Modification Date Sign.

Transcription

1 dokument år ej revideras manuellt Issue Modification ate O HNg O HNg hkd. HW HW 43 57,15 This document is our property and shall not without our written permission be altered, copied or communicated to a third party ,4 25,5 Top view trl. circ. Shown in Pos I ( actuated) Pos I om Pos II Ind ,15 UTION! S SNSITIV 4x M4 epth min 5 lo0,2 NM LL c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH WR62/R140/WG18 Latching Ref. hkd. ppvd. esigned l Sheet Scale Issue oc. no. 5/2-04 HW 1 (2) 1:1,5 WS8086P/00

2 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8086P/00 R T requency range VSWR d 90 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw Waveguide size WR62 / R140 / WG18 Hole dimensions according to MIL-TL-3922/ (6-32 UN-2) thread depth min 5 TUTOR T Operating voltage 28±3 V Operating current 1, Self cut off Switching time 300 ms uty (min time between 500 ms -40 to +40 successive operations) linearly increasing to 2 s at +85 onnector MS P Mating connector MS S or eq. POSITION INITOR Voltage / urrent 30 V Max, 100 m Max Resistive load MHNIL T Material inishing ir pressure ir leakage Weight Life luminium alloy, u free hromate per MIL and black painted 0.1 MPa overpr. Max 10 cm 3 /min (0.1 MPa overpr.) Max 0,5 kg Max actuations NVIRONMNTL T mbient temperature Vibration Humidity -40 to Hz, 3 mm amplitude Hz, 15 g 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8086P/00 49

3 dokument år ej revideras manuellt Issue Modification ate O HNg hkd. HW 43 57,15 This document is our property and shall not without our written permission be altered, copied or communicated to a third party ,4 25,5 Top wiev R trl. circ. Shown in de-energized position N om Pos II Ind ,15 UTION! S SNSITIV NM LL 4x M4 epth min 5 c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH WR62/R140/WG18 ail-safe Ref. hkd. ppvd l HW HW Sheet 1 (2) esigned Scale Issue oc. no. 1:1,5 WS8087P/00

4 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8087P/00 R T requency range VSWR d 90 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw lange interface MIL-TL-3922/ Modified with 6-32 UN-2, thread depth min 5 TUTOR T Operating voltage 28±3 V Operating current 1, uto switch on to holding current after 200 ms Holding current 300 m Switching time 300 ms uty (min time between 500 ms -40 to +40 successive operations) linearly increasing to 2 s at +85 onnector MS P Mating connector MS S or eq. POSITION INITOR Voltage / urrent 30 V Max, 100 m Max Resistive load MHNIL T Material inishing ir pressure ir leakage Weight Life luminium alloy, u free hromate per MIL and black painted 0.1 MPa overpr. Max 10 cm 3 /min (0.1 MPa overpr.) Max 0.5 kg Max actuations NVIRONMNTL T mbient temperature Vibration Humidity -40 to Hz, 3 mm amplitude Hz, 15 g 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8087P/00 51

5 -dokument år ej revideras manuellt Issue Modification ate hkd. O HNg HW 4x M4 epth min 5 lo0,2 40 This document is our property and shall not without our written permission be altered, copied or communicated to a third party. Top wiev UTION! S SNSITIV trl. circ. R N om Pos II OM II 40 TUTOR POS.IN. SHOWN -NRGIZ Shown in de-energized position Ind. q 47,6 ±0,3 c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH WR62/R140/WG18 ail-safe Ref HNg hkd. ppvd. esigned Sheet Scale Issue oc. no. 1(2) 1:1 WS8088P/00

6 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8088P/00 R T requency range VSWR d 60 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw lange interface MIL-TL-3922/ Modified with 6-32 UN-2, thread depth min 5 TUTOR T Operating voltage Operating current Holding current Switching time uty (min time between successive operations) onnector 28±3 V 1, Self cut off ms 500 ms -40 to +40 linearly increasing to 2 s at +85 Soldering pins POSITION INITOR Position indicator current 60 V Max, 50 m Max Resistive load MHNIL T Material inishing ir pressure ir leakage Weight Life luminium alloy, u free hromate per MIL and black painted 0.1 MPa overpressure Max 10 cm 3 /min. (0.1 MPa overpr.) Max 0.35 kg Max actuations NVIRONMNTL T mbient temperature Vibration Humidity -40 to Hz, 3 mm amplitude Hz, 15 g 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8088P/00 53

7 -dokument år ej revideras manuellt Issue Modification ate O HNg HW hkd. 4x M4 epth min 5 lo0,2 40 This document is our property and shall not without our written permission be altered, copied or communicated to a third party. Top wiev UTION! Never connect supply voltages to pins and simultaneously. Severe damage will result. UTION! S SNSITIV trl. circ. Shown in Pos I ( actuaed) Pos I om Pos II Ind. I OM 40 II TUTOR POS.IN. SHOWN IN POS I q 47,6 ±0, c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH WR62/R140/WG18 Latching Ref HNg hkd. ppvd. esigned Sheet Scale Issue oc. no. 1(2) 1:1 WS8089P/00

8 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8089P/00 R T requency range VSWR d 60 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw lange interface MIL-TL-3922/ Modified with6-32 UN-2, thread depth min 5 TUTOR T Operating voltage Operating current Switching time uty (min time between successive operations) onnector 28±3 V 1, Self cut off 150 ms 500 ms -40 to +40 linearly increasing to 2 s at +85 Soldering pins POSITION INITOR Position indicator current 60 V Max, 50 m Max Resistive load MHNIL T Material inishing ir pressure ir leakage Weight Life luminium alloy, u free hromate per MIL and black painted 0.1 MPa overpressure Max 10 cm 3 /min. (0.1 MPa overpr.) Max 0.35 kg Max actuations NVIRONMNTL T mbient temperature Vibration Humidity -40 to Hz, 3 mm amplitude Hz, 15 g 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8089P/00 55

9 -dokument år ej revideras manuellt Issue Modification ate O HNg HW hkd. 40 This document is our property and shall not without our written permission be altered, copied or communicated to a third party. Top wiev trl. circ. Opened during VSWR >1,2 Shown in Pos I ( actuaed) G H J K L M N P Pos I om Pos II Ind. 1 Ind. 2 Ind. 3 INHIIT 4x M4 epth min 5 lo0, q47,6 MNUL OVRRI UTION! S SNSITIV c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: Ref. General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH hkd. ppvd. esigned Sheet Scale Issue oc. no WR62/R140/WG18 Latching WS 8189P/00 1:1,5 HNg 1 (2)

10 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8189P/00 R T requency range VSWR d 60 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw lange interface MIL-TL-3922/ Modified with 6-32 UN-2, thread depth min 5 TUTOR T Operating voltage 28±3 V Operating current 1, Self cut off Switching time 100 ms uty (min time between 500 ms -20 to +40 linearly successive operations) increasing to 2 s at +70 onnector MS P Mating connector MS S or eq. POSITION INITOR Voltage / urrent Position indicator 30 V Max, 100 m Max Resistive load Three sets of -form contacts and one set of inhibit contact, opened during VSWR >1.2 MHNIL T Material inishing ir pressure ir leakage Weight Life luminium alloy, u free hromate per MIL and black painted 0.1 MPa overpr. Max 10 cm 3 /min (0.1 MPa overpr.) Max 0.45 kg Max actuations NVIRONMNTL T mbient temperature Vibration Humidity -20 to Hz, 3 mm amplitude Hz, 15 g 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8189P/00 57

11 dokument år ej revideras manuellt Issue Modification ate oax connectors twisted MTr Paragraphs added HNg hkd. HW HW q15,56 47,6 47,6 This document is our property and shall not without our written permission be altered, copied or communicated to a third party. Top wiev trl. circ. Opened during VSWR >1,2 Shown in Pos I ( actuaed) G H J K L M N P Pos I om Pos II Ind. 1 Ind. 2 Ind. 3 INHIIT MNUL OVRRI UTION! S SNSITIV O40 c SIVRS L rawing principle SS 1902 Tolerancing principle ISO 8015 imensions in mm SIVRS UNLSS OTHRWIS STT TH OLLOWING PPLIS: General tolerances, linear and angular dimensions: ISO 2768-c urop. proj. Title WVGUI SWITH WR62/R140/WG18 Latching with OX PT Ref. hkd. ppvd. esigned l HW HW Sheet 1 (2) Scale Issue oc. no. 1:2 WS8189P/70

12 SIVRS Reference pproved Origin date Issue date Issue Page ocument HNg HW (2) WS 8189P/70 R T Waveguide requency range VSWR d 60 d 125 kw at 0.1 MPa abs., +25 verage power 2 kw lange interface MIL-TL-3922/ Modified with 6 32 UN-2, thread depth min 6 oax requency range VSWR d 40 d 5 kw verage power 15 W max oax connector SM-female, waveguide-coax 120 d TUTOR T Operating voltage 28±3 V Operating current 1, Self cut off Switching time 100 ms onnector MS P Mating connector MS S or eq. POSITION INITOR Voltage / urrent Position indicator MHNIL T Material inishing ir pressure ir leakage Weight Life 30 V Max, 100 m Max Resistive load Three sets of -form contacts and one set of inhibit contact, opened during VSWR >1.2 luminium alloy; u-free hromate per MIL MPa overpr. Max 10 cm 3 /min (0.1 MPa overpr.) Max 0.6 kg Max actuations NVIRONMNTL T mbient temperature -20 to +70 Vibration 5 18 Hz, 3 mm amplitude Hz, 15 g Humidity 100%RH if dry air in waveguide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Sivers Lab, Sweden WS 8189P/70 59