LED FLEX LIGHTLINE. User Manual. (Patented product)

Size: px

Start display at page:

Download "LED FLEX LIGHTLINE. User Manual. (Patented product)"

Isabel Brittney Ross
7 years ago
Views:

1 LED FLEX LIGHTLINE User Manual (Patented product)

2 Neon light (glass tube) is the main linear lighting product for outdoor use, greatly demanded in the market. But, neon light has many shortcomings: complex installation, fragility, high power consumption and short life, etc. Due to source of light and propriety of materials, there is still no perfect solution or improvements. After researching and developing for over 1 year, we finally create an ideal substitution for neon light. It replaces source with light emitting diodes (LEDs), replaces the glass tube with environmental PVC; theretofore, making it so soft that it can be bended at any angle and allowing easy and simple installation, much more environmental and longer life, whilst on the other hand without worse in brightness and effects. So, you may wonder who is the colorful, crystal and beautiful one in the night. Today, we present to you our LED Flex Lightline! Technical Specification: Daylight Cool white R+B Voltage Input Section Measurement Cutting LED Power No. of Length Spacing Consumption LEDs/Unit Packing 1m 1.25cm 4W/unit 80 50m/Carton 1.8m 1.25cm 8W/unit m/Carton Brightness: LED Daylight Cool White + Ultra Bright Brightness (lux) Note: Efficacy under the same condition Efficacy: 1

3 LED Ultra Bright White Cool White + Total Output (LM/FT) Efficacy (lux) Features compared with neon light: Low voltage (24V/12V) is available; Low power consumption (4W), save over 70% energy; Same brightness; 100,000-hour life; More durable and supple; Minimum bending radius: 4cm Flexible cut length, easy for making up different characters, patterns and forms; High safety; Easy for transportation; Easy and cost saving for installation; Comparison of energy consumption cost between common glass neon light and LED Flex Lightline (300FT, red light) Region Glass Neon LED Flex lightline Annual Save Light Mid-West of USA $1, $253.29/$ $1,592.51/$1, The annual save amount is based on 24 hours a day and 365 days a year. Common glass neon light: 8.75W/FT LED Flex Lightline: 1.21W/FT (R, Y) or 1.34W/FT (B, W, G) 2

Connectors: 1.I-Connector 2. T-Connector 3. L-Connector Mounting Accessories: Including: 1. Mounting Channel; 2. Mounting Clip; 3. T-Connector; 4. I-Connector; 5. L-Connector; 6. End Cap; 7.

4 Connectors: 1.I-Connector 2. T-Connector 3. L-Connector Mounting Accessories: Including: 1. Mounting Channel; 2. Mounting Clip; 3. T-Connector; 4. I-Connector; 5. L-Connector; 6. End Cap; 7. Connecting Pin; 8. LED Flex lightline; 9. Controller; 10. Power Supply. Installation: The universal and user-friendly design of the LED Flex Lightline allows easy installations on flat surfaces, such as wood block, plastic board, metal board and wall; and, your innovative shapes can be easily realized with the convenient connections. Before connection, please note the followings: 1. Make obvious marks on where you are going to cut the LED Flex Lightline. 2. Fasten the mounting clips with screws by every certain and safe distance. It is suggested to use a mounting clip on the corner. 3. The illuminating side of the LED Flex Lightline should always keeps outside when putting the LED Flex Lightline into a mounting channel or a mounting clip. 3

5 Installation instructions: A. Cut at cutting length B. Linear installation C. Curvy installation Cutting only allowed at cutting Accessories: mounting channel Accessories: mounting clip, screws length. D. 90 installation E. 180 installation F. Arched installation Accessories: mounting clip, screws Accessories: mounting clip, screws Accessories: mounting clip G. Concave installation H. Slot installation Accessories: mounting clip Install the LED Flex Lightline into a narrow slot. Safety Instructions: A. Read the user manual before installation; always follow the instructions in the user manual; B. Cuttings are only allowed at the cutting length; C. Before connecting with connectors, bending the LED Flex Lightline back-n-forth. Extra copper wires should be cleared with scissor; D. Measure the power consumption of the total length and use the appropriate power supply; E. Make sure the polarities are correctly be recognized; F. Do not use the LED Flex Lightline with any broken isolation; G. Frequent checking after installation is required; H. Do not put the LED Flex Lightline into water; I. Do not keep kneading the LED Flex Lightline; J. Do not power up the LED Flex Lightline before unpacking from the packing roll. 4

COLORS AVAIALBLE: RED, YELLOW, GREEN, BLUE, ORANGE, WHITE, RGB (MULTICOLOR) R = Red Y = Yellow G = Green B - Blue. Brightness.

COLORS AVAIALBLE: RED, YELLOW, GREEN, BLUE, ORANGE, WHITE, RGB (MULTICOLOR) R = Red Y = Yellow G = Green B - Blue. Brightness. LED NEON FLEXIBLE LIGHT The Neon Alternative 1 - REDUCE ENERGY COST BY MORE THAN 70% 2 - REDUCE LABOR AND MAINTENANCE COSTS. LONG LIFE LED - 100,000 hours! LED NEON FLEXIBLE LIGHT is the neon alternative