TWO VALVE MANIFOLS Page 23

Size: px
Start display at page:

Download "TWO VALVE MANIFOLS Page 23"

Transcription

1 2050 Series TWO VALVE MANIFOLS Page 23 Two Valve Manifolds psi & This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels. F E FLOW Features Tee bar easy manoeuvrability with minimum effort PTFE packing standard, optional graphoil Stainless steel costruction as standard, optional: See material list Colour coded functional identification Externally adjustable gland Variety of end connections Dust cap to prevent contaminations on the operating thread Specifications Pressure up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from 73 C to +210 C ( -99 F / F ) Temperature rating GRAPHOIL packing from 54 C to C ( -65 F / F ) Standard orifice diameter 4.0 mm Standard 316L stainless steel Order code Connections Inlet Outlet A B C D E F Orifice Weight 2050CBABABAA 1/4 1/ Kg. 0, CDADABAA 1/2 1/ Kg Note: For 10,000 psi version change the first letter of the code ( usually C ) in D i.e. 2050DBABABAA Material of construction can be supplied to meet the requirements of NACE MR Rev

2

3 Page Series TWO TWO VALVE VALVE MANIFOLS Two Valve Manifolds psi & This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels. FLOW Features Tee bar easy manoeuvrability with minimum effort PTFE packing standard, optional graphoil Stainless steel costruction as standard, optional: See material list Colour coded functional identification Externally adjustable gland Variety of end connections Dust cap to prevent contaminations on the operating thread Specifications Pressure up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from 73 C to +210 C ( -99 F / F ) Temperature rating GRAPHOIL packing from 54 C to C ( -65 F / F ) Standard orifice diameter 4.0 mm Standard 316L stainless steel Order code Connections A B C D E F G H L Orifice Weight Inlet Outlet 2150CBAHHBAA 1/4 Flanged CDAHHBAA 1/2 Flanged Kg Kg Note: For 10,000 psi version change the first letter of the code ( usually C ) in D i.e. 2150DBAHHBAA Material of construction can be supplied to meet the requirements of NACE MR Included accessories: - Plug Rev

4

5 Page Series THREE VALVE MANIFOLS Three Valve Manifolds psi & psi The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand. FLOW Features Tee bar easy manoeuvrability with minimum effort PTFE packing standard, optional graphoil Stainless steel costruction as standard, optional: See material list Colour coded functional identification Externally adjustable gland Variety of end connections Dust cap to prevent contaminations on the operating thread Specifications Pressure up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from 73 C to +210 C ( -99 F / F ) Temperature rating GRAPHOIL packing from 54 C to C ( -65 F / F ) Standard orifice diameter 4.0 mm Standard 316L stainless steel Connections Order code A B C D E F G H L Orifice Inlet Outlet 3050CBAHHBAA 1/4 Flanged CDAHHBAA 1/2 Flanged Note: For 10,000 psi version change the first letter of the code ( usually C ) in D i.e. 3050DBAHHBAA Material of construction can be supplied to meet the requirements of NACE MR Weight Kg Kg Rev

6

7 Page 44 FIVE VALVE MANIFOLS 5050 Series L M Five Valve Manifolds psi & psi G D The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand. I H FLOW F C E B A Features Tee bar easy manoeuvrability with minimum effort PTFE packing standard, optional graphoil Stainless steel costruction as standard, optional: See material list Colour coded functional identification Externally adjustable gland Variety of end connections Dust cap to prevent contaminations on the operating thread Specifications Pressure up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from 73 C to +210 C ( -99 F / F ) Temperature rating GRAPHOIL packing from 54 C to C ( -65 F / F ) Standard orifice diameter 4.0 mm Standard 316L stainless steel Order code Connections A B C D E F G H I L M Orifice Weight Inlet Outlet 5050CBAHHBAA 1/4 Flanged Kg CDAHHBAA 1/2 Flanged Kg Note: For 10,000 psi version change the first letter of the code ( u sually C ) in D i.e. 5050DBAHHBAA Material of construction can be supplied to meet the requirements of NACE MR Included accessories: - Plugs Rev

8

9 Coding System Sami Instruments srl VERSION Bar stock needle valves Two-valve manifolds Three-valve manifolds Four-valve manifolds Five-valve valve manifolds OUTLET A 1/8 A NPT B 1/4 B BSPP C 3/8 C BSPT D 1/2 D S.W. E 3/4 E B.W. F Ø * F O.D. G 1 H Std. Sami H Flang. I IEC 61518/A I M20 L Special M IEC 61518/B N X 1,5 INLET A 1/8 A NPT B 1/4 B BSPP C 3/8 C BSPT D 1/2 D S.W. E 3/4 E B.W. G 1 H Std. Sami H Flang. I IEC 61518/A I M20 L Special M IEC 61518/B N X 1,5 RATING MATERIALS A Carbon Steel C50 B Aisi 316 L C Aisi 316 Ti D Duplex E Super Duplex F Monel 400 G Hastelloy C276 H Inconel 625 I Titanium M Brass N A350-LF2 O Incolloy 825 PACKING A B C D A B C PTFE Graphoil O-ring Viton O-ring NBR BONNET Std Bonnet Gas Solution Mini D O.S. & Y. A B C D 800 PSI 3,000 PSI 6,000 PSI 10,000 PSI C B A B A B A A 1000CBABABAA Page 5

10 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/11 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 3/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

11 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/08 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 5/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

12 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/04 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 8/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

13 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/07 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 9/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

14 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/04 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 18/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

15 SAMI BRACKET SYSTEM FOR MANIFOLD ON 2" NB PIPE PILLAR Bracket model: A0540/07 vertical horizontal CODICE ENTRATA USCITA MATERIALE TENUTA Code In Out Material Packing COD.: ACCESSORI INCLUSI Included Accessories A richiesta del cliente esecuzioni speciali di materiali, attacchi entrata/uscita, ecc. Special executions of materials, in/out connections, etc. are avaible on costumer's request DIS.: REV.: PAGINA: 19/23FILE: listino.dft SAMI INSTRUMENTS S.R.L. SI IMPEGNA A MIGLIORARE COSTANTEMENTE I PROPRI PRODOTTI E PERTANTO SI RISERVA IL DIRITTO DI MODIFICARE DATI, CARATTERISTICHE E PRESTAZIONI SENZA DARE ALCUN PREAVVISO SAMI INSTRUMENTS S.R.L. commits itself to constantly improve its products and therefore it reserves the right to modify data, features and performances without notice.

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control

HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model

More information

2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS

2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV

More information

310FR. Stainless steel AISI 316L filter regulator serie 10 for air, gas and liquids

310FR. Stainless steel AISI 316L filter regulator serie 10 for air, gas and liquids Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com 310FR Stainless steel AISI 316L filter regulator serie 10 for air, gas and liquids FEATURES

More information

Diaphragm seal with flange connection With flush diaphragm Model

Diaphragm seal with flange connection With flush diaphragm Model Diaphragm seals Diaphragm seal with flange connection With flush diaphragm Model 990.27 WIKA data sheet DS 99.27 for further approvals see page 3 Applications Chemical process industry Petrochemical industry

More information

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700 SAPAG Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Features Thermal expansion, to API 520 Certified to ASME VIII for air and steam Gas, Steam and Liquid service Integral nozzle -

More information

QSLM 2000. Dual inlet decompression unit with automatic change-over system FEATURES

QSLM 2000. Dual inlet decompression unit with automatic change-over system FEATURES Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com QSLM 2000 Dual inlet decompression unit with automatic change-over system FEATURES It allows

More information

FILTER, REGULATOR AND FILTER/REGULATOR stainless steel 316L compact 1/4, high flow 1/4-1/2

FILTER, REGULATOR AND FILTER/REGULATOR stainless steel 316L compact 1/4, high flow 1/4-1/2 FILTER, REGULATOR AND FILTER/REGULATOR stainless steel L compact /, high flow / - / Air Preparation Series FEATURES Stainless Steel, and intended for corrosive environment and suitable for use in potentially

More information

TRI CLAMP PRESSURE REGULATORS

TRI CLAMP PRESSURE REGULATORS Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

T&S Ball Valves. High Technology Valve & Fitting Series.

T&S Ball Valves. High Technology Valve & Fitting Series. T&S Ball Valves High Technology Valve & Fitting Series www.superlok.com 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

EN20 EN50. Double-stage modular decompression unit for oenological application. FEATURES Dual inlet and single outlet decompression unit.

EN20 EN50. Double-stage modular decompression unit for oenological application. FEATURES Dual inlet and single outlet decompression unit. Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com EN20 EN50 Double-stage modular decompression unit for oenological application FEATURES

More information

Ball Valves Subsea Series

Ball Valves Subsea Series Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing

More information

167D Series Switching Valves

167D Series Switching Valves June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are

More information

ACCESSORI ACCESSORIES

ACCESSORI ACCESSORIES AESSORI AESSORIES A art. 556 AESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 attacchi M F - - 1/2 - tipo /FLANGIA - tipo /FLANGIA E PREMISTOPPA AESSORIES

More information

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Differential Pressure Manifolds - M4A and M4T 3-Valve Manifolds ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Block and Bleed Gauge Valve M9 Features and Benefits Cost savings/less labor results when unitizing

More information

Block and Bleed Gauge Valves M25 and M251

Block and Bleed Gauge Valves M25 and M251 Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,

More information

Pressure Control for CO 2

Pressure Control for CO 2 Control for CO 2 A range of pressure control valves are available for gaseous CO 2 use in high flow applications. The CO 2 source can be a bulk liquid CO 2 storage tank, a high pressure tank or manifold

More information

Check Valves & Actuated Valves

Check Valves & Actuated Valves heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric

More information

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1

Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1 Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

Compact pressure switch Flameproof enclosure Ex d Model PCA

Compact pressure switch Flameproof enclosure Ex d Model PCA Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators 1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk

More information

excess flow control XVH Series Excess Flow Valve

excess flow control XVH Series Excess Flow Valve Excess Flow Valve Circle Seal Controls 2301 Wardlow Circle Corona, CA 92880 Phone (951) 270-6200 Fax (951) 270-6201 www.circlesealcontrols.com excess flow control Excess Flow Valves XVH Series Excess Flow

More information

A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction

A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction Made in Britain Valves and Manifolds Double Block and Bleed Valves Monoflange Valve Chart Recorders Calibration Equipment Positioners Accessories A global supplier of quality instrumentation/piping specification

More information

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

RPS. Sanitary sampling valves SAMPLING

RPS. Sanitary sampling valves SAMPLING Sanitary sampling valves SAMPLING CHARACTERISTICS The fully autoclavable sampling valves are designed for aseptic sampling of liquids and pharmaceutical products. Made entirely in AISI 316L, the standard

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.korlokusa.com Kor-Lok USA Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54

More information

Instruis line of Instrument Isolation Valves

Instruis line of Instrument Isolation Valves Instruis line of Instrument Isolation Valves Instrument Root Valves, Series IM Transmitter Isolation Valves, Series TI Instrument Isolation Fabflex Manifolds Instrument Root Valve What is an Instrument

More information

Glycerine Filled Control Pressure Gauges

Glycerine Filled Control Pressure Gauges HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Glycerine Filled Control Pressure Gauges Dutch Hydraulic Consultants Tel. +31-(0)6-83695868 Achterweg ZZ 8 Mail info@dhc-hydraulic.nl

More information

CONDENSED CATALOG CC

CONDENSED CATALOG CC CONDENSED CATALOG CC-2011 www.versa-valves.com e-mail: sales@versa-valves.com THE COMMITMENT CONTINUES Fluid Power is our business. It is our only business, so we have to be good at it. Since its beginning

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

Gas Turbine Valves. Gas Turbine Valves. International, Inc. Company ACIRCOR. DV4 Drain Valves. ASV134 Purge Valves

Gas Turbine Valves. Gas Turbine Valves. International, Inc. Company ACIRCOR. DV4 Drain Valves. ASV134 Purge Valves Valves Valves DV4 Drain Valves ASV134 Purge Valves DR5 Mk9 Back Pressure Maintaining Valve with pressure offset FV2 & 3 Fuel Flow Control Valves We design, machine, build and test all our products on one

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

ALTA PRESSIONE A 2 E TRE VIE CATALOGO HIGH PRESSURE TWO-THREE WAYS BALL-VALVES ENTER

ALTA PRESSIONE A 2 E TRE VIE CATALOGO HIGH PRESSURE TWO-THREE WAYS BALL-VALVES ENTER CATALOGO 01-001-4 VALVOLE A SFEA ALTA PSIONE A 2 E TE VIE HIGH PSUE TWO-THEE WAYS BALL-VALV ENTE Le valvole a sfera CIOCCA "CH", grazie alla tecnologia, consentono un impiego anche in condizioni di lavoro

More information

Rosemount Manifolds. Product Data Sheet August 2016 00813-0100-4733, Rev PE. Factory assembled, leak-tested, and calibrated

Rosemount Manifolds. Product Data Sheet August 2016 00813-0100-4733, Rev PE. Factory assembled, leak-tested, and calibrated Product Data Sheet ugust 2016 00813-0100-4733, Rev PE Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, in-line, and conventional Integral

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

400 SERIES. Needle Valves Standard, Hard Seat

400 SERIES. Needle Valves Standard, Hard Seat Needle Valves Standard, Hard Seat 400 SERIES 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary

More information

FLASH TANK ECONOMIZER PRODUCT GUIDE

FLASH TANK ECONOMIZER PRODUCT GUIDE FLASH TANK ECONOMIZER PRODUCT GUIDE Overview A flash tank is used to recover blowdown energy in the form of flash steam and blowdown. This can only be used with a deaerator or some other pressurized device.

More information

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 Series 240 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 DIN ANSI versions Application Mixing or flow-diverting valves for use in process engineering industrial applications

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

SPECIFICATIONS WALL MOUNTED, 1 WORKER FILTRATION SYSTEM

SPECIFICATIONS WALL MOUNTED, 1 WORKER FILTRATION SYSTEM 9873-40, 9873-40 W/O WALL MOUNTED, 1 WORKER FILTRATION SYSTEM Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements

More information

Accessories for Differential Pressure and Flow Regulators

Accessories for Differential Pressure and Flow Regulators Self-operated Regulators Accessories for Differential Pressure and Flow Regulators Compression fittings Needle valves Condensation chamber Orifice plates Welding neck flanges Control lines Application

More information

Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to 10,000 psi (70,000 kpa).

Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to 10,000 psi (70,000 kpa). Marsh gives you a choice of six valve series for accurate regulation, control and positive shutoff of gases or liquids up to. Marsh Needle Valves are used in oil and gas production, chemical processing,

More information

VALVES FOR REFRIGERATING SYSTEMS

VALVES FOR REFRIGERATING SYSTEMS VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is

More information

Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS

Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The

More information

Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description

Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR

More information

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems GENERAL: Steam and condensate piping and pump systems included in this document are for building systems starting at the pressure reducing station (PRV). DESIGN GUIDELINES: A. Design General 1. Definitions:

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

AIR LINE VALVES AND GAUGES

AIR LINE VALVES AND GAUGES AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Mini pressure switch Stainless steel switch enclosure Model PXS

Mini pressure switch Stainless steel switch enclosure Model PXS Mechatronic pressure measurement Mini pressure switch Stainless steel switch enclosure Model PXS WIKA data sheet PV 34.36 Process Mini Series Applications Pressure monitoring and control of processes Safety-critical

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Thermal safety drain valve Series STS.S

Thermal safety drain valve Series STS.S Thermal safety drain valve Series STS.S Main features - Double safety - 0 swivel connection of capillary - Available with different drain temperature settings: C, 8 C, 9 C, 9 C and 0 C - Installation in

More information

TECHNICAL DATA. 30a. September 18, 2009 1-1/4-8 (DN32 - DN200)

TECHNICAL DATA. 30a. September 18, 2009 1-1/4-8 (DN32 - DN200) September 18, 2009 30a 1. DESCRIPTION Viking EasyPac Commercial Riser Manifold Assemblies are available in sizes 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 6 and 8 for commercial systems. They are available with an

More information

HIGH PERFORMANCE BALL VALVES

HIGH PERFORMANCE BALL VALVES HIGH PERFORMANCE BALL VALVES H-6800 & H-6800 CNG SERIES H-6800 FEATURES Certified for ISO 15848-1:2006(E) On/off-service ball valve with 2-way pattern Diverter-service ball valve with 3-way pattern Stainless

More information

P630 High Flow Gas Regulator

P630 High Flow Gas Regulator P630 High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide Range of Flow Capacities The P630 is a spring loaded, direct-operated

More information

Clearscan 12 Diameter Chart Recorders

Clearscan 12 Diameter Chart Recorders Clearscan 12 Diameter Chart s Clearscan 12 Diameter Chart s Chart Drive Motor The Clearscan Chart uses chart drive motors that are available as mains powered, mains powered with battery back-up, mechanical

More information

RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:

RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling: Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north

More information

High Pressure Equipment High Pressure Valves, Fittings and Tubing

High Pressure Equipment High Pressure Valves, Fittings and Tubing igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle

More information

TY-FLO Needle Valves

TY-FLO Needle Valves Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted

More information

Process Screen Basket Filter PRFS

Process Screen Basket Filter PRFS Process Screen Basket Filter PRFS 130x 250x 520x 650x 1500x 2500x 1. Technical Specifications 1.1 General Screen basket filters are used mainly as coarse filters or prefilters. The direction of flow is

More information

Pressure Tank Gauge Module

Pressure Tank Gauge Module Pressure Tank Gauge Module Introduction The E-Plex 318PFTG series can be used in a wide variety of applications. The same tank sender can be used for diesel fuel, fresh water, grey water, or black water

More information

Pipe Connection Valves 1

Pipe Connection Valves 1 emale NPT/0,000 psi Pipe Connection Valves /8 " /4 " /8 " /2 " NPT Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve

Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research

More information

HIGH PERFORMANCE BALL VALVES

HIGH PERFORMANCE BALL VALVES 2373_Oliver Valves_Inners 12/5/4 1:21 PM Page 16 HIGH PERFORMANCE BALL VALVES f e a t u r e s Instrument ball valves to 15,000 PSI (trunion mount). Instrument manifolds to 3,000 PSI. Actuated ball valves.

More information

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s).

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s). SECTION 23 22 00 STEAM AND CONDENSATE PIPING AND PUMPS PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish

More information

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?

More information

w/ Centering Ring SWG - Internal Ring Material* Centering Ring Material* Filler Material

w/ Centering Ring SWG - Internal Ring Material* Centering Ring Material* Filler Material Materials: Max. Temp. Range Stainless Steel 304 760 C Stainless Steel 316L 760 C Filler Materials: Graphite 523 C PTFE 260 C Guide Ring Materials: Carbon Steel 538 C Inner Ring Materials: Stainless Steel

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 CONTROL VALVE MODEL C1 - Operation and Installation - 1 - manual C1-13B-ENG.doc JANUARY 2014 INDEX PAGE 1 IDENTIFICATION PLATE

More information

Many thanks for your interest in our products. Inval Industrial Valves Holland B.V.

Many thanks for your interest in our products. Inval Industrial Valves Holland B.V. Many thanks for your interest in our products telefoon / phone telefax / facsimile # 31 (0) 78 6411500 # 31 (0) 78 6413913 Inval Industrial Valves Holland, the Dutch Company specialized in marine valves

More information

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves Fluid Control Products A Constant Flow Of Ideas 2 Way General Purpose Solenoid Valves T A B L E O F C O N T E N T S Series General Description Pipe Body Material Page 8030 Low Pressure 3/8" - 3/" Brass

More information

Engineered Solutions

Engineered Solutions Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to

More information

BGC278 Series BASOTROL CE Approved Gas Valve

BGC278 Series BASOTROL CE Approved Gas Valve Installation Instructions BGC278 Issue Date April 1, 2013 BGC278 Series BASOTROL CE Approved Gas Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards Series 2 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 According to DIN US stards Application Mixing or flow-diverting valves designed for use in process engineering industrial

More information

HYDRAULICS. Hydraulic Range. for applications up to 10,000 PSI (720 bar)

HYDRAULICS. Hydraulic Range. for applications up to 10,000 PSI (720 bar) HYDRAULICS Hydraulic Range for applications up to 10,000 PSI (720 bar) www.cejn.us CEJN Your Global Partner in Hydraulics reliable products with smart solutions for all applications CEJN is the global

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

Basic, Slim & Slim Square Water heater

Basic, Slim & Slim Square Water heater Basic, Slim & Slim Square Water heater Installation and Operating Instructions IT-61019 S Agata Feltria (PU) Italy Phone 390541848030 Fax 390541848563 info@indelmarine.com www.isotherm.com Indel Marine

More information

GW C300 FLUID CONTROL VALVE PRESSURE REGULATING WITH ACTUATOR AND SOLENOID

GW C300 FLUID CONTROL VALVE PRESSURE REGULATING WITH ACTUATOR AND SOLENOID Ni Al Bronze PART NUMBER Super Duplex Titanium 3 64.515.44 64.515.46 64.515.47 4 64.516.44 64.516.46 64.516.47 6 64.517.44 64.517.46 64.517.47 8 64.518.44 64.518.46 64.518.47 10 64.519.44 64.519.46 64.519.47

More information

High Pressure Carbon Dioxide

High Pressure Carbon Dioxide GENERAL INFORMATION Chemetron High Pressure Carbon Dioxide fire extinguishing systems provide protection for a variety of industrial applications. High Pressure CO systems consist of four basic components

More information

Types 98LD and 98HD Differential Pressure Relief Valves

Types 98LD and 98HD Differential Pressure Relief Valves Instruction Manual Form 57 Types 98LD and 98HD September 2009 Types 98LD and 98HD Differential Pressure Relief Valves W657 W658 TYPE 98LD TYPE 98HD Figure. Types 98LD and 98HD Differential Pressure Relief

More information

Magnetic Level Indicators. Indication Control Monitoring. Eisenbau

Magnetic Level Indicators. Indication Control Monitoring. Eisenbau Magnetic evel Indicators Indication Control Monitoring Eisenbau HOW IT WORKS GENERA CHARACTERISTICS This type of indicator working on communicating vessels principle, is designed for side installation,

More information

MASS 2100 DI 3/40 MISURATORI DI PORTATA CORIOLIS FLOWMETER. Flow sensor MASS 2100 DI 3 to DI 40. Benefits. Function. Integration. Applications.

MASS 2100 DI 3/40 MISURATORI DI PORTATA CORIOLIS FLOWMETER. Flow sensor MASS 2100 DI 3 to DI 40. Benefits. Function. Integration. Applications. MASS 21 DI 3/4 CORIOLIS FLOWMETER MISURATORI DI PORTATA Flow sensor MASS 21 DI 3 to DI 4 of a variety of liquids and gases. The sensor offers superior performance of installation through a "plug & play"

More information

Gems Sensors offers a complete line of products for these industries:

Gems Sensors offers a complete line of products for these industries: Model 830 Instruction Bulletin No. 197070 Rev. A Wet/Wet Differential Pressure Transducer Gems Sensors offers a complete line of products for these industries: Industrial HVAC Test & Measurement Barometric

More information

Variable Area Flowmeters

Variable Area Flowmeters www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales

More information

AUTOMATIC CHANGEOVER MANIFOLD Series 915

AUTOMATIC CHANGEOVER MANIFOLD Series 915 AUTOMATIC CHANGEOVER MANIFOLD Series 915 FEATURES Fully automatic, simple, hassle-free operation No variance in delivery pressure Designed for ultra high purity gas service Built-in audio and visual alarm

More information

TRUNNION AND FLOATING BALL VALVES

TRUNNION AND FLOATING BALL VALVES Bulletin B08-02 BONETTI BONETTI - WVE TRUNNION AND FLOATING BALL VALVES STANDARD AND SPECIAL VALVES FOR HIGH PRESSURE AND HIGH TEMPERATURE SOFT OR METAL TO METAL SEATS CRYOGENIC, SUBSEA AND UNDERGROUND

More information

Dependable Well Site Protection PRESSURE CONTROL PRODUCTS

Dependable Well Site Protection PRESSURE CONTROL PRODUCTS Dependable Well Site Protection PRESSURE CONTROL PRODUCTS SPECIFICATIONS We are committed to product safety and quality. Argus Pressure Switches and Isolation Valves conform to the following standards:

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4 Page 1 of 5 STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK-5100-00/J.02/0015-A4 Rev No. Issue Date Pages Rev Description Prepared A 12.08.08 5 Issued for Comments / Approval Checked

More information

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS A variety of hydraulic pumps is offered for various liquid output pressure up to 33,500 psi (2311 bar). Sprague Products pumps service water, oil and most corrosive

More information

Automatic Self-cleaning Filters HSBIL Series

Automatic Self-cleaning Filters HSBIL Series Stainless steel, duplex & super duplex steels and special alloys construction. Cleaning without flow interruption. Filtration grade from 25 microns. Scratching and suction cleaning system. Advanced hydrodynamic

More information