Inhaltsverzeichnis / Table of Contents
|
|
|
- Clement Blake
- 7 years ago
- Views:
Transcription
1 Module Catalogue for the Master s Degree Course Master in Textile Engineering, (M.Sc.) Focus on coursework and focus on research Modulkatalog für den Masterstudiengang Master in Textile Engineering, (M.Sc.) Schwerpunktrichtung Coursework und Schwerpunktrichtung Research Anlage 1 - Modulkatalog Dieser Modulkatalog gibt den aktuellen Stand gemäß dem Tag der Beschlussfassung der Prüfungsordnung wieder. Die vollständigen aktuellen Modulinhalte können aus dem Modulhandbuch des Studienganges entnommen werden. Die Modulhandbücher können hier: oder über den QR-Code abgerufen werden. Appendix 1 - Module Catalogue This module catalogue provides the current status on the day the decision on the examination regulations was made; The complete and current module contents can be seen in the module handbook of the programme. The module handbooks can requested online under or through the QR- Code above. 1
2 Inhaltsverzeichnis / Table of Contents Compulsory Course - First (Winter Semester)... 3 Module: Control Engineering... 3 Module: Machine Design Process... 4 Module: Gear and Transmission Technology... 5 Module: Finite Element Methods for Engineers... 6 Module: Quality Management... 7 Module: Minor Research Project... 8 Module: First Research Project... 9 Compulsory Course - Second (Summer Semester) Module: Fluid Dynamics Module: High Performance Fibres Module: Composites Module: Second Research Project Engineering Electives - Second (Summer Semester) Module: Faserstoffe 1 (natural fibres) Module: Textiltechnik 3 (fabrics, finishing) Module: Innovation Management Module: Computational Fluid Dynamics I Module: Production Metrology Module: Factory Planning Module: Failure of Structures and Structural Elements Module: Ausgewählte Themen der Textiltechnik Module: Finite Element Methods in Lightweight Design Module: Nonlinear Structural Mechanics Engineering Electives -Third (Winter Semester) Module: Practical Introduction to FEM Software I Module: Numerical Methods in Mechanical Engineering Module: Computational Fluid Dynamics II Module: Technische Textilien (technical textiles) Module: Faserstoffe 2 (synthetic fibres) Module: Textiltechnik 2 (yarns) Module: Modellbildung und Simulation in der Textiltechnik Module: Fundamentals of Lightweight Design Third (Winter Semester) Module: Master Thesis
3 Compulsory Course - First (Winter Semester) Module: Control Engineering MODULE TITLE: Control Engineering MODULTITEL: Control Engineering 1 4 Control Engineering Compulsory Courses Control Engineering Compulsory Courses Exercise (Übung): Control Engineering Compulsory Courses Basic knowledge in mathematics as defined in the examination regulations. Control Engineering The module grading is weighted according to the allocation Oral Exam (mündliche Prüfung) 3
4 Module: Machine Design Process MODULE TITLE: Machine Design Process MODULTITEL: Machine Design Process 1 5 Machine Design Process Compulsory Courses Machine Design Process Compulsory Courses Exercise (Übung): Machine Design Process Compulsory Courses Machine Design Process The module grading is weighted according to the allocation Oral Exam (mündliche Prüfung) 4
5 Module: Gear and Transmission Technology MODULE TITLE: Gear and Transmission Technology MODULTITEL: Gear and Transmission Technology 1 6 Gear and Transmission Technology Gear and Transmission Technology Exercise (Übung): Gear and Transmission Technology Compulsory Courses Compulsory Courses Compulsory Courses Gear and Transmission Technology The module grading is weighted according to the allocation Oral Exam (mündliche Prüfung) 5
6 Module: Finite Element Methods for Engineers MODULE TITLE: Finite Element Methods for Engineers MODULTITEL: Finite Element Methods for Engineers 1 5 Finite Element Methods for Engineers Finite Element Methods for Engineers Exercise (Übung): Finite Element Methods for Engineers Compulsory Courses Compulsory Courses Compulsory Courses Finite Element Methods for Engineers The module grading is weighted according to the allocation Oral Exam (mündliche Prüfung) 6
7 Module: Quality Management MODULE TITLE: QUALITY MANAGEMENT MODULTITEL: QUALITY MANAGEMENT 1 6 Quality Management Quality Management Exercise (Übung): Quality Management Compulsory Courses Compulsory Courses Compulsory Courses Quality Management The module grading is weighted according to the allocation Oral Exam (mündliche Prüfung) 7
8 Module: Minor Research Project MODULE TITLE: Minor Research Project MODULTITEL: Minor Research Project 1 5 Selfstudy Selbststudium Minor Research Project Independent project work (Selbstständige Projektarbeit): Minor Research Project Compulsory Courses Compulsory Courses h Exercise (Übung): Minor Research Project Compulsory Courses Minor Research Project The module grading is weighted according to the allocation Report (80 %) Oral presentation (20 %) 8
9 Module: First Research Project MODULE TITLE: First Research Project MODULTITEL: First Research Project 1 14 Selfstudy Selbststudium First Research Project Compulsory Courses Independent project work (Selbstständige Projektarbeit): First Research Project Compulsory Courses h Exercise (Übung): First Research Project Compulsory Courses First Research Project The module grading is weighted according to the allocation Report (80 %) Oral presentation (20 %) 9
10 Compulsory Course - Second (Summer Semester) Module: Fluid Dynamics MODULE TITLE: Fluid Dynamics MODULTITEL: Fluid Dynamics 2 5 Fluid Dynamics Compulsory Courses Fluid Dynamics Compulsory Courses Exercise (Übung): Fluid Dynamics Compulsory Courses Fluid Dynamics The module grading is weighted according to the allocation 10
11 Module: High Performance Fibres MODULE TITLE: High Performance Fibres MODULTITEL: High Performance Fibres 2 6 High Performance Fibres Compulsory Courses High Performance Fibres Compulsory Courses Exercise (Übung): High Performance Fibres Compulsory Courses Basic knowledge in polymer science High Performance Fibres The module grading is weighted according to the allocation 11
12 Module: Composites MODULE TITLE: Composites MODULTITEL: Composites 2 6 Composites Compulsory Courses Composites Compulsory Courses Exercise (Übung): Composites Compulsory Courses Basic knowledge in textile materials and processing Composites The module grading is weighted according to the allocation 12
13 Module: Second Research Project MODULE TITLE: Second Research Project MODULTITEL: Second Research Project 2 14 Selfstudy Selbststudium Second Research Project Independent project work (Selbstständige Projektarbeit): Second Research Project Compulsory Courses Compulsory Courses h Exercise (Übung): Second Research Project Compulsory Courses Second Research Project The module grading is weighted according to the allocation Report (80 %) Oral presentation (20 %) 13
14 Engineering Electives - Second (Summer Semester) Module: Faserstoffe 1 (natural fibres) MODULE TITLE: Faserstoffe 1 (natural fibres) MODULTITEL: Faserstoffe 1 (natural fibres) 2 3 German Deutsch Faserstoffe 1 (natural fibres) Faserstoffe 1 (natural fibres) Elective Courses Elective Courses Faserstoffe 1 (natural fibres) The module grading is weighted according to the allocation 14
15 Module: Textiltechnik 3 (fabrics, finishing) MODULE TITLE: Textiltechnik 3 (fabrics, finishing) MODULTITEL: Textiltechnik 3 (fabrics, finishing) 2 6 German Deutsch Textiltechnik 3 (fabrics, finishing) Textiltechnik 3 (fabrics, finishing) Exercise (Übung): Textiltechnik 3 (fabrics, finishing) Basic knowledge in textile processing. Elective Courses Elective Courses Elective Courses Textiltechnik 3 (fabrics, finishing) The module grading is weighted according to the allocation 15
16 Module: Innovation Management MODULE TITLE: Innovation Management MODULTITEL: Innovation Management 2 5 Innovation Management Innovation Management Exercise (Übung): Innovation Management Elective Courses Elective Courses Elective Courses Innovation Management Oral participation and case discussion (50%) Written exam (case study) (50%) 16
17 Module: Computational Fluid Dynamics I MODULE TITLE: Computational Fluid Dynamics I MODULTITEL: Computational Fluid Dynamics I 2 4 Computational Fluid Dynamics I Computational Fluid Dynamics I Exercise (Übung): Computational Fluid Dynamics I Elective Courses Elective Courses Elective Courses Computational Fluid Dynamics I The module grading is weighted according to the allocation 17
18 Module: Production Metrology MODULE TITLE: Production Metrology MODULTITEL: Production Metrology 2 5 Production Metrology Elective Courses Production Metrology Elective Courses Exercise (Übung): Production Metrology Elective Courses Production Metrology The module grading is weighted according to the allocation 18
19 Module: Factory Planning MODULE TITLE: Factory Planning MODULTITEL: Factory Planning 2 6 Factory Planning Elective Courses Factory Planning Elective Courses Exercise (Übung): Factory Planning Elective Courses Factory Planning The module grading is weighted according to the allocation 19
20 Module: Failure of Structures and Structural Elements MODULE TITLE: Failure of Structures and Structural Elements MODULTITEL: Failure of Structures and Structural Elements 2 5 Failure of Structures and Structural Elements Failure of Structures and Structural Elements Exercise (Übung): Failure of Structures and Structural Elements Elective Courses Elective Courses Elective Courses Failure of Structures and Structural Elements The module grading is weighted according to the allocation 20
21 Module: Ausgewählte Themen der Textiltechnik MODULE TITLE: Ausgewählte Themen der Textiltechnik MODULTITEL: Ausgewählte Themen der Textiltechnik 2 6 German Deutsch Ausgewählte Themen der Textiltechnik Ausgewählte Themen der Textiltechnik Exercise (Übung): Ausgewählte Themen der Textiltechnik Recommended Textiltechnik I, II, III Technische Textilien Elective Courses Elective Courses Elective Courses Factory Planning The module grading is weighted according to the allocation 21
22 Module: Finite Element Methods in Lightweight Design MODULE TITLE: Finite Element Methods in Lightweight Design MODULTITEL: Finite Element Methods in Lightweight Design 2 5 Finite Element Methods in Lightweight Design Finite Element Methods in Lightweight Design Exercise (Übung): Finite Element Methods in Lightweight Design Elective Courses Elective Courses Elective Courses Finite Element Methods in Lightweight Design The module grading is weighted according to the allocation 22
23 Module: Nonlinear Structural Mechanics MODULE TITLE: Nonlinear Structural Mechanics MODULTITEL: Nonlinear Structural Mechanics 2 5 Nonlinear Structural Mechanics Nonlinear Structural Mechanics Exercise (Übung): Nonlinear Structural Mechanics Elective Courses Elective Courses Elective Courses Nonlinear Structural Mechanics The module grading is weighted according to the allocation 23
24 Engineering Electives -Third (Winter Semester) Module: Practical Introduction to FEM Software I MODULE TITLE: Practical Introduction to FEM Software I MODULTITEL: Practical Introduction to FEM Software I 3 3 Practical Introduction to FEM Software I Practical Introduction to FEM Software I Exercise (Übung): Practical Introduction to FEM Software I Elective Courses Elective Courses Elective Courses Practical Introduction to FEM Software I The module grading is weighted according to the allocation 24
25 Module: Numerical Methods in Mechanical Engineering MODULE TITLE: Numerical Methods in Mechanical Engineering MODULTITEL: Numerical Methods in Mechanical Engineering I 3 7 Numerical Methods in Mechanical Engineering Numerical Methods in Mechanical Engineering Exercise (Übung): Numerical Methods in Mechanical Engineering Elective Courses Elective Courses Elective Courses Numerical Methods in Mechanical Engineering The module grading is weighted according to the allocation 25
26 Module: Computational Fluid Dynamics II MODULE TITLE: Computational Fluid Dynamics II MODULTITEL: Computational Fluid Dynamics II 3 3 Computational Fluid Dynamics II Computational Fluid Dynamics II Exercise (Übung): Computational Fluid Dynamics II Elective Courses Elective Courses Elective Courses Computational Fluid Dynamics II The module grading is weighted according to the allocation 26
27 Module: Technische Textilien (technical textiles) MODULE TITLE: Technische Textilien (technical textiles) MODULTITEL: Technische Textilien (technical textiles) 3 6 German Deutsch Technische Textilien (technical textiles) Technische Textilien (technical textiles) Exercise (Übung): Technische Textilien (technical textiles) - Basic knowledge in textile processing.- Elective Courses Elective Courses Elective Courses Technische Textilien (technical textiles) The module grading is weighted according to the allocation 27
28 Module: Faserstoffe 2 (synthetic fibres) MODULE TITLE: Faserstoffe 2 (synthetic fibres) MODULTITEL: Faserstoffe 2 (synthetic fibres) 3 3 German Deutsch Faserstoffe 2 (syntheticfibres) Faserstoffe 2 (syntheticfibres) Elective Courses Elective Courses Faserstoffe 2 (synthetic fibres) The module grading is weighted according to the allocation 28
29 Module: Textiltechnik 2 (yarns) MODULE TITLE: Textiltechnik 2 (yarns) MODULTITEL: Textiltechnik 2 (yarns) 3 6 German Deutsch Textiltechnik 2 (yarns) Elective Courses Textiltechnik 2 (yarns) Elective Courses Exercise (Übung): Textiltechnik 2 (yarns) Elective Courses Basic knowledge in textile processing.- Textiltechnik 2 (yarns) The module grading is weighted according to the allocation 29
30 Module: Modellbildung und Simulation in der Textiltechnik MODULE TITLE: Modellbildung und Simulation in der Textiltechnik MODULTITEL: Modellbildung und Simulation in der Textiltechnik 3 6 German Deutsch Modellbildung und Simulation in der Textiltechnik Modellbildung und Simulation in der Textiltechnik Exercise (Übung): Modellbildung und Simulation in der Textiltechnik - Basic knowledge in textile processing.- Elective Courses Elective Courses Elective Courses Modellbildung und Simulation in der Textiltechnik The module grading is weighted according to the allocation 30
31 Module: Fundamentals of Lightweight Design MODULE TITLE: Fundamentals of Lightweight Design MODULTITEL: Fundamentals of Lightweight Design 3 4 Fundamentals of Lightweight Design Fundamentals of Lightweight Design Exercise (Übung): Fundamentals of Lightweight Design Elective Courses Elective Courses Elective Courses Fundamentals of Lightweight Design The module grading is weighted according to the allocation 31
32 Third (Winter Semester) Module: Master Thesis MODULE TITLE: MASTER THESIS MODULTITEL: Master Thesis 3 20 / Deutsch German Master Thesis (Masterarbeit): Master Thesis Kolloquium (Masterarbeitskolloquium): 80 Pages 80 Seiten Min. 0 32
Appendix 1 - Module Catalogue. Anlage 1 - Modulkatalog. Table of Contents Inhaltsverzeichnis
Module Catalogue for the Master s Course Management and Engineering in Production Systems Course, (M.Sc.) Modulkatalog für Management and Engineering in Production Systems, (M.Sc.) August 2013 Appendix
General description of degree program
General description of degree program Name Qualification awarded Level of qualification Qualification requirements and regulations Key learning outcomes Profile of the program Occupational profiles of
Welcome in the Master programme
Welcome in the Master programme Prof. Axel Görlitz, HHU Düsseldorf 19.10.2015 Master Programme in Physics Physics Focus (Schwerpunkt) Plasma Physics, Quantum Optics and Quantum Information, Solid State
Master of Engineering Program in Industrial Engineering (Updated 2012) Faculty of Engineering Ubon Ratchathani University
1 Master of Engineering Program in Industrial Engineering (Updated 2012) Faculty of Engineering Ubon Ratchathani University General Information about the program Program Code : 021 Program Name : Master
Study Modules taught in English and Language Courses (Bachelor)
Study s taught in English and Language s (Bachelor) # WS = winter semester/semester 1 = 15 September to 14 February, SS = summer semester/semester = 1 March to 31 July, WS/SS = winter and summer semester
STUDY GUIDE: MASTER S DEGREE IN ECONOMIC POLICY
STUDY GUIDE: MASTER S DEGREE IN ECONOMIC POLICY This study guide informs you about the rules and policies for the Master s program in Economic Policy. It is based on the official examination regulations
Business Administration and Engineering
General description of degree program Name Qualification awarded Level of qualification Qualification requirements and regulations Key learning outcomes Profile of the program Occupational profiles of
The Executive Board of the Zurich University of Applied Sciences,
Translation of Academic Regulations for the Bachelor s Degree Programs in Business Administration and Business Law at the Zurich University of Applied Sciences Angewandte Wissenschaften. It was prepared
Examination Regulations
Examination Regulations Master s Programs Michael Ritter Technische Universität München October 9th, 2015 Master s Programs Anja Hoffmann studium.ma.tum.de master@ma.tum.de Michael Ritter Study Advisors
Purpose of the Study and Examination Regulations
Explanation of the Study and Examination Regulations for the Master's Degree Program in Lightweight Construction and Composite Technology at the Augsburg University of Applied Sciences Fachhochschule Augsburg
Module Handbook for the Masters program in General Linguistics at the University of Bamberg
1 Otto-Friedrich-Universität Bamberg Humanities Faculty Department of General Linguistics http://www.uni-bamberg.de/aspra Module Handbook for the Masters program in General Linguistics at the University
Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)
Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box 3900 30100, Eldoret, Kenya Tel: (053) 43170;
Special Provisions to the Examination Regulations for the course. International Master of Science in Electrical Engineering and Information Technology
Special Provisions to the Examination Regulations for the course International Master of Science in Electrical Engineering and Information Technology of the Faculty of Electrical Engineering and Information
Module Handbook Master Program Computer Engineering
Module Handbook Master Program Computer Engineering Faculty for Electrical Engineering, Computer Science and Mathematics University of Paderborn Version: November 26, 2013 1 Contents 1 Preliminaries 6
Online Exam Registration
Online Exam Registration Since the summer term 2014, the Department of English and American Studies uses an online exam registration process via TAN. If you have not received your TAN list during the orientation
Agreement on. Dual Degree Master Program in Computer Science KAIST. Technische Universität Berlin
Agreement on Dual Degree Master Program in Computer Science between KAIST Department of Computer Science and Technische Universität Berlin Fakultät für Elektrotechnik und Informatik (Fakultät IV) 1 1 Subject
Curriculum Master Course in Computational Engineering, Branch 1 of Study (start in winter semester) Stand: 11.12.2007 (dh)
Curriculum Master Course in Computational Engineering, Branch 1 of Study (start in winter semester) Stand: 11.12.2007 (dh) Mandatory modules Fach / Module Applied Mathematics I Introduction to Numerical
and teaching. It qualifies them for higher level careers in the public sector.
Statute of the Department Mechanical Engineering and Business Administration of Lübeck University of Applied Sciences about the continuative study program Master Mechanical Engineering (Study Regulations
Agreement on Dual Degree Master Program in Computer Engineering. Politechnika Warszawska Faculty of Electronics and Information Technology
Agreement on Dual Degree Master Program in Computer Engineering between Politechnika Warszawska Faculty of Electronics and Information Technology and Technische Universität Berlin School of Electrical
Inhaltsverzeichnis. Appendix 1 - Module Catalogue. Table of Contents
Module Catalogue for the Master s Course Management and Engineering in Production Systems Course, (M.Sc.) Modulkatalog für Management and Engineering in Production Systems, (M.Sc.) Appendix 1 - Module
4.1. Title: data analysis (systems analysis). 4.2. Annotation of educational discipline: educational discipline includes in itself the mastery of the
4.1. Title: data analysis (systems analysis). 4.4. Term of study: 7th semester. 4.1. Title: data analysis (applied mathematics). 4.4. Term of study: 6th semester. 4.1. Title: data analysis (computer science).
Profile description - Accounting & Finance
Profile description - & Finance Enclosure to the curriculum for Master of Science in Economics and Business Administration 1 of 9 This profile description is an enclosure to the curriculum for the Master
Chemistry. Master of Science ETH Study guide D CHAB
Chemistry Master of Science ETH Study guide D CHAB Master of Science ETH Chemistry Study guide The legal basis for this programme is the «Studienreglement 2005, Ausgabe 08.04.2013-4, für den Master-Studiengang
M. E. Degree in Energy Systems Engineering. Student Handbook
College of Engineering & Informatics Energy Systems Engineering Programme M. E. Degree in Energy Systems Engineering Student Handbook 1 st July 2015 1 TABLE OF CONTENTS 1. GENERAL INFORMATION... 3 2. ENTRY
Agreement on Dual Degree Master Program in Computer Science. Politechnika Warszawska. Technische Universität Berlin
Agreement on Dual Degree Master Program in Computer Science between Politechnika Warszawska Faculty of Electronics and Information Technology and Technische Universität Berlin School of Electrical Engineering
Artikel I Änderung der Studienordnung In der Anlage zur Studienordnung wird Punkt 2 wie folgt neu gefasst:
413 Änderungssatzung für die Studien- und Prüfungsordnung für den Double-Degree-Masterstudiengang ICT Innovation an der Technischen Universität Berlin Vom 23. Juli 2014 Der Fakultätsrat der Fakultät IV
Earth System Science. Curriculum. Master of Science
Contact University of Hohenheim Study Counselling Prof. Dr. Volker Wulfmeyer Dr. Andreas Behrendt 70593 Stuttgart Germany Phone +49 (0)711 459-22313 counselling-ess@uni-hohenheim.de www.uni-hohenheim.de/ess
Wood Technology and Management
Universität für Bodenkultur Wien University of Natural Resources and Life Sciences, Vienna Curriculum for the Master s Programme in Wood Technology and Management Programme classification no. 066 426 Effective
Profile Description - International Business & Marketing
Profile Description - International Business & Marketing Enclosure to the curriculum for Master of Science in Economics and Business Administration 1 of 9 This profile description is an enclosure to the
How To Pass A Master Degree In Germany
Technische Universität Berlin OFFICIAL GAZETTE Publisher: The President of the Technische Universität Berlin No. 2/2015 Straße des 17. Juni 135, 10623 Berlin, Germany (volume 68) ISSN 0172-4924 Berlin
Course scheme of the bachelor and master degree programme of Sales Engineering and Product Management at the RUHR-UNIVERSITÄT BOCHUM
RUHR-UNIVERSITÄT BOCHUM Course scheme of the bachelor and master degree programme of Sales Engineering and Product Management at the RUHR-UNIVERSITÄT BOCHUM valid from WS 09/10 Modul Modul-description
Published in German language in the official bulletin ( Amtliche Bekanntmachungen ) of Ulm University, No. 6 of 16 march 2015, p.
Published in German language in the official bulletin ( Amtliche Bekanntmachungen ) of Ulm University, No. 6 of 16 march 2015, p.27-32 Subject-specific Study and Examination Regulations for the Master
Master of Science (version of 15th December 2004)
Course Regulations for the Masters degree programme in Geodesy and Geoinformation Science at Faculty VI (Civil Engineering and Applied Earth Sciences) of the Technical University of Berlin leading to the
College of Engineering Mechanical Engineering Depart. rtment. Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies
Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies College of Engineering Mechanical Engineering Depart rtment Master of Science in Mechanical Engineering Mechanical
Translation of the Fachprüfungsordnung Biologische Ozeanographie only the German version is legally binding! -
Translation of the Fachprüfungsordnung Biologische Ozeanographie only the German version is legally binding! - Regulations for Qualifying Examinations (Ordinance) for the Faculty of Mathematics and Natural
Inhaltsverzeichnis. Appendix 1 - Module Catalogue. Anlage 1 - Modulkatalog
Module Catalogue for the Master s Course Management and Engineering in Production Systems Course, (M.Sc.) Modulkatalog für Management and Engineering in Production Systems, (M.Sc.) Appendix 1 - Module
This is an English translation only. The original German version is the legally binding document.
To the Programme Regulations 2006 of the Master s Degree Programme in Civil Engineering 31 August 2010 (Version: 1 November 2014) Applies to students who commence or re-enter the degree programme in Autumn
Stipendienprogramm der Provinz Zhejiang mit dem Land Schleswig-Holstein
附 件 2: 浙 江 省 与 德 国 石 荷 州 奖 学 金 项 目 ---- 高 校 专 业 目 录 及 联 系 人 信 息 (2015/2016 年 ) Stipendienprogramm der Provinz Zhejiang mit dem Land Schleswig-Holstein Anlage der Ausschreibung: Auswahlkatalog der Hochschulen
Master Embedded Systems Engineering
Master Embedded Systems Engineering Prof. Dr. Thomas Stieglitz Faculty of Engineering October 16th, 2014 Overview Our Faculty of Engineering Embedded Systems as a study course The Master study program
How To Get A Degree In Swissitzerland
Study and Examination Regulations governing the Bachelor of Science in Business Administration, Business Administration (International Management), Business Information Technology Translation and adaptation
[LOGO] Dated: December 10, 2013
![[LOGO] Dated: December 10, 2013](/thumbs/23/2001131.jpg "[LOGO] Dated: December 10, 2013")
The following document is the English translation of the German Program and Exam Regulations for the Bachelor in International Business. It serves the purpose of giving international students the opportunity
STUDY GUIDE: Master in International Economics and Public Policy (MIEPP)
STUDY GUIDE: Master in International Economics and Public Policy (MIEPP) This version: April 14, 2015 This study guide informs you about the rules and policies for the Master s program in International
These Programme Regulations apply to all Master of Science degree programmes offered by the FHNW School of Business.
Regulations governing the master's degree programmes in Business Information Systems and International Management at the FHNW School of Business, part of the University of Applied Sciences Northwestern
Information for Exchange Students
Information for Exchange Students Index I) Course Choice and Course Registration Eligible courses at RWTH Aachen University...4 Courses offered by the Faculty of Mechanical Engineering...4 English-taught
Contents. I. Joint regulations 1 Applicability 2 Academic degrees; orientation 3 Standard term and scope of study 4 Board of examiners
Examination Rules and Regulations for the Consecutive Master s Degree Program in Global Political Economy, Faculty of Social Sciences, University of Kassel, 10th February 2010 Contents I. Joint regulations
3. DURATION: 4 semesters full-time (54 hours weekly)
1. COURSE: MA BRITISH STUDIES 2. DEGREE AWARDED: Master of Arts 3. DURATION: 4 semesters full-time (54 hours weekly) CREDIT POINTS: 120 START DATE: every winter semester 4. ENTRY REQUIREMENTS The prerequisite
APPLICATION FOR ADMISSION (For further information please visit our web site www.hs-kl.de/fachbereiche/bw/studiengaenge/master-studiengaenge)
APPLICATION FOR ADMISSION (For further information please visit our web site www.hs-kl.de/fachbereiche/bw/studiengaenge/master-studiengaenge) MASTER International Management and Finance Form for admission
Orientation for international Master's degree students
Orientation for international Master's degree students Pirjo Moen Coordinator of the Master's degree programmes in Computer Science Department of Computer Science Faculty of Science Outline Master's degree
Study regulations for the master s degree program in Energy Engineering at Technische Universität Berlin in El Gouna, Egypt Date: March 27, 2009
Study regulations for the master s degree program in Energy Engineering at Technische Universität Berlin in El Gouna, Egypt Date: March 27, 2009 The Gemeinsame Kommission mit Entscheidungsbefugnis (Joint
Rules & Regulations*
Graduate School of Business University of Zurich PhD programs in Business Administration and Management & Economics Rules & Regulations*. 1. Admission to the PhD Programs in Business Studies and Management
Appendix: Curriculum for Double Degree Agreement between Wuhan University (WHU) and the Technische Universität München (TUM)
Appendix: Curriculum for Double Degree Agreement between (WHU) and the Technische Universität München (TUM) Master s program: - Schools of Resources and Environmental Science - School of Urban Design -
1 Guidelines of the Specialized Master of Science in Geography (MSc)
1 Guidelines of the Specialized Master of Science in Geography (MSc) 1.1 General information The Master of Science in Geography is the specialized degree, allowing an individual specialization in geography.
Profile Description - Management Accounting
Profile Description - Management Enclosure to the curriculum for Master of Science in Economics and Business Administration 1 of 9 This profile description is an enclosure to the curriculum for the Master
Curriculum for the Master Programme in Manufacturing Technology
Curriculum for the Master Programme in Manufacturing Technology Studieordning for kandidatuddannelsen i virksomhedsteknologi The Faculties of Engineering, Science and Medicine Aalborg University 2010 0
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer (MPT) (in English) 6_MS_ManagPolymerTech_Curr Seite 1 von 12 Inkrafttreten: 1. 10. 2015 Table of Contents 1 Qualification Profile...3 2 Admissions...4
Course Catalogue. Masters Programme Human-Computer Interaction (MINF-M-120-MCI) 120 credit points
Course Catalogue Masters Programme Human-Computer Interaction (MINF-M-120-MCI) 120 credit points According to the Examination Regulations from 25.09.2012 Version(2014/12/18) 1 About the Programme of Studies
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer Technologies (MPT) (in English) 4_MS_ManagementPolymerTechnologies_Curr Seite 1 von 10 Inkrafttreten: 1. 10. 2013 Table of Contents 1 Qualification Profile...3
Information and Library
Information and Library Services Programme: Information and Library Services Faculty Design, Media and Information Department of Information Degree: Bachelor of Arts (B.A.) 1 Where will graduates of the
Programme Specification (Postgraduate) Date amended: 25 th March 2015
Programme Specification (Postgraduate) Date amended: 25 th March 2015 1. Programme Title(s): MSc/PGDip in Advanced Engineering with Management MSc in Advanced Engineering with Management and Industry Engineering
Winter Term 2012. Welcome to the Master of Science in Information Systems
Welcome to the Master of Science in Information Systems Winter Term 2012 Agenda Contact Sources of Information Examination Regulations PIN/TAN-Codes Discussion 1 Examination Office (PAM) Organizes the
Module Handbook Civil Engineering (M.Sc.)
Module Handbook Winter Term 2015/2016 Short version Date: 14.09.2015 Department of Civil Engineering, Geo- and Environmental Sciences KIT - University of the State of Baden-Wuerttemberg and National Research
Consolidated version with colour-coded markings regarding entry into effect based on the 2nd bylaws amendment of 23rd January 2012.
Study and Examination Regulations for the Master's Degree Programme in International Business and Finance at the Augsburg University of Applied Sciences - Fachhochschule Augsburg - of 23rd January 2008
Profile Description - International Business & Marketing
Profile Description - International Business & Marketing Enclosure to the curriculum for Master of Science in Economics and Business Administration Odense 2015, sept. 1 of 9 This profile description is
Master of Science in International Economics and Public Policy (MIEPP) Summer semester 2012 Johannes Gutenberg-University Mainz
Master of Science in International Economics and Public Policy (MIEPP) Summer semester 2012 Johannes Gutenberg-University Mainz Master of Science in International Economics and Public Policy (MIEPP) Information
M.Sc. Computer Science Information about the degree programme
Academic Advice Service Faculty of Computer Science and Mathematics M.Sc. Computer Science Information about the degree programme For more information, visit www.uni-passau.de/en/msc-computer-science/
Module Catalogue Master s Programme: Biochemie (Master of Science, M.Sc.)
Module Catalogue Master s Programme: Biochemie (Master of Science, M.Sc.) (120 credits) Based on the Prüfungs- und Studienordnung of 1 January 2015 88/025/---/M0/H/2015 Issued on XX XXXXXXXXXX XXXX Index
MSc Business Analysis and Finance.
MSc Business Analysis and Finance Programme Specification Course Title MSc Business Analysis and Finance. Course Overview The MSc Business Analysis and Finance degree is a one-year full-time course for
M.Sc. Health Economics and Health Care Management
List of Courses M.Sc. Health Economics and Health Care Management METHODS... 2 QUANTITATIVE METHODS... 2 ADVANCED ECONOMETRICS... 3 MICROECONOMICS... 4 DECISION THEORY... 5 INTRODUCTION TO CSR: FUNDAMENTALS
LEARNING AGREEMENT FOR STUDIES
LEARNING AGREEMENT FOR STUDIES The Student Last name (s) First name (s) Date of birth Nationality 1 Sex [M/F] Academic year 20../20.. Study cycle 2 EQF level 6 (Bachelor) oder 7 (Master) Phone Subject
Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements
Curriculum Structure for Master of Engineering in Mechanical Engineering Degree Program (2013) Chiang Mai University Plan A1 Degree Requirements Total: 36 credits Curriculum Structure: A. Thesis 36 credits
MSc Economics Programme Specification. Course Title MSc Economics.
MSc Economics Programme Specification Course Overview Course Title MSc Economics. The MSc Economics degree is a one-year full-time course. It provides a foundation in modern techniques of quantitative
Petroleum Engineering - Master of Science Degree Programme
Studieprogram M-PETENG, ENGELSK, 2014 HØST, versjon 31-May-2015 23:46:36 Petroleum Engineering - Master of Science Degree Programme Credits: 120 credits Level: Master's degree (2 years) Offered by: Faculty
Programme Advising. Associate Degree in Paralegal Studies Programme: Academic Year 2014/2015
Programme Advising Associate Degree in Paralegal Studies Programme: Academic Year 014/015 Associate Degree in Paralegal Studies (PALS) Programme Advising for Academic Year 014/015 ADVICE: For the working
Information for international applicants (master's degrees)
Campus Center Alsterterrasse 1, 20354 Hamburg, Germany www.uni-hamburg.de/campuscenter Information for international applicants (master's degrees) Thank you for your interest in studying at Universität
Master of Arts programme Roads to Democracy(ies) - General Information, Modules and Study Plan -
Master of Arts programme Roads to Democracy(ies) - General Information, Modules and Study Plan - (April 2011) General Information about the Study Programme Roads to Democracy(ies) is a research-oriented,
General description of degree program
General description of degree program Name of degree program: Mechanical Engineering Degree awarded: Specialization: Bachelor of Engineering (B.Eng.) Option of taking the Franco-German study program in
Double Degree Study Programs - Information Sheet for Incomings
Peter Winandy Double Degree Study Programs - Information Sheet for Incomings Study year 2016/2017 The following information sheet provides information to incoming student candidates for the T.I.M.E. double
How To Get A Masters Degree In Management At University Of Bromford
Faculty of Management and Law Programme Specification Programme title: Master of Science in Finance, Accounting and Management Academic Year: 2015-2016 Degree Awarding Body: Final and interim award(s):
Software Systems Engineering
Software Systems Engineering Introductory Meeting WS 2011/2012 Prof. Gerhard Lakemeyer, Ph.D. Dipl.-Inform. Stefan Schiffer, Patrick Selders RWTH Aachen University Knowledge-Based Systems Group (Lehr-
Programme Specification and Curriculum Map for MSc Design Engineering and Manufacturing Management
Programme Specification and Curriculum Map for MSc Design Engineering and Manufacturing Management 1. Programme title Design Engineering and Manufacturing Management 2. Awarding institution Middlesex University
Master Industrial Engineering Energy and Environmental Resources
Hochschule für Wirtschaft und Recht Berlin Berlin School of Economics and Law Department of Business and Economics Master Industrial Engineering Energy and Environmental Resources in cooparation with Industrial
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer (MPT) (in English) 5_MS_ManagemantPolymerTechnologie_Curr Seite 1 von 11 Inkrafttreten: 1. 10. 2014 Table of Contents 1 Qualification Profile...3 2 Admissions...4
Subject-Specific Provisions for the Study Programme FOKUS Life Sciences with the Degree Master of Science (Acquisition of 120 ECTS Points)
Subject-Specific Provisions for the Study Programme FOKUS Life Sciences with the Degree Master of Science (Acquisition of 20 ECTS Points) at the Julius Maximilian University of Würzburg Adopted on 5 July
These Programme Regulations apply to all Master of Science degree programmes offered by the FHNW School of Business.
Regulations governing the master's degree programmes in Business Information Systems and International Management at the FHNW School of Business, part of the University of Applied Sciences Northwestern
Faculty of Economics, Business Administration and Information Technology
Faculty of Economics, Business Administration and Information Technology This document is a translation only. It is solely for information purposes and has no legal validity. For any case of legal proceedings
Contact. Faculty of Natural Sciences and Technology
Contact HAWK Faculty of Natural Sciences and Technology Von-Ossietzky-Straße 99 D-37085 Göttingen Telephone: +49(0)5 51/37 05-151 Internet: http://natec.hawk-hhg.de for international Information study
of 16 th November 2006
1 (including the changes of October 2007 and November 2008) Examination and Study Regulations for the Bachelor of Engineering degree programme Information Engineering at the Department of Information and
This is an English translation only. The original German version is the legally binding document.
To the Programme Regulations 2009 of the Master s Degree Programme in Computer Science 12 July 2010 (Version 1 November 2011) Applies to students who commence the degree programme in Autumn Semester 2011
Examination form. 20% individual examination paper TT
Senate Resolution of 3 November 2009 12 Degree Course Scheme, Master of Arts in Quantitative Economics and Finance (MiQE/F) Course Regulations 10 (CR10) (pursuant to Art. 6 of the Course Regulations for
SeIT_SINCE 1848. Studies in INTERNATIONAL BUSINESS ADMINISTRATION
SeIT_SINCE 188 Studies in INTERNATIONAL BUSINESS ADMINISTRATION Fresenius University of Applied Sciences Our tradition your future Fresenius University of Applied Sciences Our tradition your future Fresenius
a. Table of contents Preliminary remarks on language use
Subject-specific Study and Examination Regulations for the English-language Master Programme in Communications Technology offered by the Faculty of Engineering and Computer Science of Ulm University of
Program Catalog. Master s degree: Biology (Master of Science, M.Sc.)
Program Catalog Master s degree: Biology (Master of Science, M.Sc.) (60 ECTS points) Based on the Examination Regulations from September 21, 2012 88/026/---/M1/H/2012 Version: May 1, 2013 Table of Contents
Master Programs in Economics. Winter Semester 2015
Master Programs in Economics Winter Semester 2015 Last Update: October 23, 2015 1. Overview 1.1 Master Programs The program MSc Economics is a general economics master program with interdisciplinary structure
Complete version from 1 October 2015 Curriculum for the Diploma Programme Business Law at the Faculty of Law of the University of Innsbruck
Note: The following curriculum is a consolidated version. It is legally non-binding and for informational purposes only. The legally binding versions are found in the respective issues of the University
Programme Advising. Associate Degree in Business Management Programme: Academic Year 2013/14
Programme Advising Associate Degree in Business Programme: Academic Year 013/14 Associate Degree in Business (BUMA) Programme Advising for Academic Year 013/14 ADVICE: For the working adult we recommend
leadership skills, and management skills are particular topics of focus in this regard.
Study regulations for the master s degree program in Water Engineering at Technische Universität Berlin in El Gouna, Egypt Date: March 27, 2009 The Gemeinsame Kommission mit Entscheidungsbefugnis (Joint
International Strategic Management
Examination Regulations for the Master s programme in International Strategic Management Project Development, Risk and Contract Management at the SRH University of Applied Sciences, Berlin as of 18 May
(Short) Overview + Information for Master Computer Science Four main research areas of Uni Bonn/Computer Science
(Short) Overview + Information for Master Computer Science Four main research areas of Uni Bonn/Computer Science In this masters program, a focus on one of these areas will be selected by the student Modules