003A INTERNET :
56 Typical Steel Flitch Plate Detail Jamb SFP-003B Tek Screw And Cover Cap By Installer 5.5mm x 32mm Woodscrew (Staggered) By Installer 130MM X 10MM Galvanised MS Reinforcing Bar (Subject To Formal Calculation) By Installer Steel Section SHS Or CHS To Suit Applied Wind Loadings. By Contractor/Installer (Subject To Formal Calculation) Butyl Tape By Installer SFP-003B INTERNET :
57 Typical Fire Stop Detail Between Wall Jamb FS-001 No.12 Wood Screw And Cover Cap By Installer Internal Finish By Contractor Coupling Timber (Bedded On Silicone) By Installer Fire Stop To Architects Detail by Sub-Contractor 200mm Internal Concrete Wall By Contractor Obscured Panel (Aluminium or Emlite) By Rationel FS-001 INTERNET :
58 Typical Fire Stop Detail Between Floor Slab Head/Cill FS-002 Tek Screw And Cover Cap By Installer Internal Finish By Contractor M8 Countersunk Coach Screws With Suitable Plug By Installer Fire Stop To Architects Detail by Sub-Contractor Galv. M/Steel Continuous Angle With Slotted Holes For Slab Movement. Detail By Steelwork Contractor Or Main Contractor Coupling Timber By Rationel (Bedded On Silicone By Installer) 250mm Concrete Floor Slab Obscured Panel (Aluminium or Emlite) By Rationel Rockwool Insulation (or similar) By Contractor FS-002 INTERNET :
59 Typical Fire Stop Detail Between Wall Jamb FS x 50mm Woodscrews (Staggered) By Installer Internal Finish By Contractor 3mm MS Galvanised Fixing Strap By Installer Fire Stop To Architects Detail by Sub-Contractor 200mm Internal Concrete Wall By Contractor 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer 2mm Aluminium Top Hat Pressing (Colour To Match Frames) By Installer/Contractor 5.5mm Woodscrew With Suitable Plug By Installer Rockwool Insulation (or similar) By Contractor FS-003 INTERNET :
60 Typical Fire Stop Detail Between Floor Slab Head/Cill FS mm x 50mm Woodscrew (Staggered) By Installer Internal Finish By Contractor M8 Anchor Bolt or Similar By Installer Fire Stop To Architects Detail by Sub-Contractor Galv. M/Steel Continuous Angle With Slotted Holes For Slab Movement. Detail By Steelwork Contractor Or Main Contractor 20 x 90mm Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer 5.5mm Woodscrew With Suitable Plug By Installer 2mm Aluminium Top Hat Pressing (to Match Frame) By Installer/Contractor 250mm Concrete Floor Slab By Contractor Rockwool Insulation (or similar) By Contractor FS-004 INTERNET :
61 Typical Floor Slab Movement Detail Head MOV mm x 50mm Woodscrew (Staggered) By Installer Internal Finish By Contractor 2-Part Pressing Arrangement Allows For Differential Movement At Head & Floor Slab Below. By Installer Render, Stud, Insulation Vapour Barriers & Lining Board By Contractor 20 x 85mm Non-Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer 5.5mm Woodscrew With Suitable Plug By Installer 5mm Woodscrew With Suitable Plug By Installer Screw Fixing & 3mm Slotted Galvatite Movement Cleats & M6 Nuts & Bolts By Installer Air Seal By Contractor 250mm Concrete Floor Slab Mineral Wool Insulation By Installer MOV-001 INTERNET :
62 Typical Floor Slab Movement Detail Head MOV mm x 50mm Woodscrew (Staggered) By Installer Internal Finish By Contractor 2-Part Pressing Arrangement Allows For Differential Movement At Head & Floor Slab Below By Installer Brickwork, Lintol,, Cavity Closer By Contractor, Insulation & Lining Board By Contractor 20 x 85mm Non-Standard Timber Packer With Upstand Bedded To Frame In Silicone By Installer 5.5mm Woodscrew With Suitable Plug By Installer 5mm Woodscrew With Suitable Plug By Installer Screw Fixing & 3mm Slotted Galvatite Movement Cleats & M6 Nuts & Bolts By Installer Air Seal By Contractor Cavity Closer By Contractor 250mm Concrete Floor Slab By Contractor Mineral Wool Insulation By Installer MOV-002 INTERNET :
63 Typical Out. Open. Door Threshold Detail Cill THE-001 NOV or By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor THE-001 INTERNET : Transport Packer To Be Removed Prior To Installation By Installer, Transport Packer Can Be Used If Required To Fit Cill Pressings But Tolerance Of Door Needs To Be Adjusted To Suit.
64 Typical Out. Open. Door Threshold Detail Cill THE-002 NOV By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor THE-002 INTERNET : Transport Packer To Be Removed Prior To Installation By Installer, Transport Packer Can Be Used If Required To Fit Cill Pressings But Tolerance Of Door Needs To Be Adjusted To Suit.
65 Typical Out. Open. Door Threshold Detail Cill THE-003 NOV By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor THE-003 INTERNET : Transport Packer To Be Removed Prior To Installation By Installer, Transport Packer Can Be Used If Required To Fit Cill Pressings But Tolerance Of Door Needs To Be Adjusted To Suit.
66 Typical In. Open. Door Threshold Detail Cill THE-004 NOV By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor THE-004 INTERNET : Transport Packer To Be Removed Prior To Installation By Installer, Transport Packer Can Be Used If Required To Fit Cill Pressings But Tolerance Of Door Needs To Be Adjusted To Suit.
67 Typical In. Open. Door Threshold Detail Cill THE-005 NOV By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor THE-005 INTERNET : Transport Packer To Be Removed Prior To Installation By Installer, Transport Packer Can Be Used If Required To Fit Cill Pressings But Tolerance Of Door Needs To Be Adjusted To Suit.
68 Typical In. Open. Door Threshold Detail Cill THE-006 NOV By Contractor Door Threshold Bedded On Silicone By Installer Internal Finish Applied On Top Of Screed By Sub-Contractor Transport Packer By Rationel THE-006 INTERNET : Aluminium Cill Bedded To Packer In Silicone By Installer
69 3mm Galvanised Mild-Steel Fixing Strap Holes Drilled As Shown Lenght Varies Per Site Construction A3 March FIX-001 INTERNET :
Linea Weatherboard DIRECT FIX CONCRETE SLAB AND SOFFIT FIGURE 1
Top plate Stud Soffit lining 45mm min nog Fix scotia bead Building underlay/james Hardie rigid air barrier Soffit Detail Building underlay/james Hardie rigid air barrier Bottom plate 25mm wide cant strip.
Installation Window Building In Details
Installation Window Building In Details INSTALLATION Photo courtesy of Rowe Aluminium DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 INSTALLATION Installation Replaces: Scale: NOT TO SCALE Vantage snap-on couplers
The WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 Ver. 1.1 Page 2 of 74 Contents Overview Page 5 Objective Page 5 Scope Page 5 Opening Preparation Page 7 Step P1 Preliminary Check
Composite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
Window Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
Installation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
INSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
FLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013]
![FLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013]](/thumbs/40/20900857.jpg "FLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013]")
FLASHMAN WINDOW AND DOOR FLASHING SYSTEM This Appraisal replaces BRANZ Appraisal No. 573 (2007). Amended 05 February 2016. BRANZ Appraisals Technical Assessments of products for building and construction.
TECHNICAL MANUAL. airlite.com.au
PAGE Awning Windows 1 Casement Windows 7 Double Hung Windows 14 Sliding Windows 21 Sliding Doors 28 Bi-fold Doors 38 Hinged Doors 45 Stacking Doors 54 airlite.com.au AWNING WINDOWS Building In brick veneer
ISSUE 2. Installation Guide
ISSUE 2 Installation Guide Here at Slide and Fold, we LOVE our Bi-Fold Plus range of folding-sliding doors. We want to ensure that your customers love them too. So we have created a new, detailed installation
NRG 75 CRF NRG GREENBOARD WALL SYSTEM
NRG GREENBOARD WALL SYSTEM NRG Energy Efficient Building Systems is pleased to announce a revolution in lightweight cladding systems. NRG Building Systems is the first and only company to achieve CodeMark
Section 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
March 14, 2007. Installation of Bay, Bow and Garden Windows
March 14, 2007 Re: Installation of Bay, Bow and Garden Windows Attached are the Atrium Companies, Inc recommendation for the installation of bay, bow and garden windows. These instructions were developed
The WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 2 of 60 Contents Overview 5 Objective 5 Scope 5 Opening Preparation 7 Step P1 Preliminary Check 8 Step P2 Cut the Underlay 9 Step
PANELIZED HOME INSTALLATION GUIDELINE
PANELIZED HOME INSTALLATION GUIDELINE A typical home package will be constructed of Snap-N-Lock Insulated Panels clad with steel skins. 4" panels will be used for the walls, and 6" panels for the roof.
Module 3.7. Thermal bridging
Module 3.7 Thermal bridging Learning Outcomes On successful completion of this module learners will be able to - Describe construction details which influence thermal bridging. 2 Introduction to thermal
KAHU RESIDENTIAL ROOFING RRKA DETAIL LIST
KAHU DETAIL LIST 00 / 24 COVER SHEET 01 / 24 ROOF RIDGE 02 / 24 SAWTOOTH RIDGE 03 / 24 SAWTOOTH EAVE 04 / 24 ROOF VALLEY 05 / 24 ROOF - CHANGE PITCH 06 / 24 EAVE WITH METALLINE FASCIA 07 / 24 EAVE WITH
!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
Installation Details. D1 General D2 Walls D3 Ceilings D4 Reference. D Installation Details
D Installation Details D1 General D2 Walls D3 Ceilings D4 Reference D Installation Details D Contents D1 General Installation and Fastening Sequence for Steel Studs D1.1 Fastener Selection D1.3 D2 Walls
2.9 WINDOW & DOOR BUCKS
2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place
Superform Products Ltd.
TYPICAL CORNER REINFORCING NOTE : SEE ENGINEERED REBAR SCHEDULES SUPPLIED BY THE MANUFACTURER STEEL REINFORCEMENT WALL CORNER 90 Copyright 2012 Sept. 2012 5.1.1 Rebar Spacing 6" 12" Max. Load LB./FT. 2000
STEP-BY-STEP. construction guide. Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet.
STEP-BY-STEP construction guide Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet. Welcome to our CONSERVATORY AND SUNROOM CONSTRUCTION GUIDE What is the specification
STEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE
STEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE 3 TO 30 METRE SPAN TILT UP METHOD SUPPLIED BY: Last update 8 December 2010 2010 FBHS (Aust) Pty Limited FBHS (Aust) Pty Limited ABN 83 126 232 504 trading
How to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
Installation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
Energy Company Obligation (ECO): Technical Monitoring Questions
Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified
INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS
2009 Pella Corporation INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS Part Number: 80WH0100 Installation Instructions for Typical Wood Frame Construction.
WINDOW PANNING AND TRIMS
OCTOBER, 2010 PANNING AND TRIMS GENERAL INFORMATION 1 EXTERIOR PANNING Panning is primarily used to cover the perimeters of existing building openings prior to the installation of replacement windows.
Clad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
300mm. 2mm MIN GAP. PLACE 100mm X 100mm. SO THAT IT IS 38mm INTO
INSTALL PEEL & STICK (P&S) GUSSETS WITH PRIMER AS PER MANUFACTURERS INSTRUCTIONS 2mm MIN GAP IN SHEATHING STEP 1 PLACE 100mm X 100mm PIECE OF P&S IN CORNER SO THAT IT IS 38mm INTO THE OPENING EACH WAY
Good Craftsmanship Guide. Carpentry and Joinery- Carcassing
Good Craftsmanship Guide Carpentry and Joinery- Carcassing Introduction This Good Craftsmanship Guide highlights key problems with the major elements of Carpentry and Joinery - Carcassing, and gives guidance
How To Test For An Architectural Test
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: CORAL ARCHITECTURAL PRODUCTS SERIES/MODEL: PW 256 with Door Openings PRODUCT TYPE: Aluminum Impact Resistant Curtain Wall System
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
SG Series 65mm Frame Windows (Fixed Lite Window Illustrated)
(Fixed Lite Window Illustrated) SINGLE LEAF CLADDING / CORRUGATED STEEL (Awning Window Illustrated) SINGLE LEAF CLADDING / FOAM BOARD (Casement Window Illustrated) BRICK VENEER CONSTRUCTION (Horizontal
Timber Frame Construction
Timber Frame Construction Introduction Design and Detailing What is timber? Failure modes History of timber frame construction Forms of timber frame construction Live and dead loads Wind loads Roof construction
PB301 July 2009. Lightweight Building Solutions. Bushfire Protection. www.boral.com.au/bushfireprotection
PB301 July 2009 Lightweight Building Solutions Bushfire Protection www.boral.com.au/bushfireprotection Attached or adjacent within 6m roofed structures such as garages, carports, verandas and the like,
Technical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
TEST REPORT. Report No.: A9814.01 109 44. Rendered to: BAMCO INC. Middlesex, New Jersey. PRODUCT TYPE: Wall Cladding System SERIES/MODEL: Dry Concept
Architectural Testing TEST REPORT Report No.: A9814.01 109 44 Rendered to: BAMCO INC. Middlesex, New Jersey PRODUCT TYPE: Wall Cladding System SERIES/MODEL: Dry Concept AAMA 508 07, Voluntary Test Method
ModuSec. Secure and efficient IT room solutions. Turnkey Modular Construction Fast clean build to any size or shape
ModuSec Secure and efficient IT room solutions Turnkey Modular Construction Fast clean build to any size or shape Room in room Standalone external build Transportable Modusec SR Options Modusec SR Options
Contents. APA Construction Details. Full fill cavity walls 2-13. Partial fill cavity walls 14-25. Solid externally insulated walls 26-37
Contents Pages Full fill cavity walls 2-13 Partial fill cavity walls 14-25 Solid externally insulated walls 26-37 Appendix (BRE confirmation of Ψ and y-values) 38-40 Page 1 of 40 APA Construction Details
Owner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
V80 HEAD DETAIL - SECTION VIEW DRAWING SCALE 1:2. Dwg. No. V10101. 13mm min. 85mm. 72mm 95mm 65mm. 26mm. 10mm 60mm 75mm. 135mm.
13mm min. 72mm 95mm 65mm 85mm 26mm 10mm 60mm 75mm 135mm 145mm V80 HEAD DETAIL - SECTION VIEW Dwg. No. V10101 Manually operated blind with gearbox showing 90 & 45 degree crank penetrations in section view.
Information Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES Tools Required Tape Measure Hammer Slotted Screw Driver #2 & #3 Philips Screw Driver 3-4 Foot Level 12 Pry Bar Cold Chisel
K. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
Fig. 2 WALL-TO-WALL PANEL CONNECTIONS CORNER WALL CONNECTION
SIPS SCREWS WITH MINIMUM 1" PENETRATION IN WOOD MEMBER IN SIP WALL PANEL CONNECTED TO @ 24" O.C. MAXIMUM OUTSIDE SKIN EACH SIDE OF FRAMING TYP. AS RECOMMENDED BY FOAM CORE AS EACH SIDE OF FRAMING TYP.
7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME
7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved
IN00419 (rev A) Aqua 6 Glide Quadrant and Off-set Quadrant Enclosure
IN00419 (rev A) Aqua 6 Glide Quadrant and Off-set Quadrant Enclosure Instruction suitable for both Quadrant & Off-set Quadrant variations. Instruction suitable for both Right and Left Hand fixing variations
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Packaged Terminal Air Conditioner Wall Sleeve Installation
Installation & Maintenance Data IM 1196 Group: PTAC Part Number: 910141799 Date: October 2013 Packaged Terminal Air Conditioner Installation x 42" PGAN with Top-Mounted Hydronic Heat Note: Installation
Electrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016. Underground branch circuit feeding a detached garage:
Electrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016 * Garage construction requires permits (electrical, building) * Permits must be applied for at the time. * Dial
SOUND INSULATION FOR EXTERIOR WALLS AND FACADE SYSTEMS
NOISE TECHNICAL FACT SHEET FACT SHEET 5 SOUND INSULATION FOR EXTERIOR WALLS AND FACADE SYSTEMS The sound insulation of exterior walls and roof-ceiling systems refers to their ability to reduce external
CERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
PASSIVE FIRE PROTECTION SYSTEMS Application & Technical Manual: Ceilings & Floors
PASSIVE FIRE PROTECTION SYSTEMS Application & Technical Manual: Ceilings & Floors For distribution in Asia Pacific PASSIVE FIRE PROTECTION SYSTEMS Application & Technical Manual: Ceilings & Floors Contents
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised November 27, 2013 the Easton - R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
TIMBER FRAME STANDARD DETAILS SEPTEMBER 09
Building 1 Grosvenor Court, Hipley Street OLD WOKING, SURREY GU22 9LL Tel: +44 (0) 1483 769518 Fax: +44 (0) 1483 770863 E-mail: design@silvatecdesign.com Internet: www.silvatecdesign.com TIMBER FRAME STANDARD
Extension. for. Pretend Customer 123 A Road HA7 9BP. at: 123 A Road HA7 9BP
for Pretend Customer at: Pretend Customer Site address: Monday, 23 November 2015 Dear Pretend Customer, Subject: Thank you for your valued enquiry and instructions to quote for the above project. We are
Guidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
EXAMPLE BILL OF MATERIALS
EXAMPLE BILL OF MATERIALS COMPONENTS 00.001 YELLOW ENVELOPE PACK 0 1 - LABELLED "ATTENTION BUILDER". [CONSISTS OF :- A3 & A4 PLANS, PLANS CONSTRUCTION MANUAL, BILL-OF-MATERIALS, VARIOUS DETAILS.] 00.002
Cl/SfB. Summer 2011 Issue 3. The Good Practice Guide for the Installation of Replacement Windows and Doors
Cl/SfB Ro Summer 2011 Issue 3 The Good Practice Guide for the Installation of Replacement Windows and Doors Contents Introduction and Scope 5 Section 1 Principles 6 General Requirements 6 Strength and
House building is changing fast NHBC unveils new Standards Chapters on curtain walling and cladding, and light steel framed walls and floors
W42_Stand_Extra_32 15/3/05 9:17 am Page 2 NHBC s technical newsletter April 2005 Issue 32 This edition includes: 2 House building is changing fast NHBC unveils new Standards Chapters on curtain walling
TFL CUSTOM FIREPLACES WITH MASONRY BRICK LININGS. standard INSTALLATION SPECIFICATION INTO TIMBER FRAMING
6.CW.1A TFL CUSTOM FIREPLACES WITH MASONRY BRICK LININGS wood or gas standard INSTALLATION SPECIFICATION INTO TIMBER FRAMING The Fireplace Ltd is able to design and fabricate custom brick open masonry
UNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
How To Repair A Boat Landing Deck With A Boat Bed
RESIDENTIAL INSULATED SHEATHING INSTALLATION GUIDE Residential Insulated Sheathing Installation Guide ROXUL COMFORTBOARD IS Table of Contents Slab-on-grade-to Above Grade Wall...1 Foundation Wall at Footing
DESIGNERS GUIDE TO DOMESTIC CONSERVATORIES
WBCA 403 DESIGNERS GUIDE TO DOMESTIC CONSERVATORIES A guide to assist those intending to install or who are involved in installing conservatories. Includes information about: conservatory and component
Installation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
Hanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
FIRE RATED GLAZING System Guide
SYSTEM GUIDE Issue date: 05-05-2015 Expiry date: 31-12-2016 System Guide Introduction Pyropanel Developments are specialists in fire rated glazing solutions, and our systems are designed for easy installation
CI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
Brick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
Installation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
IRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN. 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION
IRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION Bill Robinson BSc. C. Eng. M. I. Struct. E. Timber Design Services 1 IS440 Timber frame
Glass partitions SFB 3074
Glass partitions SFB 3074 Our facade system SFB 3074 is innovative in its design. We have made a great effort to obtain an energy effective system. The future requirements regarding the economical use
RELAZZO DECKING THE TERRACE. INSTALLATION GUIDE. Construction Automotive Industry. REHAU R20680 EN 05.2015 www.rehau.com/relazzo
Construction Automotive Industry RELAZZO DECKING THE TERRACE. INSTALLATION GUIDE REHAU R20680 EN 05.2015 www.rehau.com/relazzo Scan the QR code and learn more: RELAZZO DECKING THE TERRACE. Installation
609 West Rock Road, Radford,VA 24141 540-633-5000 / (fax) 540-731-3712 RECOMMENDED ATTACHMENTS & CONNECTION DETAILS
609 West Rock Road, Radford,VA 24141 540-633-5000 / (fax) 540-731-3712 RECOMMENDED ATTACHMENTS & CONNECTION DETAILS INDEX OF DRAWINGS SECTION A: A-1 = METAL TRACK TO PANEL ATTACHMENT A-2 = WOOD PLATE TO
Walls. Add Strength and Water Resistance When Repairing Your. Replace damaged framing members when walls are open
Add Strength and Water Resistance When Repairing Your Walls Any home repair or remodeling work you do presents an opportunity to make your home fare better in the next storm. Whether you are just replacing
Residential Inspection Guidelines
Residential Inspection Guidelines 201 Pre-Pour Foundation Dimensions Building Location Certificate - if required in the building consent Construction and Advice Notes Check the building dimensions against
Table of Contents. Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide
Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer /Installers.. 1 Fastener Placement and Selection.2-3
H-Stud Area Separation Wall System
12 TH EDITION 09 21 16.33/NGC H-Stud Area Separation Wall System 09 21 16.33 139 H-STUD AREA SEPARATION WALL SYSTEM The fire-protection of gypsum-based Area Separation Walls is demonstrated in dramatic
PART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
Plaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
Confort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
GUIDELINES FOR INSTALLATION OF AIR CONDITIONING UNITS 174-180 PHILLIP STREET, SYDNEY
GUIDELINES FOR INSTALLATION OF AIR CONDITIONING UNITS 174-180 PHILLIP STREET, SYDNEY July 2008 1.0 SCOPE These guidelines describe the way in which air conditioning units shall be installed or replaced
Mark Cramer Inspection Services, Inc.
Mark Cramer Inspection Services, Inc. 492 Twentieth Avenue, Indian Rocks Beach, FL 34635-2970 (727) 595-4211 Fax (727) 596-7583 Certified Member #12085 American Society of Home Inspectors Construction
Confort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
Guidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
INSTALLATION INSTRUCTIONS
door frames Engineered product systems INSTALLATION INSTRUCTIONS door frames MINIMALIST DOOR FRAME Fry Reglet Flush Door frames are designed for use with 3 5/8 studs with ½ drywall both sides (4 5/8 throat
PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom
plumbing products guide
plumbing products guide radiator pipe guide & seals A significant development in the drive to reduce air leakage and heat loss. Installations such as that shown are all too common. The detail is poorly
MIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Report No.: B8049.01-401-18. Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida
Architectural Testing MIAMI-DADE COUNTY PERFORMANCE TEST REPORT Report No.: B8049.01-401-18 Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida PRODUCT TYPE: Aluminum Storefront with Double Doors SERIES/MODEL:
We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
Improving the flood resistance of your home. Advice sheet 4: Flood-resilient walls.
Improving the flood resistance of your home Advice sheet 4: Flood-resilient walls. This sheet provides guidance on identifying different types of wall, and reducing the flow of floodwater through them
Free 12 x 8 Shed Plan With Illustrations, Blueprints & Step By Step Details
Free 12 x 8 Shed Plan With Illustrations, Blueprints & Step By Step Details Brought To You By: MyShedPlans Click Here To Download 12,000 Shed Plans >> 12 x 8 Basic Shed This 8 12-ft. shed features a simple
Construction details. Technical specifications
Construction details Technical specifications Construction details CONTENTS Introduction 3 Typical building 7 Thermal performance of built-up systems 8 Built-up roof constructions 14 Built-up wall constructions
Fire Barrier Systems. For inhibiting the spread of fire and smoke in concealed spaces
CI/SfB Km1 (K22) November 2006 (replaces July 2005 issue) Construction type Cavity Barriers Fire Barrier Systems For inhibiting the spread of fire and smoke in concealed spaces As part of the comprehensive