INNOVATION IN LIFE CYCLE ENGINEERING AND SUSTAINABLE DEVELOPMENT
|
|
- Bernadette Flowers
- 7 years ago
- Views:
Transcription
1 INNOVATION IN LIFE CYCLE ENGINEERING AND SUSTAINABLE DEVELOPMENT
2 Innovation in Life Cycle Engineering and Sustainable Development Edited by DANIEL BRISSAUD Université de Grenoble, France SERGE TICHKIEWITCH Université de Grenoble, France and PEGGY ZWOLINSKI Université de Grenoble, France
3 A C.I.P. Catalogue record for this book is available from the Library of Congress. ISBN (HB) ISBN (HB) ISBN ( e-book) ISBN (e-book) Published by Springer, P.O. Box 17, 3300 AA Dordrecht, The Netherlands. Printed on acid-free paper All Rights Reserved 2006 Springer No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Printed in the Netherlands.
4 Contents Introduction to Innovation in Life Cycle Engineering and Sustainable Development by D. Brissaud, S. Tichkiewitch and P. Zwolinski...ix Integrated Design Centre, 3S Laboratory, University of Grenoble, France...xi Eco-development of products and sustainable manufacturing strategies: The key interests of the Integrated Design Centre by D. Brissaud and P. Zwolinski... xiii Business Models Feasibility and scope of life cycle approaches to sustainable consumption E.G. Hertwich and G.P. Peters...3 A business-oriented approach to the product life cycle G. Molcho and M. Shpitalni...17 Meeting the Climate Change Challenge C. Rynikiewicz...33 Assessing product life cycle strategies in the Japanese market Y. Ogushi, M. Kandlikar and H. Dowlatabadi...49 Applications of service engineering methods and tool to industries T. Sakao, Y. Shimomura, M. Lindahl and E. Sundin...65 End-of-Life Strategies Towards self-disassembling products J.R. Duflou, B. Willems and W. Dewulf...87 Indicators to measure sustainability of an industrial manufacturing E. Raizer Neto, M.T.Mariotte and R.T.P.Hinz...111
5 vi Contents Concepts and definitions for product recovery M. Lindahl, E. Sundin, J. Östlin and M. Björkman Remanufacturing of flat screen monitors C. Franke, S. Kernbaum and G. Seliger Improving product recovery decisions through product information A.K. Parlikad, D.C. McFarlane and A.G. Kulkarni Photocopier remanufacturing at Xerox UK A. King, J. Miemczyk and D. Bufton Dynamic process and operation planning for hybrid disassembly H.-J. Kim Clean technologies for recycling H.V. de Medina Identifying availability contribution of lifecycle-adapted services J. Fleischer and D. Nesges Product Development for Sustainability Designing products that are never discarded P. Zwolinski and D. Brissaud Guidelines in ecodesign: a case study from railway industry J. Lagerstedt and C. Luttropp Identifying and assessing environmentally benign modules M. Voß and H. Birkhofer Strategies and material flow in ecodesign C. Luttropp Screening life cycle modelling for sustainable product design M. Fargnoli and F. Kimura Using design for environment for redesigning a household appliance S. Kara, H. Kaebernick and S. Ibbotson Modular design of technical product-service systems J.C. Aurich, C. Fuchs and C. Wagenknecht...303
6 Contents vii Estimating the environmental profile of early design concepts W. Dewulf, B. Willems and J.R. Duflou Product Life Cycle Management Design for environment by target life cycle costing D. Janz, M. Hornberger and E. Westkämper PLM to support hazard identification in chemical plant design F. Giannini, M. Monti, S. Ansaldi and P. Bragatto Smart machining systems: issues and research trends L. Deshayes, L. Welsch, A. Donmez, R. Ivester, D. Gilsinn, R. Rhorer, E. Whitenton and F. Potra Development of methods to support the implementation of a PDMS J. Feldhusen, B. Gebhardt, N. Macke, E. Nurcahya and F. Bungert The role of knowledge management in product lifecycle G. Colombo and D. Pugliese A product-process-organisation integrative model for collaborative design F. Noël Dynamic life cycle performance simulation of production systems J. Niemann and E. Westkämper LC universal model for the enterprise information system structure A. Bernard, M. Labrousse and N. Perry Authors index...447
7 Introduction to Innovation in Life Cycle Engineering and Sustainable Development This book presents a selection of papers related to the 12th CIRP International conference on Life Cycle Engineering, held at the university of Grenoble, France, in April The CIRP Life Cycle Engineering conference is an annual event and contributes to a continuous updating of research in the field of environmental issues in mechanical engineering, design and manufacturing. The scientific committee members of the conference have selected all the lectures from complete papers, which is the guarantee for the conference of quite an outstanding scientific level. After that, a new selection has been carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Innovation in Life Cycle Engineering and Sustainable Development. The 30 papers in the book, were selected from the 71 papers presented during the conference. Sustainable development is more and more at the core of governments and industries policy. Industrial production and consumption culture are facing dramatic changes due to pollution and waste problems, exhaustion of available non-renewable resources and rapid growth in world population. So, the environmental focus has shifted from production processes to the product's entire life cycle. The potential of technology to create synergies between environmental protection and economic growth has been recognized. Life cycle engineering aims at providing engineering tools targeted towards cleaner product-oriented activities for improving the environment while contributing to competitiveness and growth. It is within this context that the following themes were highlighted during the conference: ix
8 x Introduction Business models, which aims at determining how efficient can be a life cycle strategy from different point of view (customer, policy, environment, economics, ). End of life strategies, presenting recent approaches and technological solutions for end-of life treatments. Product development for sustainability, which aims at showing how designers integrate environmental considerations to improve their solutions. Product life cycle management, dealing with methods and tools to support life cycle considerations. This book is divided into four sections reflecting the above themes and will be of interest to academics, students and practitioners, specializing in environmental issues in mechanical engineering. We hope that you will find it of the greatest interest to compare your various points of view within the field broached throughout the conference. We hope you all enjoy reading this book, which aims to be a reference textbook for all researchers in this particular field and for the teaching staff confronted with training methodologies in integrated design and environment. It will allow you to assess the scope of the development prospects in an extremely wide ranging field. Finally, we would like to highlight the very significant input of the members of the organizing committee for the success of the conference and to express our sincere appreciation to all the authors and to the members of the international program committee. Daniel Brissaud Serge Tichkiewitch Peggy Zwolinski
9 Integrated Design Centre 3S Laboratory University of Grenoble, France The Integrated Design Centre is part of the 3S Research Laboratory sponsored by the technological university of Grenoble (INPG), the scientific university of Grenoble (UJF) and the National Centre for the Scientific Research (CNRS). Objectives For more than ten years, the activity of the Integrated Design Centre has focused on the improvement of engineering design and on the development of mechanical products/systems. New models, methods and computer tools dedicated to Integrated Design into a context of Concurrent Engineering have been developed. This aims at contributing to a better understanding of engineering design and to an improvement of the performance of design considered as a collective activity and a complex process. As seen by the research team, Design is a collaborative and distributed activity, that covers the whole product life cycle. It incorporates analysis as well as synthesis activities. Such a context involves skilled actors having points of view, knowledge and tools, interactions with an organization, shared knowledge, decision-making processes, as well as technologies for cooperation activities, for the multi-representation and for shape generation of a product. The main topics are the product-process integration and the integration of downstream activities within the design process (manufacturing, assembly, recycling, etc.), CAD and geometric modelling, design methodologies and collaborative engineering involving new IT technologies. Research is carried out strongly connected to other disciplines (i.e. industrial sociology, cognitive ergonomics, computer sciences, applied mathematics, etc.). 3 main research directions Methodologies for Integrated Design, Collaborative Engineering, Innovation. This research axis is based on observations conducted on real design processes. On-site studies in companies, experiments about the design activity to set up methodologies for analysing the design process are realised. They lead to methods for incorporating innovative solutions in a design process and they help for the management of the concept of value throughout the design process. Software tools and models for defining the product model and an integrated design environment for multi-actors: network-based, plug and play approaches, are proposed. Some experiments xi
10 xii Integrated Design Center are conducted to characterized synchronous and asynchronous tasks among distant or co-located designers. Concepts for providing common work environments between designers having different skills are proposed. Experiments for the evaluation of software tools used in a collaborative context help to validate these concepts. Product-process integration in design. This second research direction focuses on the formalization of knowledge and on methods related to process and production skills in mechanical design. The different explored fields are manufacturing processes (forging, assembly, machining, process planning, aluminium extrusion, composite materials), end of life processes (disassembly, recycling, re-use), tolerancing. Models for the dynamic behaviour of a machining system to improve the design process, to set up new technologies for the drilling process are examples of detailed contributions whereas concepts of product-process co-development, of product life cycle address a global level of the design process. Development of software demonstrators for product-process integration are realized to help the validation of the proposed approaches. Digital Mock-ups for Integrated Design. This direction is necessary to provide methods for performing shape changes with a digital product models. Geometry simplification, adaptation for design and downstream processes, design data adaptation and idealization for mechanical simulations, free-form shape parameterisation and deformation, shape optimisation, surface mesh generation and adaptation are examples of researches to produce such mock-ups. Methods for knowledge, know-how and services management around digital mock-ups are also addressed through the capitalization, re-use of models concerning mechanical analyses of the products. Thus, new concepts for the use of digital mock-ups in design can be evaluated through the development of software demonstrators and libraries for digital mock-ups of products. The whole team in April Prof. Daniel Brissaud, Prof. Jean-Claude Léon, Dr. Jean-Luc Marcellin, Dr. Philippe M Marin, Dr. Philippe R Marin, Mrs Fadila Messaoud, Dr. Peter Mitrouchev, Dr. Gabriel Moreau, Dr. Frédéric Noel, Dr. Henri Paris, Dr. Frank Pourroy, Dr. Guy Prudhomme, Dr. Guillaume Thomann, Prof. Serge Tichkiewitch, Prof. François Villeneuve, Dr. Peggy Zwolinski. Sabeur Bettaieb, Cyrille Beylier, Vincent Capponi, Vincent Cheutet, Alexandre Ciclet, Lidia Dejeu, Guillaume Drieux, Rosalinda Ferrandes, Gilles Foucault, Alexis Gehin, Okba Hamri, Nizar Haoues, Denis Lovinfosse, El-Hadi Mechekour, Chaiwat Noomtong, Kusol Pimapunsri, Bruno Radulescu, Vincent Riboulet, German Ruiz, Aurélie Vacher, Frédéric Vignat, Omar Zirmi, Said Zirmi.
11 Eco-development of products and sustainable manufacturing strategies The key interests of the Integrated Design Centre The Integrated Design Centre objective is to: promote the change toward sustainable manufacturing paradigms - lifecycle orientation of the manufacturing industries - development of product oriented services increase engineering competence - methods and tools for design and engineering contribute to environmental goals - protection and conservation of natural resources: increase of material life time - clean processes: sustainable protection and consumption practices - eco-product development: optimization of products life cycle This paper aims at presenting the recent and on-going research studies in the field at the Integrated Design Centre. Legislative constraints Design parameters : material, joining techniques, structure, pollution,... Design Wastes - pollution Energy consumption Manufacturing Life cycle Transport Packaging Distribution End of life Remanufacturing - Reuse Energy and material saving Use Maintenance Energy consumption xiii
12 xiv Eco-development of products and sustainable manufacturing strategies Environment and lifecycle product design The optimization of the product life cycle stages needs an integrated definition of the product throughout designing. New environmental objectives lead to support new design situations calling upon new competences, knowledge and tools. It opens the way to research on new design methodologies based on the entire lifecycle of the product, with benefit to the environmental impacts, a clean consumption and a sustainable production, and resulting in an increase of the innovative power of companies. Product Profiles to design remanufacturable products The remanufacturing is an end of life strategy that reduces the use of raw materials and saves energy while preserving the value added during the design and manufacturing processes. But, in most of the cases, remanufacturing processes must be adapted to existing products because products have not been designed to be remanufacturable. However, the process adaptations increase costs and this can lead the overall benefits obtained with the remanufacturing process to be reconsidered. The aim of our research was to propose an approach for the designers to integrate remanufacturing constraints throughout the design process and mainly in the earliest phases. For the product profiles definition, 8 categories of design criteria were identified based on a survey of about thirty products successfully remanufactured. The methodology is supported by REPRO² (REmanufacturig with PROduct PROfiles), a tool developed for a real integrated design of remanufacturable products.
13 Eco-development of products and sustainable manufacturing strategies xv emanufactured products products emanufactured Environmental & Market aspects Durability of parts To reduce the use of natural resources? Profiles of of products products Profiles Structure of the product & quality tests Upgradeable architecture Refurbishment & Valorisation Economic & Technical aspects Energy and materials saving From Integration of remanufacturing constraints during the design process of products, PhD thesis, 2004, Miguel Angel LOPEZ-ONTIVEROS Change in manufacturing industry to support sustainable products A sustainable product is a product which life is extended by partly or entirely re-using for a new life cycle. It contributes to a world where material is used up to its final properties and where energy consumption and wastes are minimized by keeping product added-value in use. It also impacts new ways of consumption. The project aims at examining the necessary condition to transform the industrial organisation to develop and manufacture sustainable products. It focuses on products remanufacturing and reuse strategies and covers the new economic and social paradigm to implement, the environmental impact to minimize and the engineering methodology and tools to develop. From Integrated design of sustainable products, PhD thesis, in progress, Alexis GEHIN
14 xvi Eco-development of products and sustainable manufacturing strategies Environment-based design methodology for innovative products A 2 years observation of the industrial practice has been realised at RENAULT. It was a mean to identify the tools and approaches used in a firm. The aim of the study was to define the industrial concept of recyclability to translate this constraint to the design. Integration resulted in adding Recyclability as constraints equivalent to the usual three industrial constraints - Quality, Delay and Costs to control the development process of a new product. From Integration of the recycling constraint during the design process, PhD thesis, 2000, Thierry GAUCHERON Disassembly for product recycling Recent actions engaged by manufacturers are focused on the recycling rate required by the European Directives on EEE. Along with traditional recycling process as shredding, improving product end-of-life treatment needs the disassembly of the product or part of it. A "Noble" recycling must be managed easily from this. Product disassembly offers new solutions for valorisation: reuse of components, high quality material recycling with better economical indicators and decrease of landfilled wastes. The design work should be assisted by methodologies early in the conceptual design phase of the product and supported by CAD/CAM software identifying and evaluating assembly/disassembly sequences and issues.
15 Eco-development of products and sustainable manufacturing strategies xvii From Development of disassembly methodologies for product end of life: Application to electric and electronic products, PhD thesis in progress, Nizar HAOUES Other studies A new manufacturing paradigm: the extended products and their design, PhD thesis in progress, Nicolas Maussang Trajectories to implement eco-design support in a company practices, PhD thesis in progress, Tatiana Reyes The validation and improvement of a product remanufacturability assessment and design aid, Engineering final project, Jamie O Hare
16 xviii Eco-development of products and sustainable manufacturing strategies Main recent publications Lopez-Ontiveros M.A., Zwolinski P., Brissaud D. Integrated design of remanufacturable products based on product profiles, Journal of Cleaner Production, to be published. Gehin A., Brissaud D., Zwolinski P. Imaging a Tool to Implement Sustainable End-of-Life Strategies in the Product Development Phase, in: Actes du 10ème congrès ERSCP, Anvers ERSCP Maussang N., Brissaud D., Zwolinski P. Design of Product-Service Systems, in: Actes du 10ème congrès ERSCP, Anvers ERSCP Zwolinski P., Prudhomme G., Brissaud D. Environment and design : Toward methods and tools for integration and co-operation, in Methods and tools for cooperative and integrated design, Kluwer Academic Publishers ISBN , , Zwolinski P., Lopez-Ontiveros M.A., Brissaud D. Product end of life characterisation for integrated design, International Journal of Production Engineering and Computers, vol.6, No 7, 85-89, Brissaud D., Zwolinski P. End-of-Life-Based Negotiation Throughout the Design Process, Annals of CIRP, vol 53/1/2004, , Haoues N., Zwolinski P., Cornier A., Brissaud D. How to integrate end of life disassembly constraints in the early design phases? International Journal of Production Engineering and Computers, vol.6, No 7, 59-64, Haoues, N., Froelich, D., Zwolinski, P. Disassembly for Valorization in Conceptual Design. In proceedings of the SPIE : International Conference on Environmentally Conscious Manufacturing IV, Philadelphia, October 2004., Volume 5583, 31-42, Lopez M., Zwolinski P., Brissaud D. Profile of products for the creation of remanufacturable products during the conceptual design phase. Proceedings of CIRP seminar on life cycle engineering 2003, Copenhagen (Denmark), 11p, Prudhomme G., Zwolinski P., Brissaud D. Integrating into the design process the needs of those involved in the product life cycle, Journal of Engineering Design, vol. 14, No 3, , Contact: Daniel.Brissaud@inpg.fr, Peggy.Zwolinski@hmg.inpg.fr
A PLM/KMS integration for Sustainable Reverse Logistics. T. Manakitsirisuthi, Y. Ouzrout, A. Bouras
PLM11 8th International Conference on Product Lifecycle Management 353 A PLM/KMS integration for Sustainable Reverse Logistics T. Manakitsirisuthi, Y. Ouzrout, A. Bouras LIESP-Laboratory - Université Lumière
More informationMeasuring Performance of Reverse Supply Chains in a Computer Hardware Company
Measuring Performance of Reverse Supply Chains in a Computer Hardware Company M.B. Butar Butar, D. Sanders, G. Tewkesbury 1 School of Engineering, University of Portsmouth, Portsmouth, United Kingdom (mde80356@myport.ac.uk)
More informationSubject CT7 Business Economics Core Technical Syllabus
Subject CT7 Business Economics Core Technical Syllabus for the 2016 exams 1 June 2015 Aim The aim of the Business Economics subject is to introduce students to the core economic principles and how these
More informationThe Product Manager s Toolkit
The Product Manager s Toolkit Gabriel Steinhardt The Product Manager s Toolkit Methodologies, Processes and Tasks in High-Tech Product Management ISBN 978-3-642-04507-3 e-isbn 978-3-642-04508-0 DOI 10.1007/978-3-642-04508-0
More informationCAD/ CAM Prof. P. V. Madhusudhan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 03 What is CAD/ CAM
CAD/ CAM Prof. P. V. Madhusudhan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 03 What is CAD/ CAM Now this lecture is in a way we can say an introduction
More informationSAMI Microstar (SAMI MM, MD, MS)
1 ABB Oy 18.2.2000 Product Support TLC/Ari Niskanen SAMI Microstar (SAMI MM, MD, MS) Recycling information for drive of type SAMI Microstar Table of contents TABLE OF CONTENTS...1 1. INTRODUCTION...2 2.
More informationCircular Economy and Life Cycle Management
II Workshop Tecnológico Design for Environment (DfE) SENAI CNI São Paulo - 03/12/2014 Circular Economy and Life Cycle Management Prof. Aldo Roberto Ometto NUMA Research Center > São Carlos Engineering
More informationBig-Data Analytics and Cloud Computing
Big-Data Analytics and Cloud Computing Marcello Trovati Richard Hill Ashiq Anjum Shao Ying Zhu Lu Liu Editors Big-Data Analytics and Cloud Computing Theory, Algorithms and Applications 123 Editors Marcello
More informationSubmarine Cables: The Handbook of Law and Policy
Submarine Cables: The Handbook of Law and Policy Submarine Cables The Handbook of Law and Policy Edited By Douglas R. Burnett Robert C. Beckman Tara M. Davenport LEIDEN BOSTON 2014 Library of Congress
More information16. Product Design and CAD/CAM
16. Product Design and CAD/CAM 16.1 Unit Introduction 16.2 Unit Objectives 16.3 Product Design and CAD 16.4 CAD System Hardware 16.5 CAM, CAD/CAM, and CIM 16.6 Unit Review 16.7 Self Assessment Questions
More informationVDI 2343 Recycling of electrical and electronic equipment Part ReUse
VDI 2343 Recycling of electrical and electronic equipment Part ReUse VDI - Association of German Engineers VDI 1000 Structure of the VDI 2343 Main Aspects of Re-Use Examples Conclusion - Outline - The
More informationEuropean waste policy:
Waste: the problem European waste policy: prevention a dream? EU Waste policy: general principles and summary of legislation Waste Framework Directive - 2008 Waste Electr(on)ical Equipment 2002 and review
More informationImproving Interoperability in Mechatronic Product Developement. Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic
International Conference on Product Lifecycle Management 1 Improving Interoperability in Mechatronic Product Developement Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic PROSTEP AG Dolivostr.
More informationProposal for a RECOMMENDATION OF THE EUROPEAN COMMISSION
EUROPEAN COMMISSION Brussels, XXX [ ] (2013) XXX draft Proposal for a RECOMMENDATION OF THE EUROPEAN COMMISSION Providing minimum principles for the exploration and production of hydrocarbons (especially
More informationPDM/ EDM as Integration Layer for Continous Workflows Based on Relevant Product Data... 1 K.H. Mühleck
Table of Contents User Keynotes PDM/ EDM as Integration Layer for Continous Workflows Based on Relevant Product Data... 1 K.H. Mühleck DMU@Airbus Evolution of the Digital Mock-up (DMU) at Airbus to the
More informationIndustrial and Manufacturing Systems Engineering Collection Development Policy Iowa State University Library
Industrial and Manufacturing Systems Engineering Collection Development Policy Iowa State University Library Table of Contents I. General Purpose II. Profession III. Careers IV. Iowa State University Program
More informationlife cycle design in building design and construction
life cycle management 2007. zurich. 29 august 2007 life cycle design in building design and construction andrea campioli. monica lavagna. politecnico di milano. dipartimento best objective of presentation
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ESCI 101 - INTRODUCTION TO ENVIRONMENTAL SCIENCE
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ESCI 101 - INTRODUCTION TO ENVIRONMENTAL SCIENCE Prepared By: Rajiv Narula, Ph.D. SCHOOL OF SCIENCE, HEALTH, AND CRIMINAL
More informationInnovative Procedures Energy Efficient Environmentally friendly building modules
Innovative Procedures Energy Efficient Environmentally friendly building modules PR.I.M.E3 co-funded by MATTM Italian Ministry of Environment- Call "Energy Efficiency and Use of Renewable Energy Sources
More informationWHY AND HOW THE ENVIRONMENT HAS TO BE TAKEN INTO ACCOUNT AT THE WORLD SUMMIT ON THE INFORMATION SOCIETY, GENEVA 2003 TUNIS 2005
Document WSIS/PC-2/CONTR/43-E 18 December 2002 English only EPFL Working Group on the impact of ICT on the Environment WHY AND HOW THE ENVIRONMENT HAS TO BE TAKEN INTO ACCOUNT AT THE WORLD SUMMIT ON THE
More informationSustainable Development Practices in Higher Education Institutions: A Case of Green Campus Initiatives in Navi Mumbai
Sustainable Development Practices in Higher Education Institutions: A Case of Green Campus Initiatives in Navi Mumbai Dr. N.Mahesh *, Prof. Sachin Mhatre + * Professor & Head, MMS Dept.,ACPCE, Kharghar,New
More informationTITLE 9. HEALTH SERVICES CHAPTER 1. DEPARTMENT OF HEALTH SERVICES ADMINISTRATION ARTICLE 4. CODES AND STANDARDS REFERENCED
TITLE 9. HEALTH SERVICES CHAPTER 1. DEPARTMENT OF HEALTH SERVICES ADMINISTRATION ARTICLE 4. CODES AND STANDARDS REFERENCED R9-1-412. Physical Plant Health and Safety Codes and Standards A. The following
More information(1) DEMEX Consulting Engineers A/S, Denmark Abstract ID Number: 192 Author contacts Authors E-Mail Fax Postal address
INTEGRATED DECONTAMINATION AND REHABILITATION OF BUILDINGS, STRUCTURES AND IN URBAN RENEWAL - A EUROPEAN PROJECT FOR A SUSTAINABLE CITY CONCEPT Inés García Sánchez (1) and Erik K. Lauritzen (1) (1) DEMEX
More informationIntegrating CAD, PLM and LCA: a new architecture & integration proposal
Conference, Lille, 2011 March 23 rd Integrating CAD, PLM and LCA: a new architecture & integration proposal Jean-Pierre THERET DDS Innovation - EcoDesign jeanpierre.theret@3ds.com +33 6 6023 4767 Peggy
More informationEnvironmentally Sound Management of E- waste: Emerging Issues, Challenges and Opportunities for Material Recovery and Recycling
Environmentally Sound Management of E- waste: Emerging Issues, Challenges and Opportunities for Material Recovery and Recycling Dr Sunil Herat Senior Lecturer in Waste Management & Project Leader Griffith
More informationStrategies for Improving the Sustainability of E-Waste Management Systems
Strategies for Improving the Sustainability of E-Waste Management Systems Concept Document Prepared by: The University of Illinois at Urbana-Champaign Sustainable Technology Center 1 Hazelwood Drive Champaign,
More informationFinal Year Projects at itm. Topics 2010/2011
Final Year Projects at itm Topics 2010/2011 Chair of Information Technology in Mechanical Engineering Prof. Dr.-Ing. B. Vogel-Heuser Prof. Dr.-Ing. Frank Schiller Prof. Dr.-Ing. Klaus Bender Technische
More informationFrank Peter Helmus. Process Plant Design. Project Management from Inquiry to Acceptance. Translated by Christine Ahner
Frank Peter Helmus Process Plant Design Project Management from Inquiry to Acceptance Translated by Christine Ahner Frank Peter Helmus Process Plant Design Further Reading Vogel, G. H. Process Development
More informationIndustrial knowledge management using collaborative knowledge acquisition in a consultancy project
of Achievements in Materials and Manufacturing Engineering VOLUME 31 ISSUE 2 December 2008 Industrial knowledge management using collaborative knowledge acquisition in a consultancy project K. Pimapunsri
More informationVolkswagen Aktiengesellschaft strategy for compliance with recycling and recovery rates
Volkswagen Aktiengesellschaft strategy for compliance with recycling and recovery rates Dr. Frank Welsch Head of Technical Development signature see German version Peter Maiwald Head of Sales Service signature
More informationHow To Make A Global Cad/Cam Solution For A Large Company
YOUR GLOBAL CAD/CAM PRODUCTION SOLUTION THE INTEGRATED CAD/CAM/ERP SOLUTION A GLOBAL CAD/CAM SOLUTION Missler Software offers a comprehensive, high-performance software application for all types of machining
More informationCITY UNIVERSITY OF HONG KONG. A Study of Electromagnetic Radiation and Specific Absorption Rate of Mobile Phones with Fractional Human Head Models
CITY UNIVERSITY OF HONG KONG A Study of Electromagnetic Radiation and Specific Absorption Rate of Mobile Phones with Fractional Human Head Models Submitted to Department of Electronic Engineering in Partial
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED CNC MACHINING MET 2740
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED CNC MACHINING MET 2740 Class Hours: 0.0 Credit Hours: 2.0 Laboratory Hours: 6.0 Revised: Fall 06 Catalog Course Description: Advanced
More informationLasers in Restorative Dentistry
Lasers in Restorative Dentistry Giovanni Olivi Matteo Olivi Editors Lasers in Restorative Dentistry A Practical Guide Editors Giovanni Olivi Rome Italy Matteo Olivi Rome Italy ISBN 978-3-662-47316-0 DOI
More informationPost-Graduate Training in Renewable Energies at Kassel University
Proc. EuroSun '04, Freiburg (DE), 24. - 26.6.04, CD Post-Graduate Training in Renewable Energies at Kassel University K. Vajen*, F. Kininger #, R.-M. Lüking ~ Universität Kassel, D-34109 Kassel * Institut
More informationIndustry Software Driving the Digital Enterprise. siemens.com/industry-software
Industry Software Driving the Digital Enterprise siemens.com/industry-software Digitalization is revolutionizing our economy Business is becoming more and more impacted by digitalization. Customers are
More informationThis is a sample chapter from A Manager's Guide to Service Management. To read more and buy, visit http://shop.bsigroup.com/bip0005 BSI British
A Manager s Guide to Service Management A Manager s Guide to Service Management Jenny Dugmore Shirley Lacy First published in the UK in 1995 by BSI, 389 Chiswick High Road, London W4 4AL Second edition
More informationLow Carbon Emission Supply Network Design and a case in Chinese ICT industry
Low Carbon Emission Supply Network Design and a case in Chinese ICT industry Jialun Hu Centre for International Manufacturing Institute for Manufacturing, University of Cambridge jh693@cam.ac.uk Outline
More informationRARITAN VALLEY COMMUNITY COLLEGE ACADEMIC COURSE OUTLINE. ENVI-102: Environmental Science and Sustainability
I. Basic Course Information RARITAN VALLEY COMMUNITY COLLEGE ACADEMIC COURSE OUTLINE ENVI-102: Environmental Science and Sustainability A. Course Number and Title: ENVI-102: Environmental Science and Sustainability
More informationUCD School of Agriculture Food Science & Veterinary Medicine Master of Engineering Science in Food Engineering Programme Outline
Module Details BSEN30010 Bioprocess Principles BSEN30240 Waste Management BSEN40030 Advanced Food Refrigeration Module Description In this module you will be introduced to some of the fundamental theories
More information480152 - DSPS - Sustainable Design of Products and Services
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2015 480 - IS.UPC - University Research Institute for Sustainability Science and Technology 729 - MF - Department of Fluid Mechanics
More informationHUGO BOSS ENVIRONMENTAL COMMITMENT. Our claim. Our approach
HUGO BOSS ENVIRONMENTAL COMMITMENT HUGO BOSS assumes responsibility for future generations. This entails that we also pursue our high standards for quality and performance in environmental protection.
More informationINTEGRATION OF ENGINEERING PROCESS MODELING BETWEEN ENGINEERING DESIGN BOM AND MANUFACUTURING BOM BASED ON PRODUCT LIFECYCLE MANAGEMNT
INTEGRATION OF ENGINEERING PROCESS MODELING BETWEEN ENGINEERING DESIGN BOM AND MANUFACUTURING BOM BASED ON PRODUCT LIFECYCLE MANAGEMNT Kinya Tamaki, School of Business Administration, Aoyama Gakuin University,
More informationULUDAĞ UNIVERSITY INSTITUTE OF SCIENCE ENVIRONMENTAL ENGINEERING 2013-2014 ACADEMIC YEAR INSTITUTE REQUIRED COURSES
GRADUATE PROGRAM ULUDAĞ UNIVERSITY ENVIRONMENTAL ENGINEERING 2013-2014 ACADEMIC YEAR INSTITUTE REQUIRED COURSES DOCTORAL PROGRAM OF Code Course Title T U L Credit ECTS Prerequisite Code Course Title T
More informationWeb Service Platform for Engineering Design Optimization of a Mechatronic Multi-parts Component
Web Service Platform for Engineering Design Optimization of a Mechatronic Multi-parts Component R. Ben Mosbah 1, S. Dourlens 1, A. Ramdane-Cherif 1, N. Levy 2, F. Losavio 3 1 LISV, Université de Versailles,
More informationSTEWARDSHIP ETHICS IN DEBT MANAGEMENT
STEWARDSHIP ETHICS IN DEBT MANAGEMENT Issues in Business Ethics VOLUME 12 Series Editors Henk van Luijk, Nijenrode, Netherlands of Business, Breukelen, The Netherlands Patricia Werhane, University of Virginia,
More informationCimatronE Version 8.0 A Product Review Summary
CimatronE Version 8.0 A Product Review Summary August 2006 A CIMdata Review CimatronE Version 8.0 A Product Review Summary August 2006 Prepared by CIMdata Copyright 2006 by Cimatron Ltd. and CIMdata,
More informationSource Reduction, on-site handling and processing of Solid waste. CE 431: Solid Waste Management
Source Reduction, on-site handling and processing of Solid waste CE 431: Solid Waste Management Functional Elements of Waste Management System Source Reduction/Waste Minimization First element of any waste
More informationUnited Nations Environment Programme Division of Technology, Industry and Economics Sustainable Consumption and Production Branch. Waste Minimization
United Nations Environment Programme Division of Technology, Industry and Economics Sustainable Consumption and Production Branch Waste Minimization Work Plan 2012-2013 Update August 2012 WASTE MINIMIZATION
More informationShimmush Tehillim, Tehillim, Psalms 151-155 and Their Kabbalistic Use
Shimmush Tehillim, Tehillim, Psalms 151-155 and Their Kabbalistic Use Your purchase helps us to sponsor a new translation Shimmush Tehillim, Tehillim, Psalms 151-155 and Their Kabbalistic Use Edited by
More informationComp-AC. ENVIRONMENTAL INFORMATION Recycling instructions for drive of type ACS 200. ABB Oy Product Support 12.11.1998 TLC/Ari Niskanen
1 ABB Oy Product Support 12.11.1998 TLC/Ari Niskanen Comp-AC ENVIRONMENTAL INFORMATION Recycling instructions for drive of type ACS 200 Table of contents 1. Introduction 2. Product package 3. Product materials
More informationIntroduction to. Aalborg s Sustainability Strategy 2013-2016
Introduction to Aalborg s Sustainability Strategy 2013-2016 2 Foreword Aalborg should be a sustainable municipality, which will be to the benefit of local citizens, businesses and the environment. With
More informationEffective Methods for Software and Systems Integration
Effective Methods for Software and Systems Integration Boyd L. Summers CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 CRC Press is an imprint of Taylor
More informationPotential of Computerized Maintenance Management System in Facilities Management
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XXI, NR. 1, 2014, ISSN 1453-7397 Noor Farisya Azahar, Md Azree Othuman Mydin Potential of Computerized Maintenance Management System in Facilities Management
More informationDeveloping an Imaging Software for Automated Recycling Processes (Phase 1) SIMOLOWO Emmanuel Oluwafunbi 1,a and Mousavi Ali 2,b
Advanced Materials Research Vol. 628 (2013) pp 292-297 (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/amr.628.292 Developing an Imaging Software for Automated Recycling Processes
More informationSpringerBriefs in Criminology
SpringerBriefs in Criminology More information about this series at http://www.springer.com/series/10159 Wesley G. Jennings Rolf Loeber Dustin A. Pardini Alex R. Piquero David P. Farrington Offending
More informationContemporary Logistics. Research on Factors that Affect the Eco-efficiency of Remanufacturing Closed-loop Supply Chain
Contemporary Logistics 02 (2011) 1838-739X Contents lists available at SEI Contemporary Logistics journal homepage: www.seiofbluemountain.com Research on Factors that Affect the Eco-efficiency of Remanufacturing
More informationAre Lean and Green Programs Synergistic?
Proceedings of the 2009 Industrial Engineering Research Conference Are Lean and Green Programs Synergistic? Gary G. Bergmiller, PhD Zero Waste Operations Research and Consulting Boulder, CO 80503, USA
More informationTable of Contents. Preface. Chapter 1 Introduction 1.1 Background. 1.2 Problem description. 1.3 The role of standardization. 1.4 Scope and objectives
Table of Contents Table of Contents Preface Chapter 1 Introduction 1.1 Background 1.2 Problem description 1.3 The role of standardization 1.4 Scope and objectives 1.5 Approach 1.6 Related work 1.7 General
More informationCharacterizing Sustainable Mechanical Engineering
Characterizing Sustainable Mechanical Engineering by Richard C. rcc102@psu.edu School of Science, Engineering, and Technology The Pennsylvania State University Harrisburg Abstract To the informed, sustainable
More informationFLORIDA STATE COLLEGE AT JACKSONVILLE NON-COLLEGE CREDIT COURSE OUTLINE. Insurance Customer Service Representative
Form 2B, Page 1 FLORIDA STATE COLLEGE AT JACKSONVILLE NON-COLLEGE CREDIT COURSE OUTLINE COURSE NUMBER: RMI 0093 COURSE TITLE: PREREQUISITE(S): COREQUISITE(S): Insurance Customer Service Representative
More informationPMP Certification Exam Prep Bootcamp
Commitment / Vision / Results SM Toll Free (US): (800) 877-8129 Office: (919) 495-7371 Fax: (919) 556-0283 Email: info@cvr-it.com Web site: www.cvr-it.com Course Overview PMP Certification Exam Prep Bootcamp
More informationCATIA V5R21 - FACT SHEET
CATIA V5R21 - FACT SHEET Introduction What s New at a Glance Overview Detailed Description INTRODUCTION CATIA V5 is the leading solution for product success. It addresses all manufacturing organizations;
More informationWindchill PDMLink 10.2. Curriculum Guide
Windchill PDMLink 10.2 Curriculum Guide Live Classroom Curriculum Guide Update to Windchill PDMLink 10.2 from Windchill PDMLink 9.0/9.1 for the End User Introduction to Windchill PDMLink 10.2 for Light
More informationCORPORATE LEARNING MODEL IN THE FUNCTION OF ENVIRONMENTAL PROTECTION
NATURA MONTENEGRINA, Podgorica, 9(3):957-972 CORPORATE LEARNING MODEL IN THE FUNCTION OF ENVIRONMENTAL PROTECTION Vesna N I K O L I Ć 1 and Sanja DANKOVIĆ 2 1 Faculty of Occupational Safety in Nis, University
More informationMinistry of Education and Sports
The Republic of Uganda Ministry of Education and Sports TECHNICAL DRAWING TEACHING SYLLABUS Uganda Certificate of Education Senior 1-4 National Curriculum Development Centre P.O. Box 7002 Kampala - Uganda
More informationCIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference
More informationMusic Business Lecturers Oxford, UK Seeking Part-time and casual appointments
Music Business Lecturers Oxford, UK Seeking Part-time and casual appointments SAE Institute is a leading global provider of education for creative media industries with a current network of over 50 Colleges
More informationFundamentals of the Craft in Theory and Practice. Patrick O. Connelly
Trade Credit Risk Management Fundamentals of the Craft in Theory and Practice Patrick O. Connelly Preface (abbreviated) This book incorporates the learning and worldwide experiences drawn from the author
More informationLORD CHANCELLOR S CODE OF PRACTICE ON THE MANAGEMENT OF RECORDS UNDER
LORD CHANCELLOR S CODE OF PRACTICE ON THE MANAGEMENT OF RECORDS UNDER SECTION 46 OF THE FREEDOM OF INFORMATION ACT 2000 NOVEMBER 2002 Presented to Parliament by the Lord Chancellor Pursuant to section
More informationCUSTOMER ONLINE PURCHASE INTENTION TOWARDS AIRLINE E-TICKETING IN KLANG VALLEY CHEW YUH YIING CHONG CHOOI SUN MICHELLE SIM KAI FERN YONG SOOK HUOI
CUSTOMER ONLINE PURCHASE INTENTION TOWARDS AIRLINE E-TICKETING IN KLANG VALLEY BY CHEW YUH YIING CHONG CHOOI SUN MICHELLE SIM KAI FERN YONG SOOK HUOI A research project submitted in partial fulfillment
More informationTHE INTEGRATED CAD/CAM SOLUTION FOR THE WOOD INDUSTRY THE INTEGRATED CAD/CAM/ERP SOLUTION
THE INTEGRATED CAD/CAM SOLUTION FOR THE WOOD INDUSTRY THE INTEGRATED CAD/CAM/ERP SOLUTION ONE CAD/CAM SOLUTION AND ONE PROFESSION: WOOD TopSolid Wood is both a very powerful CAD/CAM solution, and a dedicated
More informationElectrical Engineering Department Program specification
جام عة الم نوف ية كلية الهندسة بشبين الكوم Faculty of Engineering Undergraduate Programs Electrical Engineering Department Program specification I. Basic information: Program name Electrical Power and
More informationU.S. Department of Agriculture Rural Utilities Service
According to the Paperwork Reduction Act of 1995, an agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a valid OMB control number.
More informationA CAD-BASED SOFTWARE FRAMEWORK FOR ESTIMATING ENERGY THROUGH A PRODUCT LIFE CYCLE HE HUANG
A CAD-BASED SOFTWARE FRAMEWORK FOR ESTIMATING ENERGY THROUGH A PRODUCT LIFE CYCLE By HE HUANG A dissertation submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY
More informationA Contribution to Expert Decision-based Virtual Product Development
A Contribution to Expert Decision-based Virtual Product Development László Horváth, Imre J. Rudas Institute of Intelligent Engineering Systems, John von Neumann Faculty of Informatics, Óbuda University,
More informationShould Costing Version 1.1
Should Costing Identify should cost elements early in the design phase, and enable cost down initiatives Version 1.1 August, 2010 WHITE PAPER Copyright Notice Geometric Limited. All rights reserved. No
More informationPRODUCT SERVICE SYSTEMS: EXPLORING THE POTENTIAL FOR ECONOMIC AND ENVIRONMENTAL EFFICIENCY ECON 4545. Prof. Edward Morey.
PRODUCT SERVICE SYSTEMS: EXPLORING THE POTENTIAL FOR ECONOMIC AND ENVIRONMENTAL EFFICIENCY ECON 4545 Prof. Edward Morey Desirée Pacheco December 17, 2003 Abstract Product Service Systems (PSS) is a business
More informationOur Kids Information Technology Department IT Backup and Restore Procedure
1 of 7 Our Kids Information Technology Department IT Backup and Restore Procedure I. Policy/Purpose: This Policy describes Our Kids of Miami-Dade/Monroe, Inc. (Our Kids) Information Technology (IT) Department
More informationGreening Our Future By Educating Tomorrow s Workforce. Module 2: Lean Manufacturing and the Environment
Greening Our Future By Educating Tomorrow s Workforce Module 2: Lean Manufacturing and the Environment 11/16/2011 Module 2: Lean Manufacturing and the Environment What You Will Learn From This Module:
More informationARIS Design Platform Getting Started with BPM
Rob Davis and Eric Brabander ARIS Design Platform Getting Started with BPM 4y Springer Contents Acknowledgements Foreword xvii xix Chapter 1 An Introduction to BPM 1 1.1 Brief History of Business Process
More informationsuperseries FIFTH EDITION
Prelims-I046413.qxd 3/19/07 1:04 PM Page i Institute of Leadership & Management superseries Motivating to Perform in the Workplace FIFTH EDITION Published for the Institute of Leadership & Management AMSTERDAM
More informationTHE APPLICATION OF THE ECODESIGN PILOT AND METHODICAL SUPPORT FOR THE IMPLEMENTATION OF ECODESIGN IN PRODUCTS
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2002 Dubrovnik, May 14-17, 2002. THE APPLICATION OF THE ECODESIGN PILOT AND METHODICAL SUPPORT FOR THE IMPLEMENTATION OF ECODESIGN IN PRODUCTS W.Wimmer, R.Züst
More informationThis page has been left blank intentionally
Project Governance This page has been left blank intentionally Project Governance Ralf Müller PM Concepts, Sweden Ralf Müller 2009 All rights reserved. No part of this publication may be reproduced, stored
More informationAgile Manufacturing for ALUMINIUM SMELTERS
Agile Manufacturing for ALUMINIUM SMELTERS White Paper This White Paper describes how Advanced Information Management and Planning & Scheduling solutions for Aluminium Smelters can transform production
More informationTHE OPEN UNIVERSITY OF TANZANIA
THE OPEN UNIVERSITY OF TANZANIA FACULTY OF SCIENCE, TECHNOLOGY AND ENVIRONMENTAL STUDIES ODM 103: INTRODUCTION TO COMPUTER PROGRAMMING LANGUAGES Said Ally i ODM 103 INTRODUCTION TO COMPUTER PROGRAMMING
More informationCHAPTER 1. Introduction to CAD/CAM/CAE Systems
CHAPTER 1 1.1 OVERVIEW Introduction to CAD/CAM/CAE Systems Today s industries cannot survive worldwide competition unless they introduce new products with better quality (quality, Q), at lower cost (cost,
More informationEnergy-Efficient Electric Motors and Their Applications. Second Edition
Energy-Efficient Electric Motors and Their Applications Second Edition Energy-Efficient Electric Motors and Their Applications Second Edition Howard E. Jordan Springer Science+ Business Media, LLC Library
More informationStrategic approach and programme design: the case of Denmark
This series of informative fiches aim to present, in summary, examples of practices and approaches that EU Member States and Regions have put in place in order to implement their rural development programmes
More informationMethods and Tools for Effective Knowledge Life-Cycle-Management
Methods and Tools for Effective Knowledge Life-Cycle-Management Bearbeitet von Alain Bernard, Serge Tichkiewitch 1. Auflage 2008. Buch. X, 586 S. Hardcover ISBN 978 3 540 78430 2 Format (B x L): 15,5 x
More informationCore Training Quick Reference Guide Version 2.0
Core Training Quick Reference Guide Version 2.0 Page 1 of 34 Contents Changes from Previous Version... 3 Introduction... 5 Guidance for Professional Users based in Colleges/ Schools/ Departments... 5 Logging
More informationBrussels, 4 September 2001. European Cooperation in the field of Scientific and Technical Research - COST - Secretariat ------- COST 279/01
European Cooperation in the field of Scientific and Technical Research - COST - Secretariat ------- Brussels, 4 September 2001 COST 279/01 DRAFT MEMORANDUM OF UNDERSTANDING Subject : Draft Memorandum of
More informationMaster Program SUSTAINABLE ENGINEERING IN PRODUCTION
Master Program SUSTAINABLE ENGINEERING IN PRODUCTION Sustainable engineering in Production Sustainable development is defined as Meeting the needs of the present without compromising the ability of future
More informationPrescriptions and Schedule of Papers for 2008
Prescriptions and Schedule of Papers for 2008 Mode of Delivery * = Not available in 2008 B1, B2, B3 = Available as a block course E, E1, E2 = Available extramurally F1 = Face to face teaching I, I1, I2,
More informationIssues Paper 3: SMEs and Green Growth: Promoting sustainable manufacturing and eco-innovation in small firms
OECD WORKING PARTY ON SMES AND ENTREPRENEURSHIP (WPSMEE) BOLOGNA+10 HIGH-LEVEL MEETING ON LESSONS FROM THE GLOBAL CRISIS AND THE WAY FORWARD TO JOB CREATION AND GROWTH PARIS, 17-18 NOVEMBER 2010 Issues
More informationInternational environmental governance. Bali Strategic Plan for Technology Support and Capacity-building
UNITED NATIONS UNEP/GC.23/6/Add.1 EP Governing Council of the United Nations Environment Programme Distr.: General 23 December 2004 Original: English Twenty-third session of the Governing Council/ Global
More informationCultivating Agricultural Information Management System Using GIS Technology
Hitachi Review Vol. 58 (2009), No. 6 265 Cultivating Agricultural Information Management System Using GIS Technology Improving Agricultural Efficiency through Information Technology Osamu Nishiguchi Noriko
More informationSW 393S1 & 360K - Introduction to Human Services Administration Spring 2002
SW 393S1 & 360K - Introduction to Human Services Administration Spring Course Number: SW 309R10/360K Instructors: Professor Michael Lauderdale Unique No.: 58605/58805 Office Number: SWB 3.130J Semester:
More informationCleaner Production as a Graduate Level Energy and Environmental Engineering and Management Course at AIT
Cleaner Production as a Graduate Level Energy and Environmental Engineering and Management Course at AIT C. Visvanathan and S. Kumar School of Environment. Resources and Development, Asian Institute of
More informationDevelopments and trends shaping the future for Waste-to- Energy technology suppliers
Developments and trends shaping the future for Waste-to- Energy technology suppliers 21 st October 2015 Copenhagen, Denmark Edmund Fleck ESWET President 2 Contents 1. About ESWET 2. Introduction 3. Modern
More information