Cree XLamp XT-E High-Voltage White LEDs
|
|
- Clifford Houston
- 8 years ago
- Views:
Transcription
1 Cree XLamp XT-E High-Voltage White LEDs Product family data sheet CLD-DS43 REV 11A Product Description The Cree XLamp XT-E High Voltage White (HVW) LED provides the lighting class performance and reliability of Cree XLamp LEDs in a small form, high voltage configuration. The XT-E HVW LED is an order of magnitude smaller than other high voltage LED arrays, allowing easy implementation of space constrained lighting applications with smaller, more efficient high voltage drivers. Among these applications are small lamps such as B10, GU10 and E17. FEATURES Binned at 85 C Available in 12 V, 24 V and 48 V configurations Cree-standard mechanical footprint of 3.45 X 3.45 mm with electrically neutral thermal path Unlimited floor life at 30 ºC/85% RH Reflow solderable Available in standard CRI and 80 minimum CRI configurations RoHS and REACh compliant UL recognized component (E349212) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. UL and Cree, Inc Silicon Drive Durham, NC USA Tel:
2 Table of Contents Characteristics... 3 Flux Characteristics - 12 V... 4 Flux Characteristics - 24 V... 4 Flux Characteristics - 48 V... 5 Relative Spectral Power Distribution Relative Flux vs. Junction Temperature Electrical Characteristics Relative Flux vs. Current Typical Spatial Distribution Thermal Design Performance Groups Luminous Flux Performance Groups Forward Voltage Performance Groups Chromaticity Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Cree s 2450 K & 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Chromaticity Kits Bin and Order Code Formats Reflow Soldering Characteristics Mechanical Dimensions Tape and Reel Packaging
3 Characteristics Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point (12 V, 24 V) C/W 5 Thermal resistance, junction to solder point (48 V) C/W 6.5 Viewing angle (FWHM, 12 V) degrees 130 Viewing angle (FWHM, 24 V, 48 V) degrees 115 Temperature coefficient of voltage (12 V) mv/ C -8.5 Temperature coefficient of voltage (24 V) mv/ C -17 Temperature coefficient of voltage (48 V) mv/ C -37 ESD withstand voltage (HBM per Mil-Std-883D) (12 V) V 8000 ESD Classification (HBM per Mil-Std-883D) (24 V, 48 V) Class 2 DC forward current (12 V) ma 375 DC forward current (24 V) ma 125 DC forward current (48 V) ma 66 Reverse current ma -0.1 Forward voltage (12 88 ma, 85 C) V Forward voltage (24 44 ma, 85 C) V Forward voltage (48 22 ma, 85 C) V LED junction temperature C 150 3
4 Flux Characteristics - 12 V (88 ma, T J = 85 C) The following table provides order codes for 12-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 30). Chromaticity Minimum Luminous Flux 88 ma Order Codes Kit CCT Code E7 F8 E K 2850 K 2700 K Flux 85 C Flux 25 C* 82 CRI Typical 80 CRI Minimum Q XTEHVW-D LDE7 XTEHVW-D HDE7 Q XTEHVW-D LCE7 XTEHVW-D HCE7 Q XTEHVW-D LBE7 XTEHVW-D HBE7 Q XTEHVW-D LCF8 XTEHVW-D HCF8 Q XTEHVW-D LBF8 XTEHVW-D HBF8 Q XTEHVW-D LAF8 XTEHVW-D HAF8 Q XTEHVW-D LCE8 XTEHVW-D HCE8 Q XTEHVW-D LBE8 XTEHVW-D HBE8 Q XTEHVW-D LAE8 XTEHVW-D HAE8 Flux Characteristics - 24 V (44 ma, T J = 85 C) The following tables provide order codes for 24-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 30). Chromaticity Minimum Luminous Flux 44 ma Order Codes Kit CCT Code Flux 85 C Flux 25 C* 75 CRI Typical 82 CRI Typical 80 CRI Minimum E3 F4 E7 F K 4750 K 3000 K 2850 K R XTEHVW-H LEE3 XTEHVW-H HEE3 Q XTEHVW-H LDE3 XTEHVW-H HDE3 Q XTEHVW-H LCE3 XTEHVW-H HCE3 R XTEHVW-H LEF4 XTEHVW-H HEF4 Q XTEHVW-H LDF4 XTEHVW-H HDF4 Q XTEHVW-H LCF4 XTEHVW-H HCF4 Q XTEHVW-H LCE7 XTEHVW-H HCE7 Q XTEHVW-H LBE7 XTEHVW-H HBE7 Q XTEHVW-H LAE7 XTEHVW-H HAE7 Q XTEHVW-H LBF8 XTEHVW-H HBF8 Q XTEHVW-H LAF8 XTEHVW-H HAF8 P XTEHVW-H L9F8 XTEHVW-H H9F8 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 4
5 Flux Characteristics - 24 V (44 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 44 ma Order Codes Kit CCT Code E K Flux 85 C Flux 25 C* 75 CRI Typical 82 CRI Typical 80 CRI Minimum Q XTEHVW-H LBE8 XTEHVW-H HBE8 Q XTEHVW-H LAE8 XTEHVW-H HAE8 P XTEHVW-H L9E8 XTEHVW-H H9E8 Flux Characteristics - 48 V (22 ma, T J = 85 C) The following tables provide order codes for 48-V XLamp XT-E HVW LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 30). Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code K K Flux 85 C Flux 25 C* R R R R Q Q R R R R Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LH LG LF LE LD LC LH LG LF LE LD LC53 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 5
6 Flux Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code K E1 E K 5700 K Flux 85 C Flux 25 C* R R R R Q Q R R R R Q Q R R R R Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LH LG LF LE LD LC LHE LGE LFE LEE LDE LCE LHE LGE LFE LEE LDE LCE2 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 6
7 Flux Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code E3 F4 E K 4750 K 4500 K Flux 85 C Flux 25 C* R R Q Q Q R R R Q Q Q R R R Q Q Q No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LFE LEE LDE LCE LBE LGF LFF LEF LDF LCF LBF LGE LFE LEE LDE LCE LBE4 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 7
8 Flux Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code F5 E5 F K 4000 K 3750 K Flux 85 C Flux 25 C* R Q Q Q Q P R Q Q Q Q P R Q Q Q Q P P No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LEF LDF LCF LBF LAF L9F LEE LDE LCE LBE LAE L9E LEF LDF LCF LBF LAF L9F L8F HDF HCF HBF HAF H9F HDE HCE HBE HAE H9E HDF HCF HBF HAF H9F H8F6 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 8
9 Flux Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code E6 F7 E K 3250 K 3000 K Flux 85 C Flux 25 C* R Q Q Q Q P P Q Q Q Q P P Q Q Q Q P P No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LEE LDE LCE LBE LAE L9E L8E LDF LCF LBF LAF L9F L8F LDE LCE LBE LAE L9E L8E HDE HCE HBE HAE H9E H8E HDF HCF HBF HAF H9F H8F HDE HCE HBE HAE H9E H8E7 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 9
10 Flux Characteristics - 48 V (22 ma, T J = 85 C) - Continued Chromaticity Minimum Luminous Flux 22 ma Order Codes Kit CCT Code F8 E8 F9 FA EA 2850 K 2700 K 2700 K 2450 K 2200 K Flux 85 C Flux 25 C* Q Q Q P P P Q Q Q P P P Q Q P P P P N P N N No Minimum CRI 75 CRI Typical 82 CRI Typical 80 CRI Minimum 00000LCF LBF LAF L9F L8F L7F LCE LBE LAE L9E L8E L7E LBF LAF L9F HCF HBF HAF H9F H8F H7F HCE HBE HAE H9E H8E H7E HAF H9F H8F H8FA 00000H7FA 00000H6FA 00000H7EA 00000H6EA 00000H5EA Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 32). Cree XLamp XT-E HVW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values at 25 C are calculated and for reference only. 10
11 Relative Spectral Power Relative Spectral Power Distribution (12 V, 88 ma; 24 V, 44 ma; T J = 85 C) 100 Relative Radiant Power (%) K K CCT Relative Spectral Power Wavelength (nm) Relative Spectral Power Distribution (48 V, 22 ma; T J = 85 C) 100 Relative Radiant Power (%) K K CCT 2600 K K CCT Wavelength (nm) 11
12 Relative Flux Output vs. Junction Temperature XLamp XT-E HVW LED Relative Flux vs. Junction Temperature (12 V, 88 ma; 24 V, 44 ma; 48 V, 22 ma) 120% 100% Relative Luminous Flux 80% 60% 40% 20% 0% Junction Temperature (ºC) Electrical Characteristics (Tj = 85ºC) (T J = 85 C) Forward Current (ma) V XT-E HVW Forward Voltage (V) 12
13 Electrical Characteristics (Tj = 85ºC) Characteristics (T J = 85 C) - Continued Forward Current (ma) V XT-E HVW Forward Voltage (V) Electrical Characteristics (Tj = 85ºC) Forward Current (ma) V XT-E HVW Forward Voltage (V) 13
14 Relative Intensity vs. Current (Tj = 85ºC) XLamp XT-E HVW LED Relative Flux vs. Current (T J = 85 C) 350% 300% Relative Luminous Flux 250% 200% 150% 100% 50% 12-V XT-E HVW 0% Relative Intensity vs. Current (Tj = 85ºC) Forward Current (ma) 250% 200% Relative Luminous Flux 150% 100% 50% 24 V XT-E HVW 0% Forward Current (ma) 14
15 Relative Intensity vs. Current (Tj = 85ºC) XLamp XT-E HVW LED Relative Flux vs. Current (T J = 85 C) - Continued 250% 200% Relative Luminous Flux 150% 100% 50% 48-V XT-E HVW 0% Forward Current (ma) Typical Spatial Radiation Pattern Typical Spatial Distribution (12-V XT-E HVW) 100 Relative Luminous Intensity (%) Angle (º) 15
16 Typical Spatial Radiation Pattern XLamp XT-E HVW LED Typical Spatial Distribution (24-V & 48-V XT-E HVW) 100 Relative Luminous Intensity (%) Angle (º) Thermal Design Thermal Design Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W 12-V XT-E HVW 50 Rj-a = 20 C/W 0 Rj-a = 25 C/W Ambient Temperature (ºC) 16
17 Thermal Design Thermal Design - Continued Maximum Current (ma) Thermal Design Rj-a = 10 C/W 40 Rj-a = 15 C/W 20 Rj-a = 20 C/W Rj-a = 25 C/W Ambient Temperature (ºC) 24-V XT-E HVW Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W 48-V XT-E HVW 0 Rj-a = 25 C/W Ambient Temperature (ºC) 17
18 Performance Groups Luminous Flux (T J = 85 C) XLamp XT-E High Voltage White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Min. Luminous Flux Max. Luminous Flux N N P P P Q Q Q Q R R R R S Performance Groups Forward Voltage (T J = 85 C) 48 V XLamp XT-E High Voltage White LEDs are tested for forward voltage at 22 ma and placed into one the following voltage bins. Group Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) 0 No Vf Bin
19 Performance Groups Chromaticity Region x y Region x y Region x y Region x y A B 0C 0D R S 0T 0U A B 1C 1D R S 1T 1U A B 2C 2D R S 2T 2U A B 3C 3D R S 3T 3U A B 4C 4D R S 4T 4U
20 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y A B 5C 5D A A2 5A3 5A B B2 5B3 5B C C2 5C3 5C D D2 5D3 5D R S 5T 5U A B 6C 6D A A2 6A3 6A B B2 6B3 6B C C2 6C3 6C
21 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y D D2 6D3 6D R S 6T 6U A B 7C 7D A A2 7A3 7A B B2 7B3 7B C C2 7C3 7C D D2 7D3 7D A B 8C 8D A A2 8A3 8A B B2 8B3 8B
22 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y C C2 8C3 8C D D2 8D3 8D A A2 9A3 9A B B2 9B3 9B C C2 9C3 9C D D2 9D3 9D AA AA2 AA3 AA AB AB2 AB3 AB AC AC2 AC3 AC AD AD2 AD3 AD
23 Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve ANSI Cool White 5000 K 5700 K 6500 K 2S 2T 3S 3B CCy 8000 K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R S 0B 0A 0C 0D 0R 0U 1A 1R 1U 2R ANSI C78.377A CCx ANSI Neutral White and ANSI Warm White - 48-V XT-E HVW K 2700 K CCy 3B 5000 K 3C 4A 4B 4D 4500 K 4C 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C3 8B1 8A3 8D1 8B2 8B4 8D2 8D4 8B3 8C1 8D3 ANSI C78.377A 8C2 8C4 8C3 3D 3A CCx 23
24 Cree s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve - Continued ANSI Neutral White and ANSI Warm White - 12-V & 24-V XT-E HVW K 2900 K 2700 K 2600 K CCy 5300 K 3B 3A 5000 K 4750 K 3D 3C 4A 4B 4300 K 4500 K 5B 4C 5A 4D 4000 K 5D 5C 6A 3700 K 6B 3500 K 6D 6C 7A 3200 K 7B 7D 7C 8A 8B 8D 8C ANSI C78.377A CCx 24
25 Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 5000 K 5000 K 6500 K K 2S 2T 3S 3B 6500 K K 2S 2T 3S 3B CCy K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2B 2A 2R 2C 2D 2U 3A 3R ANSI C78.377A CCy K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2B 2A 2R 2C 2D 2U 3A 3R ANSI C78.377A CCx CCx 5000 K 5000 K 5700 K 5700 K CCy K 6500 K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 50 2S 1T 2B 1C 2A 1D 2R 1U 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCy K 6500 K E1 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2S 2B 2A 2R 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCx CCx 5000 K 6500 K 5700 K E2 2S 2T 3S 3B CCy 8000 K 1S 1T 1C 2B 2C 2D 3A 0T 1B 1D 2A 2U 3R S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx 25
26 Cree s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions 3500 K 3500 K CCy 3S 3B 3A 3R 5000 K 3U 3D 3C 3T C1 4R 4A 4B 4S 4U 4D 4000 K 6S 6C K 5T 6C2 5S 6B3 5C3 6B2 6C1 6C4 4T 5C2 6B4 5B3 5C4 6B1 6D2 6D3 5B2 5C1 6A3 5B4 5D3 6A2 6D1 6D4 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 5D1 6U 5A4 5A1 6R 5U 5R ANSI C78.377A 6T CCy 3S 3B 3A 3R 5000 K 3U 3D 3C 3T 4R D1 4A 4B 4S 4U 4D 4500 K 4C 4T 5A1 5A2 5R 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 ANSI C78.377A 4000 K 5C2 5D4 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 6C2 6D3 6C4 6C3 6T CCx CCx 3500 K 3500 K CCy 3S 3B 3A 3R 5000 K 3U 3D 3C 3T 4R 4A C2 4B 4S 4U 4D 4000 K 6S 6C K 5T 6C2 5S 6B3 5C3 6B2 6C1 6C4 4T 5C2 6B4 5B3 5C4 6B1 6D2 6D3 5B2 5C1 6A3 5B4 5D3 6A2 6D1 6D4 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 5D1 6U 5A4 5A1 6R 5U 5R ANSI C78.377A 6T CCy 3S 3B 3A 3R 5000 K 3U 3D 3C 3T 4R 4A D2 4B 4S 4U 4D 4500 K 4C 4T 5A1 5A2 5R 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 ANSI C78.377A 4000 K 5C2 5D4 5D3 5C4 6A1 6R 5T 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6U 6D1 6S 6B3 6D2 6C1 6D4 6C2 6D3 6C4 6C3 6T CCx CCx CCy 3S 3B 3A 3R 5000 K 3U 3D 3C 3T 4R 4A 4B 4S 4U 4D 5R C K 4000 K 6S 4500 K 5T 6C3 6C2 6B3 5S 6C4 5C3 6B2 6C1 5C2 6B4 4T 6D3 5B3 5C4 6B1 6D2 5B2 5C1 6A3 5B4 5D3 6A2 6D4 6D1 4C 5B1 5D2 6A4 5A3 5D4 6A1 5A2 5D1 6U 5A4 5A1 6R 5U ANSI C78.377A 6T CCx 26
27 Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions K CCy 5000 K E3 3C 3B E4 4B 4D 4500 K 4C 5A1 5A2 5B1 5B2 5A4 E5 5A3 5B4 5B3 5D1 5D2 5C K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 E6 6B4 6D1 6B3 6D2 6C1 6D K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 E7 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C K 8B1 8A3 8D1 8B2 8B4 8D2 8D4 E8 8B3 8C1 8D3 8C2 8C4 ANSI C78.377A 8C3 4A 3D 3A CCx K CCy 3B 5000 K F4 4B 3C 4A 4D 4500 K 4C F5 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 F6 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 F7 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C K 8B1 8A3 8D1 F8 8B2 8B4 8D2 8D4 8B3 8C1 8D3 8C2 8C4 ANSI C78.377A 8C3 3D 3A CCx 27
28 Cree s 2450 K & 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions K F K 8C2 8C3 9B2 9B K 9B1 9B4 8C4 8C1 CCy 4000 K 9A3 8D2 8D3 9A2 9A1 9A4 8D4 8D CCx CCy K 2700 K 9B1 9A2 9A3 FA 9B2 9B3 9C2 9C3 9B4 9C1 9C4 9D2 9D K 2200 K CCy K 8B3 8B2 7C3 7C2 8C1 8B4 8B1 7C4 8D3 8D2 8A3 8A2 7D3 8D4 8D1 8A4 8A K 8C3 8C2 8C4 AA1 EA 2450 K 2200 K AB2 AB3 AC2 AC3 AB1 AB4 AC1 AC4 AA2 AA3 AD2 AD3 AA4 AD1 AD4 9A1 9A4 9D1 9D CCx CCx 28
29 Cree s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits for 12-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins Warm White 3000 K E7 7A, 7B, 7C, 7D 2850 K F8 7C, 7D, 8A, 8B 2700 K E8 8A, 8B, 8C, 8D The following table provides the chromaticity bins associated with chromaticity kits for 24-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins Neutral White Warm White 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 3000 K E7 7A, 7B, 7C, 7D 2850 K F8 7C, 7D, 8A, 8B 2700 K E8 8A, 8B, 8C, 8D The following table provides the chromaticity bins associated with chromaticity kits for 48-V XT-E HVW LEDs. Color CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S Cool White Neutral White Warm White 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4500 K C2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D K F9 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D, 9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B K FA 9A1, 9A2, 9A3, 9A4, 9B1, 9B2, 9B3, 9B4, 9C1, 9C2, 9C3, 9C4, 9D1, 9D2, 9D3, 9D K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 29
Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet
Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,
More informationCree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
More informationProduct family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
More informationAvailable in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
More informationCLD-DS45 Rev 2A. Product family data sheet
Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
More informationCree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
More informationCree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
More informationCree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4
PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED
More informationProduct family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
More informationCree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7
PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability
More informationCree XLamp XP-G2 LEDs
Product family data sheet L-S51 Rev 11 ree XLamp XP-G2 LEs Product escription The XLamp XP-G2 LE builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20% while
More informationCree XLamp MT-G EasyWhite LEDs
ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity
More informationCree XLamp MK-R LEDs. CLD-DS60 Rev 8. Product family data sheet
Cree XLamp MK-R LEDs Product family data sheet CLD-DS60 Rev 8 Product Description Built on Cree s revolutionary SC³ Technology platform, the XLamp MK R LED brings new levels of price and performance to
More informationHigh flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
More informationFeatures. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
More informationCree XLamp MC-E LED TABLE OF CONTENTS PRODUCT DESCRIPTION FEATURES CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET
PRODUCT FAMILY DATA SHEET CLD-DS16 REV 6 Cree XLamp MC-E LED PRODUCT DESCRIPTION The XLamp MC-E LED is a lightingclass, multi-chip LED that provides high lumen output in a small footprint package. Compared
More informationLUXEON TX Extreme efficacy that will transform your next market leading luminaire
LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to
More informationN35L-U High Power LED
N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U
More informationEdixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
More informationMultiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
More informationLUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
More informationCree XLamp XP-E High-Efficiency White LEDs
Product family data sheet ree XLamp XP-E High-Efficiency White LEDs LD-DS34 Rev 0 www. cree.com/xlamp PRODUT DESRIPTION XLamp XP-E High-Efficiency White LEDs upgrade the XLamp XP-E to leading performance
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationCree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
More informationEdixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
More informationCree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN
PRODUCT FAMILY DATA SHEET Cree 5-mm Red and Amber Round LED CLD-CT1079.005 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They
More informationLUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
More informationCree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
More informationP2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
More informationDOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
More informationEVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
More informationLZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
More informationP2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
More informationT5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
More informationWL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
More information703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
More informationData Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
More informationCree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
More informationCree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationMP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
More informationCree 5mm Round LED C503B-WAN
PRODUCT FAMILY DATA SHEET CLD-CT876.002 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationDiscontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
More informationCree PLCC4 SMD LED CLA2A-WKW
PRODUCT FAMILY DATA SHEET CLD-CT931.002 Cree PLCC4 SMD LED PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed to work
More informationCHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
More informationCree XLamp XM-L HVW LEDs
ree XLamp XM-L HVW LEs Product family data sheet L-S rev 0 Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard
More informationCLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
More informationCree PLCC4 3 in 1 SMD LED CLV1L-FKB
Cree PLCC4 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1238.005 PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationContents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
More information3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
More informationCree 5-mm Round LED C503C-WAS/WAN
Cree 5-mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1098.008 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationDirect Attach DA700 LEDs CxxxDA700-Sxx000
Direct Attach DA7 LEDs CxxxDA7-Sxx Data Sheet Cree s Direct Attach DA7 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree s proprietary device
More informationCree 5mm Round LED C503D-WAN
PRODUCT FAMILY DATA SHEET CLD-CT935.006 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationProduct family data sheet
ree XLamp XM-L LEs Product family data sheet L-S Rev 8 Product escription FETURES Table of ontents WWW.REE.OM/XLMP The XLamp XM-L LE is the Maximum drive current: industry s highest performance, 000 m
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
More information5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
More informationGeneral Purpose White Portfolio
LUXEON Rebel General Purpose Portfolio High flux and color stability Technical Datasheet DS64 LUXEON Rebel General Purpose White Portfolio Introduction The LUXEON Rebel General Purpose White Portfolio
More informationCree PLCC4 3-in-1 SMD LED CLV1A-FKB
PRODUCT FAMILY DATA SHEET CLD-CT874.009 Cree PLCC4 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More information1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
More informationCree P4 LED CP42B-RKS CP42B-AKS
Cree P4 LED CP42B-RKS CP42B-AKS PRODUCT FAMILY DATA SHEET CLD-CT1133.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide
More informationMaximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125
ree XLamp XM-L LEs PROUT FMILY T SHEET L-S REV WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE is the industry s highest performance, singledie white lighting-class LE. XLamp XM-L is 0% more efficient
More informationBridgelux ES Array Series
Bridgelux ES Array Series Product Data Sheet Introduction The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general
More information2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
More informationHow To Understand And Understand The Design Of An Oxymoron Lamp
Technical Datasheet DS56 power light source LUXEON Rebel Introduction LUXEON Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and
More informationCree XLamp Long-Term Lumen Maintenance
Cree XLamp Long-Term Lumen Maintenance July 29 This application note outlines Cree s long-term testing methodology and provides Cree s guidance on mean L 7 lifetimes for XLamp XR-E LED lamps in a wide
More information3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationHLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationC1919 15W COB Series
High Performance LED Module SemiLEDs C1919 15W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light source
More informationCree XLamp XM-L HVW LEDs
Product family data sheet L-S rev ree XLamp XM-L HVW LEs Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard
More informationData Sheet. Nationstar LED
Data Sheet Nationstar LED 1 Table of Contents General Informations:... 3 Electrical and Flux Characteristics... 3 Color Wavelength Diagram:... 6 Mechanical Dimensions:... 7 Electrical Connection:... 7
More informationSurface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
Preliminary DATASHEET Photon Detection Surface Mount 5 nm Pulsed Semiconductor Lasers Near field profile Excelitas pulsed semiconductor laser produces very high peak optical pulses centered at a wavelength
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
More information50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
More informationC4246 120W COB Series
High Performance LED Module SemiLEDs C4246 120W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light
More informationProduct Brief. Mid-Power LED 3030 Series. Product Data Sheet. Achieving the best system cost in Mid/High Power. STW8C2SB (Cool, Neutral, Warm) RoHS
Achieving the best system cost in Mid/High Power Mid-Power LED 3030 Series STW8C2SB (Cool, Neutral, Warm) RoHS Product Brief Description This White Colored surface-mount LED comes in standard package dimension.
More informationSPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More informationHow To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
More informationFeatures. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -4V/-25, R DS(ON) = 4mΩ (typ.) @ V GS = -V R DS(ON) = 55mΩ (typ.) @ V GS = -5V Super High Dense Cell Design G D S Reliable and Rugged Lead Free
More informationB Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
More informationHL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
More informationSMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode
DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems
More informationSMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
More informationAgilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
More informationLUXEON CoB with CrispWhite Technology Retail lighting that makes an impact
LUXEON CoB with CrispWhite Technology Retail lighting that makes an impact Introduction LUXEON CoB with CrispWhite Technology delivers the warm saturated colors of high 90 CRI solutions while creating
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationCBT-90 TE Thermally Enhanced LED Chipset
CBT-90 TE Thermally Enhanced LED Chipset Features: Table of Contents Technology Overview...2 Test Specifications...2 Ordering Information...3 Monochrome Binning Structure...4 Large, monolithic chip with
More informationData Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationTechnical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
More informationNo. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL:886-3-565-8800. Lextar.com 50W-100W COB LED. Updated on 2012/010/11
Lextar.com 50W-100W COB LED Updated on 2012/010/11 Approval Sheet 50W COB LED Product Specification Product COB Part Number PB50H01 Customer Issue Date 2012/10 Feature LED COB Dice Technology : InGaN High
More information1 W High Power LED TPLG-MR7171R-H11-0L0M. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More informationAntenna Part Number: FR05-S1-R-0-105
Fractus EZConnect Zigbee, RFID, ISM868/9 Chip Antenna Antenna Part Number: FR5-S1-R--15 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822 and other domestic and
More informationPDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
More informationCBT-140 White LEDs. CBT-140 Product Datasheet. Features: Table of Contents. Applications
CBT-140 White LEDs Features: Table of Contents Technology Overview...2 Test Specifications...2 Binning Structure...3 Chromaticity Bins...4 Ordering Inforamtion...6 Bin Kit Order Codes...7 Shipping and
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More information