Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125

Transcription

1 ree XLamp XM-L LEs PROUT FMILY T SHEET L-S REV PROUT ESRIPTION The XLamp XM-L LE is the industry s highest performance, singledie white lighting-class LE. XLamp XM-L is 0% more efficient than XLamp XP-G at the same current, and can deliver 000 lumens with 00 lumens per Watt efficacy. The XLamp XM-L LE offers ree s industry-leading features: wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path. XLamp XM-L LEs can enable LE light into new applications that require tens of thousands of lumens, such as high bay and high-output area lighting. XM-L is also the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LE light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. FETURES Maximum drive current: 000 m Low thermal resistance:. /W Maximum junction temperature: 0 Viewing angle: vailable in warm, neutral and cool white NSI-compatible chromaticity opyright 00-0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. opyright 00 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. ree, the ree logo and XLamp are registered trademarks of ree, Inc. bins Unlimited floor life at 0º/8% RH Reflow solderable - JEE J-ST-00 Electrically neutral thermal path TLE OF ONTENTS Label Flux haracteristics... with ree in ode, Qty, haracteristics... Lot #... 0 Label Relative with Spectral ustomer Power Order ode,... 0 istribution... Qty, Relative Reel I, Flux PO# vs.... Junction 0 Temperature... Electrical haracteristics... Thermal esign... Relative Flux vs. urrent... Typical Spatial istribution... Reflow Soldering haracteristics... Notes... 7 Mechanical imensions... 8 Tape and Reel... 9 Packaging...0 Label with ree in ode, Qty, Lot #... 0 Label with ustomer Order ode,... 0 Qty, Reel I, PO#... 0 ree, Inc. 00 Silicon rive urham, N 770 US Tel:

2 XLMP XM-L LES FLUX HRTERISTIS (TJ = ) The following table provides several base order codes for XLamp XM-L LEs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L inning and Labeling document. olor T Range ase Order odes Min Luminous 700 m (lm) Order ode Min. Max. Group Flux (lm) ool White,000 K 8,00 K Neutral White,700 K,000 K Warm White,00 K,700 K T 0 XMLWT T0 T 80 XMLWT T0 T 0 XMLWT LT0E T 0 XMLWT LT0F T 00 XMLWT LT0E7 T 0 XMLWT LT0F7 Note: ree maintains a tolerance of +/- 7% on flux and power measurements. HRTERISTIS haracteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point /W. Viewing ngle (FWHM) degrees Temperature coefficient of voltage mv/ -.0 ES lassification (HM per Mil-Std-88) lass Forward urrent m 000 Reverse Voltage V Forward voltage (@ 700 m) V.9. Forward voltage (@ 00 m) V. Forward voltage (@ 000 m) V. LE Junction Temperature 0 opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc.

3 XLMP XM-L LES RELTIVE SPETRL POWER ISTRIUTION Relative 00 Spectral Power Relative Radiant Power (%) K -700K T 700K - 000K T 000K - 800K T Wavelength (nm) RELTIVE FLUX VS. JUNTION TEMPERTURE (I F = 700 M) 00% 90% Relative Luminous Flux 80% 70% 0% 0% 0% 0% 0% 0% 0% Junction Temperature (º) opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc.

4 XLMP XM-L LES ELETRIL Electrical haracteristics HRTERISTIS (Tj = º) (T J = ) Forward urrent (m) Forward Voltage (V) THERML ESIGN The maximum forward current is determined by the thermal resistance between the LE junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ool White ambient in order to optimize lamp life and optical characteristics Maximum urrent (m) Thermal esign Rj-a = /W Rj-a = 7 /W Rj-a = 0 /W Rj-a = /W mbient Temperature (º) opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc.

5 XLMP XM-L LES RELTIVE FLUX VS. URRENT (T J = ) Relative Luminous Flux (%) 0% % 00% 7% 0% % 00% 7% 0% % 00% 7% Typical Spatial Radiation Pattern 0% % 0% Forward urrent (m) TYPIL SPTIL ISTRIUTION 0 Relative Luminous Intensity (%) ngle (º) opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc.

6 XLMP XM-L LES REFLOW SOLERING HRTERISTIS In testing, ree has found XLamp XM-L LEs to be compatible with JEE J-ST-00, using the parameters listed below. s a general guideline, ree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all P designs and configurations of reflow soldering equipment. Profile Feature Lead-ased Solder Lead-Free Solder verage Ramp-Up Rate (Ts max to Tp) /second max. /second max. Preheat: Temperature Min (Ts min ) 00 0 Preheat: Temperature Max (Ts max ) 0 00 Preheat: Time (ts min to ts max ) 0-0 seconds 0-80 seconds Time Maintained bove: Temperature (T L ) 8 7 Time Maintained bove: Time (t L ) 0-0 seconds 0-0 seconds Peak/lassification Temperature (Tp) 0 Time Within of ctual Peak Temperature (tp) 0-0 seconds 0-0 seconds Ramp-own Rate /second max. /second max Time to Peak Temperature minutes max. 8 minutes max. Note: ll temperatures refer to the topside of the package, measured on the package body surface. opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc.

7 XLMP XM-L LES NOTES Lumen Maintenance Projections ree currently recommends a maximum drive current of 00 m for XLamp XM-L white in designs seeking the ENERGY STR*,000 hour lifetime rating ( 9.% luminous 000 hours) or,000-hour lifetime rating ( 9.8% luminous 000 hours). Please read the XLamp Long-Term Lumen Maintenance application note for more details on ree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LE junction temperature. * These lifetime ratings are based on the current ENERGY STR Solid State Lighting Luminaires V. (ecember, 008) and ENERGY STR Integral LE Lamps V.0 (ecember, 009) lumen maintenance criteria. Moisture Sensitivity In testing, ree has found XLamp XM-L LEs to have unlimited floor life in conditions 0º / 8% relative humidity (RH). Moisture testing included a 8 hour soak at 8º / 8% RH followed by reflow cycles, with visual and electrical inspections at each stage. Vision dvisory laim Users should be cautioned not to stare at the light of this LE product. The bright light can damage the eye. opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc. 7

8 .8 XLMP XM-L LES MEHNIL IMENSIONS.7.9 ll measurements are ±. mm unless otherwise indicated. 0. NOTIE REE ONFIENTIL. THIS PLOT N THE INFORMTION.7 ONTINE WITHIN RE THE PROPRIETRY N NOTIE ONFIENTIL INFORMTION OF REE, ONFIENTIL. IN. THIS PLOT THIS PLOT N THE INFORMTION MY NOT E OPIE, REPROUE ONTINE OR ISLOSE WITHIN TO RE NY THE PROPRIETRY N UNUTHORIZE PERSON WITHOUT ONFIENTIL THE WRITTEN INFORMTION ONSENT OF REE, IN. THIS PLOT OF REE IN. MY NOT E OPIE, REPROUE OR ISLOSE TO NY UNUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT OF REE IN. REVISONS REV ESRIPTION Y NEW RELESE REV ESRIPTION //0 dded die outline NEW SRELES 0// E IMENSION FOR TOP OF FLSH dded die /8/ outli.0 WS.09 E IMENSION FOR //T.0 WS.0 REOMMENE STENIL PTTERN SHE RE IS OPEN.00 THIR NGLE PROJETION UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN MILLIMETERS N FTER FINISH. TOLERNE UNLESS SPEIFIE:.XX ±..XXX ±..00 FOR SHEET METL PRTS ONLY.X ±..XX ±.7.XXX ±. SURFE FINISH:. RWN Y. RONIN HEK PPROVE MTERIL FINL PROTETIVE FINISH.0 SIZE.0 Phone (99) -00 Fax (99) OUTLINE RWING, 00 XM SLE.000 RWING NO. 0/9/ Silicon rive urham, N. 770 SHEET OF REV. / Top View Side View ottom View RWN Y UNLESS OTHERWISE SPEIFIE REOMMENE STENIL PTTERN 0 IMENSIONS RE IN. RONIN 0/9/0 RWN Y u HEK SHE RE IS OPEN MILLIMETERS N FTER FINISH. UNLESS OTHERWISE SPEIFIE REOMMENE STENIL PTTERN Ph REOMMENE P SOLER P TOLERNE UNLESS SPEIFIE: IMENSIONS RE IN. RONIN 0/9/0 Fa HEK SHE RE IS OPEN.XX ±. MILLIMETERS N FTER FINISH. PPROVE Recommended REOMMENE P SOLER Solder P Pad Recommended Stencil.XXX ± Pattern. TOLERNE UNLESS SPEIFIE:.XX ±. PPROVE THIR NGLE PROJETION (Shaded rea MTERIL OUTLINE RWING, FOR Is SHEET Open).XXX ±. METL PRTS ONLY THIR.X ± NGLE.PROJETION MTERIL SIZE RWING NO..XX ±.7 FOR SHEET METL PRTS ONLY.XXX ±. FINL PROTETIVE FINISH.X ± XX ±.7 SLE SHE SURFE FINISH:..XXX ±. FINL PROTETIVE FINISH.000 SURFE FINISH:. opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc. 8

9 XLMP XM-L LES TPE N REEL NOTIE REE ONFIENTIL. THIS PLOT N THE INFORMTION ONTINE WITHIN RE THE PROPRIETRY N NOTIE ONFIENTIL INFORMTION OF REE, IN. THIS PLOT REE ONFIENTIL. THIS PLOT NOTIE N THE INFORMTION MY NOT E OPIE, REPROUE OR ISLOSE TO NY ONTINE REE UNUTHORIZE ONFIENTIL. WITHIN RE THE PERSON THIS PROPRIETRY PLOT WITHOUT N N THE INFORMTION WRITTEN ONSENT ONFIENTIL ONTINE OF REE INFORMTION IN. WITHIN RE OF THE REE, PROPRIETRY IN. THIS PLOT N MY NOT ONFIENTIL E OPIE, INFORMTION REPROUE OF OR REE, ISLOSE IN. THIS TO PLOT NY UNUTHORIZE MY NOT E PERSON OPIE, WITHOUT REPROUE THE WRITTEN OR ISLOSE ONSENT TO NY OF REE UNUTHORIZE IN. PERSON WITHOUT THE WRITTEN ONSENT OF REE IN..00[.079] P.00[.079].00[.079] P.00[.7] P Po.00[.7].00[.7] Po Po o [ ] o o [ ] [.09] [ ] E.7[.09] E.7[.09] E REV REV.00[.7].0[.7]F NOMINL.00[.7].0[.7]F NOMINL.00[.7].0[.7]F 0..0 NOMINL [.8] [.0] MX 0..0 [.8] 0. E.0 [.8] W [.0] MX [.0] MX E W E W REV REVISIONS ESRIPTION REVISIONS REVISIONS Y PP' ESRIPTION Y PP' ESRIPTION POKET SIZE Y PP' o - POKET POKET.0mm SIZE SIZE [."] o o - o -.0mm -.0mm [."] [."] ll dimensions in mm. o o - Ko -.0mm -.0mm.mm [."] [."] [."] Ko Ko - -.mm.mm [."] [."].0.0[.].0 o.0[.].0.0[.] o o NOTIE TIL. THIS PLOT N THE INFORMTION HIN RE THE PROPRIETRY N NFORMTION OF REE, IN. THIS PLOT PIE, REPROUE OR ISLOSE TO NY PERSON WITHOUT THE WRITTEN ONSENT 8.00[.] P 8.00[.] 8.00[.] P P.0[.09].0[.09].0[.09] REVISONS.[.0] REV ESRIPTION T Y PP'.[.0] Loaded pocket count was T70.[.0] S /8/0 S T.[.] Ko.[.].[.] Ko Ko REE REFERENE RWING FOR TEK-PK RWING 087.0[.] REE REFERENE RWING FOR TEK-PK RWING 087 o RWN Y.0[.] UNLESS OTHERWISE REE REFERENE SPEIFIE RWING FOR TEK-PK RWING 087. RONIN //0 00 Silicon rive.0[.] IMENSIONS RE IN INHES urham, N. 770 o RWN Y User Feed irection HEK UNLESS OTHERWISE N FTER SPEIFIE FINISH. o. RONIN RWN Y //0 00 Silicon Phone rive (99) -00 IMENSIONS UNLESS TOLERNE RE OTHERWISE IN UNLESS INHES SPEIFIE:. RONIN //0 urham, 00 N. Fax Silicon (99) 770rive -8 N IMENSIONS FTER FINISH. RE IN INHESHEK.XX ±.0 PPROVE Phone (99) urham, -00 N. 770 N FTER FINISH. HEK 8 TOLERNE UNLESS.XXX SPEIFIE: ± Fax (99) Phone -8 (99) -00 TOLERNE EN THOE SIE.XX ± X UNLESS.0± SPEIFIE:. PPROVE Fax (99) -8 THIR NGLE PROJETION STRT MTERIL.XX ±.0 FOR.XXX SHEET ± METL.00 PRTS ONLY XM 00 PPROVE RRIER TPE X ±.XXX.00 NOTIE.X. ±.0 THIR NGLE PROJETION MTERIL SIZE RWING NO REV. REE ONFIENTIL. THIS PLOT N THE INFORMTION THIR NGLE PROJETIONFOR SHEET METL.XX PRTS ± ONLY XM.0 MTERIL FOR SHEET METL PRTS ONLY FINL PROTETIVE FINISH XM RRIER RRIER TPE TPE.XXX ±.00 INEX QTY ITEM OMMENTS ONTNE WITHIN RE THE PROPRIETRY N.X ± ONFIENTIL INFORMTION OF REE, IN. THIS PLOT.X X ± ±.0. SIZE RWING NO. REV..XX ±.0 SIZESLE RWING NO. REV..XX ±.0 FINL PROTETIVE FINISH SHEET OF MY NOT E OPIE, REPROUE OR ISLOSE TO NY.XXX SURFE ± FINISH: ORE FINL PROTETIVE FINISH UNUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT.XXX ±.00 RWING SLE REEL / OF REE IN. SLE SHEET OF SURFE FINISH: RWING SLE SHEET OF/ SURFE FINISH: RWING SLE / NOE SIE 7.0 Trailer 0mm (min) of empty pockets sealed with tape ( pockets min.) Loaded Pockets (000 Lamps) Leader 00mm (min.) of empty pockets with at least 00mm sealed by tape (0 empty pockets min.) MESURE T HU THIR NGLE PROJETION UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN MILLIMETERS N FTER FINISH. TOLERNE UNLESS SPEIFIE:.XX ±..XXX ±. FOR SHEET METL PRTS ONLY MESURE T HU.X ±. FINISH.XX ±.7.XXX ±. SURFE FINISH:..000 RWN Y. RONIN HEK PPROVE MTERIL 0/08/0. ±..9± Silicon rive urham, N. 770 Phone (99) -00 Fax (99) -8 XM LOING SPE SHEET OF REV. / ± MESURE T EGE 0 0 opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc. RWN Y UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES. RONIN 09/9/09 N FTER FINISH. HEK TOLERNE UNLESS SPEIFIE:.XX ±.0 PPROVE.XXX ±.00 THIR NGLE PROJETION MTERIL REVISONS REV ESRIPTION Y PP' 00 Silicon rive urham, N Phone (99) -00 Fax (99) -8 REEL, " X MM, PIEE SNP

10 PKGING Humidity Humidity Indicator Indicator ard (inside (inside bag) bag) essicant esiccant XLMP XM-L LES (inside bag) bag) Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag REE Label in with ode ree in & ode, arcode Qty, Label Lot # REE Label in with oderee in & ode, arcode Qty, Label Lot # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Patent Label Label with ustomer Order ode, Qty, Reel I, PO # Label with ustomer Order ode, Qty, Reel I, PO # Label with ustomer Order ode, Qty, Reel I, PO# Label with ree in ode, Qty, Lot # opyright 00-0 ree, ree, Inc. ll Inc. rights ll rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. ree, ree, the ree the logo ree and logo XLamp and XLamp are registered are registered trademarks trademarks ree, of Inc. ree, of Inc. 0