SPARE PARTS LIST CENTRIFUGAL PUMP FORM NO.: UC453145UK REVISION: 04/2015 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.
|
|
|
- Gerard Wheeler
- 7 years ago
- Views:
Transcription
1 SPARE PARTS LIST CENTRIFUGAL PUMP FORM NO.: 55UK REVISION: 0/05 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODT.
2 APV Form no.: 55UK revision 0/05 Table of contents Page. Pump dimensions. Adjustable Feet. Bracket type A. Bracket type B. /00/0 Adjustable feet 5.5 /00/0 Bracket type A. Pump complete 7. Impeller 9. Shaft seal. Fixing Kit. Face Kit 5. Complete seal kit 5. Complete seal kit, single 5. Complete seal kit, double. O-rings kit 5 7. Shaft. Extension frame and shaft guard 7 9. Adjustable Feet 9 9. Type Type Type Type 0-5 (/00/0) 0. Bracket Type A 0. Type Type 0-5. Bracket Type B. Shroud 5
3 Form no.: 55UK revision 0/05. Pump dimensions. Adjustable Feet TG. 0- i Pumpe TG TG Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm
4 Form no.: 55UK revision 0/05. Pump dimensions. Adjustable Feet 0-M TG 00/0 00/ * *5 *7, 0 0 A AA B *B C E F D D *D *D X HA * i Pumpe Pump type 00/70 0/90 05/75 055/0 0/75 00/00 05/0 00/0 0/0 50/0 00/0 00/55 0/ * *9 * * * * * DN00 5, , DN50,5 7 0,,5 7 *7 *00 *5 *,5 *7 * *5 *0, DN50 *7, *0, *0, *7, *0, * , *7 *0, 5 95 * DN00 DN50 *00 DN ,5 * 9 0 5,5 * *7, * *5 *0, 5 9 * , *7 *0, TG. TG. TG. 0 90S 90L 00L M S M 0M 0L 0M 0L 00L 5S 5M 50M K M P * P(/0/90) PA Q * H, L /00/0 5 /00/ /00/70 /0/90 00 /05/75 /055/0 /0/75 00 /00/00 5 /05/0 /00/0 /0/0 /50/0 /00/0 /00/55 /0/90 * /00/0 P=, Q= Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm
5 Form no.: 55UK revision 0/05. Pump dimensions. Bracket type A 0 - M 0M - 50M 0 90S 90L 00L M S M 0M 0L 0M 0L 00L 5S 5M 50M X L PA T HA Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm
6 Form no.: 55UK revision 0/05. Pump dimensions. Bracket type B 0 - M 0M - 00L 0 90S 90L 00L M S M 0M 0L 0M 0L 00L X L P PA T HA Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm
7 Form no.: 55UK revision 0/05. Pump dimensions (/00/0). /00/0 Adjustable feet TG. 0-5 /00/0 0 TG. TG. 5 TG A TG B C D D E F H HA K L M P PA X ø0 ø5, ø570 ø50 ø70, ø70, ø570 ø TG. 0-5 Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm 5
8 Form no.: 55UK revision 0/05. Pump dimensions (/00/0).5 /00/0 Bracket type A 0M - 50M 0-5 /00/0 0M 00L 5M 50M 0 5 X L PA T HA Tolerances: +0 B: mm F: mm -0 D, D : Nominal Z: K: + 5 mm Others: + mm
9 Form no.: 55UK revision 0/05. Pump complete Part No. with do not cover pumps sold with. certificate. For. spare parts, contact SPX FT. 7
10 Form no.: 55UK revision 0/05. Pump complete 00/0 Pump type 00/0 00/70 0/90 05/75 055/0 0/75 00/0 Pos Qty Description Part No. a b a b 5 7a 7b 9a 9b Pump housing Inducer housing Cap nut Inducer O-ring Impeller Shaft seal O-ring Back plate Back plate Pin Clamp ring M0/M O-ring Shaft Shaft guard Extension frame Bracket() Frame Shroud s/p5 s/p5 s/p9-0 s/p9-0 s/p- s/p- s/p5 s/p5 75# 5# s/p5 s/p5 s/p s/p s/p s/p s/p7- s/p7- s/p7- s/p7- s/p7 s/p9- s/p9- s/p5 s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p7-70 s/p7 s/p9- s/p5 00/00 05/0 00/0 0/0 50/0 00/0 00/55 0/90 a b a b 5 7a 9a 9b Pump housing Inducer housing Cap nut Inducer O-ring Impeller Shaft seal O-ring Back plate Pin Clamp ring M/M0 O-ring Shaft Shaft guard Extension frame Bracket() Frame Shroud 75 s/p5 s/p9-0 s/p- s/p5 090 s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p s/p7 s/p9- s/p s/p5 s/p9-0 s/p- s/p s/p5 s/p s/p s/p7- s/p7- s/p7 s/p9- s/p5 s/pxx = see page # Integrated with extension frame item
11 Form no.: 55UK revision 0/05. Impeller Impeller Ø Ø00 Ø95 Ø90 Ø5 Ø0 Ø75 Ø70 Ø5 Ø0 Ø55 Ø50 Ø5 Ø0** Ø5 Ø0 Ø5 Ø0 Ø5 Ø0 Ø05 Ø00 Ø * * * * * * * * * * * * * Pump type 00/0 00/70 05/75 055/0 Part No * * * * 795 7* 779 7* 70 7* 7* 75* 00/ * Low Flow Impeller ** Ø /00/0 Part No. page and 9 do not cover pumps sold with. certificate. For. spare parts, contact SPX FT. Impeller Ø Ø0 Ø0 Ø00 Ø90 Ø0 Ø70 Ø0 Ø50 Ø0 Ø0 Ø0 Ø0 Ø00 Ø90 Ø0 Pump type 00/0 Part No
12 Form no.: 55UK revision 0/05. Impeller Impeller Ø Ø90 Ø5 Ø0 Ø75 Ø70 Ø5 Ø0 Ø55 Ø50 Ø5 Ø0 Ø5 Ø0 Ø5 Ø0 Ø5 Ø0 Ø05 Ø00 Ø95 Ø90 Ø5 Ø0 Ø75 Ø70 Ø5 Ø0 Ø55 Ø50 Ø5 Ø0 Ø5 00/0 0/75 05/0 00/0 0/0 00/0 00/55 0/90 0/90 50/ Pump type Part No. 57 Ø05 Ø95 0 Ø0 Ø00 Ø
13 Form no.: 55UK revision 0/05. Shaft seal. Fixing Kit A. Single Seal Ø5+Ø5 A. Single Seal Ø55 B. Double Seal Ø5+Ø5 B. Double Seal Ø55 Fixing kit Ø5 Shaft size Ø5 Ø55 Seal type Description Material Part no. A Single Seal Complete Seal housing Spring Pressure ring Drain pipe AISI AISI AISI PTFE 770 (7700) 775 (770) 05 B Double seal Complete Spring Pressure ring Seal housing Pressure ring Union elbow AISI AISI AISI AISI x * O-ring s Mx0 s M s Mx0 s Mx50 EPDM AISI AISI AISI AISI * Only used for /00/00 Rebuild from single to double seal: x Fixing kit double + x Face kit (see page ) + x 5.0 Rebuild from double to single seal: x Fixing kit single + x 5.
14 Form no.: 55UK revision 0/05. Shaft seal. Face Kit A. Single Seal Ø5+Ø5 A. Single Seal Ø55 B. Double Seal Ø5+Ø5 B. Double Seal Ø55 secondary seal primary seal secondary seal primary seal Shaft size material Ø5 Ø5 Ø55 Face kit 5.5 O-rings x 5. Stationary seal 5.7 Rotary seal 5. Pin Part no. Reaction Bonded SiC/Car EPDM EPDM Reaction Bonded SiC Resin Bonded Carbon AISI L Reaction Bonded SiC/Car FPM FPM Reaction Bonded SiC Resin Bonded Carbon AISI L Reaction Bonded SiC/SiC EPDM EPDM Reaction Bonded SiC Reaction Bonded SiC AISI L Reaction Bonded SiC/SiC FPM FPM Reaction Bonded SiC Reaction Bonded SiC AISI L Self Sintered SiC/Car EPDM EPDM Self Sintered SiC Resin Bonded Carbon AISI L 7 7 * Self Sintered SiC/Car FPM FPM Self Sintered SiC Resin Bonded Carbon AISI L 7 77 * Self Sintered SiC/SiC EPDM EPDM Self Sintered SiC Self Sintered SiC AISI L 7 7 * Self Sintered SiC/SiC FPM FPM Self Sintered SiC Self Sintered SiC AISI L 7 79 * Knife Edge SiC/SiC FPM FPM Reaction Bonded SiC Reaction Bonded SiC AISI L * * Please contact SPX FT Seal type B: All combinations of materials are available - SPX FT recommends to use SiC/Car as secondary seal All seal rings marked as below: SSwwyyx - SS (Self Sintered SiC) - ww (week of production) - yy (year of production) - x (batch) RBwwyyx - RB (Reaction Bonded SiC) - ww (week of production) - yy (year of production) - x (batch)
15 Form no.: 55UK revision 0/05 5. Complete seal kit 5. Complete seal kit, single Reaction Bonded SiC Pump type Material 00/0 00/0 00/70 0/90 05/75 055/0 0/75 Part No. 00/0,, 0, 5., x 5.5, 5., 5.7, 5. SiC/SiC EPDM SiC/Car EPDM SiC/SiC FPM SiC/Car FPM /00 05/0 00/0 0/0 50/0 00/0 00/55 0/90,, 0, 5., x 5.5, 5., 5.7, 5. SiC/SiC EPDM SiC/Car EPDM SiC/SiC FPM SiC/Car FPM Self Sintered SiC Pump type Material 00/0 00/0 00/70 0/90 05/75 055/0 0/75 Part No. 00/0,, 0, 5., x 5.5, 5., 5.7, 5. SiC/SiC EPDM SiC/Car EPDM SiC/SiC FPM SiC/Car FPM * * * * 00/00 05/0 00/0 0/0 50/0 00/0 00/55 0/90,, 0, 5., x 5.5, 5., 5.7, 5. SiC/SiC EPDM SiC/Car EPDM SiC/SiC FPM SiC/Car FPM *Please contact SPX FT
16 Form no.: 55UK revision 0/05 5. Complete seal kit 5. Complete seal kit, double Reaction Bonded SiC Pump type Material 00/0 00/0 00/70 0/90 05/75 055/0 0/75 Part No. 00/0,, 0, x 5.5, x 5., x 5.7, 5., 5.0 SiC/SiC - SiC/Car EPDM SiC/Car - SiC/Car EPDM SiC/SiC - SiC/Car FPM SiC/Car - SiC/Car FPM /00 05/0 00/0 0/0 50/0 00/0 00/55 0/90,, 0, x 5.5, x 5., x 5.7, 5., 5.0 SiC/SiC - SiC/Car EPDM SiC/Car - SiC/Car EPDM SiC/SiC - SiC/Car FPM SiC/Car - SiC/Car FPM Self Sintered SiC Pump type Material 00/0 00/0 00/70 0/90 05/75 055/0 0/75 Part No. 00/0,, 0, x 5.5, x 5., x 5.7, 5., 5.0 SiC/SiC - SiC/Car EPDM SiC/Car - SiC/Car EPDM SiC/SiC - SiC/Car FPM SiC/Car - SiC/Car FPM * * * * 00/00 05/0 00/0 0/0 50/0 00/0 00/55 0/90,, 0, x 5.5, x 5., x 5.7, 5., 5.0 SiC/SiC - SiC/Car EPDM SiC/Car - SiC/Car EPDM SiC/SiC - SiC/Car FPM SiC/Car - SiC/Car FPM * Please contact SPX FT
17 Form no.: 55UK revision 0/05. O-rings kit Pump type Material 00/0 00/0 00/70 0/90 05/75 055/0 0/75 Part No. 00/0,, & 0 EPDM ,, & 0 FPM(Viton) /00 05/0 00/0 0/0 50/0 00/0 00/55 0/90,, & 0 EPDM ,, & 0 FPM(Viton)
18 Form no.: 55UK revision 0/05 7. Shaft Pump type Shaft Ø5 /00/0 7 /00/ /00/ /05/ /055/ /00/ /05/ Qty /0/90 /0/75 /00/0 /0/0 /50/0 i/50/0* /00/0 /00/55 /0/90 Qty. Pump type * i/50/0 -pol motor Pump type 55 Pos. Shaft Ø Shaft Ø /00/ Qty
19 Form no.: 55UK revision 0/05. Extension frame and shaft guard Right Left Pump type /00/0 /00/0 /00/70 /0/90 /05/75 /055/0 /0/75 /05/0 /00/0 /0/0 /50/0 /00/0 /00/55 /0/ * ** 5*** /00/ Extension frame /00/ * ** *** Flange
20 Form no.: 55UK revision 0/05. Extension frame and shaft guard Pump type 00/0 R/L 00 00/0 00/70 0/90 05/75 055/0 0/75 05/0 00/00 00/0 0/0 00/0 00/55 0/90 Qty. R/L R L R/L R/L R L R/L R L R/L R L R/L R L R/L R L R/L R L R/L R= Right L=Left Shaft guard R/L R/L /0 R/L R 50/0 L (00/0) Description Qty Nut **707 **707 **707 ** *779 *779 * * Qty. = ** Qty. = Part no **770 **770 **7779 **705 **705 **705 **7779
21 Form no.: 55UK revision 0/05 9. Adjustable Feet 9. Type 0-0 (/00/0) (00/0) Centre height 0 0 Qty. Description Part no. Complete frame Frame Leg, complete Split bushing * Nut * 700** Nut, flange head 700** * /00/0 Qty. = ** /00/0 Qty. = 9
22 Form no.: 55UK revision 0/05 9. Adjustable Feet 9. Type Centre height Qty. Description Part no. - - Complete frame Frame for front leg Angle plate Angle plate, R Angle plate, L Leg, complete Leg front, complete Leg back, complete Split bushing Nut , flanged head
23 Form no.: 55UK revision 0/05 9. Adjustable Feet 9. Type Centre height Qty. Description Part no. - - Complete frame Nut Leg Threaded rod O-ring Ball type foot Fitting Fitting
24 Form no.: 55UK revision 0/05 9. Adjustable Feet 9. Type 0-5 (/00/0) Type Type Type Type Centre height Qty. Description Part no. - - Complete frame Frame Fitting 799 5* Leg Machine feet Ball type foot ** ** Nut Nut * 0 Qty. = ** Type Qty. =
25 Form no.: 55UK revision 0/05 0. Bracket Type A 0. Type 0-0 Qty Description Centre height Part no Bracket, complete Bracket Angle plate Bolt Nut, fl. head Type 0-5 Qty. Description Centre height Part no. - - Bracket, complete Bracket Fitting, front Fitting, front Fitting, rear M Fitting, rear L Fitting, rear L/M Threaded rod Nut, fl. head
26 Form no.: 55UK revision 0/05. Bracket Type B Centre height Qty. Description Part no. - - Bracket, komplete Bracket Angle plate Fitting, back * ** Nut, fl. head * 00 Qty. = ** 00 Qty. =
27 Form no.: 55UK revision 0/05. Shroud /00/ Qty. Description Part no. Shroud Collar Nut Qty. Description Part no. Shroud Collar
28 CENTRIFUGAL PUMP SPARE PARTS LIST SPX Flow Technology Poland sp. z o.o. Hermana Frankego 9 5- Bydgoszcz, Poland P: (+) F: (+) SPX reserves the right to incorporate design and material changes without notice or further obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information please visit ISSUED 0/05 Original document COPYRIGHT 0 SPX Corporation
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B
Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR
Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD
: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
SC351. Model: SC351 NIL. Part List US-English
Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
HTM SS Metallic mag drive centrifugal pumps. HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES
HTM SS Metallic mag drive centrifugal pumps HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES CARATTERISTICHE Le pompe centrifughe in metallo a trascinamento magnetico serie HTM SS
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
How To Maintain A Gardner Dianner Pump
GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
CUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
MDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
Service Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Aprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Illustrated Parts List
More time on the road Illustrated s List FRLO-640C-T November 0 Contents How To Use The Illustrated s List... CASE ASSY... 4 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT ASSY... 8 ELECTRONIC CONTROL UNIT...
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions
MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions MONITOR PRODUCTS, INC. 15400 Flight Path Dr Brooksville, FL 34604 Tel: 1-800-334-4591 or 352-544-2620 Sales: ext 201 Technical Support:
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
PRINCE 50 Parti di ricambio agg. al 30-11-09
. 缸 头 罩 部 件 CYLINDER HEAD COVER(FOR EUROPE) 50000 COVER COMP HEAD 2 5000 GASKET HEAD COVER 3 50002 Aeration Head Cover 4 50372 AERATION CAP 5 50355 TUBE BREATHER 6 50356 TIE-IN 7 50358 AERATION TUBE ASSY
Volkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)
19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
MACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
INSTRUCTIONS. FLHR/C/S (Road King) FRONT END LOWERING KIT 1WARNING -J03242 REV. 10-19-04. General. Removal (Left and Right Forks) Kit Number 54614-05
INSTRUCTIONS -J04 REV. 0-9-04 General FLHR/C/S (Road King) FRONT END LOWERING KIT This kit is designed for installation on 00 and later FLHR/C/S Model Motorcycles. Road King models use the conventional
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
COMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2751TQ0 (WHITE) CGM2751TQ1 (WHITE) 5 12 Litho in U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. W10119631 Rev. C TOP AND CONSOLE PARTS W10119631 2 TOP AND CONSOLE
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
Operating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
Bell & Gossett Parts List DHP-650-PL. Replacement Parts for Hoffman Series VBF & Hoffman Series HBF. Boiler Feed Units
Bell & Gossett Parts List DHP-650-PL Replacement Parts for Hoffman Series VBF & Hoffman Series HBF Boiler Feed Units SERIES VBF & HBF Index How to use this Parts List...Page 3 30 VBF (Part number 161024
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
VE13P-EU. Model: VE13. Lista Części Polish
Model: VE13 Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 RECOMMENDED SPARE PARTS 13 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
TABLE-TYER / TABLE-TYER SS POWER STRAPPING MACHINES 04/12/07
TABLE-TYER / TABLE-TYER SS POWER STRAPPING MACHINES 04/12/07 CONGRATULATIONS Thank you for purchasing your Table-Tyer Strapping Machine. The Table-Tyer has been designed to be a reliable, maintenance free
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty
SPARE PARTS LIST AND ASSEMBLING GUIDELINE FOR EM 50 FAN
SPRE PRTS LIST ND SSEMLING GUIDELINE FOR EM 50 FN Munters euroemme S.p.. Strada Piani, I-807 Chiusavecchia (Imperia) - Italy Tel. +39 083 5 Fax +39 083 5333 http://www.munters.com e-mail:info@munterseuroemme.it
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
UNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
4 in 1 Strength Station
Revision 0 September 2010 4 in 1 Strength Station Owner s Manual Record Serial Number Here Platinum by Tunturi www.tunturi.com Date www.tunturi.com of Purchase 4 in 1 Strength Station Owner s Manual Instructions
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
CutMaster 102. 6.04 Major External Replacement Parts
CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
Labotek Spare Partlist
Spare Partlist LT-number...: R-020.00.A Indholdsfortegnelse Go to R-020.01.A Hoved dele Go to R-020.02.A Styring, detaljer Go to R-020.03.A Styring, detaljer Go to R-020.04.A Beholder detaljer Go to R-020.05.A
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
FROM THE FRAME UP Catalog Items
7 Carburetor CA Carburetors 7 Carburetor Tech Tips Parts Illustration & Factory Carb See: Web/TechTips/Carb/AUC429 SU Factory Spec Sheet Tech Tips Specs 7 Carburetor Carb Sets Complete 7 Carburetor CA010