ATS0300 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground, high-accuracy lead screw. Ultra-fine resolution

Transcription

1 Linear Stages Mechanical Bearing, Ball-Screw Stage Precision-ground, high-accuracy lead screw Ultra-fine resolution Crossed-roller bearings for high load capacity and smooth motion Includes cogless, brushless servomotor Compact profile The ATS0300 provides an economical solution for applications requiring fine positioning in a confined area. Construction Features ATS0300 series stages feature bases made from a special alloy aluminum tooling plate for good stiffness and longterm stability. Other high quality features are crossed-roller linear bearings for smooth travel and excellent payload characteristics, a precision-ground lead screw for high accuracy, and Teflon -impregnated hardcoat treated base and table for high resistance to marring and scratching. Table mounting holes have Helicoil TM stainless steel inserts to permit multiple screw insertions without thread wear. The ATS0300 s precision-ground lead screw is available in both metric and English leads. A fine pitch screw results in submicron resolution. Multi-Axis Combinations ATS0300 series stages are easily configured in XY, XZ, or XYZ arrangements. The precision-machined HDZ3 right angle L-bracket is designed for Z-axis applications, and the HDT3 bracket is ideal for lower profile configurations. Options Both metric and English mounting and bolt-hole patterns are available. A large thru-hole aperture version is available that is ideal for applications requiring backlighting. As is the case with all ATS series stages, the ATS03005 may be vacuum prepared to 10-6 torr. s and Drives The standard motor included with the ATS03005 is Aerotech s BMS series brushless, slotless motor. This motor utilizes an ironless design so there is no cogging, which results in no torque ripple throughout the range of motion. Aerotech s amplifiers and controllers range from easy-touse point-to-point indexers to sophisticated multi-axis contouring controllers. Form factors include stand-alone controllers with RS-232 and IEEE-488 interfaces to advanced PC-bus based controllers, to the software-based Automation 3200.

2 SPECIFICATIONS Basic Model ATS03005 Total Travel Drive System Resolution Maximum Travel Speed (1) M aximum Load 50 mm (2 in) Precision Ground Lead Screw 0.5 mm/rev Lead 0.1 µm ( steps/rev Resolutio n in/rev Lead µm ( steps/rev Resolutio n 4 mm/s (0.2 in/s) H orizontal 25.0 kg (55.1 lb) V ertical 9.0 kg (19.8 lb) S ide 9.0 kg (19.8 lb) Accuracy 2. 5 µ m /25 mm (100 µ in/in) Repeatability Straightness & Flatness Nominal Stage Weight Material Finish U nidirectional 0.3 µm (12 µin) B idirectional 1.0 µm (40 µin) 2.5 µm/25 mm (100 µin/in) L ess 1.4 kg (3.1 lb) W ith 2.5 kg (5.5 lb) Aluminu m H ard Coating (62 Rockwell Hardness Teflo n Impregnated ) Note: 1. Payload specifications are for single-axis system and based on lead screw and bearing life of 250 km (10 million inches) of travel. Linear Stages Standard Information Code Type Model Bus Amps Cables /Feedback D river Connector(s) C19801/C18391 (default) Brushless Servo BMS60-A-D25-E1000H up to 160 up to 1.8 up to 7.3 A Cont rms A Peak rms C19360/C18391 C16951/C18391 C17891/C18391 BB501/BA/BAI C18101/C18391 U100Z C13805 DC Servo 1035LT-MSOF-E1000L D 40 up to 4.1 A Cont up to 8.2 A Peak C13803 C13801 C13802 BB501/BA/BAI C15170 U100S C20131 Microstepping 50SMB2-HM 40 up to 1 A C20251 C13410 C15141 U100M Load (kg) Lsc Lvc Load (lb) mm in Distance of Load C.G. from Tabletop L VC and L SC Cantilevered Load Capability (ATS0300) Options include metric or English mounting and large thruhole apertures.

3 DIMENSIONS Linear Stages 62.7 [2.47] 13.5 [0.50] M6-1.0 Thd x 12.7 Dp [1/4-20 Thd x.50 Dp] 21 Holes 12.9 [0.47] 50.8 [2.00] 21.6 [0.85] 50.0 [2.00] Nominal Travel 82.6 [3.25] [4.95] 26.9 [1.06] Aperture (Optional) 25.4 [1.00] Options Length Length BMS (BMS60) [5.21] DC (1035LT-MSOF) [6.23] SM (50SMB2-HM) 84.3 [3.32] *See Section for Alternate s and More Details. Mounting [NEMA 23 Frame] 57.0 [2.25] 33.3 [1.31] Ø6.6 [Ø0.28] 4 Stage Mounting Holes 38.9 [1.53] 59.2 [2.33] 8.6 [0.34] 7.1 [0.28] Basic Model - ATS0300

4 HDZ3 and HDT3 DIMENSIONS HDZ3 Bracket Aperture Optional [0.50] Ø6.6 [Ø0.28] Thru 4 Holes 28.3 [1.13] [0.63] Ø5.6 [Ø0.22] Thru (6) Holes English Only M6 x 1.0 Thd Thru 1/4-20 Thd Thru [3.38] 25 Holes [2.50] [1.63] [4.50] #10-32 Thd Thru (6) Holes English Only [0.88] [0.25] 6.3 [0.25] 38.5 [1.50] 50.0 [2.00] 6.3 [0.25] 30.2 [1.19] 25.0 [1.00] Linear Stages [1.00] 82.6 [3.25] [7.25] 70.7 [2.75] [4.25] 79.5 [3.13] [2.50] 38.1 [1.50] [4.50] Basic Model HDZ [2.00] 8.6 [0.34] Recommended For Series ATS0300 (Linear) Stage & ADR310 & ADR315 (Rotary) Stages 76.2 [3.00] Weight kg [lb] 1.1 [2.4] HDT3 Bracket [6.13] 41.4 [1.63] 1.00 [4.00] 75.0 [3.00] 25.0 [1.00] Ø38.1 [Ø1.50] Aperture Optional 13.5 [0.50] Ø11.1 [Ø0.44] Thru 2 Holes ØM6 x 1.0 Thd Thru [Ø1/4-20 Thd] Thru 25 Holes 12.5 [0.50] 8.9 [0.35] 23.9 [0.94] Ø6.6 [Ø0.28] Thru 15 Holes Basic Model HDT3, HDT3A For ATS0300 Stage - Weight - kg [lb] = 1.2 [2.6]

5 ORDERING INFORMATION Linear Stages Ordering Example ATS M -5 S eries Travel (mm) Stage Construction Options -005 /VAC3 /VAC6 Linear Ball-Screw Stage ATS mm (2 in) travel stage with ground lead screw and limits Stage Construction Options /VAC3 Vacuum preparation of stage to 10-3 torr /VAC6 Vacuum preparation of stage to 10-6 torr Mounting and Grid Pattern -M -U -MA -UA Drive Screw NM Mounting and Grid Pattern -M Metric dimension mounting pattern and holes -U English dimension mounting pattern and holes -MA Metric dimension mounting pattern and holes with aperture tabletop and base -UA English dimension mounting pattern and holes with aperture tabletop and base Drive Screw in/rev drive-screw lead mm/rev drive-screw lead -NM Brushless servomotor with connectors and 1000-line encoder; requires cable (BMS60-A-D25-E1000H/) DC servomotor with connector and 1000-line encoder; requires cable (1035LT-MSOF-E1000LD/) Stepping motor with connector and home marker pulse (one per rev); requires cable (50SMB2-HM/) No motor or encoder Accessories (to be ordered as separate line item) ALIGNMENT-NPA Non-precision XY assembly ALIGNMENT-NPAZ Non-precision XZ or YZ assembly ALIGNMENT-PA10 XY assembly; 10 arc sec orthogonal ALIGNMENT-PA10Z XZ or YZ assembly with L-bracket; 10 arc second orthogonal ALIGNMENT-PA5 XY assembly; 5 arc sec orthogonal ALIGNMENT-PA5Z XZ or YZ assembly with L-bracket; 5 arc second orthogonal HDZ3 English right angle L-bracket HDZ3M Metric right angle L-bracket HDZ3A English right angle L-bracket with aperture HDZ3AM Metric right angle L-bracket with aperture HDT3 English low profile right angle L-bracket HDT3M Metric low profile right angle L-bracket HDT3A English low profile right angle L-bracket with aperture HDT3AM Metric low profile right angle L-bracket with aperture