How To Choose An Ez Form Cable From A Powerline Powerline (Powerline) Or Powerline Cable (Powerplant)

Transcription

1

2 HOW TO USE THIS MAUAL This manual is organized first by EZ FORM Cable groups and then by the types of RFI connectors available for each group. The connector lists are divided into subgroups by interface type. Each connector listing contains the RFI part number, the description and the materials used for each connector. The materials listings consist of the body, shell, pin/contact, and dielectric. The Cable umber Locator below is supplied for easy cross-referencing by cable part number to page number. Example: You need to know if RFI has an Male Plug for EZ FORM Refer to the table below for EZ FORM Go to page 2. Under the heading for EZ Form , , , , , , , EZ Flex 402, EZ Flex 86 you will find RF SR1. From the description and the materials information you are able to determine if one of these connectors works for your application. The legend on page two explains the material codes used in this manual. Part numbers with an (*) are special order only. If you have special requirements, please contact RF Industries sales department for assistance. Cable Cable Cable umber Locator Cable Cable Cable EZ Flex EZ Flex EZ Flex EZ Flex The information found in this guide was compiled using specifications that were current at the time of compilation. Please note that manufacturer s specifications are subject to change without notice. We therefore suggest that after using this guide to make your initial connector selections, you should obtain the latest product specifications from this cable manufacturer and RF Industries. * Special Order Phone: (800) , (858) ; Fax: (858) Pg. 1

3 EZ FORM & RF IDUSTRIES CABLE TO COECTOR CROSS REFERECE Legend BODY PLATIG SHELL PLATIG PI/COTACT DIELECTRIC C - Chrome C - Black Chrome G Gold B - Bakelite, Dap, Phenolic G Gold G Gold ickel D - Delrin, Polypropylene ickel - ickel S Silver T - PTFE S Silver S - Silver SS - Stainless Steel SS - Stainless Steel EZ Form , , , , , , , RSA Female Jack G --- G T EZ Form , , , , , , , EZ Flex 402, EZ Flex 86 RF SR1 Male Plug G T RF-1022-SR1 Female Rear Mount Bulkhead --- G T RF SR1* Female Rear Mount Bulkhead --- G T TC RFT-1211-SR1* TC Female Bulkhead Jack Front Mount --- G T RFT-1212-SR1* TC Female Crimp Bulkhead Jack w/ Hex Flange & Gasket --- G T RSA Male Plug G G T RSA Male Plug G T RSA Male Plug G SS G T RSA Male Right Angle Plug G G T RSA Male Right Angle Plug G T RSA Female 2-Hole Flange Panel Mount Jack --- G T RSA Female 2-Hole Flange Panel Mount Jack --- G T RSA SR1 Female Jack --- G T RSA-3555-SR1 Female Jack --- G T RSA SR1 Female Rear Mount Jack --- G T RSA Female 4-Hole Flange Panel Mount Jack --- G T SMB RSB-4000-SR1* SMB Crimp Plug --- G T RSB-4010-SR1* SMB Right Angle Crimp Plug --- G T EZ Form , , , , , , , , , , , , , EZ Flex 141, EZ Flex 402 BC RFB SR2* BC Female Crimp Rear Mount Bulkhead Jack --- G T * Special Order Phone: (800) , (858) ; Fax: (858) Pg. 2

4 7/16 Din RFD SR2 7/16 Din Male Plug S S S T RFD SR2* 7/16 Din Female Jack S --- S T RFD SR2 7/16 Din Female 4-Hole Flange Panel Mount Jack S --- S T RFD SR2* 7/16 Din Female Rear Mount Bulkhead Jack w/lockwasher S --- S T & O-Ring RF SR2 Male Plug G T RF SR2 Female 4-Hole Panel Mnt. Solder Jack S --- G T RF-1022-SR2 Female Rear Mount Bulkhead --- G T RF SR2* Female Rear Mount Bulkhead S --- G T RF SR2 Female Solder Jack S --- G T RSA Male Plug G G G T RSA Male Plug G T RSA Male Plug G SS G T RSA Male Right Angle Plug G G G T RSA Male Right Angle Plug G T RSA SR2 Female Jack G --- G T RSA-3555-SR2 Female Jack ---- G T RSA Female Rear Mount Bulkhead Jack --- G T EZ Form , , , , , , /16 DI RFD SR3* 7/16 Din Male Plug S S S T RFD SR3* 7/16 Din Female Jack S --- S T RFD SR3 7/16 Din Female 4-Hole Flange Panel Mount Jack S --- S T RFD SR3* 7/16 Din Female Rear Mount Bulkhead Jack w/ Lock washer S --- S T & O-Ring RF-1022-SR3 Female Rear Mount Bulkhead --- G T RF SR3 Female Solder Jack S --- G T Cable assemblies using any EZ FORM cable with any standard RF connector listed here are available in any specified length with short lead times. All flexible crimp cable assemblies are fabricated with soldered center contacts and adhesive lined shrink tubing for additional cable retention and strain relief. More cable to connector cross references are available which include: Alpha, Antenna Specialist, BICCGeneral, Belden, Carol, Comm/Scope, Cushcraft Ultralink, CCI/Intercomp, Daburn, Dearborn, General/Guardian, GEPCO, Harbour Industries, Haverhill, Manhattan CDT, Micro-Coax, Military, ational, Remee, Saxton, Standard Wire, Thermax CDT, Times Microwave, WestPenn CDT. Regarding any requirement you may have, please contact RF Industries at the following address: 7610 Miramar Road, San Diego, CA (858) (800) Fax: (858) * Special Order Phone: (800) , (858) ; Fax: (858) Pg. 3

5 * Special Order Phone: (800) , (858) ; Fax: (858) Pg. 4