L Series. UL Recognized CSA Certified. Specifications. L Series. Part Numbers. Impedance in Ohms. CORCOM Product Guide
|
|
|
- Simon Weaver
- 7 years ago
- Views:
Transcription
1 Inductive Filtering Modular RJ Jacks L Series UL Recognized CSA Certified RJ RJ with Block Filter RJ with Sleeve Filter RJ L Series Inductive filtering in a direct retrofit to standard unfiltered RJ, RJ, or handset jacks. Offered with standard ferrite sleeve inductors or higher performance ferrite blocks, the L series is available with or without a shield. Inductor Filter RJH-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B Inductor Filter and Shield RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B RJ-L-S RJ-L-B Specifications Contacts: Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (00 mating cycles) Ferrites: Type: Sleeves: Block: Shield Material: Housing Material: Dielectric Withstanding Voltage: Line-to-line and line-to-ground Printed Circuit Board Retention: Before soldering: After soldering: Phosphor Bronze 0 microinches gold 00 microinches nickel 0 milliohms max. 0 milliohms max. High resistivity, nickel zinc ceramic Single-aperture cylinders Multi-aperture rectangular prism Tin-plated copper alloy Glass-filled polyester (UL9V-0) Model dimensions and PC board layout on pages 0 to. Typical Impedance in Ohms Impedance in Ohms VAC for 0 seconds lb. minimum 0 lb. minimum Signal Line Products Shield Shield Frequency in MHz See page for the CORCOM new low profile RJ Jacks. Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
2 L Series - Ganged Version L - Ganged Series RJ UL Recognized CSA Certified RJ RJ with Block Filter L - Ganged Series Ganged version of our L series filtered jacks. Available in RJ models with block inductors in gangs of,, or. Retrofits existing unfiltered ganged jack footprints. Typical Impedance in Ohms Impedance in Ohms Frequency in MHz Model Dimensions and PC Board Layout.0.9 A.00. Specifications Contacts: Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (00 mating cycles) Ferrites: Type: Block: Housing Material: Dielectric Withstanding Voltage: Line-to-line and line-to-ground Printed Circuit Board Retention: Before soldering: After soldering: Phosphor Bronze 0 microinches gold 00 microinches nickel 0 milliohms max. 0 milliohms max. High resistivity, nickel zinc ceramic Multi-aperture rectangular prism Glass-filled polyester (UL9V-0) 000 VAC for 0 seconds lb. minimum 0 lb. minimum...00 [.] B C RJ-L-B RJ-L-B RJ-L-B.0.0 [.9] [.] D Ports A B C D Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
3 Model Dimensions Standard Profile RJ Jack Dimensions For the L, LC, LCT and X Series of RJ Jack Filters RJ (No Shield) RJ (Style Shield) RJ-L-S RJ-L-B RJ-X RJ-L-S RJ-L-B RJ-X RJ-L-S RJ-L-B RJ-X RJ-LC-S RJ-LC-S RJ-LC-S RJ-LC-B RJ-LC-B RJ-LC-B RJ-L-S RJ-L-S RJ-L-B RJ-L-B RJ-LCT-S RJ-LCT-B RJ (Style Shield) RJ (PC Board Layout) For all RJ L, LC, LCT and X Series Models RJ-LC-S RJ-LC-S RJ-LC-S RJ-LC-B RJ-LC-B RJ-LC-B RJ-L-S RJ-L-S RJ-L-B RJ-L-B RJ-LCT-S RJ-LCT-B Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
4 Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters RJ (No Shield) RJ (Style Shield) RJ-L-S RJ-L-S RJ-L-B RJ-L-B RJ-X RJ-X RJ-LC-S RJ-L-S RJ-LCT-S RJ-LC-S RJ-L-S RJ-LCT-B RJ-LC-B RJ-L-B RJ-LC-B RJ-L-B RJ (Style Shield) RJ (PC Board Layout) For all RJ L, LC, LCT and X Series Models..0±.00.9±.0 ( PLACES) / /-.0 ( PLACES).00. ( SPACES) ±.00.±.0 ( PLACES) Signal Line Products RJ-LC-S RJ-L-S RJ-LCT-S RJ-LC-S RJ-L-S RJ-LCT-B RJ-LC-B RJ-L-B RJ-LC-B RJ-L-B RJ-LC-S RJ-L-S RJ-LCT-B RJ-LC-S RJ-L-S RJ-LCT-S RJ-LC-B RJ-L-B RJ-LC-B RJ-L-B Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
5 Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters Low Profile RJ Jack Dimensions For the N and Z Series of RJ Jack Filters RJH (No Shield) RJ (Low Profile - No Shield) RJH--L-B RJ-N-B RJ-N-S RJ-Z RJH (No Shield - PC Board Layout) RJ Low Profile (Style Shield).00. Edge of board / /-.0 ( holes).00. ( Spaces).90. Max..* ±.00.±.0 ( holes).0.9 All tolerances ±0.00 [0.] unless otherwise noted. RJ-N-B RJ-N-S RJ-Z *To top of shield Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
6 Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ Low Profile (Style Shield) RJ Low Profile (No Shield).90. Max * RJ-N-B RJ-N-S RJ-Z RJ-N-B RJ-N-S RJ-Z RJ Low Profile (PC Board Layout) RJ Low Profile (Style Shield).0±.00.9±.0 ( PLACES) ±.00.±.0 ( HOLES) For all RJ N and Z Series Models / /-.0 ( PLACES).00 ( SPACES) Max...* Signal Line Products RJ-N-B RJ-N-S RJ-Z *To top of shield Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
7 Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ Low Profile (Style Shield) * RJ-N-B RJ-N-S RJ-Z *To top of shield RJ Low Profile (PC Board Layout).0±.00.9±.0 ( Places) / /-.0 ( Places).00 ( Spaces)..00..±.00.±.0 ( Places) For all RJ N and Z Series Models All tolerances ±0.00 [0.] unless otherwise noted. Catalog 00 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: Revised 0-0 millimeters unless otherwise reference purposes only. CORCOM Prods: specified. Values in italics Specifications subject Germany:
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
AMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
PCI EXPRESS CARD EDGE G630E Series
GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
PRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
AMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
Connector System for Universal Serial Bus (USB)
Product Facts Plug and Play capability Hot pluggable, permits attaching or detaching peripherals without power down or reboot Single 4-position connector, polarized for proper orientation Complete family
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
PC/104 Specification
PC/104 Embedded Consortium www.pc104.org PC/104 Specification Version 2.6 October 13, 2008 Please Note This specification is subject to change without notice. While every effort has been made to ensure
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
TEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
Catalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
EH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
Index. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
PCb Cable mount twinax. ConneCtorS
PCb Cable mount twinax ConneCtorS technical CharaCteriStiCS SPeCiFiCationS temperature rating: -55 C to + 125 C Corrosion: MIL-STD-202 Method 101, Test Condition B Shock: MIL-STD-202 Method 213, Test Condition
Product Name Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz
Anam PA.25a Specification Part No. PA.25a Product Name Anam Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz Feature High Efficiency Multi-Band
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
www.tvsat.com.pl COAXICON Series Mobile Phone Switching Coax Connectors RF Coax Connectors Product Facts
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
10/100BASE-T Copper Transceiver Small Form Pluggable (SFP), 3.3V 100 Mbps Fast Ethernet. Features. Application
Features Compliant with IEEE 802.3u standard Link distance at 100Mbps: up to 100m per IEEE802.3 EEPROM with serial ID functionality Detailed product information in EEPROM Industry standard small form pluggable
Ethernet Cat 5e & Cat 6 Patch Panels
Ethernet Cat e & Cat Patch Panels Copper :: RJ/IDC Models EPPE-CTE & EPPE-CAT User Manual Applys to : EPPE-CTE :: EPPE-CAT Telect, Inc., All Rights Reserved, 9- A0.09.9.000 :: telect.com Ethernet Cat e
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: PCI/PCI-X Connector Contact Finish Changes DATE: January 7, 2003 (first submitted, and subsequently improved) AFFECTED DOCUMENT: PCI revision 2.3 and PCI revision
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
A Division Of AVX Corporation. DIN Connectors
A Division Of AVX Corporation DIN Connectors Index by DIN Style Introduction & Applications 4 Press-Fit 7 Design Aids 8 Approvals 8 Technical Specifications 11 Plating 12 Military Cross Reference 12 STYLE
MICRO SFP+ CONNECTOR & CABLE ASSEMBLY
MICRO SFP+ CONNECTOR & CABLE ASSEMBLY micro SFP+ Connector and Cable Assembly TE Connectivity s (TE) micro SFP+ connector and cable assembly empower you to dream big when designing your communication system.
ZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
RF Connector Solutions
RF Connector Solutions C o n n e c t i n g I n n o v a t i o n t o A p p l i c a t i o n Winchester Electronics was established in 1941 and is today a global leader in the design, development, and deployment
Figure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications
This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.
Size 20 Contacts Solder and Crimp Removable. Military Quality and Severe Industrial Environmental Applications. Environmental-D Series
Environmental-D MILITRY QULITY, REMOVLE CONTCT, SUMINITURE-D CONNECTORS FOR MILITRY ND SEVERE INDUSTRIL ENVIRONMENTL PPLICTIONS Size 20 Contacts Solder and Crimp Removable Military Quality and Severe Industrial
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Standard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
6 U CompactPCI Backplane with 8 Slots
6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI
Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header 2 2 Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
STF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
Interface RF Connector with Switch
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
CURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X
CURRENT TRANSFORMER MODEL 546 1.10" I.D. PAGE No 1-38 REV 15DEC00 TERMINAL OPTION LEAD WIRE OPTION 1.10 0 1.20 2.55 3.00 3.47 0.18 x 0.31 SLOT ( 2 PLACES) 8-32 BRASS STUD (2 PLACES) UL1015 #16 AWG LEAD
CUSTOM MICRO-D SOLUTIONS
CUSTOM MICRO-D SOLUTIONS CUSTOM DESIGN CONNECTORS Custom design connectors................................ 206 Materials & finishes.................................... 207 69 and 74 way Micro-D connectors........................
Capacitor Self-Resonance
Capacitor Self-Resonance By: Dr. Mike Blewett University of Surrey United Kingdom Objective This Experiment will demonstrate some of the limitations of capacitors when used in Radio Frequency circuits.
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
FullAXS CONNECTOR SEALING & CABLE ASSEMBLY
FullAXS CONNECTOR SEALING & CABLE ASSEMBLY System Solution Guide Next Generation x-tta Solution Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-tta) connectivity
SMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and
0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
12S, 14S, 15S Series. Time Delay Relays and Sequencers. Time Delay Relays and Sequencers. Features and Benefits. Switch Actions and Configurations
12S, 14S, 15S Series Time Delay Relays and Sequencers Time Delay Relays and Sequencers The Therm-O-Disc type 12S, 14S and 15S series time delay relays and sequencers are field-proven devices for controlling
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
Application Note AN:005. FPA Printed Circuit Board Layout Guidelines. Introduction Contents. The Importance of Board Layout
FPA Printed Circuit Board Layout Guidelines By Paul Yeaman Principal Product Line Engineer V I Chip Strategic Accounts Introduction Contents Page Introduction 1 The Importance of 1 Board Layout Low DC
FEATURES. Catalog C-031 Rev. H
FEATURES Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant Catalog C-031 Rev. H - The Leader in Power Connector Solutions
PCI-104 Specification
PCI-104 Specification Version 1.0 November 2003 Please Note This specification is subject to change without notice. While every effort has been made to ensure the accuracy of the material contained within
SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control
Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response
General Specifications
General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Current and Temperature Ratings
Document 361-1 Current and Temperature Ratings Introduction This application note describes: How to interpret Coilcraft inductor current and temperature ratings Our current ratings measurement method and
This application note is written for a reader that is familiar with Ethernet hardware design.
AN18.6 SMSC Ethernet Physical Layer Layout Guidelines 1 Introduction 1.1 Audience 1.2 Overview SMSC Ethernet products are highly-integrated devices designed for 10 or 100 Mbps Ethernet systems. They are
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
General-purpose Relay
General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
FCI Connectors for Fine Pitch Mezzanine Solutions
FCI Connectors for Fine Pitch Mezzanine Solutions www.ttieurope.com CONAN 1.0 mm Connectors BERGSTAK 0.8 mm Connectors MEZZOSTAK 0.5 mm Connectors TTI, Inc. - Never Short on Solutions FCI FINE PITCH MEZZANINE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 123 2011
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 123 2011 Specification for F Connector, Male, Feed-Through NOTICE The Society of Cable Telecommunications Engineers
Standards Affecting a Premise T-1 Installation
Standards Affecting a Premise T-1 Installation The T-carrier system originated many years ago as a technology developed by AT&T. The intended use of the scheme was to increase the voice channel capacity
Application Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D
Application Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout
2.996/6.971 Biomedical Devices Design Laboratory Lecture 2: Fundamentals and PCB Layout Instructor: Hong Ma Sept. 12, 2007 Fundamental Elements Resistor (R) Capacitor (C) Inductor (L) Voltage Source Current
STF203-15 THRU STF203-33
Description The STF03 is a combination EMI filter and line termination device with integrated diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive
SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
7. Technical Notes Table of Contents
7. Technical otes Table of Contents Introduction....................................................262 Understanding RFI Power Line Filters.............................263 Understanding Hipot Testing.....................................266
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
C ole s quality Open Frame Instrument Rotary Switch provides low
OPEN FRAME series C ole s quality Open Frame Instrument Rotary Switch provides low contact resistance (.005W), very high contact reliability, smooth action with positive positioning, precision design,