ES-SDA Solar Shading Products Database
|
|
- Brandon McCoy
- 7 years ago
- Views:
Transcription
1 ES-SDA Solar Shading Products Database Dave Bush, Chair ES-SDA Qualicheck, Anthens 9 th March 2016
2 ES-SDA Solar Shading Products Database Why do we need it? Credibility of shading properties information regulation and profession EPBD requirements compliance and quality: ES-SDA as best case in EU-Qualicheck Education of profession (shading and building developers)
3 Longer term objectives Development of International reliable Database Cloud based calculation tool Complex modelling but simple to use
4 Only a validation of data Not a search tool to compare manufacturers product or to find the best performing product
5 Target group database Manufacturers of fabric/material/finished products
6 Design based on the Glazing database WIS Manufacturer submits tested data Samples of material with submission
7 Procedure steps Web tool for data submission Manufacturer (material/product) Optical data and Product ID data
8 Optical data Column number Content 1 Wavelength 2 Total normal hemispherical transmittance, Direct component, Front surface, t n, dir 3 Total normal hemispherical transmittance, Diffuse component, Front surface, t n, diff 4 Total normal hemispherical transmittance, Direct component, Back surface, t n, dir 5 Total normal hemispherical transmittance, Diffuse component, Back surface, t n, diff 6 Total normal hemispherical reflectance, Direct component, Front surface, r n, dir 7 Total normal hemispherical reflectance, Diffuse component, Front surface, r n, diff 8 Total normal hemispherical reflectance, Direct component, Back surface, r' n, dir 9 Total normal hemispherical reflectance, Diffuse component, Back surface, r' n, diff
9 Header Field Table A Fabric material manufacturer (Value to be entered) { Units: } The wavelength unit used for the optical data (Nanometers) { Manufacturer: } Fabric material Supplier Name (text string maximum 50 characters) { Product name: } Name of fabric (text string maximum 50 characters) { Reference: } Supplier reference of fabric (text string maximum 255 characters) { Material: } Description of the material the product is made from (text string maximum 50 characters) { Appearance: } Describe the colour of the fabric. If the fabric is two sided detail the colour on the front side - Sun Exposed Face" and the colour on the back side - Room Exposed Face (text string maximum 255 characters) { Thickness: } Fabric/material thickness in millimetres (mm) Number greater than 0 in millimetres { Orientation: } Weft or warp vertical or NA (Not Applicable) { Conductivity: } Thermal conductivity of the fabric material, in Wm -1 K -1. Number greater than 0. { Emissivity front: } Hemispherical emissivity of the material, front surface. Number greater than 0 and less than 1 (measurement or default value) (*) { Emissivity back: } Hemispherical emissivity of the material, back surface. Number greater than 0 and less than 1. { IR transmittance: } Total hemispherical transmittance in the (far) infrared (λ > 5000 nm). Number greater than 0 and less than 1 (Openness factor and IRtransmittance are usually equal) { Info: } Add any other information you wish e.g. weight, openness factor. (text string maximum 50 characters)
10 Header Field Table B Slat material manufacturer (Value to be entered) { Units: } The wavelength unit used for the optical data (Nanometers) { Manufacturer: } Slat Material Supplier Name (text string maximum 50 characters) { Product name: } Name of slat material (text string maximum 50 characters) { Reference: } Supplier reference of slat material (text string maximum 255 characters) { Material: } Description of the material the product is made from (text string maximum 50 characters) { Appearance: } Describe the front side of the slat. (text string maximum 255 characters) { Thickness: } Number, greater than 0, thickness of slat in mm. { Orientation:} Vertical or horizontal. { Width of the slats: } Number, greater than 0, width of slat in mm. { Angle: } -90 slat angle +90 (only for fixed slats) { Crown height: } positive for convex surface facing outwards, negative for concave surface facing outwards { Pitch: } Number, greater than 0, distance between slats in mm. { Emissivity front: } Hemispherical emissivity of the material, top surface. Number greater than 0 and less than 1 (measurement or default value). { Emissivity back: } Hemispherical emissivity of the material, back surface. Number greater than 0 and less than 1. { Conductivity: } Number greater than 0. Thermal conductivity of the slat material, in Wm -1 K -1 { IR transmittance: } Total hemispherical transmittance in the (far) infrared (λ > 5000 nm). Number greater than 0 and less than 1. { Info: } Add any other information you wish e.g. weight (text string maximum 50 characters)
11 Header Field Table C Finished Product Manufacturer (value to be added) { Manufacturer:} Name Material (*) (Fabric/slat ) and Name Product manufacturer (text string maximum 50 characters) { Product name: } Name of product/system (text string maximum 50 characters)l { Reference: } Reference of product (text string maximum 255 characters) { Product type: } A number, based on these categories: 1 = Diffusing devices (Roller blinds, screens) 2 = Slat devices (Venetians, fixed slats, louvres) 3 = Pleated Blinds 4 = Roller shutter { Position: } A number, based on these categories: 1 = Internal 2 = External 3 = Internal and External { Delta R EN : } Thermal resistance in m².k/w according to EN (**) { Info: } Add any other info you like to add
12 Table 1.A Header fields required for ES-SDA fabric material identification { Units: Nanometers} { Manufacturer: The Best Fabric Company} { Product name: shaderight 3914} { Reference: { Appearance: front cream/back black} { Thickness: 0.6} { Orientation: weft vertical } { Conductivity: 0.15} { Emissivity front: 0.9} { Emissivity back: 0.9} { IR transmittance: 0.06} { Info: weight 290g/sqm, Openness Factor OF: 0.06} Table 1.B Header fields required for ES-SDA slat material identification { Units: Nanometers} { Manufacturer: The Best Slat Company} { Product name: shaderight 3914} { Reference: { Material: Aluminium } { Appearance: Light grey} { Thickness: 0.4} { Orientation : Horizontal } { Width : 80 } { Crown height : 13 } { Pitch : 72 } { Emissivity front: 0.9} { Emissivity back: 0.9} { Conductivity: 100} { IR transmittance: 0} { Info: weight 290g/sqm} Table 1.C Header fields required for ES-SDA Product identification { Manufacturer: The Best Blind Company} { Product name: Right shade (*) } { Reference: { Product type: 1} { Position: 2} { Delta R EN : 0.17} { Info: }
13 Procedure steps Data submission Webtool Manufacturer to ES-SO Coordinator Data Form for each material(fabric/slat) or finished product Txt file and lab report Reduced procedure for manufacturer finished product Step one Initial Technical Review : 2 weeks Compliance data content and format Step two Pre-calculation properties: according to EN Step three Peer Review : 4 weeks (*) Peer review dossier: data file, table pre-calculated values and spectral curves, sample material, reports external lab
14 Peer review Principal peer reviewers: two members examine data set Data sent to all All Review Committee additional check Discontinuities, excessive variation, incorrect wavelength intervals, integrated luminous, solar and thermal optical properties and completeness of the file Data proof by accredited lab or If data proof by manufacturer cfr procedure according EN-Standards, in addition 5% reports by accredited external lab to be conveyed (min. 3 products, selection by peer review) 6 weeks procedure (plus 2 extra weeks as from receiving external lab results when data proof from manufacturer(*)) Procedure for resolving matters
15 Establishment of Peer Review Committee Candidate Members : ES-SO members, companies submitting data, independent experts. Appointed by the ES-SO Board Chair: by election among members and appointed by the ES-SO board for 12 months, re-appointing possible for further 12 months Membership annually review by the ES-SO board Formal meetings: twice per annum Project Coordinator: appointed by ES-SO Peer Review Committee Members to undersign agreement to follow strictly the Procedures See document ES-SO Data Submission and Peer Review Procedures Working website login Peer review Committee
16 Target groups for the validated product properties Industry to participate, to understand the importance (ES-SO training ) Building developers to use (architects ) Building simulators to integrate EPB regulators to recognise Consumers to trust
17 Proposed data outputs ES-SDA Complete data set useful for Inputs for EPBD Building Codes Inputs for building modelling Inputs for energy performance indicator Inputs for EDIBATEC Inputs for ESBO computer modelling
18 Accredited labs Europe identified Belgium: BBRI (EN 410, EN ) France: CSTB (EN 410, , EN /-2) Germany: Fraunhofer Institut, IFT Rosenheim (EN 410/EN /-2), STFI (EN 410, , ) Other?
19 Test labs Still need to identify labs that are accredited to do testing Procedure for non-accredited or manufacturer testing To set up inter-lab comparison discussions
20
21 Questions
22 The sole responsibility for the content of this presentation lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein.
Constructions Database User Guide <Virtual Environment> 5.9
Constructions Database User Guide 5.9 Page 1 of 35 Contents 1. Introduction...3 2. Units...4 3. Main Dialogue Project Constructions...5 3.1. Outline...5 3.2. Construction Classes
More informationSommer Informatik GmbH Sepp-Heindl-Str. 5 83026 Rosenheim Tel: 08031-24881 Fax: 08031-24882 info@sommer-informatik.de www.sommer-informatik.
Sommer Informatik GmbH Sepp-Heindl-Str. 5 83026 Rosenheim Tel: 08031-24881 Fax: 08031-24882 info@sommer-informatik.de www.sommer-informatik.de Question: How is it possible to add our specific data into
More informationSolar shading for low energy buildings
Solar shading for low energy buildings FEBRUARY 2012 Edition 1 How shutters and blinds reduce the energy needs of buildings and improve their thermal and visual comfort MEMBERS OF THE ES-SO TECHNICAL COMMITTEE
More informationLinear thermal transmittance of the assembly of the glazing and the frame in windows
Linear thermal transmittance of the assembly of the glazing and the frame in windows Svend Svendsen,Professor, Technical University of Denmark; ss@byg.dtu.dk; www.byg.dtu.dk Jacob B. Laustsen, Assistant
More informationElegance SC. Solar Control
Elegance SC Solar Control Sapa Building System Building Understanding In an age of global warming, the reduction of carbon emissions is a key factor when both selecting materials for a building and how
More informationIntegral Shading & Privacy Solutions
Integral Shading & Privacy Solutions Manual Magnetic Blinds Betweenglassblinds offer a versatile and contemporary means of privacy and shading suitable for large door panels, screens, office partitioning,
More informationThe Industry s Most Advanced Sun-Sensing, Adaptive-Tinting Technology For Dynamic Windows
by The Industry s Most Advanced Sun-Sensing, Adaptive-Tinting Technology For Dynamic Windows In Alliance with OCCUPANT COMFORT All of the windows above have the same exterior tint of glass. Why such a
More informationwww.ferrari-architecture.com
www.ferrari-architecture.com Solar protection colour example: 99-2087 (according to EN 14501with type "C" double glazing insulating materials) Flux lumineux Micro-ventilated textiles for indoor solar protection
More informationPlaisance 50. Windows and doors. Sapa Building System
Plaisance 50 Windows and doors Sapa Building System Plaisance 50 is a non-thermally broken system for aluminium windows and doors with a building depth. The system offers a wide range of inward and outward
More informationHoesch Matrix System individuell. ThyssenKrupp Steel Europe Thinking the future of steel
Hoesch Matrix System individuell ThyssenKrupp Steel Europe Thinking the future of steel 2 3 Steel in perfect shape and precision Steel the material of contemporary architecture. Throughout the production
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationEco Pelmet Modelling and Assessment. CFD Based Study. Report Number 610.14351-R1D1. 13 January 2015
EcoPelmet Pty Ltd c/- Geoff Hesford Engineering 45 Market Street FREMANTLE WA 6160 Version: Page 2 PREPARED BY: ABN 29 001 584 612 2 Lincoln Street Lane Cove NSW 2066 Australia (PO Box 176 Lane Cove NSW
More informationAvantis 75. Windows & Doors. Sapa Building System
Avantis 75 Windows & Doors Sapa Building System Avantis 75 is a thermally broken three-chamber window and door system, which sets the highest standards of thermal insulation and stability. Avantis 75
More information2) A convex lens is known as a diverging lens and a concave lens is known as a converging lens. Answer: FALSE Diff: 1 Var: 1 Page Ref: Sec.
Physics for Scientists and Engineers, 4e (Giancoli) Chapter 33 Lenses and Optical Instruments 33.1 Conceptual Questions 1) State how to draw the three rays for finding the image position due to a thin
More informationOut - Ecrano / 002010 White Charcoal
Out - Ecrano / 002010 White Charcoal front: back: Widths 270 cm TECHNICAL SPECIFICATION STANDARD RESULT composition Glassfibre 42% - PVC 58% openness factor NBN EN 410 2.00% weight NF EN 12127 650.00g/m²
More informationDespite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems
Despite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems during the summer making them virtually unusable for
More informationDepartment of Engineering Enzo Ferrari University of Modena and Reggio Emilia
Department of Engineering Enzo Ferrari University of Modena and Reggio Emilia Object: Measurement of solar reflectance, thermal emittance and Solar Reflectance Index Report Reference person: Alberto Muscio
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More information2.2 REFLECTIVE ROOFING (ADOPTED 19 DECEMBER 2006) 1. INTRODUCTION
2.2 REFLECTIVE ROOFING (ADOPTED 19 DECEMBER 2006) 1. INTRODUCTION There has been increasing awareness of the need for energy efficiency in housing in recent years, with the Residential Design Codes now
More informationV80 HEAD DETAIL - SECTION VIEW DRAWING SCALE 1:2. Dwg. No. V10101. 13mm min. 85mm. 72mm 95mm 65mm. 26mm. 10mm 60mm 75mm. 135mm.
13mm min. 72mm 95mm 65mm 85mm 26mm 10mm 60mm 75mm 135mm 145mm V80 HEAD DETAIL - SECTION VIEW Dwg. No. V10101 Manually operated blind with gearbox showing 90 & 45 degree crank penetrations in section view.
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationFederalDemocratic RepublicofEthiopia
FederalDemocratic RepublicofEthiopia EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety, equaljusticeforal,abeterinformedcitizenry,therule oflaw,worldtradeandworldpeace,thislegaldocumentis
More informationFull credit for this chapter to Prof. Leonard Bachman of the University of Houston
Chapter 6: SOLAR GEOMETRY Full credit for this chapter to Prof. Leonard Bachman of the University of Houston SOLAR GEOMETRY AS A DETERMINING FACTOR OF HEAT GAIN, SHADING AND THE POTENTIAL OF DAYLIGHT PENETRATION...
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationVITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A
Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as
More informationPTYS/ASTR 206 Section 2 Spring 2007 Homework #2 (Page 1/5) NAME: KEY
PTYS/ASTR 206 Section 2 Spring 2007 Homework #2 (Page 1/5) NAME: KEY Due Date: start of class 2/6/2007 5 pts extra credit if turned in before 9:00AM (early!) (To get the extra credit, the assignment must
More informationReflectance Measurements of Materials Used in the Solar Industry. Selecting the Appropriate Accessories for UV/Vis/NIR Measurements.
T e c h n i c a l N o t e Reflectance Measurements of Materials Used in the Solar Industry UV/Vis/NIR Author: Dr. Jeffrey L. Taylor PerkinElmer, Inc. 710 Bridgeport Avenue Shelton, CT 06484 USA Selecting
More information0.28" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-281XSB
.28" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-281XSB Spec No.:W2841C/D Rev No.: V.2 Date:Sep/3/29 Page: 1 OF 6 Features:.28 (inch) digit height. Excellent segment uniformity.
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationDiego Ibarra Christoph Reinhart Harvard Graduate School of Design
Building Performance Simulation for Designers - Energy DesignBuilder // EnergyPlus Tutorial #3 Construction Assemblies, Load Reduction & Shading GEOMETRY LOADS RESULTS Diego Ibarra Christoph Reinhart Harvard
More information2 Absorbing Solar Energy
2 Absorbing Solar Energy 2.1 Air Mass and the Solar Spectrum Now that we have introduced the solar cell, it is time to introduce the source of the energy the sun. The sun has many properties that could
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More informationEUROPEAN STANDARDS PERSONAL PROTECTIVE CLOTHING FOR FLAME RESISTANT. Alexander Gstettner, Lenzing AG Austria
EUROPEAN STANDARDS FOR FLAME RESISTANT PERSONAL PROTECTIVE CLOTHING Alexander Gstettner, Lenzing AG Austria W a t e r How are the standards organized? A 1 Testing Methods Standards specifiying performance
More informationMulti-layer Insulation Blanket for Roofs
Multilayer Insulation Blanket for Roofs Thermal Insulation in a 40mm thin, flexible, multilayer membrane Meets requirements of L1A, L1B 2010 In accordance with BR443 NHBC Acceptance Pitched & Flat roof
More informationOut - Serge 600 / 002006 White Yellow
Out - Serge 600 / 002006 White Yellow front: back: Widths 250 cm 270 cm 320 cm TECHNICAL SPECIFICATION STANDARD RESULT composition Fibreglass 42% - PVC 58% openness factor NBN EN 410 5.00% weight NF EN
More information1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
More informationProtocol for the Certification of Energy Simulation Software: First edition, December 2009
Copyright Agrément South Africa, December 2009 The master copy of this document appears on the website: http://www.agrement.co.za Protocol for the Certification of Energy Simulation Software: First edition,
More informationDesign Guidance for Schools in Washington, DC
www.commercialwindows.org Design Guidance for Schools in Washington, DC Introduction The energy use of a perimeter zone in a school depends on several design decisions window orientation, window area,
More informationPROTOCOL FOR BUILDING ENERGY ANALYSIS SOFTWARE For Class 3, 5, 6, 7, 8 and 9 buildings
PROTOCOL FOR BUILDING ENERGY ANALYSIS SOFTWARE For Class 3, 5, 6, 7, 8 and 9 buildings Version 2006.1 AUSTRALIAN BUILDING CODES BOARD JANUARY 2006 TABLE OF CONTENTS Foreword 1. Scope 2. Purpose and context
More informationModule 3.7. Thermal bridging
Module 3.7 Thermal bridging Learning Outcomes On successful completion of this module learners will be able to - Describe construction details which influence thermal bridging. 2 Introduction to thermal
More informationProtocol for the Certification of Energy Simulation Software: Second edition, September 2011
Copyright Agrément South Africa, September 2011 The master copy of this document appears on the website: http://www.agrement.co.za SANS 10400: The application of the National Building Regulations: Protocol
More informationINFRARED PARTS MANUAL
INFRARED PARTS MANUAL PIR325 FL65 GLOLAB CORPORATION Thank you for buying our Pyroelectric Infrared components. The goal of Glolab is to produce top quality electronic kits, products and components. All
More informationAn introduction to selling blinds
An introduction to selling blinds We are a small family owned independent blind manufacturer. We have been manufacturing blinds for trade and contract customers since 1991, from our factory in Hevingham
More informationOpening the Bonnet. Prof Darren Woolf WYSINWYG 1
Opening the Bonnet Prof Darren Woolf WYSINWYG 1 WYSINWYG What You See Is NOT What You Get: Looking inside the Pandora s Box Prof Darren Woolf WYSINWYG 2 WYSIWYG implies a user interface that allows the
More informationLASER-PROTECTION INFORMATION
LASER-PROTECTION INFORMATION µspeed-systems Version V2.0 Creation date: 18.07.2012 page 1/8 LASER PROTECTION The µspeed sensor system is a laser-based measuring system. When using a µspeed, it is necessary
More informationGlass Technical Document
INTRODUCTION PPG has for many years recommended that early design considerations regarding the use of glass on commercial projects include evaluation of potential thermal stress breakage. Thermally induced
More informationApplication of Data Matrix Verification Standards
Data Matrix symbol verification at its most basic level eliminates the subjective quality determination that causes discord between marking and reading suppliers, and replaces those subjective opinions
More informationTech Bulletin. Understanding Solar Performance
Tech Bulletin Understanding Solar Performance Bekaert solar control window films use advanced technology to benefit consumers with quality solutions that enhance comfort and decrease energy use. By understanding
More informationThermal Imaging Test Target THERMAKIN Manufacture and Test Standard
Thermal Imaging Test Target THERMAKIN Manufacture and Test Standard June 2014 This document has been produced by CPNI as the standard for the physical design, manufacture and method of use of the Thermal
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More informationThe Layman's Guide to ANSI, CEN, and ISO Bar Code Print Quality Documents
The Layman's Guide to ANSI, CEN, and ISO Bar Code Print Quality Documents AIM, Inc. 634 Alpha Drive Pittsburgh, PA 15238-2802 Phone: +1 412 963 8588 Fax: +1 412 963 8753 Web: www.aimglobal.org This Guideline
More informationWorking with Sky-Frame means cre ating comfortable, handsome living environments that make no compro mises. The frameless sliding window is a modular
EN 02 Working with Sky-Frame means cre ating comfortable, handsome living environments that make no compro mises. The frameless sliding window is a modular system that combines Swiss engineering ingenuity
More informationDesign Guidance for Schools in Phoenix, Arizona
www.commercialwindows.org Design Guidance for Schools in Phoenix, Arizona Introduction The energy use of a perimeter zone in a school depends on several design decisions window orientation, window area,
More informationTECHNICAL BULLETIN TECHNICAL DESCRIPTION DESCRIPTION OVERVIEW PROGRAMS. Data Sheet. Pilkington Toughened Safety Glass
Data Sheet Pilkington Toughened Safety Glass Introduction Pilkington has manufactured and marketed toughened glass for over 60 years. Its properties and performance have been proven in countless applications,
More informationTIL311 HEXADECIMAL DISPLAY WITH LOGIC
SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE, AND DISPLAY 4-BIT BINARY DATA 0.300-Inch (7,62-mm) Character Height Internal TTL MSI Chip With Latch, Decoder, High Brightness
More informationBER Assessors Dwellings Technical Bulletin
BER Assessors Dwellings Technical Bulletin Issue No. 2/12 April 2012 Contents: 1. SUPPLEMENTARY ELECTRIC WATER HEATING IN SUMMER... 2 2. PITCHED ROOF U-VALUE CALCULATIONS... 8 2.1. PITCHED ROOF, INSULATED
More informationANSI/ASHRAE Standard 140-2004 Building Thermal Envelope and Fabric Load Tests
ANSI/ASHRAE Standard 140-2004 Building Thermal Envelope and Fabric Load Tests DesignBuilder Version 1.2.0 (incorporating EnergyPlus version 1.3.0) - June 2006 1.0 Purpose The ANSI/ASHRAE Standard 140-2004
More informationAnalytical Testing Services Commercial Price List ManTech International Corporation January 2016
Analytical ing Services Commercial List ManTech International Corporation January 2016 TABLE OF CONTENTS MECHANICAL TENSILE TESTING... 1 DIFFERENTIAL SCANNING CALORIMETRY (DSC)... 2 THERMOMECHANICAL ANALYSIS
More informationGeometric Optics Converging Lenses and Mirrors Physics Lab IV
Objective Geometric Optics Converging Lenses and Mirrors Physics Lab IV In this set of lab exercises, the basic properties geometric optics concerning converging lenses and mirrors will be explored. The
More informationGuideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
More informationPortfolio Advice For UK and European Union applicants Architecture BA (Hons)
dmu.ac.uk/portfolio Portfolio Advice For UK and European Union applicants Architecture BA (Hons) Your portfolio As a vital part of your application we would ask you to submit a portfolio of work to demonstrate
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More information4.430 Daylighting. Christoph Reinhart. 4.430 Daylight Simulations
4.430 Daylighting Christoph Reinhart 4.430 Daylight Simulations Massachusetts Institute of Technology Department of Architecture Building Technology Program 1 MISC Google DIVA forum, onebuilding.org, radianceonline.org
More informationENERGY AUDIT. Project : Industrial building United Arab Emirates (Case study) Contact person (DERBIGUM):
ENERGY AUDIT Project : Industrial building United Arab Emirates (Case study) Contact person (DERBIGUM): Leonard Fernandes DERBIGUM project reference : UAE -2014 - EA 103 Author : Daniel Heffinck (DERBIGUM)
More informationWhat is Solar Control?
A better environment inside and out. Solar, Safety and Security Window Films: Tech Bulletin Understanding Solar Performance Solar Gard solar control window films use advanced technology to benefit consumers
More informationHow To Design A 3D Print In Metal
DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS
More informationTheremino System Theremino Spectrometer Technology
Theremino System Theremino Spectrometer Technology theremino System - Theremino Spectrometer Technology - August 15, 2014 - Page 1 Operation principles By placing a digital camera with a diffraction grating
More informationPrefabricated building PVC vertical sliding window
Prefabricated building PVC vertical sliding window SLOVENSKO ITALIA ESPAÑA ITALIA The company, we have the pleasure to introduce in this brochure, is an important and dynamic industrial company located
More informationSELECTIVE GLAZING FOR SUN CONTROL
SUN CONTROL GLAZING SELECTIVE GLAZING FOR SUN CONTROL Sun Factor 1st level performance for direct solar energy Solar energy control Solar control coating Only if the glass is exposed to sun rays! 2nd level
More informationGUIDANCE SHEET FOR CONSERVATORIES, SUNROOMS AND EXTENSIONS TO DWELLINGS.
GUIDANCE SHEET FOR CONSERVATORIES, SUNROOMS AND EXTENSIONS TO DWELLINGS. This leaflet provides guidance on how to attain compliance with The Building (Amendment) Regulations (Northern Ireland) 2006, Part
More informationscreens that fit you COLLECTION 2012-2015
screens that fit you COLLECTION 2012-2015 D interior exterior OF = 5% reflect sunlight outdoors www.copaco.be 8 OF = 5% reflect sunlight outdoors Colours & references / 0202 white white / 0802 linen white
More informationOptical Communications
Optical Communications Telecommunication Engineering School of Engineering University of Rome La Sapienza Rome, Italy 2005-2006 Lecture #2, May 2 2006 The Optical Communication System BLOCK DIAGRAM OF
More informationAssessing Cloud Spatial and Vertical Distribution with Infrared Cloud Analyzer
Assessing Cloud Spatial and Vertical Distribution with Infrared Cloud Analyzer I. Genkova and C. N. Long Pacific Northwest National Laboratory Richland, Washington T. Besnard ATMOS SARL Le Mans, France
More informationWindow Glass Design 5 According to ASTM E 1300
A User s Guide to: Window Glass Design 5 According to ASTM E 1300 A product of: 1 Table of Contents Table of Contents List of Figures Chapter 1: Window Glass Design 5 1.1 Introduction 1.2 Features ii iv
More informationTOPIC 5 (cont.) RADIATION LAWS - Part 2
TOPIC 5 (cont.) RADIATION LAWS - Part 2 Quick review ELECTROMAGNETIC SPECTRUM Our focus in this class is on: UV VIS lr = micrometers (aka microns) = nanometers (also commonly used) Q1. The first thing
More informationProduct information. Schüco Window AWS 65. 03.2009/Web Schüco AWS 65 1-11
Schüco Window AWS 65 The basic window system, Schüco Window AWS 65, with a comprehensive range for imaginative designs, is particularly suitable for block constructions with a basic depth of 65 mm. Features
More informationPhysics 25 Exam 3 November 3, 2009
1. A long, straight wire carries a current I. If the magnetic field at a distance d from the wire has magnitude B, what would be the the magnitude of the magnetic field at a distance d/3 from the wire,
More informationApplications. Blue IF 039, Green IF 062, Yellow IF 022, Orange IF 041, Red IF 090,Dark Red IF 091 IR pass IF 092, IF098, IF 093 Surface 1 5/2 0.
Color Filters Blue, Green, Yellow, Orange, Red & NIR Color Filters Blue and Green filters, transmitts wavelength in a corresponding color as seen by the human eye, while yellow, orange and red are long
More informationSolar Energy. Outline. Solar radiation. What is light?-- Electromagnetic Radiation. Light - Electromagnetic wave spectrum. Electromagnetic Radiation
Outline MAE 493R/593V- Renewable Energy Devices Solar Energy Electromagnetic wave Solar spectrum Solar global radiation Solar thermal energy Solar thermal collectors Solar thermal power plants Photovoltaics
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationRESULTS FROM A SIMPLE INFRARED CLOUD DETECTOR
RESULTS FROM A SIMPLE INFRARED CLOUD DETECTOR A. Maghrabi 1 and R. Clay 2 1 Institute of Astronomical and Geophysical Research, King Abdulaziz City For Science and Technology, P.O. Box 6086 Riyadh 11442,
More informationPDF Created with deskpdf PDF Writer - Trial :: http://www.docudesk.com
CCTV Lens Calculator For a quick 1/3" CCD Camera you can work out the lens required using this simple method: Distance from object multiplied by 4.8, divided by horizontal or vertical area equals the lens
More informationCorso di Fisica Te T cnica Ambientale Solar Radiation
Solar Radiation Solar radiation i The Sun The Sun is the primary natural energy source for our planet. It has a diameter D = 1.39x10 6 km and a mass M = 1.989x10 30 kg and it is constituted by 1/3 of He
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More information3-D Modeller Rendered Visualisations
Recognised energy Dynamic Simulation Modelling (DSM) software DesignBuilder is a user interface to the EnergyPlus DSM. EnergyPlus builds on the most popular features and capabilities of BLAST and DOE-2
More informationAP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light
AP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light Name: Period: Date: MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Reflection,
More informationB Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
More informationDOMUS & ALDUS THE WINDOW CONCEPT WITH A STUNNINGLY MODERN APPEARANCE
DOMUS & ALDUS THE WINDOW CONCEPT WITH A STUNNINGLY MODERN APPEARANCE MODERN DESIGN DOMUS & ALDUS 2 3 ALDUS & DOMUS PRODUCT DETAILS 1 2 3 Option of glazing bar Architectural designed handle Option of trickle
More information3.0mm (1.2") 8 8 Hyper Red Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XVB
.mm (.") Hyper Red Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-XVB Spec No: WA/B Rev No: V. Date:Sep// Page of Features:.inch (.mm) Matrix height. Colors: Hyper Red. Flat package and light
More informationSolar Window Shading Indexion
Development of numerical shading devices models for the use in building thermal simulation Jean NOËL Jean NOËL (JNLOG) Free-Lance Engineer 15 place Carnot 692 Lyon France Report n 42 Author : Jean NOËL
More informationGetting the Most Out of Your Laser Rangefinder. Major John L. Plaster, USA (retired)
Getting the Most Out of Your Laser Rangefinder By Major John L. Plaster, USA (retired) It s hard to believe. Just twenty years ago laser rangefinders were an expensive curiosity; but today they re modestly
More informationClimate and Energy Responsive Housing in Continental Climates. The Suitability of Passive Houses for Iran's Dry and Cold Climate. Farshad Nasrollahi
Climate and Energy Responsive Housing in Continental Climates The Suitability of Passive Houses for Iran's Dry and Cold Climate Farshad Nasrollahi Table of Contents Abstract German Abstract Introduction
More informationOverview of the IR channels and their applications
Ján Kaňák Slovak Hydrometeorological Institute Jan.kanak@shmu.sk Overview of the IR channels and their applications EUMeTrain, 14 June 2011 Ján Kaňák, SHMÚ 1 Basics in satellite Infrared image interpretation
More informationThe Warm Edge for insulating glass
The Warm Edge for insulating glass 1. 3. SGGSWISSPACER 2. 4. The best product on the market by quite an edge Energy saving Lower heating costs through better insulation: the thermally improved spacer SGG
More informationrred.com ieverred.com
1Features/ Emitting Color/Green/ Lens Type/Water Clear/ Device Outline/3.52.81.9mm RoHS compliant/ RoHS 2Applications/ Backlight for MobileMachine Vision LCD Display/ Backlight in Dashboard and switch
More information3.0*3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-R30881XUYB
3.*3.mm (.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-R388XUYB Spec No: W288A/B Rev No: V.2 Date: Sep/8/27 Page: OF 6 Features:.2inch (3.7mm) Matrix height. Colors:Super
More informationAKRAPLAST Sistemi S.p.A. - I - 20026 Novate Milanese (Mi) - via Cascina del Sole, 70 Tel: (+39) 02 35 13 91 1 - Fax: (+39) 02 35 13 91 50 - E-mail:
Choose between alternatives marked by SPECIFICATION TEXT Wall; Northlight; realised with modular system type AKRAPAN by Akraplast Sistemi, composed of: 1) UV protected multi-wall polycarbonate panels with
More informationA concise guide to Safety Glasses, the different standards and the effects of light on the eye. Contents. Links. Year of publication: 2010
A concise guide to Safety Glasses, the different standards and the effects of light on the eye Year of publication: 2010 Produced by the leading supplier of Safety Glasses in the UK. All Rights Reserved.
More informationSide Hinged Doors GSW 40-L
Side Hinged Doors GSW 40-L GARAGE DOORS AND SIDE DOORS IN A WIDE RANGE OF DESIGNS NUMEROUS FINISHES, SURF ACES, COLOURS AND GLAZING ELEMENTS Extremely robust and highly insulating Superior quality Teckentrup
More information