Cree XLamp XHP50 LEDs

Transcription

1 Cree XLamp XHP50 LEDs Product family data sheet CLD-DS111 Rev 1F Product Description FEATURES Table of Contents Powered by Cree s groundbreaking SC5 Technology Platform, the XLamp XHP50 LED is a member of Cree s Extreme High Power (XHP) class of LEDs that redefines lumen density and reliability to radically reduce system costs by up to 40 percent. At its maximum current, the XHP50 LED delivers twice the light output of the industry s brightest single-die LED, the XLamp XM L2 LED, with similar lumens per watt and without increasing the package footprint. The XHP50 LED also achieves longer lifetime at higher operating temperatures than previous LED technology. The result is significantly lower thermal, mechanical and optical costs at the system level. Available in white, configurable to 6 V or 12 V by PCB layout Available in 5-step EasyWhite bins at 3000 K to 5000 K CCT, 3-step EasyWhite bins at 2700 K to 5000 K and 2-step EasyWhite bins at 2700 K to 4000 K CCT Available in ANSI white bins at 3000 K to 7000 K CCT Available in standard, 70-, 80-, and 90 minimum CRI options Binned at 85 C Maximum drive current: 3000 ma (6 V), 1500 ma (12 V) Low thermal resistance: 1.2 C/W Wide viewing angle: 120 Unlimited floor life at 30 ºC/85% RH Reflow solderable - JEDEC J STD 020C RoHS and REACh compliant UL recognized component (E349212) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, XLamp and EasyWhite are registered trademarks and the Cree logo and SC5 Technology are trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. Characteristics...2 Flux Characteristics, EasyWhite Order Codes and Bins...3 Flux Characteristics, ANSI White Order Codes and Bins...7 Relative Spectral Power Distribution Relative Flux vs. Junction Temperature Electrical Characteristics Relative Flux vs. Current Relative Chromaticity vs Current Relative Chromaticity vs Temperature Typical Spatial Distribution Thermal Design Performance Groups Luminous Flux Performance Groups Chromaticity Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Bin and Order-Code Formats Reflow Soldering Characteristics Notes Mechanical Dimensions Electrical Configuration Tape and Reel Packaging Cree, Inc Silicon Drive Durham, NC USA Tel:

2 Characteristics XHP50 LEDs are tested and binned in production in the 12 V configuration. See the Mechanical Dimensions section on page 30 for pad layout options. Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point C/W 1.2 Viewing angle (FWHM) degrees 120 Temperature coefficient of voltage (6 V)* mv/ C -4.5 Temperature coefficient of voltage (12 V) mv/ C -9 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 DC forward current (6 V)* ma 3000 DC forward current (12 V) ma 1500 Reverse voltage V -5 Forward voltage ( ma, 85 C)* V Forward voltage ( ma, 85 C) V LED junction temperature C 150 Note: * Data for the 6 V configuration is calculated and for reference only. 2

3 Flux Characteristics, EasyWhite Order Codes and Bins The following table provides order codes for XLamp XHP50 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 26). Binning condition: T J = 85 C; 12 V, I F = 700 ma Reference condition: T J = 85 C; 6 V, I F = 1400 ma CRI Minimum Luminous Flux 2-Step 3-Step 5-Step Nominal CCT Min Typ Group Flux 85 C Flux 25 C* Group Order Code Group Order Code Group Order Code J D0BJ450E 70 J E 0D0BJ250E H D0BH450E J D0HJ250G 80 H G 0D0HH450G 5000 K H D0HH250G H D0UH250G G D0UG450G 90 G G 0D0UG250G F D0UF450G F D0UF250G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 3

4 Flux Characteristics, EasyWhite Order Codes and Bins - Continued CRI Minimum Luminous Flux 2-Step 3-Step 5-Step Nominal CCT Min Typ Group Flux 85 C Flux 25 C* Group Order Code Group Order Code Group Order Code J D0BJ445E 70 J E 0D0BJ245E H D0BH445E H D0HH445G 4500 K 80 H G G 0D0HH245G 0D0HG445G G D0UG445G 90 G F G 0D0UG245G 0D0UF445G F D0UF245G J D0BJ440E 70 J E 0D0BJ240E H D0BH440E H D0HH440H 0D0HH440G 4000 K 80 H G H 0D0HH240H 0D0HG440H 40G 0D0HH240G 0D0HG440G G D0UG440H 0D0UG440G 90 G F H 0D0UG240H 0D0UF440H 40G 0D0UG240G 0D0UF440G F D0UF240H 0D0UF240G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 4

5 Flux Characteristics, EasyWhite Order Codes and Bins - Continued CRI Minimum Luminous Flux 2-Step 3-Step 5-Step Nominal CCT Min Typ Group Flux 85 C Flux 25 C* Group Order Code Group Order Code Group Order Code 70 H H E 0D0BH435E 0D0BH235E H D0HH435H 0D0HH435G 80 H H 0D0HH235H 35G 0D0HH235G 3500 K G D0HG435H 0D0HG435G G D0UG435H 0D0UG435G 90 G F H 0D0UG235H 0D0UF435H 35G 0D0UG235G 0D0UF435G F D0UF235H 0D0UF235G H D0BH430E 70 H E 0D0BH230E G D0BG430E H D0HH430H 0D0HH430G 3000 K 80 H G H 0D0HH230H 0D0HG430H 30G 0D0HH230G 0D0HG430G G D0HG230H 0D0HG230G G D0UG230H 0D0UG230G 90 F F H 0D0UF430H 0D0UF230H 30G 0D0UF430G 0D0UF230G E D0UE430H 0D0UE430G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 5

6 Flux Characteristics, EasyWhite Order Codes and Bins - Continued CRI Minimum Luminous Flux 2-Step 3-Step 5-Step Nominal CCT Min Typ Group Flux 85 C Flux 25 C* Group Order Code Group Order Code Group Order Code H D0HH227H 0D0HH227G 80 G H 0D0HG427H 27G 0D0HG427G 2700 K G F D0HG227H 0D0UF427H 0D0HG227G 0D0UF427G 90 F H 0D0UF227H 27G 0D0UF227G E D0UE427H 0D0UE427G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 6

7 Flux Characteristics, ANSI White Order Codes and Bins The following table provides order codes for XLamp XHP50 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 26). Binning condition: T J = 85 C; 12 V, I F = 700 ma Reference condition: T J = 85 C; 6 V, I F = 1400 ma Nominal CCT 7000 K 6500 K Chromaticity Regions 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U CRI Min Typ Group Minimum Luminous Flux Flux 85 C Flux 25 C* Order Code J D00J40DT J D00J20DT J D0BJ40DT J D0BJ20DT J D0HJ20DT H D0HH40DT H D0HH20DT H D0UH20DT G D0UG40DT G D0UG20DT F D0UF40DT J D00J40CB J D00J20CB J D0BJ40CB J D0BJ20CB J D0HJ20CB H D0HH40CB H D0HH20CB H D0UH20CB G D0UG40CB G D0UG20CB F D0UF40CB Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 7

8 Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT Chromaticity Regions 6500 K 1A, 1B, 1C, 1D 6000 K 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 5700 K 2A, 2B, 2C, 2D CRI Min Typ Group Minimum Luminous Flux Flux 85 C Flux 25 C* Order Code J D00J40E1 J D00J20E1 J D0BJ40E1 J D0BJ20E1 J D0HJ20E1 H D0HH40E1 H D0HH20E1 H D0UH20E1 G D0UG40E1 G D0UG20E1 F D0UF40E1 J D00J40DV J D00J20DV J D0BJ40DV J D0BJ20DV J D0HJ20DV H D0HH40DV H D0HH20DV H D0UH20DV G D0UG40DV G D0UG20DV F D0UF40DV J D00J40E2 J D00J20E2 J D0BJ40E2 J D0BJ20E2 J D0HJ20E2 H D0HH40E2 H D0HH20E2 H D0UH20E2 G D0UG40E2 G D0UG20E2 F D0UF40E2 8

9 Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT Chromaticity Regions 5000 K 3A, 3B, 3C, 3D 4500 K 4A, 4B, 4C, 4D CRI Min Typ Group Minimum Luminous Flux Flux 85 C Flux 25 C* Order Code J D00J40E3 J HP50A D00J20E3 H D00H40E3 J D0BJ40E3 J D0BJ20E3 H D0BH40E3 J D0HJ20E3 H D0HH40E3 H D0HH20E3 H D0UH20E3 G D0UG40E3 G D0UG20E3 F D0UF40E3 F D0UF20E3 J D00J40E4 J D00J20E4 H D00H40E4 J D0BJ40E4 J D0BJ20E4 H D0BH40E4 H D0HH40E4 H D0HH20E4 G D0HG40E4 G D0UG40E4 G D0UG20E4 F D0UF40E4 F D0UF20E4 Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 9

10 Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT Chromaticity Regions 4000 K 5A, 5B, 5C, 5D CRI Min Typ Group K 6A, 6B, 6C, 6D K 7A, 7B, 7C, 7D 70 Minimum Luminous Flux Flux 85 C Flux 25 C* Order Code J D00J20E5 H D00H40E5 J D0BJ20E5 H D0BH40E5 H D0HH40E5 H D0HH20E5 G D0HG40E5 G D0UG40E5 G D0UG20E5 F D0UF40E5 F D0UF20E5 J D0BJ20E6 H D0BH40E6 H D0BH20E6 J D0BJ20E7 H D0BH40E7 H D0BH20E7 G D0BG40E7 Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 28). Cree XLamp XHP50 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux 25 C are calculated and for reference only. 10

11 Relative Spectral Power XLamp XHP50 LED Relative Spectral Power Distribution 100% 80% Relative Radiant Power 60% 40% 20% 6500 K, 68 CRI 3000 K, 80 CRI 0% Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature Reference condition: 6 V, I F = 1400 ma; 12 V, I F = 700 ma 120% 100% Relative Luminous Flux 80% 60% 40% 20% 0% Junction Temperature (ºC) 11

12 Electrical Characteristics (T J = 85 C) Forward Current (ma) V Electrical Characteristics (Tj = 85 C) Forward Voltage (V) Forward Current (ma) V Forward Voltage (V) 12

13 Relative Flux vs. Current (T J = 85 C) 200% 180% 160% Relative Luminous Flux 140% 120% 100% 80% 60% 40% 20% 6 V 0% Forward Current (ma) Relative Intensity vs. Current (Tj = 85 C) 200% 180% Relative Luminous Flux 160% 140% 120% 100% 80% 60% 40% 20% 12 V 0% Forward Current (ma) 13

14 Relative Chromaticity vs Current (Warm White) V ΔCCx ΔCCy Current (ma) Relative Chromaticity Vs. Current, WW V ΔCCx ΔCCy Current (ma) 14

15 Relative Chromaticity vs Temperature (Warm White) Reference Relative condition: Chromaticity 6 V, I Vs. F = 1400 Temperature ma; 12 V, WW I F = 700 ma ΔCCx ΔCCy Tj ( C) Typical Spatial Radiation Pattern Typical Spatial Distribution Reference condition: T J = 85 C; 6 V, I F = 1400 ma; 12 V, I F = 700 ma 100% Relative Luminous Intensity 80% 60% 40% 20% 0% Angle (º) 15

16 Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics V Maximum Current (ma) Rj-a = 2 C/W Rj-a = 4 C/W Rj-a = 6 C/W Rj-a = 8 C/W Ambient Temperature (ºC) Thermal Design 1600 Maximum Current (ma) Rj-a = 2 C/W Rj-a = 4 C/W Rj-a = 6 C/W 12 V 200 Rj-a = 8 C/W Ambient Temperature (ºC) 16

17 Performance Groups Luminous Flux (T J = 85 C) XLamp XHP50 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Minimum Luminous Flux Maximum Luminous Flux E F F G G H H J J Performance Groups Chromaticity XLamp XHP50 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures 2-Step Bin Code CCT x y H 35H 30H 27H 4000 K 3500 K 3000 K 2700 K

18 Performance Groups Chromaticity (continued) EasyWhite Color Temperatures 3-Step Ellipse Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle ( ) x y a b 50G 5000 K G 4500 K G 4000 K G 3500 K G 3000 K G 2700 K EasyWhite Color Temperatures 5-Step Ellipse Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle ( ) x y a b 50E 5000 K E 4500 K E 4000 K E 3500 K E 3000 K ANSI White Bins ANSI White Bins ANSI White Bins CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y 7000 K 0A0 0B0 0C0 0D R0 1A S0 1B K 7000 K T0 1C U0 1D

19 Performance Groups Chromaticity (continued) ANSI White Bins ANSI White Bins ANSI White Bins CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y 7000 K 1R0 1S0 1T0 1U A0 2R B0 2S K 6000 K C0 2T D0 2U ANSI White Bins ANSI White Bins CCT Bin Code x y CCT Bin Code x y A0 4A B0 4B K 4500 K C0 4C D0 4D

20 Performance Groups Chromaticity (continued) ANSI White Bins ANSI White Bins ANSI White Bins CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y 4000 K 5A0 5B0 5C0 5D A0 7A B0 7B K 3000 K C0 7C D0 7D

21 Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White K K CCy K 0S 0B 6500 K 1S 0T 1B 0C 1A 0D 1R 0A 0U 0R 1T 1C 1D 1U 2S 2B 2A 2R 2T 2C 2D 2U ANSI C78.377A CCx 21

22 Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve - Continued ANSI Neutral White and ANSI Warm White K K CCy K 5000 K 4500 K 4C 5B 4000 K 5D 5C 6A 6B 3500 K 6C 7A 6D 7B 7D 7C B 3A 3C 3D 4A 4B 4D 5A ANSI C78.377A CCx 22

23 Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve - Continued ANSI C Quadrangle EasyWhite 5-Step EasyWhite 3-Step EasyWhite 2-Step 4500 K 4000 K 3500 K 3000 K 2700 K K K 5700 K 8000 K CCy CCx 23

24 Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions K K K K CCy K CB 1S 6500 K 1T 1C 2S 2B 2T 2C 2D CCy K DT 1S 6500 K 1T 1C 2S 2B 2T 2C 2D T 0S 0C 0B 0D 0A 0U 0R 1B 1A 1R 1D 1U 2A 2R 2U ANSI C78.377A T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1D 1U 2A 2R 2U ANSI C78.377A CCx CCx K K CCy K 6500 K 1S 1T 1C DV 5700 K 2S 2B 2T 2C 2D CCy K 6500 K E1 1S 1T 1C 5700 K 2S 2B 2T 2C 2D 3S 3B 3A 0T 1B 1D 2A 2U 0T 1B 1D 2A 2U 3R S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx CCx K K 5700 K E2 2S 2T 3S 3B CCy 8000 K 1S 1T 1C 2B 2C 2D 3A 0T 1B 1D 2A 2U 3R S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx 24

25 Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions K CCy E K E4 4B 3C 3B 4A 3D 3A 4500 K E K 5C 5B 4C 5D 5A 4D 6A E K 6C 6B 7A 6D 7B E7 7D 7C 3000 K ANSI C78.377A CCx 25

26 Bin and Order-Code Formats Bin codes and order codes for XHP50 LEDs are configured in the following manner: Order Code Bin Code SSSSSS-BD-GGGG-HJKLMMNNN Series XHP50A = XHP50 Internal code Minimum luminous flux group Chromaticity group CRI specification 0 = No Minimum CRI B = 70 CRI Minimum H = 80 CRI Minimum U = 90 CRI Minimum Vf Class D = 6-V/12-V configurable Configuration B = Internal code D = Reel size SSSSSS-E-NNN-MMM-JK-L-PP Series XHP50A = XHP50 Chromaticity group Vf Class D = 6-V/12-V configurable CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Internal code Voltage performance group Luminous flux group Internal code 26

27 Reflow Soldering Characteristics In testing, Cree has found XLamp XHP50 LEDs to be compatible with JEDEC J STD 020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. T P Ramp-up t P Critical Zone T L to T P Temperature T L Ts max Ts min ts Preheat t S Ramp-down 25 t 25 C to Peak Time Profile Feature Average Ramp-Up Rate (Ts max to T p ) Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Ts min ) 120 C Preheat: Temperature Max (Ts max ) 170 C Preheat: Time (ts min to ts max ) seconds Time Maintained Above: Temperature (T L ) 217 C Time Maintained Above: Time (t L ) seconds Peak/Classification Temperature (Tp) C Time Within 5 C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 C to Peak Temperature seconds 1-6 C/second 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. 27

28 Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM and TM methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM 80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP50 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. 28

29 notes - continued UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. 29

30 Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. All dimensions are ±.13 mm unless otherwise indicated R2.85 R PRIMARY PRIMARY Top View Side View R Cathode Side REF. REF. Cathode Side Anode Side Anode Side REF. REF Bottom PRIMARY ALTERNATIVE View PRIMARY Alternate ALTERNATIVE Bottom View As shown in these bottom views, thermal pad is electrically isloated RECOMMENDED RECOMMENDED PCB SOLDER PAD PCB SOLDER PAD 6V 6V RECOMMENDED RECOMMENDED PCB SOLDER PAD PCB SOLDER PAD 12V 12V SC Technology 2.14are trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC

31 PRIMARY XLamp XHP50 LED Mechanical Dimensions - Continued REF REF PRIMARY ALTERNATIVE Recommended PCB Solder Pad 6 V Configuration Recommended PCB Solder Pad 12 V Configuration (thermal RECOMMENDED pad is electrically PCB PCB SOLDER PAD isolated) PAD (thermal pad RECOMMENDED is connected PCB to PCB SOLDER anode PAD and PAD cathode and is not 6V 6V electrically 12V 12Visolated) RE OMMENDED PCB SOLDER PAD 12V Recommended RECOMMENDED STENCIL Stencil PATTERN Pattern 6 (HATCHED V & 12 V AREA Configurations IS OPENING) 6v/12v (shaded area is open) 31

32 POSITIVE A NEGATIVE B XLamp XHP50 LED Electrical Configuration 6 V 12 V SOLDER PAD LINK NEGATIVE A POSITIVE A POSITIVE A 6 NEGATIVE B TICE HIS PLOT AND THE INFORMATION E THE PROPRIETARY AND ATION OF CREE, INC. THIS PLOT EPRODUCED OR DISCLOSED TO ANY N WITHOUT THE WRITTEN CONSENT D NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON 5 WITHOUT THE WRITTEN CONSENT OF CREE INC. Tape and Reel 6 POSITIVE B 4 5 NEGATIVE B REV 6-V Configuration 12-V Configuration V B 3 2 REVISONS DESCRIPTION REVERSED POLARITY IN VIEW REV B All Cree carrier tapes conform to EIA-481D, Automated Component 4 Handling Systems Standard. 1.5 NEGATIVE A All dimensions are ±.13 mm unless otherwise indicated. END NEGATIVE 8 B CATHODE SIDE User Feed Direction User Feed Direction POSITIVE A POSITIVE B START END C 4 8 CATHODE SIDE START 12 Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) Trailer 160mm (min) of empty pockets sealed with ANODE tape SIDE (15 pockets min.) Loaded Pockets (500 Lamps) ANODE SIDE Loaded Pockets (500 Lamps) Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 5.3 User Feed Direction B User Feed Direction 13mm 13mm A DRAWN BY DATE Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, XLamp UNLESS OTHERWISE and EasyWhite SPECIFIED THIRD ANGLE PROJECTION 7.0" DIMENSIONS ARE are IN registered trademarks D. CRONIN and 12/9/14 FOR SHEET METAL PARTS ONLY the Cree logo and SC5 Technology are trademarks of Cree, Inc. UL.X ± 1.5 CHECK DATE and the UR logo are registered trademarks of UL LLC. MILLIMETERS AND AFTER FINISH..XX ±.75 TOLERANCE UNLESS SPECIFIED: XXX ±.25 DATE X ±.5.XX ±.25 APPROVED.XXX ±.125 X ±.5 -- THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY 3 MATERIAL.X ± " -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED:.XX ±.25.XXX ±.125 X ±.5 32 XHP50 LOAD TITLE SURFACE FINISH: 1.6 D C A M F

33 Packaging Unpackaged Reel Vacuum-Sealed Moisture Vacuum-Sealed Barrier Bag Moisture Barrier Bag Packaged Reel CREE Label Bin with CodeCree Bin & Code, Barcode Qty, Label Lot # Label with Cree Bin Code, Quantity, Reel ID Label with with Customer Cree Bin Code, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) 33